From 405831f45bb993fb96405c95b5895a369a454ae7 Mon Sep 17 00:00:00 2001
From: hnu202409060624 <2804411502@qq.com>
Date: Mon, 30 Dec 2024 18:25:21 +0800
Subject: [PATCH] ADD file via upload

---
 attention.py | 115 +++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 115 insertions(+)
 create mode 100644 attention.py

diff --git a/attention.py b/attention.py
new file mode 100644
index 0000000..15d8286
--- /dev/null
+++ b/attention.py
@@ -0,0 +1,115 @@
+import torch
+from torch import nn
+import config
+import torch.nn.functional as F
+class ScaledDotProductAttention(nn.Module):
+    """ Scaled Dot-Product Attention """
+
+    def __init__(self, scale_factor=16, dropout=config.dropout):
+        super().__init__()
+        self.scale_factor = scale_factor
+        # dropout用于防止过拟合，在前向传播的过程中，让某个神经元的激活值以一定的概率停止工作
+        self.dropout = nn.Dropout(dropout)
+
+    def forward(self, q, k, v, mask=None):
+        # batch_size: 批量大小
+        # len_q,len_k,len_v: 序列长度 在这里他们都相等
+        # n_head: 多头注意力，论文中默认为8
+        # d_k,d_v: k v 的dim(维度) 默认都是64
+        # 此时q的shape为(batch_size, n_head, len_q, d_k) (batch_size, 8, len_q, 64)
+        # 此时k的shape为(batch_size, n_head, len_k, d_k) (batch_size, 8, len_k, 64)
+        # 此时v的shape为(batch_size, n_head, len_k, d_v) (batch_size, 8, len_k, 64)
+        # q先除以self.scale_factor，再乘以k的转置(交换最后两个维度(这样才可以进行矩阵相乘))。
+        # attn的shape为(batch_size, n_head, len_q, len_k)
+
+        attn = torch.matmul(q / self.scale_factor, k.transpose(2, 3))
+
+        if mask is not None:
+
+            """
+            用-1e9代替0 -1e9是一个很大的负数 经过softmax之后接近0
+            # 其一：去除掉各种padding在训练过程中的影响
+            # 其二，将输入进行遮盖，避免decoder看到后面要预测的东西。（只用在decoder中）
+            """
+            attn = attn.masked_fill(mask.to('cuda:0') == 0, -1e9)
+        # 先在attn的最后一个维度做softmax 再dropout 得到注意力分数
+        attn = self.dropout(torch.softmax(attn, dim=-1))
+        # 最后attn与v矩阵相乘
+        # output的shape为(batch_size, 8, len_q, 64)
+        output = torch.matmul(attn, v)
+        # 返回 output和注意力分数
+        return output, attn
+
+class MultiHeadAttention(nn.Module):
+    """ Multi-Head Attention module """
+
+    def __init__(self, n_head=config.n_head, d_model=config.input_dim, d_k=config.input_dim//2, d_v=config.hidden_dim//2, dropout=config.dropout):
+        # 论文中这里的n_head, d_model, d_k, d_v分别默认为8, 512, 64, 64
+        '''
+        # q k v先经过不同的线性层，再用ScaledDotProductAttention，最后再经过一个线性层
+        '''
+        super().__init__()
+
+        self.n_head = n_head
+        self.d_k = d_k
+        self.d_v = d_v
+
+        self.w_qs = nn.Linear(d_model, n_head * d_k, bias=config.bias)
+        self.w_ks = nn.Linear(d_model, n_head * d_k, bias=config.bias)
+        self.w_vs = nn.Linear(d_model, n_head * d_v, bias=config.bias)
+        self.fc = nn.Linear(n_head * d_v, d_model, bias=config.bias)
+
+        self.attention = ScaledDotProductAttention(scale_factor=d_k ** 0.5)
+
+        self.dropout = nn.Dropout(dropout)
+        self.layer_norm = nn.LayerNorm(d_model, eps=1e-6)  # 默认对最后一个维度初始化
+
+    def forward(self, q, k, v, mask=None):
+        # q, k, v初次输入为含位置信息的嵌入矩阵X，由于要堆叠N次，后面的输入则是上个多头的输出
+        # q, k, v：batch_size * seq_num * d_model
+        d_k, d_v, n_head = self.d_k, self.d_v, self.n_head
+        # len_q, len_k, len_v 为输入的序列长度
+        # batch_size为batch_size
+        batch_size, len_q, len_k, len_v = q.size(0), q.size(1), k.size(1), v.size(1)
+        # 用作残差连接
+        residual = q
+        # Pass through the pre-attention projection: b x lq x (n*dv)
+        # Separate different heads: b x lq x n x dv
+        # q k v 分别经过一个线性层再改变维度
+        # 由(batch_size, len_q, n_head*d_k) => (batch_size, len_q, n_head, d_k)
+        # (batch_size, len_q, 8*64) => (batch_size, len_q, 8, 64)
+        q = self.layer_norm(q)
+        k = self.layer_norm(k)
+        v = self.layer_norm(v)
+
+        # 与q,k,v相关矩阵相乘，得到相应的q,k,v向量，d_model=n_head * d_k
+        q = self.w_qs(q).view(batch_size, len_q, n_head, d_k)
+        k = self.w_ks(k).view(batch_size, len_k, n_head, d_k)
+        v = self.w_vs(v).view(batch_size, len_v, n_head, d_v)
+
+        # Transpose for attention dot product: b x n x lq x dv
+        # 交换维度做attention
+        # 由(batch_size, len_q, n_head, d_k) => (batch_size, n_head, len_q, d_k)
+        # (batch_size, len_q, 8, 64) => (batch_size, 8, len_q, 64)
+        q, k, v = q.transpose(1, 2), k.transpose(1, 2), v.transpose(1, 2)
+
+
+        # 输出的q为Softmax(QK/d + (1-S)σ)V, attn 为QK/D
+        q, attn = self.attention(q, k, v, mask=None)
+
+        # Transpose to move the head dimension back: b x lq x n x dv
+        # Combine the last two dimensions to concatenate all the heads together: b x lq x (n*dv)
+        # (batch_size, 8, len_k, 64) => (batch_size, len_k, 8, 64) => (batch_size, len_k, 512)
+        q = q.transpose(1, 2).contiguous().view(batch_size, len_q, -1)
+
+        # 经过fc和dropout
+        q = self.dropout(self.fc(q))
+
+        # 残差连接 论文中的Add & Norm中的Add
+        q += residual
+        # 论文中的Add & Norm中的Norm
+        q = self.layer_norm(q)
+        # q的shape为(batch_size, len_q, 512)
+        # attn的shape为(batch_size, n_head, len_q, len_k)
+        return q, attn
+