diff --git a/src/afl-fuzz.c b/src/afl-fuzz.c index 46a216c..9626ae0 100644 --- a/src/afl-fuzz.c +++ b/src/afl-fuzz.c @@ -404,6 +404,8204 @@ static void shuffle_ptrs(void** ptrs, u32 cnt) { } +#ifdef HAVE_AFFINITY + +/* Build a list of processes bound to specific cores. Returns -1 if nothing + can be found. Assumes an upper bound of 4k CPUs. */ +//绑定到空闲CPU核心。如果可能，这个函数会将AFL的进程绑定到一个空闲的CPU核心上，以减少上下文切换和调度延迟。 +static void bind_to_free_cpu(void) { + + DIR* d; + struct dirent* de; + cpu_set_t c; + + u8 cpu_used[4096] = { 0 }; + u32 i; + + if (cpu_core_count < 2) return; + + if (getenv("AFL_NO_AFFINITY")) { + + WARNF("Not binding to a CPU core (AFL_NO_AFFINITY set)."); + return; + + } + + d = opendir("/proc"); + + if (!d) { + + WARNF("Unable to access /proc - can't scan for free CPU cores."); + return; + + } + + ACTF("Checking CPU core loadout..."); + + /* Introduce some jitter, in case multiple AFL tasks are doing the same + thing at the same time... */ + + usleep(R(1000) * 250); + + /* Scan all /proc//status entries, checking for Cpus_allowed_list. + Flag all processes bound to a specific CPU using cpu_used[]. This will + fail for some exotic binding setups, but is likely good enough in almost + all real-world use cases. */ + + while ((de = readdir(d))) { + + u8* fn; + FILE* f; + u8 tmp[MAX_LINE]; + u8 has_vmsize = 0; + + if (!isdigit(de->d_name[0])) continue; + + fn = alloc_printf("/proc/%s/status", de->d_name); + + if (!(f = fopen(fn, "r"))) { + ck_free(fn); + continue; + } + + while (fgets(tmp, MAX_LINE, f)) { + + u32 hval; + + /* Processes without VmSize are probably kernel tasks. */ + + if (!strncmp(tmp, "VmSize:\t", 8)) has_vmsize = 1; + + if (!strncmp(tmp, "Cpus_allowed_list:\t", 19) && + !strchr(tmp, '-') && !strchr(tmp, ',') && + sscanf(tmp + 19, "%u", &hval) == 1 && hval < sizeof(cpu_used) && + has_vmsize) { + + cpu_used[hval] = 1; + break; + + } + + } + + ck_free(fn); + fclose(f); + + } + + closedir(d); + if (cpu_to_bind_given) { + + if (cpu_to_bind >= cpu_core_count) + FATAL("The CPU core id to bind should be between 0 and %u", cpu_core_count - 1); + + if (cpu_used[cpu_to_bind]) + FATAL("The CPU core #%u to bind is not free!", cpu_to_bind); + + i = cpu_to_bind; + + } else { + + for (i = 0; i < cpu_core_count; i++) if (!cpu_used[i]) break; + + } + + if (i == cpu_core_count) { + + SAYF("\n" cLRD "[-] " cRST + "Uh-oh, looks like all %u CPU cores on your system are allocated to\n" + " other instances of afl-fuzz (or similar CPU-locked tasks). Starting\n" + " another fuzzer on this machine is probably a bad plan, but if you are\n" + " absolutely sure, you can set AFL_NO_AFFINITY and try again.\n", + cpu_core_count); + + FATAL("No more free CPU cores"); + + } + + OKF("Found a free CPU core, binding to #%u.", i); + + cpu_aff = i; + + CPU_ZERO(&c); + CPU_SET(i, &c); + + if (sched_setaffinity(0, sizeof(c), &c)) + PFATAL("sched_setaffinity failed"); + +} + +#endif /* HAVE_AFFINITY */ + +#ifndef IGNORE_FINDS + +/* Helper function to compare buffers; returns first and last differing offset. We + use this to find reasonable locations for splicing two files. */ + +static void locate_diffs(u8* ptr1, u8* ptr2, u32 len, s32* first, s32* last) { + + s32 f_loc = -1; + s32 l_loc = -1; + u32 pos; + + for (pos = 0; pos < len; pos++) { + + if (*(ptr1++) != *(ptr2++)) { + + if (f_loc == -1) f_loc = pos; + l_loc = pos; + + } + + } + + *first = f_loc; + *last = l_loc; + + return; + +} + +#endif /* !IGNORE_FINDS */ + + +/* Describe integer. Uses 12 cyclic static buffers for return values. The value + returned should be five characters or less for all the integers we reasonably + expect to see. */ + +static u8* DI(u64 val) { + + static u8 tmp[12][16]; + static u8 cur; + + cur = (cur + 1) % 12; + +#define CHK_FORMAT(_divisor, _limit_mult, _fmt, _cast) do { \ + if (val < (_divisor) * (_limit_mult)) { \ + sprintf(tmp[cur], _fmt, ((_cast)val) / (_divisor)); \ + return tmp[cur]; \ + } \ + } while (0) + + /* 0-9999 */ + CHK_FORMAT(1, 10000, "%llu", u64); + + /* 10.0k - 99.9k */ + CHK_FORMAT(1000, 99.95, "%0.01fk", double); + + /* 100k - 999k */ + CHK_FORMAT(1000, 1000, "%lluk", u64); + + /* 1.00M - 9.99M */ + CHK_FORMAT(1000 * 1000, 9.995, "%0.02fM", double); + + /* 10.0M - 99.9M */ + CHK_FORMAT(1000 * 1000, 99.95, "%0.01fM", double); + + /* 100M - 999M */ + CHK_FORMAT(1000 * 1000, 1000, "%lluM", u64); + + /* 1.00G - 9.99G */ + CHK_FORMAT(1000LL * 1000 * 1000, 9.995, "%0.02fG", double); + + /* 10.0G - 99.9G */ + CHK_FORMAT(1000LL * 1000 * 1000, 99.95, "%0.01fG", double); + + /* 100G - 999G */ + CHK_FORMAT(1000LL * 1000 * 1000, 1000, "%lluG", u64); + + /* 1.00T - 9.99G */ + CHK_FORMAT(1000LL * 1000 * 1000 * 1000, 9.995, "%0.02fT", double); + + /* 10.0T - 99.9T */ + CHK_FORMAT(1000LL * 1000 * 1000 * 1000, 99.95, "%0.01fT", double); + + /* 100T+ */ + strcpy(tmp[cur], "infty"); + return tmp[cur]; + +} + + +/* Describe float. Similar to the above, except with a single + static buffer. */ + +static u8* DF(double val) { + + static u8 tmp[16]; + + if (val < 99.995) { + sprintf(tmp, "%0.02f", val); + return tmp; + } + + if (val < 999.95) { + sprintf(tmp, "%0.01f", val); + return tmp; + } + + return DI((u64)val); + +} + + +/* Describe integer as memory size. */ + +static u8* DMS(u64 val) { + + static u8 tmp[12][16]; + static u8 cur; + + cur = (cur + 1) % 12; + + /* 0-9999 */ + CHK_FORMAT(1, 10000, "%llu B", u64); + + /* 10.0k - 99.9k */ + CHK_FORMAT(1024, 99.95, "%0.01f kB", double); + + /* 100k - 999k */ + CHK_FORMAT(1024, 1000, "%llu kB", u64); + + /* 1.00M - 9.99M */ + CHK_FORMAT(1024 * 1024, 9.995, "%0.02f MB", double); + + /* 10.0M - 99.9M */ + CHK_FORMAT(1024 * 1024, 99.95, "%0.01f MB", double); + + /* 100M - 999M */ + CHK_FORMAT(1024 * 1024, 1000, "%llu MB", u64); + + /* 1.00G - 9.99G */ + CHK_FORMAT(1024LL * 1024 * 1024, 9.995, "%0.02f GB", double); + + /* 10.0G - 99.9G */ + CHK_FORMAT(1024LL * 1024 * 1024, 99.95, "%0.01f GB", double); + + /* 100G - 999G */ + CHK_FORMAT(1024LL * 1024 * 1024, 1000, "%llu GB", u64); + + /* 1.00T - 9.99G */ + CHK_FORMAT(1024LL * 1024 * 1024 * 1024, 9.995, "%0.02f TB", double); + + /* 10.0T - 99.9T */ + CHK_FORMAT(1024LL * 1024 * 1024 * 1024, 99.95, "%0.01f TB", double); + +#undef CHK_FORMAT + + /* 100T+ */ + strcpy(tmp[cur], "infty"); + return tmp[cur]; + +} + + +/* Describe time delta. Returns one static buffer, 34 chars of less. */ + +static u8* DTD(u64 cur_ms, u64 event_ms) { + + static u8 tmp[64]; + u64 delta; + s32 t_d, t_h, t_m, t_s; + + if (!event_ms) return "none seen yet"; + + delta = cur_ms - event_ms; + + t_d = delta / 1000 / 60 / 60 / 24; + t_h = (delta / 1000 / 60 / 60) % 24; + t_m = (delta / 1000 / 60) % 60; + t_s = (delta / 1000) % 60; + + sprintf(tmp, "%s days, %u hrs, %u min, %u sec", DI(t_d), t_h, t_m, t_s); + return tmp; + +} + + +/* Mark deterministic checks as done for a particular queue entry. We use the + .state file to avoid repeating deterministic fuzzing when resuming aborted + scans. */ +//mark_as_det_done 和 mark_as_variable共同用于标记测试用例的状态，用于标记测试用例是否已经完成了确定性的测试，或者是否表现出可变的行为。 +static void mark_as_det_done(struct queue_entry* q) { + + u8* fn = strrchr(q->fname, '/'); + s32 fd; + + fn = alloc_printf("%s/queue/.state/deterministic_done/%s", out_dir, fn + 1); + + fd = open(fn, O_WRONLY | O_CREAT | O_EXCL, 0600); + if (fd < 0) PFATAL("Unable to create '%s'", fn); + close(fd); + + ck_free(fn); + + q->passed_det = 1; + +} + + +/* Mark as variable. Create symlinks if possible to make it easier to examine + the files. */ + +static void mark_as_variable(struct queue_entry* q) { + + u8 *fn = strrchr(q->fname, '/') + 1, *ldest; + + ldest = alloc_printf("../../%s", fn); + fn = alloc_printf("%s/queue/.state/variable_behavior/%s", out_dir, fn); + + if (symlink(ldest, fn)) { + + s32 fd = open(fn, O_WRONLY | O_CREAT | O_EXCL, 0600); + if (fd < 0) PFATAL("Unable to create '%s'", fn); + close(fd); + + } + + ck_free(ldest); + ck_free(fn); + + q->var_behavior = 1; + +} + + +/* Mark / unmark as redundant (edge-only). This is not used for restoring state, + but may be useful for post-processing datasets. */ + +static void mark_as_redundant(struct queue_entry* q, u8 state) { + + u8* fn; + s32 fd; + + if (state == q->fs_redundant) return; + + q->fs_redundant = state; + + fn = strrchr(q->fname, '/'); + fn = alloc_printf("%s/queue/.state/redundant_edges/%s", out_dir, fn + 1); + + if (state) { + + fd = open(fn, O_WRONLY | O_CREAT | O_EXCL, 0600); + if (fd < 0) PFATAL("Unable to create '%s'", fn); + close(fd); + + } else { + + if (unlink(fn)) PFATAL("Unable to remove '%s'", fn); + + } + + ck_free(fn); + +} + + +/* Append new test case to the queue. */ + +static void add_to_queue(u8* fname, u32 len, u8 passed_det) { + + struct queue_entry* q = ck_alloc(sizeof(struct queue_entry)); + + q->fname = fname; + q->len = len; + q->depth = cur_depth + 1; + q->passed_det = passed_det; + + if (q->depth > max_depth) max_depth = q->depth; + + if (queue_top) { + + queue_top->next = q; + queue_top = q; + + } else q_prev100 = queue = queue_top = q; + + queued_paths++; + pending_not_fuzzed++; + + cycles_wo_finds = 0; + + /* Set next_100 pointer for every 100th element (index 0, 100, etc) to allow faster iteration. */ + if ((queued_paths - 1) % 100 == 0 && queued_paths > 1) { + + q_prev100->next_100 = q; + q_prev100 = q; + + } + + last_path_time = get_cur_time(); + +} + + +/* Destroy the entire queue. */ +//销毁队列的函数。它释放与测试用例队列相关的所有内存资源。 +EXP_ST void destroy_queue(void) { + + struct queue_entry *q = queue, *n; + + while (q) { + + n = q->next; + ck_free(q->fname); + ck_free(q->trace_mini); + ck_free(q); + q = n; + + } + +} + + +/* Write bitmap to file. The bitmap is useful mostly for the secret + -B option, to focus a separate fuzzing session on a particular + interesting input without rediscovering all the others. */ + +EXP_ST void write_bitmap(void) { + + u8* fname; + s32 fd; + + if (!bitmap_changed) return; + bitmap_changed = 0; + + fname = alloc_printf("%s/fuzz_bitmap", out_dir); + fd = open(fname, O_WRONLY | O_CREAT | O_TRUNC, 0600); + + if (fd < 0) PFATAL("Unable to open '%s'", fname); + + ck_write(fd, virgin_bits, MAP_SIZE, fname); + + close(fd); + ck_free(fname); + +} + + +/* Read bitmap from file. This is for the -B option again. */ + +EXP_ST void read_bitmap(u8* fname) { + + s32 fd = open(fname, O_RDONLY); + + if (fd < 0) PFATAL("Unable to open '%s'", fname); + + ck_read(fd, virgin_bits, MAP_SIZE, fname); + + close(fd); + +} + + +/* Check if the current execution path brings anything new to the table. + Update virgin bits to reflect the finds. Returns 1 if the only change is + the hit-count for a particular tuple; 2 if there are new tuples seen. + Updates the map, so subsequent calls will always return 0. + + This function is called after every exec() on a fairly large buffer, so + it needs to be fast. We do this in 32-bit and 64-bit flavors. */ +//检查执行路径是否带来了新的位图信息。这有助于AFL确定一个测试用例是否探索了新的代码路径。 +static inline u8 has_new_bits(u8* virgin_map) { + +#ifdef WORD_SIZE_64 + + u64* current = (u64*)trace_bits; + u64* virgin = (u64*)virgin_map; + + u32 i = (MAP_SIZE >> 3); + +#else + + u32* current = (u32*)trace_bits; + u32* virgin = (u32*)virgin_map; + + u32 i = (MAP_SIZE >> 2); + +#endif /* ^WORD_SIZE_64 */ + + u8 ret = 0; + + while (i--) { + + /* Optimize for (*current & *virgin) == 0 - i.e., no bits in current bitmap + that have not been already cleared from the virgin map - since this will + almost always be the case. */ + + if (unlikely(*current) && unlikely(*current & *virgin)) { + + if (likely(ret < 2)) { + + u8* cur = (u8*)current; + u8* vir = (u8*)virgin; + + /* Looks like we have not found any new bytes yet; see if any non-zero + bytes in current[] are pristine in virgin[]. */ + +#ifdef WORD_SIZE_64 + + if ((cur[0] && vir[0] == 0xff) || (cur[1] && vir[1] == 0xff) || + (cur[2] && vir[2] == 0xff) || (cur[3] && vir[3] == 0xff) || + (cur[4] && vir[4] == 0xff) || (cur[5] && vir[5] == 0xff) || + (cur[6] && vir[6] == 0xff) || (cur[7] && vir[7] == 0xff)) ret = 2; + else ret = 1; + +#else + + if ((cur[0] && vir[0] == 0xff) || (cur[1] && vir[1] == 0xff) || + (cur[2] && vir[2] == 0xff) || (cur[3] && vir[3] == 0xff)) ret = 2; + else ret = 1; + +#endif /* ^WORD_SIZE_64 */ + + } + + *virgin &= ~*current; + + } + + current++; + virgin++; + + } + + if (ret && virgin_map == virgin_bits) bitmap_changed = 1; + + return ret; + +} + + +/* Count the number of bits set in the provided bitmap. Used for the status + screen several times every second, does not have to be fast. */ +//计算位图中设置的位数，用于评估测试用例的覆盖率。 +static u32 count_bits(u8* mem) { + + u32* ptr = (u32*)mem; + u32 i = (MAP_SIZE >> 2); + u32 ret = 0; + + while (i--) { + + u32 v = *(ptr++); + + /* This gets called on the inverse, virgin bitmap; optimize for sparse + data. */ + + if (v == 0xffffffff) { + ret += 32; + continue; + } + + v -= ((v >> 1) & 0x55555555); + v = (v & 0x33333333) + ((v >> 2) & 0x33333333); + ret += (((v + (v >> 4)) & 0xF0F0F0F) * 0x01010101) >> 24; + + } + + return ret; + +} + + +#define FF(_b) (0xff << ((_b) << 3)) + +/* Count the number of bytes set in the bitmap. Called fairly sporadically, + mostly to update the status screen or calibrate and examine confirmed + new paths. */ +//计算位图中设置的字节数，用于评估测试用例的覆盖率。 +static u32 count_bytes(u8* mem) { + + u32* ptr = (u32*)mem; + u32 i = (MAP_SIZE >> 2); + u32 ret = 0; + + while (i--) { + + u32 v = *(ptr++); + + if (!v) continue; + if (v & FF(0)) ret++; + if (v & FF(1)) ret++; + if (v & FF(2)) ret++; + if (v & FF(3)) ret++; + + } + + return ret; + +} + + +/* Count the number of non-255 bytes set in the bitmap. Used strictly for the + status screen, several calls per second or so. */ + +static u32 count_non_255_bytes(u8* mem) { + + u32* ptr = (u32*)mem; + u32 i = (MAP_SIZE >> 2); + u32 ret = 0; + + while (i--) { + + u32 v = *(ptr++); + + /* This is called on the virgin bitmap, so optimize for the most likely + case. */ + + if (v == 0xffffffff) continue; + if ((v & FF(0)) != FF(0)) ret++; + if ((v & FF(1)) != FF(1)) ret++; + if ((v & FF(2)) != FF(2)) ret++; + if ((v & FF(3)) != FF(3)) ret++; + + } + + return ret; + +} + + +/* Destructively simplify trace by eliminating hit count information + and replacing it with 0x80 or 0x01 depending on whether the tuple + is hit or not. Called on every new crash or timeout, should be + reasonably fast. */ + +static const u8 simplify_lookup[256] = { + + [0] = 1, + [1 ... 255] = 128 + +}; + +#ifdef WORD_SIZE_64 +//简化跟踪信息，处理执行跟踪数据，以便更高效地存储和比较。 +static void simplify_trace(u64* mem) { + + u32 i = MAP_SIZE >> 3; + + while (i--) { + + /* Optimize for sparse bitmaps. */ + + if (unlikely(*mem)) { + + u8* mem8 = (u8*)mem; + + mem8[0] = simplify_lookup[mem8[0]]; + mem8[1] = simplify_lookup[mem8[1]]; + mem8[2] = simplify_lookup[mem8[2]]; + mem8[3] = simplify_lookup[mem8[3]]; + mem8[4] = simplify_lookup[mem8[4]]; + mem8[5] = simplify_lookup[mem8[5]]; + mem8[6] = simplify_lookup[mem8[6]]; + mem8[7] = simplify_lookup[mem8[7]]; + + } else *mem = 0x0101010101010101ULL; + + mem++; + + } + +} + +#else + +static void simplify_trace(u32* mem) { + + u32 i = MAP_SIZE >> 2; + + while (i--) { + + /* Optimize for sparse bitmaps. */ + + if (unlikely(*mem)) { + + u8* mem8 = (u8*)mem; + + mem8[0] = simplify_lookup[mem8[0]]; + mem8[1] = simplify_lookup[mem8[1]]; + mem8[2] = simplify_lookup[mem8[2]]; + mem8[3] = simplify_lookup[mem8[3]]; + + } else *mem = 0x01010101; + + mem++; + } + +} + +#endif /* ^WORD_SIZE_64 */ + + +/* Destructively classify execution counts in a trace. This is used as a + preprocessing step for any newly acquired traces. Called on every exec, + must be fast. */ + +static const u8 count_class_lookup8[256] = { + + [0] = 0, + [1] = 1, + [2] = 2, + [3] = 4, + [4 ... 7] = 8, + [8 ... 15] = 16, + [16 ... 31] = 32, + [32 ... 127] = 64, + [128 ... 255] = 128 + +}; + +static u16 count_class_lookup16[65536]; + +//初始化计数分类表。这个函数用于设置一个查找表，该表用于快速分类和处理执行跟踪数据。 +EXP_ST void init_count_class16(void) { + + u32 b1, b2; + + for (b1 = 0; b1 < 256; b1++) + for (b2 = 0; b2 < 256; b2++) + count_class_lookup16[(b1 << 8) + b2] = + (count_class_lookup8[b1] << 8) | + count_class_lookup8[b2]; + +} + + +#ifdef WORD_SIZE_64 +//分类执行跟踪信息，处理执行跟踪数据，以便更高效地存储和比较。 +static inline void classify_counts(u64* mem) { + + u32 i = MAP_SIZE >> 3; + + while (i--) { + + /* Optimize for sparse bitmaps. */ + + if (unlikely(*mem)) { + + u16* mem16 = (u16*)mem; + + mem16[0] = count_class_lookup16[mem16[0]]; + mem16[1] = count_class_lookup16[mem16[1]]; + mem16[2] = count_class_lookup16[mem16[2]]; + mem16[3] = count_class_lookup16[mem16[3]]; + + } + + mem++; + + } + +} + +#else + +static inline void classify_counts(u32* mem) { + + u32 i = MAP_SIZE >> 2; + + while (i--) { + + /* Optimize for sparse bitmaps. */ + + if (unlikely(*mem)) { + + u16* mem16 = (u16*)mem; + + mem16[0] = count_class_lookup16[mem16[0]]; + mem16[1] = count_class_lookup16[mem16[1]]; + + } + + mem++; + + } + +} + +#endif /* ^WORD_SIZE_64 */ + + +/* Get rid of shared memory (atexit handler). */ + +static void remove_shm(void) { + + shmctl(shm_id, IPC_RMID, NULL); + +} + + +/* Compact trace bytes into a smaller bitmap. We effectively just drop the + count information here. This is called only sporadically, for some + new paths. */ + +static void minimize_bits(u8* dst, u8* src) { + + u32 i = 0; + + while (i < MAP_SIZE) { + + if (*(src++)) dst[i >> 3] |= 1 << (i & 7); + i++; + + } + +} + + +/* When we bump into a new path, we call this to see if the path appears + more "favorable" than any of the existing ones. The purpose of the + "favorables" is to have a minimal set of paths that trigger all the bits + seen in the bitmap so far, and focus on fuzzing them at the expense of + the rest. + + The first step of the process is to maintain a list of top_rated[] entries + for every byte in the bitmap. We win that slot if there is no previous + contender, or if the contender has a more favorable speed x size factor. */ +//更新位图分数的函数。它根据测试用例的执行时间和覆盖率来调整其在队列中的优先级。 +static void update_bitmap_score(struct queue_entry* q) { + + u32 i; + u64 fav_factor = q->exec_us * q->len; + + /* For every byte set in trace_bits[], see if there is a previous winner, + and how it compares to us. */ + + for (i = 0; i < MAP_SIZE; i++) + + if (trace_bits[i]) { + + if (top_rated[i]) { + + /* Faster-executing or smaller test cases are favored. */ + + if (fav_factor > top_rated[i]->exec_us * top_rated[i]->len) continue; + + /* Looks like we're going to win. Decrease ref count for the + previous winner, discard its trace_bits[] if necessary. */ + + if (!--top_rated[i]->tc_ref) { + ck_free(top_rated[i]->trace_mini); + top_rated[i]->trace_mini = 0; + } + + } + + /* Insert ourselves as the new winner. */ + + top_rated[i] = q; + q->tc_ref++; + + if (!q->trace_mini) { + q->trace_mini = ck_alloc(MAP_SIZE >> 3); + minimize_bits(q->trace_mini, trace_bits); + } + + score_changed = 1; + + } + +} + + +/* The second part of the mechanism discussed above is a routine that + goes over top_rated[] entries, and then sequentially grabs winners for + previously-unseen bytes (temp_v) and marks them as favored, at least + until the next run. The favored entries are given more air time during + all fuzzing steps. */ +//筛选队列的函数。它通过评估队列中的测试用例，移除那些不再需要进一步测试的案例，以优化模糊测试的效率。 +static void cull_queue(void) { + + struct queue_entry* q; + static u8 temp_v[MAP_SIZE >> 3]; + u32 i; + + if (dumb_mode || !score_changed) return; + + score_changed = 0; + + memset(temp_v, 255, MAP_SIZE >> 3); + + queued_favored = 0; + pending_favored = 0; + + q = queue; + + while (q) { + q->favored = 0; + q = q->next; + } + + /* Let's see if anything in the bitmap isn't captured in temp_v. + If yes, and if it has a top_rated[] contender, let's use it. */ + + for (i = 0; i < MAP_SIZE; i++) + if (top_rated[i] && (temp_v[i >> 3] & (1 << (i & 7)))) { + + u32 j = MAP_SIZE >> 3; + + /* Remove all bits belonging to the current entry from temp_v. */ + + while (j--) + if (top_rated[i]->trace_mini[j]) + temp_v[j] &= ~top_rated[i]->trace_mini[j]; + + top_rated[i]->favored = 1; + queued_favored++; + + if (!top_rated[i]->was_fuzzed) pending_favored++; + + } + + q = queue; + + while (q) { + mark_as_redundant(q, !q->favored); + q = q->next; + } + +} + + +/* Configure shared memory and virgin_bits. This is called at startup. */ +//设置共享内存。共享内存用于存储位图和其他状态信息，这些信息在目标程序的多个实例之间共享。 +EXP_ST void setup_shm(void) { + + u8* shm_str; + + if (!in_bitmap) memset(virgin_bits, 255, MAP_SIZE); + + memset(virgin_tmout, 255, MAP_SIZE); + memset(virgin_crash, 255, MAP_SIZE); + + shm_id = shmget(IPC_PRIVATE, MAP_SIZE, IPC_CREAT | IPC_EXCL | 0600); + + if (shm_id < 0) PFATAL("shmget() failed"); + + atexit(remove_shm); + + shm_str = alloc_printf("%d", shm_id); + + /* If somebody is asking us to fuzz instrumented binaries in dumb mode, + we don't want them to detect instrumentation, since we won't be sending + fork server commands. This should be replaced with better auto-detection + later on, perhaps? */ + + if (!dumb_mode) setenv(SHM_ENV_VAR, shm_str, 1); + + ck_free(shm_str); + + trace_bits = shmat(shm_id, NULL, 0); + + if (trace_bits == (void *)-1) PFATAL("shmat() failed"); + +} + + +/* Load postprocessor, if available. */ + +static void setup_post(void) { + + void* dh; + u8* fn = getenv("AFL_POST_LIBRARY"); + u32 tlen = 6; + + if (!fn) return; + + ACTF("Loading postprocessor from '%s'...", fn); + + dh = dlopen(fn, RTLD_NOW); + if (!dh) FATAL("%s", dlerror()); + + post_handler = dlsym(dh, "afl_postprocess"); + if (!post_handler) FATAL("Symbol 'afl_postprocess' not found."); + + /* Do a quick test. It's better to segfault now than later =) */ + + post_handler("hello", &tlen); + + OKF("Postprocessor installed successfully."); + +} + + +/* Read all testcases from the input directory, then queue them for testing. + Called at startup. */ +//从输入目录中读取所有测试用例，并将它们排队以供测试。 +static void read_testcases(void) { + + struct dirent **nl; + s32 nl_cnt; + u32 i; + u8* fn; + + /* Auto-detect non-in-place resumption attempts. */ + + fn = alloc_printf("%s/queue", in_dir); + if (!access(fn, F_OK)) in_dir = fn; else ck_free(fn); + + ACTF("Scanning '%s'...", in_dir); + + /* We use scandir() + alphasort() rather than readdir() because otherwise, + the ordering of test cases would vary somewhat randomly and would be + difficult to control. */ + + nl_cnt = scandir(in_dir, &nl, NULL, alphasort); + + if (nl_cnt < 0) { + + if (errno == ENOENT || errno == ENOTDIR) + + SAYF("\n" cLRD "[-] " cRST + "The input directory does not seem to be valid - try again. The fuzzer needs\n" + " one or more test case to start with - ideally, a small file under 1 kB\n" + " or so. The cases must be stored as regular files directly in the input\n" + " directory.\n"); + + PFATAL("Unable to open '%s'", in_dir); + + } + + if (shuffle_queue && nl_cnt > 1) { + + ACTF("Shuffling queue..."); + shuffle_ptrs((void**)nl, nl_cnt); + + } + + for (i = 0; i < nl_cnt; i++) { + + struct stat st; + + u8* fn = alloc_printf("%s/%s", in_dir, nl[i]->d_name); + u8* dfn = alloc_printf("%s/.state/deterministic_done/%s", in_dir, nl[i]->d_name); + + u8 passed_det = 0; + + free(nl[i]); /* not tracked */ + + if (lstat(fn, &st) || access(fn, R_OK)) + PFATAL("Unable to access '%s'", fn); + + /* This also takes care of . and .. */ + + if (!S_ISREG(st.st_mode) || !st.st_size || strstr(fn, "/README.testcases")) { + + ck_free(fn); + ck_free(dfn); + continue; + + } + + if (st.st_size > MAX_FILE) + FATAL("Test case '%s' is too big (%s, limit is %s)", fn, + DMS(st.st_size), DMS(MAX_FILE)); + + /* Check for metadata that indicates that deterministic fuzzing + is complete for this entry. We don't want to repeat deterministic + fuzzing when resuming aborted scans, because it would be pointless + and probably very time-consuming. */ + + if (!access(dfn, F_OK)) passed_det = 1; + ck_free(dfn); + + add_to_queue(fn, st.st_size, passed_det); + + } + + free(nl); /* not tracked */ + + if (!queued_paths) { + + SAYF("\n" cLRD "[-] " cRST + "Looks like there are no valid test cases in the input directory! The fuzzer\n" + " needs one or more test case to start with - ideally, a small file under\n" + " 1 kB or so. The cases must be stored as regular files directly in the\n" + " input directory.\n"); + + FATAL("No usable test cases in '%s'", in_dir); + + } + + last_path_time = 0; + queued_at_start = queued_paths; + +} + + +/* Helper function for load_extras. */ + +static int compare_extras_len(const void* p1, const void* p2) { + struct extra_data *e1 = (struct extra_data*)p1, + *e2 = (struct extra_data*)p2; + + return e1->len - e2->len; +} + +static int compare_extras_use_d(const void* p1, const void* p2) { + struct extra_data *e1 = (struct extra_data*)p1, + *e2 = (struct extra_data*)p2; + + return e2->hit_cnt - e1->hit_cnt; +} + + +/* Read extras from a file, sort by size. */ + +static void load_extras_file(u8* fname, u32* min_len, u32* max_len, + u32 dict_level) { + + FILE* f; + u8 buf[MAX_LINE]; + u8 *lptr; + u32 cur_line = 0; + + f = fopen(fname, "r"); + + if (!f) PFATAL("Unable to open '%s'", fname); + + while ((lptr = fgets(buf, MAX_LINE, f))) { + + u8 *rptr, *wptr; + u32 klen = 0; + + cur_line++; + + /* Trim on left and right. */ + + while (isspace(*lptr)) lptr++; + + rptr = lptr + strlen(lptr) - 1; + while (rptr >= lptr && isspace(*rptr)) rptr--; + rptr++; + *rptr = 0; + + /* Skip empty lines and comments. */ + + if (!*lptr || *lptr == '#') continue; + + /* All other lines must end with '"', which we can consume. */ + + rptr--; + + if (rptr < lptr || *rptr != '"') + FATAL("Malformed name=\"value\" pair in line %u.", cur_line); + + *rptr = 0; + + /* Skip alphanumerics and dashes (label). */ + + while (isalnum(*lptr) || *lptr == '_') lptr++; + + /* If @number follows, parse that. */ + + if (*lptr == '@') { + + lptr++; + if (atoi(lptr) > dict_level) continue; + while (isdigit(*lptr)) lptr++; + + } + + /* Skip whitespace and = signs. */ + + while (isspace(*lptr) || *lptr == '=') lptr++; + + /* Consume opening '"'. */ + + if (*lptr != '"') + FATAL("Malformed name=\"keyword\" pair in line %u.", cur_line); + + lptr++; + + if (!*lptr) FATAL("Empty keyword in line %u.", cur_line); + + /* Okay, let's allocate memory and copy data between "...", handling + \xNN escaping, \\, and \". */ + + extras = ck_realloc_block(extras, (extras_cnt + 1) * + sizeof(struct extra_data)); + + wptr = extras[extras_cnt].data = ck_alloc(rptr - lptr); + + while (*lptr) { + + char* hexdigits = "0123456789abcdef"; + + switch (*lptr) { + + case 1 ... 31: + case 128 ... 255: + FATAL("Non-printable characters in line %u.", cur_line); + + case '\\': + + lptr++; + + if (*lptr == '\\' || *lptr == '"') { + *(wptr++) = *(lptr++); + klen++; + break; + } + + if (*lptr != 'x' || !isxdigit(lptr[1]) || !isxdigit(lptr[2])) + FATAL("Invalid escaping (not \\xNN) in line %u.", cur_line); + + *(wptr++) = + ((strchr(hexdigits, tolower(lptr[1])) - hexdigits) << 4) | + (strchr(hexdigits, tolower(lptr[2])) - hexdigits); + + lptr += 3; + klen++; + + break; + + default: + + *(wptr++) = *(lptr++); + klen++; + + } + + } + + extras[extras_cnt].len = klen; + + if (extras[extras_cnt].len > MAX_DICT_FILE) + FATAL("Keyword too big in line %u (%s, limit is %s)", cur_line, + DMS(klen), DMS(MAX_DICT_FILE)); + + if (*min_len > klen) *min_len = klen; + if (*max_len < klen) *max_len = klen; + + extras_cnt++; + + } + + fclose(f); + +} + + +/* Read extras from the extras directory and sort them by size. */ +//加载额外的测试用例，处理从外部源加载额外的测试用例。 +static void load_extras(u8* dir) { + + DIR* d; + struct dirent* de; + u32 min_len = MAX_DICT_FILE, max_len = 0, dict_level = 0; + u8* x; + + /* If the name ends with @, extract level and continue. */ + + if ((x = strchr(dir, '@'))) { + + *x = 0; + dict_level = atoi(x + 1); + + } + + ACTF("Loading extra dictionary from '%s' (level %u)...", dir, dict_level); + + d = opendir(dir); + + if (!d) { + + if (errno == ENOTDIR) { + load_extras_file(dir, &min_len, &max_len, dict_level); + goto check_and_sort; + } + + PFATAL("Unable to open '%s'", dir); + + } + + if (x) FATAL("Dictionary levels not supported for directories."); + + while ((de = readdir(d))) { + + struct stat st; + u8* fn = alloc_printf("%s/%s", dir, de->d_name); + s32 fd; + + if (lstat(fn, &st) || access(fn, R_OK)) + PFATAL("Unable to access '%s'", fn); + + /* This also takes care of . and .. */ + if (!S_ISREG(st.st_mode) || !st.st_size) { + + ck_free(fn); + continue; + + } + + if (st.st_size > MAX_DICT_FILE) + FATAL("Extra '%s' is too big (%s, limit is %s)", fn, + DMS(st.st_size), DMS(MAX_DICT_FILE)); + + if (min_len > st.st_size) min_len = st.st_size; + if (max_len < st.st_size) max_len = st.st_size; + + extras = ck_realloc_block(extras, (extras_cnt + 1) * + sizeof(struct extra_data)); + + extras[extras_cnt].data = ck_alloc(st.st_size); + extras[extras_cnt].len = st.st_size; + + fd = open(fn, O_RDONLY); + + if (fd < 0) PFATAL("Unable to open '%s'", fn); + + ck_read(fd, extras[extras_cnt].data, st.st_size, fn); + + close(fd); + ck_free(fn); + + extras_cnt++; + + } + + closedir(d); + +check_and_sort: + + if (!extras_cnt) FATAL("No usable files in '%s'", dir); + + qsort(extras, extras_cnt, sizeof(struct extra_data), compare_extras_len); + + OKF("Loaded %u extra tokens, size range %s to %s.", extras_cnt, + DMS(min_len), DMS(max_len)); + + if (max_len > 32) + WARNF("Some tokens are relatively large (%s) - consider trimming.", + DMS(max_len)); + + if (extras_cnt > MAX_DET_EXTRAS) + WARNF("More than %u tokens - will use them probabilistically.", + MAX_DET_EXTRAS); + +} + + + + +/* Helper function for maybe_add_auto() */ + +static inline u8 memcmp_nocase(u8* m1, u8* m2, u32 len) { + + while (len--) if (tolower(*(m1++)) ^ tolower(*(m2++))) return 1; + return 0; + +} + + +/* Maybe add automatic extra. */ + +static void maybe_add_auto(u8* mem, u32 len) { + + u32 i; + + /* Allow users to specify that they don't want auto dictionaries. */ + + if (!MAX_AUTO_EXTRAS || !USE_AUTO_EXTRAS) return; + + /* Skip runs of identical bytes. */ + + for (i = 1; i < len; i++) + if (mem[0] ^ mem[i]) break; + + if (i == len) return; + + /* Reject builtin interesting values. */ + + if (len == 2) { + + i = sizeof(interesting_16) >> 1; + + while (i--) + if (*((u16*)mem) == interesting_16[i] || + *((u16*)mem) == SWAP16(interesting_16[i])) return; + + } + + if (len == 4) { + + i = sizeof(interesting_32) >> 2; + + while (i--) + if (*((u32*)mem) == interesting_32[i] || + *((u32*)mem) == SWAP32(interesting_32[i])) return; + + } + + /* Reject anything that matches existing extras. Do a case-insensitive + match. We optimize by exploiting the fact that extras[] are sorted + by size. */ + + for (i = 0; i < extras_cnt; i++) + if (extras[i].len >= len) break; + + for (; i < extras_cnt && extras[i].len == len; i++) + if (!memcmp_nocase(extras[i].data, mem, len)) return; + + /* Last but not least, check a_extras[] for matches. There are no + guarantees of a particular sort order. */ + + auto_changed = 1; + + for (i = 0; i < a_extras_cnt; i++) { + + if (a_extras[i].len == len && !memcmp_nocase(a_extras[i].data, mem, len)) { + + a_extras[i].hit_cnt++; + goto sort_a_extras; + + } + + } + + /* At this point, looks like we're dealing with a new entry. So, let's + append it if we have room. Otherwise, let's randomly evict some other + entry from the bottom half of the list. */ + + if (a_extras_cnt < MAX_AUTO_EXTRAS) { + + a_extras = ck_realloc_block(a_extras, (a_extras_cnt + 1) * + sizeof(struct extra_data)); + + a_extras[a_extras_cnt].data = ck_memdup(mem, len); + a_extras[a_extras_cnt].len = len; + a_extras_cnt++; + + } else { + + i = MAX_AUTO_EXTRAS / 2 + + UR((MAX_AUTO_EXTRAS + 1) / 2); + + ck_free(a_extras[i].data); + + a_extras[i].data = ck_memdup(mem, len); + a_extras[i].len = len; + a_extras[i].hit_cnt = 0; + + } + +sort_a_extras: + + /* First, sort all auto extras by use count, descending order. */ + + qsort(a_extras, a_extras_cnt, sizeof(struct extra_data), + compare_extras_use_d); + + /* Then, sort the top USE_AUTO_EXTRAS entries by size. */ + + qsort(a_extras, MIN(USE_AUTO_EXTRAS, a_extras_cnt), + sizeof(struct extra_data), compare_extras_len); + +} + + +/* Save automatically generated extras. */ +//保存额外的测试用例，保存在模糊测试过程中自动生成的测试用例。 +static void save_auto(void) { + + u32 i; + + if (!auto_changed) return; + auto_changed = 0; + + for (i = 0; i < MIN(USE_AUTO_EXTRAS, a_extras_cnt); i++) { + + u8* fn = alloc_printf("%s/queue/.state/auto_extras/auto_%06u", out_dir, i); + s32 fd; + + fd = open(fn, O_WRONLY | O_CREAT | O_TRUNC, 0600); + + if (fd < 0) PFATAL("Unable to create '%s'", fn); + + ck_write(fd, a_extras[i].data, a_extras[i].len, fn); + + close(fd); + ck_free(fn); + + } + +} + + +/* Load automatically generated extras. */ + +static void load_auto(void) { + + u32 i; + + for (i = 0; i < USE_AUTO_EXTRAS; i++) { + + u8 tmp[MAX_AUTO_EXTRA + 1]; + u8* fn = alloc_printf("%s/.state/auto_extras/auto_%06u", in_dir, i); + s32 fd, len; + + fd = open(fn, O_RDONLY, 0600); + + if (fd < 0) { + + if (errno != ENOENT) PFATAL("Unable to open '%s'", fn); + ck_free(fn); + break; + + } + + /* We read one byte more to cheaply detect tokens that are too + long (and skip them). */ + + len = read(fd, tmp, MAX_AUTO_EXTRA + 1); + + if (len < 0) PFATAL("Unable to read from '%s'", fn); + + if (len >= MIN_AUTO_EXTRA && len <= MAX_AUTO_EXTRA) + maybe_add_auto(tmp, len); + + close(fd); + ck_free(fn); + + } + + if (i) OKF("Loaded %u auto-discovered dictionary tokens.", i); + else OKF("No auto-generated dictionary tokens to reuse."); + +} + + +/* Destroy extras. */ + +static void destroy_extras(void) { + + u32 i; + + for (i = 0; i < extras_cnt; i++) + ck_free(extras[i].data); + + ck_free(extras); + + for (i = 0; i < a_extras_cnt; i++) + ck_free(a_extras[i].data); + + ck_free(a_extras); + +} + + +/* Spin up fork server (instrumented mode only). The idea is explained here: + + http://lcamtuf.blogspot.com/2014/10/fuzzing-binaries-without-execve.html + + In essence, the instrumentation allows us to skip execve(), and just keep + cloning a stopped child. So, we just execute once, and then send commands + through a pipe. The other part of this logic is in afl-as.h. */ +//初始化fork服务器的函数。在AFL中，fork服务器是一种优化技术，它允许AFL避免频繁地执行execve()来启动目标程序。相反，它通过克隆一个已经执行的目标程序进程来实现。 +EXP_ST void init_forkserver(char** argv) { + + static struct itimerval it; + int st_pipe[2], ctl_pipe[2]; + int status; + s32 rlen; + + ACTF("Spinning up the fork server..."); + + if (pipe(st_pipe) || pipe(ctl_pipe)) PFATAL("pipe() failed"); + + forksrv_pid = fork(); + + if (forksrv_pid < 0) PFATAL("fork() failed"); + + if (!forksrv_pid) { + + struct rlimit r; + + /* Umpf. On OpenBSD, the default fd limit for root users is set to + soft 128. Let's try to fix that... */ + + if (!getrlimit(RLIMIT_NOFILE, &r) && r.rlim_cur < FORKSRV_FD + 2) { + + r.rlim_cur = FORKSRV_FD + 2; + setrlimit(RLIMIT_NOFILE, &r); /* Ignore errors */ + + } + + if (mem_limit) { + + r.rlim_max = r.rlim_cur = ((rlim_t)mem_limit) << 20; + +#ifdef RLIMIT_AS + + setrlimit(RLIMIT_AS, &r); /* Ignore errors */ + +#else + + /* This takes care of OpenBSD, which doesn't have RLIMIT_AS, but + according to reliable sources, RLIMIT_DATA covers anonymous + maps - so we should be getting good protection against OOM bugs. */ + + setrlimit(RLIMIT_DATA, &r); /* Ignore errors */ + +#endif /* ^RLIMIT_AS */ + + + } + + /* Dumping cores is slow and can lead to anomalies if SIGKILL is delivered + before the dump is complete. */ + + r.rlim_max = r.rlim_cur = 0; + + setrlimit(RLIMIT_CORE, &r); /* Ignore errors */ + + /* Isolate the process and configure standard descriptors. If out_file is + specified, stdin is /dev/null; otherwise, out_fd is cloned instead. */ + + setsid(); + + dup2(dev_null_fd, 1); + dup2(dev_null_fd, 2); + + if (out_file) { + + dup2(dev_null_fd, 0); + + } else { + + dup2(out_fd, 0); + close(out_fd); + + } + + /* Set up control and status pipes, close the unneeded original fds. */ + + if (dup2(ctl_pipe[0], FORKSRV_FD) < 0) PFATAL("dup2() failed"); + if (dup2(st_pipe[1], FORKSRV_FD + 1) < 0) PFATAL("dup2() failed"); + + close(ctl_pipe[0]); + close(ctl_pipe[1]); + close(st_pipe[0]); + close(st_pipe[1]); + + close(out_dir_fd); + close(dev_null_fd); + close(dev_urandom_fd); + close(fileno(plot_file)); + + /* This should improve performance a bit, since it stops the linker from + doing extra work post-fork(). */ + + if (!getenv("LD_BIND_LAZY")) setenv("LD_BIND_NOW", "1", 0); + + /* Set sane defaults for ASAN if nothing else specified. */ + + setenv("ASAN_OPTIONS", "abort_on_error=1:" + "detect_leaks=0:" + "symbolize=0:" + "allocator_may_return_null=1", 0); + + /* MSAN is tricky, because it doesn't support abort_on_error=1 at this + point. So, we do this in a very hacky way. */ + + setenv("MSAN_OPTIONS", "exit_code=" STRINGIFY(MSAN_ERROR) ":" + "symbolize=0:" + "abort_on_error=1:" + "allocator_may_return_null=1:" + "msan_track_origins=0", 0); + + execv(target_path, argv); + + /* Use a distinctive bitmap signature to tell the parent about execv() + falling through. */ + + *(u32*)trace_bits = EXEC_FAIL_SIG; + exit(0); + + } + + /* Close the unneeded endpoints. */ + + close(ctl_pipe[0]); + close(st_pipe[1]); + + fsrv_ctl_fd = ctl_pipe[1]; + fsrv_st_fd = st_pipe[0]; + + /* Wait for the fork server to come up, but don't wait too long. */ + + it.it_value.tv_sec = ((exec_tmout * FORK_WAIT_MULT) / 1000); + it.it_value.tv_usec = ((exec_tmout * FORK_WAIT_MULT) % 1000) * 1000; + + setitimer(ITIMER_REAL, &it, NULL); + + rlen = read(fsrv_st_fd, &status, 4); + + it.it_value.tv_sec = 0; + it.it_value.tv_usec = 0; + + setitimer(ITIMER_REAL, &it, NULL); + + /* If we have a four-byte "hello" message from the server, we're all set. + Otherwise, try to figure out what went wrong. */ + + if (rlen == 4) { + OKF("All right - fork server is up."); + return; + } + + if (child_timed_out) + FATAL("Timeout while initializing fork server (adjusting -t may help)"); + + if (waitpid(forksrv_pid, &status, 0) <= 0) + PFATAL("waitpid() failed"); + + if (WIFSIGNALED(status)) { + + if (mem_limit && mem_limit < 500 && uses_asan) { + + SAYF("\n" cLRD "[-] " cRST + "Whoops, the target binary crashed suddenly, before receiving any input\n" + " from the fuzzer! Since it seems to be built with ASAN and you have a\n" + " restrictive memory limit configured, this is expected; please read\n" + " %s/notes_for_asan.txt for help.\n", doc_path); + + } else if (!mem_limit) { + + SAYF("\n" cLRD "[-] " cRST + "Whoops, the target binary crashed suddenly, before receiving any input\n" + " from the fuzzer! There are several probable explanations:\n\n" + + " - The binary is just buggy and explodes entirely on its own. If so, you\n" + " need to fix the underlying problem or find a better replacement.\n\n" + +#ifdef __APPLE__ + + " - On MacOS X, the semantics of fork() syscalls are non-standard and may\n" + " break afl-fuzz performance optimizations when running platform-specific\n" + " targets. To fix this, set AFL_NO_FORKSRV=1 in the environment.\n\n" + +#endif /* __APPLE__ */ + + " - Less likely, there is a horrible bug in the fuzzer. If other options\n" + " fail, poke for troubleshooting tips.\n"); + + } else { + + SAYF("\n" cLRD "[-] " cRST + "Whoops, the target binary crashed suddenly, before receiving any input\n" + " from the fuzzer! There are several probable explanations:\n\n" + + " - The current memory limit (%s) is too restrictive, causing the\n" + " target to hit an OOM condition in the dynamic linker. Try bumping up\n" + " the limit with the -m setting in the command line. A simple way confirm\n" + " this diagnosis would be:\n\n" + +#ifdef RLIMIT_AS + " ( ulimit -Sv $[%llu << 10]; /path/to/fuzzed_app )\n\n" +#else + " ( ulimit -Sd $[%llu << 10]; /path/to/fuzzed_app )\n\n" +#endif /* ^RLIMIT_AS */ + + " Tip: you can use http://jwilk.net/software/recidivm to quickly\n" + " estimate the required amount of virtual memory for the binary.\n\n" + + " - The binary is just buggy and explodes entirely on its own. If so, you\n" + " need to fix the underlying problem or find a better replacement.\n\n" + +#ifdef __APPLE__ + + " - On MacOS X, the semantics of fork() syscalls are non-standard and may\n" + " break afl-fuzz performance optimizations when running platform-specific\n" + " targets. To fix this, set AFL_NO_FORKSRV=1 in the environment.\n\n" + +#endif /* __APPLE__ */ + + " - Less likely, there is a horrible bug in the fuzzer. If other options\n" + " fail, poke for troubleshooting tips.\n", + DMS(mem_limit << 20), mem_limit - 1); + + } + + FATAL("Fork server crashed with signal %d", WTERMSIG(status)); + + } + + if (*(u32*)trace_bits == EXEC_FAIL_SIG) + FATAL("Unable to execute target application ('%s')", argv[0]); + + if (mem_limit && mem_limit < 500 && uses_asan) { + + SAYF("\n" cLRD "[-] " cRST + "Hmm, looks like the target binary terminated before we could complete a\n" + " handshake with the injected code. Since it seems to be built with ASAN and\n" + " you have a restrictive memory limit configured, this is expected; please\n" + " read %s/notes_for_asan.txt for help.\n", doc_path); + + } else if (!mem_limit) { + + SAYF("\n" cLRD "[-] " cRST + "Hmm, looks like the target binary terminated before we could complete a\n" + " handshake with the injected code. Perhaps there is a horrible bug in the\n" + " fuzzer. Poke for troubleshooting tips.\n"); + + } else { + + SAYF("\n" cLRD "[-] " cRST + "Hmm, looks like the target binary terminated before we could complete a\n" + " handshake with the injected code. There are %s probable explanations:\n\n" + + "%s" + " - The current memory limit (%s) is too restrictive, causing an OOM\n" + " fault in the dynamic linker. This can be fixed with the -m option. A\n" + " simple way to confirm the diagnosis may be:\n\n" + +#ifdef RLIMIT_AS + " ( ulimit -Sv $[%llu << 10]; /path/to/fuzzed_app )\n\n" +#else + " ( ulimit -Sd $[%llu << 10]; /path/to/fuzzed_app )\n\n" +#endif /* ^RLIMIT_AS */ + + " Tip: you can use http://jwilk.net/software/recidivm to quickly\n" + " estimate the required amount of virtual memory for the binary.\n\n" + + " - Less likely, there is a horrible bug in the fuzzer. If other options\n" + " fail, poke for troubleshooting tips.\n", + getenv(DEFER_ENV_VAR) ? "three" : "two", + getenv(DEFER_ENV_VAR) ? + " - You are using deferred forkserver, but __AFL_INIT() is never\n" + " reached before the program terminates.\n\n" : "", + DMS(mem_limit << 20), mem_limit - 1); + + } + + FATAL("Fork server handshake failed"); + +} + + +/* Execute target application, monitoring for timeouts. Return status + information. The called program will update trace_bits[]. */ +//运行目标程序并监控超时。它负责启动目标程序，等待其执行完成，并捕获任何超时或崩溃。 +static u8 run_target(char** argv, u32 timeout) { + + static struct itimerval it; + static u32 prev_timed_out = 0; + static u64 exec_ms = 0; + + int status = 0; + u32 tb4; + + child_timed_out = 0; + + /* After this memset, trace_bits[] are effectively volatile, so we + must prevent any earlier operations from venturing into that + territory. */ + + memset(trace_bits, 0, MAP_SIZE); + MEM_BARRIER(); + + /* If we're running in "dumb" mode, we can't rely on the fork server + logic compiled into the target program, so we will just keep calling + execve(). There is a bit of code duplication between here and + init_forkserver(), but c'est la vie. */ + + if (dumb_mode == 1 || no_forkserver) { + + child_pid = fork(); + + if (child_pid < 0) PFATAL("fork() failed"); + + if (!child_pid) { + + struct rlimit r; + + if (mem_limit) { + + r.rlim_max = r.rlim_cur = ((rlim_t)mem_limit) << 20; + +#ifdef RLIMIT_AS + + setrlimit(RLIMIT_AS, &r); /* Ignore errors */ + +#else + + setrlimit(RLIMIT_DATA, &r); /* Ignore errors */ + +#endif /* ^RLIMIT_AS */ + + } + + r.rlim_max = r.rlim_cur = 0; + + setrlimit(RLIMIT_CORE, &r); /* Ignore errors */ + + /* Isolate the process and configure standard descriptors. If out_file is + specified, stdin is /dev/null; otherwise, out_fd is cloned instead. */ + + setsid(); + + dup2(dev_null_fd, 1); + dup2(dev_null_fd, 2); + + if (out_file) { + + dup2(dev_null_fd, 0); + + } else { + + dup2(out_fd, 0); + close(out_fd); + + } + + /* On Linux, would be faster to use O_CLOEXEC. Maybe TODO. */ + + close(dev_null_fd); + close(out_dir_fd); + close(dev_urandom_fd); + close(fileno(plot_file)); + + /* Set sane defaults for ASAN if nothing else specified. */ + + setenv("ASAN_OPTIONS", "abort_on_error=1:" + "detect_leaks=0:" + "symbolize=0:" + "allocator_may_return_null=1", 0); + + setenv("MSAN_OPTIONS", "exit_code=" STRINGIFY(MSAN_ERROR) ":" + "symbolize=0:" + "msan_track_origins=0", 0); + + execv(target_path, argv); + + /* Use a distinctive bitmap value to tell the parent about execv() + falling through. */ + + *(u32*)trace_bits = EXEC_FAIL_SIG; + exit(0); + + } + + } else { + + s32 res; + + /* In non-dumb mode, we have the fork server up and running, so simply + tell it to have at it, and then read back PID. */ + + if ((res = write(fsrv_ctl_fd, &prev_timed_out, 4)) != 4) { + + if (stop_soon) return 0; + RPFATAL(res, "Unable to request new process from fork server (OOM?)"); + + } + + if ((res = read(fsrv_st_fd, &child_pid, 4)) != 4) { + + if (stop_soon) return 0; + RPFATAL(res, "Unable to request new process from fork server (OOM?)"); + + } + + if (child_pid <= 0) FATAL("Fork server is misbehaving (OOM?)"); + + } + + /* Configure timeout, as requested by user, then wait for child to terminate. */ + + it.it_value.tv_sec = (timeout / 1000); + it.it_value.tv_usec = (timeout % 1000) * 1000; + + setitimer(ITIMER_REAL, &it, NULL); + + /* The SIGALRM handler simply kills the child_pid and sets child_timed_out. */ + + if (dumb_mode == 1 || no_forkserver) { + + if (waitpid(child_pid, &status, 0) <= 0) PFATAL("waitpid() failed"); + + } else { + + s32 res; + + if ((res = read(fsrv_st_fd, &status, 4)) != 4) { + + if (stop_soon) return 0; + RPFATAL(res, "Unable to communicate with fork server (OOM?)"); + + } + + } + + if (!WIFSTOPPED(status)) child_pid = 0; + + getitimer(ITIMER_REAL, &it); + exec_ms = (u64) timeout - (it.it_value.tv_sec * 1000 + + it.it_value.tv_usec / 1000); + + it.it_value.tv_sec = 0; + it.it_value.tv_usec = 0; + + setitimer(ITIMER_REAL, &it, NULL); + + total_execs++; + + /* Any subsequent operations on trace_bits must not be moved by the + compiler below this point. Past this location, trace_bits[] behave + very normally and do not have to be treated as volatile. */ + + MEM_BARRIER(); + + tb4 = *(u32*)trace_bits; + +#ifdef WORD_SIZE_64 + classify_counts((u64*)trace_bits); +#else + classify_counts((u32*)trace_bits); +#endif /* ^WORD_SIZE_64 */ + + prev_timed_out = child_timed_out; + + /* Report outcome to caller. */ + + if (WIFSIGNALED(status) && !stop_soon) { + + kill_signal = WTERMSIG(status); + + if (child_timed_out && kill_signal == SIGKILL) return FAULT_TMOUT; + + return FAULT_CRASH; + + } + + /* A somewhat nasty hack for MSAN, which doesn't support abort_on_error and + must use a special exit code. */ + + if (uses_asan && WEXITSTATUS(status) == MSAN_ERROR) { + kill_signal = 0; + return FAULT_CRASH; + } + + if ((dumb_mode == 1 || no_forkserver) && tb4 == EXEC_FAIL_SIG) + return FAULT_ERROR; + + /* It makes sense to account for the slowest units only if the testcase was run + under the user defined timeout. */ + if (!(timeout > exec_tmout) && (slowest_exec_ms < exec_ms)) { + slowest_exec_ms = exec_ms; + } + + return FAULT_NONE; + +} + + +/* Write modified data to file for testing. If out_file is set, the old file + is unlinked and a new one is created. Otherwise, out_fd is rewound and + truncated. */ +//将修改后的数据写入测试用例文件。如果指定了输出文件，则会创建一个新文件；否则，会重置并截断现有的输出文件描述符。 +static void write_to_testcase(void* mem, u32 len) { + + s32 fd = out_fd; + + if (out_file) { + + unlink(out_file); /* Ignore errors. */ + + fd = open(out_file, O_WRONLY | O_CREAT | O_EXCL, 0600); + + if (fd < 0) PFATAL("Unable to create '%s'", out_file); + + } else lseek(fd, 0, SEEK_SET); + + ck_write(fd, mem, len, out_file); + + if (!out_file) { + + if (ftruncate(fd, len)) PFATAL("ftruncate() failed"); + lseek(fd, 0, SEEK_SET); + + } else close(fd); + +} + + +/* The same, but with an adjustable gap. Used for trimming. */ + +static void write_with_gap(void* mem, u32 len, u32 skip_at, u32 skip_len) { + + s32 fd = out_fd; + u32 tail_len = len - skip_at - skip_len; + + if (out_file) { + + unlink(out_file); /* Ignore errors. */ + + fd = open(out_file, O_WRONLY | O_CREAT | O_EXCL, 0600); + + if (fd < 0) PFATAL("Unable to create '%s'", out_file); + + } else lseek(fd, 0, SEEK_SET); + + if (skip_at) ck_write(fd, mem, skip_at, out_file); + + if (tail_len) ck_write(fd, mem + skip_at + skip_len, tail_len, out_file); + + if (!out_file) { + + if (ftruncate(fd, len - skip_len)) PFATAL("ftruncate() failed"); + lseek(fd, 0, SEEK_SET); + + } else close(fd); + +} + +//显示模糊测试的统计信息，如执行速度、发现的路径数量、唯一崩溃等。 +static void show_stats(void); + +/* Calibrate a new test case. This is done when processing the input directory + to warn about flaky or otherwise problematic test cases early on; and when + new paths are discovered to detect variable behavior and so on. */ +//校准测试用例的函数。它执行目标程序多次，以确定测试用例的执行时间和覆盖率，这有助于确定测试用例的优先级。 +static u8 calibrate_case(char** argv, struct queue_entry* q, u8* use_mem, + u32 handicap, u8 from_queue) { + + static u8 first_trace[MAP_SIZE]; + + u8 fault = 0, new_bits = 0, var_detected = 0, hnb = 0, + first_run = (q->exec_cksum == 0); + + u64 start_us, stop_us; + + s32 old_sc = stage_cur, old_sm = stage_max; + u32 use_tmout = exec_tmout; + u8* old_sn = stage_name; + + /* Be a bit more generous about timeouts when resuming sessions, or when + trying to calibrate already-added finds. This helps avoid trouble due + to intermittent latency. */ + + if (!from_queue || resuming_fuzz) + use_tmout = MAX(exec_tmout + CAL_TMOUT_ADD, + exec_tmout * CAL_TMOUT_PERC / 100); + + q->cal_failed++; + + stage_name = "calibration"; + stage_max = fast_cal ? 3 : CAL_CYCLES; + + /* Make sure the forkserver is up before we do anything, and let's not + count its spin-up time toward binary calibration. */ + + if (dumb_mode != 1 && !no_forkserver && !forksrv_pid) + init_forkserver(argv); + + if (q->exec_cksum) { + + memcpy(first_trace, trace_bits, MAP_SIZE); + hnb = has_new_bits(virgin_bits); + if (hnb > new_bits) new_bits = hnb; + + } + + start_us = get_cur_time_us(); + + for (stage_cur = 0; stage_cur < stage_max; stage_cur++) { + + u32 cksum; + + if (!first_run && !(stage_cur % stats_update_freq)) show_stats(); + + write_to_testcase(use_mem, q->len); + + fault = run_target(argv, use_tmout); + + /* stop_soon is set by the handler for Ctrl+C. When it's pressed, + we want to bail out quickly. */ + + if (stop_soon || fault != crash_mode) goto abort_calibration; + + if (!dumb_mode && !stage_cur && !count_bytes(trace_bits)) { + fault = FAULT_NOINST; + goto abort_calibration; + } + + cksum = hash32(trace_bits, MAP_SIZE, HASH_CONST); + + if (q->exec_cksum != cksum) { + + hnb = has_new_bits(virgin_bits); + if (hnb > new_bits) new_bits = hnb; + + if (q->exec_cksum) { + + u32 i; + + for (i = 0; i < MAP_SIZE; i++) { + + if (!var_bytes[i] && first_trace[i] != trace_bits[i]) { + + var_bytes[i] = 1; + stage_max = CAL_CYCLES_LONG; + + } + + } + + var_detected = 1; + + } else { + + q->exec_cksum = cksum; + memcpy(first_trace, trace_bits, MAP_SIZE); + + } + + } + + } + + stop_us = get_cur_time_us(); + + total_cal_us += stop_us - start_us; + total_cal_cycles += stage_max; + + /* OK, let's collect some stats about the performance of this test case. + This is used for fuzzing air time calculations in calculate_score(). */ + + q->exec_us = (stop_us - start_us) / stage_max; + q->bitmap_size = count_bytes(trace_bits); + q->handicap = handicap; + q->cal_failed = 0; + + total_bitmap_size += q->bitmap_size; + total_bitmap_entries++; + + update_bitmap_score(q); + + /* If this case didn't result in new output from the instrumentation, tell + parent. This is a non-critical problem, but something to warn the user + about. */ + + if (!dumb_mode && first_run && !fault && !new_bits) fault = FAULT_NOBITS; + +abort_calibration: + + if (new_bits == 2 && !q->has_new_cov) { + q->has_new_cov = 1; + queued_with_cov++; + } + + /* Mark variable paths. */ + + if (var_detected) { + + var_byte_count = count_bytes(var_bytes); + + if (!q->var_behavior) { + mark_as_variable(q); + queued_variable++; + } + + } + + stage_name = old_sn; + stage_cur = old_sc; + stage_max = old_sm; + + if (!first_run) show_stats(); + + return fault; + +} + + +/* Examine map coverage. Called once, for first test case. */ +//检查位图覆盖率。如果位图的覆盖率不足，这个函数会提醒用户可能需要重新编译目标程序以获得更好的覆盖率。 +static void check_map_coverage(void) { + + u32 i; + + if (count_bytes(trace_bits) < 100) return; + + for (i = (1 << (MAP_SIZE_POW2 - 1)); i < MAP_SIZE; i++) + if (trace_bits[i]) return; + + WARNF("Recompile binary with newer version of afl to improve coverage!"); + +} + + +/* Perform dry run of all test cases to confirm that the app is working as + expected. This is done only for the initial inputs, and only once. */ +//执行干运行。在正式开始模糊测试之前，这个函数用于验证目标程序的行为，确保它能够正确处理初始的测试用例集。 +static void perform_dry_run(char** argv) { + + struct queue_entry* q = queue; + u32 cal_failures = 0; + u8* skip_crashes = getenv("AFL_SKIP_CRASHES"); + + while (q) { + + u8* use_mem; + u8 res; + s32 fd; + + u8* fn = strrchr(q->fname, '/') + 1; + + ACTF("Attempting dry run with '%s'...", fn); + + fd = open(q->fname, O_RDONLY); + if (fd < 0) PFATAL("Unable to open '%s'", q->fname); + + use_mem = ck_alloc_nozero(q->len); + + if (read(fd, use_mem, q->len) != q->len) + FATAL("Short read from '%s'", q->fname); + + close(fd); + + res = calibrate_case(argv, q, use_mem, 0, 1); + ck_free(use_mem); + + if (stop_soon) return; + + if (res == crash_mode || res == FAULT_NOBITS) + SAYF(cGRA " len = %u, map size = %u, exec speed = %llu us\n" cRST, + q->len, q->bitmap_size, q->exec_us); + + switch (res) { + + case FAULT_NONE: + + if (q == queue) check_map_coverage(); + + if (crash_mode) FATAL("Test case '%s' does *NOT* crash", fn); + + break; + + case FAULT_TMOUT: + + if (timeout_given) { + + /* The -t nn+ syntax in the command line sets timeout_given to '2' and + instructs afl-fuzz to tolerate but skip queue entries that time + out. */ + + if (timeout_given > 1) { + WARNF("Test case results in a timeout (skipping)"); + q->cal_failed = CAL_CHANCES; + cal_failures++; + break; + } + + SAYF("\n" cLRD "[-] " cRST + "The program took more than %u ms to process one of the initial test cases.\n" + " Usually, the right thing to do is to relax the -t option - or to delete it\n" + " altogether and allow the fuzzer to auto-calibrate. That said, if you know\n" + " what you are doing and want to simply skip the unruly test cases, append\n" + " '+' at the end of the value passed to -t ('-t %u+').\n", exec_tmout, + exec_tmout); + + FATAL("Test case '%s' results in a timeout", fn); + + } else { + + SAYF("\n" cLRD "[-] " cRST + "The program took more than %u ms to process one of the initial test cases.\n" + " This is bad news; raising the limit with the -t option is possible, but\n" + " will probably make the fuzzing process extremely slow.\n\n" + + " If this test case is just a fluke, the other option is to just avoid it\n" + " altogether, and find one that is less of a CPU hog.\n", exec_tmout); + + FATAL("Test case '%s' results in a timeout", fn); + + } + + case FAULT_CRASH: + + if (crash_mode) break; + + if (skip_crashes) { + WARNF("Test case results in a crash (skipping)"); + q->cal_failed = CAL_CHANCES; + cal_failures++; + break; + } + + if (mem_limit) { + + SAYF("\n" cLRD "[-] " cRST + "Oops, the program crashed with one of the test cases provided. There are\n" + " several possible explanations:\n\n" + + " - The test case causes known crashes under normal working conditions. If\n" + " so, please remove it. The fuzzer should be seeded with interesting\n" + " inputs - but not ones that cause an outright crash.\n\n" + + " - The current memory limit (%s) is too low for this program, causing\n" + " it to die due to OOM when parsing valid files. To fix this, try\n" + " bumping it up with the -m setting in the command line. If in doubt,\n" + " try something along the lines of:\n\n" + +#ifdef RLIMIT_AS + " ( ulimit -Sv $[%llu << 10]; /path/to/binary [...] for troubleshooting tips.\n", + DMS(mem_limit << 20), mem_limit - 1, doc_path); + + } else { + + SAYF("\n" cLRD "[-] " cRST + "Oops, the program crashed with one of the test cases provided. There are\n" + " several possible explanations:\n\n" + + " - The test case causes known crashes under normal working conditions. If\n" + " so, please remove it. The fuzzer should be seeded with interesting\n" + " inputs - but not ones that cause an outright crash.\n\n" + +#ifdef __APPLE__ + + " - On MacOS X, the semantics of fork() syscalls are non-standard and may\n" + " break afl-fuzz performance optimizations when running platform-specific\n" + " binaries. To fix this, set AFL_NO_FORKSRV=1 in the environment.\n\n" + +#endif /* __APPLE__ */ + + " - Least likely, there is a horrible bug in the fuzzer. If other options\n" + " fail, poke for troubleshooting tips.\n"); + + } + + FATAL("Test case '%s' results in a crash", fn); + + case FAULT_ERROR: + + FATAL("Unable to execute target application ('%s')", argv[0]); + + case FAULT_NOINST: + + FATAL("No instrumentation detected"); + + case FAULT_NOBITS: + + useless_at_start++; + + if (!in_bitmap && !shuffle_queue) + WARNF("No new instrumentation output, test case may be useless."); + + break; + + } + + if (q->var_behavior) WARNF("Instrumentation output varies across runs."); + + q = q->next; + + } + + if (cal_failures) { + + if (cal_failures == queued_paths) + FATAL("All test cases time out%s, giving up!", + skip_crashes ? " or crash" : ""); + + WARNF("Skipped %u test cases (%0.02f%%) due to timeouts%s.", cal_failures, + ((double)cal_failures) * 100 / queued_paths, + skip_crashes ? " or crashes" : ""); + + if (cal_failures * 5 > queued_paths) + WARNF(cLRD "High percentage of rejected test cases, check settings!"); + + } + + OKF("All test cases processed."); + +} + + +/* Helper function: link() if possible, copy otherwise. */ + +static void link_or_copy(u8* old_path, u8* new_path) { + + s32 i = link(old_path, new_path); + s32 sfd, dfd; + u8* tmp; + + if (!i) return; + + sfd = open(old_path, O_RDONLY); + if (sfd < 0) PFATAL("Unable to open '%s'", old_path); + + dfd = open(new_path, O_WRONLY | O_CREAT | O_EXCL, 0600); + if (dfd < 0) PFATAL("Unable to create '%s'", new_path); + + tmp = ck_alloc(64 * 1024); + + while ((i = read(sfd, tmp, 64 * 1024)) > 0) + ck_write(dfd, tmp, i, new_path); + + if (i < 0) PFATAL("read() failed"); + + ck_free(tmp); + close(sfd); + close(dfd); + +} + + +static void nuke_resume_dir(void); + +/* Create hard links for input test cases in the output directory, choosing + good names and pivoting accordingly. */ + +static void pivot_inputs(void) { + + struct queue_entry* q = queue; + u32 id = 0; + + ACTF("Creating hard links for all input files..."); + + while (q) { + + u8 *nfn, *rsl = strrchr(q->fname, '/'); + u32 orig_id; + + if (!rsl) rsl = q->fname; else rsl++; + + /* If the original file name conforms to the syntax and the recorded + ID matches the one we'd assign, just use the original file name. + This is valuable for resuming fuzzing runs. */ + +#ifndef SIMPLE_FILES +# define CASE_PREFIX "id:" +#else +# define CASE_PREFIX "id_" +#endif /* ^!SIMPLE_FILES */ + + if (!strncmp(rsl, CASE_PREFIX, 3) && + sscanf(rsl + 3, "%06u", &orig_id) == 1 && orig_id == id) { + + u8* src_str; + u32 src_id; + + resuming_fuzz = 1; + nfn = alloc_printf("%s/queue/%s", out_dir, rsl); + + /* Since we're at it, let's also try to find parent and figure out the + appropriate depth for this entry. */ + + src_str = strchr(rsl + 3, ':'); + + if (src_str && sscanf(src_str + 1, "%06u", &src_id) == 1) { + + struct queue_entry* s = queue; + while (src_id-- && s) s = s->next; + if (s) q->depth = s->depth + 1; + + if (max_depth < q->depth) max_depth = q->depth; + + } + + } else { + + /* No dice - invent a new name, capturing the original one as a + substring. */ + +#ifndef SIMPLE_FILES + + u8* use_name = strstr(rsl, ",orig:"); + + if (use_name) use_name += 6; else use_name = rsl; + nfn = alloc_printf("%s/queue/id:%06u,orig:%s", out_dir, id, use_name); + +#else + + nfn = alloc_printf("%s/queue/id_%06u", out_dir, id); + +#endif /* ^!SIMPLE_FILES */ + + } + + /* Pivot to the new queue entry. */ + + link_or_copy(q->fname, nfn); + ck_free(q->fname); + q->fname = nfn; + + /* Make sure that the passed_det value carries over, too. */ + + if (q->passed_det) mark_as_det_done(q); + + q = q->next; + id++; + + } + + if (in_place_resume) nuke_resume_dir(); + +} + + +#ifndef SIMPLE_FILES + +/* Construct a file name for a new test case, capturing the operation + that led to its discovery. Uses a static buffer. */ + +static u8* describe_op(u8 hnb) { + + static u8 ret[256]; + + if (syncing_party) { + + sprintf(ret, "sync:%s,src:%06u", syncing_party, syncing_case); + + } else { + + sprintf(ret, "src:%06u", current_entry); + + if (splicing_with >= 0) + sprintf(ret + strlen(ret), "+%06u", splicing_with); + + sprintf(ret + strlen(ret), ",op:%s", stage_short); + + if (stage_cur_byte >= 0) { + + sprintf(ret + strlen(ret), ",pos:%u", stage_cur_byte); + + if (stage_val_type != STAGE_VAL_NONE) + sprintf(ret + strlen(ret), ",val:%s%+d", + (stage_val_type == STAGE_VAL_BE) ? "be:" : "", + stage_cur_val); + + } else sprintf(ret + strlen(ret), ",rep:%u", stage_cur_val); + + } + + if (hnb == 2) strcat(ret, ",+cov"); + + return ret; + +} + +#endif /* !SIMPLE_FILES */ + + +/* Write a message accompanying the crash directory :-) */ + +static void write_crash_readme(void) { + + u8* fn = alloc_printf("%s/crashes/README.txt", out_dir); + s32 fd; + FILE* f; + + fd = open(fn, O_WRONLY | O_CREAT | O_EXCL, 0600); + ck_free(fn); + + /* Do not die on errors here - that would be impolite. */ + + if (fd < 0) return; + + f = fdopen(fd, "w"); + + if (!f) { + close(fd); + return; + } + + fprintf(f, "Command line used to find this crash:\n\n" + + "%s\n\n" + + "If you can't reproduce a bug outside of afl-fuzz, be sure to set the same\n" + "memory limit. The limit used for this fuzzing session was %s.\n\n" + + "Need a tool to minimize test cases before investigating the crashes or sending\n" + "them to a vendor? Check out the afl-tmin that comes with the fuzzer!\n\n" + + "Found any cool bugs in open-source tools using afl-fuzz? If yes, please drop\n" + "me a mail at once the issues are fixed - I'd love to\n" + "add your finds to the gallery at:\n\n" + + " http://lcamtuf.coredump.cx/afl/\n\n" + + "Thanks :-)\n", + + orig_cmdline, DMS(mem_limit << 20)); /* ignore errors */ + + fclose(f); + +} + + +/* Check if the result of an execve() during routine fuzzing is interesting, + save or queue the input test case for further analysis if so. Returns 1 if + entry is saved, 0 otherwise. */ + +static u8 save_if_interesting(char** argv, void* mem, u32 len, u8 fault) { + + u8 *fn = ""; + u8 hnb; + s32 fd; + u8 keeping = 0, res; + + if (fault == crash_mode) { + + /* Keep only if there are new bits in the map, add to queue for + future fuzzing, etc. */ + + if (!(hnb = has_new_bits(virgin_bits))) { + if (crash_mode) total_crashes++; + return 0; + } + +#ifndef SIMPLE_FILES + + fn = alloc_printf("%s/queue/id:%06u,%s", out_dir, queued_paths, + describe_op(hnb)); + +#else + + fn = alloc_printf("%s/queue/id_%06u", out_dir, queued_paths); + +#endif /* ^!SIMPLE_FILES */ + + add_to_queue(fn, len, 0); + + if (hnb == 2) { + queue_top->has_new_cov = 1; + queued_with_cov++; + } + + queue_top->exec_cksum = hash32(trace_bits, MAP_SIZE, HASH_CONST); + + /* Try to calibrate inline; this also calls update_bitmap_score() when + successful. */ + + res = calibrate_case(argv, queue_top, mem, queue_cycle - 1, 0); + + if (res == FAULT_ERROR) + FATAL("Unable to execute target application"); + + fd = open(fn, O_WRONLY | O_CREAT | O_EXCL, 0600); + if (fd < 0) PFATAL("Unable to create '%s'", fn); + ck_write(fd, mem, len, fn); + close(fd); + + keeping = 1; + + } + + switch (fault) { + + case FAULT_TMOUT: + + /* Timeouts are not very interesting, but we're still obliged to keep + a handful of samples. We use the presence of new bits in the + hang-specific bitmap as a signal of uniqueness. In "dumb" mode, we + just keep everything. */ + + total_tmouts++; + + if (unique_hangs >= KEEP_UNIQUE_HANG) return keeping; + + if (!dumb_mode) { + +#ifdef WORD_SIZE_64 + simplify_trace((u64*)trace_bits); +#else + simplify_trace((u32*)trace_bits); +#endif /* ^WORD_SIZE_64 */ + + if (!has_new_bits(virgin_tmout)) return keeping; + + } + + unique_tmouts++; + + /* Before saving, we make sure that it's a genuine hang by re-running + the target with a more generous timeout (unless the default timeout + is already generous). */ + + if (exec_tmout < hang_tmout) { + + u8 new_fault; + write_to_testcase(mem, len); + new_fault = run_target(argv, hang_tmout); + + /* A corner case that one user reported bumping into: increasing the + timeout actually uncovers a crash. Make sure we don't discard it if + so. */ + + if (!stop_soon && new_fault == FAULT_CRASH) goto keep_as_crash; + + if (stop_soon || new_fault != FAULT_TMOUT) return keeping; + + } + +#ifndef SIMPLE_FILES + + fn = alloc_printf("%s/hangs/id:%06llu,%s", out_dir, + unique_hangs, describe_op(0)); + +#else + + fn = alloc_printf("%s/hangs/id_%06llu", out_dir, + unique_hangs); + +#endif /* ^!SIMPLE_FILES */ + + unique_hangs++; + + last_hang_time = get_cur_time(); + + break; + + case FAULT_CRASH: + +keep_as_crash: + + /* This is handled in a manner roughly similar to timeouts, + except for slightly different limits and no need to re-run test + cases. */ + + total_crashes++; + + if (unique_crashes >= KEEP_UNIQUE_CRASH) return keeping; + + if (!dumb_mode) { + +#ifdef WORD_SIZE_64 + simplify_trace((u64*)trace_bits); +#else + simplify_trace((u32*)trace_bits); +#endif /* ^WORD_SIZE_64 */ + + if (!has_new_bits(virgin_crash)) return keeping; + + } + + if (!unique_crashes) write_crash_readme(); + +#ifndef SIMPLE_FILES + + fn = alloc_printf("%s/crashes/id:%06llu,sig:%02u,%s", out_dir, + unique_crashes, kill_signal, describe_op(0)); + +#else + + fn = alloc_printf("%s/crashes/id_%06llu_%02u", out_dir, unique_crashes, + kill_signal); + +#endif /* ^!SIMPLE_FILES */ + + unique_crashes++; + + last_crash_time = get_cur_time(); + last_crash_execs = total_execs; + + break; + + case FAULT_ERROR: FATAL("Unable to execute target application"); + + default: return keeping; + + } + + /* If we're here, we apparently want to save the crash or hang + test case, too. */ + + fd = open(fn, O_WRONLY | O_CREAT | O_EXCL, 0600); + if (fd < 0) PFATAL("Unable to create '%s'", fn); + ck_write(fd, mem, len, fn); + close(fd); + + ck_free(fn); + + return keeping; + +} + + +/* When resuming, try to find the queue position to start from. This makes sense + only when resuming, and when we can find the original fuzzer_stats. */ + +static u32 find_start_position(void) { + + static u8 tmp[4096]; /* Ought to be enough for anybody. */ + + u8 *fn, *off; + s32 fd, i; + u32 ret; + + if (!resuming_fuzz) return 0; + + if (in_place_resume) fn = alloc_printf("%s/fuzzer_stats", out_dir); + else fn = alloc_printf("%s/../fuzzer_stats", in_dir); + + fd = open(fn, O_RDONLY); + ck_free(fn); + + if (fd < 0) return 0; + + i = read(fd, tmp, sizeof(tmp) - 1); (void)i; /* Ignore errors */ + close(fd); + + off = strstr(tmp, "cur_path : "); + if (!off) return 0; + + ret = atoi(off + 20); + if (ret >= queued_paths) ret = 0; + return ret; + +} + + +/* The same, but for timeouts. The idea is that when resuming sessions without + -t given, we don't want to keep auto-scaling the timeout over and over + again to prevent it from growing due to random flukes. */ + +static void find_timeout(void) { + + static u8 tmp[4096]; /* Ought to be enough for anybody. */ + + u8 *fn, *off; + s32 fd, i; + u32 ret; + + if (!resuming_fuzz) return; + + if (in_place_resume) fn = alloc_printf("%s/fuzzer_stats", out_dir); + else fn = alloc_printf("%s/../fuzzer_stats", in_dir); + + fd = open(fn, O_RDONLY); + ck_free(fn); + + if (fd < 0) return; + + i = read(fd, tmp, sizeof(tmp) - 1); (void)i; /* Ignore errors */ + close(fd); + + off = strstr(tmp, "exec_timeout : "); + if (!off) return; + + ret = atoi(off + 20); + if (ret <= 4) return; + + exec_tmout = ret; + timeout_given = 3; + +} + + +/* Update stats file for unattended monitoring. */ + +static void write_stats_file(double bitmap_cvg, double stability, double eps) { + + static double last_bcvg, last_stab, last_eps; + static struct rusage usage; + + u8* fn = alloc_printf("%s/fuzzer_stats", out_dir); + s32 fd; + FILE* f; + + fd = open(fn, O_WRONLY | O_CREAT | O_TRUNC, 0600); + + if (fd < 0) PFATAL("Unable to create '%s'", fn); + + ck_free(fn); + + f = fdopen(fd, "w"); + + if (!f) PFATAL("fdopen() failed"); + + /* Keep last values in case we're called from another context + where exec/sec stats and such are not readily available. */ + + if (!bitmap_cvg && !stability && !eps) { + bitmap_cvg = last_bcvg; + stability = last_stab; + eps = last_eps; + } else { + last_bcvg = bitmap_cvg; + last_stab = stability; + last_eps = eps; + } + + fprintf(f, "start_time : %llu\n" + "last_update : %llu\n" + "fuzzer_pid : %u\n" + "cycles_done : %llu\n" + "execs_done : %llu\n" + "execs_per_sec : %0.02f\n" + "paths_total : %u\n" + "paths_favored : %u\n" + "paths_found : %u\n" + "paths_imported : %u\n" + "max_depth : %u\n" + "cur_path : %u\n" /* Must match find_start_position() */ + "pending_favs : %u\n" + "pending_total : %u\n" + "variable_paths : %u\n" + "stability : %0.02f%%\n" + "bitmap_cvg : %0.02f%%\n" + "unique_crashes : %llu\n" + "unique_hangs : %llu\n" + "last_path : %llu\n" + "last_crash : %llu\n" + "last_hang : %llu\n" + "execs_since_crash : %llu\n" + "exec_timeout : %u\n" /* Must match find_timeout() */ + "afl_banner : %s\n" + "afl_version : " VERSION "\n" + "target_mode : %s%s%s%s%s%s%s\n" + "command_line : %s\n" + "slowest_exec_ms : %llu\n", + start_time / 1000, get_cur_time() / 1000, getpid(), + queue_cycle ? (queue_cycle - 1) : 0, total_execs, eps, + queued_paths, queued_favored, queued_discovered, queued_imported, + max_depth, current_entry, pending_favored, pending_not_fuzzed, + queued_variable, stability, bitmap_cvg, unique_crashes, + unique_hangs, last_path_time / 1000, last_crash_time / 1000, + last_hang_time / 1000, total_execs - last_crash_execs, + exec_tmout, use_banner, + qemu_mode ? "qemu " : "", dumb_mode ? " dumb " : "", + no_forkserver ? "no_forksrv " : "", crash_mode ? "crash " : "", + persistent_mode ? "persistent " : "", deferred_mode ? "deferred " : "", + (qemu_mode || dumb_mode || no_forkserver || crash_mode || + persistent_mode || deferred_mode) ? "" : "default", + orig_cmdline, slowest_exec_ms); + /* ignore errors */ + + /* Get rss value from the children + We must have killed the forkserver process and called waitpid + before calling getrusage */ + if (getrusage(RUSAGE_CHILDREN, &usage)) { + WARNF("getrusage failed"); + } else if (usage.ru_maxrss == 0) { + fprintf(f, "peak_rss_mb : not available while afl is running\n"); + } else { +#ifdef __APPLE__ + fprintf(f, "peak_rss_mb : %zu\n", usage.ru_maxrss >> 20); +#else + fprintf(f, "peak_rss_mb : %zu\n", usage.ru_maxrss >> 10); +#endif /* ^__APPLE__ */ + } + + fclose(f); + +} + + +/* Update the plot file if there is a reason to. */ + +static void maybe_update_plot_file(double bitmap_cvg, double eps) { + + static u32 prev_qp, prev_pf, prev_pnf, prev_ce, prev_md; + static u64 prev_qc, prev_uc, prev_uh; + + if (prev_qp == queued_paths && prev_pf == pending_favored && + prev_pnf == pending_not_fuzzed && prev_ce == current_entry && + prev_qc == queue_cycle && prev_uc == unique_crashes && + prev_uh == unique_hangs && prev_md == max_depth) return; + + prev_qp = queued_paths; + prev_pf = pending_favored; + prev_pnf = pending_not_fuzzed; + prev_ce = current_entry; + prev_qc = queue_cycle; + prev_uc = unique_crashes; + prev_uh = unique_hangs; + prev_md = max_depth; + + /* Fields in the file: + + unix_time, cycles_done, cur_path, paths_total, paths_not_fuzzed, + favored_not_fuzzed, unique_crashes, unique_hangs, max_depth, + execs_per_sec */ + + fprintf(plot_file, + "%llu, %llu, %u, %u, %u, %u, %0.02f%%, %llu, %llu, %u, %0.02f\n", + get_cur_time() / 1000, queue_cycle - 1, current_entry, queued_paths, + pending_not_fuzzed, pending_favored, bitmap_cvg, unique_crashes, + unique_hangs, max_depth, eps); /* ignore errors */ + + fflush(plot_file); + +} + + + +/* A helper function for maybe_delete_out_dir(), deleting all prefixed + files in a directory. */ + +static u8 delete_files(u8* path, u8* prefix) { + + DIR* d; + struct dirent* d_ent; + + d = opendir(path); + + if (!d) return 0; + + while ((d_ent = readdir(d))) { + + if (d_ent->d_name[0] != '.' && (!prefix || + !strncmp(d_ent->d_name, prefix, strlen(prefix)))) { + + u8* fname = alloc_printf("%s/%s", path, d_ent->d_name); + if (unlink(fname)) PFATAL("Unable to delete '%s'", fname); + ck_free(fname); + + } + + } + + closedir(d); + + return !!rmdir(path); + +} + + +/* Get the number of runnable processes, with some simple smoothing. */ + +static double get_runnable_processes(void) { + + static double res; + +#if defined(__APPLE__) || defined(__FreeBSD__) || defined (__OpenBSD__) + + /* I don't see any portable sysctl or so that would quickly give us the + number of runnable processes; the 1-minute load average can be a + semi-decent approximation, though. */ + + if (getloadavg(&res, 1) != 1) return 0; + +#else + + /* On Linux, /proc/stat is probably the best way; load averages are + computed in funny ways and sometimes don't reflect extremely short-lived + processes well. */ + + FILE* f = fopen("/proc/stat", "r"); + u8 tmp[1024]; + u32 val = 0; + + if (!f) return 0; + + while (fgets(tmp, sizeof(tmp), f)) { + + if (!strncmp(tmp, "procs_running ", 14) || + !strncmp(tmp, "procs_blocked ", 14)) val += atoi(tmp + 14); + + } + + fclose(f); + + if (!res) { + + res = val; + + } else { + + res = res * (1.0 - 1.0 / AVG_SMOOTHING) + + ((double)val) * (1.0 / AVG_SMOOTHING); + + } + +#endif /* ^(__APPLE__ || __FreeBSD__ || __OpenBSD__) */ + + return res; + +} + + +/* Delete the temporary directory used for in-place session resume. */ + +static void nuke_resume_dir(void) { + + u8* fn; + + fn = alloc_printf("%s/_resume/.state/deterministic_done", out_dir); + if (delete_files(fn, CASE_PREFIX)) goto dir_cleanup_failed; + ck_free(fn); + + fn = alloc_printf("%s/_resume/.state/auto_extras", out_dir); + if (delete_files(fn, "auto_")) goto dir_cleanup_failed; + ck_free(fn); + + fn = alloc_printf("%s/_resume/.state/redundant_edges", out_dir); + if (delete_files(fn, CASE_PREFIX)) goto dir_cleanup_failed; + ck_free(fn); + + fn = alloc_printf("%s/_resume/.state/variable_behavior", out_dir); + if (delete_files(fn, CASE_PREFIX)) goto dir_cleanup_failed; + ck_free(fn); + + fn = alloc_printf("%s/_resume/.state", out_dir); + if (rmdir(fn) && errno != ENOENT) goto dir_cleanup_failed; + ck_free(fn); + + fn = alloc_printf("%s/_resume", out_dir); + if (delete_files(fn, CASE_PREFIX)) goto dir_cleanup_failed; + ck_free(fn); + + return; + +dir_cleanup_failed: + + FATAL("_resume directory cleanup failed"); + +} + + +/* Delete fuzzer output directory if we recognize it as ours, if the fuzzer + is not currently running, and if the last run time isn't too great. */ + +static void maybe_delete_out_dir(void) { + + FILE* f; + u8 *fn = alloc_printf("%s/fuzzer_stats", out_dir); + + /* See if the output directory is locked. If yes, bail out. If not, + create a lock that will persist for the lifetime of the process + (this requires leaving the descriptor open).*/ + + out_dir_fd = open(out_dir, O_RDONLY); + if (out_dir_fd < 0) PFATAL("Unable to open '%s'", out_dir); + +#ifndef __sun + + if (flock(out_dir_fd, LOCK_EX | LOCK_NB) && errno == EWOULDBLOCK) { + + SAYF("\n" cLRD "[-] " cRST + "Looks like the job output directory is being actively used by another\n" + " instance of afl-fuzz. You will need to choose a different %s\n" + " or stop the other process first.\n", + sync_id ? "fuzzer ID" : "output location"); + + FATAL("Directory '%s' is in use", out_dir); + + } + +#endif /* !__sun */ + + f = fopen(fn, "r"); + + if (f) { + + u64 start_time, last_update; + + if (fscanf(f, "start_time : %llu\n" + "last_update : %llu\n", &start_time, &last_update) != 2) + FATAL("Malformed data in '%s'", fn); + + fclose(f); + + /* Let's see how much work is at stake. */ + + if (!in_place_resume && last_update - start_time > OUTPUT_GRACE * 60) { + + SAYF("\n" cLRD "[-] " cRST + "The job output directory already exists and contains the results of more\n" + " than %u minutes worth of fuzzing. To avoid data loss, afl-fuzz will *NOT*\n" + " automatically delete this data for you.\n\n" + + " If you wish to start a new session, remove or rename the directory manually,\n" + " or specify a different output location for this job. To resume the old\n" + " session, put '-' as the input directory in the command line ('-i -') and\n" + " try again.\n", OUTPUT_GRACE); + + FATAL("At-risk data found in '%s'", out_dir); + + } + + } + + ck_free(fn); + + /* The idea for in-place resume is pretty simple: we temporarily move the old + queue/ to a new location that gets deleted once import to the new queue/ + is finished. If _resume/ already exists, the current queue/ may be + incomplete due to an earlier abort, so we want to use the old _resume/ + dir instead, and we let rename() fail silently. */ + + if (in_place_resume) { + + u8* orig_q = alloc_printf("%s/queue", out_dir); + + in_dir = alloc_printf("%s/_resume", out_dir); + + rename(orig_q, in_dir); /* Ignore errors */ + + OKF("Output directory exists, will attempt session resume."); + + ck_free(orig_q); + + } else { + + OKF("Output directory exists but deemed OK to reuse."); + + } + + ACTF("Deleting old session data..."); + + /* Okay, let's get the ball rolling! First, we need to get rid of the entries + in /.synced/.../id:*, if any are present. */ + + if (!in_place_resume) { + + fn = alloc_printf("%s/.synced", out_dir); + if (delete_files(fn, NULL)) goto dir_cleanup_failed; + ck_free(fn); + + } + + /* Next, we need to clean up /queue/.state/ subdirectories: */ + + fn = alloc_printf("%s/queue/.state/deterministic_done", out_dir); + if (delete_files(fn, CASE_PREFIX)) goto dir_cleanup_failed; + ck_free(fn); + + fn = alloc_printf("%s/queue/.state/auto_extras", out_dir); + if (delete_files(fn, "auto_")) goto dir_cleanup_failed; + ck_free(fn); + + fn = alloc_printf("%s/queue/.state/redundant_edges", out_dir); + if (delete_files(fn, CASE_PREFIX)) goto dir_cleanup_failed; + ck_free(fn); + + fn = alloc_printf("%s/queue/.state/variable_behavior", out_dir); + if (delete_files(fn, CASE_PREFIX)) goto dir_cleanup_failed; + ck_free(fn); + + /* Then, get rid of the .state subdirectory itself (should be empty by now) + and everything matching /queue/id:*. */ + + fn = alloc_printf("%s/queue/.state", out_dir); + if (rmdir(fn) && errno != ENOENT) goto dir_cleanup_failed; + ck_free(fn); + + fn = alloc_printf("%s/queue", out_dir); + if (delete_files(fn, CASE_PREFIX)) goto dir_cleanup_failed; + ck_free(fn); + + /* All right, let's do /crashes/id:* and /hangs/id:*. */ + + if (!in_place_resume) { + + fn = alloc_printf("%s/crashes/README.txt", out_dir); + unlink(fn); /* Ignore errors */ + ck_free(fn); + + } + + fn = alloc_printf("%s/crashes", out_dir); + + /* Make backup of the crashes directory if it's not empty and if we're + doing in-place resume. */ + + if (in_place_resume && rmdir(fn)) { + + time_t cur_t = time(0); + struct tm* t = localtime(&cur_t); + +#ifndef SIMPLE_FILES + + u8* nfn = alloc_printf("%s.%04u-%02u-%02u-%02u:%02u:%02u", fn, + t->tm_year + 1900, t->tm_mon + 1, t->tm_mday, + t->tm_hour, t->tm_min, t->tm_sec); + +#else + + u8* nfn = alloc_printf("%s_%04u%02u%02u%02u%02u%02u", fn, + t->tm_year + 1900, t->tm_mon + 1, t->tm_mday, + t->tm_hour, t->tm_min, t->tm_sec); + +#endif /* ^!SIMPLE_FILES */ + + rename(fn, nfn); /* Ignore errors. */ + ck_free(nfn); + + } + + if (delete_files(fn, CASE_PREFIX)) goto dir_cleanup_failed; + ck_free(fn); + + fn = alloc_printf("%s/hangs", out_dir); + + /* Backup hangs, too. */ + + if (in_place_resume && rmdir(fn)) { + + time_t cur_t = time(0); + struct tm* t = localtime(&cur_t); + +#ifndef SIMPLE_FILES + + u8* nfn = alloc_printf("%s.%04u-%02u-%02u-%02u:%02u:%02u", fn, + t->tm_year + 1900, t->tm_mon + 1, t->tm_mday, + t->tm_hour, t->tm_min, t->tm_sec); + +#else + + u8* nfn = alloc_printf("%s_%04u%02u%02u%02u%02u%02u", fn, + t->tm_year + 1900, t->tm_mon + 1, t->tm_mday, + t->tm_hour, t->tm_min, t->tm_sec); + +#endif /* ^!SIMPLE_FILES */ + + rename(fn, nfn); /* Ignore errors. */ + ck_free(nfn); + + } + + if (delete_files(fn, CASE_PREFIX)) goto dir_cleanup_failed; + ck_free(fn); + + /* And now, for some finishing touches. */ + + fn = alloc_printf("%s/.cur_input", out_dir); + if (unlink(fn) && errno != ENOENT) goto dir_cleanup_failed; + ck_free(fn); + + fn = alloc_printf("%s/fuzz_bitmap", out_dir); + if (unlink(fn) && errno != ENOENT) goto dir_cleanup_failed; + ck_free(fn); + + if (!in_place_resume) { + fn = alloc_printf("%s/fuzzer_stats", out_dir); + if (unlink(fn) && errno != ENOENT) goto dir_cleanup_failed; + ck_free(fn); + } + + fn = alloc_printf("%s/plot_data", out_dir); + if (unlink(fn) && errno != ENOENT) goto dir_cleanup_failed; + ck_free(fn); + + OKF("Output dir cleanup successful."); + + /* Wow... is that all? If yes, celebrate! */ + + return; + +dir_cleanup_failed: + + SAYF("\n" cLRD "[-] " cRST + "Whoops, the fuzzer tried to reuse your output directory, but bumped into\n" + " some files that shouldn't be there or that couldn't be removed - so it\n" + " decided to abort! This happened while processing this path:\n\n" + + " %s\n\n" + " Please examine and manually delete the files, or specify a different\n" + " output location for the tool.\n", fn); + + FATAL("Output directory cleanup failed"); + +} + + +static void check_term_size(void); + + +/* A spiffy retro stats screen! This is called every stats_update_freq + execve() calls, plus in several other circumstances. */ + +static void show_stats(void) { + + static u64 last_stats_ms, last_plot_ms, last_ms, last_execs; + static double avg_exec; + double t_byte_ratio, stab_ratio; + + u64 cur_ms; + u32 t_bytes, t_bits; + + u32 banner_len, banner_pad; + u8 tmp[256]; + + cur_ms = get_cur_time(); + + /* If not enough time has passed since last UI update, bail out. */ + + if (cur_ms - last_ms < 1000 / UI_TARGET_HZ) return; + + /* Check if we're past the 10 minute mark. */ + + if (cur_ms - start_time > 10 * 60 * 1000) run_over10m = 1; + + /* Calculate smoothed exec speed stats. */ + + if (!last_execs) { + + avg_exec = ((double)total_execs) * 1000 / (cur_ms - start_time); + + } else { + + double cur_avg = ((double)(total_execs - last_execs)) * 1000 / + (cur_ms - last_ms); + + /* If there is a dramatic (5x+) jump in speed, reset the indicator + more quickly. */ + + if (cur_avg * 5 < avg_exec || cur_avg / 5 > avg_exec) + avg_exec = cur_avg; + + avg_exec = avg_exec * (1.0 - 1.0 / AVG_SMOOTHING) + + cur_avg * (1.0 / AVG_SMOOTHING); + + } + + last_ms = cur_ms; + last_execs = total_execs; + + /* Tell the callers when to contact us (as measured in execs). */ + + stats_update_freq = avg_exec / (UI_TARGET_HZ * 10); + if (!stats_update_freq) stats_update_freq = 1; + + /* Do some bitmap stats. */ + + t_bytes = count_non_255_bytes(virgin_bits); + t_byte_ratio = ((double)t_bytes * 100) / MAP_SIZE; + + if (t_bytes) + stab_ratio = 100 - ((double)var_byte_count) * 100 / t_bytes; + else + stab_ratio = 100; + + /* Roughly every minute, update fuzzer stats and save auto tokens. */ + + if (cur_ms - last_stats_ms > STATS_UPDATE_SEC * 1000) { + + last_stats_ms = cur_ms; + write_stats_file(t_byte_ratio, stab_ratio, avg_exec); + save_auto(); + write_bitmap(); + + } + + /* Every now and then, write plot data. */ + + if (cur_ms - last_plot_ms > PLOT_UPDATE_SEC * 1000) { + + last_plot_ms = cur_ms; + maybe_update_plot_file(t_byte_ratio, avg_exec); + + } + + /* Honor AFL_EXIT_WHEN_DONE and AFL_BENCH_UNTIL_CRASH. */ + + if (!dumb_mode && cycles_wo_finds > 100 && !pending_not_fuzzed && + getenv("AFL_EXIT_WHEN_DONE")) stop_soon = 2; + + if (total_crashes && getenv("AFL_BENCH_UNTIL_CRASH")) stop_soon = 2; + + /* If we're not on TTY, bail out. */ + + if (not_on_tty) return; + + /* Compute some mildly useful bitmap stats. */ + + t_bits = (MAP_SIZE << 3) - count_bits(virgin_bits); + + /* Now, for the visuals... */ + + if (clear_screen) { + + SAYF(TERM_CLEAR CURSOR_HIDE); + clear_screen = 0; + + check_term_size(); + + } + + SAYF(TERM_HOME); + + if (term_too_small) { + + SAYF(cBRI "Your terminal is too small to display the UI.\n" + "Please resize terminal window to at least 80x25.\n" cRST); + + return; + + } + + /* Let's start by drawing a centered banner. */ + + banner_len = (crash_mode ? 24 : 22) + strlen(VERSION) + strlen(use_banner); + banner_pad = (80 - banner_len) / 2; + memset(tmp, ' ', banner_pad); + + sprintf(tmp + banner_pad, "%s " cLCY VERSION cLGN + " (%s)", crash_mode ? cPIN "peruvian were-rabbit" : + cYEL "american fuzzy lop", use_banner); + + SAYF("\n%s\n\n", tmp); + + /* "Handy" shortcuts for drawing boxes... */ + +#define bSTG bSTART cGRA +#define bH2 bH bH +#define bH5 bH2 bH2 bH +#define bH10 bH5 bH5 +#define bH20 bH10 bH10 +#define bH30 bH20 bH10 +#define SP5 " " +#define SP10 SP5 SP5 +#define SP20 SP10 SP10 + + /* Lord, forgive me this. */ + + SAYF(SET_G1 bSTG bLT bH bSTOP cCYA " process timing " bSTG bH30 bH5 bH2 bHB + bH bSTOP cCYA " overall results " bSTG bH5 bRT "\n"); + + if (dumb_mode) { + + strcpy(tmp, cRST); + + } else { + + u64 min_wo_finds = (cur_ms - last_path_time) / 1000 / 60; + + /* First queue cycle: don't stop now! */ + if (queue_cycle == 1 || min_wo_finds < 15) strcpy(tmp, cMGN); else + + /* Subsequent cycles, but we're still making finds. */ + if (cycles_wo_finds < 25 || min_wo_finds < 30) strcpy(tmp, cYEL); else + + /* No finds for a long time and no test cases to try. */ + if (cycles_wo_finds > 100 && !pending_not_fuzzed && min_wo_finds > 120) + strcpy(tmp, cLGN); + + /* Default: cautiously OK to stop? */ + else strcpy(tmp, cLBL); + + } + + SAYF(bV bSTOP " run time : " cRST "%-34s " bSTG bV bSTOP + " cycles done : %s%-5s " bSTG bV "\n", + DTD(cur_ms, start_time), tmp, DI(queue_cycle - 1)); + + /* We want to warn people about not seeing new paths after a full cycle, + except when resuming fuzzing or running in non-instrumented mode. */ + + if (!dumb_mode && (last_path_time || resuming_fuzz || queue_cycle == 1 || + in_bitmap || crash_mode)) { + + SAYF(bV bSTOP " last new path : " cRST "%-34s ", + DTD(cur_ms, last_path_time)); + + } else { + + if (dumb_mode) + + SAYF(bV bSTOP " last new path : " cPIN "n/a" cRST + " (non-instrumented mode) "); + + else + + SAYF(bV bSTOP " last new path : " cRST "none yet " cLRD + "(odd, check syntax!) "); + + } + + SAYF(bSTG bV bSTOP " total paths : " cRST "%-5s " bSTG bV "\n", + DI(queued_paths)); + + /* Highlight crashes in red if found, denote going over the KEEP_UNIQUE_CRASH + limit with a '+' appended to the count. */ + + sprintf(tmp, "%s%s", DI(unique_crashes), + (unique_crashes >= KEEP_UNIQUE_CRASH) ? "+" : ""); + + SAYF(bV bSTOP " last uniq crash : " cRST "%-34s " bSTG bV bSTOP + " uniq crashes : %s%-6s " bSTG bV "\n", + DTD(cur_ms, last_crash_time), unique_crashes ? cLRD : cRST, + tmp); + + sprintf(tmp, "%s%s", DI(unique_hangs), + (unique_hangs >= KEEP_UNIQUE_HANG) ? "+" : ""); + + SAYF(bV bSTOP " last uniq hang : " cRST "%-34s " bSTG bV bSTOP + " uniq hangs : " cRST "%-6s " bSTG bV "\n", + DTD(cur_ms, last_hang_time), tmp); + + SAYF(bVR bH bSTOP cCYA " cycle progress " bSTG bH20 bHB bH bSTOP cCYA + " map coverage " bSTG bH bHT bH20 bH2 bH bVL "\n"); + + /* This gets funny because we want to print several variable-length variables + together, but then cram them into a fixed-width field - so we need to + put them in a temporary buffer first. */ + + sprintf(tmp, "%s%s (%0.02f%%)", DI(current_entry), + queue_cur->favored ? "" : "*", + ((double)current_entry * 100) / queued_paths); + + SAYF(bV bSTOP " now processing : " cRST "%-17s " bSTG bV bSTOP, tmp); + + sprintf(tmp, "%0.02f%% / %0.02f%%", ((double)queue_cur->bitmap_size) * + 100 / MAP_SIZE, t_byte_ratio); + + SAYF(" map density : %s%-21s " bSTG bV "\n", t_byte_ratio > 70 ? cLRD : + ((t_bytes < 200 && !dumb_mode) ? cPIN : cRST), tmp); + + sprintf(tmp, "%s (%0.02f%%)", DI(cur_skipped_paths), + ((double)cur_skipped_paths * 100) / queued_paths); + + SAYF(bV bSTOP " paths timed out : " cRST "%-17s " bSTG bV, tmp); + + sprintf(tmp, "%0.02f bits/tuple", + t_bytes ? (((double)t_bits) / t_bytes) : 0); + + SAYF(bSTOP " count coverage : " cRST "%-21s " bSTG bV "\n", tmp); + + SAYF(bVR bH bSTOP cCYA " stage progress " bSTG bH20 bX bH bSTOP cCYA + " findings in depth " bSTG bH20 bVL "\n"); + + sprintf(tmp, "%s (%0.02f%%)", DI(queued_favored), + ((double)queued_favored) * 100 / queued_paths); + + /* Yeah... it's still going on... halp? */ + + SAYF(bV bSTOP " now trying : " cRST "%-21s " bSTG bV bSTOP + " favored paths : " cRST "%-22s " bSTG bV "\n", stage_name, tmp); + + if (!stage_max) { + + sprintf(tmp, "%s/-", DI(stage_cur)); + + } else { + + sprintf(tmp, "%s/%s (%0.02f%%)", DI(stage_cur), DI(stage_max), + ((double)stage_cur) * 100 / stage_max); + + } + + SAYF(bV bSTOP " stage execs : " cRST "%-21s " bSTG bV bSTOP, tmp); + + sprintf(tmp, "%s (%0.02f%%)", DI(queued_with_cov), + ((double)queued_with_cov) * 100 / queued_paths); + + SAYF(" new edges on : " cRST "%-22s " bSTG bV "\n", tmp); + + sprintf(tmp, "%s (%s%s unique)", DI(total_crashes), DI(unique_crashes), + (unique_crashes >= KEEP_UNIQUE_CRASH) ? "+" : ""); + + if (crash_mode) { + + SAYF(bV bSTOP " total execs : " cRST "%-21s " bSTG bV bSTOP + " new crashes : %s%-22s " bSTG bV "\n", DI(total_execs), + unique_crashes ? cLRD : cRST, tmp); + + } else { + + SAYF(bV bSTOP " total execs : " cRST "%-21s " bSTG bV bSTOP + " total crashes : %s%-22s " bSTG bV "\n", DI(total_execs), + unique_crashes ? cLRD : cRST, tmp); + + } + + /* Show a warning about slow execution. */ + + if (avg_exec < 100) { + + sprintf(tmp, "%s/sec (%s)", DF(avg_exec), avg_exec < 20 ? + "zzzz..." : "slow!"); + + SAYF(bV bSTOP " exec speed : " cLRD "%-21s ", tmp); + + } else { + + sprintf(tmp, "%s/sec", DF(avg_exec)); + SAYF(bV bSTOP " exec speed : " cRST "%-21s ", tmp); + + } + + sprintf(tmp, "%s (%s%s unique)", DI(total_tmouts), DI(unique_tmouts), + (unique_hangs >= KEEP_UNIQUE_HANG) ? "+" : ""); + + SAYF (bSTG bV bSTOP " total tmouts : " cRST "%-22s " bSTG bV "\n", tmp); + + /* Aaaalmost there... hold on! */ + + SAYF(bVR bH cCYA bSTOP " fuzzing strategy yields " bSTG bH10 bH bHT bH10 + bH5 bHB bH bSTOP cCYA " path geometry " bSTG bH5 bH2 bH bVL "\n"); + + if (skip_deterministic) { + + strcpy(tmp, "n/a, n/a, n/a"); + + } else { + + sprintf(tmp, "%s/%s, %s/%s, %s/%s", + DI(stage_finds[STAGE_FLIP1]), DI(stage_cycles[STAGE_FLIP1]), + DI(stage_finds[STAGE_FLIP2]), DI(stage_cycles[STAGE_FLIP2]), + DI(stage_finds[STAGE_FLIP4]), DI(stage_cycles[STAGE_FLIP4])); + + } + + SAYF(bV bSTOP " bit flips : " cRST "%-37s " bSTG bV bSTOP " levels : " + cRST "%-10s " bSTG bV "\n", tmp, DI(max_depth)); + + if (!skip_deterministic) + sprintf(tmp, "%s/%s, %s/%s, %s/%s", + DI(stage_finds[STAGE_FLIP8]), DI(stage_cycles[STAGE_FLIP8]), + DI(stage_finds[STAGE_FLIP16]), DI(stage_cycles[STAGE_FLIP16]), + DI(stage_finds[STAGE_FLIP32]), DI(stage_cycles[STAGE_FLIP32])); + + SAYF(bV bSTOP " byte flips : " cRST "%-37s " bSTG bV bSTOP " pending : " + cRST "%-10s " bSTG bV "\n", tmp, DI(pending_not_fuzzed)); + + if (!skip_deterministic) + sprintf(tmp, "%s/%s, %s/%s, %s/%s", + DI(stage_finds[STAGE_ARITH8]), DI(stage_cycles[STAGE_ARITH8]), + DI(stage_finds[STAGE_ARITH16]), DI(stage_cycles[STAGE_ARITH16]), + DI(stage_finds[STAGE_ARITH32]), DI(stage_cycles[STAGE_ARITH32])); + + SAYF(bV bSTOP " arithmetics : " cRST "%-37s " bSTG bV bSTOP " pend fav : " + cRST "%-10s " bSTG bV "\n", tmp, DI(pending_favored)); + + if (!skip_deterministic) + sprintf(tmp, "%s/%s, %s/%s, %s/%s", + DI(stage_finds[STAGE_INTEREST8]), DI(stage_cycles[STAGE_INTEREST8]), + DI(stage_finds[STAGE_INTEREST16]), DI(stage_cycles[STAGE_INTEREST16]), + DI(stage_finds[STAGE_INTEREST32]), DI(stage_cycles[STAGE_INTEREST32])); + + SAYF(bV bSTOP " known ints : " cRST "%-37s " bSTG bV bSTOP " own finds : " + cRST "%-10s " bSTG bV "\n", tmp, DI(queued_discovered)); + + if (!skip_deterministic) + sprintf(tmp, "%s/%s, %s/%s, %s/%s", + DI(stage_finds[STAGE_EXTRAS_UO]), DI(stage_cycles[STAGE_EXTRAS_UO]), + DI(stage_finds[STAGE_EXTRAS_UI]), DI(stage_cycles[STAGE_EXTRAS_UI]), + DI(stage_finds[STAGE_EXTRAS_AO]), DI(stage_cycles[STAGE_EXTRAS_AO])); + + SAYF(bV bSTOP " dictionary : " cRST "%-37s " bSTG bV bSTOP + " imported : " cRST "%-10s " bSTG bV "\n", tmp, + sync_id ? DI(queued_imported) : (u8*)"n/a"); + + sprintf(tmp, "%s/%s, %s/%s", + DI(stage_finds[STAGE_HAVOC]), DI(stage_cycles[STAGE_HAVOC]), + DI(stage_finds[STAGE_SPLICE]), DI(stage_cycles[STAGE_SPLICE])); + + SAYF(bV bSTOP " havoc : " cRST "%-37s " bSTG bV bSTOP, tmp); + + if (t_bytes) sprintf(tmp, "%0.02f%%", stab_ratio); + else strcpy(tmp, "n/a"); + + SAYF(" stability : %s%-10s " bSTG bV "\n", (stab_ratio < 85 && var_byte_count > 40) + ? cLRD : ((queued_variable && (!persistent_mode || var_byte_count > 20)) + ? cMGN : cRST), tmp); + + if (!bytes_trim_out) { + + sprintf(tmp, "n/a, "); + + } else { + + sprintf(tmp, "%0.02f%%/%s, ", + ((double)(bytes_trim_in - bytes_trim_out)) * 100 / bytes_trim_in, + DI(trim_execs)); + + } + + if (!blocks_eff_total) { + + u8 tmp2[128]; + + sprintf(tmp2, "n/a"); + strcat(tmp, tmp2); + + } else { + + u8 tmp2[128]; + + sprintf(tmp2, "%0.02f%%", + ((double)(blocks_eff_total - blocks_eff_select)) * 100 / + blocks_eff_total); + + strcat(tmp, tmp2); + + } + + SAYF(bV bSTOP " trim : " cRST "%-37s " bSTG bVR bH20 bH2 bH2 bRB "\n" + bLB bH30 bH20 bH2 bH bRB bSTOP cRST RESET_G1, tmp); + + /* Provide some CPU utilization stats. */ + + if (cpu_core_count) { + + double cur_runnable = get_runnable_processes(); + u32 cur_utilization = cur_runnable * 100 / cpu_core_count; + + u8* cpu_color = cCYA; + + /* If we could still run one or more processes, use green. */ + + if (cpu_core_count > 1 && cur_runnable + 1 <= cpu_core_count) + cpu_color = cLGN; + + /* If we're clearly oversubscribed, use red. */ + + if (!no_cpu_meter_red && cur_utilization >= 150) cpu_color = cLRD; + +#ifdef HAVE_AFFINITY + + if (cpu_aff >= 0) { + + SAYF(SP10 cGRA "[cpu%03u:%s%3u%%" cGRA "]\r" cRST, + MIN(cpu_aff, 999), cpu_color, + MIN(cur_utilization, 999)); + + } else { + + SAYF(SP10 cGRA " [cpu:%s%3u%%" cGRA "]\r" cRST, + cpu_color, MIN(cur_utilization, 999)); + + } + +#else + + SAYF(SP10 cGRA " [cpu:%s%3u%%" cGRA "]\r" cRST, + cpu_color, MIN(cur_utilization, 999)); + +#endif /* ^HAVE_AFFINITY */ + + } else SAYF("\r"); + + /* Hallelujah! */ + + fflush(0); + +} + + +/* Display quick statistics at the end of processing the input directory, + plus a bunch of warnings. Some calibration stuff also ended up here, + along with several hardcoded constants. Maybe clean up eventually. */ + +static void show_init_stats(void) { + + struct queue_entry* q = queue; + u32 min_bits = 0, max_bits = 0; + u64 min_us = 0, max_us = 0; + u64 avg_us = 0; + u32 max_len = 0; + + if (total_cal_cycles) avg_us = total_cal_us / total_cal_cycles; + + while (q) { + + if (!min_us || q->exec_us < min_us) min_us = q->exec_us; + if (q->exec_us > max_us) max_us = q->exec_us; + + if (!min_bits || q->bitmap_size < min_bits) min_bits = q->bitmap_size; + if (q->bitmap_size > max_bits) max_bits = q->bitmap_size; + + if (q->len > max_len) max_len = q->len; + + q = q->next; + + } + + SAYF("\n"); + + if (avg_us > (qemu_mode ? 50000 : 10000)) + WARNF(cLRD "The target binary is pretty slow! See %s/perf_tips.txt.", + doc_path); + + /* Let's keep things moving with slow binaries. */ + + if (avg_us > 50000) havoc_div = 10; /* 0-19 execs/sec */ + else if (avg_us > 20000) havoc_div = 5; /* 20-49 execs/sec */ + else if (avg_us > 10000) havoc_div = 2; /* 50-100 execs/sec */ + + if (!resuming_fuzz) { + + if (max_len > 50 * 1024) + WARNF(cLRD "Some test cases are huge (%s) - see %s/perf_tips.txt!", + DMS(max_len), doc_path); + else if (max_len > 10 * 1024) + WARNF("Some test cases are big (%s) - see %s/perf_tips.txt.", + DMS(max_len), doc_path); + + if (useless_at_start && !in_bitmap) + WARNF(cLRD "Some test cases look useless. Consider using a smaller set."); + + if (queued_paths > 100) + WARNF(cLRD "You probably have far too many input files! Consider trimming down."); + else if (queued_paths > 20) + WARNF("You have lots of input files; try starting small."); + + } + + OKF("Here are some useful stats:\n\n" + + cGRA " Test case count : " cRST "%u favored, %u variable, %u total\n" + cGRA " Bitmap range : " cRST "%u to %u bits (average: %0.02f bits)\n" + cGRA " Exec timing : " cRST "%s to %s us (average: %s us)\n", + queued_favored, queued_variable, queued_paths, min_bits, max_bits, + ((double)total_bitmap_size) / (total_bitmap_entries ? total_bitmap_entries : 1), + DI(min_us), DI(max_us), DI(avg_us)); + + if (!timeout_given) { + + /* Figure out the appropriate timeout. The basic idea is: 5x average or + 1x max, rounded up to EXEC_TM_ROUND ms and capped at 1 second. + + If the program is slow, the multiplier is lowered to 2x or 3x, because + random scheduler jitter is less likely to have any impact, and because + our patience is wearing thin =) */ + + if (avg_us > 50000) exec_tmout = avg_us * 2 / 1000; + else if (avg_us > 10000) exec_tmout = avg_us * 3 / 1000; + else exec_tmout = avg_us * 5 / 1000; + + exec_tmout = MAX(exec_tmout, max_us / 1000); + exec_tmout = (exec_tmout + EXEC_TM_ROUND) / EXEC_TM_ROUND * EXEC_TM_ROUND; + + if (exec_tmout > EXEC_TIMEOUT) exec_tmout = EXEC_TIMEOUT; + + ACTF("No -t option specified, so I'll use exec timeout of %u ms.", + exec_tmout); + + timeout_given = 1; + + } else if (timeout_given == 3) { + + ACTF("Applying timeout settings from resumed session (%u ms).", exec_tmout); + + } + + /* In dumb mode, re-running every timing out test case with a generous time + limit is very expensive, so let's select a more conservative default. */ + + if (dumb_mode && !getenv("AFL_HANG_TMOUT")) + hang_tmout = MIN(EXEC_TIMEOUT, exec_tmout * 2 + 100); + + OKF("All set and ready to roll!"); + +} + + +/* Find first power of two greater or equal to val (assuming val under + 2^31). */ + +static u32 next_p2(u32 val) { + + u32 ret = 1; + while (val > ret) ret <<= 1; + return ret; + +} + + +/* Trim all new test cases to save cycles when doing deterministic checks. The + trimmer uses power-of-two increments somewhere between 1/16 and 1/1024 of + file size, to keep the stage short and sweet. */ + +static u8 trim_case(char** argv, struct queue_entry* q, u8* in_buf) { + + static u8 tmp[64]; + static u8 clean_trace[MAP_SIZE]; + + u8 needs_write = 0, fault = 0; + u32 trim_exec = 0; + u32 remove_len; + u32 len_p2; + + /* Although the trimmer will be less useful when variable behavior is + detected, it will still work to some extent, so we don't check for + this. */ + + if (q->len < 5) return 0; + + stage_name = tmp; + bytes_trim_in += q->len; + + /* Select initial chunk len, starting with large steps. */ + + len_p2 = next_p2(q->len); + + remove_len = MAX(len_p2 / TRIM_START_STEPS, TRIM_MIN_BYTES); + + /* Continue until the number of steps gets too high or the stepover + gets too small. */ + + while (remove_len >= MAX(len_p2 / TRIM_END_STEPS, TRIM_MIN_BYTES)) { + + u32 remove_pos = remove_len; + + sprintf(tmp, "trim %s/%s", DI(remove_len), DI(remove_len)); + + stage_cur = 0; + stage_max = q->len / remove_len; + + while (remove_pos < q->len) { + + u32 trim_avail = MIN(remove_len, q->len - remove_pos); + u32 cksum; + + write_with_gap(in_buf, q->len, remove_pos, trim_avail); + + fault = run_target(argv, exec_tmout); + trim_execs++; + + if (stop_soon || fault == FAULT_ERROR) goto abort_trimming; + + /* Note that we don't keep track of crashes or hangs here; maybe TODO? */ + + cksum = hash32(trace_bits, MAP_SIZE, HASH_CONST); + + /* If the deletion had no impact on the trace, make it permanent. This + isn't perfect for variable-path inputs, but we're just making a + best-effort pass, so it's not a big deal if we end up with false + negatives every now and then. */ + + if (cksum == q->exec_cksum) { + + u32 move_tail = q->len - remove_pos - trim_avail; + + q->len -= trim_avail; + len_p2 = next_p2(q->len); + + memmove(in_buf + remove_pos, in_buf + remove_pos + trim_avail, + move_tail); + + /* Let's save a clean trace, which will be needed by + update_bitmap_score once we're done with the trimming stuff. */ + + if (!needs_write) { + + needs_write = 1; + memcpy(clean_trace, trace_bits, MAP_SIZE); + + } + + } else remove_pos += remove_len; + + /* Since this can be slow, update the screen every now and then. */ + + if (!(trim_exec++ % stats_update_freq)) show_stats(); + stage_cur++; + + } + + remove_len >>= 1; + + } + + /* If we have made changes to in_buf, we also need to update the on-disk + version of the test case. */ + + if (needs_write) { + + s32 fd; + + unlink(q->fname); /* ignore errors */ + + fd = open(q->fname, O_WRONLY | O_CREAT | O_EXCL, 0600); + + if (fd < 0) PFATAL("Unable to create '%s'", q->fname); + + ck_write(fd, in_buf, q->len, q->fname); + close(fd); + + memcpy(trace_bits, clean_trace, MAP_SIZE); + update_bitmap_score(q); + + } + +abort_trimming: + + bytes_trim_out += q->len; + return fault; + +} + + +/* Write a modified test case, run program, process results. Handle + error conditions, returning 1 if it's time to bail out. This is + a helper function for fuzz_one(). */ +//执行模糊测试的通用部分。它负责将变异后的测试用例写入文件，执行目标程序，并处理执行结果。 +EXP_ST u8 common_fuzz_stuff(char** argv, u8* out_buf, u32 len) { + + u8 fault; + + if (post_handler) { + + out_buf = post_handler(out_buf, &len); + if (!out_buf || !len) return 0; + + } + + write_to_testcase(out_buf, len); + + fault = run_target(argv, exec_tmout); + + if (stop_soon) return 1; + + if (fault == FAULT_TMOUT) { + + if (subseq_tmouts++ > TMOUT_LIMIT) { + cur_skipped_paths++; + return 1; + } + + } else subseq_tmouts = 0; + + /* Users can hit us with SIGUSR1 to request the current input + to be abandoned. */ + + if (skip_requested) { + + skip_requested = 0; + cur_skipped_paths++; + return 1; + + } + + /* This handles FAULT_ERROR for us: */ + + queued_discovered += save_if_interesting(argv, out_buf, len, fault); + + if (!(stage_cur % stats_update_freq) || stage_cur + 1 == stage_max) + show_stats(); + + return 0; + +} + + +/* Helper to choose random block len for block operations in fuzz_one(). + Doesn't return zero, provided that max_len is > 0. */ + +static u32 choose_block_len(u32 limit) { + + u32 min_value, max_value; + u32 rlim = MIN(queue_cycle, 3); + + if (!run_over10m) rlim = 1; + + switch (UR(rlim)) { + + case 0: min_value = 1; + max_value = HAVOC_BLK_SMALL; + break; + + case 1: min_value = HAVOC_BLK_SMALL; + max_value = HAVOC_BLK_MEDIUM; + break; + + default: + + if (UR(10)) { + + min_value = HAVOC_BLK_MEDIUM; + max_value = HAVOC_BLK_LARGE; + + } else { + + min_value = HAVOC_BLK_LARGE; + max_value = HAVOC_BLK_XL; + + } + + } + + if (min_value >= limit) min_value = 1; + + return min_value + UR(MIN(max_value, limit) - min_value + 1); + +} + + +/* Calculate case desirability score to adjust the length of havoc fuzzing. + A helper function for fuzz_one(). Maybe some of these constants should + go into config.h. */ + +static u32 calculate_score(struct queue_entry* q) { + + u32 avg_exec_us = total_cal_us / total_cal_cycles; + u32 avg_bitmap_size = total_bitmap_size / total_bitmap_entries; + u32 perf_score = 100; + + /* Adjust score based on execution speed of this path, compared to the + global average. Multiplier ranges from 0.1x to 3x. Fast inputs are + less expensive to fuzz, so we're giving them more air time. */ + + if (q->exec_us * 0.1 > avg_exec_us) perf_score = 10; + else if (q->exec_us * 0.25 > avg_exec_us) perf_score = 25; + else if (q->exec_us * 0.5 > avg_exec_us) perf_score = 50; + else if (q->exec_us * 0.75 > avg_exec_us) perf_score = 75; + else if (q->exec_us * 4 < avg_exec_us) perf_score = 300; + else if (q->exec_us * 3 < avg_exec_us) perf_score = 200; + else if (q->exec_us * 2 < avg_exec_us) perf_score = 150; + + /* Adjust score based on bitmap size. The working theory is that better + coverage translates to better targets. Multiplier from 0.25x to 3x. */ + + if (q->bitmap_size * 0.3 > avg_bitmap_size) perf_score *= 3; + else if (q->bitmap_size * 0.5 > avg_bitmap_size) perf_score *= 2; + else if (q->bitmap_size * 0.75 > avg_bitmap_size) perf_score *= 1.5; + else if (q->bitmap_size * 3 < avg_bitmap_size) perf_score *= 0.25; + else if (q->bitmap_size * 2 < avg_bitmap_size) perf_score *= 0.5; + else if (q->bitmap_size * 1.5 < avg_bitmap_size) perf_score *= 0.75; + + /* Adjust score based on handicap. Handicap is proportional to how late + in the game we learned about this path. Latecomers are allowed to run + for a bit longer until they catch up with the rest. */ + + if (q->handicap >= 4) { + + perf_score *= 4; + q->handicap -= 4; + + } else if (q->handicap) { + + perf_score *= 2; + q->handicap--; + + } + + /* Final adjustment based on input depth, under the assumption that fuzzing + deeper test cases is more likely to reveal stuff that can't be + discovered with traditional fuzzers. */ + + switch (q->depth) { + + case 0 ... 3: break; + case 4 ... 7: perf_score *= 2; break; + case 8 ... 13: perf_score *= 3; break; + case 14 ... 25: perf_score *= 4; break; + default: perf_score *= 5; + + } + + /* Make sure that we don't go over limit. */ + + if (perf_score > HAVOC_MAX_MULT * 100) perf_score = HAVOC_MAX_MULT * 100; + + return perf_score; + +} + + +/* Helper function to see if a particular change (xor_val = old ^ new) could + be a product of deterministic bit flips with the lengths and stepovers + attempted by afl-fuzz. This is used to avoid dupes in some of the + deterministic fuzzing operations that follow bit flips. We also + return 1 if xor_val is zero, which implies that the old and attempted new + values are identical and the exec would be a waste of time. */ + +static u8 could_be_bitflip(u32 xor_val) { + + u32 sh = 0; + + if (!xor_val) return 1; + + /* Shift left until first bit set. */ + + while (!(xor_val & 1)) { sh++; xor_val >>= 1; } + + /* 1-, 2-, and 4-bit patterns are OK anywhere. */ + + if (xor_val == 1 || xor_val == 3 || xor_val == 15) return 1; + + /* 8-, 16-, and 32-bit patterns are OK only if shift factor is + divisible by 8, since that's the stepover for these ops. */ + + if (sh & 7) return 0; + + if (xor_val == 0xff || xor_val == 0xffff || xor_val == 0xffffffff) + return 1; + + return 0; + +} + + +/* Helper function to see if a particular value is reachable through + arithmetic operations. Used for similar purposes. */ + +static u8 could_be_arith(u32 old_val, u32 new_val, u8 blen) { + + u32 i, ov = 0, nv = 0, diffs = 0; + + if (old_val == new_val) return 1; + + /* See if one-byte adjustments to any byte could produce this result. */ + + for (i = 0; i < blen; i++) { + + u8 a = old_val >> (8 * i), + b = new_val >> (8 * i); + + if (a != b) { diffs++; ov = a; nv = b; } + + } + + /* If only one byte differs and the values are within range, return 1. */ + + if (diffs == 1) { + + if ((u8)(ov - nv) <= ARITH_MAX || + (u8)(nv - ov) <= ARITH_MAX) return 1; + + } + + if (blen == 1) return 0; + + /* See if two-byte adjustments to any byte would produce this result. */ + + diffs = 0; + + for (i = 0; i < blen / 2; i++) { + + u16 a = old_val >> (16 * i), + b = new_val >> (16 * i); + + if (a != b) { diffs++; ov = a; nv = b; } + + } + + /* If only one word differs and the values are within range, return 1. */ + + if (diffs == 1) { + + if ((u16)(ov - nv) <= ARITH_MAX || + (u16)(nv - ov) <= ARITH_MAX) return 1; + + ov = SWAP16(ov); nv = SWAP16(nv); + + if ((u16)(ov - nv) <= ARITH_MAX || + (u16)(nv - ov) <= ARITH_MAX) return 1; + + } + + /* Finally, let's do the same thing for dwords. */ + + if (blen == 4) { + + if ((u32)(old_val - new_val) <= ARITH_MAX || + (u32)(new_val - old_val) <= ARITH_MAX) return 1; + + new_val = SWAP32(new_val); + old_val = SWAP32(old_val); + + if ((u32)(old_val - new_val) <= ARITH_MAX || + (u32)(new_val - old_val) <= ARITH_MAX) return 1; + + } + + return 0; + +} + + +/* Last but not least, a similar helper to see if insertion of an + interesting integer is redundant given the insertions done for + shorter blen. The last param (check_le) is set if the caller + already executed LE insertion for current blen and wants to see + if BE variant passed in new_val is unique. */ + +static u8 could_be_interest(u32 old_val, u32 new_val, u8 blen, u8 check_le) { + + u32 i, j; + + if (old_val == new_val) return 1; + + /* See if one-byte insertions from interesting_8 over old_val could + produce new_val. */ + + for (i = 0; i < blen; i++) { + + for (j = 0; j < sizeof(interesting_8); j++) { + + u32 tval = (old_val & ~(0xff << (i * 8))) | + (((u8)interesting_8[j]) << (i * 8)); + + if (new_val == tval) return 1; + + } + + } + + /* Bail out unless we're also asked to examine two-byte LE insertions + as a preparation for BE attempts. */ + + if (blen == 2 && !check_le) return 0; + + /* See if two-byte insertions over old_val could give us new_val. */ + + for (i = 0; i < blen - 1; i++) { + + for (j = 0; j < sizeof(interesting_16) / 2; j++) { + + u32 tval = (old_val & ~(0xffff << (i * 8))) | + (((u16)interesting_16[j]) << (i * 8)); + + if (new_val == tval) return 1; + + /* Continue here only if blen > 2. */ + + if (blen > 2) { + + tval = (old_val & ~(0xffff << (i * 8))) | + (SWAP16(interesting_16[j]) << (i * 8)); + + if (new_val == tval) return 1; + + } + + } + + } + + if (blen == 4 && check_le) { + + /* See if four-byte insertions could produce the same result + (LE only). */ + + for (j = 0; j < sizeof(interesting_32) / 4; j++) + if (new_val == (u32)interesting_32[j]) return 1; + + } + + return 0; + +} + + +/* Take the current entry from the queue, fuzz it for a while. This + function is a tad too long... returns 0 if fuzzed successfully, 1 if + skipped or bailed out. */ + +// 执行一次模糊测试的函数。它接受一个测试用例，应用各种变异技术来生成新的测试用例，然后执行目标程序来检查新测试用例的效果。 +static u8 fuzz_one(char** argv) { + + s32 len, fd, temp_len, i, j; + u8 *in_buf, *out_buf, *orig_in, *ex_tmp, *eff_map = 0; + u64 havoc_queued, orig_hit_cnt, new_hit_cnt; + u32 splice_cycle = 0, perf_score = 100, orig_perf, prev_cksum, eff_cnt = 1; + + u8 ret_val = 1, doing_det = 0; + + u8 a_collect[MAX_AUTO_EXTRA]; + u32 a_len = 0; + +#ifdef IGNORE_FINDS + + /* In IGNORE_FINDS mode, skip any entries that weren't in the + initial data set. */ + + if (queue_cur->depth > 1) return 1; + +#else + + if (pending_favored) { + + /* If we have any favored, non-fuzzed new arrivals in the queue, + possibly skip to them at the expense of already-fuzzed or non-favored + cases. */ + + if ((queue_cur->was_fuzzed || !queue_cur->favored) && + UR(100) < SKIP_TO_NEW_PROB) return 1; + + } else if (!dumb_mode && !queue_cur->favored && queued_paths > 10) { + + /* Otherwise, still possibly skip non-favored cases, albeit less often. + The odds of skipping stuff are higher for already-fuzzed inputs and + lower for never-fuzzed entries. */ + + if (queue_cycle > 1 && !queue_cur->was_fuzzed) { + + if (UR(100) < SKIP_NFAV_NEW_PROB) return 1; + + } else { + + if (UR(100) < SKIP_NFAV_OLD_PROB) return 1; + + } + + } + +#endif /* ^IGNORE_FINDS */ + + if (not_on_tty) { + ACTF("Fuzzing test case #%u (%u total, %llu uniq crashes found)...", + current_entry, queued_paths, unique_crashes); + fflush(stdout); + } + + /* Map the test case into memory. */ + + fd = open(queue_cur->fname, O_RDONLY); + + if (fd < 0) PFATAL("Unable to open '%s'", queue_cur->fname); + + len = queue_cur->len; + + orig_in = in_buf = mmap(0, len, PROT_READ | PROT_WRITE, MAP_PRIVATE, fd, 0); + + if (orig_in == MAP_FAILED) PFATAL("Unable to mmap '%s'", queue_cur->fname); + + close(fd); + + /* We could mmap() out_buf as MAP_PRIVATE, but we end up clobbering every + single byte anyway, so it wouldn't give us any performance or memory usage + benefits. */ + + out_buf = ck_alloc_nozero(len); + + subseq_tmouts = 0; + + cur_depth = queue_cur->depth; + + /******************************************* + * CALIBRATION (only if failed earlier on) * + *******************************************/ + + if (queue_cur->cal_failed) { + + u8 res = FAULT_TMOUT; + + if (queue_cur->cal_failed < CAL_CHANCES) { + + /* Reset exec_cksum to tell calibrate_case to re-execute the testcase + avoiding the usage of an invalid trace_bits. + For more info: https://github.com/AFLplusplus/AFLplusplus/pull/425 */ + + queue_cur->exec_cksum = 0; + + res = calibrate_case(argv, queue_cur, in_buf, queue_cycle - 1, 0); + + if (res == FAULT_ERROR) + FATAL("Unable to execute target application"); + + } + + if (stop_soon || res != crash_mode) { + cur_skipped_paths++; + goto abandon_entry; + } + + } + + /************ + * TRIMMING * + ************/ + + if (!dumb_mode && !queue_cur->trim_done) { + + u8 res = trim_case(argv, queue_cur, in_buf); + + if (res == FAULT_ERROR) + FATAL("Unable to execute target application"); + + if (stop_soon) { + cur_skipped_paths++; + goto abandon_entry; + } + + /* Don't retry trimming, even if it failed. */ + + queue_cur->trim_done = 1; + + if (len != queue_cur->len) len = queue_cur->len; + + } + + memcpy(out_buf, in_buf, len); + + /********************* + * PERFORMANCE SCORE * + *********************/ + + orig_perf = perf_score = calculate_score(queue_cur); + + /* Skip right away if -d is given, if we have done deterministic fuzzing on + this entry ourselves (was_fuzzed), or if it has gone through deterministic + testing in earlier, resumed runs (passed_det). */ + + if (skip_deterministic || queue_cur->was_fuzzed || queue_cur->passed_det) + goto havoc_stage; + + /* Skip deterministic fuzzing if exec path checksum puts this out of scope + for this master instance. */ + + if (master_max && (queue_cur->exec_cksum % master_max) != master_id - 1) + goto havoc_stage; + + doing_det = 1; + + /********************************************* + * SIMPLE BITFLIP (+dictionary construction) * + *********************************************/ + +#define FLIP_BIT(_ar, _b) do { \ + u8* _arf = (u8*)(_ar); \ + u32 _bf = (_b); \ + _arf[(_bf) >> 3] ^= (128 >> ((_bf) & 7)); \ + } while (0) + + /* Single walking bit. */ + + stage_short = "flip1"; + stage_max = len << 3; + stage_name = "bitflip 1/1"; + + stage_val_type = STAGE_VAL_NONE; + + orig_hit_cnt = queued_paths + unique_crashes; + + prev_cksum = queue_cur->exec_cksum; + + for (stage_cur = 0; stage_cur < stage_max; stage_cur++) { + + stage_cur_byte = stage_cur >> 3; + + FLIP_BIT(out_buf, stage_cur); + + if (common_fuzz_stuff(argv, out_buf, len)) goto abandon_entry; + + FLIP_BIT(out_buf, stage_cur); + + /* While flipping the least significant bit in every byte, pull of an extra + trick to detect possible syntax tokens. In essence, the idea is that if + you have a binary blob like this: + + xxxxxxxxIHDRxxxxxxxx + + ...and changing the leading and trailing bytes causes variable or no + changes in program flow, but touching any character in the "IHDR" string + always produces the same, distinctive path, it's highly likely that + "IHDR" is an atomically-checked magic value of special significance to + the fuzzed format. + + We do this here, rather than as a separate stage, because it's a nice + way to keep the operation approximately "free" (i.e., no extra execs). + + Empirically, performing the check when flipping the least significant bit + is advantageous, compared to doing it at the time of more disruptive + changes, where the program flow may be affected in more violent ways. + + The caveat is that we won't generate dictionaries in the -d mode or -S + mode - but that's probably a fair trade-off. + + This won't work particularly well with paths that exhibit variable + behavior, but fails gracefully, so we'll carry out the checks anyway. + + */ + + if (!dumb_mode && (stage_cur & 7) == 7) { + + u32 cksum = hash32(trace_bits, MAP_SIZE, HASH_CONST); + + if (stage_cur == stage_max - 1 && cksum == prev_cksum) { + + /* If at end of file and we are still collecting a string, grab the + final character and force output. */ + + if (a_len < MAX_AUTO_EXTRA) a_collect[a_len] = out_buf[stage_cur >> 3]; + a_len++; + + if (a_len >= MIN_AUTO_EXTRA && a_len <= MAX_AUTO_EXTRA) + maybe_add_auto(a_collect, a_len); + + } else if (cksum != prev_cksum) { + + /* Otherwise, if the checksum has changed, see if we have something + worthwhile queued up, and collect that if the answer is yes. */ + + if (a_len >= MIN_AUTO_EXTRA && a_len <= MAX_AUTO_EXTRA) + maybe_add_auto(a_collect, a_len); + + a_len = 0; + prev_cksum = cksum; + + } + + /* Continue collecting string, but only if the bit flip actually made + any difference - we don't want no-op tokens. */ + + if (cksum != queue_cur->exec_cksum) { + + if (a_len < MAX_AUTO_EXTRA) a_collect[a_len] = out_buf[stage_cur >> 3]; + a_len++; + + } + + } + + } + + new_hit_cnt = queued_paths + unique_crashes; + + stage_finds[STAGE_FLIP1] += new_hit_cnt - orig_hit_cnt; + stage_cycles[STAGE_FLIP1] += stage_max; + + /* Two walking bits. */ + + stage_name = "bitflip 2/1"; + stage_short = "flip2"; + stage_max = (len << 3) - 1; + + orig_hit_cnt = new_hit_cnt; + + for (stage_cur = 0; stage_cur < stage_max; stage_cur++) { + + stage_cur_byte = stage_cur >> 3; + + FLIP_BIT(out_buf, stage_cur); + FLIP_BIT(out_buf, stage_cur + 1); + + if (common_fuzz_stuff(argv, out_buf, len)) goto abandon_entry; + + FLIP_BIT(out_buf, stage_cur); + FLIP_BIT(out_buf, stage_cur + 1); + + } + + new_hit_cnt = queued_paths + unique_crashes; + + stage_finds[STAGE_FLIP2] += new_hit_cnt - orig_hit_cnt; + stage_cycles[STAGE_FLIP2] += stage_max; + + /* Four walking bits. */ + + stage_name = "bitflip 4/1"; + stage_short = "flip4"; + stage_max = (len << 3) - 3; + + orig_hit_cnt = new_hit_cnt; + + for (stage_cur = 0; stage_cur < stage_max; stage_cur++) { + + stage_cur_byte = stage_cur >> 3; + + FLIP_BIT(out_buf, stage_cur); + FLIP_BIT(out_buf, stage_cur + 1); + FLIP_BIT(out_buf, stage_cur + 2); + FLIP_BIT(out_buf, stage_cur + 3); + + if (common_fuzz_stuff(argv, out_buf, len)) goto abandon_entry; + + FLIP_BIT(out_buf, stage_cur); + FLIP_BIT(out_buf, stage_cur + 1); + FLIP_BIT(out_buf, stage_cur + 2); + FLIP_BIT(out_buf, stage_cur + 3); + + } + + new_hit_cnt = queued_paths + unique_crashes; + + stage_finds[STAGE_FLIP4] += new_hit_cnt - orig_hit_cnt; + stage_cycles[STAGE_FLIP4] += stage_max; + + /* Effector map setup. These macros calculate: + + EFF_APOS - position of a particular file offset in the map. + EFF_ALEN - length of a map with a particular number of bytes. + EFF_SPAN_ALEN - map span for a sequence of bytes. + + */ + +#define EFF_APOS(_p) ((_p) >> EFF_MAP_SCALE2) +#define EFF_REM(_x) ((_x) & ((1 << EFF_MAP_SCALE2) - 1)) +#define EFF_ALEN(_l) (EFF_APOS(_l) + !!EFF_REM(_l)) +#define EFF_SPAN_ALEN(_p, _l) (EFF_APOS((_p) + (_l) - 1) - EFF_APOS(_p) + 1) + + /* Initialize effector map for the next step (see comments below). Always + flag first and last byte as doing something. */ + + eff_map = ck_alloc(EFF_ALEN(len)); + eff_map[0] = 1; + + if (EFF_APOS(len - 1) != 0) { + eff_map[EFF_APOS(len - 1)] = 1; + eff_cnt++; + } + + /* Walking byte. */ + + stage_name = "bitflip 8/8"; + stage_short = "flip8"; + stage_max = len; + + orig_hit_cnt = new_hit_cnt; + + for (stage_cur = 0; stage_cur < stage_max; stage_cur++) { + + stage_cur_byte = stage_cur; + + out_buf[stage_cur] ^= 0xFF; + + if (common_fuzz_stuff(argv, out_buf, len)) goto abandon_entry; + + /* We also use this stage to pull off a simple trick: we identify + bytes that seem to have no effect on the current execution path + even when fully flipped - and we skip them during more expensive + deterministic stages, such as arithmetics or known ints. */ + + if (!eff_map[EFF_APOS(stage_cur)]) { + + u32 cksum; + + /* If in dumb mode or if the file is very short, just flag everything + without wasting time on checksums. */ + + if (!dumb_mode && len >= EFF_MIN_LEN) + cksum = hash32(trace_bits, MAP_SIZE, HASH_CONST); + else + cksum = ~queue_cur->exec_cksum; + + if (cksum != queue_cur->exec_cksum) { + eff_map[EFF_APOS(stage_cur)] = 1; + eff_cnt++; + } + + } + + out_buf[stage_cur] ^= 0xFF; + + } + + /* If the effector map is more than EFF_MAX_PERC dense, just flag the + whole thing as worth fuzzing, since we wouldn't be saving much time + anyway. */ + + if (eff_cnt != EFF_ALEN(len) && + eff_cnt * 100 / EFF_ALEN(len) > EFF_MAX_PERC) { + + memset(eff_map, 1, EFF_ALEN(len)); + + blocks_eff_select += EFF_ALEN(len); + + } else { + + blocks_eff_select += eff_cnt; + + } + + blocks_eff_total += EFF_ALEN(len); + + new_hit_cnt = queued_paths + unique_crashes; + + stage_finds[STAGE_FLIP8] += new_hit_cnt - orig_hit_cnt; + stage_cycles[STAGE_FLIP8] += stage_max; + + /* Two walking bytes. */ + + if (len < 2) goto skip_bitflip; + + stage_name = "bitflip 16/8"; + stage_short = "flip16"; + stage_cur = 0; + stage_max = len - 1; + + orig_hit_cnt = new_hit_cnt; + + for (i = 0; i < len - 1; i++) { + + /* Let's consult the effector map... */ + + if (!eff_map[EFF_APOS(i)] && !eff_map[EFF_APOS(i + 1)]) { + stage_max--; + continue; + } + + stage_cur_byte = i; + + *(u16*)(out_buf + i) ^= 0xFFFF; + + if (common_fuzz_stuff(argv, out_buf, len)) goto abandon_entry; + stage_cur++; + + *(u16*)(out_buf + i) ^= 0xFFFF; + + + } + + new_hit_cnt = queued_paths + unique_crashes; + + stage_finds[STAGE_FLIP16] += new_hit_cnt - orig_hit_cnt; + stage_cycles[STAGE_FLIP16] += stage_max; + + if (len < 4) goto skip_bitflip; + + /* Four walking bytes. */ + + stage_name = "bitflip 32/8"; + stage_short = "flip32"; + stage_cur = 0; + stage_max = len - 3; + + orig_hit_cnt = new_hit_cnt; + + for (i = 0; i < len - 3; i++) { + + /* Let's consult the effector map... */ + if (!eff_map[EFF_APOS(i)] && !eff_map[EFF_APOS(i + 1)] && + !eff_map[EFF_APOS(i + 2)] && !eff_map[EFF_APOS(i + 3)]) { + stage_max--; + continue; + } + + stage_cur_byte = i; + + *(u32*)(out_buf + i) ^= 0xFFFFFFFF; + + if (common_fuzz_stuff(argv, out_buf, len)) goto abandon_entry; + stage_cur++; + + *(u32*)(out_buf + i) ^= 0xFFFFFFFF; + + } + + new_hit_cnt = queued_paths + unique_crashes; + + stage_finds[STAGE_FLIP32] += new_hit_cnt - orig_hit_cnt; + stage_cycles[STAGE_FLIP32] += stage_max; + +skip_bitflip: + + if (no_arith) goto skip_arith; + + /********************** + * ARITHMETIC INC/DEC * + **********************/ + + /* 8-bit arithmetics. */ + + stage_name = "arith 8/8"; + stage_short = "arith8"; + stage_cur = 0; + stage_max = 2 * len * ARITH_MAX; + + stage_val_type = STAGE_VAL_LE; + + orig_hit_cnt = new_hit_cnt; + + for (i = 0; i < len; i++) { + + u8 orig = out_buf[i]; + + /* Let's consult the effector map... */ + + if (!eff_map[EFF_APOS(i)]) { + stage_max -= 2 * ARITH_MAX; + continue; + } + + stage_cur_byte = i; + + for (j = 1; j <= ARITH_MAX; j++) { + + u8 r = orig ^ (orig + j); + + /* Do arithmetic operations only if the result couldn't be a product + of a bitflip. */ + + if (!could_be_bitflip(r)) { + + stage_cur_val = j; + out_buf[i] = orig + j; + + if (common_fuzz_stuff(argv, out_buf, len)) goto abandon_entry; + stage_cur++; + + } else stage_max--; + + r = orig ^ (orig - j); + + if (!could_be_bitflip(r)) { + + stage_cur_val = -j; + out_buf[i] = orig - j; + + if (common_fuzz_stuff(argv, out_buf, len)) goto abandon_entry; + stage_cur++; + + } else stage_max--; + + out_buf[i] = orig; + + } + + } + + new_hit_cnt = queued_paths + unique_crashes; + + stage_finds[STAGE_ARITH8] += new_hit_cnt - orig_hit_cnt; + stage_cycles[STAGE_ARITH8] += stage_max; + + /* 16-bit arithmetics, both endians. */ + + if (len < 2) goto skip_arith; + + stage_name = "arith 16/8"; + stage_short = "arith16"; + stage_cur = 0; + stage_max = 4 * (len - 1) * ARITH_MAX; + + orig_hit_cnt = new_hit_cnt; + + for (i = 0; i < len - 1; i++) { + + u16 orig = *(u16*)(out_buf + i); + + /* Let's consult the effector map... */ + + if (!eff_map[EFF_APOS(i)] && !eff_map[EFF_APOS(i + 1)]) { + stage_max -= 4 * ARITH_MAX; + continue; + } + + stage_cur_byte = i; + + for (j = 1; j <= ARITH_MAX; j++) { + + u16 r1 = orig ^ (orig + j), + r2 = orig ^ (orig - j), + r3 = orig ^ SWAP16(SWAP16(orig) + j), + r4 = orig ^ SWAP16(SWAP16(orig) - j); + + /* Try little endian addition and subtraction first. Do it only + if the operation would affect more than one byte (hence the + & 0xff overflow checks) and if it couldn't be a product of + a bitflip. */ + + stage_val_type = STAGE_VAL_LE; + + if ((orig & 0xff) + j > 0xff && !could_be_bitflip(r1)) { + + stage_cur_val = j; + *(u16*)(out_buf + i) = orig + j; + + if (common_fuzz_stuff(argv, out_buf, len)) goto abandon_entry; + stage_cur++; + + } else stage_max--; + + if ((orig & 0xff) < j && !could_be_bitflip(r2)) { + + stage_cur_val = -j; + *(u16*)(out_buf + i) = orig - j; + + if (common_fuzz_stuff(argv, out_buf, len)) goto abandon_entry; + stage_cur++; + + } else stage_max--; + + /* Big endian comes next. Same deal. */ + + stage_val_type = STAGE_VAL_BE; + + + if ((orig >> 8) + j > 0xff && !could_be_bitflip(r3)) { + + stage_cur_val = j; + *(u16*)(out_buf + i) = SWAP16(SWAP16(orig) + j); + + if (common_fuzz_stuff(argv, out_buf, len)) goto abandon_entry; + stage_cur++; + + } else stage_max--; + + if ((orig >> 8) < j && !could_be_bitflip(r4)) { + + stage_cur_val = -j; + *(u16*)(out_buf + i) = SWAP16(SWAP16(orig) - j); + + if (common_fuzz_stuff(argv, out_buf, len)) goto abandon_entry; + stage_cur++; + + } else stage_max--; + + *(u16*)(out_buf + i) = orig; + + } + + } + + new_hit_cnt = queued_paths + unique_crashes; + + stage_finds[STAGE_ARITH16] += new_hit_cnt - orig_hit_cnt; + stage_cycles[STAGE_ARITH16] += stage_max; + + /* 32-bit arithmetics, both endians. */ + + if (len < 4) goto skip_arith; + + stage_name = "arith 32/8"; + stage_short = "arith32"; + stage_cur = 0; + stage_max = 4 * (len - 3) * ARITH_MAX; + + orig_hit_cnt = new_hit_cnt; + + for (i = 0; i < len - 3; i++) { + + u32 orig = *(u32*)(out_buf + i); + + /* Let's consult the effector map... */ + + if (!eff_map[EFF_APOS(i)] && !eff_map[EFF_APOS(i + 1)] && + !eff_map[EFF_APOS(i + 2)] && !eff_map[EFF_APOS(i + 3)]) { + stage_max -= 4 * ARITH_MAX; + continue; + } + + stage_cur_byte = i; + + for (j = 1; j <= ARITH_MAX; j++) { + + u32 r1 = orig ^ (orig + j), + r2 = orig ^ (orig - j), + r3 = orig ^ SWAP32(SWAP32(orig) + j), + r4 = orig ^ SWAP32(SWAP32(orig) - j); + + /* Little endian first. Same deal as with 16-bit: we only want to + try if the operation would have effect on more than two bytes. */ + + stage_val_type = STAGE_VAL_LE; + + if ((orig & 0xffff) + j > 0xffff && !could_be_bitflip(r1)) { + + stage_cur_val = j; + *(u32*)(out_buf + i) = orig + j; + + if (common_fuzz_stuff(argv, out_buf, len)) goto abandon_entry; + stage_cur++; + + } else stage_max--; + + if ((orig & 0xffff) < j && !could_be_bitflip(r2)) { + + stage_cur_val = -j; + *(u32*)(out_buf + i) = orig - j; + + if (common_fuzz_stuff(argv, out_buf, len)) goto abandon_entry; + stage_cur++; + + } else stage_max--; + + /* Big endian next. */ + + stage_val_type = STAGE_VAL_BE; + + if ((SWAP32(orig) & 0xffff) + j > 0xffff && !could_be_bitflip(r3)) { + + stage_cur_val = j; + *(u32*)(out_buf + i) = SWAP32(SWAP32(orig) + j); + + if (common_fuzz_stuff(argv, out_buf, len)) goto abandon_entry; + stage_cur++; + + } else stage_max--; + + if ((SWAP32(orig) & 0xffff) < j && !could_be_bitflip(r4)) { + + stage_cur_val = -j; + *(u32*)(out_buf + i) = SWAP32(SWAP32(orig) - j); + + if (common_fuzz_stuff(argv, out_buf, len)) goto abandon_entry; + stage_cur++; + + } else stage_max--; + + *(u32*)(out_buf + i) = orig; + + } + + } + + new_hit_cnt = queued_paths + unique_crashes; + + stage_finds[STAGE_ARITH32] += new_hit_cnt - orig_hit_cnt; + stage_cycles[STAGE_ARITH32] += stage_max; + +skip_arith: + + /********************** + * INTERESTING VALUES * + **********************/ + + stage_name = "interest 8/8"; + stage_short = "int8"; + stage_cur = 0; + stage_max = len * sizeof(interesting_8); + + stage_val_type = STAGE_VAL_LE; + + orig_hit_cnt = new_hit_cnt; + + /* Setting 8-bit integers. */ + + for (i = 0; i < len; i++) { + + u8 orig = out_buf[i]; + + /* Let's consult the effector map... */ + + if (!eff_map[EFF_APOS(i)]) { + stage_max -= sizeof(interesting_8); + continue; + } + + stage_cur_byte = i; + + for (j = 0; j < sizeof(interesting_8); j++) { + + /* Skip if the value could be a product of bitflips or arithmetics. */ + + if (could_be_bitflip(orig ^ (u8)interesting_8[j]) || + could_be_arith(orig, (u8)interesting_8[j], 1)) { + stage_max--; + continue; + } + + stage_cur_val = interesting_8[j]; + out_buf[i] = interesting_8[j]; + + if (common_fuzz_stuff(argv, out_buf, len)) goto abandon_entry; + + out_buf[i] = orig; + stage_cur++; + + } + + } + + new_hit_cnt = queued_paths + unique_crashes; + + stage_finds[STAGE_INTEREST8] += new_hit_cnt - orig_hit_cnt; + stage_cycles[STAGE_INTEREST8] += stage_max; + + /* Setting 16-bit integers, both endians. */ + + if (no_arith || len < 2) goto skip_interest; + + stage_name = "interest 16/8"; + stage_short = "int16"; + stage_cur = 0; + stage_max = 2 * (len - 1) * (sizeof(interesting_16) >> 1); + + orig_hit_cnt = new_hit_cnt; + + for (i = 0; i < len - 1; i++) { + + u16 orig = *(u16*)(out_buf + i); + + /* Let's consult the effector map... */ + + if (!eff_map[EFF_APOS(i)] && !eff_map[EFF_APOS(i + 1)]) { + stage_max -= sizeof(interesting_16); + continue; + } + + stage_cur_byte = i; + + for (j = 0; j < sizeof(interesting_16) / 2; j++) { + + stage_cur_val = interesting_16[j]; + + /* Skip if this could be a product of a bitflip, arithmetics, + or single-byte interesting value insertion. */ + + if (!could_be_bitflip(orig ^ (u16)interesting_16[j]) && + !could_be_arith(orig, (u16)interesting_16[j], 2) && + !could_be_interest(orig, (u16)interesting_16[j], 2, 0)) { + + stage_val_type = STAGE_VAL_LE; + + *(u16*)(out_buf + i) = interesting_16[j]; + + if (common_fuzz_stuff(argv, out_buf, len)) goto abandon_entry; + stage_cur++; + + } else stage_max--; + + if ((u16)interesting_16[j] != SWAP16(interesting_16[j]) && + !could_be_bitflip(orig ^ SWAP16(interesting_16[j])) && + !could_be_arith(orig, SWAP16(interesting_16[j]), 2) && + !could_be_interest(orig, SWAP16(interesting_16[j]), 2, 1)) { + + stage_val_type = STAGE_VAL_BE; + + *(u16*)(out_buf + i) = SWAP16(interesting_16[j]); + if (common_fuzz_stuff(argv, out_buf, len)) goto abandon_entry; + stage_cur++; + + } else stage_max--; + + } + + *(u16*)(out_buf + i) = orig; + + } + + new_hit_cnt = queued_paths + unique_crashes; + + stage_finds[STAGE_INTEREST16] += new_hit_cnt - orig_hit_cnt; + stage_cycles[STAGE_INTEREST16] += stage_max; + + if (len < 4) goto skip_interest; + + /* Setting 32-bit integers, both endians. */ + + stage_name = "interest 32/8"; + stage_short = "int32"; + stage_cur = 0; + stage_max = 2 * (len - 3) * (sizeof(interesting_32) >> 2); + + orig_hit_cnt = new_hit_cnt; + + for (i = 0; i < len - 3; i++) { + + u32 orig = *(u32*)(out_buf + i); + + /* Let's consult the effector map... */ + + if (!eff_map[EFF_APOS(i)] && !eff_map[EFF_APOS(i + 1)] && + !eff_map[EFF_APOS(i + 2)] && !eff_map[EFF_APOS(i + 3)]) { + stage_max -= sizeof(interesting_32) >> 1; + continue; + } + + stage_cur_byte = i; + + for (j = 0; j < sizeof(interesting_32) / 4; j++) { + + stage_cur_val = interesting_32[j]; + + /* Skip if this could be a product of a bitflip, arithmetics, + or word interesting value insertion. */ + + if (!could_be_bitflip(orig ^ (u32)interesting_32[j]) && + !could_be_arith(orig, interesting_32[j], 4) && + !could_be_interest(orig, interesting_32[j], 4, 0)) { + + stage_val_type = STAGE_VAL_LE; + + *(u32*)(out_buf + i) = interesting_32[j]; + + if (common_fuzz_stuff(argv, out_buf, len)) goto abandon_entry; + stage_cur++; + + } else stage_max--; + + if ((u32)interesting_32[j] != SWAP32(interesting_32[j]) && + !could_be_bitflip(orig ^ SWAP32(interesting_32[j])) && + !could_be_arith(orig, SWAP32(interesting_32[j]), 4) && + !could_be_interest(orig, SWAP32(interesting_32[j]), 4, 1)) { + + stage_val_type = STAGE_VAL_BE; + + *(u32*)(out_buf + i) = SWAP32(interesting_32[j]); + if (common_fuzz_stuff(argv, out_buf, len)) goto abandon_entry; + stage_cur++; + + } else stage_max--; + + } + + *(u32*)(out_buf + i) = orig; + + } + + new_hit_cnt = queued_paths + unique_crashes; + + stage_finds[STAGE_INTEREST32] += new_hit_cnt - orig_hit_cnt; + stage_cycles[STAGE_INTEREST32] += stage_max; + +skip_interest: + + /******************** + * DICTIONARY STUFF * + ********************/ + + if (!extras_cnt) goto skip_user_extras; + + /* Overwrite with user-supplied extras. */ + + stage_name = "user extras (over)"; + stage_short = "ext_UO"; + stage_cur = 0; + stage_max = extras_cnt * len; + + stage_val_type = STAGE_VAL_NONE; + + orig_hit_cnt = new_hit_cnt; + + for (i = 0; i < len; i++) { + + u32 last_len = 0; + + stage_cur_byte = i; + + /* Extras are sorted by size, from smallest to largest. This means + that we don't have to worry about restoring the buffer in + between writes at a particular offset determined by the outer + loop. */ + + for (j = 0; j < extras_cnt; j++) { + + /* Skip extras probabilistically if extras_cnt > MAX_DET_EXTRAS. Also + skip them if there's no room to insert the payload, if the token + is redundant, or if its entire span has no bytes set in the effector + map. */ + + if ((extras_cnt > MAX_DET_EXTRAS && UR(extras_cnt) >= MAX_DET_EXTRAS) || + extras[j].len > len - i || + !memcmp(extras[j].data, out_buf + i, extras[j].len) || + !memchr(eff_map + EFF_APOS(i), 1, EFF_SPAN_ALEN(i, extras[j].len))) { + + stage_max--; + continue; + + } + + last_len = extras[j].len; + memcpy(out_buf + i, extras[j].data, last_len); + + if (common_fuzz_stuff(argv, out_buf, len)) goto abandon_entry; + + stage_cur++; + + } + + /* Restore all the clobbered memory. */ + memcpy(out_buf + i, in_buf + i, last_len); + + } + + new_hit_cnt = queued_paths + unique_crashes; + + stage_finds[STAGE_EXTRAS_UO] += new_hit_cnt - orig_hit_cnt; + stage_cycles[STAGE_EXTRAS_UO] += stage_max; + + /* Insertion of user-supplied extras. */ + + stage_name = "user extras (insert)"; + stage_short = "ext_UI"; + stage_cur = 0; + stage_max = extras_cnt * (len + 1); + + orig_hit_cnt = new_hit_cnt; + + ex_tmp = ck_alloc(len + MAX_DICT_FILE); + + for (i = 0; i <= len; i++) { + + stage_cur_byte = i; + + for (j = 0; j < extras_cnt; j++) { + + if (len + extras[j].len > MAX_FILE) { + stage_max--; + continue; + } + + /* Insert token */ + memcpy(ex_tmp + i, extras[j].data, extras[j].len); + + /* Copy tail */ + memcpy(ex_tmp + i + extras[j].len, out_buf + i, len - i); + + if (common_fuzz_stuff(argv, ex_tmp, len + extras[j].len)) { + ck_free(ex_tmp); + goto abandon_entry; + } + + stage_cur++; + + } + + /* Copy head */ + ex_tmp[i] = out_buf[i]; + + } + + ck_free(ex_tmp); + + new_hit_cnt = queued_paths + unique_crashes; + + stage_finds[STAGE_EXTRAS_UI] += new_hit_cnt - orig_hit_cnt; + stage_cycles[STAGE_EXTRAS_UI] += stage_max; + +skip_user_extras: + + if (!a_extras_cnt) goto skip_extras; + + stage_name = "auto extras (over)"; + stage_short = "ext_AO"; + stage_cur = 0; + stage_max = MIN(a_extras_cnt, USE_AUTO_EXTRAS) * len; + + stage_val_type = STAGE_VAL_NONE; + + orig_hit_cnt = new_hit_cnt; + + for (i = 0; i < len; i++) { + + u32 last_len = 0; + + stage_cur_byte = i; + + for (j = 0; j < MIN(a_extras_cnt, USE_AUTO_EXTRAS); j++) { + + /* See the comment in the earlier code; extras are sorted by size. */ + + if (a_extras[j].len > len - i || + !memcmp(a_extras[j].data, out_buf + i, a_extras[j].len) || + !memchr(eff_map + EFF_APOS(i), 1, EFF_SPAN_ALEN(i, a_extras[j].len))) { + + stage_max--; + continue; + + } + + last_len = a_extras[j].len; + memcpy(out_buf + i, a_extras[j].data, last_len); + + if (common_fuzz_stuff(argv, out_buf, len)) goto abandon_entry; + + stage_cur++; + + } + + /* Restore all the clobbered memory. */ + memcpy(out_buf + i, in_buf + i, last_len); + + } + + new_hit_cnt = queued_paths + unique_crashes; + + stage_finds[STAGE_EXTRAS_AO] += new_hit_cnt - orig_hit_cnt; + stage_cycles[STAGE_EXTRAS_AO] += stage_max; + +skip_extras: + + /* If we made this to here without jumping to havoc_stage or abandon_entry, + we're properly done with deterministic steps and can mark it as such + in the .state/ directory. */ + + if (!queue_cur->passed_det) mark_as_det_done(queue_cur); + + /**************** + * RANDOM HAVOC * + ****************/ + +havoc_stage: + + stage_cur_byte = -1; + + /* The havoc stage mutation code is also invoked when splicing files; if the + splice_cycle variable is set, generate different descriptions and such. */ + + if (!splice_cycle) { + + stage_name = "havoc"; + stage_short = "havoc"; + stage_max = (doing_det ? HAVOC_CYCLES_INIT : HAVOC_CYCLES) * + perf_score / havoc_div / 100; + + } else { + + static u8 tmp[32]; + + perf_score = orig_perf; + + sprintf(tmp, "splice %u", splice_cycle); + stage_name = tmp; + stage_short = "splice"; + stage_max = SPLICE_HAVOC * perf_score / havoc_div / 100; + + } + + if (stage_max < HAVOC_MIN) stage_max = HAVOC_MIN; + + temp_len = len; + + orig_hit_cnt = queued_paths + unique_crashes; + + havoc_queued = queued_paths; + + /* We essentially just do several thousand runs (depending on perf_score) + where we take the input file and make random stacked tweaks. */ + + for (stage_cur = 0; stage_cur < stage_max; stage_cur++) { + + u32 use_stacking = 1 << (1 + UR(HAVOC_STACK_POW2)); + + stage_cur_val = use_stacking; + + for (i = 0; i < use_stacking; i++) { + + switch (UR(15 + ((extras_cnt + a_extras_cnt) ? 2 : 0))) { + + case 0: + + /* Flip a single bit somewhere. Spooky! */ + + FLIP_BIT(out_buf, UR(temp_len << 3)); + break; + + case 1: + + /* Set byte to interesting value. */ + + out_buf[UR(temp_len)] = interesting_8[UR(sizeof(interesting_8))]; + break; + + case 2: + + /* Set word to interesting value, randomly choosing endian. */ + + if (temp_len < 2) break; + + if (UR(2)) { + + *(u16*)(out_buf + UR(temp_len - 1)) = + interesting_16[UR(sizeof(interesting_16) >> 1)]; + + } else { + + *(u16*)(out_buf + UR(temp_len - 1)) = SWAP16( + interesting_16[UR(sizeof(interesting_16) >> 1)]); + + } + + break; + + case 3: + + /* Set dword to interesting value, randomly choosing endian. */ + + if (temp_len < 4) break; + + if (UR(2)) { + + *(u32*)(out_buf + UR(temp_len - 3)) = + interesting_32[UR(sizeof(interesting_32) >> 2)]; + + } else { + + *(u32*)(out_buf + UR(temp_len - 3)) = SWAP32( + interesting_32[UR(sizeof(interesting_32) >> 2)]); + + } + + break; + + case 4: + + /* Randomly subtract from byte. */ + + out_buf[UR(temp_len)] -= 1 + UR(ARITH_MAX); + break; + + case 5: + + /* Randomly add to byte. */ + + out_buf[UR(temp_len)] += 1 + UR(ARITH_MAX); + break; + + case 6: + + /* Randomly subtract from word, random endian. */ + + if (temp_len < 2) break; + + if (UR(2)) { + + u32 pos = UR(temp_len - 1); + + *(u16*)(out_buf + pos) -= 1 + UR(ARITH_MAX); + + } else { + + u32 pos = UR(temp_len - 1); + u16 num = 1 + UR(ARITH_MAX); + + *(u16*)(out_buf + pos) = + SWAP16(SWAP16(*(u16*)(out_buf + pos)) - num); + + } + + break; + + case 7: + + /* Randomly add to word, random endian. */ + + if (temp_len < 2) break; + + if (UR(2)) { + + u32 pos = UR(temp_len - 1); + + *(u16*)(out_buf + pos) += 1 + UR(ARITH_MAX); + + } else { + + u32 pos = UR(temp_len - 1); + u16 num = 1 + UR(ARITH_MAX); + + *(u16*)(out_buf + pos) = + SWAP16(SWAP16(*(u16*)(out_buf + pos)) + num); + + } + + break; + + case 8: + + /* Randomly subtract from dword, random endian. */ + + if (temp_len < 4) break; + + if (UR(2)) { + + u32 pos = UR(temp_len - 3); + + *(u32*)(out_buf + pos) -= 1 + UR(ARITH_MAX); + + } else { + + u32 pos = UR(temp_len - 3); + u32 num = 1 + UR(ARITH_MAX); + + *(u32*)(out_buf + pos) = + SWAP32(SWAP32(*(u32*)(out_buf + pos)) - num); + + } + + break; + + case 9: + + /* Randomly add to dword, random endian. */ + + if (temp_len < 4) break; + + if (UR(2)) { + + u32 pos = UR(temp_len - 3); + + *(u32*)(out_buf + pos) += 1 + UR(ARITH_MAX); + + } else { + + u32 pos = UR(temp_len - 3); + u32 num = 1 + UR(ARITH_MAX); + + *(u32*)(out_buf + pos) = + SWAP32(SWAP32(*(u32*)(out_buf + pos)) + num); + + } + + break; + + case 10: + + /* Just set a random byte to a random value. Because, + why not. We use XOR with 1-255 to eliminate the + possibility of a no-op. */ + + out_buf[UR(temp_len)] ^= 1 + UR(255); + break; + + case 11 ... 12: { + + /* Delete bytes. We're making this a bit more likely + than insertion (the next option) in hopes of keeping + files reasonably small. */ + + u32 del_from, del_len; + + if (temp_len < 2) break; + + /* Don't delete too much. */ + + del_len = choose_block_len(temp_len - 1); + + del_from = UR(temp_len - del_len + 1); + + memmove(out_buf + del_from, out_buf + del_from + del_len, + temp_len - del_from - del_len); + + temp_len -= del_len; + + break; + + } + + case 13: + + if (temp_len + HAVOC_BLK_XL < MAX_FILE) { + + /* Clone bytes (75%) or insert a block of constant bytes (25%). */ + + u8 actually_clone = UR(4); + u32 clone_from, clone_to, clone_len; + u8* new_buf; + + if (actually_clone) { + + clone_len = choose_block_len(temp_len); + clone_from = UR(temp_len - clone_len + 1); + + } else { + + clone_len = choose_block_len(HAVOC_BLK_XL); + clone_from = 0; + + } + + clone_to = UR(temp_len); + + new_buf = ck_alloc_nozero(temp_len + clone_len); + + /* Head */ + + memcpy(new_buf, out_buf, clone_to); + + /* Inserted part */ + + if (actually_clone) + memcpy(new_buf + clone_to, out_buf + clone_from, clone_len); + else + memset(new_buf + clone_to, + UR(2) ? UR(256) : out_buf[UR(temp_len)], clone_len); + + /* Tail */ + memcpy(new_buf + clone_to + clone_len, out_buf + clone_to, + temp_len - clone_to); + + ck_free(out_buf); + out_buf = new_buf; + temp_len += clone_len; + + } + + break; + + case 14: { + + /* Overwrite bytes with a randomly selected chunk (75%) or fixed + bytes (25%). */ + + u32 copy_from, copy_to, copy_len; + + if (temp_len < 2) break; + + copy_len = choose_block_len(temp_len - 1); + + copy_from = UR(temp_len - copy_len + 1); + copy_to = UR(temp_len - copy_len + 1); + + if (UR(4)) { + + if (copy_from != copy_to) + memmove(out_buf + copy_to, out_buf + copy_from, copy_len); + + } else memset(out_buf + copy_to, + UR(2) ? UR(256) : out_buf[UR(temp_len)], copy_len); + + break; + + } + + /* Values 15 and 16 can be selected only if there are any extras + present in the dictionaries. */ + + case 15: { + + /* Overwrite bytes with an extra. */ + + if (!extras_cnt || (a_extras_cnt && UR(2))) { + + /* No user-specified extras or odds in our favor. Let's use an + auto-detected one. */ + + u32 use_extra = UR(a_extras_cnt); + u32 extra_len = a_extras[use_extra].len; + u32 insert_at; + + if (extra_len > temp_len) break; + + insert_at = UR(temp_len - extra_len + 1); + memcpy(out_buf + insert_at, a_extras[use_extra].data, extra_len); + + } else { + + /* No auto extras or odds in our favor. Use the dictionary. */ + + u32 use_extra = UR(extras_cnt); + u32 extra_len = extras[use_extra].len; + u32 insert_at; + + if (extra_len > temp_len) break; + + insert_at = UR(temp_len - extra_len + 1); + memcpy(out_buf + insert_at, extras[use_extra].data, extra_len); + + } + + break; + + } + + case 16: { + + u32 use_extra, extra_len, insert_at = UR(temp_len + 1); + u8* new_buf; + + /* Insert an extra. Do the same dice-rolling stuff as for the + previous case. */ + + if (!extras_cnt || (a_extras_cnt && UR(2))) { + + use_extra = UR(a_extras_cnt); + extra_len = a_extras[use_extra].len; + + if (temp_len + extra_len >= MAX_FILE) break; + + new_buf = ck_alloc_nozero(temp_len + extra_len); + + /* Head */ + memcpy(new_buf, out_buf, insert_at); + + /* Inserted part */ + memcpy(new_buf + insert_at, a_extras[use_extra].data, extra_len); + + } else { + + use_extra = UR(extras_cnt); + extra_len = extras[use_extra].len; + + if (temp_len + extra_len >= MAX_FILE) break; + + new_buf = ck_alloc_nozero(temp_len + extra_len); + + /* Head */ + memcpy(new_buf, out_buf, insert_at); + + /* Inserted part */ + memcpy(new_buf + insert_at, extras[use_extra].data, extra_len); + + } + + /* Tail */ + memcpy(new_buf + insert_at + extra_len, out_buf + insert_at, + temp_len - insert_at); + + ck_free(out_buf); + out_buf = new_buf; + temp_len += extra_len; + + break; + + } + + } + + } + + if (common_fuzz_stuff(argv, out_buf, temp_len)) + goto abandon_entry; + + /* out_buf might have been mangled a bit, so let's restore it to its + original size and shape. */ + + if (temp_len < len) out_buf = ck_realloc(out_buf, len); + temp_len = len; + memcpy(out_buf, in_buf, len); + + /* If we're finding new stuff, let's run for a bit longer, limits + permitting. */ + + if (queued_paths != havoc_queued) { + + if (perf_score <= HAVOC_MAX_MULT * 100) { + stage_max *= 2; + perf_score *= 2; + } + + havoc_queued = queued_paths; + + } + + } + + new_hit_cnt = queued_paths + unique_crashes; + + if (!splice_cycle) { + stage_finds[STAGE_HAVOC] += new_hit_cnt - orig_hit_cnt; + stage_cycles[STAGE_HAVOC] += stage_max; + } else { + stage_finds[STAGE_SPLICE] += new_hit_cnt - orig_hit_cnt; + stage_cycles[STAGE_SPLICE] += stage_max; + } + +#ifndef IGNORE_FINDS + + /************ + * SPLICING * + ************/ + + /* This is a last-resort strategy triggered by a full round with no findings. + It takes the current input file, randomly selects another input, and + splices them together at some offset, then relies on the havoc + code to mutate that blob. */ + +retry_splicing: + + if (use_splicing && splice_cycle++ < SPLICE_CYCLES && + queued_paths > 1 && queue_cur->len > 1) { + + struct queue_entry* target; + u32 tid, split_at; + u8* new_buf; + s32 f_diff, l_diff; + + /* First of all, if we've modified in_buf for havoc, let's clean that + up... */ + + if (in_buf != orig_in) { + ck_free(in_buf); + in_buf = orig_in; + len = queue_cur->len; + } + + /* Pick a random queue entry and seek to it. Don't splice with yourself. */ + + do { tid = UR(queued_paths); } while (tid == current_entry); + + splicing_with = tid; + target = queue; + + while (tid >= 100) { target = target->next_100; tid -= 100; } + while (tid--) target = target->next; + + /* Make sure that the target has a reasonable length. */ + + while (target && (target->len < 2 || target == queue_cur)) { + target = target->next; + splicing_with++; + } + + if (!target) goto retry_splicing; + + /* Read the testcase into a new buffer. */ + + fd = open(target->fname, O_RDONLY); + + if (fd < 0) PFATAL("Unable to open '%s'", target->fname); + + new_buf = ck_alloc_nozero(target->len); + + ck_read(fd, new_buf, target->len, target->fname); + + close(fd); + + /* Find a suitable splicing location, somewhere between the first and + the last differing byte. Bail out if the difference is just a single + byte or so. */ + + locate_diffs(in_buf, new_buf, MIN(len, target->len), &f_diff, &l_diff); + + if (f_diff < 0 || l_diff < 2 || f_diff == l_diff) { + ck_free(new_buf); + goto retry_splicing; + } + + /* Split somewhere between the first and last differing byte. */ + + split_at = f_diff + UR(l_diff - f_diff); + + /* Do the thing. */ + + len = target->len; + memcpy(new_buf, in_buf, split_at); + in_buf = new_buf; + + ck_free(out_buf); + out_buf = ck_alloc_nozero(len); + memcpy(out_buf, in_buf, len); + + goto havoc_stage; + + } + +#endif /* !IGNORE_FINDS */ + + ret_val = 0; + +abandon_entry: + + splicing_with = -1; + + /* Update pending_not_fuzzed count if we made it through the calibration + cycle and have not seen this entry before. */ + + if (!stop_soon && !queue_cur->cal_failed && !queue_cur->was_fuzzed) { + queue_cur->was_fuzzed = 1; + pending_not_fuzzed--; + if (queue_cur->favored) pending_favored--; + } + + munmap(orig_in, queue_cur->len); + + if (in_buf != orig_in) ck_free(in_buf); + ck_free(out_buf); + ck_free(eff_map); + + return ret_val; + +#undef FLIP_BIT + +} + + +/* Grab interesting test cases from other fuzzers. */ +//在分布式模糊测试中，这个函数用于同步不同fuzzer实例的进度。 +static void sync_fuzzers(char** argv) { + + DIR* sd; + struct dirent* sd_ent; + u32 sync_cnt = 0; + + sd = opendir(sync_dir); + if (!sd) PFATAL("Unable to open '%s'", sync_dir); + + stage_max = stage_cur = 0; + cur_depth = 0; + + /* Look at the entries created for every other fuzzer in the sync directory. */ + + while ((sd_ent = readdir(sd))) { + + static u8 stage_tmp[128]; + + DIR* qd; + struct dirent* qd_ent; + u8 *qd_path, *qd_synced_path; + u32 min_accept = 0, next_min_accept; + + s32 id_fd; + + /* Skip dot files and our own output directory. */ + + if (sd_ent->d_name[0] == '.' || !strcmp(sync_id, sd_ent->d_name)) continue; + + /* Skip anything that doesn't have a queue/ subdirectory. */ + + qd_path = alloc_printf("%s/%s/queue", sync_dir, sd_ent->d_name); + + if (!(qd = opendir(qd_path))) { + ck_free(qd_path); + continue; + } + + /* Retrieve the ID of the last seen test case. */ + + qd_synced_path = alloc_printf("%s/.synced/%s", out_dir, sd_ent->d_name); + + id_fd = open(qd_synced_path, O_RDWR | O_CREAT, 0600); + + if (id_fd < 0) PFATAL("Unable to create '%s'", qd_synced_path); + + if (read(id_fd, &min_accept, sizeof(u32)) > 0) + lseek(id_fd, 0, SEEK_SET); + + next_min_accept = min_accept; + + /* Show stats */ + + sprintf(stage_tmp, "sync %u", ++sync_cnt); + stage_name = stage_tmp; + stage_cur = 0; + stage_max = 0; + + /* For every file queued by this fuzzer, parse ID and see if we have looked at + it before; exec a test case if not. */ + + while ((qd_ent = readdir(qd))) { + + u8* path; + s32 fd; + struct stat st; + + if (qd_ent->d_name[0] == '.' || + sscanf(qd_ent->d_name, CASE_PREFIX "%06u", &syncing_case) != 1 || + syncing_case < min_accept) continue; + + /* OK, sounds like a new one. Let's give it a try. */ + + if (syncing_case >= next_min_accept) + next_min_accept = syncing_case + 1; + + path = alloc_printf("%s/%s", qd_path, qd_ent->d_name); + + /* Allow this to fail in case the other fuzzer is resuming or so... */ + + fd = open(path, O_RDONLY); + + if (fd < 0) { + ck_free(path); + continue; + } + + if (fstat(fd, &st)) PFATAL("fstat() failed"); + + /* Ignore zero-sized or oversized files. */ + + if (st.st_size && st.st_size <= MAX_FILE) { + + u8 fault; + u8* mem = mmap(0, st.st_size, PROT_READ, MAP_PRIVATE, fd, 0); + + if (mem == MAP_FAILED) PFATAL("Unable to mmap '%s'", path); + + /* See what happens. We rely on save_if_interesting() to catch major + errors and save the test case. */ + + write_to_testcase(mem, st.st_size); + + fault = run_target(argv, exec_tmout); + + if (stop_soon) return; + + syncing_party = sd_ent->d_name; + queued_imported += save_if_interesting(argv, mem, st.st_size, fault); + syncing_party = 0; + + munmap(mem, st.st_size); + + if (!(stage_cur++ % stats_update_freq)) show_stats(); + + } + + ck_free(path); + close(fd); + + } + + ck_write(id_fd, &next_min_accept, sizeof(u32), qd_synced_path); + + close(id_fd); + closedir(qd); + ck_free(qd_path); + ck_free(qd_synced_path); + + } + + closedir(sd); + +} + + +/* Handle stop signal (Ctrl-C, etc). */ +//处理停止信号（如Ctrl+C）的函数。它设置一个标志来告诉主循环停止执行。 +static void handle_stop_sig(int sig) { + + stop_soon = 1; + + if (child_pid > 0) kill(child_pid, SIGKILL); + if (forksrv_pid > 0) kill(forksrv_pid, SIGKILL); + +} + + +/* Handle skip request (SIGUSR1). */ + +static void handle_skipreq(int sig) { + + skip_requested = 1; + +} + +/* Handle timeout (SIGALRM). */ +//处理超时信号的函数。它设置一个标志来指示目标程序已经超时。 +static void handle_timeout(int sig) { + + if (child_pid > 0) { + + child_timed_out = 1; + kill(child_pid, SIGKILL); + + } else if (child_pid == -1 && forksrv_pid > 0) { + + child_timed_out = 1; + kill(forksrv_pid, SIGKILL); + + } + +} + + +/* Do a PATH search and find target binary to see that it exists and + isn't a shell script - a common and painful mistake. We also check for + a valid ELF header and for evidence of AFL instrumentation. */ +//检查目标二进制文件是否存在，是否可执行，以及是否具有AFL所需的 instrumentation（ instrumentation是AFL用来追踪执行路径的一种技术）。 +EXP_ST void check_binary(u8* fname) { + + u8* env_path = 0; + struct stat st; + + s32 fd; + u8* f_data; + u32 f_len = 0; + + ACTF("Validating target binary..."); + + if (strchr(fname, '/') || !(env_path = getenv("PATH"))) { + + target_path = ck_strdup(fname); + if (stat(target_path, &st) || !S_ISREG(st.st_mode) || + !(st.st_mode & 0111) || (f_len = st.st_size) < 4) + FATAL("Program '%s' not found or not executable", fname); + + } else { + + while (env_path) { + + u8 *cur_elem, *delim = strchr(env_path, ':'); + + if (delim) { + + cur_elem = ck_alloc(delim - env_path + 1); + memcpy(cur_elem, env_path, delim - env_path); + delim++; + + } else cur_elem = ck_strdup(env_path); + + env_path = delim; + + if (cur_elem[0]) + target_path = alloc_printf("%s/%s", cur_elem, fname); + else + target_path = ck_strdup(fname); + + ck_free(cur_elem); + + if (!stat(target_path, &st) && S_ISREG(st.st_mode) && + (st.st_mode & 0111) && (f_len = st.st_size) >= 4) break; + + ck_free(target_path); + target_path = 0; + + } + + if (!target_path) FATAL("Program '%s' not found or not executable", fname); + + } + + if (getenv("AFL_SKIP_BIN_CHECK")) return; + + /* Check for blatant user errors. */ + + if ((!strncmp(target_path, "/tmp/", 5) && !strchr(target_path + 5, '/')) || + (!strncmp(target_path, "/var/tmp/", 9) && !strchr(target_path + 9, '/'))) + FATAL("Please don't keep binaries in /tmp or /var/tmp"); + + fd = open(target_path, O_RDONLY); + + if (fd < 0) PFATAL("Unable to open '%s'", target_path); + + f_data = mmap(0, f_len, PROT_READ, MAP_PRIVATE, fd, 0); + + if (f_data == MAP_FAILED) PFATAL("Unable to mmap file '%s'", target_path); + + close(fd); + + if (f_data[0] == '#' && f_data[1] == '!') { + + SAYF("\n" cLRD "[-] " cRST + "Oops, the target binary looks like a shell script. Some build systems will\n" + " sometimes generate shell stubs for dynamically linked programs; try static\n" + " library mode (./configure --disable-shared) if that's the case.\n\n" + + " Another possible cause is that you are actually trying to use a shell\n" + " wrapper around the fuzzed component. Invoking shell can slow down the\n" + " fuzzing process by a factor of 20x or more; it's best to write the wrapper\n" + " in a compiled language instead.\n"); + + FATAL("Program '%s' is a shell script", target_path); + + } + +#ifndef __APPLE__ + + if (f_data[0] != 0x7f || memcmp(f_data + 1, "ELF", 3)) + FATAL("Program '%s' is not an ELF binary", target_path); + +#else + + if (f_data[0] != 0xCF || f_data[1] != 0xFA || f_data[2] != 0xED) + FATAL("Program '%s' is not a 64-bit Mach-O binary", target_path); + +#endif /* ^!__APPLE__ */ + + if (!qemu_mode && !dumb_mode && + !memmem(f_data, f_len, SHM_ENV_VAR, strlen(SHM_ENV_VAR) + 1)) { + + SAYF("\n" cLRD "[-] " cRST + "Looks like the target binary is not instrumented! The fuzzer depends on\n" + " compile-time instrumentation to isolate interesting test cases while\n" + " mutating the input data. For more information, and for tips on how to\n" + " instrument binaries, please see %s/README.\n\n" + + " When source code is not available, you may be able to leverage QEMU\n" + " mode support. Consult the README for tips on how to enable this.\n" + + " (It is also possible to use afl-fuzz as a traditional, \"dumb\" fuzzer.\n" + " For that, you can use the -n option - but expect much worse results.)\n", + doc_path); + + FATAL("No instrumentation detected"); + + } + + if (qemu_mode && + memmem(f_data, f_len, SHM_ENV_VAR, strlen(SHM_ENV_VAR) + 1)) { + + SAYF("\n" cLRD "[-] " cRST + "This program appears to be instrumented with afl-gcc, but is being run in\n" + " QEMU mode (-Q). This is probably not what you want - this setup will be\n" + " slow and offer no practical benefits.\n"); + + FATAL("Instrumentation found in -Q mode"); + + } + + if (memmem(f_data, f_len, "libasan.so", 10) || + memmem(f_data, f_len, "__msan_init", 11)) uses_asan = 1; + + /* Detect persistent & deferred init signatures in the binary. */ + + if (memmem(f_data, f_len, PERSIST_SIG, strlen(PERSIST_SIG) + 1)) { + + OKF(cPIN "Persistent mode binary detected."); + setenv(PERSIST_ENV_VAR, "1", 1); + persistent_mode = 1; + + } else if (getenv("AFL_PERSISTENT")) { + + WARNF("AFL_PERSISTENT is no longer supported and may misbehave!"); + + } + + if (memmem(f_data, f_len, DEFER_SIG, strlen(DEFER_SIG) + 1)) { + + OKF(cPIN "Deferred forkserver binary detected."); + setenv(DEFER_ENV_VAR, "1", 1); + deferred_mode = 1; + + } else if (getenv("AFL_DEFER_FORKSRV")) { + + WARNF("AFL_DEFER_FORKSRV is no longer supported and may misbehave!"); + + } + + if (munmap(f_data, f_len)) PFATAL("unmap() failed"); + +} + + +/* Trim and possibly create a banner for the run. */ + +static void fix_up_banner(u8* name) { + + if (!use_banner) { + + if (sync_id) { + + use_banner = sync_id; + + } else { + + u8* trim = strrchr(name, '/'); + if (!trim) use_banner = name; else use_banner = trim + 1; + + } + + } + + if (strlen(use_banner) > 40) { + + u8* tmp = ck_alloc(44); + sprintf(tmp, "%.40s...", use_banner); + use_banner = tmp; + + } + +} + + +/* Check if we're on TTY. */ +//检查程序是否运行在TTY上。这个函数用于确定输出是否应该是交互式的，以及是否应该显示进度信息。 +static void check_if_tty(void) { + + struct winsize ws; + + if (getenv("AFL_NO_UI")) { + OKF("Disabling the UI because AFL_NO_UI is set."); + not_on_tty = 1; + return; + } + + if (ioctl(1, TIOCGWINSZ, &ws)) { + + if (errno == ENOTTY) { + OKF("Looks like we're not running on a tty, so I'll be a bit less verbose."); + not_on_tty = 1; + } + + return; + } + +} + + +/* Check terminal dimensions after resize. */ + +static void check_term_size(void) { + + struct winsize ws; + + term_too_small = 0; + + if (ioctl(1, TIOCGWINSZ, &ws)) return; + + if (ws.ws_row == 0 && ws.ws_col == 0) return; + if (ws.ws_row < 25 || ws.ws_col < 80) term_too_small = 1; + +} + + + +/* Display usage hints. */ + +static void usage(u8* argv0) { + + SAYF("\n%s [ options ] -- /path/to/fuzzed_app [ ... ]\n\n" + + "Required parameters:\n\n" + + " -i dir - input directory with test cases\n" + " -o dir - output directory for fuzzer findings\n\n" + + "Execution control settings:\n\n" + + " -f file - location read by the fuzzed program (stdin)\n" + " -t msec - timeout for each run (auto-scaled, 50-%u ms)\n" + " -m megs - memory limit for child process (%u MB)\n" + " -Q - use binary-only instrumentation (QEMU mode)\n\n" + + "Fuzzing behavior settings:\n\n" + + " -d - quick & dirty mode (skips deterministic steps)\n" + " -n - fuzz without instrumentation (dumb mode)\n" + " -x dir - optional fuzzer dictionary (see README)\n\n" + + "Other stuff:\n\n" + + " -T text - text banner to show on the screen\n" + " -M / -S id - distributed mode (see parallel_fuzzing.txt)\n" + " -C - crash exploration mode (the peruvian rabbit thing)\n" + " -V - show version number and exit\n\n" + " -b cpu_id - bind the fuzzing process to the specified CPU core\n\n" + + "For additional tips, please consult %s/README.\n\n", + + argv0, EXEC_TIMEOUT, MEM_LIMIT, doc_path); + + exit(1); + +} + + +/* Prepare output directories and fds. */ +//准备输出目录和文件描述符。它确保所有必要的目录都存在，并设置了一些文件描述符，以便在模糊测试过程中使用。 +EXP_ST void setup_dirs_fds(void) { + + u8* tmp; + s32 fd; + + ACTF("Setting up output directories..."); + + if (sync_id && mkdir(sync_dir, 0700) && errno != EEXIST) + PFATAL("Unable to create '%s'", sync_dir); + + if (mkdir(out_dir, 0700)) { + + if (errno != EEXIST) PFATAL("Unable to create '%s'", out_dir); + + maybe_delete_out_dir(); + + } else { + + if (in_place_resume) + FATAL("Resume attempted but old output directory not found"); + + out_dir_fd = open(out_dir, O_RDONLY); + +#ifndef __sun + + if (out_dir_fd < 0 || flock(out_dir_fd, LOCK_EX | LOCK_NB)) + PFATAL("Unable to flock() output directory."); + +#endif /* !__sun */ + + } + + /* Queue directory for any starting & discovered paths. */ + + tmp = alloc_printf("%s/queue", out_dir); + if (mkdir(tmp, 0700)) PFATAL("Unable to create '%s'", tmp); + ck_free(tmp); + + /* Top-level directory for queue metadata used for session + resume and related tasks. */ + + tmp = alloc_printf("%s/queue/.state/", out_dir); + if (mkdir(tmp, 0700)) PFATAL("Unable to create '%s'", tmp); + ck_free(tmp); + + /* Directory for flagging queue entries that went through + deterministic fuzzing in the past. */ + + tmp = alloc_printf("%s/queue/.state/deterministic_done/", out_dir); + if (mkdir(tmp, 0700)) PFATAL("Unable to create '%s'", tmp); + ck_free(tmp); + + /* Directory with the auto-selected dictionary entries. */ + + tmp = alloc_printf("%s/queue/.state/auto_extras/", out_dir); + if (mkdir(tmp, 0700)) PFATAL("Unable to create '%s'", tmp); + ck_free(tmp); + + /* The set of paths currently deemed redundant. */ + + tmp = alloc_printf("%s/queue/.state/redundant_edges/", out_dir); + if (mkdir(tmp, 0700)) PFATAL("Unable to create '%s'", tmp); + ck_free(tmp); + + /* The set of paths showing variable behavior. */ + + tmp = alloc_printf("%s/queue/.state/variable_behavior/", out_dir); + if (mkdir(tmp, 0700)) PFATAL("Unable to create '%s'", tmp); + ck_free(tmp); + + /* Sync directory for keeping track of cooperating fuzzers. */ + + if (sync_id) { + + tmp = alloc_printf("%s/.synced/", out_dir); + + if (mkdir(tmp, 0700) && (!in_place_resume || errno != EEXIST)) + PFATAL("Unable to create '%s'", tmp); + + ck_free(tmp); + + } + + /* All recorded crashes. */ + + tmp = alloc_printf("%s/crashes", out_dir); + if (mkdir(tmp, 0700)) PFATAL("Unable to create '%s'", tmp); + ck_free(tmp); + + /* All recorded hangs. */ + + tmp = alloc_printf("%s/hangs", out_dir); + if (mkdir(tmp, 0700)) PFATAL("Unable to create '%s'", tmp); + ck_free(tmp); + + /* Generally useful file descriptors. */ + + dev_null_fd = open("/dev/null", O_RDWR); + if (dev_null_fd < 0) PFATAL("Unable to open /dev/null"); + + dev_urandom_fd = open("/dev/urandom", O_RDONLY); + if (dev_urandom_fd < 0) PFATAL("Unable to open /dev/urandom"); + + /* Gnuplot output file. */ + + tmp = alloc_printf("%s/plot_data", out_dir); + fd = open(tmp, O_WRONLY | O_CREAT | O_EXCL, 0600); + if (fd < 0) PFATAL("Unable to create '%s'", tmp); + ck_free(tmp); + + plot_file = fdopen(fd, "w"); + if (!plot_file) PFATAL("fdopen() failed"); + + fprintf(plot_file, "# unix_time, cycles_done, cur_path, paths_total, " + "pending_total, pending_favs, map_size, unique_crashes, " + "unique_hangs, max_depth, execs_per_sec\n"); + /* ignore errors */ + +} + + +/* Setup the output file for fuzzed data, if not using -f. */ + +EXP_ST void setup_stdio_file(void) { + + u8* fn = alloc_printf("%s/.cur_input", out_dir); + + unlink(fn); /* Ignore errors */ + + out_fd = open(fn, O_RDWR | O_CREAT | O_EXCL, 0600); + + if (out_fd < 0) PFATAL("Unable to create '%s'", fn); + + ck_free(fn); + +} + + +/* Make sure that core dumps don't go to a program. */ + +static void check_crash_handling(void) { + +#ifdef __APPLE__ + + /* Yuck! There appears to be no simple C API to query for the state of + loaded daemons on MacOS X, and I'm a bit hesitant to do something + more sophisticated, such as disabling crash reporting via Mach ports, + until I get a box to test the code. So, for now, we check for crash + reporting the awful way. */ + + if (system("launchctl list 2>/dev/null | grep -q '\\.ReportCrash$'")) return; + + SAYF("\n" cLRD "[-] " cRST + "Whoops, your system is configured to forward crash notifications to an\n" + " external crash reporting utility. This will cause issues due to the\n" + " extended delay between the fuzzed binary malfunctioning and this fact\n" + " being relayed to the fuzzer via the standard waitpid() API.\n\n" + " To avoid having crashes misinterpreted as timeouts, please run the\n" + " following commands:\n\n" + + " SL=/System/Library; PL=com.apple.ReportCrash\n" + " launchctl unload -w ${SL}/LaunchAgents/${PL}.plist\n" + " sudo launchctl unload -w ${SL}/LaunchDaemons/${PL}.Root.plist\n"); + + if (!getenv("AFL_I_DONT_CARE_ABOUT_MISSING_CRASHES")) + FATAL("Crash reporter detected"); + +#else + + /* This is Linux specific, but I don't think there's anything equivalent on + *BSD, so we can just let it slide for now. */ + + s32 fd = open("/proc/sys/kernel/core_pattern", O_RDONLY); + u8 fchar; + + if (fd < 0) return; + + ACTF("Checking core_pattern..."); + + if (read(fd, &fchar, 1) == 1 && fchar == '|') { + + SAYF("\n" cLRD "[-] " cRST + "Hmm, your system is configured to send core dump notifications to an\n" + " external utility. This will cause issues: there will be an extended delay\n" + " between stumbling upon a crash and having this information relayed to the\n" + " fuzzer via the standard waitpid() API.\n\n" + + " To avoid having crashes misinterpreted as timeouts, please log in as root\n" + " and temporarily modify /proc/sys/kernel/core_pattern, like so:\n\n" + + " echo core >/proc/sys/kernel/core_pattern\n"); + + if (!getenv("AFL_I_DONT_CARE_ABOUT_MISSING_CRASHES")) + FATAL("Pipe at the beginning of 'core_pattern'"); + + } + + close(fd); + +#endif /* ^__APPLE__ */ + +} + + +/* Check CPU governor. */ +//检查CPU调速器设置的函数。确保CPU在高负载下不会降频，从而影响测试的执行速度。 +static void check_cpu_governor(void) { + + FILE* f; + u8 tmp[128]; + u64 min = 0, max = 0; + + if (getenv("AFL_SKIP_CPUFREQ")) return; + + f = fopen("/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor", "r"); + if (!f) return; + + ACTF("Checking CPU scaling governor..."); + + if (!fgets(tmp, 128, f)) PFATAL("fgets() failed"); + + fclose(f); + + if (!strncmp(tmp, "perf", 4)) return; + + f = fopen("/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq", "r"); + + if (f) { + if (fscanf(f, "%llu", &min) != 1) min = 0; + fclose(f); + } + + f = fopen("/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq", "r"); + + if (f) { + if (fscanf(f, "%llu", &max) != 1) max = 0; + fclose(f); + } + + if (min == max) return; + + SAYF("\n" cLRD "[-] " cRST + "Whoops, your system uses on-demand CPU frequency scaling, adjusted\n" + " between %llu and %llu MHz. Unfortunately, the scaling algorithm in the\n" + " kernel is imperfect and can miss the short-lived processes spawned by\n" + " afl-fuzz. To keep things moving, run these commands as root:\n\n" + + " cd /sys/devices/system/cpu\n" + " echo performance | tee cpu*/cpufreq/scaling_governor\n\n" + + " You can later go back to the original state by replacing 'performance' with\n" + " 'ondemand'. If you don't want to change the settings, set AFL_SKIP_CPUFREQ\n" + " to make afl-fuzz skip this check - but expect some performance drop.\n", + min / 1024, max / 1024); + + FATAL("Suboptimal CPU scaling governor"); + +} + + +/* Count the number of logical CPU cores. */ +//获取CPU核心数。这个函数用于确定系统中可用的CPU核心数，以便AFL可以有效地分配工作负载。 +static void get_core_count(void) { + + u32 cur_runnable = 0; + +#if defined(__APPLE__) || defined(__FreeBSD__) || defined (__OpenBSD__) + + size_t s = sizeof(cpu_core_count); + + /* On *BSD systems, we can just use a sysctl to get the number of CPUs. */ + +#ifdef __APPLE__ + + if (sysctlbyname("hw.logicalcpu", &cpu_core_count, &s, NULL, 0) < 0) + return; + +#else + + int s_name[2] = { CTL_HW, HW_NCPU }; + + if (sysctl(s_name, 2, &cpu_core_count, &s, NULL, 0) < 0) return; + +#endif /* ^__APPLE__ */ + +#else + +#ifdef HAVE_AFFINITY + + cpu_core_count = sysconf(_SC_NPROCESSORS_ONLN); + +#else + + FILE* f = fopen("/proc/stat", "r"); + u8 tmp[1024]; + + if (!f) return; + + while (fgets(tmp, sizeof(tmp), f)) + if (!strncmp(tmp, "cpu", 3) && isdigit(tmp[3])) cpu_core_count++; + + fclose(f); + +#endif /* ^HAVE_AFFINITY */ + +#endif /* ^(__APPLE__ || __FreeBSD__ || __OpenBSD__) */ + + if (cpu_core_count > 0) { + + cur_runnable = (u32)get_runnable_processes(); + +#if defined(__APPLE__) || defined(__FreeBSD__) || defined (__OpenBSD__) + + /* Add ourselves, since the 1-minute average doesn't include that yet. */ + + cur_runnable++; + +#endif /* __APPLE__ || __FreeBSD__ || __OpenBSD__ */ + + OKF("You have %u CPU core%s and %u runnable tasks (utilization: %0.0f%%).", + cpu_core_count, cpu_core_count > 1 ? "s" : "", + cur_runnable, cur_runnable * 100.0 / cpu_core_count); + + if (cpu_core_count > 1) { + + if (cur_runnable > cpu_core_count * 1.5) { + + WARNF("System under apparent load, performance may be spotty."); + + } else if (cur_runnable + 1 <= cpu_core_count) { + + OKF("Try parallel jobs - see %s/parallel_fuzzing.txt.", doc_path); + + } + + } + + } else { + + cpu_core_count = 0; + WARNF("Unable to figure out the number of CPU cores."); + + } + +} + + +/* Validate and fix up out_dir and sync_dir when using -S. */ + +static void fix_up_sync(void) { + + u8* x = sync_id; + + if (dumb_mode) + FATAL("-S / -M and -n are mutually exclusive"); + + if (skip_deterministic) { + + if (force_deterministic) + FATAL("use -S instead of -M -d"); + else + FATAL("-S already implies -d"); + + } + + while (*x) { + + if (!isalnum(*x) && *x != '_' && *x != '-') + FATAL("Non-alphanumeric fuzzer ID specified via -S or -M"); + + x++; + + } + + if (strlen(sync_id) > 32) FATAL("Fuzzer ID too long"); + + x = alloc_printf("%s/%s", out_dir, sync_id); + + sync_dir = out_dir; + out_dir = x; + + if (!force_deterministic) { + skip_deterministic = 1; + use_splicing = 1; + } + +} + + +/* Handle screen resize (SIGWINCH). */ + +static void handle_resize(int sig) { + clear_screen = 1; +} + + +/* Check ASAN options. */ + +static void check_asan_opts(void) { + u8* x = getenv("ASAN_OPTIONS"); + + if (x) { + + if (!strstr(x, "abort_on_error=1")) + FATAL("Custom ASAN_OPTIONS set without abort_on_error=1 - please fix!"); + + if (!strstr(x, "symbolize=0")) + FATAL("Custom ASAN_OPTIONS set without symbolize=0 - please fix!"); + + } + + x = getenv("MSAN_OPTIONS"); + + if (x) { + + if (!strstr(x, "exit_code=" STRINGIFY(MSAN_ERROR))) + FATAL("Custom MSAN_OPTIONS set without exit_code=" + STRINGIFY(MSAN_ERROR) " - please fix!"); + + if (!strstr(x, "symbolize=0")) + FATAL("Custom MSAN_OPTIONS set without symbolize=0 - please fix!"); + + } + +} + + +/* Detect @@ in args. */ + +EXP_ST void detect_file_args(char** argv) { + + u32 i = 0; + u8* cwd = getcwd(NULL, 0); + + if (!cwd) PFATAL("getcwd() failed"); + + while (argv[i]) { + + u8* aa_loc = strstr(argv[i], "@@"); + + if (aa_loc) { + + u8 *aa_subst, *n_arg; + + /* If we don't have a file name chosen yet, use a safe default. */ + + if (!out_file) + out_file = alloc_printf("%s/.cur_input", out_dir); + + /* Be sure that we're always using fully-qualified paths. */ + + if (out_file[0] == '/') aa_subst = out_file; + else aa_subst = alloc_printf("%s/%s", cwd, out_file); + + /* Construct a replacement argv value. */ + + *aa_loc = 0; + n_arg = alloc_printf("%s%s%s", argv[i], aa_subst, aa_loc + 2); + argv[i] = n_arg; + *aa_loc = '@'; + + if (out_file[0] != '/') ck_free(aa_subst); + + } + + i++; + + } + + free(cwd); /* not tracked */ + +} + + +/* Set up signal handlers. More complicated that needs to be, because libc on + Solaris doesn't resume interrupted reads(), sets SA_RESETHAND when you call + siginterrupt(), and does other unnecessary things. */ + +EXP_ST void setup_signal_handlers(void) { + + struct sigaction sa; + + sa.sa_handler = NULL; + sa.sa_flags = SA_RESTART; + sa.sa_sigaction = NULL; + + sigemptyset(&sa.sa_mask); + + /* Various ways of saying "stop". */ + + sa.sa_handler = handle_stop_sig; + sigaction(SIGHUP, &sa, NULL); + sigaction(SIGINT, &sa, NULL); + sigaction(SIGTERM, &sa, NULL); + + /* Exec timeout notifications. */ + + sa.sa_handler = handle_timeout; + sigaction(SIGALRM, &sa, NULL); + + /* Window resize */ + + sa.sa_handler = handle_resize; + sigaction(SIGWINCH, &sa, NULL); + + /* SIGUSR1: skip entry */ + + sa.sa_handler = handle_skipreq; + sigaction(SIGUSR1, &sa, NULL); + + /* Things we don't care about. */ + + sa.sa_handler = SIG_IGN; + sigaction(SIGTSTP, &sa, NULL); + sigaction(SIGPIPE, &sa, NULL); + +} + + +/* Rewrite argv for QEMU. */ + +static char** get_qemu_argv(u8* own_loc, char** argv, int argc) { + + char** new_argv = ck_alloc(sizeof(char*) * (argc + 4)); + u8 *tmp, *cp, *rsl, *own_copy; + + /* Workaround for a QEMU stability glitch. */ + + setenv("QEMU_LOG", "nochain", 1); + + memcpy(new_argv + 3, argv + 1, sizeof(char*) * argc); + + new_argv[2] = target_path; + new_argv[1] = "--"; + + /* Now we need to actually find the QEMU binary to put in argv[0]. */ + + tmp = getenv("AFL_PATH"); + + if (tmp) { + + cp = alloc_printf("%s/afl-qemu-trace", tmp); + + if (access(cp, X_OK)) + FATAL("Unable to find '%s'", tmp); + + target_path = new_argv[0] = cp; + return new_argv; + + } + + own_copy = ck_strdup(own_loc); + rsl = strrchr(own_copy, '/'); + + if (rsl) { + + *rsl = 0; + + cp = alloc_printf("%s/afl-qemu-trace", own_copy); + ck_free(own_copy); + + if (!access(cp, X_OK)) { + + target_path = new_argv[0] = cp; + return new_argv; + + } + + } else ck_free(own_copy); + + if (!access(BIN_PATH "/afl-qemu-trace", X_OK)) { + + target_path = new_argv[0] = ck_strdup(BIN_PATH "/afl-qemu-trace"); + return new_argv; + + } + + SAYF("\n" cLRD "[-] " cRST + "Oops, unable to find the 'afl-qemu-trace' binary. The binary must be built\n" + " separately by following the instructions in qemu_mode/README.qemu. If you\n" + " already have the binary installed, you may need to specify AFL_PATH in the\n" + " environment.\n\n" + + " Of course, even without QEMU, afl-fuzz can still work with binaries that are\n" + " instrumented at compile time with afl-gcc. It is also possible to use it as a\n" + " traditional \"dumb\" fuzzer by specifying '-n' in the command line.\n"); + + FATAL("Failed to locate 'afl-qemu-trace'."); + +} + + +/* Make a copy of the current command line. */ + +static void save_cmdline(u32 argc, char** argv) { + + u32 len = 1, i; + u8* buf; + + for (i = 0; i < argc; i++) + len += strlen(argv[i]) + 1; + + buf = orig_cmdline = ck_alloc(len); + + for (i = 0; i < argc; i++) { + + u32 l = strlen(argv[i]); + + memcpy(buf, argv[i], l); + buf += l; + + if (i != argc - 1) *(buf++) = ' '; + + } + + *buf = 0; + +} + + +#ifndef AFL_LIB + +/* Main entry point */ +//程序的主入口点。它处理命令行参数，设置信号处理程序，初始化共享内存，读取测试用例，执行干运行以验证目标程序，然后进入主循环进行模糊测试。 +int main(int argc, char** argv) { + + s32 opt; + u64 prev_queued = 0; + u32 sync_interval_cnt = 0, seek_to; + u8 *extras_dir = 0; + u8 mem_limit_given = 0; + u8 exit_1 = !!getenv("AFL_BENCH_JUST_ONE"); + char** use_argv; + + struct timeval tv; + struct timezone tz; + + SAYF(cCYA "afl-fuzz " cBRI VERSION cRST " by \n"); + + doc_path = access(DOC_PATH, F_OK) ? "docs" : DOC_PATH; + + gettimeofday(&tv, &tz); + srandom(tv.tv_sec ^ tv.tv_usec ^ getpid()); + + while ((opt = getopt(argc, argv, "+i:o:f:m:b:t:T:dnCB:S:M:x:QV")) > 0) + + switch (opt) { + + case 'i': /* input dir */ + + if (in_dir) FATAL("Multiple -i options not supported"); + in_dir = optarg; + + if (!strcmp(in_dir, "-")) in_place_resume = 1; + + break; + + case 'o': /* output dir */ + + if (out_dir) FATAL("Multiple -o options not supported"); + out_dir = optarg; + break; + + case 'M': { /* master sync ID */ + + u8* c; + + if (sync_id) FATAL("Multiple -S or -M options not supported"); + sync_id = ck_strdup(optarg); + + if ((c = strchr(sync_id, ':'))) { + + *c = 0; + + if (sscanf(c + 1, "%u/%u", &master_id, &master_max) != 2 || + !master_id || !master_max || master_id > master_max || + master_max > 1000000) FATAL("Bogus master ID passed to -M"); + + } + + force_deterministic = 1; + + } + + break; + + case 'S': + + if (sync_id) FATAL("Multiple -S or -M options not supported"); + sync_id = ck_strdup(optarg); + break; + + case 'f': /* target file */ + + if (out_file) FATAL("Multiple -f options not supported"); + out_file = optarg; + break; + + case 'x': /* dictionary */ + + if (extras_dir) FATAL("Multiple -x options not supported"); + extras_dir = optarg; + break; + + case 't': { /* timeout */ + + u8 suffix = 0; + + if (timeout_given) FATAL("Multiple -t options not supported"); + + if (sscanf(optarg, "%u%c", &exec_tmout, &suffix) < 1 || + optarg[0] == '-') FATAL("Bad syntax used for -t"); + + if (exec_tmout < 5) FATAL("Dangerously low value of -t"); + + if (suffix == '+') timeout_given = 2; else timeout_given = 1; + + break; + + } + + case 'm': { /* mem limit */ + + u8 suffix = 'M'; + + if (mem_limit_given) FATAL("Multiple -m options not supported"); + mem_limit_given = 1; + + if (!strcmp(optarg, "none")) { + + mem_limit = 0; + break; + + } + + if (sscanf(optarg, "%llu%c", &mem_limit, &suffix) < 1 || + optarg[0] == '-') FATAL("Bad syntax used for -m"); + + switch (suffix) { + + case 'T': mem_limit *= 1024 * 1024; break; + case 'G': mem_limit *= 1024; break; + case 'k': mem_limit /= 1024; break; + case 'M': break; + + default: FATAL("Unsupported suffix or bad syntax for -m"); + + } + + if (mem_limit < 5) FATAL("Dangerously low value of -m"); + + if (sizeof(rlim_t) == 4 && mem_limit > 2000) + FATAL("Value of -m out of range on 32-bit systems"); + + } + + break; + + case 'b': { /* bind CPU core */ + + if (cpu_to_bind_given) FATAL("Multiple -b options not supported"); + cpu_to_bind_given = 1; + + if (sscanf(optarg, "%u", &cpu_to_bind) < 1 || + optarg[0] == '-') FATAL("Bad syntax used for -b"); + + break; + + } + + case 'd': /* skip deterministic */ + + if (skip_deterministic) FATAL("Multiple -d options not supported"); + skip_deterministic = 1; + use_splicing = 1; + break; + + case 'B': /* load bitmap */ + + /* This is a secret undocumented option! It is useful if you find + an interesting test case during a normal fuzzing process, and want + to mutate it without rediscovering any of the test cases already + found during an earlier run. + + To use this mode, you need to point -B to the fuzz_bitmap produced + by an earlier run for the exact same binary... and that's it. + + I only used this once or twice to get variants of a particular + file, so I'm not making this an official setting. */ + + if (in_bitmap) FATAL("Multiple -B options not supported"); + + in_bitmap = optarg; + read_bitmap(in_bitmap); + break; + + case 'C': /* crash mode */ + + if (crash_mode) FATAL("Multiple -C options not supported"); + crash_mode = FAULT_CRASH; + break; + + case 'n': /* dumb mode */ + + if (dumb_mode) FATAL("Multiple -n options not supported"); + if (getenv("AFL_DUMB_FORKSRV")) dumb_mode = 2; else dumb_mode = 1; + + break; + + case 'T': /* banner */ + + if (use_banner) FATAL("Multiple -T options not supported"); + use_banner = optarg; + break; + + case 'Q': /* QEMU mode */ + + if (qemu_mode) FATAL("Multiple -Q options not supported"); + qemu_mode = 1; + + if (!mem_limit_given) mem_limit = MEM_LIMIT_QEMU; + + break; + + case 'V': /* Show version number */ + + /* Version number has been printed already, just quit. */ + exit(0); + + default: + + usage(argv[0]); + + } + + if (optind == argc || !in_dir || !out_dir) usage(argv[0]); + + setup_signal_handlers(); + check_asan_opts(); + + if (sync_id) fix_up_sync(); + + if (!strcmp(in_dir, out_dir)) + FATAL("Input and output directories can't be the same"); + + if (dumb_mode) { + + if (crash_mode) FATAL("-C and -n are mutually exclusive"); + if (qemu_mode) FATAL("-Q and -n are mutually exclusive"); + + } + + if (getenv("AFL_NO_FORKSRV")) no_forkserver = 1; + if (getenv("AFL_NO_CPU_RED")) no_cpu_meter_red = 1; + if (getenv("AFL_NO_ARITH")) no_arith = 1; + if (getenv("AFL_SHUFFLE_QUEUE")) shuffle_queue = 1; + if (getenv("AFL_FAST_CAL")) fast_cal = 1; + + if (getenv("AFL_HANG_TMOUT")) { + hang_tmout = atoi(getenv("AFL_HANG_TMOUT")); + if (!hang_tmout) FATAL("Invalid value of AFL_HANG_TMOUT"); + } + + if (dumb_mode == 2 && no_forkserver) + FATAL("AFL_DUMB_FORKSRV and AFL_NO_FORKSRV are mutually exclusive"); + + if (getenv("AFL_PRELOAD")) { + setenv("LD_PRELOAD", getenv("AFL_PRELOAD"), 1); + setenv("DYLD_INSERT_LIBRARIES", getenv("AFL_PRELOAD"), 1); + } + + if (getenv("AFL_LD_PRELOAD")) + FATAL("Use AFL_PRELOAD instead of AFL_LD_PRELOAD"); + + save_cmdline(argc, argv); + + fix_up_banner(argv[optind]); + + check_if_tty(); + + get_core_count(); + +#ifdef HAVE_AFFINITY + bind_to_free_cpu(); +#endif /* HAVE_AFFINITY */ + + check_crash_handling(); + check_cpu_governor(); + + setup_post(); + setup_shm(); + init_count_class16(); + + setup_dirs_fds(); + read_testcases(); + load_auto(); + + pivot_inputs(); + + if (extras_dir) load_extras(extras_dir); + + if (!timeout_given) find_timeout(); + + detect_file_args(argv + optind + 1); + + if (!out_file) setup_stdio_file(); + + check_binary(argv[optind]); + + start_time = get_cur_time(); + + if (qemu_mode) + use_argv = get_qemu_argv(argv[0], argv + optind, argc - optind); + else + use_argv = argv + optind; + + perform_dry_run(use_argv); + + cull_queue(); + + show_init_stats(); + + seek_to = find_start_position(); + + write_stats_file(0, 0, 0); + save_auto(); + + if (stop_soon) goto stop_fuzzing; + + /* Woop woop woop */ + + if (!not_on_tty) { + sleep(4); + start_time += 4000; + if (stop_soon) goto stop_fuzzing; + } + + while (1) { + + u8 skipped_fuzz; + + cull_queue(); + + if (!queue_cur) { + + queue_cycle++; + current_entry = 0; + cur_skipped_paths = 0; + queue_cur = queue; + + while (seek_to) { + current_entry++; + seek_to--; + queue_cur = queue_cur->next; + } + + show_stats(); + + if (not_on_tty) { + ACTF("Entering queue cycle %llu.", queue_cycle); + fflush(stdout); + } + + /* If we had a full queue cycle with no new finds, try + recombination strategies next. */ + + if (queued_paths == prev_queued) { + + if (use_splicing) cycles_wo_finds++; else use_splicing = 1; + + } else cycles_wo_finds = 0; + + prev_queued = queued_paths; + + if (sync_id && queue_cycle == 1 && getenv("AFL_IMPORT_FIRST")) + sync_fuzzers(use_argv); + + } + + skipped_fuzz = fuzz_one(use_argv); + + if (!stop_soon && sync_id && !skipped_fuzz) { + + if (!(sync_interval_cnt++ % SYNC_INTERVAL)) + sync_fuzzers(use_argv); + + } + + if (!stop_soon && exit_1) stop_soon = 2; + + if (stop_soon) break; + + queue_cur = queue_cur->next; + current_entry++; + + } + + if (queue_cur) show_stats(); + + /* If we stopped programmatically, we kill the forkserver and the current runner. + If we stopped manually, this is done by the signal handler. */ + if (stop_soon == 2) { + if (child_pid > 0) kill(child_pid, SIGKILL); + if (forksrv_pid > 0) kill(forksrv_pid, SIGKILL); + } + /* Now that we've killed the forkserver, we wait for it to be able to get rusage stats. */ + if (waitpid(forksrv_pid, NULL, 0) <= 0) { + WARNF("error waitpid\n"); + } + + write_bitmap(); + write_stats_file(0, 0, 0); + save_auto(); + +stop_fuzzing: + + SAYF(CURSOR_SHOW cLRD "\n\n+++ Testing aborted %s +++\n" cRST, + stop_soon == 2 ? "programmatically" : "by user"); + + /* Running for more than 30 minutes but still doing first cycle? */ + + if (queue_cycle == 1 && get_cur_time() - start_time > 30 * 60 * 1000) { + + SAYF("\n" cYEL "[!] " cRST + "Stopped during the first cycle, results may be incomplete.\n" + " (For info on resuming, see %s/README.)\n", doc_path); + + } + + fclose(plot_file); + destroy_queue(); + destroy_extras(); + ck_free(target_path); + ck_free(sync_id); + + alloc_report(); + + OKF("We're done here. Have a nice day!\n"); + + exit(0); + +} + +#endif /* !AFL_LIB */ +/* + Copyright 2013 Google LLC All rights reserved. + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at: + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + american fuzzy lop - fuzzer code + -------------------------------- + + Written and maintained by Michal Zalewski + + Forkserver design by Jann Horn + + This is the real deal: the program takes an instrumented binary and + attempts a variety of basic fuzzing tricks, paying close attention to + how they affect the execution path. + +*/ + +#define AFL_MAIN +#include "android-ashmem.h" +#define MESSAGES_TO_STDOUT + +#ifndef _GNU_SOURCE +#define _GNU_SOURCE +#endif +#define _FILE_OFFSET_BITS 64 + +#include "config.h" +#include "types.h" +#include "debug.h" +#include "alloc-inl.h" +#include "hash.h" + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#if defined(__APPLE__) || defined(__FreeBSD__) || defined (__OpenBSD__) +# include +#endif /* __APPLE__ || __FreeBSD__ || __OpenBSD__ */ + +/* For systems that have sched_setaffinity; right now just Linux, but one + can hope... */ + +#ifdef __linux__ +# define HAVE_AFFINITY 1 +#endif /* __linux__ */ + +/* A toggle to export some variables when building as a library. Not very + useful for the general public. */ + +#ifdef AFL_LIB +# define EXP_ST +#else +# define EXP_ST static +#endif /* ^AFL_LIB */ + +/* Lots of globals, but mostly for the status UI and other things where it + really makes no sense to haul them around as function parameters. */ + + +EXP_ST u8 *in_dir, /* Input directory with test cases */ + *out_file, /* File to fuzz, if any */ + *out_dir, /* Working & output directory */ + *sync_dir, /* Synchronization directory */ + *sync_id, /* Fuzzer ID */ + *use_banner, /* Display banner */ + *in_bitmap, /* Input bitmap */ + *doc_path, /* Path to documentation dir */ + *target_path, /* Path to target binary */ + *orig_cmdline; /* Original command line */ + +EXP_ST u32 exec_tmout = EXEC_TIMEOUT; /* Configurable exec timeout (ms) */ +static u32 hang_tmout = EXEC_TIMEOUT; /* Timeout used for hang det (ms) */ + +EXP_ST u64 mem_limit = MEM_LIMIT; /* Memory cap for child (MB) */ + +EXP_ST u32 cpu_to_bind = 0; /* id of free CPU core to bind */ + +static u32 stats_update_freq = 1; /* Stats update frequency (execs) */ + +EXP_ST u8 skip_deterministic, /* Skip deterministic stages? */ + force_deterministic, /* Force deterministic stages? */ + use_splicing, /* Recombine input files? */ + dumb_mode, /* Run in non-instrumented mode? */ + score_changed, /* Scoring for favorites changed? */ + kill_signal, /* Signal that killed the child */ + resuming_fuzz, /* Resuming an older fuzzing job? */ + timeout_given, /* Specific timeout given? */ + cpu_to_bind_given, /* Specified cpu_to_bind given? */ + not_on_tty, /* stdout is not a tty */ + term_too_small, /* terminal dimensions too small */ + uses_asan, /* Target uses ASAN? */ + no_forkserver, /* Disable forkserver? */ + crash_mode, /* Crash mode! Yeah! */ + in_place_resume, /* Attempt in-place resume? */ + auto_changed, /* Auto-generated tokens changed? */ + no_cpu_meter_red, /* Feng shui on the status screen */ + no_arith, /* Skip most arithmetic ops */ + shuffle_queue, /* Shuffle input queue? */ + bitmap_changed = 1, /* Time to update bitmap? */ + qemu_mode, /* Running in QEMU mode? */ + skip_requested, /* Skip request, via SIGUSR1 */ + run_over10m, /* Run time over 10 minutes? */ + persistent_mode, /* Running in persistent mode? */ + deferred_mode, /* Deferred forkserver mode? */ + fast_cal; /* Try to calibrate faster? */ + +static s32 out_fd, /* Persistent fd for out_file */ + dev_urandom_fd = -1, /* Persistent fd for /dev/urandom */ + dev_null_fd = -1, /* Persistent fd for /dev/null */ + fsrv_ctl_fd, /* Fork server control pipe (write) */ + fsrv_st_fd; /* Fork server status pipe (read) */ + +static s32 forksrv_pid, /* PID of the fork server */ + child_pid = -1, /* PID of the fuzzed program */ + out_dir_fd = -1; /* FD of the lock file */ + +EXP_ST u8* trace_bits; /* SHM with instrumentation bitmap */ + +EXP_ST u8 virgin_bits[MAP_SIZE], /* Regions yet untouched by fuzzing */ + virgin_tmout[MAP_SIZE], /* Bits we haven't seen in tmouts */ + virgin_crash[MAP_SIZE]; /* Bits we haven't seen in crashes */ + +static u8 var_bytes[MAP_SIZE]; /* Bytes that appear to be variable */ + +static s32 shm_id; /* ID of the SHM region */ + +static volatile u8 stop_soon, /* Ctrl-C pressed? */ + clear_screen = 1, /* Window resized? */ + child_timed_out; /* Traced process timed out? */ + +EXP_ST u32 queued_paths, /* Total number of queued testcases */ + queued_variable, /* Testcases with variable behavior */ + queued_at_start, /* Total number of initial inputs */ + queued_discovered, /* Items discovered during this run */ + queued_imported, /* Items imported via -S */ + queued_favored, /* Paths deemed favorable */ + queued_with_cov, /* Paths with new coverage bytes */ + pending_not_fuzzed, /* Queued but not done yet */ + pending_favored, /* Pending favored paths */ + cur_skipped_paths, /* Abandoned inputs in cur cycle */ + cur_depth, /* Current path depth */ + max_depth, /* Max path depth */ + useless_at_start, /* Number of useless starting paths */ + var_byte_count, /* Bitmap bytes with var behavior */ + current_entry, /* Current queue entry ID */ + havoc_div = 1; /* Cycle count divisor for havoc */ + +EXP_ST u64 total_crashes, /* Total number of crashes */ + unique_crashes, /* Crashes with unique signatures */ + total_tmouts, /* Total number of timeouts */ + unique_tmouts, /* Timeouts with unique signatures */ + unique_hangs, /* Hangs with unique signatures */ + total_execs, /* Total execve() calls */ + slowest_exec_ms, /* Slowest testcase non hang in ms */ + start_time, /* Unix start time (ms) */ + last_path_time, /* Time for most recent path (ms) */ + last_crash_time, /* Time for most recent crash (ms) */ + last_hang_time, /* Time for most recent hang (ms) */ + last_crash_execs, /* Exec counter at last crash */ + queue_cycle, /* Queue round counter */ + cycles_wo_finds, /* Cycles without any new paths */ + trim_execs, /* Execs done to trim input files */ + bytes_trim_in, /* Bytes coming into the trimmer */ + bytes_trim_out, /* Bytes coming outa the trimmer */ + blocks_eff_total, /* Blocks subject to effector maps */ + blocks_eff_select; /* Blocks selected as fuzzable */ + +static u32 subseq_tmouts; /* Number of timeouts in a row */ + +static u8 *stage_name = "init", /* Name of the current fuzz stage */ + *stage_short, /* Short stage name */ + *syncing_party; /* Currently syncing with... */ + +static s32 stage_cur, stage_max; /* Stage progression */ +static s32 splicing_with = -1; /* Splicing with which test case? */ + +static u32 master_id, master_max; /* Master instance job splitting */ + +static u32 syncing_case; /* Syncing with case #... */ + +static s32 stage_cur_byte, /* Byte offset of current stage op */ + stage_cur_val; /* Value used for stage op */ + +static u8 stage_val_type; /* Value type (STAGE_VAL_*) */ + +static u64 stage_finds[32], /* Patterns found per fuzz stage */ + stage_cycles[32]; /* Execs per fuzz stage */ + +static u32 rand_cnt; /* Random number counter */ + +static u64 total_cal_us, /* Total calibration time (us) */ + total_cal_cycles; /* Total calibration cycles */ + +static u64 total_bitmap_size, /* Total bit count for all bitmaps */ + total_bitmap_entries; /* Number of bitmaps counted */ + +static s32 cpu_core_count; /* CPU core count */ + +#ifdef HAVE_AFFINITY + +static s32 cpu_aff = -1; /* Selected CPU core */ + +#endif /* HAVE_AFFINITY */ + +static FILE* plot_file; /* Gnuplot output file */ + +struct queue_entry { + + u8* fname; /* File name for the test case */ + u32 len; /* Input length */ + + u8 cal_failed, /* Calibration failed? */ + trim_done, /* Trimmed? */ + was_fuzzed, /* Had any fuzzing done yet? */ + passed_det, /* Deterministic stages passed? */ + has_new_cov, /* Triggers new coverage? */ + var_behavior, /* Variable behavior? */ + favored, /* Currently favored? */ + fs_redundant; /* Marked as redundant in the fs? */ + + u32 bitmap_size, /* Number of bits set in bitmap */ + exec_cksum; /* Checksum of the execution trace */ + + u64 exec_us, /* Execution time (us) */ + handicap, /* Number of queue cycles behind */ + depth; /* Path depth */ + + u8* trace_mini; /* Trace bytes, if kept */ + u32 tc_ref; /* Trace bytes ref count */ + + struct queue_entry *next, /* Next element, if any */ + *next_100; /* 100 elements ahead */ + +}; + +static struct queue_entry *queue, /* Fuzzing queue (linked list) */ + *queue_cur, /* Current offset within the queue */ + *queue_top, /* Top of the list */ + *q_prev100; /* Previous 100 marker */ + +static struct queue_entry* + top_rated[MAP_SIZE]; /* Top entries for bitmap bytes */ + +struct extra_data { + u8* data; /* Dictionary token data */ + u32 len; /* Dictionary token length */ + u32 hit_cnt; /* Use count in the corpus */ +}; + +static struct extra_data* extras; /* Extra tokens to fuzz with */ +static u32 extras_cnt; /* Total number of tokens read */ + +static struct extra_data* a_extras; /* Automatically selected extras */ +static u32 a_extras_cnt; /* Total number of tokens available */ + +static u8* (*post_handler)(u8* buf, u32* len); + +/* Interesting values, as per config.h */ + +static s8 interesting_8[] = { INTERESTING_8 }; +static s16 interesting_16[] = { INTERESTING_8, INTERESTING_16 }; +static s32 interesting_32[] = { INTERESTING_8, INTERESTING_16, INTERESTING_32 }; + +/* Fuzzing stages */ + +enum { + /* 00 */ STAGE_FLIP1, + /* 01 */ STAGE_FLIP2, + /* 02 */ STAGE_FLIP4, + /* 03 */ STAGE_FLIP8, + /* 04 */ STAGE_FLIP16, + /* 05 */ STAGE_FLIP32, + /* 06 */ STAGE_ARITH8, + /* 07 */ STAGE_ARITH16, + /* 08 */ STAGE_ARITH32, + /* 09 */ STAGE_INTEREST8, + /* 10 */ STAGE_INTEREST16, + /* 11 */ STAGE_INTEREST32, + /* 12 */ STAGE_EXTRAS_UO, + /* 13 */ STAGE_EXTRAS_UI, + /* 14 */ STAGE_EXTRAS_AO, + /* 15 */ STAGE_HAVOC, + /* 16 */ STAGE_SPLICE +}; + +/* Stage value types */ + +enum { + /* 00 */ STAGE_VAL_NONE, + /* 01 */ STAGE_VAL_LE, + /* 02 */ STAGE_VAL_BE +}; + +/* Execution status fault codes */ + +enum { + /* 00 */ FAULT_NONE, + /* 01 */ FAULT_TMOUT, + /* 02 */ FAULT_CRASH, + /* 03 */ FAULT_ERROR, + /* 04 */ FAULT_NOINST, + /* 05 */ FAULT_NOBITS +}; + + +/* Get unix time in milliseconds */ + +static u64 get_cur_time(void) { + + struct timeval tv; + struct timezone tz; + + gettimeofday(&tv, &tz); + + return (tv.tv_sec * 1000ULL) + (tv.tv_usec / 1000); + +} + + +/* Get unix time in microseconds */ + +static u64 get_cur_time_us(void) { + + struct timeval tv; + struct timezone tz; + + gettimeofday(&tv, &tz); + + return (tv.tv_sec * 1000000ULL) + tv.tv_usec; + +} + + +/* Generate a random number (from 0 to limit - 1). This may + have slight bias. */ + +static inline u32 UR(u32 limit) { + + if (unlikely(!rand_cnt--)) { + + u32 seed[2]; + + ck_read(dev_urandom_fd, &seed, sizeof(seed), "/dev/urandom"); + + srandom(seed[0]); + rand_cnt = (RESEED_RNG / 2) + (seed[1] % RESEED_RNG); + + } + + return random() % limit; + +} + + +/* Shuffle an array of pointers. Might be slightly biased. */ + +static void shuffle_ptrs(void** ptrs, u32 cnt) { + + u32 i; + + for (i = 0; i < cnt - 2; i++) { + + u32 j = i + UR(cnt - i); + void *s = ptrs[i]; + ptrs[i] = ptrs[j]; + ptrs[j] = s; + + } + +} + + #ifdef HAVE_AFFINITY /* Build a list of processes bound to specific cores. Returns -1 if nothing @@ -3587,7 +11785,7 @@ static u8 delete_files(u8* path, u8* prefix) { /* Get the number of runnable processes, with some simple smoothing. */ - +//获取可运行进程的数量。这个函数用于获取系统上的可运行进程数，以便AFL可以调整其行为以适应系统的负载。 static double get_runnable_processes(void) { static double res; @@ -3680,7 +11878,7 @@ dir_cleanup_failed: /* Delete fuzzer output directory if we recognize it as ours, if the fuzzer is not currently running, and if the last run time isn't too great. */ - +//尝试删除输出目录。如果输出目录存在并且不包含太多数据，AFL会尝试删除它以便重新开始测试。 static void maybe_delete_out_dir(void) { FILE* f; @@ -7150,7 +15348,7 @@ static void usage(u8* argv0) { /* Prepare output directories and fds. */ - +//设置目录和文件描述符。这个函数确保所有必要的目录都存在，并且设置了一些文件描述符，以便在模糊测试过程中使用。 EXP_ST void setup_dirs_fds(void) { u8* tmp;