##############################################################
#
# This file includes all the test targets as well as all the
# non-default build rules and test recipes.
#
##############################################################

###### Additional includes that are specific to this directory ######

include $(TOOLS_ROOT)/Config/makefile.debug.rules


##############################################################
#
# Test targets
#
##############################################################

###### Place all generic definitions here ######

# This defines tests which run tools of the same name.  This is simply for convenience to avoid
# defining the test name twice (once in TOOL_ROOTS and again in TEST_ROOTS).
# Tests defined here should not be defined in TOOL_ROOTS and TEST_ROOTS.
TEST_TOOL_ROOTS :=

# This defines the tests to be run that were not already defined in TEST_TOOL_ROOTS.
TEST_ROOTS :=

# This defines the tools which will be run during the the tests, and were not already defined in
# TEST_TOOL_ROOTS.
TOOL_ROOTS :=

# This defines the static analysis tools which will be run during the the tests. They should not
# be defined in TEST_TOOL_ROOTS. If a test with the same name exists, it should be defined in
# TEST_ROOTS.
# Note: Static analysis tools are in fact executables linked with the Pin Static Analysis Library.
# This library provides a subset of the Pin APIs which allows the tool to perform static analysis
# of an application or dll. Pin itself is not used when this tool runs.
SA_TOOL_ROOTS :=

# This defines all the applications that will be run during the tests.
APP_ROOTS :=

# This defines any additional object files that need to be compiled.
OBJECT_ROOTS :=

# This defines any additional dlls (shared objects), other than the pintools, that need to be compiled.
DLL_ROOTS :=

# This defines any static libraries (archives), that need to be built.
LIB_ROOTS :=

###### Place OS-specific definitions here ######



# Linux
ifeq ($(TARGET_OS),linux)
    TEST_TOOL_ROOTS += stop-resume-when-suspended check-if-thread-stopped
    TEST_ROOTS += simple-pindb-launch pindb-start-fini pindb-noprompt-kill pindb-detach pindb-abrupt-disconnect \
                  pindb-kill-like-gdb pindb-simple-command pindb-step-custom-break pindb-simultaneous-toolbreak \
                  pindb-simultaneous-toolbreak-serialize pindb-simultaneous-toolbreak-squash pindb-invalidate-regs \
                  pindb-simultaneous-toolbreak-change pindb-simultaneous-toolbreak-step pindb-simple-simultaneous-multi \
                  pindb-simple-simultaneous-multi-serialize simple execfail fork breaktool breaktool_const_context \
                  breaktool-wait breaktool-nodebugger bp-icount action-pending thread launch-gdb stack-debugger pindb-zmm \
                  debugger-shell-breakpoints debugger-shell-tracepoints start-fini intercept-breakpoint emu-simple ymm zmm \
                  pc-change-bp pc-change-async interpreter-remove mt-exit debugger-type signal-step siginfo xmm-$(TARGET) \
                  pindb-attach-after-custom-stop allow-remote set-mode gdb-detach-reattach invalid-write bptest-$(TARGET) \
                  pindb-pthread-step-exit gdb-pthread-step-exit pindb-pthread-cont-exitgroup pindb-pthread-step-exitgroup \
                  simultaneous-toolbreak simultaneous-toolbreak-squash simultaneous-toolbreak-change \
                  simultaneous-toolbreak-attach pindb-simultaneous-multi pindb-simultaneous-multi-serialize \
                  pindb-simultaneous-toolbreak-attach launch-gdb_const_context ymm_with_set_xmm_scratch_regs_tool \
                  watchpoint_const_context simultaneous-toolbreak_const_context \
                  xmm-$(TARGET)_with_set_xmm_scratch_regs_before_breakpoint_tool \
                  xmm-$(TARGET)_with_set_xmm_scratch_regs_before_breakpoint_tool_const_context \
                  xmm-$(TARGET)_with_set_xmm_scratch_regs_before_breakpoint_tool_and_set_xmm_reg \
                  app-pause-in-app-thread app-pause-in-int-thread bphandler gdb-svr4-libraries-extension simple-pindb-attach
    TOOL_ROOTS += stack-debugger start-fini-callback simple-command-tool use-debugger-shell simultaneous-toolbreak \
                  breaktool int3-count action-pending-tool checkpoint watchpoint launch-gdb-tool intercept-tool \
                  pc-change-async-tool interpreter-remove mt-exit-tool debugger-type set-mode-tool invalidate-regs \
                  set_xmm_scratches set_xmm_scratches_before_breakpoint set_xmm_scratches_before_breakpoint_and_set_xmm_reg \
                  set_xmm_scratches_for_ymmtest null-emulator-$(TARGET) \
                  app-pause-in-app-thread-tool app-pause-in-int-thread-tool library-load-tool
    APP_ROOTS += simple-pindb simple simple-static exec fork action-pending-app thread checkpoint-app bptest-$(TARGET) \
                 watchpoint-app callerapp fibonacci sleep-unix intercept-app pc-change-bp pc-change-async xmm-$(TARGET) \
                 mt-exit signal-catch reattach-loop pthread-bare-exit pthread-bare-exitgroup thread-$(OS_TYPE) \
                 ymm-$(TARGET) zmm-$(TARGET) debugger-shell-app-$(TARGET) app-pause-app pick-random-port bphandler_app \
                 dlopen-dlclose
    OBJECT_ROOTS += simple-pindb-asm-$(TARGET) zmm-asm-$(TARGET)
    ifeq ($(TARGET),ia32)
        TEST_ROOTS += access-64-on-32
    endif

    ifeq ($(shell $(TOOLS_ROOT)/Utils/testStaticLibs), 1)
        TEST_ROOTS := $(filter-out bp-icount, $(TEST_ROOTS))
        TOOL_ROOTS := $(filter-out int3-count, $(TOOL_ROOTS))
        APP_ROOTS := $(filter-out simple-static, $(APP_ROOTS))
    endif

    # see mantis 4779 debugger update caused 32 bit to fail on ubuntu 18.04
    # threrefore we filter them till debugger is fixed
    FILTER_DEBUG_32BIT := 0
    ifeq ($(TARGET),ia32)
      ifeq ($(DIST_NAME_UBUNTU),1)
        FILTER_DEBUG_32BIT := $(shell $(TOOLS_ROOT)/Utils/testLinuxDistVersion eq 18.04)
      endif
    endif
    ifeq ($(FILTER_DEBUG_32BIT),1)
        TEST_ROOTS := $(filter-out action-pending allow-remote bphandler bptest-ia32 breaktool_const_context breaktool-wait breaktool \
                                   debugger-shell-breakpoints debugger-shell-tracepoints emu-simple execfail fork gdb-detach-reattach \
                                   gdb-pthread-step-exit intercept-breakpoint pc-change-async pc-change-bp set-mode siginfo signal-step simple \
                                   simultaneous-toolbreak_const_context simultaneous-toolbreak-change simultaneous-toolbreak-squash \
                                   simultaneous-toolbreak stack-debugger thread watchpoint_const_context \
                                   xmm-ia32_with_set_xmm_scratch_regs_before_breakpoint_tool_and_set_xmm_reg \
                                   xmm-ia32_with_set_xmm_scratch_regs_before_breakpoint_tool_const_context \
                                   xmm-ia32_with_set_xmm_scratch_regs_before_breakpoint_tool xmm-ia32 \
                                   ymm_with_set_xmm_scratch_regs_tool ymm zmm , $(TEST_ROOTS))
    endif 
endif

# macOS*
ifeq ($(TARGET_OS),mac)
    TEST_ROOTS += app-pause-in-app-thread app-pause-in-int-thread \
                  simple-pindb-launch pindb-start-fini pindb-noprompt-kill pindb-detach pindb-abrupt-disconnect \
                  pindb-kill-like-gdb pindb-simple-command pindb-step-custom-break pindb-simultaneous-toolbreak \
                  pindb-simultaneous-toolbreak-serialize pindb-simultaneous-toolbreak-squash pindb-invalidate-regs \
                  pindb-simultaneous-toolbreak-change pindb-simultaneous-toolbreak-step pindb-simple-simultaneous-multi \
                  pindb-simple-simultaneous-multi-serialize pindb-pthread-step-exit pindb-pthread-cont-exitgroup \
                  pindb-pthread-step-exitgroup pindb-simultaneous-multi pindb-simultaneous-multi-serialize pindb-zmm \
                  simple execfail fork breaktool bphandler stack-debugger debugger-type simple-pindb-attach
# pindb-attach-after-custom-stop pindb-simultaneous-toolbreak-attach
    TOOL_ROOTS += app-pause-in-app-thread-tool app-pause-in-int-thread-tool default_mac_tool simple-command-tool \
                  invalidate-regs use-debugger-shell breaktool bphandler stack-debugger debugger-type
    APP_ROOTS += app-pause-app simple simple-pindb thread-$(OS_TYPE) pthread-bare-exit pthread-bare-exitgroup \
    			 zmm-$(TARGET) bphandler_app fibonacci
    OBJECT_ROOTS += simple-pindb-asm-$(TARGET) zmm-asm-$(TARGET)
endif

# Windows
ifeq ($(TARGET_OS),windows)
    TEST_TOOL_ROOTS += stop-resume-when-suspended check-if-thread-stopped
    TEST_ROOTS += simple-pindb-launch pindb-start-fini pindb-noprompt-kill pindb-detach pindb-abrupt-disconnect \
                  pindb-kill-like-gdb pindb-simple-command pindb-step-custom-break pindb-simultaneous-toolbreak \
                  pindb-simultaneous-toolbreak-serialize pindb-simultaneous-toolbreak-squash pindb-invalidate-regs \
                  pindb-simultaneous-toolbreak-change pindb-simultaneous-toolbreak-step pindb-simple-simultaneous-multi \
                  pindb-simple-simultaneous-multi-serialize pindb-win-unhandled-exception pindb-win-handled-exception \
                  pindb-win-continued-exception1 pindb-win-continued-exception2 pindb-win-software-exception \
                  pindb-win-cpp-exception pindb-win-squash-exception pindb-win-step-exception pindb-zmm \
                  pindb-win-library-notifications pindb-win-step-library pindb-win-thread-stress \
                  pindb-win-exception-after-exit app-pause-in-app-thread app-pause-in-int-thread simple-pindb-attach
    TOOL_ROOTS += stack-debugger start-fini-callback simple-command-tool use-debugger-shell simultaneous-toolbreak \
                  invalidate-regs app-pause-in-app-thread-tool app-pause-in-int-thread-tool
    APP_ROOTS += simple-pindb simple win-unhandled-exception win-handled-exception win-continued-exception1 \
                 win-continued-exception2 win-software-exception win-cpp-exception win-load-library \
                 win-thread-stress thread-$(OS_TYPE) app-pause-app win-exception-after-exit zmm-$(TARGET)
    OBJECT_ROOTS += simple-pindb-asm-$(TARGET) win-foo-library zmm-asm-$(TARGET)
    DLL_ROOTS += win-foo-library win-exception-after-exit-dll
    ifeq ($(TARGET),ia32)
        TEST_ROOTS += access-64-on-32
    endif
endif

###### Handle exceptions here ######


ifeq ($(TARGET_OS),windows)
    # This test is disabled until Mantis 1839 is fixed.
    TEST_ROOTS := $(filter-out simple-pindb-attach, $(TEST_ROOTS))
    # This test is disabled until Mantis 4566 is fixed
    TEST_TOOL_ROOTS := $(filter-out stop-resume-when-suspended, $(TEST_TOOL_ROOTS))
endif

# There is a bug with PinADX when using early-injection (the default) on 32-bit applications when running
# on a 64-bit host and when using versions of Windows earlier than Vista.  That bug causes this test to
# fail, so we disable it in this case.  We can re-enable this test when Mantis #2385 is fixed.
#
osname := $(shell uname -s)
ifeq ($(findstring CYGWIN_NT-5,$(osname))-$(HOST_ARCH)-$(TARGET),CYGWIN_NT-5-intel64-ia32)
    TEST_ROOTS := $(filter-out pindb-start-fini, $(TEST_ROOTS))
endif

ifeq ($(TARGET_OS),linux)
    GDB_VERSION_IF_BEFORE_66 := $(shell $(TOOLS_ROOT)/Utils/testToolVersion $(GDB) le 6.6)
    GDB_VERSION_IF_BEFORE_74 := $(shell $(TOOLS_ROOT)/Utils/testToolVersion $(GDB) le 7.4)
    GDB_VERSION_IF_BEFORE_80 := $(shell $(TOOLS_ROOT)/Utils/testToolVersion $(GDB) le 8.0)
    ifeq ($(GDB_VERSION_IF_BEFORE_66),1)
#   Versions of gdb older than 6.6 do not understand the XMM registers, so disable the xmm tests.
#
        TEST_ROOTS := $(filter-out xmm-$(TARGET) xmm-$(TARGET)_with_set_xmm_scratch_regs_before_breakpoint_tool \
                                   xmm-$(TARGET)_with_set_xmm_scratch_regs_before_breakpoint_tool_const_context \
                                   xmm-$(TARGET)_with_set_xmm_scratch_regs_before_breakpoint_tool_and_set_xmm_reg, \
                                   $(TEST_ROOTS))
        TOOL_ROOTS := $(filter-out set_xmm_scratches_before_breakpoint \
                                   set_xmm_scratches_before_breakpoint_and_set_xmm_reg set_xmm_scratches, $(TOOL_ROOTS))
        APP_ROOTS := $(filter-out xmm-$(TARGET), $(APP_ROOTS))
    endif
    ifeq ($(GDB_VERSION_IF_BEFORE_74),1)
#   Versions of gdb older than 7.4 do not understand svr4 libraries query
#
        TEST_ROOTS := $(filter-out gdb-svr4-libraries-extension, $(TEST_ROOTS))
        TOOL_ROOTS := $(filter-out library-load-tool, $(TOOL_ROOTS))
        APP_ROOTS := $(filter-out dlopen-dlclose, $(APP_ROOTS))
    endif
    ifeq ($(GDB_VERSION_IF_BEFORE_80),1)
#   Versions of gdb older than 8.0 do not support AVX512 registers
#
        TEST_ROOTS := $(filter-out zmm, $(TEST_ROOTS))
    endif
endif

ifeq ($(TARGET_OS),linux)
    # See mantis 4613
    TEST_ROOTS := $(filter-out gdb-svr4-libraries-extension, $(TEST_ROOTS))
    
    SKIP_DBG_TESTS = 0
    ifeq ($(TARGET),ia32)
        ifeq ($(DIST_NAME_RHEL),1)
            DIST_VER_GE_75 := $(shell $(TOOLS_ROOT)/Utils/testLinuxDistVersion ge 7.5)
            ifeq ($(DIST_VER_GE_75),1)
                SKIP_DBG_TESTS = 1
            endif
        endif
        ifeq ($(DIST_NAME_CENTOS),1)
            # In CentOS 7.8, VERSION has a value of 7 and not 7.8
            DIST_VER_GE_7 := $(shell $(TOOLS_ROOT)/Utils/testLinuxDistVersion ge 7)
            ifeq ($(DIST_VER_GE_7),1)
                SKIP_DBG_TESTS = 1
            endif
        endif
    endif
            
    ifeq ($(SKIP_DBG_TESTS),1)
        # Disable 32 bit tests on rhel7.5 & rhel7.6 & rhel7.8, Centos7.8 - see mantis 4677
        TEST_ROOTS := $(filter-out action-pending allow-remote bphandler bptest-ia32 breaktool_const_context \
                          breaktool-wait breaktool debugger-shell-breakpoints debugger-shell-tracepoints execfail fork \
                          gdb-detach-reattach gdb-pthread-step-exit intercept-breakpoint invalid-write pc-change-async \
                          pc-change-bp set-mode siginfo signal-step simple simultaneous-toolbreak_const_context \
                          simultaneous-toolbreak-change simultaneous-toolbreak-squash simultaneous-toolbreak \
                          stack-debugger thread watchpoint_const_context \
                          xmm-ia32_with_set_xmm_scratch_regs_before_breakpoint_tool_and_set_xmm_reg \
                          xmm-ia32_with_set_xmm_scratch_regs_before_breakpoint_tool_const_context \
                          xmm-ia32_with_set_xmm_scratch_regs_before_breakpoint_tool xmm-ia32 \
                          ymm_with_set_xmm_scratch_regs_tool ymm pindb-simultaneous-toolbreak, $(TEST_ROOTS))
    endif
endif

# See mantis 4570
ifeq ($(TARGET_OS),windows)
    TEST_ROOTS := $(filter-out pindb-zmm, $(TEST_ROOTS))
endif

# see mantis 4821
ifeq ($(TARGET_OS),linux)
    ifeq ($(DIST_NAME_UBUNTU),1)
        DIST_VER_GE_1910 := $(shell $(TOOLS_ROOT)/Utils/testLinuxDistVersion ge 19.10)
        ifeq ($(DIST_VER_GE_1910),1)
            TEST_ROOTS := $(filter-out bphandler fork gdb-detach-reattach, $(TEST_ROOTS))
            APP_ROOTS := $(filter-out bphandler_app, $(APP_ROOTS))
        endif
    endif
endif

ifeq ($(TARGET_OS),mac)
    # See mantis 4602
    TEST_ROOTS := $(filter-out pindb-invalidate-regs, $(TEST_ROOTS))
endif

###### Define the sanity subset ######

# This defines the list of tests that should run in sanity. It should include all the tests listed in
# TEST_TOOL_ROOTS and TEST_ROOTS excluding only unstable tests.
SANITY_SUBSET := $(TEST_TOOL_ROOTS) $(TEST_ROOTS)

ifeq ($(TARGET_OS),mac)
    # See mantis 4598
    SANITY_SUBSET := $(filter-out pindb-simultaneous-toolbreak pindb-simultaneous-toolbreak-serialize \
                                  pindb-simultaneous-toolbreak-squash pindb-simultaneous-toolbreak-change \
                                  pindb-simultaneous-toolbreak-step, $(SANITY_SUBSET))

    # See mantis 4679
    SANITY_SUBSET := $(filter-out pindb-simultaneous-multi-serialize, $(SANITY_SUBSET))
endif


##############################################################
#
# Test recipes
#
##############################################################

# This section contains recipes for tests other than the default.
# See makefile.default.rules for the default test rules.
# All tests in this section should adhere to the naming convention: <testname>.test

# This is a time limit (in seconds) we use for some of the tests below.  It's intentionally high
# to avoid timeouts when the system load is very high, which can happen in our nightly tests.
#

TLIMIT := 120

ifeq ($(TARGET_OS),mac)
    BATCH_CMD_CONNECT_REMOTE :=gdb-remote
    BATCH_CMD_TIMEOUT_LIMIT:=
    DBG:=lldb
    DBG_STR:=$(DBG)
    DBG_CMD_SRC_FLAG:=-s
    DBG_CMD_MORE_FLAGS:=-x --batch
    DEFAULT_TOOL:=$(OBJDIR)default_mac_tool$(PINTOOL_SUFFIX)
    PIN_CMD_DEFAULT_TOOL:= -t $(DEFAULT_TOOL)
    COMPARE_RE_FILE_SUFFIX:=.lldb 
endif
ifeq ($(TARGET_OS),linux)
    BATCH_CMD_CONNECT_REMOTE :=target remote
    BATCH_CMD_TIMEOUT_LIMIT:= set remotetimeout $(TLIMIT)
    DBG:=$(GDB)
    DBG_STR:=gdb
    DBG_CMD_SRC_FLAG=-x
    DBG_CMD_MORE_FLAGS:=-n -batch
    COMPARE_RE_FILE_SUFFIX:=
endif

# This is the example tool from the manual run such that you can attach the debugger after it triggers a stack
# breakpoint.
#
stack-debugger-late.test: $(OBJDIR)fibonacci$(EXE_SUFFIX) $(OBJDIR)stack-debugger$(PINTOOL_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.toolout)
	$(PIN) $(PINFLAGS_DEBUG_RUNFREE) -appdebug_silent -t $(OBJDIR)stack-debugger$(PINTOOL_SUFFIX) \
	  -stackbreak 4000 -o $(OBJDIR)$(@:.test=.toolout) -timeout $(TLIMIT) \
	    -- $(OBJDIR)fibonacci$(EXE_SUFFIX) 1000 > $(OBJDIR)$(@:.test=.out) &
	count=0; \
	until $(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.toolout) > /dev/null 2>&1 || $(BASHTEST) $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done
	echo '$(BATCH_CMD_TIMEOUT_LIMIT)' > $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.toolout) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	cat $(@:.test=.$(DBG_STR)) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)fibonacci$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.$(DBG_STR)out) 2>&1
	$(PYCOMPARE) -p $(@:.test=.compare$(COMPARE_RE_FILE_SUFFIX)) -c $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(RM) -f $(OBJDIR)$(@:.test=.toolout) $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(OBJDIR)$(@:.test=.$(DBG_STR)out)

# Basic test of debugger features.
#
simple.test: $(OBJDIR)simple$(EXE_SUFFIX) $(DEFAULT_TOOL)
	$(RM) -f $(OBJDIR)$(@:.test=.out)
	$(PIN) $(PINFLAGS_DEBUG) $(PIN_CMD_DEFAULT_TOOL) -- $(OBJDIR)simple$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.out) &
	count=0; \
	until $(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) > /dev/null || $(BASHTEST) $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done
	echo '$(BATCH_CMD_TIMEOUT_LIMIT)' > $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	cat $(@:.test=.$(DBG_STR)) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)simple$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(PYCOMPARE) -p $(@:.test=.compare$(COMPARE_RE_FILE_SUFFIX)) -c $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(OBJDIR)$(@:.test=.$(DBG_STR)out)

# Basic test for breakpoint handling features.
#
bphandler.test: $(OBJDIR)bphandler$(PINTOOL_SUFFIX) $(OBJDIR)bphandler_app$(EXE_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.out)
	$(PIN) $(PINFLAGS_DEBUG) -t $(OBJDIR)bphandler$(PINTOOL_SUFFIX) -- $(OBJDIR)bphandler_app$(EXE_SUFFIX) > \
      $(OBJDIR)$(@:.test=.out) &
	count=0; \
	until $(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) > /dev/null || $(BASHTEST) $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done
	echo '$(BATCH_CMD_TIMEOUT_LIMIT)' > $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	cat $(@:.test=.$(DBG_STR)) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)bphandler_app$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(PYCOMPARE) -p $(@:.test=.compare$(COMPARE_RE_FILE_SUFFIX)) -c $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(OBJDIR)$(@:.test=.$(DBG_STR)out)

# Verify we can debug across a failed exec() call.
#
execfail.test: $(OBJDIR)exec$(EXE_SUFFIX) $(DEFAULT_TOOL)
	$(RM) -f $(OBJDIR)$(@:.test=.out)
	$(PIN) $(PINFLAGS_DEBUG) -follow_execv $(PIN_CMD_DEFAULT_TOOL) -- $(OBJDIR)exec$(EXE_SUFFIX) ./does-not-exist > $(OBJDIR)$(@:.test=.out) &
	count=0; \
	until $(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) > /dev/null || $(BASHTEST) $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done
	echo '$(BATCH_CMD_TIMEOUT_LIMIT)' > $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	cat $(@:.test=.$(DBG_STR)) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)exec$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(PYCOMPARE) -p $(@:.test=.compare$(COMPARE_RE_FILE_SUFFIX)) -c $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(OBJDIR)$(@:.test=.$(DBG_STR)out)

# Verify we can debug across a parent call to fork().
#
fork.test: $(OBJDIR)fork$(EXE_SUFFIX) $(DEFAULT_TOOL)
	$(RM) -f $(OBJDIR)$(@:.test=.out)
	$(PIN) $(PINFLAGS_DEBUG) $(PIN_CMD_DEFAULT_TOOL) -- $(OBJDIR)fork$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.out) &
	count=0; \
	until $(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) > /dev/null || $(BASHTEST) $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done
	echo '$(BATCH_CMD_TIMEOUT_LIMIT)' > $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	cat $(@:.test=.$(DBG_STR)) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)fork$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(PYCOMPARE) -p $(@:.test=.compare$(COMPARE_RE_FILE_SUFFIX)) -c $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(OBJDIR)$(@:.test=.$(DBG_STR)out)

# Basic test of PIN_ApplicationBreakpoint()
#
breaktool.test: $(OBJDIR)simple$(EXE_SUFFIX) $(OBJDIR)breaktool$(PINTOOL_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.out)
	$(PIN) $(PINFLAGS_DEBUG) -t $(OBJDIR)breaktool$(PINTOOL_SUFFIX) -wait_for_debugger 0 \
	  -- $(OBJDIR)simple$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.out) &
	count=0; \
	until $(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) > /dev/null || $(BASHTEST) $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done
	echo '$(BATCH_CMD_TIMEOUT_LIMIT)' > $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	cat $(@:.test=.$(DBG_STR)) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)simple$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.$(DBG_STR)out) 2>&1
	$(PYCOMPARE) -p $(@:.test=.compare$(COMPARE_RE_FILE_SUFFIX)) -c $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(OBJDIR)$(@:.test=.$(DBG_STR)out)

breaktool_const_context.test: $(OBJDIR)simple$(EXE_SUFFIX) $(OBJDIR)breaktool$(PINTOOL_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.out)
	$(PIN) $(PINFLAGS_DEBUG) -t $(OBJDIR)breaktool$(PINTOOL_SUFFIX) -wait_for_debugger 0 -const_context 1 \
	  -- $(OBJDIR)simple$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.out) &
	count=0; \
	until $(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) > /dev/null || $(BASHTEST) $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done
	echo '$(BATCH_CMD_TIMEOUT_LIMIT)' > $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	cat $(@:.test=.$(DBG_STR)) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)simple$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.$(DBG_STR)out) 2>&1
	$(PYCOMPARE) -p $(@:.test=.compare$(COMPARE_RE_FILE_SUFFIX)) -c $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(OBJDIR)$(@:.test=.$(DBG_STR)out)

# Verify that PIN_ApplicationBreakpoint(.., TRUE, ..) will wait if there's no debugger.
#
breaktool-wait.test: $(OBJDIR)simple$(EXE_SUFFIX) $(OBJDIR)breaktool$(PINTOOL_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.out)
	$(PIN) $(PINFLAGS_DEBUG_RUNFREE) \
	  -t $(OBJDIR)breaktool$(PINTOOL_SUFFIX) -wait_for_debugger 1 -port $(OBJDIR)$(@:.test=.out) \
	    -- $(OBJDIR)simple$(EXE_SUFFIX) &
	count=0; \
	until $(BASHTEST) -s $(OBJDIR)$(@:.test=.out) -o $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done
	sleep 5
	echo '$(BATCH_CMD_TIMEOUT_LIMIT)' > $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	port=`cat $(OBJDIR)$(@:.test=.out)`; echo "target remote :$$port" >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	cat $(@:.test=.$(DBG_STR)) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)simple$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.$(DBG_STR)out) 2>&1
	$(PYCOMPARE) -p $(@:.test=.compare$(COMPARE_RE_FILE_SUFFIX)) -c $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(OBJDIR)$(@:.test=.$(DBG_STR)out)

# Verify that PIN_ApplicationBreakpoint(.., FALSE, ..) does not wait if there's no debugger.
#
breaktool-nodebugger.test: $(OBJDIR)simple$(EXE_SUFFIX) $(OBJDIR)breaktool$(PINTOOL_SUFFIX)
	$(PIN) $(PINFLAGS_DEBUG_RUNFREE) -t $(OBJDIR)breaktool$(PINTOOL_SUFFIX) -wait_for_debugger 0 \
	  -- $(OBJDIR)simple$(EXE_SUFFIX)

# Test breakpoints in various circumstances.
#
bptest-$(TARGET).test: $(OBJDIR)bptest-$(TARGET)$(EXE_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.out)
	$(PIN) $(PINFLAGS_DEBUG) -- $(OBJDIR)bptest-$(TARGET)$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.out) &
	count=0; \
	until $(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) > /dev/null || $(BASHTEST) $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done
	echo '$(BATCH_CMD_TIMEOUT_LIMIT)' > $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	cat $(@:.test=.$(DBG_STR)) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)bptest-$(TARGET)$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.$(DBG_STR)out) 2>&1
	$(PYCOMPARE) -p $(@:.test=.)$(COMPARE_EXT) -c $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(OBJDIR)$(@:.test=.$(DBG_STR)out)

# Test that breakpoints do not cause the tool to see any extra instructions (e.g. INT3).
#
bp-icount.test: $(OBJDIR)simple-static$(EXE_SUFFIX) $(OBJDIR)int3-count$(PINTOOL_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.out)
	$(PIN) -t $(OBJDIR)int3-count$(PINTOOL_SUFFIX) -func main -o $(OBJDIR)bp-icount.reference \
	  -- $(OBJDIR)simple-static$(EXE_SUFFIX)
	$(PIN) $(PINFLAGS_DEBUG) -t $(OBJDIR)int3-count$(PINTOOL_SUFFIX) -func main -o $(OBJDIR)bp-icount.count \
	  -- $(OBJDIR)simple-static$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.out) &
	count=0; \
	until $(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) > /dev/null || $(BASHTEST) $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done
	echo '$(BATCH_CMD_TIMEOUT_LIMIT)' > $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	cat $(@:.test=.$(DBG_STR)) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)simple-static$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.$(DBG_STR)out) 2>&1
	$(PYCOMPARE) -p $(@:.test=.compare$(COMPARE_RE_FILE_SUFFIX)) -c $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(CMP) $(OBJDIR)bp-icount.reference $(OBJDIR)bp-icount.count
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(OBJDIR)$(@:.test=.$(DBG_STR)out)

# Test the PIN_IsActionPending() API.
#
action-pending.test: $(OBJDIR)action-pending-app$(EXE_SUFFIX) $(OBJDIR)action-pending-tool$(PINTOOL_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.out)
	$(PIN) $(PINFLAGS_DEBUG) -t $(OBJDIR)action-pending-tool$(PINTOOL_SUFFIX) \
	  -- $(OBJDIR)action-pending-app$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.out) &
	count=0; \
	until $(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) > /dev/null || $(BASHTEST) $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done
	echo '$(BATCH_CMD_TIMEOUT_LIMIT)' > $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	cat $(@:.test=.$(DBG_STR)) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)action-pending-app$(EXE_SUFFIX) \
	  > $(OBJDIR)$(@:.test=.$(DBG_STR)out) 2>&1
	$(PYCOMPARE) -p $(@:.test=.compare$(COMPARE_RE_FILE_SUFFIX)) -c $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(OBJDIR)$(@:.test=.$(DBG_STR)out)

# Test that we can print out XMM registers.  Older GDB's don't know how to print XMM registers well,
# so use a modern GDB for this test.
#
# We first test that GDB itself will run.  If not, we just skip the body of this test.  The modern
# GDB won't run on some old test systems.
#
xmm-$(TARGET).test: $(OBJDIR)xmm-$(TARGET)$(EXE_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.out)
	$(PIN) $(PINFLAGS_DEBUG) -- $(OBJDIR)xmm-$(TARGET)$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.out) &
	count=0; \
	until $(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) > /dev/null || $(BASHTEST) $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done
	echo '$(BATCH_CMD_TIMEOUT_LIMIT)' > $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	cat $(@:.test=.$(DBG_STR)) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)xmm-$(TARGET)$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.$(DBG_STR)out) 2>&1
	$(PYCOMPARE) -p $(@:.test=.compare$(COMPARE_RE_FILE_SUFFIX)) -c $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(OBJDIR)$(@:.test=.$(DBG_STR)out)

xmm-$(TARGET)_with_set_xmm_scratch_regs_before_breakpoint_tool.test: $(OBJDIR)set_xmm_scratches_before_breakpoint$(PINTOOL_SUFFIX) $(OBJDIR)xmm-$(TARGET)$(EXE_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.out)
	$(PIN) $(PINFLAGS_DEBUG) -t $(OBJDIR)set_xmm_scratches_before_breakpoint$(PINTOOL_SUFFIX) \
	  -output_filename $(OBJDIR)set_xmm_scratches_before_breakpoint.out \
	    -- $(OBJDIR)xmm-$(TARGET)$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.out) &
	count=0; \
	until $(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) > /dev/null || test $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done
	echo '$(BATCH_CMD_TIMEOUT_LIMIT)' > $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	cat $(@:.test=.$(DBG_STR)) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)xmm-$(TARGET)$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.$(DBG_STR)out) 2>&1
	$(QGREP) "$$1 = 0x[0]*3f800000" $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(QGREP) "$$2 = 0x[0]*40000000" $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(QGREP) "$$3 = 0xff00ff000a550a55123456789abcdef0" $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(QGREP) "exited normally." $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(QGREP) "instrumented the movdqa" $(OBJDIR)set_xmm_scratches_before_breakpoint.out
	$(QGREP) "did setApplicationBreakpoint" $(OBJDIR)set_xmm_scratches_before_breakpoint.out
	$(QGREP) "regular_context" $(OBJDIR)set_xmm_scratches_before_breakpoint.out
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(RM) -f $(OBJDIR)set_xmm_scratches_before_breakpoint.out

xmm-$(TARGET)_with_set_xmm_scratch_regs_before_breakpoint_tool_const_context.test: $(OBJDIR)set_xmm_scratches_before_breakpoint$(PINTOOL_SUFFIX) $(OBJDIR)xmm-$(TARGET)$(EXE_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.out)
	$(PIN)  $(PINFLAGS_DEBUG) -t $(OBJDIR)set_xmm_scratches_before_breakpoint$(PINTOOL_SUFFIX) \
	  -output_filename $(OBJDIR)set_xmm_scratches_before_breakpoint_const_context.out -const_context 1 \
	    -- $(OBJDIR)xmm-$(TARGET)$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.out) &
	count=0; \
	until $(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) > /dev/null || test $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done
	echo '$(BATCH_CMD_TIMEOUT_LIMIT)' > $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	cat $(@:.test=.$(DBG_STR)) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)xmm-$(TARGET)$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.$(DBG_STR)out) 2>&1
	$(QGREP) "$$1 = 0x[0]*3f800000" $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(QGREP) "$$2 = 0x[0]*40000000" $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(QGREP) "$$3 = 0xff00ff000a550a55123456789abcdef0" $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(QGREP) "exited normally." $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(QGREP) "instrumented the movdqa" $(OBJDIR)set_xmm_scratches_before_breakpoint_const_context.out
	$(QGREP) "did setApplicationBreakpoint" $(OBJDIR)set_xmm_scratches_before_breakpoint_const_context.out
	$(QGREP) "const_context" $(OBJDIR)set_xmm_scratches_before_breakpoint_const_context.out
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(RM) -f $(OBJDIR)set_xmm_scratches_before_breakpoint_const_context.out

xmm-$(TARGET)_with_set_xmm_scratch_regs_before_breakpoint_tool_and_set_xmm_reg.test: $(OBJDIR)set_xmm_scratches_before_breakpoint_and_set_xmm_reg$(PINTOOL_SUFFIX) $(OBJDIR)xmm-$(TARGET)$(EXE_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.out)
	$(PIN)  $(PINFLAGS_DEBUG) -t $(OBJDIR)set_xmm_scratches_before_breakpoint_and_set_xmm_reg$(PINTOOL_SUFFIX) \
	  -output_filename $(OBJDIR)set_xmm_scratch_regs_before_breakpoint_tool_set_xmm_reg.out \
	    -- $(OBJDIR)xmm-$(TARGET)$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.out) &
	count=0; \
	until $(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) > /dev/null || test $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done
	echo '$(BATCH_CMD_TIMEOUT_LIMIT)' > $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	cat $(@:.test=.$(DBG_STR)) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)xmm-$(TARGET)$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.$(DBG_STR)out) 2>&1
	$(QGREP) "$$1 = 0x[0]*3f800000" $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(QGREP) "$$2 = 0x[0]*40000000" $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(QGREP) "$$3 = 0xff00ff000a550a55123456789abcdef0" $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(QGREP) "$$4 = 0x5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a" $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(QGREP) "exited normally." $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(QGREP) "instrumented the movdqa" $(OBJDIR)set_xmm_scratch_regs_before_breakpoint_tool_set_xmm_reg.out
	$(QGREP) "tool got the expected gdb command" $(OBJDIR)set_xmm_scratch_regs_before_breakpoint_tool_set_xmm_reg.out
	$(QGREP) "tool properly set xmm3" $(OBJDIR)set_xmm_scratch_regs_before_breakpoint_tool_set_xmm_reg.out
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(RM) -f $(OBJDIR)set_xmm_scratch_regs_before_breakpoint_tool_set_xmm_reg.out

xmm-$(TARGET)_with_set_xmm_scratch_regs_tool.test: $(OBJDIR)set_xmm_scratches$(PINTOOL_SUFFIX) $(OBJDIR)xmm-$(TARGET)$(EXE_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.out)
	$(PIN)  $(PINFLAGS_DEBUG) -t $(OBJDIR)set_xmm_scratches$(PINTOOL_SUFFIX) \
	  -output_filename $(OBJDIR)set_xmm_scratches.out \
	    -- $(OBJDIR)xmm-$(TARGET)$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.out) &
	count=0; \
	until $(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) > /dev/null || test $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done
	echo '$(BATCH_CMD_TIMEOUT_LIMIT)' > $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	cat $(@:.test=.$(DBG_STR)) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)xmm-$(TARGET)$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.$(DBG_STR)out) 2>&1
	$(PYCOMPARE) -p $(@:.test=.compare$(COMPARE_RE_FILE_SUFFIX)) -c $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(QGREP) instrumented $(OBJDIR)set_xmm_scratches.out
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(RM) -f $(OBJDIR)set_xmm_scratches.out

# Simple test of a threaded program.
#
thread.test: $(OBJDIR)thread$(EXE_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.out)
	$(PIN) $(PINFLAGS_DEBUG) -- $(OBJDIR)thread$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.out) &
	count=0; \
	until $(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) > /dev/null || $(BASHTEST) $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done
	echo '$(BATCH_CMD_TIMEOUT_LIMIT)' > $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	cat thread.$(DBG_STR) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)thread$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.$(DBG_STR)out) 2>&1
	$(PYCOMPARE) -p thread.compare -c $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(OBJDIR)$(@:.test=.$(DBG_STR)out)

# Simple test of a threaded program built statically (uses non-nptl thread package on Linux).
# NOTE: This test is disabled, so it does not run automatically.  Modern versions of GDB do not
#   support non-nptl threads well.
#
thread-static.test: $(OBJDIR)thread-static$(EXE_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.out)
	$(PIN) $(PINFLAGS_DEBUG) -- $(OBJDIR)thread-static$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.out) &
	count=0; \
	until $(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) > /dev/null || $(BASHTEST) $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done
	echo '$(BATCH_CMD_TIMEOUT_LIMIT)' > $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	cat thread.$(DBG_STR) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)thread-static$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.$(DBG_STR)out) 2>&1
	$(PYCOMPARE) -p thread.compare -c $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(OBJDIR)$(@:.test=.$(DBG_STR)out)

# Simple test of the 'pindb' debugger.  We launch Pin separatly and pindb attaches.
#
simple-pindb-attach.test: $(OBJDIR)simple-pindb$(EXE_SUFFIX) $(OBJDIR)stack-debugger$(PINTOOL_SUFFIX)
	$(OBJDIR)simple-pindb$(EXE_SUFFIX) basic $(OBJDIR)$(@:.test=.pindbin) $(OBJDIR)$(@:.test=.compare)
	$(PYTHON) launch-pin-attach-debugger.py --pin=$(BARE_PIN) --pin-exe=$(BARE_PIN) \
	    --pindb=$(PINDB) --pindb-libpath=$(PINDB_LIBPATH) \
	    --tool=$(OBJDIR)stack-debugger$(PINTOOL_SUFFIX) --app=$(OBJDIR)simple-pindb$(EXE_SUFFIX) \
	    --cpu=$(TARGET) --timeout=$(TLIMIT) \
	    --pin-out=$(OBJDIR)$(@:.test=.out) --pindb-in=$(OBJDIR)$(@:.test=.pindbin) \
	    --pindb-out=$(OBJDIR)$(@:.test=.pindbout)
	$(PYCOMPARE) -p $(OBJDIR)$(@:.test=.compare) -c $(OBJDIR)$(@:.test=.pindbout)
	$(RM) -f $(OBJDIR)$(@:.test=.pindbin) $(OBJDIR)$(@:.test=.compare) $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.pindbout)

# Simple test of the 'pindb' debugger.  We use the pindb "run" command to launch and attach to pin.
#
simple-pindb-launch.test: $(OBJDIR)simple-pindb$(EXE_SUFFIX) $(OBJDIR)stack-debugger$(PINTOOL_SUFFIX)
	$(OBJDIR)simple-pindb$(EXE_SUFFIX) basic $(OBJDIR)$(@:.test=.pindbin.0) $(OBJDIR)$(@:.test=.compare)
	echo "set pinargs $(PIN_USERFLAGS) -t $(OBJDIR)stack-debugger$(PINTOOL_SUFFIX)" > $(OBJDIR)$(@:.test=.pindbin)
	echo "run $(OBJDIR)simple-pindb$(EXE_SUFFIX)" >> $(OBJDIR)$(@:.test=.pindbin)
	cat $(OBJDIR)$(@:.test=.pindbin.0) >> $(OBJDIR)$(@:.test=.pindbin)
	$(PINDB_WITH_LIBPATH) --pin=$(BARE_PIN) --timeout=$(TLIMIT) --cpu=$(TARGET) --noprompt \
	    $(PINDB_USERFLAGS) < $(OBJDIR)$(@:.test=.pindbin) > $(OBJDIR)$(@:.test=.pindbout)
	$(PYCOMPARE) -p $(OBJDIR)$(@:.test=.compare) -c $(OBJDIR)$(@:.test=.pindbout)
	$(RM) -f $(OBJDIR)$(@:.test=.pindbin.0) $(OBJDIR)$(@:.test=.compare) $(OBJDIR)$(@:.test=.pindbout) \
	      $(OBJDIR)$(@:.test=.pindbin)

# Test the checkpoint tool.
#
checkpoint.test: $(OBJDIR)checkpoint-app$(EXE_SUFFIX) $(OBJDIR)checkpoint$(PINTOOL_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.out)
	$(PIN) $(PINFLAGS_DEBUG) -t $(OBJDIR)checkpoint$(PINTOOL_SUFFIX) \
	  -- $(OBJDIR)checkpoint-app$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.out) &
	count=0; \
	until $(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) > /dev/null || $(BASHTEST) $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done
	echo '$(BATCH_CMD_TIMEOUT_LIMIT)' > $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	cat $(@:.test=.$(DBG_STR)) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)checkpoint-app$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.$(DBG_STR)out) 2>&1
	$(PYCOMPARE) -p checkpoint-gdb.compare -c $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(PYCOMPARE) -p checkpoint-app.compare -c $(OBJDIR)$(@:.test=.out)
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(OBJDIR)$(@:.test=.$(DBG_STR)out)

# Test the watchpoint tool.
#
watchpoint.test: $(OBJDIR)watchpoint-app$(EXE_SUFFIX) $(OBJDIR)watchpoint$(PINTOOL_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.out)
	$(OBJDIR)watchpoint-app 1 > $(OBJDIR)$(@:.test=.$(DBG_STR))
	$(PIN) $(PINFLAGS_DEBUG) -t $(OBJDIR)watchpoint$(PINTOOL_SUFFIX) \
	  -- $(OBJDIR)watchpoint-app$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.out) &
	count=0; \
	until $(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) > /dev/null || $(BASHTEST) $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done
	echo '$(BATCH_CMD_TIMEOUT_LIMIT)' > $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	cat $(OBJDIR)$(@:.test=.$(DBG_STR)) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)watchpoint-app$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.$(DBG_STR)out) 2>&1
	$(PYCOMPARE) -p $(@:.test=.compare$(COMPARE_RE_FILE_SUFFIX)) -c $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(OBJDIR)$(@:.test=.$(DBG_STR)out) $(OBJDIR)$(@:.test=.$(DBG_STR))

watchpoint_const_context.test: $(OBJDIR)watchpoint-app$(EXE_SUFFIX) $(OBJDIR)watchpoint$(PINTOOL_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.out)
	$(OBJDIR)watchpoint-app$(EXE_SUFFIX) 1 > $(OBJDIR)$(@:.test=.$(DBG_STR))
	$(PIN) $(PINFLAGS_DEBUG) -t $(OBJDIR)watchpoint$(PINTOOL_SUFFIX) -const_context 1 \
	  -- $(OBJDIR)watchpoint-app$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.out) &
	count=0; \
	until $(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) > /dev/null || test $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done
	echo '$(BATCH_CMD_TIMEOUT_LIMIT)' > $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	cat $(OBJDIR)$(@:.test=.$(DBG_STR)) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)watchpoint-app$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.$(DBG_STR)out) 2>&1
	$(PYCOMPARE) -p $(@:.test=.compare$(COMPARE_RE_FILE_SUFFIX)) -c $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(OBJDIR)$(@:.test=.$(DBG_STR)out) $(OBJDIR)$(@:.test=.$(DBG_STR))

# This test starts Pin with debugger support enabled, but Pin does not stop at
# the first instruction waiting for a debugger to attach.  Instead, the
# application runs under Pin immediately.  Later, if the tool finds something
# interesting, it can ask the user (or a GUI shell) to start the debugger and
# attach at the interesting point.
#
launch-gdb.test: $(OBJDIR)callerapp$(EXE_SUFFIX) $(OBJDIR)launch-gdb-tool$(PINTOOL_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(PIN) $(PINFLAGS_DEBUG_RUNFREE) -t $(OBJDIR)launch-gdb-tool$(PINTOOL_SUFFIX) -timeout $(TLIMIT) \
	  -o $(OBJDIR)$(@:.test=.$(DBG_STR)in) -- $(OBJDIR)callerapp$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.out) &
	count=0; \
	until $(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.$(DBG_STR)in) > /dev/null 2>&1 || $(BASHTEST) $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done
	cat $(@:.test=.$(DBG_STR)) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)callerapp$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.$(DBG_STR)out) 2>&1
	$(PYCOMPARE) -p $(@:.test=.compare$(COMPARE_RE_FILE_SUFFIX)) -c $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(OBJDIR)$(@:.test=.$(DBG_STR)out)

# This tests the -appdebug_server_port <PORT> option of PIN.
# We pick an available TCP port randomly, then we run PIN with -appdebug_server_port specifying the random port
# We expect to connect with GDB to the port we specified
#
gdb-fixed-port.test: $(OBJDIR)callerapp$(EXE_SUFFIX) $(OBJDIR)launch-gdb-tool$(PINTOOL_SUFFIX) $(OBJDIR)pick-random-port$(EXE_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(OBJDIR)pick-random-port$(EXE_SUFFIX) unused > $(OBJDIR)$(@:.test=.random)
	$(PIN) $(PINFLAGS_DEBUG_RUNFREE) -appdebug_server_port `cat $(OBJDIR)$(@:.test=.random)` -t $(OBJDIR)launch-gdb-tool$(PINTOOL_SUFFIX) -timeout $(TLIMIT) \
	  -o $(OBJDIR)$(@:.test=.$(DBG_STR)in) -- $(OBJDIR)callerapp$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.out) &
	count=0; \
	until $(GREP) 'target remote :'`cat $(OBJDIR)$(@:.test=.random)` $(OBJDIR)$(@:.test=.$(DBG_STR)in) > /dev/null 2>&1 || $(BASHTEST) $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done
	cat $(@:.test=.$(DBG_STR)) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)callerapp$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.$(DBG_STR)out) 2>&1
	$(PYCOMPARE) -p $(@:.test=.compare$(COMPARE_RE_FILE_SUFFIX)) -c $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(OBJDIR)$(@:.test=.$(DBG_STR)out)

# This tests the -appdebug_server_port <PORT> option of PIN when we.
# provide a port which is already taken by another application
# We expect PIN to fail because it won't acquire the port
#
gdb-fixed-port-used.test: $(OBJDIR)callerapp$(EXE_SUFFIX) $(OBJDIR)launch-gdb-tool$(PINTOOL_SUFFIX) $(OBJDIR)pick-random-port$(EXE_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(OBJDIR)pick-random-port$(EXE_SUFFIX) used > $(OBJDIR)$(@:.test=.random)
	! ( $(PIN) $(PINFLAGS_DEBUG_RUNFREE) -appdebug_server_port `cat $(OBJDIR)$(@:.test=.random)` -t $(OBJDIR)launch-gdb-tool$(PINTOOL_SUFFIX) \
	    -timeout $(TLIMIT) -o $(OBJDIR)$(@:.test=.$(DBG_STR)in) -- $(OBJDIR)callerapp$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.out) )
	$(QGREP) "E:Unable to create debugger connection" $(OBJDIR)$(@:.test=.out)
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(OBJDIR)$(@:.test=.random)

# This tests the -appdebug_server_port <PORT> option of PIN when we
# provide an invalid TCP port number.
# We expect PIN to fail because the TCP port number is invalid
#
gdb-fixed-bad-port.test: $(OBJDIR)callerapp$(EXE_SUFFIX) $(OBJDIR)launch-gdb-tool$(PINTOOL_SUFFIX) $(OBJDIR)pick-random-port$(EXE_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	! ( $(PIN) $(PINFLAGS_DEBUG_RUNFREE) -appdebug_server_port 100000 -t $(OBJDIR)launch-gdb-tool$(PINTOOL_SUFFIX) \
	    -timeout $(TLIMIT) -o $(OBJDIR)$(@:.test=.$(DBG_STR)in) -- $(OBJDIR)callerapp$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.out) )
	$(QGREP) "E:Invalid TCP server port: 100000" $(OBJDIR)$(@:.test=.out)
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.$(DBG_STR)in)

launch-gdb_const_context.test: $(OBJDIR)callerapp$(EXE_SUFFIX) $(OBJDIR)launch-gdb-tool$(PINTOOL_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(PIN) $(PINFLAGS_DEBUG_RUNFREE) -t $(OBJDIR)launch-gdb-tool$(PINTOOL_SUFFIX) -const_context 1 -timeout $(TLIMIT) \
	  -o $(OBJDIR)$(@:.test=.$(DBG_STR)in) -- $(OBJDIR)callerapp$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.out) &
	count=0; \
	until $(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.$(DBG_STR)in) > /dev/null 2>&1 || test $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done
	cat $(@:.test=.$(DBG_STR)) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)callerapp$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.$(DBG_STR)out) 2>&1
	$(PYCOMPARE) -p $(@:.test=.compare$(COMPARE_RE_FILE_SUFFIX)) -c $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(OBJDIR)$(@:.test=.$(DBG_STR)out)

# This is the example tool we describe in the manual, which demonstrates the major features
# of the application-level debugging API.  The tool tracks the application's stack usage
# and allows breakpoints to be set when the stack usage crosses a threshold.
#
stack-debugger.test: $(OBJDIR)fibonacci$(EXE_SUFFIX) $(OBJDIR)stack-debugger$(PINTOOL_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.out)
	$(PIN) $(PINFLAGS_DEBUG) -t $(OBJDIR)stack-debugger$(PINTOOL_SUFFIX) \
	  -- $(OBJDIR)fibonacci$(EXE_SUFFIX) 1000 > $(OBJDIR)$(@:.test=.out) &
	count=0; \
	until $(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) > /dev/null || $(BASHTEST) $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done
	echo '$(BATCH_CMD_TIMEOUT_LIMIT)' > $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	cat $(@:.test=.$(DBG_STR)) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)fibonacci$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.$(DBG_STR)out) 2>&1
	$(PYCOMPARE) -p $(@:.test=.compare$(COMPARE_RE_FILE_SUFFIX)) -c $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(OBJDIR)$(@:.test=.$(DBG_STR)out)

# Test that we can asynchronously stop the target in PinDB by sending CTRL-C (SIGINT).
# TODO: This is disabled until Mantis #2055 is fixed.
#
pindb-async-stop.test: $(OBJDIR)sleep-unix$(EXE_SUFFIX)
	echo "set pinargs $(PIN_USERFLAGS)" > $(OBJDIR)$(@:.test=.pindbin)
	echo "run $(OBJDIR)sleep-unix$(EXE_SUFFIX)" >> $(OBJDIR)$(@:.test=.pindbin)
	cat $(@:.test=.pindb) >> $(OBJDIR)$(@:.test=.pindbin)
	$(PINDB_WITH_LIBPATH) --pin=$(BARE_PIN) --timeout=$(TLIMIT) --cpu=$(TARGET) --noprompt \
	    $(PINDB_USERFLAGS) < $(OBJDIR)$(@:.test=.pindbin) > $(OBJDIR)$(@:.test=.pindbout) & \
	    pid=$$!; \
	    sleep 2; \
	    while kill -INT $$pid > /dev/null 2>&1; \
	    do \
	        sleep 2; \
	    done; \
	    wait
	$(RM) -f $(OBJDIR)$(@:.test=.pindbin) $(OBJDIR)$(@:.test=.pindbout)

# Test of breakpoint commands in the "debugger-shell" instrumentation library.
#
debugger-shell-breakpoints.test: $(OBJDIR)debugger-shell-app-$(TARGET)$(EXE_SUFFIX) $(OBJDIR)use-debugger-shell$(PINTOOL_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.out)
	$(OBJDIR)debugger-shell-app-$(TARGET)$(EXE_SUFFIX) breakpoints $(OBJDIR)$(@:.test=.$(DBG_STR)in.0) $(OBJDIR)$(@:.test=.compare)
	$(PIN) $(PINFLAGS_DEBUG) -t $(OBJDIR)use-debugger-shell$(PINTOOL_SUFFIX) \
	  -- $(OBJDIR)debugger-shell-app-$(TARGET)$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.out) &
	count=0; \
	until $(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) > /dev/null || $(BASHTEST) $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done
	echo '$(BATCH_CMD_TIMEOUT_LIMIT)' > $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	cat $(OBJDIR)$(@:.test=.$(DBG_STR)in.0) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)debugger-shell-app-$(TARGET)$(EXE_SUFFIX) \
	  > $(OBJDIR)$(@:.test=.$(DBG_STR)out) 2>&1
	$(PYCOMPARE) -p $(OBJDIR)$(@:.test=.compare) -c $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.$(DBG_STR)in.0) $(OBJDIR)$(@:.test=.compare) \
	      $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(OBJDIR)$(@:.test=.$(DBG_STR)out)

# Test of tracepoint commands in the "debugger-shell" instrumentation library.
#
debugger-shell-tracepoints.test: $(OBJDIR)debugger-shell-app-$(TARGET)$(EXE_SUFFIX) $(OBJDIR)use-debugger-shell$(PINTOOL_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.out)
	$(OBJDIR)debugger-shell-app-$(TARGET)$(EXE_SUFFIX) tracepoints $(OBJDIR)$(@:.test=.$(DBG_STR)in.0) $(OBJDIR)$(@:.test=.compare)
	$(PIN) $(PINFLAGS_DEBUG) -t $(OBJDIR)use-debugger-shell$(PINTOOL_SUFFIX) \
	  -- $(OBJDIR)debugger-shell-app-$(TARGET)$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.out) &
	count=0; \
	until $(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) > /dev/null || $(BASHTEST) $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done
	echo '$(BATCH_CMD_TIMEOUT_LIMIT)' > $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	cat $(OBJDIR)$(@:.test=.$(DBG_STR)in.0) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)debugger-shell-app-$(TARGET)$(EXE_SUFFIX) \
	  > $(OBJDIR)$(@:.test=.$(DBG_STR)out) 2>&1
	$(PYCOMPARE) -p $(OBJDIR)$(@:.test=.compare) -c $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.$(DBG_STR)in.0) $(OBJDIR)$(@:.test=.compare) \
	      $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(OBJDIR)$(@:.test=.$(DBG_STR)out)

# Test that the thread-start, thread-fini, and fini call-backs are correctly called even when GDB
# immediately terminates the application .
#
start-fini.test: $(OBJDIR)start-fini-callback$(PINTOOL_SUFFIX) $(OBJDIR)simple$(EXE_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.out)
	$(PIN) $(PINFLAGS_DEBUG) -t $(OBJDIR)start-fini-callback$(PINTOOL_SUFFIX) -o $(OBJDIR)$(@:.test=.toolout) \
	  -- $(OBJDIR)simple$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.out) & \
	    count=0; \
	    until $(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) > /dev/null || $(BASHTEST) $$count -gt $(TLIMIT); \
	        do sleep 1; count=`expr $$count + 1`; done; \
	    echo '$(BATCH_CMD_TIMEOUT_LIMIT)' > $(OBJDIR)$(@:.test=.$(DBG_STR)in); \
	    $(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in); \
	    cat quit.$(DBG_STR) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in); \
	    $(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)simple$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.$(DBG_STR)out) 2>&1; \
	wait
	$(CMP) start-fini.reference $(OBJDIR)$(@:.test=.toolout)
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.toolout) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(OBJDIR)$(@:.test=.$(DBG_STR)out)

# Test that the thread-start, thread-fini, and fini call-backs are correctly called when PinDB
# immediately terminates the application (tested on both Linux and Windows).
#
pindb-start-fini.test: $(OBJDIR)start-fini-callback$(PINTOOL_SUFFIX) $(OBJDIR)simple$(EXE_SUFFIX)
	echo "set pinargs $(PIN_USERFLAGS) -t $(OBJDIR)start-fini-callback$(PINTOOL_SUFFIX) \
	    -o $(OBJDIR)$(@:.test=.toolout)" > $(OBJDIR)$(@:.test=.pindbin)
	echo "run $(OBJDIR)simple$(EXE_SUFFIX)" >> $(OBJDIR)$(@:.test=.pindbin)
	cat $(@:.test=.pindb) >> $(OBJDIR)$(@:.test=.pindbin)
	$(PINDB_WITH_LIBPATH) --pin=$(BARE_PIN) --timeout=$(TLIMIT) --cpu=$(TARGET) --noprompt \
	    $(PINDB_USERFLAGS) < $(OBJDIR)$(@:.test=.pindbin) > $(OBJDIR)$(@:.test=.pindbout)
	$(DIFF) start-fini.reference $(OBJDIR)$(@:.test=.toolout)
	$(SYNC)
	$(RM) -f $(OBJDIR)$(@:.test=.toolout) $(OBJDIR)$(@:.test=.pindbin) $(OBJDIR)$(@:.test=.pindbout)

stop-resume-when-suspended.test: $(OBJDIR)stop-resume-when-suspended$(PINTOOL_SUFFIX) $(OBJDIR)simple$(EXE_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.toolout) $(OBJDIR)$(@:.test=.pindbin) $(OBJDIR)$(@:.test=.pindbout)
	echo "set pinargs $(PIN_USERFLAGS) -t $(OBJDIR)stop-resume-when-suspended$(PINTOOL_SUFFIX) \
	    -o $(OBJDIR)$(@:.test=.toolout)" > $(OBJDIR)$(@:.test=.pindbin)
	echo "run $(OBJDIR)simple$(EXE_SUFFIX)" >> $(OBJDIR)$(@:.test=.pindbin)
	cat $(@:.test=.pindb) >> $(OBJDIR)$(@:.test=.pindbin)
	$(PINDB_WITH_LIBPATH) --pin=$(BARE_PIN) --timeout=$(TLIMIT) --cpu=$(TARGET) --noprompt \
	    $(PINDB_USERFLAGS) < $(OBJDIR)$(@:.test=.pindbin) > $(OBJDIR)$(@:.test=.pindbout)
	sleep 5
	$(DIFF) stop-resume-when-suspended.reference $(OBJDIR)$(@:.test=.toolout)
	$(QGREP) "Sum is 55" $(OBJDIR)$(@:.test=.pindbout)
	$(RM) -f $(OBJDIR)$(@:.test=.toolout) $(OBJDIR)$(@:.test=.pindbin) $(OBJDIR)$(@:.test=.pindbout)

# Verify that PIN_InterceptDebuggingEvent() can intercept and squash breakpoints.
#
intercept-breakpoint.test: $(OBJDIR)intercept-app$(EXE_SUFFIX) $(OBJDIR)intercept-tool$(PINTOOL_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.out)
	$(PIN) $(PINFLAGS_DEBUG) -t $(OBJDIR)intercept-tool$(PINTOOL_SUFFIX) \
	  -- $(OBJDIR)intercept-app$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.out) &
	count=0; \
	until $(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) > /dev/null || $(BASHTEST) $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done
	echo '$(BATCH_CMD_TIMEOUT_LIMIT)' > $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	cat $(@:.test=.$(DBG_STR)) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)intercept-app$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.$(DBG_STR)out) 2>&1
	$(PYCOMPARE) -p $(@:.test=-gdb.compare$(COMPARE_RE_FILE_SUFFIX)) -c $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(PYCOMPARE) -p $(@:.test=-app.compare$(COMPARE_RE_FILE_SUFFIX)) -c $(OBJDIR)$(@:.test=.out)
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(OBJDIR)$(@:.test=.$(DBG_STR)out)

# Test the PIN_AddDebuggerRegisterEmulator() API.  This test is legal to run with any version of GDB,
# but it only tests the API well when run with a GDB that supports register extensions in the XML
# "feature document".  This includes GDB 7.2 and later, and a few special earlier distributions.
#
emu-simple.test: $(OBJDIR)simple$(EXE_SUFFIX) $(OBJDIR)null-emulator-$(TARGET)$(PINTOOL_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.out)
	$(PIN) $(PINFLAGS_DEBUG) -t $(OBJDIR)null-emulator-$(TARGET)$(PINTOOL_SUFFIX) \
	  -- $(OBJDIR)simple$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.out) &
	count=0; \
	until $(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) > /dev/null || $(BASHTEST) $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done
	echo '$(BATCH_CMD_TIMEOUT_LIMIT)' > $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	cat simple.$(DBG_STR) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)simple$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(PYCOMPARE) -p simple.compare -c $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(OBJDIR)$(@:.test=.$(DBG_STR)out)

# Verify that the debugger can print the value of a YMM register when running on native AVX hardware.
# This test will pass even when run on non-AVX hardware.  However, it's only effective when run on
# AVX hardware and when run with a GDB that supports AVX.
#
ymm.test: $(OBJDIR)ymm-$(TARGET)$(EXE_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.out)
	$(PIN) $(PINFLAGS_DEBUG) -- $(OBJDIR)ymm-$(TARGET)$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.out) &
	count=0; \
	until $(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) > /dev/null || $(BASHTEST) $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done
	echo '$(BATCH_CMD_TIMEOUT_LIMIT)' > $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	cat $(@:.test=.$(DBG_STR)) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)ymm-$(TARGET)$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.$(DBG_STR)out) 2>&1
	$(PYCOMPARE) -p $(@:.test=.compare$(COMPARE_RE_FILE_SUFFIX)) -c $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(OBJDIR)$(@:.test=.$(DBG_STR)out)

ymm_with_set_xmm_scratch_regs_tool.test: $(OBJDIR)set_xmm_scratches_for_ymmtest$(PINTOOL_SUFFIX) $(OBJDIR)ymm-$(TARGET)$(EXE_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.out)
	$(PIN) $(PINFLAGS_DEBUG) -t $(OBJDIR)set_xmm_scratches_for_ymmtest$(PINTOOL_SUFFIX) \
	  -- $(OBJDIR)ymm-$(TARGET)$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.out) &
	count=0; \
	until $(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) > /dev/null || test $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done
	echo '$(BATCH_CMD_TIMEOUT_LIMIT)' > $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	cat $(@:.test=.$(DBG_STR)) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)ymm-$(TARGET)$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.$(DBG_STR)out) 2>&1
	$(PYCOMPARE) -p $(@:.test=.compare$(COMPARE_RE_FILE_SUFFIX)) -c $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	sleep 5
	cat set_xmm_scratches_for_ymmtest.out
	$(QGREP) instrumented set_xmm_scratches_for_ymmtest.out
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(RM) -f instrumented set_xmm_scratches_for_ymmtest.out

# Verify that the debugger can print the value of a ZMM register when running on native AVX512 hardware.
# This test will pass even when run on non-AVX512 hardware.  However, it's only effective when run on
# AVX512 hardware and when run with a GDB that supports AVX512.
#
zmm.test: $(OBJDIR)zmm-$(TARGET)$(EXE_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.out)
	$(PIN) $(PINFLAGS_DEBUG) -- $(OBJDIR)zmm-$(TARGET)$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.out) &
	count=0; \
	until $(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) > /dev/null || $(BASHTEST) $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done
	echo '$(BATCH_CMD_TIMEOUT_LIMIT)' > $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	cat $(@:.test=.$(DBG_STR)) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	-$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)zmm-$(TARGET)$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	if ! $(QGREP) "HandleSigill" $(OBJDIR)$(@:.test=.$(DBG_STR)out) ; then \
	  $(PYCOMPARE) -p $(@:.test=.compare$(COMPARE_RE_FILE_SUFFIX)) -c $(OBJDIR)$(@:.test=.$(DBG_STR)out); \
	fi
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(OBJDIR)$(@:.test=.$(DBG_STR)out)

pindb-zmm.test: $(OBJDIR)zmm-$(TARGET)$(EXE_SUFFIX)
	echo "set pinargs " > $(OBJDIR)$(@:.test=.pindbin)
	echo "run $(OBJDIR)zmm-$(TARGET)$(EXE_SUFFIX)" >> $(OBJDIR)$(@:.test=.pindbin)
	cat $(@:.test=.pindb) >> $(OBJDIR)$(@:.test=.pindbin)
	$(PINDB_WITH_LIBPATH) --pin=$(BARE_PIN) --timeout=$(TLIMIT) --cpu=$(TARGET) --noprompt \
	    $(PINDB_USERFLAGS) < $(OBJDIR)$(@:.test=.pindbin) > $(OBJDIR)$(@:.test=.pindbout)
	if ! $(QGREP) "Processor does not support AVX512" $(OBJDIR)$(@:.test=.pindbout) ; then \
	  $(PYCOMPARE) -p $(@:.test=.compare) -c $(OBJDIR)$(@:.test=.pindbout); \
	fi
	$(RM) -f $(OBJDIR)$(@:.test=.pindbin) $(OBJDIR)$(@:.test=.pindbout)

# Verify that the debugger change the the PC when stopped after an indirect JMP instruction.
#
pc-change-bp.test: $(OBJDIR)pc-change-bp$(EXE_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.out)
	$(PIN) $(PINFLAGS_DEBUG) -- $(OBJDIR)pc-change-bp$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.out) &
	count=0; \
	until $(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) > /dev/null || $(BASHTEST) $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done
	echo '$(BATCH_CMD_TIMEOUT_LIMIT)' > $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	cat $(@:.test=.$(DBG_STR)) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)pc-change-bp$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(PYCOMPARE) -p $(@:.test=.compare$(COMPARE_RE_FILE_SUFFIX)) -c $(OBJDIR)$(@:.test=.out)
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(OBJDIR)$(@:.test=.$(DBG_STR)out)

# Verify that the tool can change the PC from an ASYNC_BREAK intercept function when the thread
# is stopped after an indirect JMP instruction.
#
pc-change-async.test: $(OBJDIR)pc-change-async$(EXE_SUFFIX) $(OBJDIR)pc-change-async-tool$(PINTOOL_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.out)
	$(PIN) $(PINFLAGS_DEBUG) -t $(OBJDIR)pc-change-async-tool$(PINTOOL_SUFFIX) \
	  -- $(OBJDIR)pc-change-async$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.out) &
	count=0; \
	until $(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) > /dev/null || $(BASHTEST) $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done
	echo '$(BATCH_CMD_TIMEOUT_LIMIT)' > $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	cat $(@:.test=.$(DBG_STR)) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)pc-change-async$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(PYCOMPARE) -p $(@:.test=.compare$(COMPARE_RE_FILE_SUFFIX)) -c $(OBJDIR)$(@:.test=.out)
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(OBJDIR)$(@:.test=.$(DBG_STR)out)

# Test the PIN_RemoveDebugInterpreter() API.
#
interpreter-remove.test: $(OBJDIR)interpreter-remove$(PINTOOL_SUFFIX) $(OBJDIR)simple$(EXE_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.out)
	$(PIN) -appdebug -t $(OBJDIR)interpreter-remove$(PINTOOL_SUFFIX) -- $(OBJDIR)simple$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.out) &
	count=0; \
	until $(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) > /dev/null || $(BASHTEST) $$count -gt $(TLIMIT); \
	  do sleep 1; count=`expr $$count + 1`; done
	echo '$(BATCH_CMD_TIMEOUT_LIMIT)' > $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	echo 'monitor bdio' >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	echo 'c' >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)simple$(EXE_SUFFIX) > /dev/null 2>&1
	! $(GREP) 'PIN_RemoveDebugInterpreter failed' $(OBJDIR)$(@:.test=.out) > /dev/null
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.$(DBG_STR)in)

# Verify that GDB can terminate an application where one thread is blocked in
# a system call.  Previously, the Pin process would sometimes hang when this
# happened, so the test checks that the process exits.  (Note, "kill -s 0 <pid>"
# just checks if a process exists, it doesn't send a signal.)
#
mt-exit.test: $(OBJDIR)mt-exit$(EXE_SUFFIX) $(OBJDIR)mt-exit-tool$(PINTOOL_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.toolout)
	$(PIN) $(PINFLAGS_DEBUG) -t $(OBJDIR)mt-exit-tool$(PINTOOL_SUFFIX) -o $(OBJDIR)$(@:.test=.toolout) \
	  -- $(OBJDIR)mt-exit$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.out) &
	count=0; \
	until $(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) > /dev/null || $(BASHTEST) $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done
	echo '$(BATCH_CMD_TIMEOUT_LIMIT)' > $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	cat $(@:.test=.$(DBG_STR)) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)mt-exit$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	pid=`cat $(OBJDIR)$(@:.test=.toolout)`; \
	count=0; \
	until ! kill -s 0 $$pid > /dev/null 2>&1 || $(BASHTEST) $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done; \
	$(BASHTEST) $$count -le $(TLIMIT)
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(OBJDIR)$(@:.test=.$(DBG_STR)out) $(OBJDIR)$(@:.test=.toolout)

# Simple test of the PIN_GetDebuggerType() API.
#
debugger-type.test: $(OBJDIR)simple$(EXE_SUFFIX) $(OBJDIR)debugger-type$(PINTOOL_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.out)
	$(PIN) $(PINFLAGS_DEBUG) -t $(OBJDIR)debugger-type$(PINTOOL_SUFFIX) \
	  -- $(OBJDIR)simple$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.out) &
	count=0; \
	until $(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) > /dev/null || $(BASHTEST) $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done
	echo '$(BATCH_CMD_TIMEOUT_LIMIT)' > $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	cat $(@:.test=.$(DBG_STR)) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)simple$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(GREP) -i 'Debugger Type is $(DBG_STR)' $(OBJDIR)$(@:.test=.out) > /dev/null
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(OBJDIR)$(@:.test=.$(DBG_STR)out)

# Test that we can single-step into a signal handler.
#
signal-step.test: $(OBJDIR)signal-catch$(EXE_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.out)
	$(PIN) $(PINFLAGS_DEBUG) -- $(OBJDIR)signal-catch$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.out) &
	count=0; \
	until $(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) > /dev/null || $(BASHTEST) $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done
	echo '$(BATCH_CMD_TIMEOUT_LIMIT)' > $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	cat $(@:.test=.$(DBG_STR)) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)signal-catch$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(PYCOMPARE) -p $(@:.test=.compare$(COMPARE_RE_FILE_SUFFIX)) -c $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(OBJDIR)$(@:.test=.$(DBG_STR)out)

# Test that GDB can print $_siginfo and get the signal information structure from Pin.
#
siginfo.test: $(OBJDIR)signal-catch$(EXE_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.out)
	$(PIN) $(PINFLAGS_DEBUG) -- $(OBJDIR)signal-catch$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.out) &
	count=0; \
	until $(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) > /dev/null || $(BASHTEST) $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done
	echo '$(BATCH_CMD_TIMEOUT_LIMIT)' > $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	cat $(@:.test=.$(DBG_STR)) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)signal-catch$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(PYCOMPARE) -p $(@:.test=.compare$(COMPARE_RE_FILE_SUFFIX)) -c $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(OBJDIR)$(@:.test=.$(DBG_STR)out)

# Test that PinDB can attach after the Pin tool has stopped at a custom breakpoint and that PinDB
# can still get the tool's custom stop message (see Mantis #2357).
#
# This is disabled on Windows, but it could probably be enabled there when Mantis #1839 is fixed.
#
pindb-attach-after-custom-stop.test: $(OBJDIR)simple$(EXE_SUFFIX) $(OBJDIR)breaktool$(PINTOOL_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.out)
	$(PIN) $(PINFLAGS_DEBUG_RUNFREE) \
	  -t $(OBJDIR)breaktool$(PINTOOL_SUFFIX) -where main -wait_for_debugger 1 -port $(OBJDIR)$(@:.test=.port) \
	    -- $(OBJDIR)simple$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.out) &
	count=0; \
	until $(GREP) 'Tool stopping at breakpoint' $(OBJDIR)$(@:.test=.out) > /dev/null || $(BASHTEST) $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done
	$(PINDB_WITH_LIBPATH) --pin=$(BARE_PIN) --timeout=$(TLIMIT) --cpu=$(TARGET) --noprompt \
	    --gdb-protocol=:`cat $(OBJDIR)$(@:.test=.port)` $(PINDB_USERFLAGS) < $(@:.test=.pindbin) > \
	    $(OBJDIR)$(@:.test=.pindbout)
	$(PYCOMPARE) -p $(@:.test=.compare) -c $(OBJDIR)$(@:.test=.pindbout)
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.port) $(OBJDIR)$(@:.test=.pindbout)

# Test Windows unhandled exception with PinDB.
#
pindb-win-unhandled-exception.test: $(OBJDIR)win-unhandled-exception$(EXE_SUFFIX)
	echo "set pinargs $(PIN_USERFLAGS)" > $(OBJDIR)$(@:.test=.pindbin)
	echo "run $(OBJDIR)win-unhandled-exception$(EXE_SUFFIX)" >> $(OBJDIR)$(@:.test=.pindbin)
	cat $(@:.test=.pindb) >> $(OBJDIR)$(@:.test=.pindbin)
	$(PINDB_WITH_LIBPATH) --pin=$(BARE_PIN) --timeout=$(TLIMIT) --cpu=$(TARGET) --noprompt \
	    $(PINDB_USERFLAGS) < $(OBJDIR)$(@:.test=.pindbin) > $(OBJDIR)$(@:.test=.pindbout)
	$(PYCOMPARE) -p $(@:.test=.compare) -c $(OBJDIR)$(@:.test=.pindbout)
	$(RM) -f $(OBJDIR)$(@:.test=.pindbin) $(OBJDIR)$(@:.test=.pindbout)

# Test Windows handled exception with PinDB.
#
pindb-win-handled-exception.test: $(OBJDIR)win-handled-exception$(EXE_SUFFIX)
	echo "set pinargs $(PIN_USERFLAGS)" > $(OBJDIR)$(@:.test=.pindbin)
	echo "run $(OBJDIR)win-handled-exception$(EXE_SUFFIX)" >> $(OBJDIR)$(@:.test=.pindbin)
	cat $(@:.test=.pindb) >> $(OBJDIR)$(@:.test=.pindbin)
	$(PINDB_WITH_LIBPATH) --pin=$(BARE_PIN) --timeout=$(TLIMIT) --cpu=$(TARGET) --noprompt \
	    $(PINDB_USERFLAGS) < $(OBJDIR)$(@:.test=.pindbin) > $(OBJDIR)$(@:.test=.pindbout)
	$(PYCOMPARE) -p $(@:.test=.compare) -c $(OBJDIR)$(@:.test=.pindbout)
	$(RM) -f $(OBJDIR)$(@:.test=.pindbin) $(OBJDIR)$(@:.test=.pindbout)

# Test Windows continued exception with PinDB.  The exception filter continues the search.
pindb-win-continued-exception1.test: $(OBJDIR)win-continued-exception1$(EXE_SUFFIX)
	echo "set pinargs $(PIN_USERFLAGS)" > $(OBJDIR)$(@:.test=.pindbin)
	echo "run $(OBJDIR)win-continued-exception1$(EXE_SUFFIX)" >> $(OBJDIR)$(@:.test=.pindbin)
	cat $(@:.test=.pindb) >> $(OBJDIR)$(@:.test=.pindbin)
	$(PINDB_WITH_LIBPATH) --pin=$(BARE_PIN) --timeout=$(TLIMIT) --cpu=$(TARGET) --noprompt \
	    $(PINDB_USERFLAGS) < $(OBJDIR)$(@:.test=.pindbin) > $(OBJDIR)$(@:.test=.pindbout)
	$(PYCOMPARE) -p $(@:.test=.compare) -c $(OBJDIR)$(@:.test=.pindbout)
	$(RM) -f $(OBJDIR)$(@:.test=.pindbin) $(OBJDIR)$(@:.test=.pindbout)

# Test Windows continued exception with PinDB.  The exception filter executes the handler.
pindb-win-continued-exception2.test: $(OBJDIR)win-continued-exception2$(EXE_SUFFIX)
	echo "set pinargs $(PIN_USERFLAGS)" > $(OBJDIR)$(@:.test=.pindbin)
	echo "run $(OBJDIR)win-continued-exception2$(EXE_SUFFIX)" >> $(OBJDIR)$(@:.test=.pindbin)
	cat $(@:.test=.pindb) >> $(OBJDIR)$(@:.test=.pindbin)
	$(PINDB_WITH_LIBPATH) --pin=$(BARE_PIN) --timeout=$(TLIMIT) --cpu=$(TARGET) --noprompt \
	    $(PINDB_USERFLAGS) < $(OBJDIR)$(@:.test=.pindbin) > $(OBJDIR)$(@:.test=.pindbout)
	$(PYCOMPARE) -p $(@:.test=.compare) -c $(OBJDIR)$(@:.test=.pindbout)
	$(RM) -f $(OBJDIR)$(@:.test=.pindbin) $(OBJDIR)$(@:.test=.pindbout)

# Test Windows software exception with PinDB.  The exception is raised via RaiseException() and is unhandled.
#
pindb-win-software-exception.test: $(OBJDIR)win-software-exception$(EXE_SUFFIX)
	echo "set pinargs $(PIN_USERFLAGS)" > $(OBJDIR)$(@:.test=.pindbin)
	echo "run $(OBJDIR)win-software-exception$(EXE_SUFFIX)" >> $(OBJDIR)$(@:.test=.pindbin)
	cat $(@:.test=.pindb) >> $(OBJDIR)$(@:.test=.pindbin)
	$(PINDB_WITH_LIBPATH) --pin=$(BARE_PIN) --timeout=$(TLIMIT) --cpu=$(TARGET) --noprompt \
	    $(PINDB_USERFLAGS) < $(OBJDIR)$(@:.test=.pindbin) > $(OBJDIR)$(@:.test=.pindbout)
	$(PYCOMPARE) -p $(@:.test=.compare) -c $(OBJDIR)$(@:.test=.pindbout)
	$(RM) -f $(OBJDIR)$(@:.test=.pindbin) $(OBJDIR)$(@:.test=.pindbout)

# Test Windows C++ exception with PinDB.
#
pindb-win-cpp-exception.test: $(OBJDIR)win-cpp-exception$(EXE_SUFFIX)
	echo "set pinargs $(PIN_USERFLAGS)" > $(OBJDIR)$(@:.test=.pindbin)
	echo "run $(OBJDIR)win-cpp-exception$(EXE_SUFFIX)" >> $(OBJDIR)$(@:.test=.pindbin)
	cat $(@:.test=.pindb) >> $(OBJDIR)$(@:.test=.pindbin)
	$(PINDB_WITH_LIBPATH) --pin=$(BARE_PIN) --timeout=$(TLIMIT) --cpu=$(TARGET) --noprompt \
	    $(PINDB_USERFLAGS) < $(OBJDIR)$(@:.test=.pindbin) > $(OBJDIR)$(@:.test=.pindbout)
	$(PYCOMPARE) -p $(@:.test=.compare) -c $(OBJDIR)$(@:.test=.pindbout)
	$(RM) -f $(OBJDIR)$(@:.test=.pindbin) $(OBJDIR)$(@:.test=.pindbout)

# Test ability to squash a Windows exception.  Squashing a first-chance exception re-executes
# the excepting instruction, which raises a new first-chance exception.  Squashing a last-chance
# exception also re-executes the excepting instruction, which raises a new first-chance exception.
#
pindb-win-squash-exception.test: $(OBJDIR)win-unhandled-exception$(EXE_SUFFIX)
	echo "set pinargs $(PIN_USERFLAGS)" > $(OBJDIR)$(@:.test=.pindbin)
	echo "run $(OBJDIR)win-unhandled-exception$(EXE_SUFFIX)" >> $(OBJDIR)$(@:.test=.pindbin)
	cat $(@:.test=.pindb) >> $(OBJDIR)$(@:.test=.pindbin)
	$(PINDB_WITH_LIBPATH) --pin=$(BARE_PIN) --timeout=$(TLIMIT) --cpu=$(TARGET) --noprompt \
	    $(PINDB_USERFLAGS) < $(OBJDIR)$(@:.test=.pindbin) > $(OBJDIR)$(@:.test=.pindbout)
	$(PYCOMPARE) -p $(@:.test=.compare) -c $(OBJDIR)$(@:.test=.pindbout)
	$(RM) -f $(OBJDIR)$(@:.test=.pindbin) $(OBJDIR)$(@:.test=.pindbout)

# Test ability to single-step after receiving a Windows exception.  Stepping from a first-chance
# exception should go to the first instruction in the handler.  Stepping from a last-chance
# exception should cause the application to terminate.
#
pindb-win-step-exception.test: $(OBJDIR)win-unhandled-exception$(EXE_SUFFIX)
	echo "set pinargs $(PIN_USERFLAGS)" > $(OBJDIR)$(@:.test=.pindbin)
	echo "run $(OBJDIR)win-unhandled-exception$(EXE_SUFFIX)" >> $(OBJDIR)$(@:.test=.pindbin)
	cat $(@:.test=.pindb) >> $(OBJDIR)$(@:.test=.pindbin)
	$(PINDB_WITH_LIBPATH) --pin=$(BARE_PIN) --timeout=$(TLIMIT) --cpu=$(TARGET) --noprompt \
	    $(PINDB_USERFLAGS) < $(OBJDIR)$(@:.test=.pindbin) > $(OBJDIR)$(@:.test=.pindbout)
	$(PYCOMPARE) -p $(@:.test=.compare) -c $(OBJDIR)$(@:.test=.pindbout)
	$(RM) -f $(OBJDIR)$(@:.test=.pindbin) $(OBJDIR)$(@:.test=.pindbout)

# Test that Pin properly handles exception which happens after beginning of process exit flow
# when PinADX is disabled.
#
pindb-win-exception-after-exit.test: $(OBJDIR)win-exception-after-exit$(EXE_SUFFIX)
	echo "set pinargs $(PIN_USERFLAGS)" > $(OBJDIR)$(@:.test=.pindbin)
	echo "run $(OBJDIR)win-exception-after-exit$(EXE_SUFFIX)" >> $(OBJDIR)$(@:.test=.pindbin)
	cat $(@:.test=.pindb) >> $(OBJDIR)$(@:.test=.pindbin)
	$(PINDB_WITH_LIBPATH) --pin=$(BARE_PIN) --timeout=$(TLIMIT) --cpu=$(TARGET) \
	    --noprompt $(PINDB_USERFLAGS) < $(OBJDIR)$(@:.test=.pindbin) > $(OBJDIR)$(@:.test=.pindbout)
	sleep 2
	$(QGREP) "Caught exception C0000005" $(OBJDIR)$(@:.test=.pindbout)
	$(RM) -f $(OBJDIR)$(@:.test=.pindbin) $(OBJDIR)$(@:.test=.pindbout)

# Test DLL load / unload notifications with PinDB.
#
pindb-win-library-notifications.test: $(OBJDIR)win-load-library$(EXE_SUFFIX) $(OBJDIR)$(DLL_PREFIX)win-foo-library$(DLL_SUFFIX)
	echo "set pinargs $(PIN_USERFLAGS)" > $(OBJDIR)$(@:.test=.pindbin)
	echo "run $(OBJDIR)win-load-library$(EXE_SUFFIX) $(OBJDIR)$(DLL_PREFIX)win-foo-library$(DLL_SUFFIX)" >> $(OBJDIR)$(@:.test=.pindbin)
	cat $(@:.test=.pindb) >> $(OBJDIR)$(@:.test=.pindbin)
	$(PINDB_WITH_LIBPATH) --pin=$(BARE_PIN) --timeout=$(TLIMIT) --cpu=$(TARGET) --noprompt \
	    $(PINDB_USERFLAGS) < $(OBJDIR)$(@:.test=.pindbin) > $(OBJDIR)$(@:.test=.pindbout)
	$(PYCOMPARE) -p $(@:.test=.compare) -c $(OBJDIR)$(@:.test=.pindbout)
	$(RM) -f $(OBJDIR)$(@:.test=.pindbin) $(OBJDIR)$(@:.test=.pindbout)

# Test ability to single-step after receiving a Windows library load / unload notification.
#
pindb-win-step-library.test: $(OBJDIR)win-load-library$(EXE_SUFFIX) $(OBJDIR)$(DLL_PREFIX)win-foo-library$(DLL_SUFFIX)
	echo "set pinargs $(PIN_USERFLAGS)" > $(OBJDIR)$(@:.test=.pindbin)
	echo "run $(OBJDIR)win-load-library$(EXE_SUFFIX) $(OBJDIR)$(DLL_PREFIX)win-foo-library$(DLL_SUFFIX)" >> $(OBJDIR)$(@:.test=.pindbin)
	cat $(@:.test=.pindb) >> $(OBJDIR)$(@:.test=.pindbin)
	$(PINDB_WITH_LIBPATH) --pin=$(BARE_PIN) --timeout=$(TLIMIT) --cpu=$(TARGET) --noprompt \
	    $(PINDB_USERFLAGS) < $(OBJDIR)$(@:.test=.pindbin) > $(OBJDIR)$(@:.test=.pindbout)
	$(PYCOMPARE) -p $(@:.test=.compare) -c $(OBJDIR)$(@:.test=.pindbout)
	$(RM) -f $(OBJDIR)$(@:.test=.pindbin) $(OBJDIR)$(@:.test=.pindbout)

# Make sure PinDB does not wait for confirmation when killing the target process when --noprompt is specified.
#
pindb-noprompt-kill.test: $(OBJDIR)simple$(EXE_SUFFIX)
	echo "set pinargs $(PIN_USERFLAGS)" > $(OBJDIR)$(@:.test=.pindbin)
	echo "run $(OBJDIR)simple$(EXE_SUFFIX)" >> $(OBJDIR)$(@:.test=.pindbin)
	cat $(@:.test=.pindb) >> $(OBJDIR)$(@:.test=.pindbin)
	$(PINDB_WITH_LIBPATH) --pin=$(BARE_PIN) --timeout=$(TLIMIT) --cpu=$(TARGET) --noprompt \
	    $(PINDB_USERFLAGS) < $(OBJDIR)$(@:.test=.pindbin) > $(OBJDIR)$(@:.test=.pindbout)
	$(RM) -f $(OBJDIR)$(@:.test=.pindbin) $(OBJDIR)$(@:.test=.pindbout)

# Test the -appdebug_allow_remote knob, which allows GDB to run on a different machine than Pin.
# However, it's difficult to actually run GDB on a different machine as part of this test, so
# we still run them both on the same machine.
#
allow-remote.test: $(OBJDIR)simple$(EXE_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.out)
	$(PIN) $(PINFLAGS_DEBUG) -appdebug_allow_remote -- $(OBJDIR)simple$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.out) &
	count=0; \
	until $(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) > /dev/null || $(BASHTEST) $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done
	echo '$(BATCH_CMD_TIMEOUT_LIMIT)' > $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	cat simple.$(DBG_STR) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)simple$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(PYCOMPARE) -p simple.compare -c $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(OBJDIR)$(@:.test=.$(DBG_STR)out)

# Verify that Pin doesn't crash if the debugger attempts to access a 64-bit address for a 32-bit Pin process.
#
access-64-on-32.test: $(OBJDIR)simple$(EXE_SUFFIX)
	echo "set pinargs $(PIN_USERFLAGS)" > $(OBJDIR)$(@:.test=.pindbin)
	echo "run $(OBJDIR)simple$(EXE_SUFFIX)" >> $(OBJDIR)$(@:.test=.pindbin)
	cat $(@:.test=.pindb) >> $(OBJDIR)$(@:.test=.pindbin)
	$(PINDB_WITH_LIBPATH) --pin=$(BARE_PIN) --timeout=$(TLIMIT) --cpu=$(TARGET) --noprompt \
	    $(PINDB_USERFLAGS) < $(OBJDIR)$(@:.test=.pindbin) > $(OBJDIR)$(@:.test=.pindbout)
	$(PYCOMPARE) -p $(@:.test=.compare) -c $(OBJDIR)$(@:.test=.pindbout)
	$(RM) -f $(OBJDIR)$(@:.test=.pindbin) $(OBJDIR)$(@:.test=.pindbout)

# Make sure we can ebable debugging via PIN_SetDebugMode() from the tool.  This test should
# be run without -appdebug.
#
set-mode.test: $(OBJDIR)simple$(EXE_SUFFIX) $(OBJDIR)set-mode-tool$(PINTOOL_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.out)
	$(PIN) -t $(OBJDIR)set-mode-tool$(PINTOOL_SUFFIX) -- $(OBJDIR)simple$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.out) &
	count=0; \
	until $(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) > /dev/null || $(BASHTEST) $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done
	echo '$(BATCH_CMD_TIMEOUT_LIMIT)' > $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	cat simple.$(DBG_STR) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)simple$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(PYCOMPARE) -p simple.compare -c $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(OBJDIR)$(@:.test=.$(DBG_STR)out)

# Test that PinDB can detach from Pin.
#
pindb-detach.test: $(OBJDIR)simple-pindb$(EXE_SUFFIX) $(DEFAULT_TOOL)
	$(OBJDIR)simple-pindb$(EXE_SUFFIX) detach $(OBJDIR)$(@:.test=.pindbin.0) $(OBJDIR)$(@:.test=.compare)
	echo "set pinargs $(PIN_USERFLAGS) $(PIN_CMD_DEFAULT_TOOL)" > $(OBJDIR)$(@:.test=.pindbin)
	echo "run $(OBJDIR)simple-pindb$(EXE_SUFFIX)" >> $(OBJDIR)$(@:.test=.pindbin)
	cat $(OBJDIR)$(@:.test=.pindbin.0) >> $(OBJDIR)$(@:.test=.pindbin)
	$(PINDB_WITH_LIBPATH) --pin=$(BARE_PIN) --timeout=$(TLIMIT) --cpu=$(TARGET) --noprompt \
	    $(PINDB_USERFLAGS) < $(OBJDIR)$(@:.test=.pindbin) > $(OBJDIR)$(@:.test=.pindbout)
	$(PYCOMPARE) -p $(OBJDIR)$(@:.test=.compare) -c $(OBJDIR)$(@:.test=.pindbout)
	$(RM) -f $(OBJDIR)$(@:.test=.pindbin) $(OBJDIR)$(@:.test=.pindbout) $(OBJDIR)$(@:.test=.pindbin.0) \
	      $(OBJDIR)$(@:.test=.compare)

# Abruptly disconnect PinDB from Pin.  This simulates the behavior when the debugger unexpectedly dies.
# We expect an error from Pin, but Pin shouldn't hang.
#
pindb-abrupt-disconnect.test: $(OBJDIR)simple$(EXE_SUFFIX)
	echo "set pinargs -logfile $(OBJDIR)$(@:.test=.pin.log) $(PIN_USERFLAGS)" > $(OBJDIR)$(@:.test=.pindbin)
	echo "run $(OBJDIR)simple$(EXE_SUFFIX)" >> $(OBJDIR)$(@:.test=.pindbin)
	cat $(@:.test=.pindb) >> $(OBJDIR)$(@:.test=.pindbin)
	$(PINDB_WITH_LIBPATH) --pin=$(BARE_PIN) --timeout=$(TLIMIT) --cpu=$(TARGET) --noprompt \
	    $(PINDB_USERFLAGS) < $(OBJDIR)$(@:.test=.pindbin) > $(OBJDIR)$(@:.test=.pindbout)
	$(SYNC)
	$(RM) -f $(OBJDIR)$(@:.test=.pin.log) $(OBJDIR)$(@:.test=.pindbin) $(OBJDIR)$(@:.test=.pindbin) \
	      $(OBJDIR)$(@:.test=.pindbout)

# Test the "kill-like-gdb" command in PinDB.  This sends the same legacy "kill" command to PinADX that
# GDB uses.
#
pindb-kill-like-gdb.test: $(OBJDIR)simple$(EXE_SUFFIX)
	echo "set pinargs $(PIN_USERFLAGS)" > $(OBJDIR)$(@:.test=.pindbin)
	echo "run $(OBJDIR)simple$(EXE_SUFFIX)" >> $(OBJDIR)$(@:.test=.pindbin)
	cat $(@:.test=.pindb) >> $(OBJDIR)$(@:.test=.pindbin)
	$(PINDB_WITH_LIBPATH) --pin=$(BARE_PIN) --timeout=$(TLIMIT) --cpu=$(TARGET) --noprompt \
	    $(PINDB_USERFLAGS) < $(OBJDIR)$(@:.test=.pindbin) > $(OBJDIR)$(@:.test=.pindbout)
	$(RM) -f $(OBJDIR)$(@:.test=.pindbin) $(OBJDIR)$(@:.test=.pindbout)

# Test that GDB can detach from Pin and then re-attach later.
#
gdb-detach-reattach.test: $(OBJDIR)reattach-loop$(EXE_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.out)
	$(PIN) $(PINFLAGS_DEBUG) -- $(OBJDIR)reattach-loop$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.out) &
	count=0; \
	until $(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) > /dev/null || $(BASHTEST) $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done
	$(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) > $(OBJDIR)$(@:.test=.port)
	echo '$(BATCH_CMD_TIMEOUT_LIMIT)' > $(OBJDIR)$(@:.test=-1.$(DBG_STR)in)
	cat $(OBJDIR)$(@:.test=.port) >> $(OBJDIR)$(@:.test=-1.$(DBG_STR)in)
	cat $(@:.test=-1.$(DBG_STR)) >> $(OBJDIR)$(@:.test=-1.$(DBG_STR)in)
	$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=-1.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)reattach-loop$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=-1.$(DBG_STR)out)
	echo '$(BATCH_CMD_TIMEOUT_LIMIT)' > $(OBJDIR)$(@:.test=-2.$(DBG_STR)in)
	cat $(OBJDIR)$(@:.test=.port) >> $(OBJDIR)$(@:.test=-2.$(DBG_STR)in)
	cat $(@:.test=-2.$(DBG_STR)) >> $(OBJDIR)$(@:.test=-2.$(DBG_STR)in)
	$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=-2.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)reattach-loop$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=-2.$(DBG_STR)out)
	$(PYCOMPARE) -p $(@:.test=-gdb-1.compare$(COMPARE_RE_FILE_SUFFIX)) -c $(OBJDIR)$(@:.test=-1.$(DBG_STR)out)
	$(PYCOMPARE) -p $(@:.test=-gdb-2.compare$(COMPARE_RE_FILE_SUFFIX)) -c $(OBJDIR)$(@:.test=-2.$(DBG_STR)out)
	$(PYCOMPARE) -p $(@:.test=-app.compare$(COMPARE_RE_FILE_SUFFIX)) -c $(OBJDIR)$(@:.test=.out)
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.port) $(OBJDIR)$(@:.test=-1.$(DBG_STR)in) \
	      $(OBJDIR)$(@:.test=-1.$(DBG_STR)out) $(OBJDIR)$(@:.test=-2.$(DBG_STR)in) $(OBJDIR)$(@:.test=-2.$(DBG_STR)out)

# Test that GDB can detach from Pin and then re-attach later.
#
gdb-detach-reattach-fixed-port.test: $(OBJDIR)reattach-loop$(EXE_SUFFIX) $(OBJDIR)pick-random-port$(EXE_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.out)
	$(OBJDIR)pick-random-port$(EXE_SUFFIX) unused > $(OBJDIR)$(@:.test=.random)
	$(PIN) $(PINFLAGS_DEBUG) -appdebug_server_port `cat $(OBJDIR)$(@:.test=.random)` -- \
	    $(OBJDIR)reattach-loop$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.out) &
	count=0; \
	until $(GREP) 'target remote :'`cat $(OBJDIR)$(@:.test=.random)` \
	    $(OBJDIR)$(@:.test=.out) > /dev/null || $(BASHTEST) $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done
	$(GREP) 'target remote :'`cat $(OBJDIR)$(@:.test=.random)` $(OBJDIR)$(@:.test=.out) > $(OBJDIR)$(@:.test=.port)
	echo '$(BATCH_CMD_TIMEOUT_LIMIT)' > $(OBJDIR)$(@:.test=-1.$(DBG_STR)in)
	cat $(OBJDIR)$(@:.test=.port) >> $(OBJDIR)$(@:.test=-1.$(DBG_STR)in)
	cat $(@:.test=-1.$(DBG_STR)) >> $(OBJDIR)$(@:.test=-1.$(DBG_STR)in)
	$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=-1.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)reattach-loop$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=-1.$(DBG_STR)out)
	echo '$(BATCH_CMD_TIMEOUT_LIMIT)' > $(OBJDIR)$(@:.test=-2.$(DBG_STR)in)
	cat $(OBJDIR)$(@:.test=.port) >> $(OBJDIR)$(@:.test=-2.$(DBG_STR)in)
	cat $(@:.test=-2.$(DBG_STR)) >> $(OBJDIR)$(@:.test=-2.$(DBG_STR)in)
	$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=-2.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)reattach-loop$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=-2.$(DBG_STR)out)
	$(PYCOMPARE) -p $(@:.test=-gdb-1.compare$(COMPARE_RE_FILE_SUFFIX)) -c $(OBJDIR)$(@:.test=-1.$(DBG_STR)out)
	$(PYCOMPARE) -p $(@:.test=-gdb-2.compare$(COMPARE_RE_FILE_SUFFIX)) -c $(OBJDIR)$(@:.test=-2.$(DBG_STR)out)
	$(PYCOMPARE) -p $(@:.test=-app.compare$(COMPARE_RE_FILE_SUFFIX)) -c $(OBJDIR)$(@:.test=.out)
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.port) $(OBJDIR)$(@:.test=-1.$(DBG_STR)in) \
	    $(OBJDIR)$(@:.test=-1.$(DBG_STR)out) $(OBJDIR)$(@:.test=-2.$(DBG_STR)in) $(OBJDIR)$(@:.test=-2.$(DBG_STR)out) \
	    $(OBJDIR)$(@:.test=.random)

# Test that extended commands work using PinDB.  This also checks that the tool does _not_ receive
# commands that start with the "pin " prefix.
#
pindb-simple-command.test: $(OBJDIR)simple$(EXE_SUFFIX) $(OBJDIR)simple-command-tool$(PINTOOL_SUFFIX)
	echo "set pinargs $(PIN_USERFLAGS) -t $(OBJDIR)simple-command-tool$(PINTOOL_SUFFIX)" > $(OBJDIR)$(@:.test=.pindbin)
	echo "run $(OBJDIR)simple$(EXE_SUFFIX)" >> $(OBJDIR)$(@:.test=.pindbin)
	cat $(@:.test=.pindb) >> $(OBJDIR)$(@:.test=.pindbin)
	$(PINDB_WITH_LIBPATH) --pin=$(BARE_PIN) --timeout=$(TLIMIT) --cpu=$(TARGET) --noprompt \
	    $(PINDB_USERFLAGS) < $(OBJDIR)$(@:.test=.pindbin) > $(OBJDIR)$(@:.test=.pindbout)
	$(PYCOMPARE) -p $(@:.test=.compare) -c $(OBJDIR)$(@:.test=.pindbout)
	$(RM) -f $(OBJDIR)$(@:.test=.pindbin) $(OBJDIR)$(@:.test=.pindbout)

# Test that the debugger can write to an invalid address in the application.
#
invalid-write.test: $(OBJDIR)simple$(EXE_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.out)
	$(PIN) $(PINFLAGS_DEBUG) -- $(OBJDIR)simple$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.out) &
	count=0; \
	until $(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) > /dev/null || $(BASHTEST) $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done
	echo '$(BATCH_CMD_TIMEOUT_LIMIT)' > $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	cat $(@:.test=.$(DBG_STR)) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	-$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)simple$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.$(DBG_STR)out) 2>&1
	$(PYCOMPARE) -p $(@:.test=.compare$(COMPARE_RE_FILE_SUFFIX)) -c $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(OBJDIR)$(@:.test=.$(DBG_STR)out)

# Try debugging an application with lots of threads that exit at the same time.
#
pindb-win-thread-stress.test: $(OBJDIR)win-thread-stress$(EXE_SUFFIX)
	echo "set pinargs $(PIN_USERFLAGS)" > $(OBJDIR)$(@:.test=.pindbin)
	echo "run $(OBJDIR)win-thread-stress$(EXE_SUFFIX)" >> $(OBJDIR)$(@:.test=.pindbin)
	cat $(@:.test=.pindb) >> $(OBJDIR)$(@:.test=.pindbin)
	$(PINDB_WITH_LIBPATH) --pin=$(BARE_PIN) --timeout=$(TLIMIT) --cpu=$(TARGET) --noprompt \
	    $(PINDB_USERFLAGS) < $(OBJDIR)$(@:.test=.pindbin) > $(OBJDIR)$(@:.test=.pindbout)
	$(PYCOMPARE) -p $(@:.test=.compare) -c $(OBJDIR)$(@:.test=.pindbout)
	$(RM) -f $(OBJDIR)$(@:.test=.pindbin) $(OBJDIR)$(@:.test=.pindbout)

# Test that we can single-step over an instruction that exits the calling thread while another thread
# still exists.  We expect the debugger to stop after the thread exits, leaving the focus on
# the one remaining thread.
#
pindb-pthread-step-exit.test: $(OBJDIR)pthread-bare-exit$(EXE_SUFFIX) $(DEFAULT_TOOL)
	echo "set pinargs $(PIN_USERFLAGS) $(PIN_CMD_DEFAULT_TOOL)" > $(OBJDIR)$(@:.test=.pindbin)
	echo "run $(OBJDIR)pthread-bare-exit$(EXE_SUFFIX)" >> $(OBJDIR)$(@:.test=.pindbin)
	cat $(@:.test=.pindb) >> $(OBJDIR)$(@:.test=.pindbin)
	$(PINDB_WITH_LIBPATH) --pin=$(BARE_PIN) --timeout=$(TLIMIT) --cpu=$(TARGET) --noprompt \
	    $(PINDB_USERFLAGS) < $(OBJDIR)$(@:.test=.pindbin) > $(OBJDIR)$(@:.test=.pindbout)
	$(PYCOMPARE) -p $(@:.test=.compare) -c $(OBJDIR)$(@:.test=.pindbout)
	$(RM) -f $(OBJDIR)$(@:.test=.pindbin) $(OBJDIR)$(@:.test=.pindbout)

# Same test as above, but use GDB instead of PinDB.
#
gdb-pthread-step-exit.test: $(OBJDIR)pthread-bare-exit$(EXE_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.out)
	$(PIN) $(PINFLAGS_DEBUG) -- $(OBJDIR)pthread-bare-exit$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.out) &
	count=0; \
	until $(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) > /dev/null || $(BASHTEST) $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done
	echo '$(BATCH_CMD_TIMEOUT_LIMIT)' > $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	cat $(@:.test=.$(DBG_STR)) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)pthread-bare-exit$(EXE_SUFFIX) \
	  > $(OBJDIR)$(@:.test=.$(DBG_STR)out) 2>&1
	$(PYCOMPARE) -p $(@:.test=.compare$(COMPARE_RE_FILE_SUFFIX)) -c $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(OBJDIR)$(@:.test=.$(DBG_STR)out)

# Test that we can debug an application where one thread exits the entire process
# while another thread still exists.
#
pindb-pthread-cont-exitgroup.test: $(OBJDIR)pthread-bare-exitgroup$(EXE_SUFFIX) $(DEFAULT_TOOL)
	echo "set pinargs $(PIN_USERFLAGS) $(PIN_CMD_DEFAULT_TOOL)" > $(OBJDIR)$(@:.test=.pindbin)
	echo "run $(OBJDIR)pthread-bare-exitgroup$(EXE_SUFFIX)" >> $(OBJDIR)$(@:.test=.pindbin)
	cat $(@:.test=.pindb) >> $(OBJDIR)$(@:.test=.pindbin)
	$(PINDB_WITH_LIBPATH) --pin=$(BARE_PIN) --timeout=$(TLIMIT) --cpu=$(TARGET) --noprompt \
	    $(PINDB_USERFLAGS) < $(OBJDIR)$(@:.test=.pindbin) > $(OBJDIR)$(@:.test=.pindbout)
	$(PYCOMPARE) -p $(@:.test=.compare) -c $(OBJDIR)$(@:.test=.pindbout)
	$(RM) -f $(OBJDIR)$(@:.test=.pindbin) $(OBJDIR)$(@:.test=.pindbout)

# Test that we can single-step over an instruction that exits the entire process while
# another thread still exists.  We expect the debugger to stop after the exit call
# and indicate that the process is terminated.
#
pindb-pthread-step-exitgroup.test: $(OBJDIR)pthread-bare-exitgroup$(EXE_SUFFIX) $(DEFAULT_TOOL)
	echo "set pinargs $(PIN_USERFLAGS) $(PIN_CMD_DEFAULT_TOOL)" > $(OBJDIR)$(@:.test=.pindbin)
	echo "run $(OBJDIR)pthread-bare-exitgroup$(EXE_SUFFIX)" >> $(OBJDIR)$(@:.test=.pindbin)
	cat $(@:.test=.pindb) >> $(OBJDIR)$(@:.test=.pindbin)
	$(PINDB_WITH_LIBPATH) --pin=$(BARE_PIN) --timeout=$(TLIMIT) --cpu=$(TARGET) --noprompt \
	    $(PINDB_USERFLAGS) < $(OBJDIR)$(@:.test=.pindbin) > $(OBJDIR)$(@:.test=.pindbout)
	$(PYCOMPARE) -p $(@:.test=.compare) -c $(OBJDIR)$(@:.test=.pindbout)
	$(RM) -f $(OBJDIR)$(@:.test=.pindbin) $(OBJDIR)$(@:.test=.pindbout)

# Test that we can single-step over an instruction that triggers a custom breakpoint.
# This should stop due to the custom breakpoint, without stepping over the instruction.
# A subsequent step should skip the custom breakpoint and step over the instruction.
#
pindb-step-custom-break.test: $(OBJDIR)simple-pindb$(EXE_SUFFIX) $(OBJDIR)use-debugger-shell$(PINTOOL_SUFFIX)
	$(OBJDIR)simple-pindb$(EXE_SUFFIX) step-custom-break $(OBJDIR)$(@:.test=.pindbin.0) $(OBJDIR)$(@:.test=.compare)
	echo "set pinargs $(PIN_USERFLAGS) -t $(OBJDIR)use-debugger-shell$(PINTOOL_SUFFIX)" > $(OBJDIR)$(@:.test=.pindbin)
	echo "run $(OBJDIR)simple-pindb$(EXE_SUFFIX)" >> $(OBJDIR)$(@:.test=.pindbin)
	cat $(OBJDIR)$(@:.test=.pindbin.0) >> $(OBJDIR)$(@:.test=.pindbin)
	$(PINDB_WITH_LIBPATH) --pin=$(BARE_PIN) --timeout=$(TLIMIT) --cpu=$(TARGET) --noprompt \
	    $(PINDB_USERFLAGS) < $(OBJDIR)$(@:.test=.pindbin) > $(OBJDIR)$(@:.test=.pindbout)
	$(PYCOMPARE) -p $(OBJDIR)$(@:.test=.compare) -c $(OBJDIR)$(@:.test=.pindbout)
	$(RM) -f $(OBJDIR)$(@:.test=.pindbin.0) $(OBJDIR)$(@:.test=.compare) $(OBJDIR)$(@:.test=.pindbin) \
	      $(OBJDIR)$(@:.test=.pindbout)

# Test the behavior when several threads stop at simultaneous tool breakpoints.
# After one breakpoint is delivered, the others are pending.  This test makes
# sure that the pending events are delivered one-at-a-time to GDB.  It also
# tests that the tool can list the pending breakpoints.
#
simultaneous-toolbreak.test: $(OBJDIR)thread-$(OS_TYPE)$(EXE_SUFFIX) $(OBJDIR)simultaneous-toolbreak$(PINTOOL_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.out)
	$(PIN) $(PINFLAGS_DEBUG) -t $(OBJDIR)simultaneous-toolbreak$(PINTOOL_SUFFIX) -sync_for_threads 4 \
	  -- $(OBJDIR)thread-$(OS_TYPE)$(EXE_SUFFIX) -threads 4 > $(OBJDIR)$(@:.test=.out) &
	count=0; \
	until $(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) > /dev/null || $(BASHTEST) $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done
	echo '$(BATCH_CMD_TIMEOUT_LIMIT)' > $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	cat $(@:.test=.$(DBG_STR)) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)thread-$(OS_TYPE)$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.$(DBG_STR)out) 2>&1
	$(PYCOMPARE) -p $(@:.test=.compare$(COMPARE_RE_FILE_SUFFIX)) -c $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(OBJDIR)$(@:.test=.$(DBG_STR)out)

simultaneous-toolbreak_const_context.test: $(OBJDIR)thread-$(OS_TYPE)$(EXE_SUFFIX) $(OBJDIR)simultaneous-toolbreak$(PINTOOL_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.out)
	$(PIN) $(PINFLAGS_DEBUG) -t $(OBJDIR)simultaneous-toolbreak$(PINTOOL_SUFFIX) -sync_for_threads 4 -const_context 1 \
	  -- $(OBJDIR)thread-$(OS_TYPE)$(EXE_SUFFIX) -threads 4 > $(OBJDIR)$(@:.test=.out) &
	count=0; \
	until $(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) > /dev/null || test $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done
	echo '$(BATCH_CMD_TIMEOUT_LIMIT)' > $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	cat $(@:.test=.$(DBG_STR)) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)thread-$(OS_TYPE)$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.$(DBG_STR)out) 2>&1
	$(PYCOMPARE) -p $(@:.test=.compare$(COMPARE_RE_FILE_SUFFIX)) -c $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(OBJDIR)$(@:.test=.$(DBG_STR)out)

# Another test when several threads stop at simultaneous tool breakpoints.
# After one breakpoint is delivered, the others are pending.  This test
# squashes the pending breakpoints and then makes sure they are not
# delivered to GDB.
#
simultaneous-toolbreak-squash.test: $(OBJDIR)thread-$(OS_TYPE)$(EXE_SUFFIX) $(OBJDIR)simultaneous-toolbreak$(PINTOOL_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.out)
	$(PIN) $(PINFLAGS_DEBUG) -t $(OBJDIR)simultaneous-toolbreak$(PINTOOL_SUFFIX) -sync_for_threads 4 \
	  -- $(OBJDIR)thread-$(OS_TYPE)$(EXE_SUFFIX) -threads 4 > $(OBJDIR)$(@:.test=.out) &
	count=0; \
	until $(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) > /dev/null || $(BASHTEST) $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done
	echo '$(BATCH_CMD_TIMEOUT_LIMIT)' > $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	cat $(@:.test=.$(DBG_STR)) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)thread-$(OS_TYPE)$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.$(DBG_STR)out) 2>&1
	$(PYCOMPARE) -p $(@:.test=.compare$(COMPARE_RE_FILE_SUFFIX)) -c $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(OBJDIR)$(@:.test=.$(DBG_STR)out)

# Another test when several threads stop at simultaneous tool breakpoints.
# After one breakpoint is delivered, the others are pending.  This test
# changes the message of the pending breakpoints and then makes sure they
# are delivered with the new message.
#
simultaneous-toolbreak-change.test: $(OBJDIR)thread-$(OS_TYPE)$(EXE_SUFFIX) $(OBJDIR)simultaneous-toolbreak$(PINTOOL_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.out)
	$(PIN) $(PINFLAGS_DEBUG) -t $(OBJDIR)simultaneous-toolbreak$(PINTOOL_SUFFIX) -sync_for_threads 4 \
	  -- $(OBJDIR)thread-$(OS_TYPE)$(EXE_SUFFIX) -threads 4 > $(OBJDIR)$(@:.test=.out) &
	count=0; \
	until $(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) > /dev/null || $(BASHTEST) $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done
	echo '$(BATCH_CMD_TIMEOUT_LIMIT)' > $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	cat $(@:.test=.$(DBG_STR)) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)thread-$(OS_TYPE)$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.$(DBG_STR)out) 2>&1
	$(PYCOMPARE) -p $(@:.test=.compare$(COMPARE_RE_FILE_SUFFIX)) -c $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(OBJDIR)$(@:.test=.$(DBG_STR)out)

# Test that we can attach GDB to the application after it has stopped
# at several simultaneous tool breakpoints.  We expect GDB to attach
# at the context of one of those breakpoints, and we expect the others
# to be pending.
#
simultaneous-toolbreak-attach.test: $(OBJDIR)thread-$(OS_TYPE)$(EXE_SUFFIX) $(OBJDIR)simultaneous-toolbreak$(PINTOOL_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.out)
	$(PIN) $(PINFLAGS_DEBUG_RUNFREE) \
	  -t $(OBJDIR)simultaneous-toolbreak$(PINTOOL_SUFFIX) -sync_for_threads 4 -wait_for_debugger \
	    -- $(OBJDIR)thread-$(OS_TYPE)$(EXE_SUFFIX) -threads 4 > $(OBJDIR)$(@:.test=.out) &
	count=0; \
	until $(GREP) 'Waiting for debugger to attach' $(OBJDIR)$(@:.test=.out) > /dev/null || $(BASHTEST) $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done
	echo '$(BATCH_CMD_TIMEOUT_LIMIT)' > $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	cat $(@:.test=.$(DBG_STR)) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)thread-$(OS_TYPE)$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.$(DBG_STR)out) 2>&1
	$(PYCOMPARE) -p $(@:.test=.compare$(COMPARE_RE_FILE_SUFFIX)) -c $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(OBJDIR)$(@:.test=.$(DBG_STR)out)

# Another test when several threads stop at simultaneous tool breakpoints.
# This test runs with PinDB, which expects all breakpoints to be delivered
# simultaneously.  Make sure that all 4 breakpoints are delivered at once,
# and that none are pending.
#
pindb-simultaneous-toolbreak.test: $(OBJDIR)thread-$(OS_TYPE)$(EXE_SUFFIX) $(OBJDIR)simultaneous-toolbreak$(PINTOOL_SUFFIX)
	echo "set pinargs $(PIN_USERFLAGS) -t $(OBJDIR)simultaneous-toolbreak$(PINTOOL_SUFFIX) -sync_for_threads 4" \
	  > $(OBJDIR)$(@:.test=.pindbin)
	echo "run $(OBJDIR)thread-$(OS_TYPE)$(EXE_SUFFIX) -threads 4" >> $(OBJDIR)$(@:.test=.pindbin)
	cat $(@:.test=.pindb) >> $(OBJDIR)$(@:.test=.pindbin)
	$(PINDB_WITH_LIBPATH) --pin=$(BARE_PIN) --timeout=$(TLIMIT) --cpu=$(TARGET) --noprompt \
	    $(PINDB_USERFLAGS) < $(OBJDIR)$(@:.test=.pindbin) > $(OBJDIR)$(@:.test=.pindbout)
	$(PYCOMPARE) -p $(@:.test=.compare) -c $(OBJDIR)$(@:.test=.pindbout)
	$(RM) -f $(OBJDIR)$(@:.test=.pindbin) $(OBJDIR)$(@:.test=.pindbout)

# Another test when several threads stop at simultaneous tool breakpoints.
# This test runs PinDB in a mode where each breakpoint is delivered one-
# at-a-time (similar to GDB).  We make sure that there are pending breakpoints
# after the first is delivered, and we make sure that all breakpoints are
# delivered one-at-a-time.
#
pindb-simultaneous-toolbreak-serialize.test: $(OBJDIR)thread-$(OS_TYPE)$(EXE_SUFFIX) $(OBJDIR)simultaneous-toolbreak$(PINTOOL_SUFFIX)
	echo "set pinargs $(PIN_USERFLAGS) -t $(OBJDIR)simultaneous-toolbreak$(PINTOOL_SUFFIX) -sync_for_threads 4" \
	  > $(OBJDIR)$(@:.test=.pindbin)
	echo "run $(OBJDIR)thread-$(OS_TYPE)$(EXE_SUFFIX) -threads 4" >> $(OBJDIR)$(@:.test=.pindbin)
	cat $(@:.test=.pindb) >> $(OBJDIR)$(@:.test=.pindbin)
	$(PINDB_WITH_LIBPATH) --pin=$(BARE_PIN) --timeout=$(TLIMIT) --cpu=$(TARGET) \
	    --serialize-debugger-events --noprompt $(PINDB_USERFLAGS) \
	    < $(OBJDIR)$(@:.test=.pindbin) > $(OBJDIR)$(@:.test=.pindbout)
	$(PYCOMPARE) -p $(@:.test=.compare) -c $(OBJDIR)$(@:.test=.pindbout)
	$(RM) -f $(OBJDIR)$(@:.test=.pindbin) $(OBJDIR)$(@:.test=.pindbout)

# Another test when several threads stop at simultaneous tool breakpoints.
# This test also runs PinDB in a mode where each breakpoint is delivered
# one-at-a-time.  In this test, we squash the remaining breakpoints after
# the first is delivered and then make sure that the squashed breakpoints
# are not delivered.
#
pindb-simultaneous-toolbreak-squash.test: $(OBJDIR)thread-$(OS_TYPE)$(EXE_SUFFIX) $(OBJDIR)simultaneous-toolbreak$(PINTOOL_SUFFIX)
	echo "set pinargs $(PIN_USERFLAGS) -t $(OBJDIR)simultaneous-toolbreak$(PINTOOL_SUFFIX) -sync_for_threads 4" \
	  > $(OBJDIR)$(@:.test=.pindbin)
	echo "run $(OBJDIR)thread-$(OS_TYPE)$(EXE_SUFFIX) -threads 4" >> $(OBJDIR)$(@:.test=.pindbin)
	cat $(@:.test=.pindb) >> $(OBJDIR)$(@:.test=.pindbin)
	$(PINDB_WITH_LIBPATH) --pin=$(BARE_PIN) --timeout=$(TLIMIT) --cpu=$(TARGET) \
	    --serialize-debugger-events --noprompt $(PINDB_USERFLAGS) \
	    < $(OBJDIR)$(@:.test=.pindbin) > $(OBJDIR)$(@:.test=.pindbout)
	$(PYCOMPARE) -p $(@:.test=.compare) -c $(OBJDIR)$(@:.test=.pindbout)
	$(RM) -f $(OBJDIR)$(@:.test=.pindbin) $(OBJDIR)$(@:.test=.pindbout)

# Another test when several threads stop at simultaneous tool breakpoints.
# This test also runs PinDB in a mode where each breakpoint is delivered
# one-at-a-time.  In this test, we change the message of the remaining
# breakpoints after the first is delivered and then make sure that the
# breakpoints are delivered with the changed message.
#
pindb-simultaneous-toolbreak-change.test: $(OBJDIR)thread-$(OS_TYPE)$(EXE_SUFFIX) $(OBJDIR)simultaneous-toolbreak$(PINTOOL_SUFFIX)
	echo "set pinargs $(PIN_USERFLAGS) -t $(OBJDIR)simultaneous-toolbreak$(PINTOOL_SUFFIX) -sync_for_threads 4" \
	  > $(OBJDIR)$(@:.test=.pindbin)
	echo "run $(OBJDIR)thread-$(OS_TYPE)$(EXE_SUFFIX) -threads 4" >> $(OBJDIR)$(@:.test=.pindbin)
	cat $(@:.test=.pindb) >> $(OBJDIR)$(@:.test=.pindbin)
	$(PINDB_WITH_LIBPATH) --pin=$(BARE_PIN) --timeout=$(TLIMIT) --cpu=$(TARGET) \
	    --serialize-debugger-events --noprompt $(PINDB_USERFLAGS) \
	    < $(OBJDIR)$(@:.test=.pindbin) > $(OBJDIR)$(@:.test=.pindbout)
	$(PYCOMPARE) -p $(@:.test=.compare) -c $(OBJDIR)$(@:.test=.pindbout)
	$(RM) -f $(OBJDIR)$(@:.test=.pindbin) $(OBJDIR)$(@:.test=.pindbout)

# Another test when several threads stop at simultaneous tool breakpoints.
# When breakpoints are delivered one-at-a-time, try single-stepping one
# thread while there are pending breakpoints on the others.  The pending
# breakpoints should not be delivered because the single-step doesn't
# advance the execution of those threads.
#
pindb-simultaneous-toolbreak-step.test: $(OBJDIR)thread-$(OS_TYPE)$(EXE_SUFFIX) $(OBJDIR)simultaneous-toolbreak$(PINTOOL_SUFFIX)
	echo "set pinargs $(PIN_USERFLAGS) -t $(OBJDIR)simultaneous-toolbreak$(PINTOOL_SUFFIX) -sync_for_threads 4" \
	  > $(OBJDIR)$(@:.test=.pindbin)
	echo "run $(OBJDIR)thread-$(OS_TYPE)$(EXE_SUFFIX) -threads 4" >> $(OBJDIR)$(@:.test=.pindbin)
	cat $(@:.test=.pindb) >> $(OBJDIR)$(@:.test=.pindbin)
	$(PINDB_WITH_LIBPATH) --pin=$(BARE_PIN) --timeout=$(TLIMIT) --cpu=$(TARGET) \
	    --serialize-debugger-events --noprompt $(PINDB_USERFLAGS) \
	    < $(OBJDIR)$(@:.test=.pindbin) > $(OBJDIR)$(@:.test=.pindbout)
	$(PYCOMPARE) -p $(@:.test=.compare) -c $(OBJDIR)$(@:.test=.pindbout)
	$(RM) -f $(OBJDIR)$(@:.test=.pindbin) $(OBJDIR)$(@:.test=.pindbout)

# This is a stress test for simultaneous debugger events.  Each thread stops when
# the thread is created, at a normal breakpoint, at a tool breakpoint, and stops
# when the thread exits.  There is no serialization in this variant of the test,
# so we expect that many events will be reported to the debugger simultaneously.
# The test verifies that we get all the events.
#
pindb-simultaneous-multi.test: $(OBJDIR)thread-$(OS_TYPE)$(EXE_SUFFIX) $(OBJDIR)simultaneous-toolbreak$(PINTOOL_SUFFIX)
	echo "set pinargs $(PIN_USERFLAGS) -t $(OBJDIR)simultaneous-toolbreak$(PINTOOL_SUFFIX)" > $(OBJDIR)$(@:.test=.pindbin)
	echo "run $(OBJDIR)thread-$(OS_TYPE)$(EXE_SUFFIX) -threads 8" >> $(OBJDIR)$(@:.test=.pindbin)
	$(OBJDIR)thread-$(OS_TYPE)$(EXE_SUFFIX) -print-address > $(OBJDIR)$(@:.test=.address)
	sed "s/GLOBAL_FUNCTION/`cat $(OBJDIR)$(@:.test=.address)`/" $(@:.test=.pindb) >> $(OBJDIR)$(@:.test=.pindbin)
	$(PINDB_WITH_LIBPATH) --pin=$(BARE_PIN) --timeout=$(TLIMIT) --cpu=$(TARGET) --noprompt \
        $(PINDB_USERFLAGS) < $(OBJDIR)$(@:.test=.pindbin) > $(OBJDIR)$(@:.test=.pindbout)
	$(PYCOMPARE) -p $(@:.test=.compare1) -c $(OBJDIR)$(@:.test=.pindbout)
	$(PYCOMPARE) -p $(@:.test=.compare2) -c $(OBJDIR)$(@:.test=.pindbout)
	$(PYCOMPARE) -p $(@:.test=.compare3) -c $(OBJDIR)$(@:.test=.pindbout)
	$(PYCOMPARE) -p $(@:.test=.compare4) -c $(OBJDIR)$(@:.test=.pindbout)
	$(RM) -f $(OBJDIR)$(@:.test=.pindbin) $(OBJDIR)$(@:.test=.pindbout) $(OBJDIR)$(@:.test=.address)

# This test is identical to the one above except that we don't stop when new
# threads are created or when they exit.  We use this test on Windows to avoid
# a problem with the virus scanner.  If a virus scan happens when this test runs,
# the scanner injects a new thread into the test application.  If the debugger
# stops when new threads are created, the scanner thread causes an extra stop in
# the debugger which causes the test to fail.  This variant of the test avoids
# the problem by not stopping in the debugger when new threads start or exit.
# We also run this test on Unix because it tests different code paths in Pin.
#
pindb-simple-simultaneous-multi.test: $(OBJDIR)thread-$(OS_TYPE)$(EXE_SUFFIX) $(OBJDIR)simultaneous-toolbreak$(PINTOOL_SUFFIX)
	echo "set pinargs $(PIN_USERFLAGS) -t $(OBJDIR)simultaneous-toolbreak$(PINTOOL_SUFFIX)" > $(OBJDIR)$(@:.test=.pindbin)
	echo "run $(OBJDIR)thread-$(OS_TYPE)$(EXE_SUFFIX) -threads 8" >> $(OBJDIR)$(@:.test=.pindbin)
	$(OBJDIR)thread-$(OS_TYPE)$(EXE_SUFFIX) -print-address > $(OBJDIR)$(@:.test=.address)
	sed "s/GLOBAL_FUNCTION/`cat $(OBJDIR)$(@:.test=.address)`/" $(@:.test=.pindb) >> $(OBJDIR)$(@:.test=.pindbin)
	$(PINDB_WITH_LIBPATH) --pin=$(BARE_PIN) --timeout=$(TLIMIT) --cpu=$(TARGET) --noprompt \
        $(PINDB_USERFLAGS) < $(OBJDIR)$(@:.test=.pindbin) > $(OBJDIR)$(@:.test=.pindbout)
	$(PYCOMPARE) -p $(@:.test=.compare1) -c $(OBJDIR)$(@:.test=.pindbout)
	$(PYCOMPARE) -p $(@:.test=.compare2) -c $(OBJDIR)$(@:.test=.pindbout)
	$(RM) -f $(OBJDIR)$(@:.test=.pindbin) $(OBJDIR)$(@:.test=.pindbout) $(OBJDIR)$(@:.test=.address)

# This is another stress test for simultaneous debugger events, similar to the
# one above.  In this variant, Pin delivers the events one-at-a-time to the
# debugger.  Again, we verifiy that the debugger gets them all.
#
pindb-simultaneous-multi-serialize.test: $(OBJDIR)thread-$(OS_TYPE)$(EXE_SUFFIX) $(OBJDIR)simultaneous-toolbreak$(PINTOOL_SUFFIX)
	echo "set pinargs $(PIN_USERFLAGS) -t $(OBJDIR)simultaneous-toolbreak$(PINTOOL_SUFFIX)" > $(OBJDIR)$(@:.test=.pindbin)
	echo "run $(OBJDIR)thread-$(OS_TYPE)$(EXE_SUFFIX) -threads 8" >> $(OBJDIR)$(@:.test=.pindbin)
	$(OBJDIR)thread-$(OS_TYPE)$(EXE_SUFFIX) -print-address > $(OBJDIR)$(@:.test=.address)
	sed "s/GLOBAL_FUNCTION/`cat $(OBJDIR)$(@:.test=.address)`/" $(@:.test=.pindb) >> $(OBJDIR)$(@:.test=.pindbin)
	$(PINDB_WITH_LIBPATH) --pin=$(BARE_PIN) --timeout=$(TLIMIT) --cpu=$(TARGET) \
	    --serialize-debugger-events --noprompt $(PINDB_USERFLAGS) \
	    < $(OBJDIR)$(@:.test=.pindbin) > $(OBJDIR)$(@:.test=.pindbout)
	$(PYCOMPARE) -p $(@:.test=.compare1) -c $(OBJDIR)$(@:.test=.pindbout)
	$(PYCOMPARE) -p $(@:.test=.compare2) -c $(OBJDIR)$(@:.test=.pindbout)
	$(PYCOMPARE) -p $(@:.test=.compare3) -c $(OBJDIR)$(@:.test=.pindbout)
	$(PYCOMPARE) -p $(@:.test=.compare4) -c $(OBJDIR)$(@:.test=.pindbout)
	$(RM) -f $(OBJDIR)$(@:.test=.pindbin) $(OBJDIR)$(@:.test=.pindbout) $(OBJDIR)$(@:.test=.address)

# This test is identical to the one above except that we don't stop when new
# threads are created or when they exit.  We use this test on Windows to avoid
# a problem with the virus scanner.  See "pindb-simple-simultaneous-multi.test"
# for more information.  We also run it on Unix because it tests different code
# paths in Pin.
#
pindb-simple-simultaneous-multi-serialize.test: $(OBJDIR)thread-$(OS_TYPE)$(EXE_SUFFIX) $(OBJDIR)simultaneous-toolbreak$(PINTOOL_SUFFIX)
	echo "set pinargs $(PIN_USERFLAGS) -t $(OBJDIR)simultaneous-toolbreak$(PINTOOL_SUFFIX)" > $(OBJDIR)$(@:.test=.pindbin)
	echo "run $(OBJDIR)thread-$(OS_TYPE)$(EXE_SUFFIX) -threads 8" >> $(OBJDIR)$(@:.test=.pindbin)
	$(OBJDIR)thread-$(OS_TYPE)$(EXE_SUFFIX) -print-address > $(OBJDIR)$(@:.test=.address)
	sed "s/GLOBAL_FUNCTION/`cat $(OBJDIR)$(@:.test=.address)`/" $(@:.test=.pindb) >> $(OBJDIR)$(@:.test=.pindbin)
	$(PINDB_WITH_LIBPATH) --pin=$(BARE_PIN) --timeout=$(TLIMIT) --cpu=$(TARGET) \
	    --serialize-debugger-events --noprompt $(PINDB_USERFLAGS) \
	    < $(OBJDIR)$(@:.test=.pindbin) > $(OBJDIR)$(@:.test=.pindbout)
	$(PYCOMPARE) -p $(@:.test=.compare1) -c $(OBJDIR)$(@:.test=.pindbout)
	$(PYCOMPARE) -p $(@:.test=.compare2) -c $(OBJDIR)$(@:.test=.pindbout)
	$(RM) -f $(OBJDIR)$(@:.test=.pindbin) $(OBJDIR)$(@:.test=.pindbout) $(OBJDIR)$(@:.test=.address)

# This is similar to "simultaneous-toolbreak-attach", but we use PinDB
# instead of GDB.  The application stops at several simultaneous breakpoints
# before PinDB attaches.  Since PinDB allows multiple simultaneous breakpoints,
# we expect all of them to be visible when PinDB attaches, and there will be
# no pending breakpoints.
#
# This is disabled on Windows, but it could probably be enabled there when Mantis #1839 is fixed.
#
pindb-simultaneous-toolbreak-attach.test: $(OBJDIR)thread-$(OS_TYPE)$(EXE_SUFFIX) $(OBJDIR)simultaneous-toolbreak$(PINTOOL_SUFFIX)
	$(RM) -f $(OBJDIR)$(@:.test=.out)
	$(PIN) $(PINFLAGS_DEBUG_RUNFREE) -t $(OBJDIR)simultaneous-toolbreak$(PINTOOL_SUFFIX) -sync_for_threads 4 \
	  -wait_for_debugger -port $(OBJDIR)$(@:.test=.port) -- $(OBJDIR)thread-$(OS_TYPE)$(EXE_SUFFIX) -threads 4 \
	    > $(OBJDIR)$(@:.test=.out) &
	count=0; \
	until $(GREP) 'Waiting for debugger to attach' $(OBJDIR)$(@:.test=.out) > /dev/null || $(BASHTEST) $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done
	$(PINDB_WITH_LIBPATH) --pin=$(BARE_PIN) --timeout=$(TLIMIT) --cpu=$(TARGET) --noprompt \
	    --gdb-protocol=:`cat $(OBJDIR)$(@:.test=.port)` $(PINDB_USERFLAGS) < $(@:.test=.pindbin) > \
	    $(OBJDIR)$(@:.test=.pindbout)
	$(PYCOMPARE) -p $(@:.test=.compare) -c $(OBJDIR)$(@:.test=.pindbout)
	$(RM) -f $(OBJDIR)$(@:.test=.pindbin) $(OBJDIR)$(@:.test=.pindbout) $(OBJDIR)$(@:.test=.address) \
	  $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.port)

# Test that we can use a custom command to change the register state of the target application,
# and then use the "invalidate registers" API to invalidate any stale register data in the
# debugger protocol library.
#
pindb-invalidate-regs.test: $(OBJDIR)simple$(EXE_SUFFIX) $(OBJDIR)invalidate-regs$(PINTOOL_SUFFIX)
	echo "set pinargs $(PIN_USERFLAGS) -t $(OBJDIR)invalidate-regs$(PINTOOL_SUFFIX)" > $(OBJDIR)$(@:.test=.pindbin)
	echo "run $(OBJDIR)simple$(EXE_SUFFIX)" >> $(OBJDIR)$(@:.test=.pindbin)
	cat $(@:.test=.pindb) >> $(OBJDIR)$(@:.test=.pindbin)
	$(PINDB_WITH_LIBPATH) --pin=$(BARE_PIN) --timeout=$(TLIMIT) --cpu=$(TARGET) \
	    --noprompt $(PINDB_USERFLAGS) < $(OBJDIR)$(@:.test=.pindbin) > $(OBJDIR)$(@:.test=.pindbout)
	$(PYCOMPARE) -p $(@:.test=.compare) -c $(OBJDIR)$(@:.test=.pindbout)
	$(RM) -f $(OBJDIR)$(@:.test=.pindbin) $(OBJDIR)$(@:.test=.pindbout)

# This test validates stopping threads API called in application thread.
app-pause-in-app-thread.test: $(OBJDIR)app-pause-in-app-thread-tool$(PINTOOL_SUFFIX) $(OBJDIR)app-pause-app$(EXE_SUFFIX)
	$(PIN) -t $(OBJDIR)app-pause-in-app-thread-tool$(PINTOOL_SUFFIX) \
	  -- $(OBJDIR)app-pause-app$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.out)
	$(CGREP) 'Threads stopped by application thread' $(OBJDIR)$(@:.test=.out) | $(QGREP) "3"
	$(RM) $(OBJDIR)$(@:.test=.out)

# This test validates stopping threads API called in internal thread.
app-pause-in-int-thread.test: $(OBJDIR)app-pause-in-int-thread-tool$(PINTOOL_SUFFIX) $(OBJDIR)app-pause-app$(EXE_SUFFIX)
	$(PIN) -t $(OBJDIR)app-pause-in-int-thread-tool$(PINTOOL_SUFFIX) \
	  -- $(OBJDIR)app-pause-app$(EXE_SUFFIX) > $(OBJDIR)$(@:.test=.out)
	$(CGREP) 'Threads stopped by internal thread' $(OBJDIR)$(@:.test=.out) | $(QGREP) "3"
	$(RM) $(OBJDIR)$(@:.test=.out)

check-if-thread-stopped.test: $(OBJDIR)thread-$(OS_TYPE)$(EXE_SUFFIX) $(OBJDIR)check-if-thread-stopped$(PINTOOL_SUFFIX)
	echo "set pinargs $(PIN_USERFLAGS) -t $(OBJDIR)check-if-thread-stopped$(PINTOOL_SUFFIX) -threads 4" \
	  -o $(OBJDIR)$(@:.test=.toolout) > $(OBJDIR)$(@:.test=.pindbin)
	echo "run $(OBJDIR)thread-$(OS_TYPE)$(EXE_SUFFIX) -threads 4" >> $(OBJDIR)$(@:.test=.pindbin)
	cat $(@:.test=.pindb) >> $(OBJDIR)$(@:.test=.pindbin)
	$(PINDB_WITH_LIBPATH) --pin=$(BARE_PIN) --timeout=$(TLIMIT) --cpu=$(TARGET) --noprompt \
	    $(PINDB_USERFLAGS) < $(OBJDIR)$(@:.test=.pindbin) > $(OBJDIR)$(@:.test=.pindbout)
	sleep 5
	$(PYCOMPARE) -p $(@:.test=.compare) -c $(OBJDIR)$(@:.test=.pindbout)
	$(QGREP) "Finished" $(OBJDIR)$(@:.test=.toolout)
	$(RM) -f $(OBJDIR)$(@:.test=.pindbin) $(OBJDIR)$(@:.test=.pindbout) $(OBJDIR)$(@:.test=.toolout)

# Tests GDB extension of retrieving loaded shared libraries
# Also, this test changes the base address of libc.so as seen
# by GDB to 0xd00dead and checks that GDB reports the expected
# base address.
#
gdb-svr4-libraries-extension.test: $(OBJDIR)dlopen-dlclose$(EXE_SUFFIX) $(OBJDIR)library-load-tool$(PINTOOL_SUFFIX)
	$(PIN) $(PINFLAGS_DEBUG) -t $(OBJDIR)library-load-tool$(PINTOOL_SUFFIX) -- \
	    $(OBJDIR)dlopen-dlclose$(EXE_SUFFIX) `$(CXX) $(COMP_OBJ) /dev/null -print-file-name=libm.so` > $(OBJDIR)$(@:.test=.out) &
	count=0; \
	until $(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) > /dev/null || $(BASHTEST) $$count -gt $(TLIMIT); \
	    do sleep 1; count=`expr $$count + 1`; done
	echo '$(BATCH_CMD_TIMEOUT_LIMIT)' > $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(GREP) '$(BATCH_CMD_CONNECT_REMOTE)' $(OBJDIR)$(@:.test=.out) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	cat $(@:.test=.$(DBG_STR)) >> $(OBJDIR)$(@:.test=.$(DBG_STR)in)
	$(DBG) $(DBG_CMD_SRC_FLAG) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(DBG_CMD_MORE_FLAGS) $(OBJDIR)dlopen-dlclose$(EXE_SUFFIX) \
	  > $(OBJDIR)$(@:.test=.$(DBG_STR)out) 2>&1
	$(PYCOMPARE) -p $(@:.test=.compare$(COMPARE_RE_FILE_SUFFIX)) -c $(OBJDIR)$(@:.test=.$(DBG_STR)out)
	$(RM) -f $(OBJDIR)$(@:.test=.out) $(OBJDIR)$(@:.test=.$(DBG_STR)in) $(OBJDIR)$(@:.test=.$(DBG_STR)out)


##############################################################
#
# Build rules
#
##############################################################

# This section contains the build rules for all binaries that have special build rules.
# See makefile.default.rules for the default build rules.

###### Special tools' build rules ######

$(OBJDIR)use-debugger-shell$(PINTOOL_SUFFIX): $(OBJDIR)use-debugger-shell$(OBJ_SUFFIX) $(OBJDIR)debugger-shell$(OBJ_SUFFIX)
	$(LINKER) $(TOOL_LDFLAGS) $(LINK_EXE)$@ $^ $(TOOL_LPATHS) $(TOOL_LIBS)

$(OBJDIR)set_xmm_scratches_before_breakpoint$(PINTOOL_SUFFIX): $(OBJDIR)set_xmm_scratches_before_breakpoint$(OBJ_SUFFIX) $(OBJDIR)set_xmm_scratches_asm$(OBJ_SUFFIX)
	$(LINKER) $(TOOL_LDFLAGS) $(LINK_EXE)$@ $^ $(TOOL_LPATHS) $(TOOL_LIBS)

$(OBJDIR)set_xmm_scratches_before_breakpoint_and_set_xmm_reg$(PINTOOL_SUFFIX): $(OBJDIR)set_xmm_scratches_before_breakpoint_and_set_xmm_reg$(OBJ_SUFFIX) $(OBJDIR)set_xmm_scratches_asm$(OBJ_SUFFIX)
	$(LINKER) $(TOOL_LDFLAGS) $(LINK_EXE)$@ $^ $(TOOL_LPATHS) $(TOOL_LIBS)

$(OBJDIR)set_xmm_scratches$(PINTOOL_SUFFIX): $(OBJDIR)set_xmm_scratches$(OBJ_SUFFIX) $(OBJDIR)set_xmm_scratches_asm$(OBJ_SUFFIX)
	$(LINKER) $(TOOL_LDFLAGS) $(LINK_EXE)$@ $^ $(TOOL_LPATHS) $(TOOL_LIBS)

$(OBJDIR)set_xmm_scratches_for_ymmtest$(PINTOOL_SUFFIX): $(OBJDIR)set_xmm_scratches_for_ymmtest$(OBJ_SUFFIX) $(OBJDIR)set_xmm_scratches_asm$(OBJ_SUFFIX)
	$(LINKER) $(TOOL_LDFLAGS) $(LINK_EXE)$@ $^ $(TOOL_LPATHS) $(TOOL_LIBS)

###### Special applications' build rules ######

$(OBJDIR)simple$(EXE_SUFFIX): simple.c
	$(APP_CC) $(APP_CXXFLAGS_NOOPT) $(DBG_INFO_CXX_ALWAYS) $(COMP_EXE)$@ $< $(APP_LDFLAGS_NOOPT) $(APP_LIBS) $(DBG_INFO_LD_ALWAYS)

$(OBJDIR)bphandler_app$(EXE_SUFFIX): bphandler_app.c
	$(APP_CC) $(APP_CXXFLAGS_NOOPT) $(DBG_INFO_CXX_ALWAYS) $(COMP_EXE)$@ $< $(APP_LDFLAGS_NOOPT) $(APP_LIBS) $(DBG_INFO_LD_ALWAYS)

$(OBJDIR)simple-static$(EXE_SUFFIX): simple.c
	$(APP_CC) $(APP_CXXFLAGS_NOOPT) $(DBG_INFO_CXX_ALWAYS) $(COMP_EXE)$@ $< $(APP_LDFLAGS_NOOPT) $(STATIC) $(APP_LIBS) $(DBG_INFO_LD_ALWAYS)

$(OBJDIR)exec$(EXE_SUFFIX): exec.cpp
	$(APP_CXX) $(APP_CXXFLAGS_NOOPT) $(DBG_INFO_CXX_ALWAYS) $(COMP_EXE)$@ $< $(APP_LDFLAGS_NOOPT) $(APP_LIBS) $(DBG_INFO_LD_ALWAYS)

$(OBJDIR)fork$(EXE_SUFFIX): fork.cpp
	$(APP_CXX) $(APP_CXXFLAGS_NOOPT) $(DBG_INFO_CXX_ALWAYS) $(COMP_EXE)$@ $< $(APP_LDFLAGS_NOOPT) $(APP_LIBS) $(DBG_INFO_LD_ALWAYS)

$(OBJDIR)bptest-$(TARGET)$(EXE_SUFFIX): bptest.cpp bptest-asm-$(TARGET).s
	$(APP_CXX) $(APP_CXXFLAGS_NOOPT) $(DBG_INFO_CXX_ALWAYS) $(COMP_EXE)$@ $^ $(APP_LDFLAGS_NOOPT) $(APP_LIBS) $(DBG_INFO_LD_ALWAYS)

$(OBJDIR)action-pending-app$(EXE_SUFFIX): action-pending-app.cpp
	$(APP_CXX) $(APP_CXXFLAGS_NOOPT) $(DBG_INFO_CXX_ALWAYS) $(COMP_EXE)$@ $< $(APP_LDFLAGS_NOOPT) $(APP_LIBS) $(DBG_INFO_LD_ALWAYS)

$(OBJDIR)xmm-$(TARGET)$(EXE_SUFFIX): xmm.c xmm-asm-$(TARGET).s
	$(APP_CC) $(APP_CXXFLAGS_NOOPT) $(DBG_INFO_CXX_ALWAYS) $(COMP_EXE)$@ $^ $(APP_LDFLAGS_NOOPT) $(APP_LIBS) $(DBG_INFO_LD_ALWAYS)

$(OBJDIR)thread$(EXE_SUFFIX): thread.cpp
	$(APP_CXX) $(APP_CXXFLAGS_NOOPT) $(DBG_INFO_CXX_ALWAYS) $(COMP_EXE)$@ $< $(APP_LDFLAGS_NOOPT) $(APP_LIBS) $(DBG_INFO_LD_ALWAYS)

$(OBJDIR)thread-static$(EXE_SUFFIX): thread.cpp
	$(APP_CXX) $(APP_CXXFLAGS_NOOPT) $(DBG_INFO_CXX_ALWAYS) $(COMP_EXE)$@ $< $(APP_LDFLAGS_NOOPT) $(STATIC) $(APP_LIBS) $(DBG_INFO_LD_ALWAYS)

$(OBJDIR)simple-pindb$(EXE_SUFFIX): simple-pindb.cpp $(OBJDIR)simple-pindb-asm-$(TARGET)$(OBJ_SUFFIX)
	$(APP_CXX) $(APP_CXXFLAGS_NOOPT) $(DBG_INFO_CXX_ALWAYS) $(COMP_EXE)$@ $^ $(APP_LDFLAGS_NOOPT) $(NO_RANDOM) $(APP_LIBS) $(DBG_INFO_LD_ALWAYS)

$(OBJDIR)checkpoint-app$(EXE_SUFFIX): checkpoint-app.c
	$(APP_CC) $(APP_CXXFLAGS_NOOPT) $(DBG_INFO_CXX_ALWAYS) $(COMP_EXE)$@ $< $(APP_LDFLAGS_NOOPT) $(APP_LIBS) $(DBG_INFO_LD_ALWAYS)

$(OBJDIR)watchpoint-app$(EXE_SUFFIX): watchpoint-app.c
	$(APP_CC) $(APP_CXXFLAGS_NOOPT) $(DBG_INFO_CXX_ALWAYS) $(COMP_EXE)$@ $< $(APP_LDFLAGS_NOOPT) $(APP_LIBS) $(DBG_INFO_LD_ALWAYS)

$(OBJDIR)callerapp$(EXE_SUFFIX): callerapp.c
	$(APP_CC) $(APP_CXXFLAGS_NOOPT) $(DBG_INFO_CXX_ALWAYS) $(COMP_EXE)$@ $< $(APP_LDFLAGS_NOOPT) $(APP_LIBS) $(DBG_INFO_LD_ALWAYS)

$(OBJDIR)fibonacci$(EXE_SUFFIX): $(TOOLS_ROOT)/ManualExamples/fibonacci.cpp
	$(APP_CXX) $(APP_CXXFLAGS_NOOPT) $(DBG_INFO_CXX_ALWAYS) $(COMP_EXE)$@ $< $(APP_LDFLAGS_NOOPT) $(APP_LIBS) $(DBG_INFO_LD_ALWAYS)

$(OBJDIR)sleep-unix$(EXE_SUFFIX): sleep-unix.c
	$(APP_CC) $(APP_CXXFLAGS_NOOPT) $(DBG_INFO_CXX_ALWAYS) $(COMP_EXE)$@ $< $(APP_LDFLAGS_NOOPT) $(APP_LIBS) $(DBG_INFO_LD_ALWAYS)

$(OBJDIR)debugger-shell-app-$(TARGET)$(EXE_SUFFIX): debugger-shell-app.cpp debugger-shell-app-$(TARGET).s
	$(APP_CXX) $(APP_CXXFLAGS_NOOPT) $(DBG_INFO_CXX_ALWAYS) $(COMP_EXE)$@ $^ $(APP_LDFLAGS_NOOPT) $(APP_LIBS) $(DBG_INFO_LD_ALWAYS)

$(OBJDIR)intercept-app$(EXE_SUFFIX): intercept-app.cpp intercept-app-asm-$(TARGET).s
	$(APP_CXX) $(APP_CXXFLAGS_NOOPT) $(DBG_INFO_CXX_ALWAYS) $(COMP_EXE)$@ $^ $(APP_LDFLAGS_NOOPT) $(APP_LIBS) $(DBG_INFO_LD_ALWAYS)

$(OBJDIR)ymm-$(TARGET)$(EXE_SUFFIX): ymm.cpp ymm-asm-$(TARGET).s
	$(APP_CXX) $(APP_CXXFLAGS_NOOPT) $(DBG_INFO_CXX_ALWAYS) $(COMP_EXE)$@ $^ $(APP_LDFLAGS_NOOPT) $(APP_LIBS) $(DBG_INFO_LD_ALWAYS)

$(OBJDIR)zmm-$(TARGET)$(EXE_SUFFIX): zmm.cpp $(OBJDIR)zmm-asm-$(TARGET)$(OBJ_SUFFIX)
	$(APP_CXX) $(APP_CXXFLAGS_NOOPT) $(DBG_INFO_CXX_ALWAYS) $(COMP_EXE)$@ $^ $(APP_LDFLAGS_NOOPT) $(APP_LIBS) $(DBG_INFO_LD_ALWAYS)

$(OBJDIR)pc-change-bp$(EXE_SUFFIX): pc-change-bp.cpp pc-change-bp-asm-$(TARGET).s
	$(APP_CXX) $(APP_CXXFLAGS_NOOPT) $(DBG_INFO_CXX_ALWAYS) $(COMP_EXE)$@ $^ $(APP_LDFLAGS_NOOPT) $(APP_LIBS) $(DBG_INFO_LD_ALWAYS)

$(OBJDIR)pc-change-async$(EXE_SUFFIX): pc-change-async.cpp pc-change-async-asm-$(TARGET).s
	$(APP_CXX) $(APP_CXXFLAGS_NOOPT) $(DBG_INFO_CXX_ALWAYS) $(COMP_EXE)$@ $^ $(APP_LDFLAGS_NOOPT) $(APP_LIBS) $(DBG_INFO_LD_ALWAYS)

$(OBJDIR)mt-exit$(EXE_SUFFIX): mt-exit.cpp
	$(APP_CXX) $(APP_CXXFLAGS_NOOPT) $(DBG_INFO_CXX_ALWAYS) $(COMP_EXE)$@ $< $(APP_LDFLAGS_NOOPT) $(APP_LIBS) $(DBG_INFO_LD_ALWAYS)

$(OBJDIR)signal-catch$(EXE_SUFFIX): signal-catch.cpp
	$(APP_CXX) $(APP_CXXFLAGS_NOOPT) $(DBG_INFO_CXX_ALWAYS) $(COMP_EXE)$@ $< $(APP_LDFLAGS_NOOPT) $(APP_LIBS) $(DBG_INFO_LD_ALWAYS)

$(OBJDIR)win-unhandled-exception$(EXE_SUFFIX): win-unhandled-exception.cpp
	$(APP_CXX) $(APP_CXXFLAGS_NOOPT) $(DBG_INFO_CXX_ALWAYS) $(COMP_EXE)$@ $< $(APP_LDFLAGS_NOOPT) $(APP_LIBS) $(DBG_INFO_LD_ALWAYS)
 
$(OBJDIR)win-handled-exception$(EXE_SUFFIX): win-handled-exception.cpp
	$(APP_CXX) $(APP_CXXFLAGS_NOOPT) $(DBG_INFO_CXX_ALWAYS) $(COMP_EXE)$@ $< $(APP_LDFLAGS_NOOPT) $(APP_LIBS) $(DBG_INFO_LD_ALWAYS)

$(OBJDIR)win-continued-exception1$(EXE_SUFFIX): win-continued-exception1.cpp
	$(APP_CXX) $(APP_CXXFLAGS_NOOPT) $(DBG_INFO_CXX_ALWAYS) $(COMP_EXE)$@ $< $(APP_LDFLAGS_NOOPT) $(APP_LIBS) $(DBG_INFO_LD_ALWAYS)

$(OBJDIR)win-continued-exception2$(EXE_SUFFIX): win-continued-exception2.cpp
	$(APP_CXX) $(APP_CXXFLAGS_NOOPT) $(DBG_INFO_CXX_ALWAYS) $(COMP_EXE)$@ $< $(APP_LDFLAGS_NOOPT) $(APP_LIBS) $(DBG_INFO_LD_ALWAYS)

$(OBJDIR)win-software-exception$(EXE_SUFFIX): win-software-exception.cpp
	$(APP_CXX) $(APP_CXXFLAGS_NOOPT) $(DBG_INFO_CXX_ALWAYS) $(COMP_EXE)$@ $< $(APP_LDFLAGS_NOOPT) $(APP_LIBS) $(DBG_INFO_LD_ALWAYS)

$(OBJDIR)win-cpp-exception$(EXE_SUFFIX): win-cpp-exception.cpp
	$(APP_CXX) $(APP_CXXFLAGS_NOOPT) $(DBG_INFO_CXX_ALWAYS) $(COMP_EXE)$@ $< $(APP_LDFLAGS_NOOPT) $(APP_LIBS) $(DBG_INFO_LD_ALWAYS)

$(OBJDIR)win-exception-after-exit$(EXE_SUFFIX): win-exception-after-exit.cpp $(OBJDIR)$(DLL_PREFIX)win-exception-after-exit-dll$(DLL_SUFFIX)
	$(APP_CXX) $(APP_CXXFLAGS) $(COMP_EXE)$@ $< $(APP_LDFLAGS) $(APP_LIBS) $(OBJDIR)win-exception-after-exit-dll$(LIB_SUFFIX)

$(OBJDIR)win-load-library$(EXE_SUFFIX): win-load-library.cpp
	$(APP_CXX) $(APP_CXXFLAGS_NOOPT) $(DBG_INFO_CXX_ALWAYS) $(COMP_EXE)$@ $< $(APP_LDFLAGS_NOOPT) $(APP_LIBS) $(DBG_INFO_LD_ALWAYS)

$(OBJDIR)reattach-loop$(EXE_SUFFIX): reattach-loop.cpp
	$(APP_CXX) $(APP_CXXFLAGS_NOOPT) $(NO_PIC) $(DBG_INFO_CXX_ALWAYS) $(COMP_EXE)$@ $< $(APP_LDFLAGS_NOOPT) $(APP_LIBS) $(DBG_INFO_LD_ALWAYS)

$(OBJDIR)win-thread-stress$(EXE_SUFFIX): win-thread-stress.cpp
	$(APP_CXX) $(APP_CXXFLAGS_NOOPT) $(DBG_INFO_CXX_ALWAYS) $(COMP_EXE)$@ $< $(APP_LDFLAGS_NOOPT) $(APP_LIBS) $(DBG_INFO_LD_ALWAYS)

$(OBJDIR)pthread-bare-exit$(EXE_SUFFIX): pthread-bare-exit.cpp pthread-bare-exit-asm-$(TARGET).s
	$(APP_CXX) $(APP_CXXFLAGS_NOOPT) $(DBG_INFO_CXX_ALWAYS) $(COMP_EXE)$@ $^ $(APP_LDFLAGS_NOOPT) $(APP_LIBS) $(DBG_INFO_LD_ALWAYS)

$(OBJDIR)pthread-bare-exitgroup$(EXE_SUFFIX): pthread-bare-exitgroup.cpp pthread-bare-exitgroup-asm-$(TARGET).s
	$(APP_CXX) $(APP_CXXFLAGS_NOOPT) $(DBG_INFO_CXX_ALWAYS) $(COMP_EXE)$@ $^ $(APP_LDFLAGS_NOOPT) $(APP_LIBS) $(DBG_INFO_LD_ALWAYS)

# A simple threaded application that we use for several tests.  Both Windows and Posix (Unix)
# versions export the function "GlobalFunction()", which the tests rely on.
#
$(OBJDIR)thread-$(OS_TYPE)$(EXE_SUFFIX): thread-$(OS_TYPE).cpp
	$(APP_CXX) $(COMPONENT_INCLUDES) $(APP_CXXFLAGS_NOOPT) $(DBG_INFO_CXX_ALWAYS) $(COMP_EXE)$@ $< $(APP_LDFLAGS_NOOPT) $(APP_LIBS) $(DBG_INFO_LD_ALWAYS)

$(OBJDIR)app-pause-app$(EXE_SUFFIX): app-pause-app.cpp $(THREADLIB)
	$(APP_CXX) $(COMPONENT_INCLUDES) $(APP_CXXFLAGS) $(COMP_EXE)$@ $^ $(APP_LDFLAGS) $(APP_LPATHS) $(APP_LIBS) $(APP_LIB_ATOMIC)

###### Special objects' build rules ######

$(OBJDIR)stack-debugger$(OBJ_SUFFIX): $(TOOLS_ROOT)/ManualExamples/stack-debugger.cpp
	$(CXX) $(TOOL_CXXFLAGS) $(COMP_OBJ)$@ $<

$(OBJDIR)debugger-shell$(OBJ_SUFFIX): $(TOOLS_ROOT)/InstLib/debugger-shell.cpp
	$(CXX) $(TOOL_CXXFLAGS) $(SUPPRESS_WARNING_ALIGNED_NEW) $(COMP_OBJ)$@ $<

$(OBJDIR)start-fini-callback$(OBJ_SUFFIX): start-fini-callback.cpp
	$(CXX) $(TOOL_CXXFLAGS) $(COMP_OBJ)$@ $<

$(OBJDIR)simple-pindb-asm-$(TARGET)$(OBJ_SUFFIX): simple-pindb-asm-$(TARGET)$(ASM_SUFFIX)
	$(ASMBLR) $(ASM_FLAGS) $(DBG_INFO_CXX_ALWAYS) $(COMP_OBJ)$@ $<

$(OBJDIR)win-foo-library$(OBJ_SUFFIX): win-foo-library.cpp
	$(APP_CXX) $(APP_CXXFLAGS_NOOPT) $(DLL_CXXFLAGS) $(DBG_INFO_CXX_ALWAYS) $(COMP_OBJ)$@ $<

$(OBJDIR)set_xmm_scratches_asm$(OBJ_SUFFIX): set_xmm_scratches_$(TARGET)$(ASM_SUFFIX)
	$(ASMBLR) $(ASM_FLAGS) $(DBG_INFO_CXX_ALWAYS) $(COMP_OBJ)$@ $<

###### Special dlls' build rules ######

$(OBJDIR)$(DLL_PREFIX)win-foo-library$(DLL_SUFFIX): $(OBJDIR)win-foo-library$(OBJ_SUFFIX)
	$(LINKER) $(APP_LDFLAGS_NOOPT) $(DLL_LDFLAGS) $(LINK_EXE)$@ $< $(APP_LIBS) $(DBG_INFO_LD_ALWAYS)

$(OBJDIR)$(DLL_PREFIX)win-exception-after-exit-dll$(DLL_SUFFIX): win-exception-after-exit-dll.cpp
	$(APP_CXX) $(APP_CXXFLAGS) $(DLL_CXXFLAGS) $(COMP_EXE)$@ $< $(APP_LDFLAGS) $(DLL_LDFLAGS) $(APP_LIBS)