diff --git a/riscv-pk/.gitignore b/riscv-pk/.gitignore new file mode 100644 index 0000000..8595aa6 --- /dev/null +++ b/riscv-pk/.gitignore @@ -0,0 +1,11 @@ +#========================================================================= +# Git Ignore Files +#========================================================================= +# We explicitly ignore a default build directory and the autoconf +# generated autom4te.cache directory. This makes it easy to do a clean +# build under the source directory and still have it appear clean to git. + +build/ +autom4te.cache/ +*.swp +*~ diff --git a/riscv-pk/LICENSE b/riscv-pk/LICENSE new file mode 100644 index 0000000..53e0e66 --- /dev/null +++ b/riscv-pk/LICENSE @@ -0,0 +1,24 @@ +Copyright (c) 2013, The Regents of the University of California (Regents). +All Rights Reserved. + +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions are met: +1. Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. +2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. +3. Neither the name of the Regents nor the + names of its contributors may be used to endorse or promote products + derived from this software without specific prior written permission. + +IN NO EVENT SHALL REGENTS BE LIABLE TO ANY PARTY FOR DIRECT, INDIRECT, +SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING LOST PROFITS, ARISING +OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF REGENTS HAS +BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +REGENTS SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, BUT NOT LIMITED TO, +THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE SOFTWARE AND ACCOMPANYING DOCUMENTATION, IF ANY, PROVIDED +HEREUNDER IS PROVIDED "AS IS". REGENTS HAS NO OBLIGATION TO PROVIDE +MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. diff --git a/riscv-pk/Makefile.in b/riscv-pk/Makefile.in new file mode 100644 index 0000000..0268629 --- /dev/null +++ b/riscv-pk/Makefile.in @@ -0,0 +1,455 @@ +#========================================================================= +# Toplevel Makefile for the Modular C++ Build System +#========================================================================= +# Please read the documenation in 'mcppbs-doc.txt' for more details on +# how the Modular C++ Build System works. For most projects, a developer +# will not need to make any changes to this makefile. The key targets +# are as follows: +# +# - default : build all libraries and programs +# - check : build and run all unit tests +# - install : install headers, project library, and some programs +# - clean : remove all generated content (except autoconf files) +# - dist : make a source tarball +# - distcheck : make a source tarball, untar it, check it, clean it +# - distclean : remove everything +# + +#------------------------------------------------------------------------- +# Basic setup +#------------------------------------------------------------------------- + +# Remove all default implicit rules since they can cause subtle bugs +# and they just make things run slower +.SUFFIXES: +% : %,v +% : RCS/%,v +% : RCS/% +% : s.% +% : SCCS/s.% + +# Default is to build the prereqs of the all target (defined at bottom) +default : all +.PHONY : default + +project_name := @PACKAGE_TARNAME@ +src_dir := @srcdir@ +scripts_dir := $(src_dir)/scripts + +# If the version information is not in the configure script, then we +# assume that we are in a working directory. We use the vcs-version.sh +# script in the scripts directory to generate an appropriate version +# string. Currently the way things are setup we have to run this script +# everytime we run make so the script needs to be as fast as possible. + +ifeq (@PACKAGE_VERSION@,?) + project_ver:=$(shell $(scripts_dir)/vcs-version.sh $(src_dir)) +else + project_ver:=@PACKAGE_VERSION@ +endif + +# Installation directories + +prefix := @prefix@ +enable_stow := @enable_stow@ + +ifeq ($(enable_stow),yes) + stow_pkg_dir := $(prefix)/pkgs + INSTALLDIR ?= $(DESTDIR)/$(stow_pkg_dir)/$(project_name)-$(project_ver) +else + INSTALLDIR ?= $(DESTDIR)/$(prefix)/@install_subdir@ +endif + +install_hdrs_dir := $(INSTALLDIR)/include/$(project_name) +install_libs_dir := $(INSTALLDIR)/lib/$(project_name) +install_exes_dir := $(INSTALLDIR)/bin + +#------------------------------------------------------------------------- +# List of subprojects +#------------------------------------------------------------------------- + +sprojs := @subprojects@ +sprojs_enabled := @subprojects_enabled@ + +sprojs_include := -I. $(addprefix -I$(src_dir)/, $(sprojs_enabled)) +VPATH := $(addprefix $(src_dir)/, $(sprojs_enabled)) + +#------------------------------------------------------------------------- +# Programs and flags +#------------------------------------------------------------------------- + +# C++ compiler +# - CPPFLAGS : flags for the preprocessor (eg. -I,-D) +# - CXXFLAGS : flags for C++ compiler (eg. -Wall,-g,-O3) + +CC := @CC@ +READELF := @READELF@ +OBJCOPY := @OBJCOPY@ +CFLAGS := @CFLAGS@ $(CFLAGS) -DBBL_PAYLOAD=\"bbl_payload\" -DBBL_LOGO_FILE=\"bbl_logo_file\" +BBL_PAYLOAD := @BBL_PAYLOAD@ +COMPILE := $(CC) -MMD -MP $(CFLAGS) \ + $(sprojs_include) +# Linker +# - LDFLAGS : Flags for the linker (eg. -L) +# - LIBS : Library flags (eg. -l) + +LD := $(CC) +LDFLAGS := @LDFLAGS@ -nostartfiles -nostdlib -static $(LDFLAGS) +LIBS := @LIBS@ +LINK := $(LD) $(LDFLAGS) + +# Library creation + +AR := @AR@ +RANLIB := @RANLIB@ + +# Host simulator + +RUN := @RUN@ +RUNFLAGS := @RUNFLAGS@ + +# Installation + +MKINSTALLDIRS := $(scripts_dir)/mk-install-dirs.sh +INSTALL := @INSTALL@ +INSTALL_HDR := $(INSTALL) -m 444 +INSTALL_LIB := $(INSTALL) -m 644 +INSTALL_EXE := $(INSTALL) -m 555 +STOW := @stow@ + +#------------------------------------------------------------------------- +# Include subproject makefile fragments +#------------------------------------------------------------------------- + +sprojs_mk = $(addsuffix .mk, $(sprojs_enabled)) + +-include $(sprojs_mk) + +dist_junk += $(sprojs_mk) + +#------------------------------------------------------------------------- +# Reverse list helper function +#------------------------------------------------------------------------- +# This function is used by the subproject template to reverse the list +# of dependencies. It uses recursion to perform the reversal. +# +# Arguments: +# $(1) : space separated input list +# retval : input list in reverse order +# + +reverse_list = $(call reverse_list_h,$(1),) +define reverse_list_h + $(if $(strip $(1)), \ + $(call reverse_list_h, \ + $(wordlist 2,$(words $(1)),$(1)), \ + $(firstword $(1)) $(2)), \ + $(2)) +endef + +#------------------------------------------------------------------------- +# Template for per subproject rules +#------------------------------------------------------------------------- +# The template is instantiated for each of the subprojects. It relies on +# subprojects defining a certain set of make variables which are all +# prefixed with the subproject name. Since subproject names can have +# dashes in them (and the make variables are assumed to only use +# underscores) the template takes two arguments - one with the regular +# subproject name and one with dashes replaced with underscores. +# +# Arguments: +# $(1) : real subproject name (ie with dashes) +# $(2) : normalized subproject name (ie dashes replaced with underscores) +# + +define subproject_template + +# In some (rare) cases, a subproject might not have any actual object +# files. It might only include header files or program sources. To keep +# things consistent we still want a library for this subproject, so in +# this spectial case we create a dummy source file and thus the build +# system will create a library for this subproject with just the +# corresponding dummy object file. + +ifeq ($$(strip $$($(2)_c_srcs)),) +$(2)_c_srcs += _$(1).c +$(2)_junk += _$(1).c +endif + +_$(1).c : + echo "int _$(2)( int arg ) { return arg; }" > $$@ + +# Build the object files for this subproject + +$(2)_c_objs := $$(patsubst %.c, %.o, $$($(2)_c_srcs)) +$(2)_asm_objs := $$(patsubst %.S, %.o, $$($(2)_asm_srcs)) +$(2)_c_deps := $$(patsubst %.o, %.d, $$($(2)_c_objs)) +$$($(2)_c_objs) : %.o : %.c + $(COMPILE) -c $$< +$$($(2)_asm_objs) : %.o : %.S + $(COMPILE) -c $$< + +$(2)_junk += $$($(2)_c_objs) $$($(2)_c_deps) $$($(2)_asm_objs) + +# Build a library for this subproject + +lib$(1).a : $$($(2)_c_objs) $$($(2)_asm_objs) + $(AR) rcv $$@ $$^ + $(RANLIB) $$@ + +$(2)_junk += lib$(1).a + +# Reverse the dependency list so that a given subproject only depends on +# subprojects listed to its right. This is the correct order for linking +# the list of subproject libraries. + +$(2)_reverse_deps := $$(call reverse_list,$$($(2)_subproject_deps)) + +# Build unit tests + +$(2)_test_objs := $$(patsubst %.c, %.o, $$($(2)_test_srcs)) +$(2)_test_deps := $$(patsubst %.o, %.d, $$($(2)_test_objs)) +$(2)_test_exes := $$(patsubst %.t.c, %-utst, $$($(2)_test_srcs)) +$(2)_test_outs := $$(patsubst %, %.out, $$($(2)_test_exes)) +$(2)_test_libs := $(1) $$($(2)_reverse_deps) utst +$(2)_test_libnames := $$(patsubst %, lib%.a, $$($(2)_test_libs)) +$(2)_test_libarg := -L. $$(patsubst %, -l%, $$($(2)_test_libs)) + +$$($(2)_test_objs) : %.o : %.c + $(COMPILE) -c $$< + +$$($(2)_test_exes) : %-utst : %.t.o $$($(2)_test_libnames) + $(LINK) -o $$@ $$< $$($(2)_test_libarg) $(LIBS) + +$(2)_c_deps += $$($(2)_test_deps) +$(2)_junk += \ + $$($(2)_test_objs) $$($(2)_test_deps) \ + $$($(2)_test_exes) *.junk-dat + +# Run unit tests + +$$($(2)_test_outs) : %.out : % + $(RUN) $(RUNFLAGS) ./$$< default | tee $$@ + +$(2)_junk += $$($(2)_test_outs) + +# Build programs + +$(2)_prog_objs := $$(patsubst %.c, %.o, $$($(2)_prog_srcs)) +$(2)_prog_deps := $$(patsubst %.o, %.d, $$($(2)_prog_objs)) +$(2)_prog_exes := $$(patsubst %.c, %, $$($(2)_prog_srcs)) +$(2)_prog_libs := $(1) $$($(2)_reverse_deps) +$(2)_prog_libnames := $$(patsubst %, lib%.a, $$($(2)_prog_libs)) +$(2)_prog_libarg := -L. $$(patsubst %, -l%, $$($(2)_prog_libs)) + +$$($(2)_prog_objs) : %.o : %.c + $(COMPILE) -c $$< + +$$($(2)_prog_exes) : % : %.o $$($(2)_prog_libnames) + $(LINK) -o $$@ $$< $$($(2)_prog_libarg) $(LIBS) + +$(2)_c_deps += $$($(2)_prog_deps) +$(2)_junk += $$($(2)_prog_objs) $$($(2)_prog_deps) $$($(2)_prog_exes) + +# Build programs which will be installed + +$(2)_install_prog_objs := $$(patsubst %.c, %.o, $$($(2)_install_prog_srcs)) +$(2)_install_prog_deps := $$(patsubst %.o, %.d, $$($(2)_install_prog_objs)) +$(2)_install_prog_exes := $$(patsubst %.c, %, $$($(2)_install_prog_srcs)) + +$$($(2)_install_prog_objs) : %.o : %.c + $(COMPILE) -c $$< + +$$($(2)_install_prog_exes) : % : %.o $$($(2)_prog_libnames) + $(LINK) -o $$@ $$< $$($(2)_prog_libarg) $(LIBS) -T $(src_dir)/$(2)/$(2).lds + +$(2)_c_deps += $$($(2)_install_prog_deps) +$(2)_junk += \ + $$($(2)_install_prog_objs) $$($(2)_install_prog_deps) \ + $$($(2)_install_prog_exes) + +# Subproject specific targets + +all-$(1) : lib$(1).a $$($(2)_install_prog_exes) + +check-$(1) : $$($(2)_test_outs) + echo; grep -h -e'Unit Tests' -e'FAILED' -e'Segementation' $$^; echo + +clean-$(1) : + rm -rf $$($(2)_junk) + +.PHONY : all-$(1) check-$(1) clean-$(1) + +# Update running variables + +libs += lib$(1).a +objs += $$($(2)_c_objs) +srcs += $$(addprefix $(src_dir)/$(1)/, $$($(2)_c_srcs)) +hdrs += $$(addprefix $(src_dir)/$(1)/, $$($(2)_hdrs)) +junk += $$($(2)_junk) +deps += $$($(2)_c_deps) + +test_outs += $$($(2)_test_outs) + +install_hdrs += $$(addprefix $(src_dir)/$(1)/, $$($(2)_hdrs)) +install_libs += lib$(1).a +install_exes += $$($(2)_install_prog_exes) + +endef + +# Iterate over the subprojects and call the template for each one + +$(foreach sproj,$(sprojs_enabled), \ + $(eval $(call subproject_template,$(sproj),$(subst -,_,$(sproj))))) + +#------------------------------------------------------------------------- +# Autodependency files +#------------------------------------------------------------------------- + +-include $(deps) + +deps : $(deps) +.PHONY : deps + +#------------------------------------------------------------------------- +# Check +#------------------------------------------------------------------------- + +check : $(test_outs) + echo; grep -h -e'Unit Tests' -e'FAILED' -e'Segementation' $^; echo + +.PHONY : check + +#------------------------------------------------------------------------- +# Installation +#------------------------------------------------------------------------- + +install-hdrs : $(install_hdrs) + $(MKINSTALLDIRS) $(install_hdrs_dir) + for file in $(install_hdrs); \ + do \ + $(INSTALL_HDR) $$file $(install_hdrs_dir); \ + done + +install-libs : $(install_libs) + $(MKINSTALLDIRS) $(install_libs_dir) + for file in $(install_libs); \ + do \ + $(INSTALL_LIB) $$file $(install_libs_dir); \ + done + +install-exes : $(install_exes) + $(MKINSTALLDIRS) $(install_exes_dir) + for file in $(install_exes); \ + do \ + $(INSTALL_EXE) $$file $(install_exes_dir); \ + done + +install : install-hdrs install-libs install-exes +ifeq ($(enable_stow),yes) + $(MKINSTALLDIRS) $(stow_pkg_dir) + cd $(stow_pkg_dir) && \ + $(STOW) --delete $(project_name)-* && \ + $(STOW) $(project_name)-$(project_ver) +endif + +.PHONY : install install-hdrs install-libs install-exes + +#------------------------------------------------------------------------- +# Regenerate configure information +#------------------------------------------------------------------------- + +config.status : $(src_dir)/configure + ./config.status --recheck + +sprojs_mk_in = \ + $(join $(addprefix $(src_dir)/, $(sprojs_enabled)), \ + $(patsubst %, /%.mk.in, $(sprojs_enabled))) + +Makefile : $(src_dir)/Makefile.in $(sprojs_mk_in) config.status + ./config.status + +dist_junk += config.status config.h Makefile config.log + +#------------------------------------------------------------------------- +# Distribution +#------------------------------------------------------------------------- +# The distribution tarball is named project-ver.tar.gz and it includes +# both enabled and disabled subprojects. + +dist_files = \ + $(sprojs) \ + README \ + style-guide.txt \ + mcppbs-uguide.txt \ + scripts \ + configure.ac \ + aclocal.m4 \ + configure \ + config.h.in \ + Makefile.in \ + +dist_dir := $(project_name)-$(project_ver) +dist_tgz := $(project_name)-$(project_ver).tar.gz + +# Notice that when we make the distribution we rewrite the configure.ac +# script with the current version and we rerun autoconf in the new +# source directory so that the distribution will have the proper version +# information. We also rewrite the "Version : " line in the README. + +dist : + rm -rf $(dist_dir) + mkdir $(dist_dir) + tar -C $(src_dir) -cf - $(dist_files) | tar -C $(dist_dir) -xpf - + sed -i.bak 's/^\(# Version :\).*/\1 $(project_ver)/' $(dist_dir)/README + sed -i.bak 's/\( proj_version,\).*/\1 [$(project_ver)])/' $(dist_dir)/configure.ac + cd $(dist_dir) && \ + autoconf && autoheader && \ + rm -rf autom4te.cache configure.ac.bak README.bak + tar -czvf $(dist_tgz) $(dist_dir) + rm -rf $(dist_dir) + +# You can use the distcheck target to try untarring the distribution and +# then running configure, make, make check, and make distclean. A +# "directory is not empty" error means distclean is not removing +# everything. + +distcheck : dist + rm -rf $(dist_dir) + tar -xzvf $(dist_tgz) + mkdir -p $(dist_dir)/build + cd $(dist_dir)/build; ../configure; make; make check; make distclean + rm -rf $(dist_dir) + +junk += $(project_name)-*.tar.gz + +.PHONY : dist distcheck + +#------------------------------------------------------------------------- +# Default +#------------------------------------------------------------------------- + +all : $(install_hdrs) $(install_libs) $(install_exes) +.PHONY : all + +#------------------------------------------------------------------------- +# Makefile debugging +#------------------------------------------------------------------------- +# This handy rule will display the contents of any make variable by +# using the target debug-. So for example, make debug-junk will +# display the contents of the junk variable. + +debug-% : + @echo $* = $($*) + +#------------------------------------------------------------------------- +# Clean up junk +#------------------------------------------------------------------------- + +clean : + rm -rf *~ \#* $(junk) + +distclean : + rm -rf *~ \#* $(junk) $(dist_junk) + +.PHONY : clean distclean diff --git a/riscv-pk/README.md b/riscv-pk/README.md new file mode 100644 index 0000000..799234a --- /dev/null +++ b/riscv-pk/README.md @@ -0,0 +1,40 @@ +RISC-V Proxy Kernel and Boot Loader +===================================== + +About +--------- + +The RISC-V Proxy Kernel, `pk`, is a lightweight application execution +environment that can host statically-linked RISC-V ELF binaries. It is +designed to support tethered RISC-V implementations with limited I/O +capability and and thus handles I/O-related system calls by proxying them to +a host computer. + +This package also contains the Berkeley Boot Loader, `bbl`, which is a +supervisor execution environment for tethered RISC-V systems. It is +designed to host the RISC-V Linux port. + +Build Steps +--------------- + +We assume that the RISCV environment variable is set to the RISC-V tools +install path, and that the riscv-gnu-toolchain package is installed. +Please note that building the binaries directly inside the source +directory is not supported; you need to use a separate build directory. + + $ mkdir build + $ cd build + $ ../configure --prefix=$RISCV --host=riscv64-unknown-elf + $ make + $ make install + +Alternatively, the GNU/Linux toolchain may be used to build this package, +by setting `--host=riscv64-unknown-linux-gnu`. + +By default, 64-bit (RV64) versions of `pk` and `bbl` are built. To +built 32-bit (RV32) versions, supply a `--enable-32bit` flag to the +configure command. + +The `install` step installs 64-bit build products into +`$RISCV/riscv64-unknown-elf`, and 32-bit versions into +`$RISCV/riscv32-unknown-elf`. diff --git a/riscv-pk/aclocal.m4 b/riscv-pk/aclocal.m4 new file mode 100644 index 0000000..55a8b70 --- /dev/null +++ b/riscv-pk/aclocal.m4 @@ -0,0 +1,333 @@ +#========================================================================= +# Local Autoconf Macros +#========================================================================= +# This file contains the macros for the Modular C++ Build System and +# additional autoconf macros which developers can use in their +# configure.ac scripts. Please read the documentation in +# 'mcppbs-doc.txt' for more details on how the Modular C++ Build System +# works. The documenation for each macro should include information +# about the author, date, and copyright. + +#------------------------------------------------------------------------- +# MCPPBS_PROG_INSTALL +#------------------------------------------------------------------------- +# This macro will add an --enable-stow command line option to the +# configure script. When enabled, this macro will first check to see if +# the stow program is available and if so it will set the $stow shell +# variable to the binary name and the $enable_stow shell variable to +# "yes". These variables can be used in a makefile to conditionally use +# stow for installation. +# +# This macro uses two environment variables to help setup default stow +# locations. The $STOW_PREFIX is used for stowing native built packages. +# The packages are staged in $STOW_PREFIX/pkgs and then symlinks are +# created from within $STOW_PREFIX into the pkgs subdirectory. If you +# only do native builds then this is all you need to set. If you don't +# set $STOW_PREFIX then the default is just the normal default prefix +# which is almost always /usr/local. +# +# For non-native builds we probably want to install the packages in a +# different location which includes the host architecture name as part +# of the prefix. For these kind of builds, we can specify the $STOW_ROOT +# environment variable and the effective prefix will be +# $STOW_ROOT/${host_alias} where ${host_alias} is specified on the +# configure command line with "--host". +# +# Here is an example setup: +# +# STOW_ROOT="$HOME/install" +# STOW_ARCH="i386-macosx10.4" +# STOW_PREFIX="${STOW_ROOT}/${STOW_ARCH}" +# + +AC_DEFUN([MCPPBS_PROG_INSTALL], +[ + + # Configure command line option + + AC_ARG_ENABLE(stow, + AS_HELP_STRING(--enable-stow,[Enable stow-based install]), + [enable_stow="yes"],[enable_stow="no"]) + + AC_SUBST([enable_stow]) + + # Environment variables + + AC_ARG_VAR([STOW_ROOT], [Root for non-native stow-based installs]) + AC_ARG_VAR([STOW_PREFIX], [Prefix for stow-based installs]) + + # Check for install script + + AC_PROG_INSTALL + + # Deterimine if native build and set prefix appropriately + + AS_IF([ test ${enable_stow} = "yes" ], + [ + AC_CHECK_PROGS([stow],[stow],[no]) + AS_IF([ test ${stow} = "no" ], + [ + AC_MSG_ERROR([Cannot use --enable-stow since stow is not available]) + ]) + + # Check if native or non-native build + + AS_IF([ test "${build}" = "${host}" ], + [ + + # build == host so this is a native build. Make sure --prefix not + # set and $STOW_PREFIX is set, then set prefix=$STOW_PREFIX. + + AS_IF([ test "${prefix}" = "NONE" && test -n "${STOW_PREFIX}" ], + [ + prefix="${STOW_PREFIX}" + AC_MSG_NOTICE([Using \$STOW_PREFIX from environment]) + AC_MSG_NOTICE([prefix=${prefix}]) + ]) + + ],[ + + # build != host so this is a non-native build. Make sure --prefix + # not set and $STOW_ROOT is set, then set + # prefix=$STOW_ROOT/${host_alias}. + + AS_IF([ test "${prefix}" = "NONE" && test -n "${STOW_ROOT}" ], + [ + prefix="${STOW_ROOT}/${host_alias}" + AC_MSG_NOTICE([Using \$STOW_ROOT from environment]) + AC_MSG_NOTICE([prefix=${prefix}]) + ]) + + ]) + + ]) + +]) + +#------------------------------------------------------------------------- +# MCPPBS_SUBPROJECTS([ sproj1, sproj2, ... ]) +#------------------------------------------------------------------------- +# The developer should call this macro with a list of the subprojects +# which make up this project. One should order the list such that any +# given subproject only depends on subprojects listed before it. The +# subproject names can also include an * suffix which indicates that +# this is an optional subproject. Optional subprojects are only included +# as part of the project build if enabled on the configure command line +# with a --enable- flag. The user can also specify that all +# optional subprojects should be included in the build with the +# --enable-optional-subprojects flag. +# +# Subproject names can also include a ** suffix which indicates that it +# is an optional subproject, but there is a group with the same name. +# Thus the --enable- command line option will enable not just the +# subproject sproj but all of the subprojects which are in the group. +# There is no error checking to make sure that if you use the ** suffix +# you actually define a group so be careful. +# +# Both required and optional subprojects should have a 'subproject.ac' +# file. The script's filename should be the abbreivated subproject name +# (assuming the subproject name is sproj then we would use 'sproj.ac') +# The MCPPBS_SUBPROJECTS macro includes the 'subproject.ac' files for +# enabled subprojects. Whitespace and newlines are allowed within the +# list. +# +# Author : Christopher Batten +# Date : September 10, 2008 + +AC_DEFUN([MCPPBS_SUBPROJECTS], +[ + + # Add command line argument to enable all optional subprojects + + AC_ARG_ENABLE(optional-subprojects, + AS_HELP_STRING([--enable-optional-subprojects], + [Enable all optional subprojects])) + + # Loop through the subprojects given in the macro argument + + m4_foreach([MCPPBS_SPROJ],[$1], + [ + + # Determine if this is a required or an optional subproject + + m4_define([MCPPBS_IS_REQ], + m4_bmatch(MCPPBS_SPROJ,[\*+],[false],[true])) + + # Determine if there is a group with the same name + + m4_define([MCPPBS_IS_GROUP], + m4_bmatch(MCPPBS_SPROJ,[\*\*],[true],[false])) + + # Create variations of the subproject name suitable for use as a CPP + # enabled define, a shell enabled variable, and a shell function + + m4_define([MCPPBS_SPROJ_NORM], + m4_normalize(m4_bpatsubsts(MCPPBS_SPROJ,[*],[]))) + + m4_define([MCPPBS_SPROJ_DEFINE], + m4_toupper(m4_bpatsubst(MCPPBS_SPROJ_NORM[]_ENABLED,[-],[_]))) + + m4_define([MCPPBS_SPROJ_FUNC], + m4_bpatsubst(_mpbp_[]MCPPBS_SPROJ_NORM[]_configure,[-],[_])) + + m4_define([MCPPBS_SPROJ_UNDERSCORES], + m4_bpatsubsts(MCPPBS_SPROJ,[-],[_])) + + m4_define([MCPPBS_SPROJ_SHVAR], + m4_bpatsubst(enable_[]MCPPBS_SPROJ_NORM[]_sproj,[-],[_])) + + # Add subproject to our running list + + subprojects="$subprojects MCPPBS_SPROJ_NORM" + + # Process the subproject appropriately. If enabled add it to the + # $enabled_subprojects running shell variable, set a + # SUBPROJECT_ENABLED C define, and include the appropriate + # 'subproject.ac'. + + m4_if(MCPPBS_IS_REQ,[true], + [ + AC_MSG_NOTICE([configuring default subproject : MCPPBS_SPROJ_NORM]) + AC_CONFIG_FILES(MCPPBS_SPROJ_NORM[].mk:MCPPBS_SPROJ_NORM[]/MCPPBS_SPROJ_NORM[].mk.in) + MCPPBS_SPROJ_SHVAR="yes" + subprojects_enabled="$subprojects_enabled MCPPBS_SPROJ_NORM" + AC_DEFINE(MCPPBS_SPROJ_DEFINE,, + [Define if subproject MCPPBS_SPROJ_NORM is enabled]) + m4_include(MCPPBS_SPROJ_NORM[]/MCPPBS_SPROJ_NORM[].ac) + ],[ + + # For optional subprojects we capture the 'subproject.ac' as a + # shell function so that in the MCPPBS_GROUP macro we can just + # call this shell function instead of reading in 'subproject.ac' + # again. + + MCPPBS_SPROJ_FUNC () + { + AC_MSG_NOTICE([configuring optional subproject : MCPPBS_SPROJ_NORM]) + AC_CONFIG_FILES(MCPPBS_SPROJ_NORM[].mk:MCPPBS_SPROJ_NORM[]/MCPPBS_SPROJ_NORM[].mk.in) + MCPPBS_SPROJ_SHVAR="yes" + subprojects_enabled="$subprojects_enabled MCPPBS_SPROJ_NORM" + AC_DEFINE(MCPPBS_SPROJ_DEFINE,, + [Define if subproject MCPPBS_SPROJ_NORM is enabled]) + m4_include(MCPPBS_SPROJ_NORM[]/MCPPBS_SPROJ_NORM[].ac) + }; + + # Optional subprojects add --enable-subproject command line + # options, _if_ the subproject name is not also a group name. + + m4_if(MCPPBS_IS_GROUP,[false], + [ + AC_ARG_ENABLE(MCPPBS_SPROJ_NORM, + AS_HELP_STRING(--enable-MCPPBS_SPROJ_NORM, + [Subproject MCPPBS_SPROJ_NORM]), + [MCPPBS_SPROJ_SHVAR="yes"],[MCPPBS_SPROJ_SHVAR="no"]) + + AS_IF([test "$MCPPBS_SPROJ_SHVAR" = "yes"], + [ + eval "MCPPBS_SPROJ_FUNC" + ],[ + AC_MSG_NOTICE([processing optional subproject : MCPPBS_SPROJ_NORM]) + ]) + + ],[ + + # If the subproject name is also a group name then we need to + # make sure that we set the shell variable for that subproject to + # no so that the group code knows we haven't run it yet. + + AC_MSG_NOTICE([processing optional subproject : MCPPBS_SPROJ_NORM]) + MCPPBS_SPROJ_SHVAR="no" + + ]) + + # Always execute the subproject configure code if we are enabling + # all subprojects. + + AS_IF([ test "$enable_optional_subprojects" = "yes" \ + && test "$MCPPBS_SPROJ_SHVAR" = "no" ], + [ + eval "MCPPBS_SPROJ_FUNC" + ]) + + ]) + + ]) + + # Output make variables + + AC_SUBST([subprojects]) + AC_SUBST([subprojects_enabled]) + +]) + +#------------------------------------------------------------------------- +# MCPPBS_GROUP( [group-name], [ sproj1, sproj2, ... ] ) +#------------------------------------------------------------------------- +# This macro creates a subproject group with the given group-name. When +# a user specifies --enable- the listed subprojects will be +# enabled. Groups can have the same name as a subproject and in that +# case whenever a user specifies --enable- the subprojects +# listed in the corresponding group will also be enabled. Groups are +# useful for specifying related subprojects which are usually enabled +# together, as well as for specifying that a specific optional +# subproject has dependencies on other optional subprojects. +# +# Author : Christopher Batten +# Date : September 10, 2008 + +AC_DEFUN([MCPPBS_GROUP], +[ + + m4_define([MCPPBS_GROUP_NORM], + m4_normalize([$1])) + + m4_define([MCPPBS_GROUP_SHVAR], + m4_bpatsubst(enable_[]MCPPBS_GROUP_NORM[]_group,[-],[_])) + + AC_ARG_ENABLE(MCPPBS_GROUP_NORM, + AS_HELP_STRING(--enable-MCPPBS_GROUP_NORM, + [Group MCPPBS_GROUP_NORM: $2]), + [MCPPBS_GROUP_SHVAR="yes"],[MCPPBS_GROUP_SHVAR="no"]) + + AS_IF([test "$MCPPBS_GROUP_SHVAR" = "yes" ], + [ + AC_MSG_NOTICE([configuring optional group : MCPPBS_GROUP_NORM]) + ]) + + m4_foreach([MCPPBS_SPROJ],[$2], + [ + + m4_define([MCPPBS_SPROJ_NORM], + m4_normalize(MCPPBS_SPROJ)) + + m4_define([MCPPBS_SPROJ_SHVAR], + m4_bpatsubst(enable_[]MCPPBS_SPROJ_NORM[]_sproj,[-],[_])) + + m4_define([MCPPBS_SPROJ_FUNC], + m4_bpatsubst(_mpbp_[]MCPPBS_SPROJ_NORM[]_configure,[-],[_])) + + AS_IF([ test "$MCPPBS_GROUP_SHVAR" = "yes" \ + && test "$MCPPBS_SPROJ_SHVAR" = "no" ], + [ + eval "MCPPBS_SPROJ_FUNC" + ]) + + ]) + +]) + +#------------------------------------------------------------------------- +# AX_DEFAULT_CONFIGURE_ARG +#------------------------------------------------------------------------- +# Simple little macro which adds a configure commane line option to an +# internal autoconf shell variable. Not sure how safe this is, but it +# seems to work fine. +# +# Author : Christopher Batten +# Date : August 20, 2009 + +AC_DEFUN([AX_DEFAULT_CONFIGURE_ARG], +[ + AC_MSG_NOTICE([adding default configure arg: $1]) + ac_configure_args="$1 ${ac_configure_args}" +]) diff --git a/riscv-pk/bbl/bbl.ac b/riscv-pk/bbl/bbl.ac new file mode 100644 index 0000000..80d3b06 --- /dev/null +++ b/riscv-pk/bbl/bbl.ac @@ -0,0 +1,12 @@ +AC_ARG_ENABLE([logo], AS_HELP_STRING([--enable-logo], [Enable boot logo])) +AS_IF([test "x$enable_logo" == "xyes"], [ + AC_DEFINE([PK_ENABLE_LOGO],,[Define if the RISC-V logo is to be displayed]) +]) + +AC_ARG_WITH([payload], AS_HELP_STRING([--with-payload], [Set ELF payload for bbl]), + [AC_SUBST([BBL_PAYLOAD], $with_payload, [Kernel payload for bbl])], + [AC_SUBST([BBL_PAYLOAD], [dummy_payload], [Kernel payload for bbl])]) + +AC_ARG_WITH([logo], AS_HELP_STRING([--with-logo], [Specify a better logo]), + [AC_SUBST([BBL_LOGO_FILE], $with_logo, [Logo for bbl])], + [AC_SUBST([BBL_LOGO_FILE], [riscv_logo.txt], [Logo for bbl])]) diff --git a/riscv-pk/bbl/bbl.c b/riscv-pk/bbl/bbl.c new file mode 100644 index 0000000..1b96a9d --- /dev/null +++ b/riscv-pk/bbl/bbl.c @@ -0,0 +1,67 @@ +#include "bbl.h" +#include "mtrap.h" +#include "atomic.h" +#include "vm.h" +#include "bits.h" +#include "config.h" +#include "fdt.h" +#include + +static const void* entry_point; +long disabled_hart_mask; + +static uintptr_t dtb_output() +{ + extern char _payload_end; + uintptr_t end = (uintptr_t) &_payload_end; + return (end + MEGAPAGE_SIZE - 1) / MEGAPAGE_SIZE * MEGAPAGE_SIZE; +} + +static void filter_dtb(uintptr_t source) +{ + uintptr_t dest = dtb_output(); + uint32_t size = fdt_size(source); + memcpy((void*)dest, (void*)source, size); + + // Remove information from the chained FDT + filter_harts(dest, &disabled_hart_mask); + filter_plic(dest); + filter_compat(dest, "riscv,clint0"); + filter_compat(dest, "riscv,debug-013"); +} + +void boot_other_hart(uintptr_t unused __attribute__((unused))) +{ + const void* entry; + do { + entry = entry_point; + mb(); + } while (!entry); + + long hartid = read_csr(mhartid); + if ((1 << hartid) & disabled_hart_mask) { + while (1) { + __asm__ volatile("wfi"); +#ifdef __riscv_div + __asm__ volatile("div x0, x0, x0"); +#endif + } + } + + enter_supervisor_mode(entry, hartid, dtb_output()); +} + +void boot_loader(uintptr_t dtb) +{ + extern char _payload_start; + filter_dtb(dtb); +#ifdef PK_ENABLE_LOGO + print_logo(); +#endif +#ifdef PK_PRINT_DEVICE_TREE + fdt_print(dtb_output()); +#endif + mb(); + entry_point = &_payload_start; + boot_other_hart(0); +} diff --git a/riscv-pk/bbl/bbl.h b/riscv-pk/bbl/bbl.h new file mode 100644 index 0000000..c9a02e1 --- /dev/null +++ b/riscv-pk/bbl/bbl.h @@ -0,0 +1,15 @@ +// See LICENSE for license details. + +#ifndef _BBL_H +#define _BBL_H + +#ifndef __ASSEMBLER__ + +#include +#include + +void print_logo(); + +#endif // !__ASSEMBLER__ + +#endif diff --git a/riscv-pk/bbl/bbl.lds b/riscv-pk/bbl/bbl.lds new file mode 100644 index 0000000..2fd0d7c --- /dev/null +++ b/riscv-pk/bbl/bbl.lds @@ -0,0 +1,111 @@ +OUTPUT_ARCH( "riscv" ) + +ENTRY( reset_vector ) + +SECTIONS +{ + + /*--------------------------------------------------------------------*/ + /* Code and read-only segment */ + /*--------------------------------------------------------------------*/ + + /* Begining of code and text segment */ + . = 0x80000000; + _ftext = .; + PROVIDE( eprol = . ); + + .text : + { + *(.text.init) + } + + /* text: Program code section */ + .text : + { + *(.text) + *(.text.*) + *(.gnu.linkonce.t.*) + } + + /* rodata: Read-only data */ + .rodata : + { + *(.rdata) + *(.rodata) + *(.rodata.*) + *(.gnu.linkonce.r.*) + } + + /* End of code and read-only segment */ + PROVIDE( etext = . ); + _etext = .; + + /*--------------------------------------------------------------------*/ + /* HTIF, isolated onto separate page */ + /*--------------------------------------------------------------------*/ + . = ALIGN(0x1000); + .htif : + { + PROVIDE( __htif_base = .); + *(.htif) + } + . = ALIGN(0x1000); + + /*--------------------------------------------------------------------*/ + /* Initialized data segment */ + /*--------------------------------------------------------------------*/ + + /* Start of initialized data segment */ + . = ALIGN(16); + _fdata = .; + + /* data: Writable data */ + .data : + { + *(.data) + *(.data.*) + *(.srodata*) + *(.gnu.linkonce.d.*) + *(.comment) + } + + /* End of initialized data segment */ + . = ALIGN(4); + PROVIDE( edata = . ); + _edata = .; + + /*--------------------------------------------------------------------*/ + /* Uninitialized data segment */ + /*--------------------------------------------------------------------*/ + + /* Start of uninitialized data segment */ + . = .; + _fbss = .; + + /* sbss: Uninitialized writeable small data section */ + . = .; + + /* bss: Uninitialized writeable data section */ + . = .; + _bss_start = .; + .bss : + { + *(.bss) + *(.bss.*) + *(.sbss*) + *(.gnu.linkonce.b.*) + *(COMMON) + } + + .sbi : + { + *(.sbi) + } + + .payload : + { + *(.payload) + } + + _end = .; +} diff --git a/riscv-pk/bbl/bbl.mk.in b/riscv-pk/bbl/bbl.mk.in new file mode 100644 index 0000000..4449f82 --- /dev/null +++ b/riscv-pk/bbl/bbl.mk.in @@ -0,0 +1,29 @@ +bbl_subproject_deps = \ + util \ + machine \ + dummy_payload \ + +bbl_hdrs = \ + bbl.h \ + +bbl_c_srcs = \ + logo.c \ + +bbl_asm_srcs = \ + payload.S \ + raw_logo.S \ + +payload.o: bbl_payload + +bbl_payload: $(BBL_PAYLOAD) + if $(READELF) -h $< 2> /dev/null > /dev/null; then $(OBJCOPY) -O binary $< $@; else cp $< $@; fi + +raw_logo.o: bbl_logo_file + +bbl_logo_file: @BBL_LOGO_FILE@ + cat $^ | sed 's/$$/\r/' > $@ + +bbl_test_srcs = + +bbl_install_prog_srcs = \ + bbl.c \ diff --git a/riscv-pk/bbl/logo.c b/riscv-pk/bbl/logo.c new file mode 100644 index 0000000..fcd43ec --- /dev/null +++ b/riscv-pk/bbl/logo.c @@ -0,0 +1,9 @@ +#include +#include "mtrap.h" + +extern const char logo[]; + +void print_logo() +{ + putstring(logo); +} diff --git a/riscv-pk/bbl/payload.S b/riscv-pk/bbl/payload.S new file mode 100644 index 0000000..6a175aa --- /dev/null +++ b/riscv-pk/bbl/payload.S @@ -0,0 +1,9 @@ +#include "encoding.h" + + .section ".payload","a",@progbits + .align RISCV_PGSHIFT + RISCV_PGLEVEL_BITS + + .globl _payload_start, _payload_end +_payload_start: + .incbin BBL_PAYLOAD +_payload_end: diff --git a/riscv-pk/bbl/raw_logo.S b/riscv-pk/bbl/raw_logo.S new file mode 100644 index 0000000..bddf8f4 --- /dev/null +++ b/riscv-pk/bbl/raw_logo.S @@ -0,0 +1,7 @@ +#include "encoding.h" + + .section .rodata + .globl logo +logo: + .incbin BBL_LOGO_FILE + .byte 0 diff --git a/riscv-pk/bbl/riscv_logo.txt b/riscv-pk/bbl/riscv_logo.txt new file mode 100644 index 0000000..1f4c9f5 --- /dev/null +++ b/riscv-pk/bbl/riscv_logo.txt @@ -0,0 +1,23 @@ + vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv + vvvvvvvvvvvvvvvvvvvvvvvvvvvv +rrrrrrrrrrrrr vvvvvvvvvvvvvvvvvvvvvvvvvv +rrrrrrrrrrrrrrrr vvvvvvvvvvvvvvvvvvvvvvvv +rrrrrrrrrrrrrrrrrr vvvvvvvvvvvvvvvvvvvvvvvv +rrrrrrrrrrrrrrrrrr vvvvvvvvvvvvvvvvvvvvvvvv +rrrrrrrrrrrrrrrrrr vvvvvvvvvvvvvvvvvvvvvvvv +rrrrrrrrrrrrrrrr vvvvvvvvvvvvvvvvvvvvvv +rrrrrrrrrrrrr vvvvvvvvvvvvvvvvvvvvvv +rr vvvvvvvvvvvvvvvvvvvvvv +rr vvvvvvvvvvvvvvvvvvvvvvvv rr +rrrr vvvvvvvvvvvvvvvvvvvvvvvvvv rrrr +rrrrrr vvvvvvvvvvvvvvvvvvvvvv rrrrrr +rrrrrrrr vvvvvvvvvvvvvvvvvv rrrrrrrr +rrrrrrrrrr vvvvvvvvvvvvvv rrrrrrrrrr +rrrrrrrrrrrr vvvvvvvvvv rrrrrrrrrrrr +rrrrrrrrrrrrrr vvvvvv rrrrrrrrrrrrrr +rrrrrrrrrrrrrrrr vv rrrrrrrrrrrrrrrr +rrrrrrrrrrrrrrrrrr rrrrrrrrrrrrrrrrrr +rrrrrrrrrrrrrrrrrrrr rrrrrrrrrrrrrrrrrrrr +rrrrrrrrrrrrrrrrrrrrrr rrrrrrrrrrrrrrrrrrrrrr + + INSTRUCTION SETS WANT TO BE FREE diff --git a/riscv-pk/config.h.in b/riscv-pk/config.h.in new file mode 100644 index 0000000..4674a2e --- /dev/null +++ b/riscv-pk/config.h.in @@ -0,0 +1,52 @@ +/* config.h.in. Generated from configure.ac by autoheader. */ + +/* Define if subproject MCPPBS_SPROJ_NORM is enabled */ +#undef BBL_ENABLED + +/* Define if subproject MCPPBS_SPROJ_NORM is enabled */ +#undef DUMMY_PAYLOAD_ENABLED + +/* Define if subproject MCPPBS_SPROJ_NORM is enabled */ +#undef MACHINE_ENABLED + +/* Define to the address where bug reports for this package should be sent. */ +#undef PACKAGE_BUGREPORT + +/* Define to the full name of this package. */ +#undef PACKAGE_NAME + +/* Define to the full name and version of this package. */ +#undef PACKAGE_STRING + +/* Define to the one symbol short name of this package. */ +#undef PACKAGE_TARNAME + +/* Define to the home page for this package. */ +#undef PACKAGE_URL + +/* Define to the version of this package. */ +#undef PACKAGE_VERSION + +/* Define if subproject MCPPBS_SPROJ_NORM is enabled */ +#undef PK_ENABLED + +/* Define if floating-point emulation is enabled */ +#undef PK_ENABLE_FP_EMULATION + +/* Define if the RISC-V logo is to be displayed */ +#undef PK_ENABLE_LOGO + +/* Define if virtual memory support is enabled */ +#undef PK_ENABLE_VM + +/* Define if the DTS is to be displayed */ +#undef PK_PRINT_DEVICE_TREE + +/* Define if subproject MCPPBS_SPROJ_NORM is enabled */ +#undef SOFTFLOAT_ENABLED + +/* Define to 1 if you have the ANSI C header files. */ +#undef STDC_HEADERS + +/* Define if subproject MCPPBS_SPROJ_NORM is enabled */ +#undef UTIL_ENABLED diff --git a/riscv-pk/configure b/riscv-pk/configure new file mode 100755 index 0000000..c3b9c2a --- /dev/null +++ b/riscv-pk/configure @@ -0,0 +1,5775 @@ +#! /bin/sh +# Guess values for system-dependent variables and create Makefiles. +# Generated by GNU Autoconf 2.69 for RISC-V Proxy Kernel ?. +# +# Report bugs to . +# +# +# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. +# +# +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi + + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +# Use a proper internal environment variable to ensure we don't fall + # into an infinite loop, continuously re-executing ourselves. + if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then + _as_can_reexec=no; export _as_can_reexec; + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +as_fn_exit 255 + fi + # We don't want this to propagate to other subprocesses. + { _as_can_reexec=; unset _as_can_reexec;} +if test "x$CONFIG_SHELL" = x; then + as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST +else + case \`(set -o) 2>/dev/null\` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi +" + as_required="as_fn_return () { (exit \$1); } +as_fn_success () { as_fn_return 0; } +as_fn_failure () { as_fn_return 1; } +as_fn_ret_success () { return 0; } +as_fn_ret_failure () { return 1; } + +exitcode=0 +as_fn_success || { exitcode=1; echo as_fn_success failed.; } +as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } +as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } +as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } +if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : + +else + exitcode=1; echo positional parameters were not saved. +fi +test x\$exitcode = x0 || exit 1 +test -x / || exit 1" + as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO + as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO + eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && + test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 +test \$(( 1 + 1 )) = 2 || exit 1" + if (eval "$as_required") 2>/dev/null; then : + as_have_required=yes +else + as_have_required=no +fi + if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : + +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +as_found=false +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + as_found=: + case $as_dir in #( + /*) + for as_base in sh bash ksh sh5; do + # Try only shells that exist, to save several forks. + as_shell=$as_dir/$as_base + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : + CONFIG_SHELL=$as_shell as_have_required=yes + if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : + break 2 +fi +fi + done;; + esac + as_found=false +done +$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : + CONFIG_SHELL=$SHELL as_have_required=yes +fi; } +IFS=$as_save_IFS + + + if test "x$CONFIG_SHELL" != x; then : + export CONFIG_SHELL + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +exit 255 +fi + + if test x$as_have_required = xno; then : + $as_echo "$0: This script requires a shell more modern than all" + $as_echo "$0: the shells that I found on your system." + if test x${ZSH_VERSION+set} = xset ; then + $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" + $as_echo "$0: be upgraded to zsh 4.3.4 or later." + else + $as_echo "$0: Please tell bug-autoconf@gnu.org and Andrew Waterman +$0: about your system, including any error possibly output +$0: before this message. Then install a modern shell, or +$0: manually run the script under such a shell if you do +$0: have one." + fi + exit 1 +fi +fi +fi +SHELL=${CONFIG_SHELL-/bin/sh} +export SHELL +# Unset more variables known to interfere with behavior of common tools. +CLICOLOR_FORCE= GREP_OPTIONS= +unset CLICOLOR_FORCE GREP_OPTIONS + +## --------------------- ## +## M4sh Shell Functions. ## +## --------------------- ## +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} # as_fn_mkdir_p + +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + + + as_lineno_1=$LINENO as_lineno_1a=$LINENO + as_lineno_2=$LINENO as_lineno_2a=$LINENO + eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && + test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { + # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | + sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno + N + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || + { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } + + # If we had to re-execute with $CONFIG_SHELL, we're ensured to have + # already done that, so ensure we don't try to do so again and fall + # in an infinite loop. This has already happened in practice. + _as_can_reexec=no; export _as_can_reexec + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" + # Exit status is that of the last command. + exit +} + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in #((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; +esac + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -pR'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -pR' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -pR' + fi +else + as_ln_s='cp -pR' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + +if mkdir -p . 2>/dev/null; then + as_mkdir_p='mkdir -p "$as_dir"' +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +as_test_x='test -x' +as_executable_p=as_fn_executable_p + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +test -n "$DJDIR" || exec 7<&0 &1 + +# Name of the host. +# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, +# so uname gets run too. +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +# +# Initializations. +# +ac_default_prefix=/usr/local +ac_clean_files= +ac_config_libobj_dir=. +LIBOBJS= +cross_compiling=no +subdirs= +MFLAGS= +MAKEFLAGS= + +# Identity of this package. +#PACKAGE_NAME='RISC-V Proxy Kernel' +#PACKAGE_TARNAME='riscv-pk' +#PACKAGE_VERSION='?' +#PACKAGE_STRING='RISC-V Proxy Kernel ?' +#PACKAGE_BUGREPORT='Andrew Waterman' +#PACKAGE_URL='' + +#ac_unique_file="pk/pk.h" +ac_subst_vars='LTLIBOBJS +LIBOBJS +subprojects_enabled +subprojects +BBL_LOGO_FILE +BBL_PAYLOAD +install_subdir +RISCV +EGREP +GREP +CPP +stow +INSTALL_DATA +INSTALL_SCRIPT +INSTALL_PROGRAM +STOW_PREFIX +STOW_ROOT +enable_stow +OBJCOPY +READELF +RANLIB +AR +ac_ct_CXX +CXXFLAGS +CXX +OBJEXT +EXEEXT +ac_ct_CC +CPPFLAGS +LDFLAGS +CFLAGS +CC +host_os +host_vendor +host_cpu +host +build_os +build_vendor +build_cpu +build +target_alias +host_alias +build_alias +LIBS +ECHO_T +ECHO_N +ECHO_C +DEFS +mandir +localedir +libdir +psdir +pdfdir +dvidir +htmldir +infodir +docdir +oldincludedir +includedir +runstatedir +localstatedir +sharedstatedir +sysconfdir +datadir +datarootdir +libexecdir +sbindir +bindir +program_transform_name +prefix +exec_prefix +PACKAGE_URL +PACKAGE_BUGREPORT +PACKAGE_STRING +PACKAGE_VERSION +PACKAGE_TARNAME +PACKAGE_NAME +PATH_SEPARATOR +SHELL' +ac_subst_files='' +ac_user_opts=' +enable_option_checking +enable_stow +enable_32bit +enable_print_device_tree +enable_optional_subprojects +enable_vm +enable_logo +with_payload +with_logo +enable_fp_emulation +' + ac_precious_vars='build_alias +host_alias +target_alias +CC +CFLAGS +LDFLAGS +LIBS +CPPFLAGS +CXX +CXXFLAGS +CCC +STOW_ROOT +STOW_PREFIX +CPP +RISCV' + + +# Initialize some variables set by options. +ac_init_help= +ac_init_version=false +ac_unrecognized_opts= +ac_unrecognized_sep= +# The variables have the same names as the options, with +# dashes changed to underlines. +cache_file=/dev/null +exec_prefix=NONE +no_create= +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +verbose= +x_includes=NONE +x_libraries=NONE + +# Installation directory options. +# These are left unexpanded so users can "make install exec_prefix=/foo" +# and all the variables that are supposed to be based on exec_prefix +# by default will actually change. +# Use braces instead of parens because sh, perl, etc. also accept them. +# (The list follows the same order as the GNU Coding Standards.) +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datarootdir='${prefix}/share' +datadir='${datarootdir}' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +runstatedir='${localstatedir}/run' +includedir='${prefix}/include' +oldincludedir='/usr/include' +docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' +infodir='${datarootdir}/info' +htmldir='${docdir}' +dvidir='${docdir}' +pdfdir='${docdir}' +psdir='${docdir}' +libdir='${exec_prefix}/lib' +localedir='${datarootdir}/locale' +mandir='${datarootdir}/man' + +ac_prev= +ac_dashdash= +for ac_option +do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval $ac_prev=\$ac_option + ac_prev= + continue + fi + + case $ac_option in + *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; + *=) ac_optarg= ;; + *) ac_optarg=yes ;; + esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case $ac_dashdash$ac_option in + --) + ac_dashdash=yes ;; + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir=$ac_optarg ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build_alias ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build_alias=$ac_optarg ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file=$ac_optarg ;; + + --config-cache | -C) + cache_file=config.cache ;; + + -datadir | --datadir | --datadi | --datad) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=*) + datadir=$ac_optarg ;; + + -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ + | --dataroo | --dataro | --datar) + ac_prev=datarootdir ;; + -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ + | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) + datarootdir=$ac_optarg ;; + + -disable-* | --disable-*) + ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=no ;; + + -docdir | --docdir | --docdi | --doc | --do) + ac_prev=docdir ;; + -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) + docdir=$ac_optarg ;; + + -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) + ac_prev=dvidir ;; + -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) + dvidir=$ac_optarg ;; + + -enable-* | --enable-*) + ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=\$ac_optarg ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix=$ac_optarg ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he | -h) + ac_init_help=long ;; + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) + ac_init_help=recursive ;; + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) + ac_init_help=short ;; + + -host | --host | --hos | --ho) + ac_prev=host_alias ;; + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; + + -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) + ac_prev=htmldir ;; + -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ + | --ht=*) + htmldir=$ac_optarg ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir=$ac_optarg ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir=$ac_optarg ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir=$ac_optarg ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + + -localedir | --localedir | --localedi | --localed | --locale) + ac_prev=localedir ;; + -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) + localedir=$ac_optarg ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst | --locals) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) + localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir=$ac_optarg ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c | -n) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir=$ac_optarg ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix=$ac_optarg ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix=$ac_optarg ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix=$ac_optarg ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + + -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) + ac_prev=pdfdir ;; + -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) + pdfdir=$ac_optarg ;; + + -psdir | --psdir | --psdi | --psd | --ps) + ac_prev=psdir ;; + -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) + psdir=$ac_optarg ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -runstatedir | --runstatedir | --runstatedi | --runstated \ + | --runstate | --runstat | --runsta | --runst | --runs \ + | --run | --ru | --r) + ac_prev=runstatedir ;; + -runstatedir=* | --runstatedir=* | --runstatedi=* | --runstated=* \ + | --runstate=* | --runstat=* | --runsta=* | --runst=* | --runs=* \ + | --run=* | --ru=* | --r=*) + runstatedir=$ac_optarg ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir=$ac_optarg ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir=$ac_optarg ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site=$ac_optarg ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir=$ac_optarg ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir=$ac_optarg ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target_alias ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target_alias=$ac_optarg ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers | -V) + ac_init_version=: ;; + + -with-* | --with-*) + ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=\$ac_optarg ;; + + -without-* | --without-*) + ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=no ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes=$ac_optarg ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + + -*) as_fn_error $? "unrecognized option: \`$ac_option' +Try \`$0 --help' for more information" + ;; + + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + case $ac_envvar in #( + '' | [0-9]* | *[!_$as_cr_alnum]* ) + as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; + esac + eval $ac_envvar=\$ac_optarg + export $ac_envvar ;; + + *) + # FIXME: should be removed in autoconf 3.0. + $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" + ;; + + esac +done + +if test -n "$ac_prev"; then + ac_option=--`echo $ac_prev | sed 's/_/-/g'` + as_fn_error $? "missing argument to $ac_option" +fi + +if test -n "$ac_unrecognized_opts"; then + case $enable_option_checking in + no) ;; + fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; + *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; + esac +fi + +# Check all directory arguments for consistency. +for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ + datadir sysconfdir sharedstatedir localstatedir includedir \ + oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ + libdir localedir mandir runstatedir +do + eval ac_val=\$$ac_var + # Remove trailing slashes. + case $ac_val in + */ ) + ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` + eval $ac_var=\$ac_val;; + esac + # Be sure to have absolute directory names. + case $ac_val in + [\\/$]* | ?:[\\/]* ) continue;; + NONE | '' ) case $ac_var in *prefix ) continue;; esac;; + esac + as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" +done + +# There might be people who depend on the old broken behavior: `$host' +# used to hold the argument of --host etc. +# FIXME: To remove some day. +build=$build_alias +host=$host_alias +target=$target_alias + +# FIXME: To remove some day. +if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +fi + +ac_tool_prefix= +test -n "$host_alias" && ac_tool_prefix=$host_alias- + +test "$silent" = yes && exec 6>/dev/null + + +ac_pwd=`pwd` && test -n "$ac_pwd" && +ac_ls_di=`ls -di .` && +ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || + as_fn_error $? "working directory cannot be determined" +test "X$ac_ls_di" = "X$ac_pwd_ls_di" || + as_fn_error $? "pwd does not report name of working directory" + + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then the parent directory. + ac_confdir=`$as_dirname -- "$as_myself" || +$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_myself" : 'X\(//\)[^/]' \| \ + X"$as_myself" : 'X\(//\)$' \| \ + X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_myself" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + srcdir=$ac_confdir + if test ! -r "$srcdir/$ac_unique_file"; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r "$srcdir/$ac_unique_file"; then + test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." + as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" +fi +ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" +ac_abs_confdir=`( + cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" + pwd)` +# When building in place, set srcdir=. +if test "$ac_abs_confdir" = "$ac_pwd"; then + srcdir=. +fi +# Remove unnecessary trailing slashes from srcdir. +# Double slashes in file names in object file debugging info +# mess up M-x gdb in Emacs. +case $srcdir in +*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; +esac +for ac_var in $ac_precious_vars; do + eval ac_env_${ac_var}_set=\${${ac_var}+set} + eval ac_env_${ac_var}_value=\$${ac_var} + eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} + eval ac_cv_env_${ac_var}_value=\$${ac_var} +done + +# +# Report the --help message. +# +if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +\`configure' configures RISC-V Proxy Kernel ? to adapt to many kinds of systems. + +Usage: $0 [OPTION]... [VAR=VALUE]... + +To assign environment variables (e.g., CC, CFLAGS...), specify them as +VAR=VALUE. See below for descriptions of some of the useful variables. + +Defaults for the options are specified in brackets. + +Configuration: + -h, --help display this help and exit + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit + -q, --quiet, --silent do not print \`checking ...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [PREFIX] + +By default, \`make install' will install all the files in +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +an installation prefix other than \`$ac_default_prefix' using \`--prefix', +for instance \`--prefix=\$HOME'. + +For better control, use the options below. + +Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --runstatedir=DIR modifiable per-process data [LOCALSTATEDIR/run] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] + --datadir=DIR read-only architecture-independent data [DATAROOTDIR] + --infodir=DIR info documentation [DATAROOTDIR/info] + --localedir=DIR locale-dependent data [DATAROOTDIR/locale] + --mandir=DIR man documentation [DATAROOTDIR/man] + --docdir=DIR documentation root [DATAROOTDIR/doc/riscv-pk] + --htmldir=DIR html documentation [DOCDIR] + --dvidir=DIR dvi documentation [DOCDIR] + --pdfdir=DIR pdf documentation [DOCDIR] + --psdir=DIR ps documentation [DOCDIR] +_ACEOF + + cat <<\_ACEOF + +System types: + --build=BUILD configure for building on BUILD [guessed] + --host=HOST cross-compile to build programs to run on HOST [BUILD] +_ACEOF +fi + +if test -n "$ac_init_help"; then + case $ac_init_help in + short | recursive ) echo "Configuration of RISC-V Proxy Kernel ?:";; + esac + cat <<\_ACEOF + +Optional Features: + --disable-option-checking ignore unrecognized --enable/--with options + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --enable-stow Enable stow-based install + --enable-32bit Build a 32-bit pk + --enable-print-device-tree + Print DTS when booting + --enable-optional-subprojects + Enable all optional subprojects + --disable-vm Disable virtual memory + --enable-logo Enable boot logo + --disable-fp-emulation Disable floating-point emulation + +Optional Packages: + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --with-payload Set ELF payload for bbl + --with-logo Specify a better logo + +Some influential environment variables: + CC C compiler command + CFLAGS C compiler flags + LDFLAGS linker flags, e.g. -L if you have libraries in a + nonstandard directory + LIBS libraries to pass to the linker, e.g. -l + CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if + you have headers in a nonstandard directory + CXX C++ compiler command + CXXFLAGS C++ compiler flags + STOW_ROOT Root for non-native stow-based installs + STOW_PREFIX Prefix for stow-based installs + CPP C preprocessor + RISCV top-level RISC-V install directory + +Use these variables to override the choices made by `configure' or to help +it to find libraries and programs with nonstandard names/locations. + +Report bugs to . +_ACEOF +ac_status=$? +fi + +if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d "$ac_dir" || + { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || + continue + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + cd "$ac_dir" || { ac_status=$?; continue; } + # Check for guested configure. + if test -f "$ac_srcdir/configure.gnu"; then + echo && + $SHELL "$ac_srcdir/configure.gnu" --help=recursive + elif test -f "$ac_srcdir/configure"; then + echo && + $SHELL "$ac_srcdir/configure" --help=recursive + else + $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi || ac_status=$? + cd "$ac_pwd" || { ac_status=$?; break; } + done +fi + +test -n "$ac_init_help" && exit $ac_status +if $ac_init_version; then + cat <<\_ACEOF +RISC-V Proxy Kernel configure ? +generated by GNU Autoconf 2.69 + +Copyright (C) 2012 Free Software Foundation, Inc. +This configure script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it. +_ACEOF + exit +fi + +## ------------------------ ## +## Autoconf initialization. ## +## ------------------------ ## + +# ac_fn_c_try_compile LINENO +# -------------------------- +# Try to compile conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext + if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_compile + +# ac_fn_cxx_try_compile LINENO +# ---------------------------- +# Try to compile conftest.$ac_ext, and return whether this succeeded. +ac_fn_cxx_try_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext + if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_cxx_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_cxx_try_compile + +# ac_fn_c_try_cpp LINENO +# ---------------------- +# Try to preprocess conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_cpp () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } > conftest.i && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_cpp + +# ac_fn_c_try_run LINENO +# ---------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes +# that executables *can* be run. +ac_fn_c_try_run () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then : + ac_retval=0 +else + $as_echo "$as_me: program exited with status $ac_status" >&5 + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=$ac_status +fi + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_run +cat >config.log <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by RISC-V Proxy Kernel $as_me ?, which was +generated by GNU Autoconf 2.69. Invocation command line was + + $ $0 $@ + +_ACEOF +exec 5>>config.log +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + $as_echo "PATH: $as_dir" + done +IFS=$as_save_IFS + +} >&5 + +cat >&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## + +_ACEOF + + +# Keep a trace of the command line. +# Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. +# Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. +ac_configure_args= +ac_configure_args0= +ac_configure_args1= +ac_must_keep_next=false +for ac_pass in 1 2 +do + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *\'*) + ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; + 2) + as_fn_append ac_configure_args1 " '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + as_fn_append ac_configure_args " '$ac_arg'" + ;; + esac + done +done +{ ac_configure_args0=; unset ac_configure_args0;} +{ ac_configure_args1=; unset ac_configure_args1;} + +# When interrupted or exit'd, cleanup temporary files, and complete +# config.log. We remove comments because anyway the quotes in there +# would cause problems or look ugly. +# WARNING: Use '\'' to represent an apostrophe within the trap. +# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. +trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { + echo + + $as_echo "## ---------------- ## +## Cache variables. ## +## ---------------- ##" + echo + # The following way of writing the cache mishandles newlines in values, +( + for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done + (set) 2>&1 | + case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + sed -n \ + "s/'\''/'\''\\\\'\'''\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" + ;; #( + *) + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) + echo + + $as_echo "## ----------------- ## +## Output variables. ## +## ----------------- ##" + echo + for ac_var in $ac_subst_vars + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + + if test -n "$ac_subst_files"; then + $as_echo "## ------------------- ## +## File substitutions. ## +## ------------------- ##" + echo + for ac_var in $ac_subst_files + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + fi + + if test -s confdefs.h; then + $as_echo "## ----------- ## +## confdefs.h. ## +## ----------- ##" + echo + cat confdefs.h + echo + fi + test "$ac_signal" != 0 && + $as_echo "$as_me: caught signal $ac_signal" + $as_echo "$as_me: exit $exit_status" + } >&5 + rm -f core *.core core.conftest.* && + rm -f -r conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status +' 0 +for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal +done +ac_signal=0 + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -f -r conftest* confdefs.h + +$as_echo "/* confdefs.h */" > confdefs.h + +# Predefined preprocessor variables. + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_NAME "$PACKAGE_NAME" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_TARNAME "$PACKAGE_TARNAME" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_VERSION "$PACKAGE_VERSION" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_STRING "$PACKAGE_STRING" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_URL "$PACKAGE_URL" +_ACEOF + + +# Let the site file select an alternate cache file if it wants to. +# Prefer an explicitly selected file to automatically selected ones. +ac_site_file1=NONE +ac_site_file2=NONE +if test -n "$CONFIG_SITE"; then + # We do not want a PATH search for config.site. + case $CONFIG_SITE in #(( + -*) ac_site_file1=./$CONFIG_SITE;; + */*) ac_site_file1=$CONFIG_SITE;; + *) ac_site_file1=./$CONFIG_SITE;; + esac +elif test "x$prefix" != xNONE; then + ac_site_file1=$prefix/share/config.site + ac_site_file2=$prefix/etc/config.site +else + ac_site_file1=$ac_default_prefix/share/config.site + ac_site_file2=$ac_default_prefix/etc/config.site +fi +for ac_site_file in "$ac_site_file1" "$ac_site_file2" +do + test "x$ac_site_file" = xNONE && continue + if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 +$as_echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" \ + || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "failed to load site script $ac_site_file +See \`config.log' for more details" "$LINENO" 5; } + fi +done + +if test -r "$cache_file"; then + # Some versions of bash will fail to source /dev/null (special files + # actually), so we avoid doing that. DJGPP emulates it as a regular file. + if test /dev/null != "$cache_file" && test -f "$cache_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 +$as_echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . "$cache_file";; + *) . "./$cache_file";; + esac + fi +else + { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 +$as_echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file +fi + +# Check that the precious variables saved in the cache have kept the same +# value. +ac_cache_corrupted=false +for ac_var in $ac_precious_vars; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set + eval ac_old_val=\$ac_cv_env_${ac_var}_value + eval ac_new_val=\$ac_env_${ac_var}_value + case $ac_old_set,$ac_new_set in + set,) + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then + # differences in whitespace do not lead to failure. + ac_old_val_w=`echo x $ac_old_val` + ac_new_val_w=`echo x $ac_new_val` + if test "$ac_old_val_w" != "$ac_new_val_w"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 +$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + ac_cache_corrupted=: + else + { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 +$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} + eval $ac_var=\$ac_old_val + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 +$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 +$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) as_fn_append ac_configure_args " '$ac_arg'" ;; + esac + fi +done +if $ac_cache_corrupted; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 +$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} + as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 +fi +## -------------------- ## +## Main body of script. ## +## -------------------- ## + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + +ac_aux_dir= +for ac_dir in scripts "$srcdir"/scripts; do + if test -f "$ac_dir/install-sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f "$ac_dir/install.sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + elif test -f "$ac_dir/shtool"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi +done +if test -z "$ac_aux_dir"; then + as_fn_error $? "cannot find install-sh, install.sh, or shtool in scripts \"$srcdir\"/scripts" "$LINENO" 5 +fi + +# These three variables are undocumented and unsupported, +# and are intended to be withdrawn in a future Autoconf release. +# They can cause serious problems if a builder's source tree is in a directory +# whose full name contains unusual characters. +ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. +ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. +ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. + + +# Make sure we can run config.sub. +$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || + as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 +$as_echo_n "checking build system type... " >&6; } +if ${ac_cv_build+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_build_alias=$build_alias +test "x$ac_build_alias" = x && + ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` +test "x$ac_build_alias" = x && + as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 +ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 +$as_echo "$ac_cv_build" >&6; } +case $ac_cv_build in +*-*-*) ;; +*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; +esac +build=$ac_cv_build +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_build +shift +build_cpu=$1 +build_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +build_os=$* +IFS=$ac_save_IFS +case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 +$as_echo_n "checking host system type... " >&6; } +if ${ac_cv_host+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test "x$host_alias" = x; then + ac_cv_host=$ac_cv_build +else + ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 +$as_echo "$ac_cv_host" >&6; } +case $ac_cv_host in +*-*-*) ;; +*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; +esac +host=$ac_cv_host +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_host +shift +host_cpu=$1 +host_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +host_os=$* +IFS=$ac_save_IFS +case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac + + + +#------------------------------------------------------------------------- +# Checks for programs +#------------------------------------------------------------------------- + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +else + CC="$ac_cv_prog_CC" +fi + +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. +set dummy ${ac_tool_prefix}cc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + fi +fi +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + ac_prog_rejected=no +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + fi +fi +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + for ac_prog in cl.exe + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$CC" && break + done +fi +if test -z "$CC"; then + ac_ct_CC=$CC + for ac_prog in cl.exe +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_CC" && break +done + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +fi + +fi + + +test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "no acceptable C compiler found in \$PATH +See \`config.log' for more details" "$LINENO" 5; } + +# Provide some information about the compiler. +$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 +set X $ac_compile +ac_compiler=$2 +for ac_option in --version -v -V -qversion; do + { { ac_try="$ac_compiler $ac_option >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compiler $ac_option >&5") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + sed '10a\ +... rest of stderr output deleted ... + 10q' conftest.err >conftest.er1 + cat conftest.er1 >&5 + fi + rm -f conftest.er1 conftest.err + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } +done + +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" +# Try to create an executable without -o first, disregard a.out. +# It will help us diagnose broken compilers, and finding out an intuition +# of exeext. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 +$as_echo_n "checking whether the C compiler works... " >&6; } +ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` + +# The possible output files: +ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" + +ac_rmfiles= +for ac_file in $ac_files +do + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + * ) ac_rmfiles="$ac_rmfiles $ac_file";; + esac +done +rm -f $ac_rmfiles + +if { { ac_try="$ac_link_default" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link_default") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. +# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' +# in a Makefile. We should not override ac_cv_exeext if it was cached, +# so that the user can short-circuit this test for compilers unknown to +# Autoconf. +for ac_file in $ac_files '' +do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) + if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; + then :; else + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + fi + # We set ac_cv_exeext here because the later test for it is not + # safe: cross compilers may not add the suffix if given an `-o' + # argument, so we may need to know it at that point already. + # Even if this section looks crufty: it has the advantage of + # actually working. + break;; + * ) + break;; + esac +done +test "$ac_cv_exeext" = no && ac_cv_exeext= + +else + ac_file='' +fi +if test -z "$ac_file"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +$as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "C compiler cannot create executables +See \`config.log' for more details" "$LINENO" 5; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 +$as_echo_n "checking for C compiler default output file name... " >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 +$as_echo "$ac_file" >&6; } +ac_exeext=$ac_cv_exeext + +rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 +$as_echo_n "checking for suffix of executables... " >&6; } +if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + # If both `conftest.exe' and `conftest' are `present' (well, observable) +# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will +# work properly (i.e., refer to `conftest.exe'), while it won't with +# `rm'. +for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + break;; + * ) break;; + esac +done +else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details" "$LINENO" 5; } +fi +rm -f conftest conftest$ac_cv_exeext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 +$as_echo "$ac_cv_exeext" >&6; } + +rm -f conftest.$ac_ext +EXEEXT=$ac_cv_exeext +ac_exeext=$EXEEXT +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main () +{ +FILE *f = fopen ("conftest.out", "w"); + return ferror (f) || fclose (f) != 0; + + ; + return 0; +} +_ACEOF +ac_clean_files="$ac_clean_files conftest.out" +# Check that the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 +$as_echo_n "checking whether we are cross compiling... " >&6; } +if test "$cross_compiling" != yes; then + { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if { ac_try='./conftest$ac_cv_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details" "$LINENO" 5; } + fi + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 +$as_echo "$cross_compiling" >&6; } + +rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 +$as_echo_n "checking for suffix of object files... " >&6; } +if ${ac_cv_objext+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.o conftest.obj +if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + for ac_file in conftest.o conftest.obj conftest.*; do + test -f "$ac_file" || continue; + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac +done +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of object files: cannot compile +See \`config.log' for more details" "$LINENO" 5; } +fi +rm -f conftest.$ac_cv_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 +$as_echo "$ac_cv_objext" >&6; } +OBJEXT=$ac_cv_objext +ac_objext=$OBJEXT +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 +$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } +if ${ac_cv_c_compiler_gnu+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ +#ifndef __GNUC__ + choke me +#endif + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_compiler_gnu=yes +else + ac_compiler_gnu=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_c_compiler_gnu=$ac_compiler_gnu + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 +$as_echo "$ac_cv_c_compiler_gnu" >&6; } +if test $ac_compiler_gnu = yes; then + GCC=yes +else + GCC= +fi +ac_test_CFLAGS=${CFLAGS+set} +ac_save_CFLAGS=$CFLAGS +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 +$as_echo_n "checking whether $CC accepts -g... " >&6; } +if ${ac_cv_prog_cc_g+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_save_c_werror_flag=$ac_c_werror_flag + ac_c_werror_flag=yes + ac_cv_prog_cc_g=no + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +else + CFLAGS="" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + +else + ac_c_werror_flag=$ac_save_c_werror_flag + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_c_werror_flag=$ac_save_c_werror_flag +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 +$as_echo "$ac_cv_prog_cc_g" >&6; } +if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 +$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } +if ${ac_cv_prog_cc_c89+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_cv_prog_cc_c89=no +ac_save_CC=$CC +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +struct stat; +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} + +/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated + as 'x'. The following induces an error, until -std is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something + that's true only with -std. */ +int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + +/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters + inside strings and character constants. */ +#define FOO(x) 'x' +int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; + +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} +_ACEOF +for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ + -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_c89=$ac_arg +fi +rm -f core conftest.err conftest.$ac_objext + test "x$ac_cv_prog_cc_c89" != "xno" && break +done +rm -f conftest.$ac_ext +CC=$ac_save_CC + +fi +# AC_CACHE_VAL +case "x$ac_cv_prog_cc_c89" in + x) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 +$as_echo "none needed" >&6; } ;; + xno) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 +$as_echo "unsupported" >&6; } ;; + *) + CC="$CC $ac_cv_prog_cc_c89" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 +$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; +esac +if test "x$ac_cv_prog_cc_c89" != xno; then : + +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +ac_ext=cpp +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +if test -z "$CXX"; then + if test -n "$CCC"; then + CXX=$CCC + else + if test -n "$ac_tool_prefix"; then + for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CXX+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CXX"; then + ac_cv_prog_CXX="$CXX" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CXX="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CXX=$ac_cv_prog_CXX +if test -n "$CXX"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXX" >&5 +$as_echo "$CXX" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$CXX" && break + done +fi +if test -z "$CXX"; then + ac_ct_CXX=$CXX + for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CXX+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CXX"; then + ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CXX="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_CXX=$ac_cv_prog_ac_ct_CXX +if test -n "$ac_ct_CXX"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CXX" >&5 +$as_echo "$ac_ct_CXX" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_CXX" && break +done + + if test "x$ac_ct_CXX" = x; then + CXX="g++" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CXX=$ac_ct_CXX + fi +fi + + fi +fi +# Provide some information about the compiler. +$as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler version" >&5 +set X $ac_compile +ac_compiler=$2 +for ac_option in --version -v -V -qversion; do + { { ac_try="$ac_compiler $ac_option >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compiler $ac_option >&5") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + sed '10a\ +... rest of stderr output deleted ... + 10q' conftest.err >conftest.er1 + cat conftest.er1 >&5 + fi + rm -f conftest.er1 conftest.err + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } +done + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C++ compiler" >&5 +$as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; } +if ${ac_cv_cxx_compiler_gnu+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ +#ifndef __GNUC__ + choke me +#endif + + ; + return 0; +} +_ACEOF +if ac_fn_cxx_try_compile "$LINENO"; then : + ac_compiler_gnu=yes +else + ac_compiler_gnu=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_cxx_compiler_gnu=$ac_compiler_gnu + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_cxx_compiler_gnu" >&5 +$as_echo "$ac_cv_cxx_compiler_gnu" >&6; } +if test $ac_compiler_gnu = yes; then + GXX=yes +else + GXX= +fi +ac_test_CXXFLAGS=${CXXFLAGS+set} +ac_save_CXXFLAGS=$CXXFLAGS +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -g" >&5 +$as_echo_n "checking whether $CXX accepts -g... " >&6; } +if ${ac_cv_prog_cxx_g+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_save_cxx_werror_flag=$ac_cxx_werror_flag + ac_cxx_werror_flag=yes + ac_cv_prog_cxx_g=no + CXXFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_cxx_try_compile "$LINENO"; then : + ac_cv_prog_cxx_g=yes +else + CXXFLAGS="" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_cxx_try_compile "$LINENO"; then : + +else + ac_cxx_werror_flag=$ac_save_cxx_werror_flag + CXXFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_cxx_try_compile "$LINENO"; then : + ac_cv_prog_cxx_g=yes +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_cxx_werror_flag=$ac_save_cxx_werror_flag +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cxx_g" >&5 +$as_echo "$ac_cv_prog_cxx_g" >&6; } +if test "$ac_test_CXXFLAGS" = set; then + CXXFLAGS=$ac_save_CXXFLAGS +elif test $ac_cv_prog_cxx_g = yes; then + if test "$GXX" = yes; then + CXXFLAGS="-g -O2" + else + CXXFLAGS="-g" + fi +else + if test "$GXX" = yes; then + CXXFLAGS="-O2" + else + CXXFLAGS= + fi +fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. +set dummy ${ac_tool_prefix}ar; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AR+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AR"; then + ac_cv_prog_AR="$AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AR="${ac_tool_prefix}ar" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +AR=$ac_cv_prog_AR +if test -n "$AR"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 +$as_echo "$AR" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_AR"; then + ac_ct_AR=$AR + # Extract the first word of "ar", so it can be a program name with args. +set dummy ar; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_AR+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_AR"; then + ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_AR="ar" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_AR=$ac_cv_prog_ac_ct_AR +if test -n "$ac_ct_AR"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 +$as_echo "$ac_ct_AR" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_AR" = x; then + AR="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + AR=$ac_ct_AR + fi +else + AR="$ac_cv_prog_AR" +fi + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_RANLIB+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +RANLIB=$ac_cv_prog_RANLIB +if test -n "$RANLIB"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 +$as_echo "$RANLIB" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_RANLIB"; then + ac_ct_RANLIB=$RANLIB + # Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_RANLIB+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_RANLIB"; then + ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_RANLIB="ranlib" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB +if test -n "$ac_ct_RANLIB"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 +$as_echo "$ac_ct_RANLIB" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_RANLIB" = x; then + RANLIB="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + RANLIB=$ac_ct_RANLIB + fi +else + RANLIB="$ac_cv_prog_RANLIB" +fi + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}readelf", so it can be a program name with args. +set dummy ${ac_tool_prefix}readelf; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_READELF+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$READELF"; then + ac_cv_prog_READELF="$READELF" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_READELF="${ac_tool_prefix}readelf" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +READELF=$ac_cv_prog_READELF +if test -n "$READELF"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $READELF" >&5 +$as_echo "$READELF" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_READELF"; then + ac_ct_READELF=$READELF + # Extract the first word of "readelf", so it can be a program name with args. +set dummy readelf; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_READELF+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_READELF"; then + ac_cv_prog_ac_ct_READELF="$ac_ct_READELF" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_READELF="readelf" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_READELF=$ac_cv_prog_ac_ct_READELF +if test -n "$ac_ct_READELF"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_READELF" >&5 +$as_echo "$ac_ct_READELF" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_READELF" = x; then + READELF="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + READELF=$ac_ct_READELF + fi +else + READELF="$ac_cv_prog_READELF" +fi + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}objcopy", so it can be a program name with args. +set dummy ${ac_tool_prefix}objcopy; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_OBJCOPY+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$OBJCOPY"; then + ac_cv_prog_OBJCOPY="$OBJCOPY" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_OBJCOPY="${ac_tool_prefix}objcopy" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +OBJCOPY=$ac_cv_prog_OBJCOPY +if test -n "$OBJCOPY"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJCOPY" >&5 +$as_echo "$OBJCOPY" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OBJCOPY"; then + ac_ct_OBJCOPY=$OBJCOPY + # Extract the first word of "objcopy", so it can be a program name with args. +set dummy objcopy; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_OBJCOPY+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OBJCOPY"; then + ac_cv_prog_ac_ct_OBJCOPY="$ac_ct_OBJCOPY" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OBJCOPY="objcopy" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_OBJCOPY=$ac_cv_prog_ac_ct_OBJCOPY +if test -n "$ac_ct_OBJCOPY"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJCOPY" >&5 +$as_echo "$ac_ct_OBJCOPY" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_OBJCOPY" = x; then + OBJCOPY="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OBJCOPY=$ac_ct_OBJCOPY + fi +else + OBJCOPY="$ac_cv_prog_OBJCOPY" +fi + + +#------------------------------------------------------------------------- +# MCPPBS specific program checks +#------------------------------------------------------------------------- +# These macros check to see if we can do a stow-based install and also +# check for an isa simulator suitable for running the unit test programs +# via the makefile. + +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AmigaOS /C/install, which installs bootblocks on floppy discs +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# OS/2's system install, which has a completely different semantic +# ./install, which can be erroneously created by make from ./install.sh. +# Reject install programs that cannot install multiple files. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 +$as_echo_n "checking for a BSD-compatible install... " >&6; } +if test -z "$INSTALL"; then +if ${ac_cv_path_install+:} false; then : + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in #(( + ./ | .// | /[cC]/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ + /usr/ucb/* ) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + elif test $ac_prog = install && + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # program-specific install script used by HP pwplus--don't use. + : + else + rm -rf conftest.one conftest.two conftest.dir + echo one > conftest.one + echo two > conftest.two + mkdir conftest.dir + if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && + test -s conftest.one && test -s conftest.two && + test -s conftest.dir/conftest.one && + test -s conftest.dir/conftest.two + then + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi + fi + fi + done + done + ;; +esac + + done +IFS=$as_save_IFS + +rm -rf conftest.one conftest.two conftest.dir + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else + # As a last resort, use the slow shell script. Don't cache a + # value for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + INSTALL=$ac_install_sh + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 +$as_echo "$INSTALL" >&6; } + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + + + + # Configure command line option + + # Check whether --enable-stow was given. +if test "${enable_stow+set}" = set; then : + enableval=$enable_stow; enable_stow="yes" +else + enable_stow="no" +fi + + + + + # Environment variables + + + + + # Check for install script + + + + # Deterimine if native build and set prefix appropriately + + if test ${enable_stow} = "yes" ; then : + + for ac_prog in stow +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_stow+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$stow"; then + ac_cv_prog_stow="$stow" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_stow="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +stow=$ac_cv_prog_stow +if test -n "$stow"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $stow" >&5 +$as_echo "$stow" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$stow" && break +done +test -n "$stow" || stow="no" + + if test ${stow} = "no" ; then : + + as_fn_error $? "Cannot use --enable-stow since stow is not available" "$LINENO" 5 + +fi + + # Check if native or non-native build + + if test "${build}" = "${host}" ; then : + + + # build == host so this is a native build. Make sure --prefix not + # set and $STOW_PREFIX is set, then set prefix=$STOW_PREFIX. + + if test "${prefix}" = "NONE" && test -n "${STOW_PREFIX}" ; then : + + prefix="${STOW_PREFIX}" + { $as_echo "$as_me:${as_lineno-$LINENO}: Using \$STOW_PREFIX from environment" >&5 +$as_echo "$as_me: Using \$STOW_PREFIX from environment" >&6;} + { $as_echo "$as_me:${as_lineno-$LINENO}: prefix=${prefix}" >&5 +$as_echo "$as_me: prefix=${prefix}" >&6;} + +fi + + +else + + + # build != host so this is a non-native build. Make sure --prefix + # not set and $STOW_ROOT is set, then set + # prefix=$STOW_ROOT/${host_alias}. + + if test "${prefix}" = "NONE" && test -n "${STOW_ROOT}" ; then : + + prefix="${STOW_ROOT}/${host_alias}" + { $as_echo "$as_me:${as_lineno-$LINENO}: Using \$STOW_ROOT from environment" >&5 +$as_echo "$as_me: Using \$STOW_ROOT from environment" >&6;} + { $as_echo "$as_me:${as_lineno-$LINENO}: prefix=${prefix}" >&5 +$as_echo "$as_me: prefix=${prefix}" >&6;} + +fi + + +fi + + +fi + + + +#------------------------------------------------------------------------- +# Checks for header files +#------------------------------------------------------------------------- + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 +$as_echo_n "checking how to run the C preprocessor... " >&6; } +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= +fi +if test -z "$CPP"; then + if ${ac_cv_prog_CPP+:} false; then : + $as_echo_n "(cached) " >&6 +else + # Double quotes because CPP needs to be expanded + for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" + do + ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + +else + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.i conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue +else + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.i conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : + break +fi + + done + ac_cv_prog_CPP=$CPP + +fi + CPP=$ac_cv_prog_CPP +else + ac_cv_prog_CPP=$CPP +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 +$as_echo "$CPP" >&6; } +ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + +else + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.i conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue +else + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.i conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : + +else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details" "$LINENO" 5; } +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 +$as_echo_n "checking for grep that handles long lines and -e... " >&6; } +if ${ac_cv_path_GREP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$GREP"; then + ac_path_GREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in grep ggrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_GREP" || continue +# Check for GNU ac_path_GREP and select it if it is found. + # Check for GNU $ac_path_GREP +case `"$ac_path_GREP" --version 2>&1` in +*GNU*) + ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'GREP' >> "conftest.nl" + "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_GREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_GREP="$ac_path_GREP" + ac_path_GREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_GREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_GREP"; then + as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_GREP=$GREP +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 +$as_echo "$ac_cv_path_GREP" >&6; } + GREP="$ac_cv_path_GREP" + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 +$as_echo_n "checking for egrep... " >&6; } +if ${ac_cv_path_EGREP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 + then ac_cv_path_EGREP="$GREP -E" + else + if test -z "$EGREP"; then + ac_path_EGREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in egrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_EGREP" || continue +# Check for GNU ac_path_EGREP and select it if it is found. + # Check for GNU $ac_path_EGREP +case `"$ac_path_EGREP" --version 2>&1` in +*GNU*) + ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'EGREP' >> "conftest.nl" + "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_EGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_EGREP="$ac_path_EGREP" + ac_path_EGREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_EGREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_EGREP"; then + as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_EGREP=$EGREP +fi + + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 +$as_echo "$ac_cv_path_EGREP" >&6; } + EGREP="$ac_cv_path_EGREP" + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 +$as_echo_n "checking for ANSI C header files... " >&6; } +if ${ac_cv_header_stdc+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#include +#include + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_header_stdc=yes +else + ac_cv_header_stdc=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then : + +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then : + +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then : + : +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif + +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int +main () +{ + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + return 2; + return 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + +else + ac_cv_header_stdc=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 +$as_echo "$ac_cv_header_stdc" >&6; } +if test $ac_cv_header_stdc = yes; then + +$as_echo "#define STDC_HEADERS 1" >>confdefs.h + +fi + + +#------------------------------------------------------------------------- +# Register RISCV environment variable +#------------------------------------------------------------------------- + + + +#------------------------------------------------------------------------- +# Set compiler flags +#------------------------------------------------------------------------- + +default_CFLAGS="-Wall -Werror -D__NO_INLINE__ -mcmodel=medany -O2 -std=gnu99 -Wno-unused -Wno-attributes -fno-delete-null-pointer-checks" + +# Check whether --enable-32bit was given. +if test "${enable_32bit+set}" = set; then : + enableval=$enable_32bit; BUILD_32BIT=$enableval +else + BUILD_32BIT=no +fi + + +case "${BUILD_32BIT}" in + yes|default) + echo "Building 32-bit pk" + CFLAGS="$default_CFLAGS -m32" + LDFLAGS="-m32" + install_subdir="riscv32-unknown-elf" + ;; + *) + CFLAGS="$default_CFLAGS" + LDFLAGS= + install_subdir="riscv64-unknown-elf" + ;; +esac + +# Check whether --enable-print-device-tree was given. +if test "${enable_print_device_tree+set}" = set; then : + enableval=$enable_print_device_tree; +fi + +if test "x$enable_print_device_tree" == "xyes"; then : + + +$as_echo "#define PK_PRINT_DEVICE_TREE /**/" >>confdefs.h + + +fi + + + +LIBS="-lgcc" + + + +#------------------------------------------------------------------------- +# MCPPBS subproject list +#------------------------------------------------------------------------- +# Order list so that subprojects only depend on those listed earlier. +# The '*' suffix indicates an optional subproject. The '**' suffix +# indicates an optional subproject which is also the name of a group. + + + + # Add command line argument to enable all optional subprojects + + # Check whether --enable-optional-subprojects was given. +if test "${enable_optional_subprojects+set}" = set; then : + enableval=$enable_optional_subprojects; +fi + + + # Loop through the subprojects given in the macro argument + + + + # Determine if this is a required or an optional subproject + + + + # Determine if there is a group with the same name + + + + # Create variations of the subproject name suitable for use as a CPP + # enabled define, a shell enabled variable, and a shell function + + + + + + + + + + + + # Add subproject to our running list + +# subprojects="$subprojects pk" + + # Process the subproject appropriately. If enabled add it to the + # $enabled_subprojects running shell variable, set a + # SUBPROJECT_ENABLED C define, and include the appropriate + # 'subproject.ac'. + + +# { $as_echo "$as_me:${as_lineno-$LINENO}: configuring default subproject : pk" >&5 +#$as_echo "$as_me: configuring default subproject : pk" >&6;} +# ac_config_files="$ac_config_files pk.mk:pk/pk.mk.in" + +# enable_pk_sproj="yes" +# subprojects_enabled="$subprojects_enabled pk" + +$as_echo "#define PK_ENABLED /**/" >>confdefs.h + + # Check whether --enable-vm was given. +if test "${enable_vm+set}" = set; then : + enableval=$enable_vm; +fi + +if test "x$enable_vm" != "xno"; then : + + +$as_echo "#define PK_ENABLE_VM /**/" >>confdefs.h + + +fi + + + + + + # Determine if this is a required or an optional subproject + + + + # Determine if there is a group with the same name + + + + # Create variations of the subproject name suitable for use as a CPP + # enabled define, a shell enabled variable, and a shell function + + + + + + + + + + + + # Add subproject to our running list + + subprojects="$subprojects bbl" + + # Process the subproject appropriately. If enabled add it to the + # $enabled_subprojects running shell variable, set a + # SUBPROJECT_ENABLED C define, and include the appropriate + # 'subproject.ac'. + + + { $as_echo "$as_me:${as_lineno-$LINENO}: configuring default subproject : bbl" >&5 +$as_echo "$as_me: configuring default subproject : bbl" >&6;} + ac_config_files="$ac_config_files bbl.mk:bbl/bbl.mk.in" + + enable_bbl_sproj="yes" + subprojects_enabled="$subprojects_enabled bbl" + +$as_echo "#define BBL_ENABLED /**/" >>confdefs.h + + # Check whether --enable-logo was given. +if test "${enable_logo+set}" = set; then : + enableval=$enable_logo; +fi + +if test "x$enable_logo" == "xyes"; then : + + +$as_echo "#define PK_ENABLE_LOGO /**/" >>confdefs.h + + +fi + + +# Check whether --with-payload was given. +if test "${with_payload+set}" = set; then : + withval=$with_payload; BBL_PAYLOAD=$with_payload + +else + BBL_PAYLOAD=dummy_payload + +fi + + + +# Check whether --with-logo was given. +if test "${with_logo+set}" = set; then : + withval=$with_logo; BBL_LOGO_FILE=$with_logo + +else + BBL_LOGO_FILE=riscv_logo.txt + +fi + + + + + + + # Determine if this is a required or an optional subproject + + + + # Determine if there is a group with the same name + + + + # Create variations of the subproject name suitable for use as a CPP + # enabled define, a shell enabled variable, and a shell function + + + + + + + + + + + + # Add subproject to our running list + +# subprojects="$subprojects softfloat" + + # Process the subproject appropriately. If enabled add it to the + # $enabled_subprojects running shell variable, set a + # SUBPROJECT_ENABLED C define, and include the appropriate + # 'subproject.ac'. + + +# { $as_echo "$as_me:${as_lineno-$LINENO}: configuring default subproject : softfloat" >&5 +#$as_echo "$as_me: configuring default subproject : softfloat" >&6;} +# ac_config_files="$ac_config_files softfloat.mk:softfloat/softfloat.mk.in" + +# enable_softfloat_sproj="yes" +# subprojects_enabled="$subprojects_enabled softfloat" + +#$as_echo "#define SOFTFLOAT_ENABLED /**/" >>confdefs.h + + + + + + + # Determine if this is a required or an optional subproject + + + + # Determine if there is a group with the same name + + + + # Create variations of the subproject name suitable for use as a CPP + # enabled define, a shell enabled variable, and a shell function + + + + + + + + + + + + # Add subproject to our running list + + subprojects="$subprojects dummy_payload" + + # Process the subproject appropriately. If enabled add it to the + # $enabled_subprojects running shell variable, set a + # SUBPROJECT_ENABLED C define, and include the appropriate + # 'subproject.ac'. + + + { $as_echo "$as_me:${as_lineno-$LINENO}: configuring default subproject : dummy_payload" >&5 +$as_echo "$as_me: configuring default subproject : dummy_payload" >&6;} + ac_config_files="$ac_config_files dummy_payload.mk:dummy_payload/dummy_payload.mk.in" + + enable_dummy_payload_sproj="yes" + subprojects_enabled="$subprojects_enabled dummy_payload" + +$as_echo "#define DUMMY_PAYLOAD_ENABLED /**/" >>confdefs.h + + + + + + + # Determine if this is a required or an optional subproject + + + + # Determine if there is a group with the same name + + + + # Create variations of the subproject name suitable for use as a CPP + # enabled define, a shell enabled variable, and a shell function + + + + + + + + + + + + # Add subproject to our running list + + subprojects="$subprojects machine" + + # Process the subproject appropriately. If enabled add it to the + # $enabled_subprojects running shell variable, set a + # SUBPROJECT_ENABLED C define, and include the appropriate + # 'subproject.ac'. + + + { $as_echo "$as_me:${as_lineno-$LINENO}: configuring default subproject : machine" >&5 +$as_echo "$as_me: configuring default subproject : machine" >&6;} + ac_config_files="$ac_config_files machine.mk:machine/machine.mk.in" + + enable_machine_sproj="yes" + subprojects_enabled="$subprojects_enabled machine" + +$as_echo "#define MACHINE_ENABLED /**/" >>confdefs.h + + # Check whether --enable-fp-emulation was given. +if test "${enable_fp_emulation+set}" = set; then : + enableval=$enable_fp_emulation; +fi + +if test "x$enable_fp_emulation" != "xno"; then : + + +$as_echo "#define PK_ENABLE_FP_EMULATION /**/" >>confdefs.h + + +fi + + + + + + # Determine if this is a required or an optional subproject + + + + # Determine if there is a group with the same name + + + + # Create variations of the subproject name suitable for use as a CPP + # enabled define, a shell enabled variable, and a shell function + + + + + + + + + + + + # Add subproject to our running list + + subprojects="$subprojects util" + + # Process the subproject appropriately. If enabled add it to the + # $enabled_subprojects running shell variable, set a + # SUBPROJECT_ENABLED C define, and include the appropriate + # 'subproject.ac'. + + + { $as_echo "$as_me:${as_lineno-$LINENO}: configuring default subproject : util" >&5 +$as_echo "$as_me: configuring default subproject : util" >&6;} + ac_config_files="$ac_config_files util.mk:util/util.mk.in" + + enable_util_sproj="yes" + subprojects_enabled="$subprojects_enabled util" + +$as_echo "#define UTIL_ENABLED /**/" >>confdefs.h + + + + + + + # Output make variables + + + + + + +#------------------------------------------------------------------------- +# MCPPBS subproject groups +#------------------------------------------------------------------------- +# If a group has the same name as a subproject then you must add the +# '**' suffix in the subproject list above. The list of subprojects in a +# group should be ordered so that subprojets only depend on those listed +# earlier. Here is an example: +# +# MCPPBS_GROUP( [group-name], [sproja,sprojb,...] ) +# + +#------------------------------------------------------------------------- +# Output +#------------------------------------------------------------------------- + +ac_config_headers="$ac_config_headers config.h" + +ac_config_files="$ac_config_files Makefile" + +cat >confcache <<\_ACEOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs, see configure's option --config-cache. +# It is not useful on other systems. If it contains results you don't +# want to keep, you may remove or edit it. +# +# config.status only pays attention to the cache file if you give it +# the --recheck option to rerun configure. +# +# `ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* `ac_cv_foo' will be assigned the +# following values. + +_ACEOF + +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, we kill variables containing newlines. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +( + for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done + + (set) 2>&1 | + case $as_nl`(ac_space=' '; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + # `set' does not quote correctly, so add quotes: double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \. + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; #( + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) | + sed ' + /^ac_cv_env_/b end + t clear + :clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end + s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + :end' >>confcache +if diff "$cache_file" confcache >/dev/null 2>&1; then :; else + if test -w "$cache_file"; then + if test "x$cache_file" != "x/dev/null"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 +$as_echo "$as_me: updating cache $cache_file" >&6;} + if test ! -f "$cache_file" || test -h "$cache_file"; then + cat confcache >"$cache_file" + else + case $cache_file in #( + */* | ?:*) + mv -f confcache "$cache_file"$$ && + mv -f "$cache_file"$$ "$cache_file" ;; #( + *) + mv -f confcache "$cache_file" ;; + esac + fi + fi + else + { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 +$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} + fi +fi +rm -f confcache + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +DEFS=-DHAVE_CONFIG_H + +ac_libobjs= +ac_ltlibobjs= +U= +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' + ac_i=`$as_echo "$ac_i" | sed "$ac_script"` + # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR + # will be set to the directory where LIBOBJS objects are built. + as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" + as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' +done +LIBOBJS=$ac_libobjs + +LTLIBOBJS=$ac_ltlibobjs + + + +: "${CONFIG_STATUS=./config.status}" +ac_write_fail=0 +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files $CONFIG_STATUS" +{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 +$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} +as_write_fail=0 +cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 +#! $SHELL +# Generated by $as_me. +# Run this file to recreate the current configuration. +# Compiler output produced by configure, useful for debugging +# configure, is in config.log if it exists. + +debug=false +ac_cs_recheck=false +ac_cs_silent=false + +SHELL=\${CONFIG_SHELL-$SHELL} +export SHELL +_ASEOF +cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi + + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + + +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error + + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in #((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; +esac + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -pR'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -pR' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -pR' + fi +else + as_ln_s='cp -pR' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} # as_fn_mkdir_p +if mkdir -p . 2>/dev/null; then + as_mkdir_p='mkdir -p "$as_dir"' +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + + +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p +as_test_x='test -x' +as_executable_p=as_fn_executable_p + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +exec 6>&1 +## ----------------------------------- ## +## Main body of $CONFIG_STATUS script. ## +## ----------------------------------- ## +_ASEOF +test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# Save the log message, to keep $0 and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. +ac_log=" +This file was extended by RISC-V Proxy Kernel $as_me ?, which was +generated by GNU Autoconf 2.69. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +on `(hostname || uname -n) 2>/dev/null | sed 1q` +" + +_ACEOF + +case $ac_config_files in *" +"*) set x $ac_config_files; shift; ac_config_files=$*;; +esac + +case $ac_config_headers in *" +"*) set x $ac_config_headers; shift; ac_config_headers=$*;; +esac + + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# Files that config.status was made for. +config_files="$ac_config_files" +config_headers="$ac_config_headers" + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +ac_cs_usage="\ +\`$as_me' instantiates files and other configuration actions +from templates according to the current configuration. Unless the files +and actions are specified as TAGs, all are instantiated by default. + +Usage: $0 [OPTION]... [TAG]... + + -h, --help print this help, then exit + -V, --version print version number and configuration settings, then exit + --config print configuration, then exit + -q, --quiet, --silent + do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + --header=FILE[:TEMPLATE] + instantiate the configuration header FILE + +Configuration files: +$config_files + +Configuration headers: +$config_headers + +Report bugs to ." + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" +ac_cs_version="\\ +RISC-V Proxy Kernel config.status ? +configured by $0, generated by GNU Autoconf 2.69, + with options \\"\$ac_cs_config\\" + +Copyright (C) 2012 Free Software Foundation, Inc. +This config.status script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it." + +ac_pwd='$ac_pwd' +srcdir='$srcdir' +INSTALL='$INSTALL' +test -n "\$AWK" || AWK=awk +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# The default lists apply if the user does not specify any file. +ac_need_defaults=: +while test $# != 0 +do + case $1 in + --*=?*) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` + ac_shift=: + ;; + --*=) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg= + ac_shift=: + ;; + *) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + esac + + case $ac_option in + # Handling of the options. + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) + $as_echo "$ac_cs_version"; exit ;; + --config | --confi | --conf | --con | --co | --c ) + $as_echo "$ac_cs_config"; exit ;; + --debug | --debu | --deb | --de | --d | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + '') as_fn_error $? "missing file argument" ;; + esac + as_fn_append CONFIG_FILES " '$ac_optarg'" + ac_need_defaults=false;; + --header | --heade | --head | --hea ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + as_fn_append CONFIG_HEADERS " '$ac_optarg'" + ac_need_defaults=false;; + --he | --h) + # Conflict between --help and --header + as_fn_error $? "ambiguous option: \`$1' +Try \`$0 --help' for more information.";; + --help | --hel | -h ) + $as_echo "$ac_cs_usage"; exit ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. + -*) as_fn_error $? "unrecognized option: \`$1' +Try \`$0 --help' for more information." ;; + + *) as_fn_append ac_config_targets " $1" + ac_need_defaults=false ;; + + esac + shift +done + +ac_configure_extra_args= + +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +if \$ac_cs_recheck; then + set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + shift + \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 + CONFIG_SHELL='$SHELL' + export CONFIG_SHELL + exec "\$@" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX + $as_echo "$ac_log" +} >&5 + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + +# Handling of arguments. +for ac_config_target in $ac_config_targets +do + case $ac_config_target in + "pk.mk") CONFIG_FILES="$CONFIG_FILES pk.mk:pk/pk.mk.in" ;; + "bbl.mk") CONFIG_FILES="$CONFIG_FILES bbl.mk:bbl/bbl.mk.in" ;; + "softfloat.mk") CONFIG_FILES="$CONFIG_FILES softfloat.mk:softfloat/softfloat.mk.in" ;; + "dummy_payload.mk") CONFIG_FILES="$CONFIG_FILES dummy_payload.mk:dummy_payload/dummy_payload.mk.in" ;; + "machine.mk") CONFIG_FILES="$CONFIG_FILES machine.mk:machine/machine.mk.in" ;; + "util.mk") CONFIG_FILES="$CONFIG_FILES util.mk:util/util.mk.in" ;; + "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; + "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; + + *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; + esac +done + + +# If the user did not use the arguments to specify the items to instantiate, +# then the envvar interface is used. Set only those that are not. +# We use the long form for the default assignment because of an extremely +# bizarre bug on SunOS 4.1.3. +if $ac_need_defaults; then + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files + test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers +fi + +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason against having it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Hook for its removal unless debugging. +# Note that there is a small window in which the directory will not be cleaned: +# after its creation but before its name has been assigned to `$tmp'. +$debug || +{ + tmp= ac_tmp= + trap 'exit_status=$? + : "${ac_tmp:=$tmp}" + { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status +' 0 + trap 'as_fn_exit 1' 1 2 13 15 +} +# Create a (secure) tmp directory for tmp files. + +{ + tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && + test -d "$tmp" +} || +{ + tmp=./conf$$-$RANDOM + (umask 077 && mkdir "$tmp") +} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 +ac_tmp=$tmp + +# Set up the scripts for CONFIG_FILES section. +# No need to generate them if there are no CONFIG_FILES. +# This happens for instance with `./config.status config.h'. +if test -n "$CONFIG_FILES"; then + + +ac_cr=`echo X | tr X '\015'` +# On cygwin, bash can eat \r inside `` if the user requested igncr. +# But we know of no other shell where ac_cr would be empty at this +# point, so we can use a bashism as a fallback. +if test "x$ac_cr" = x; then + eval ac_cr=\$\'\\r\' +fi +ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` +if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then + ac_cs_awk_cr='\\r' +else + ac_cs_awk_cr=$ac_cr +fi + +echo 'BEGIN {' >"$ac_tmp/subs1.awk" && +_ACEOF + + +{ + echo "cat >conf$$subs.awk <<_ACEOF" && + echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && + echo "_ACEOF" +} >conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 +ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` +ac_delim='%!_!# ' +for ac_last_try in false false false false false :; do + . ./conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + + ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` + if test $ac_delim_n = $ac_delim_num; then + break + elif $ac_last_try; then + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done +rm -f conf$$subs.sh + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && +_ACEOF +sed -n ' +h +s/^/S["/; s/!.*/"]=/ +p +g +s/^[^!]*!// +:repl +t repl +s/'"$ac_delim"'$// +t delim +:nl +h +s/\(.\{148\}\)..*/\1/ +t more1 +s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ +p +n +b repl +:more1 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t nl +:delim +h +s/\(.\{148\}\)..*/\1/ +t more2 +s/["\\]/\\&/g; s/^/"/; s/$/"/ +p +b +:more2 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t delim +' >$CONFIG_STATUS || ac_write_fail=1 +rm -f conf$$subs.awk +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +_ACAWK +cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && + for (key in S) S_is_set[key] = 1 + FS = "" + +} +{ + line = $ 0 + nfields = split(line, field, "@") + substed = 0 + len = length(field[1]) + for (i = 2; i < nfields; i++) { + key = field[i] + keylen = length(key) + if (S_is_set[key]) { + value = S[key] + line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) + len += length(value) + length(field[++i]) + substed = 1 + } else + len += 1 + keylen + } + + print line +} + +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then + sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" +else + cat +fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ + || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 +_ACEOF + +# VPATH may cause trouble with some makes, so we remove sole $(srcdir), +# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ +h +s/// +s/^/:/ +s/[ ]*$/:/ +s/:\$(srcdir):/:/g +s/:\${srcdir}:/:/g +s/:@srcdir@:/:/g +s/^:*// +s/:*$// +x +s/\(=[ ]*\).*/\1/ +G +s/\n// +s/^[^=]*=[ ]*$// +}' +fi + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +fi # test -n "$CONFIG_FILES" + +# Set up the scripts for CONFIG_HEADERS section. +# No need to generate them if there are no CONFIG_HEADERS. +# This happens for instance with `./config.status Makefile'. +if test -n "$CONFIG_HEADERS"; then +cat >"$ac_tmp/defines.awk" <<\_ACAWK || +BEGIN { +_ACEOF + +# Transform confdefs.h into an awk script `defines.awk', embedded as +# here-document in config.status, that substitutes the proper values into +# config.h.in to produce config.h. + +# Create a delimiter string that does not exist in confdefs.h, to ease +# handling of long lines. +ac_delim='%!_!# ' +for ac_last_try in false false :; do + ac_tt=`sed -n "/$ac_delim/p" confdefs.h` + if test -z "$ac_tt"; then + break + elif $ac_last_try; then + as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done + +# For the awk script, D is an array of macro values keyed by name, +# likewise P contains macro parameters if any. Preserve backslash +# newline sequences. + +ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* +sed -n ' +s/.\{148\}/&'"$ac_delim"'/g +t rset +:rset +s/^[ ]*#[ ]*define[ ][ ]*/ / +t def +d +:def +s/\\$// +t bsnl +s/["\\]/\\&/g +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +D["\1"]=" \3"/p +s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p +d +:bsnl +s/["\\]/\\&/g +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +D["\1"]=" \3\\\\\\n"\\/p +t cont +s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p +t cont +d +:cont +n +s/.\{148\}/&'"$ac_delim"'/g +t clear +:clear +s/\\$// +t bsnlc +s/["\\]/\\&/g; s/^/"/; s/$/"/p +d +:bsnlc +s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p +b cont +' >$CONFIG_STATUS || ac_write_fail=1 + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + for (key in D) D_is_set[key] = 1 + FS = "" +} +/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { + line = \$ 0 + split(line, arg, " ") + if (arg[1] == "#") { + defundef = arg[2] + mac1 = arg[3] + } else { + defundef = substr(arg[1], 2) + mac1 = arg[2] + } + split(mac1, mac2, "(") #) + macro = mac2[1] + prefix = substr(line, 1, index(line, defundef) - 1) + if (D_is_set[macro]) { + # Preserve the white space surrounding the "#". + print prefix "define", macro P[macro] D[macro] + next + } else { + # Replace #undef with comments. This is necessary, for example, + # in the case of _POSIX_SOURCE, which is predefined and required + # on some systems where configure will not decide to define it. + if (defundef == "undef") { + print "/*", prefix defundef, macro, "*/" + next + } + } +} +{ print } +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 +fi # test -n "$CONFIG_HEADERS" + + +eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS " +shift +for ac_tag +do + case $ac_tag in + :[FHLC]) ac_mode=$ac_tag; continue;; + esac + case $ac_mode$ac_tag in + :[FHL]*:*);; + :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; + :[FH]-) ac_tag=-:-;; + :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; + esac + ac_save_IFS=$IFS + IFS=: + set x $ac_tag + IFS=$ac_save_IFS + shift + ac_file=$1 + shift + + case $ac_mode in + :L) ac_source=$1;; + :[FH]) + ac_file_inputs= + for ac_f + do + case $ac_f in + -) ac_f="$ac_tmp/stdin";; + *) # Look for the file first in the build tree, then in the source tree + # (if the path is not absolute). The absolute path cannot be DOS-style, + # because $ac_f cannot contain `:'. + test -f "$ac_f" || + case $ac_f in + [\\/$]*) false;; + *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; + esac || + as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; + esac + case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac + as_fn_append ac_file_inputs " '$ac_f'" + done + + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + configure_input='Generated from '` + $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' + `' by configure.' + if test x"$ac_file" != x-; then + configure_input="$ac_file. $configure_input" + { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 +$as_echo "$as_me: creating $ac_file" >&6;} + fi + # Neutralize special characters interpreted by sed in replacement strings. + case $configure_input in #( + *\&* | *\|* | *\\* ) + ac_sed_conf_input=`$as_echo "$configure_input" | + sed 's/[\\\\&|]/\\\\&/g'`;; #( + *) ac_sed_conf_input=$configure_input;; + esac + + case $ac_tag in + *:-:* | *:-) cat >"$ac_tmp/stdin" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; + esac + ;; + esac + + ac_dir=`$as_dirname -- "$ac_file" || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + as_dir="$ac_dir"; as_fn_mkdir_p + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + + case $ac_mode in + :F) + # + # CONFIG_FILE + # + + case $INSTALL in + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; + *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; + esac +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# If the template does not know about datarootdir, expand it. +# FIXME: This hack should be removed a few years after 2.60. +ac_datarootdir_hack=; ac_datarootdir_seen= +ac_sed_dataroot=' +/datarootdir/ { + p + q +} +/@datadir@/p +/@docdir@/p +/@infodir@/p +/@localedir@/p +/@mandir@/p' +case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in +*datarootdir*) ac_datarootdir_seen=yes;; +*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 +$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + ac_datarootdir_hack=' + s&@datadir@&$datadir&g + s&@docdir@&$docdir&g + s&@infodir@&$infodir&g + s&@localedir@&$localedir&g + s&@mandir@&$mandir&g + s&\\\${datarootdir}&$datarootdir&g' ;; +esac +_ACEOF + +# Neutralize VPATH when `$srcdir' = `.'. +# Shell code in configure.ac might set extrasub. +# FIXME: do we really want to maintain this feature? +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_sed_extra="$ac_vpsub +$extrasub +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +:t +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +s|@configure_input@|$ac_sed_conf_input|;t t +s&@top_builddir@&$ac_top_builddir_sub&;t t +s&@top_build_prefix@&$ac_top_build_prefix&;t t +s&@srcdir@&$ac_srcdir&;t t +s&@abs_srcdir@&$ac_abs_srcdir&;t t +s&@top_srcdir@&$ac_top_srcdir&;t t +s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t +s&@builddir@&$ac_builddir&;t t +s&@abs_builddir@&$ac_abs_builddir&;t t +s&@abs_top_builddir@&$ac_abs_top_builddir&;t t +s&@INSTALL@&$ac_INSTALL&;t t +$ac_datarootdir_hack +" +eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ + >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + +test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && + { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ + "$ac_tmp/out"`; test -z "$ac_out"; } && + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&5 +$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&2;} + + rm -f "$ac_tmp/stdin" + case $ac_file in + -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; + *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; + esac \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + ;; + :H) + # + # CONFIG_HEADER + # + if test x"$ac_file" != x-; then + { + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" + } >"$ac_tmp/config.h" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then + { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 +$as_echo "$as_me: $ac_file is unchanged" >&6;} + else + rm -f "$ac_file" + mv "$ac_tmp/config.h" "$ac_file" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + fi + else + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ + || as_fn_error $? "could not create -" "$LINENO" 5 + fi + ;; + + + esac + +done # for ac_tag + + +as_fn_exit 0 +_ACEOF +ac_clean_files=$ac_clean_files_save + +test $ac_write_fail = 0 || + as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 + + +# configure is writing to config.log, and then calls config.status. +# config.status does its own redirection, appending to config.log. +# Unfortunately, on DOS this fails, as config.log is still kept open +# by configure, so config.status won't be able to write to it; its +# output is simply discarded. So we exec the FD to /dev/null, +# effectively closing config.log, so it can be properly (re)opened and +# appended to by config.status. When coming back to configure, we +# need to make the FD available again. +if test "$no_create" != yes; then + ac_cs_success=: + ac_config_status_args= + test "$silent" = yes && + ac_config_status_args="$ac_config_status_args --quiet" + exec 5>/dev/null + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false + exec 5>>config.log + # Use ||, not &&, to avoid exiting from the if with $? = 1, which + # would make configure fail if this is the last instruction. + $ac_cs_success || as_fn_exit 1 +fi +if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 +$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} +fi + diff --git a/riscv-pk/configure.ac b/riscv-pk/configure.ac new file mode 100644 index 0000000..5c08278 --- /dev/null +++ b/riscv-pk/configure.ac @@ -0,0 +1,138 @@ +#========================================================================= +# Toplevel configure.ac for the Modular C++ Build System +#========================================================================= +# Please read the documenation in 'mcppbs-doc.txt' for more details on +# how the Modular C++ Build System works. For most new projects, a +# developer will only need to make the following changes: +# +# - change the project metadata listed right below +# - update the list of subprojects via the 'MCPPBS_SUBPROJECTS' macro +# - possibly add subproject groups if needed to ease configuration +# - add more configure checks for platform specific configuration +# + +#------------------------------------------------------------------------- +# Project metadata +#------------------------------------------------------------------------- + +m4_define( proj_name, [RISC-V Proxy Kernel]) +m4_define( proj_maintainer, [Andrew Waterman]) +m4_define( proj_abbreviation, [riscv-pk]) + +#------------------------------------------------------------------------- +# Project version information +#------------------------------------------------------------------------- +# Version information is meant to be managed through a version control +# system's tags and revision numbers. In a working copy the version will +# not be defined here (you should just use the version control system's +# mechanisms). When we make a distribution then we can set the version +# here as formed by the scripts/vcs-version.sh script so that the +# distribution knows what version it came from. If you are not using +# version control then it is fine to set this directly. + +m4_define( proj_version, [?]) + +#------------------------------------------------------------------------- +# Setup +#------------------------------------------------------------------------- + +AC_INIT(proj_name,proj_version,proj_maintainer,proj_abbreviation) +AC_CONFIG_SRCDIR([pk/pk.h]) +AC_CONFIG_AUX_DIR([scripts]) +AC_CANONICAL_BUILD +AC_CANONICAL_HOST + +#------------------------------------------------------------------------- +# Checks for programs +#------------------------------------------------------------------------- + +AC_PROG_CC +AC_PROG_CXX +AC_CHECK_TOOL([AR],[ar]) +AC_CHECK_TOOL([RANLIB],[ranlib]) +AC_CHECK_TOOL([READELF],[readelf]) +AC_CHECK_TOOL([OBJCOPY],[objcopy]) + +#------------------------------------------------------------------------- +# MCPPBS specific program checks +#------------------------------------------------------------------------- +# These macros check to see if we can do a stow-based install and also +# check for an isa simulator suitable for running the unit test programs +# via the makefile. + +MCPPBS_PROG_INSTALL + +#------------------------------------------------------------------------- +# Checks for header files +#------------------------------------------------------------------------- + +AC_HEADER_STDC + +#------------------------------------------------------------------------- +# Register RISCV environment variable +#------------------------------------------------------------------------- + +AC_ARG_VAR(RISCV, [top-level RISC-V install directory]) + +#------------------------------------------------------------------------- +# Set compiler flags +#------------------------------------------------------------------------- + +default_CFLAGS="-Wall -Werror -D__NO_INLINE__ -mcmodel=medany -O2 -std=gnu99 -Wno-unused -Wno-attributes -fno-delete-null-pointer-checks" + +AC_ARG_ENABLE([32bit], + AS_HELP_STRING([--enable-32bit], [Build a 32-bit pk]), + BUILD_32BIT=$enableval, + BUILD_32BIT=no) + +case "${BUILD_32BIT}" in + yes|default) + echo "Building 32-bit pk" + CFLAGS="$default_CFLAGS -m32" + LDFLAGS="-m32" + install_subdir="riscv32-unknown-elf" + ;; + *) + CFLAGS="$default_CFLAGS" + LDFLAGS= + install_subdir="riscv64-unknown-elf" + ;; +esac + +AC_ARG_ENABLE([print-device-tree], AS_HELP_STRING([--enable-print-device-tree], [Print DTS when booting])) +AS_IF([test "x$enable_print_device_tree" == "xyes"], [ + AC_DEFINE([PK_PRINT_DEVICE_TREE],,[Define if the DTS is to be displayed]) +]) + +AC_SUBST(CFLAGS) +AC_SUBST(LDFLAGS) +AC_SUBST([LIBS], ["-lgcc"]) +AC_SUBST(install_subdir) + +#------------------------------------------------------------------------- +# MCPPBS subproject list +#------------------------------------------------------------------------- +# Order list so that subprojects only depend on those listed earlier. +# The '*' suffix indicates an optional subproject. The '**' suffix +# indicates an optional subproject which is also the name of a group. + +MCPPBS_SUBPROJECTS([ pk, bbl, dummy_payload, machine, util ]) + +#------------------------------------------------------------------------- +# MCPPBS subproject groups +#------------------------------------------------------------------------- +# If a group has the same name as a subproject then you must add the +# '**' suffix in the subproject list above. The list of subprojects in a +# group should be ordered so that subprojets only depend on those listed +# earlier. Here is an example: +# +# MCPPBS_GROUP( [group-name], [sproja,sprojb,...] ) +# + +#------------------------------------------------------------------------- +# Output +#------------------------------------------------------------------------- + +AC_CONFIG_HEADERS([config.h]) +AC_CONFIG_FILES([Makefile]) +AC_OUTPUT diff --git a/riscv-pk/dummy_payload/dummy_entry.S b/riscv-pk/dummy_payload/dummy_entry.S new file mode 100644 index 0000000..92d4652 --- /dev/null +++ b/riscv-pk/dummy_payload/dummy_entry.S @@ -0,0 +1,22 @@ +#include "mcall.h" + + .section ".text.init" + .globl _start +_start: + la s0, str +1: + lbu a0, (s0) + beqz a0, 1f + li a7, SBI_CONSOLE_PUTCHAR + ecall + add s0, s0, 1 + j 1b + +1: + li a7, SBI_SHUTDOWN + ecall + + .data +str: + .asciz "This is bbl's dummy_payload. To boot a real kernel, reconfigure\n\ +bbl with the flag --with-payload=PATH, then rebuild bbl.\n" diff --git a/riscv-pk/dummy_payload/dummy_payload.ac b/riscv-pk/dummy_payload/dummy_payload.ac new file mode 100644 index 0000000..e69de29 diff --git a/riscv-pk/dummy_payload/dummy_payload.c b/riscv-pk/dummy_payload/dummy_payload.c new file mode 100644 index 0000000..e69de29 diff --git a/riscv-pk/dummy_payload/dummy_payload.lds b/riscv-pk/dummy_payload/dummy_payload.lds new file mode 100644 index 0000000..0506a8d --- /dev/null +++ b/riscv-pk/dummy_payload/dummy_payload.lds @@ -0,0 +1,7 @@ +ENTRY(_start) + +SECTIONS { + . = -0x80000000; + + .text.init : { *(.text.init) } +} diff --git a/riscv-pk/dummy_payload/dummy_payload.mk.in b/riscv-pk/dummy_payload/dummy_payload.mk.in new file mode 100644 index 0000000..4a133be --- /dev/null +++ b/riscv-pk/dummy_payload/dummy_payload.mk.in @@ -0,0 +1,13 @@ +dummy_payload_subproject_deps = \ + +dummy_payload_hdrs = \ + +dummy_payload_c_srcs = \ + +dummy_payload_asm_srcs = \ + dummy_entry.S \ + +dummy_payload_test_srcs = + +dummy_payload_install_prog_srcs = \ + dummy_payload.c \ diff --git a/riscv-pk/machine/atomic.h b/riscv-pk/machine/atomic.h new file mode 100644 index 0000000..fe81566 --- /dev/null +++ b/riscv-pk/machine/atomic.h @@ -0,0 +1,78 @@ +// See LICENSE for license details. + +#ifndef _RISCV_ATOMIC_H +#define _RISCV_ATOMIC_H + +#include "config.h" +#include "encoding.h" + +// Currently, interrupts are always disabled in M-mode. +#define disable_irqsave() (0) +#define enable_irqrestore(flags) ((void) (flags)) + +typedef struct { int lock; } spinlock_t; +#define SPINLOCK_INIT {0} + +#define mb() asm volatile ("fence" ::: "memory") +#define atomic_set(ptr, val) (*(volatile typeof(*(ptr)) *)(ptr) = val) +#define atomic_read(ptr) (*(volatile typeof(*(ptr)) *)(ptr)) + +#ifdef __riscv_atomic +# define atomic_add(ptr, inc) __sync_fetch_and_add(ptr, inc) +# define atomic_or(ptr, inc) __sync_fetch_and_or(ptr, inc) +# define atomic_swap(ptr, swp) __sync_lock_test_and_set(ptr, swp) +# define atomic_cas(ptr, cmp, swp) __sync_val_compare_and_swap(ptr, cmp, swp) +#else +# define atomic_binop(ptr, inc, op) ({ \ + long flags = disable_irqsave(); \ + typeof(*(ptr)) res = atomic_read(ptr); \ + atomic_set(ptr, op); \ + enable_irqrestore(flags); \ + res; }) +# define atomic_add(ptr, inc) atomic_binop(ptr, inc, res + (inc)) +# define atomic_or(ptr, inc) atomic_binop(ptr, inc, res | (inc)) +# define atomic_swap(ptr, inc) atomic_binop(ptr, inc, (inc)) +# define atomic_cas(ptr, cmp, swp) ({ \ + long flags = disable_irqsave(); \ + typeof(*(ptr)) res = *(volatile typeof(*(ptr)) *)(ptr); \ + if (res == (cmp)) *(volatile typeof(ptr))(ptr) = (swp); \ + enable_irqrestore(flags); \ + res; }) +#endif + +static inline int spinlock_trylock(spinlock_t* lock) +{ + int res = atomic_swap(&lock->lock, -1); + mb(); + return res; +} + +static inline void spinlock_lock(spinlock_t* lock) +{ + do + { + while (atomic_read(&lock->lock)) + ; + } while (spinlock_trylock(lock)); +} + +static inline void spinlock_unlock(spinlock_t* lock) +{ + mb(); + atomic_set(&lock->lock,0); +} + +static inline long spinlock_lock_irqsave(spinlock_t* lock) +{ + long flags = disable_irqsave(); + spinlock_lock(lock); + return flags; +} + +static inline void spinlock_unlock_irqrestore(spinlock_t* lock, long flags) +{ + spinlock_unlock(lock); + enable_irqrestore(flags); +} + +#endif diff --git a/riscv-pk/machine/bits.h b/riscv-pk/machine/bits.h new file mode 100644 index 0000000..e578903 --- /dev/null +++ b/riscv-pk/machine/bits.h @@ -0,0 +1,35 @@ +#ifndef _RISCV_BITS_H +#define _RISCV_BITS_H + +#define likely(x) __builtin_expect((x), 1) +#define unlikely(x) __builtin_expect((x), 0) + +#define ROUNDUP(a, b) ((((a)-1)/(b)+1)*(b)) +#define ROUNDDOWN(a, b) ((a)/(b)*(b)) + +#define MAX(a, b) ((a) > (b) ? (a) : (b)) +#define MIN(a, b) ((a) < (b) ? (a) : (b)) +#define CLAMP(a, lo, hi) MIN(MAX(a, lo), hi) + +#define EXTRACT_FIELD(val, which) (((val) & (which)) / ((which) & ~((which)-1))) +#define INSERT_FIELD(val, which, fieldval) (((val) & ~(which)) | ((fieldval) * ((which) & ~((which)-1)))) + +#define STR(x) XSTR(x) +#define XSTR(x) #x + +#if __riscv_xlen == 64 +# define SLL32 sllw +# define STORE sd +# define LOAD ld +# define LWU lwu +# define LOG_REGBYTES 3 +#else +# define SLL32 sll +# define STORE sw +# define LOAD lw +# define LWU lw +# define LOG_REGBYTES 2 +#endif +#define REGBYTES (1 << LOG_REGBYTES) + +#endif diff --git a/riscv-pk/machine/disabled_hart_mask.h b/riscv-pk/machine/disabled_hart_mask.h new file mode 100644 index 0000000..2a3a73c --- /dev/null +++ b/riscv-pk/machine/disabled_hart_mask.h @@ -0,0 +1,4 @@ +#ifndef DISABLED_HART_MASK_H +#define DISABLED_HART_MASK_H +extern long disabled_hart_mask; +#endif diff --git a/riscv-pk/machine/emulation.c b/riscv-pk/machine/emulation.c new file mode 100644 index 0000000..eb535d8 --- /dev/null +++ b/riscv-pk/machine/emulation.c @@ -0,0 +1,234 @@ +#include "emulation.h" +//#include "fp_emulation.h" +#include "config.h" +#include "unprivileged_memory.h" +#include "mtrap.h" +#include + +static DECLARE_EMULATION_FUNC(emulate_rvc) +{ +#ifdef __riscv_compressed + // the only emulable RVC instructions are FP loads and stores. +# if !defined(__riscv_flen) && defined(PK_ENABLE_FP_EMULATION) + write_csr(mepc, mepc + 2); + + // if FPU is disabled, punt back to the OS + if (unlikely((mstatus & MSTATUS_FS) == 0)) + return truly_illegal_insn(regs, mcause, mepc, mstatus, insn); + + if ((insn & MASK_C_FLD) == MATCH_C_FLD) { + uintptr_t addr = GET_RS1S(insn, regs) + RVC_LD_IMM(insn); + if (unlikely(addr % sizeof(uintptr_t))) + return misaligned_load_trap(regs, mcause, mepc); + SET_F64_RD(RVC_RS2S(insn) << SH_RD, regs, load_uint64_t((void *)addr, mepc)); + } else if ((insn & MASK_C_FLDSP) == MATCH_C_FLDSP) { + uintptr_t addr = GET_SP(regs) + RVC_LDSP_IMM(insn); + if (unlikely(addr % sizeof(uintptr_t))) + return misaligned_load_trap(regs, mcause, mepc); + SET_F64_RD(insn, regs, load_uint64_t((void *)addr, mepc)); + } else if ((insn & MASK_C_FSD) == MATCH_C_FSD) { + uintptr_t addr = GET_RS1S(insn, regs) + RVC_LD_IMM(insn); + if (unlikely(addr % sizeof(uintptr_t))) + return misaligned_store_trap(regs, mcause, mepc); + store_uint64_t((void *)addr, GET_F64_RS2(RVC_RS2S(insn) << SH_RS2, regs), mepc); + } else if ((insn & MASK_C_FSDSP) == MATCH_C_FSDSP) { + uintptr_t addr = GET_SP(regs) + RVC_SDSP_IMM(insn); + if (unlikely(addr % sizeof(uintptr_t))) + return misaligned_store_trap(regs, mcause, mepc); + store_uint64_t((void *)addr, GET_F64_RS2(RVC_RS2(insn) << SH_RS2, regs), mepc); + } else +# if __riscv_xlen == 32 + if ((insn & MASK_C_FLW) == MATCH_C_FLW) { + uintptr_t addr = GET_RS1S(insn, regs) + RVC_LW_IMM(insn); + if (unlikely(addr % 4)) + return misaligned_load_trap(regs, mcause, mepc); + SET_F32_RD(RVC_RS2S(insn) << SH_RD, regs, load_int32_t((void *)addr, mepc)); + } else if ((insn & MASK_C_FLWSP) == MATCH_C_FLWSP) { + uintptr_t addr = GET_SP(regs) + RVC_LWSP_IMM(insn); + if (unlikely(addr % 4)) + return misaligned_load_trap(regs, mcause, mepc); + SET_F32_RD(insn, regs, load_int32_t((void *)addr, mepc)); + } else if ((insn & MASK_C_FSW) == MATCH_C_FSW) { + uintptr_t addr = GET_RS1S(insn, regs) + RVC_LW_IMM(insn); + if (unlikely(addr % 4)) + return misaligned_store_trap(regs, mcause, mepc); + store_uint32_t((void *)addr, GET_F32_RS2(RVC_RS2S(insn) << SH_RS2, regs), mepc); + } else if ((insn & MASK_C_FSWSP) == MATCH_C_FSWSP) { + uintptr_t addr = GET_SP(regs) + RVC_SWSP_IMM(insn); + if (unlikely(addr % 4)) + return misaligned_store_trap(regs, mcause, mepc); + store_uint32_t((void *)addr, GET_F32_RS2(RVC_RS2(insn) << SH_RS2, regs), mepc); + } else +# endif +# endif +#endif + + return truly_illegal_insn(regs, mcause, mepc, mstatus, insn); +} + +void illegal_insn_trap(uintptr_t* regs, uintptr_t mcause, uintptr_t mepc) +{ + asm (".pushsection .rodata\n" + "illegal_insn_trap_table:\n" + " .word truly_illegal_insn\n" +#if !defined(__riscv_flen) && defined(PK_ENABLE_FP_EMULATION) + " .word emulate_float_load\n" +#else + " .word truly_illegal_insn\n" +#endif + " .word truly_illegal_insn\n" + " .word truly_illegal_insn\n" + " .word truly_illegal_insn\n" + " .word truly_illegal_insn\n" + " .word truly_illegal_insn\n" + " .word truly_illegal_insn\n" + " .word truly_illegal_insn\n" +#if !defined(__riscv_flen) && defined(PK_ENABLE_FP_EMULATION) + " .word emulate_float_store\n" +#else + " .word truly_illegal_insn\n" +#endif + " .word truly_illegal_insn\n" + " .word truly_illegal_insn\n" +#if !defined(__riscv_muldiv) + " .word emulate_mul_div\n" +#else + " .word truly_illegal_insn\n" +#endif + " .word truly_illegal_insn\n" +#if !defined(__riscv_muldiv) && __riscv_xlen >= 64 + " .word emulate_mul_div32\n" +#else + " .word truly_illegal_insn\n" +#endif + " .word truly_illegal_insn\n" +#ifdef PK_ENABLE_FP_EMULATION + " .word emulate_fmadd\n" + " .word emulate_fmadd\n" + " .word emulate_fmadd\n" + " .word emulate_fmadd\n" + " .word emulate_fp\n" +#else + " .word truly_illegal_insn\n" + " .word truly_illegal_insn\n" + " .word truly_illegal_insn\n" + " .word truly_illegal_insn\n" + " .word truly_illegal_insn\n" +#endif + " .word truly_illegal_insn\n" + " .word truly_illegal_insn\n" + " .word truly_illegal_insn\n" + " .word truly_illegal_insn\n" + " .word truly_illegal_insn\n" + " .word truly_illegal_insn\n" + " .word truly_illegal_insn\n" + " .word emulate_system_opcode\n" + " .word truly_illegal_insn\n" + " .word truly_illegal_insn\n" + " .word truly_illegal_insn\n" + " .popsection"); + + uintptr_t mstatus = read_csr(mstatus); + insn_t insn = read_csr(mbadaddr); + + if (unlikely((insn & 3) != 3)) { + if (insn == 0) + insn = get_insn(mepc, &mstatus); + if ((insn & 3) != 3) + return emulate_rvc(regs, mcause, mepc, mstatus, insn); + } + + write_csr(mepc, mepc + 4); + + extern uint32_t illegal_insn_trap_table[]; + uint32_t* pf = (void*)illegal_insn_trap_table + (insn & 0x7c); + emulation_func f = (emulation_func)(uintptr_t)*pf; + f(regs, mcause, mepc, mstatus, insn); +} + +__attribute__((noinline)) +DECLARE_EMULATION_FUNC(truly_illegal_insn) +{ + return redirect_trap(mepc, mstatus, insn); +} + +static inline int emulate_read_csr(int num, uintptr_t mstatus, uintptr_t* result) +{ + uintptr_t counteren = -1; + if (EXTRACT_FIELD(mstatus, MSTATUS_MPP) == PRV_U) + counteren = read_csr(scounteren); + + switch (num) + { + case CSR_TIME: + if (!((counteren >> (CSR_TIME - CSR_CYCLE)) & 1)) + return -1; + *result = *mtime; + return 0; +#if __riscv_xlen == 32 + case CSR_TIMEH: + if (!((counteren >> (CSR_TIME - CSR_CYCLE)) & 1)) + return -1; + *result = *mtime >> 32; + return 0; +#endif +#if !defined(__riscv_flen) && defined(PK_ENABLE_FP_EMULATION) + case CSR_FRM: + if ((mstatus & MSTATUS_FS) == 0) break; + *result = GET_FRM(); + return 0; + case CSR_FFLAGS: + if ((mstatus & MSTATUS_FS) == 0) break; + *result = GET_FFLAGS(); + return 0; + case CSR_FCSR: + if ((mstatus & MSTATUS_FS) == 0) break; + *result = GET_FCSR(); + return 0; +#endif + } + return -1; +} + +static inline int emulate_write_csr(int num, uintptr_t value, uintptr_t mstatus) +{ + switch (num) + { +#if !defined(__riscv_flen) && defined(PK_ENABLE_FP_EMULATION) + case CSR_FRM: SET_FRM(value); return 0; + case CSR_FFLAGS: SET_FFLAGS(value); return 0; + case CSR_FCSR: SET_FCSR(value); return 0; +#endif + } + return -1; +} + +DECLARE_EMULATION_FUNC(emulate_system_opcode) +{ + int rs1_num = (insn >> 15) & 0x1f; + uintptr_t rs1_val = GET_RS1(insn, regs); + int csr_num = (uint32_t)insn >> 20; + uintptr_t csr_val, new_csr_val; + + if (emulate_read_csr(csr_num, mstatus, &csr_val)) + return truly_illegal_insn(regs, mcause, mepc, mstatus, insn); + + int do_write = rs1_num; +#if 0 + switch (GET_RM(insn)) + { + case 0: return truly_illegal_insn(regs, mcause, mepc, mstatus, insn); + case 1: new_csr_val = rs1_val; do_write = 1; break; + case 2: new_csr_val = csr_val | rs1_val; break; + case 3: new_csr_val = csr_val & ~rs1_val; break; + case 4: return truly_illegal_insn(regs, mcause, mepc, mstatus, insn); + case 5: new_csr_val = rs1_num; do_write = 1; break; + case 6: new_csr_val = csr_val | rs1_num; break; + case 7: new_csr_val = csr_val & ~rs1_num; break; + } +#endif + if (do_write && emulate_write_csr(csr_num, new_csr_val, mstatus)) + return truly_illegal_insn(regs, mcause, mepc, mstatus, insn); + + SET_RD(insn, regs, csr_val); +} diff --git a/riscv-pk/machine/emulation.h b/riscv-pk/machine/emulation.h new file mode 100644 index 0000000..f75173d --- /dev/null +++ b/riscv-pk/machine/emulation.h @@ -0,0 +1,51 @@ +#ifndef _RISCV_EMULATION_H +#define _RISCV_EMULATION_H + +#include "encoding.h" +#include "bits.h" +#include + +typedef uintptr_t insn_t; +typedef void (*emulation_func)(uintptr_t*, uintptr_t, uintptr_t, uintptr_t, insn_t); +#define DECLARE_EMULATION_FUNC(name) void name(uintptr_t* regs, uintptr_t mcause, uintptr_t mepc, uintptr_t mstatus, insn_t insn) + +void misaligned_load_trap(uintptr_t* regs, uintptr_t mcause, uintptr_t mepc); +void misaligned_store_trap(uintptr_t* regs, uintptr_t mcause, uintptr_t mepc); +void redirect_trap(uintptr_t epc, uintptr_t mstatus, uintptr_t badaddr); +DECLARE_EMULATION_FUNC(truly_illegal_insn); +DECLARE_EMULATION_FUNC(emulate_rvc_0); +DECLARE_EMULATION_FUNC(emulate_rvc_2); + +#define SH_RD 7 +#define SH_RS1 15 +#define SH_RS2 20 +#define SH_RS2C 2 + +#define RV_X(x, s, n) (((x) >> (s)) & ((1 << (n)) - 1)) +#define RVC_LW_IMM(x) ((RV_X(x, 6, 1) << 2) | (RV_X(x, 10, 3) << 3) | (RV_X(x, 5, 1) << 6)) +#define RVC_LD_IMM(x) ((RV_X(x, 10, 3) << 3) | (RV_X(x, 5, 2) << 6)) +#define RVC_LWSP_IMM(x) ((RV_X(x, 4, 3) << 2) | (RV_X(x, 12, 1) << 5) | (RV_X(x, 2, 2) << 6)) +#define RVC_LDSP_IMM(x) ((RV_X(x, 5, 2) << 3) | (RV_X(x, 12, 1) << 5) | (RV_X(x, 2, 3) << 6)) +#define RVC_SWSP_IMM(x) ((RV_X(x, 9, 4) << 2) | (RV_X(x, 7, 2) << 6)) +#define RVC_SDSP_IMM(x) ((RV_X(x, 10, 3) << 3) | (RV_X(x, 7, 3) << 6)) +#define RVC_RS1S(insn) (8 + RV_X(insn, SH_RD, 3)) +#define RVC_RS2S(insn) (8 + RV_X(insn, SH_RS2C, 3)) +#define RVC_RS2(insn) RV_X(insn, SH_RS2C, 5) + +#define SHIFT_RIGHT(x, y) ((y) < 0 ? ((x) << -(y)) : ((x) >> (y))) +#define GET_REG(insn, pos, regs) ({ \ + int mask = (1 << (5+LOG_REGBYTES)) - (1 << LOG_REGBYTES); \ + (uintptr_t*)((uintptr_t)regs + (SHIFT_RIGHT(insn, (pos) - LOG_REGBYTES) & (mask))); \ +}) +#define GET_RS1(insn, regs) (*GET_REG(insn, SH_RS1, regs)) +#define GET_RS2(insn, regs) (*GET_REG(insn, SH_RS2, regs)) +#define GET_RS1S(insn, regs) (*GET_REG(RVC_RS1S(insn), 0, regs)) +#define GET_RS2S(insn, regs) (*GET_REG(RVC_RS2S(insn), 0, regs)) +#define GET_RS2C(insn, regs) (*GET_REG(insn, SH_RS2C, regs)) +#define GET_SP(regs) (*GET_REG(2, 0, regs)) +#define SET_RD(insn, regs, val) (*GET_REG(insn, SH_RD, regs) = (val)) +#define IMM_I(insn) ((int32_t)(insn) >> 20) +#define IMM_S(insn) (((int32_t)(insn) >> 25 << 5) | (int32_t)(((insn) >> 7) & 0x1f)) +#define MASK_FUNCT3 0x7000 + +#endif diff --git a/riscv-pk/machine/encoding.h b/riscv-pk/machine/encoding.h new file mode 100644 index 0000000..c109ce1 --- /dev/null +++ b/riscv-pk/machine/encoding.h @@ -0,0 +1,1471 @@ +// See LICENSE for license details. + +#ifndef RISCV_CSR_ENCODING_H +#define RISCV_CSR_ENCODING_H + +#define MSTATUS_UIE 0x00000001 +#define MSTATUS_SIE 0x00000002 +#define MSTATUS_HIE 0x00000004 +#define MSTATUS_MIE 0x00000008 +#define MSTATUS_UPIE 0x00000010 +#define MSTATUS_SPIE 0x00000020 +#define MSTATUS_HPIE 0x00000040 +#define MSTATUS_MPIE 0x00000080 +#define MSTATUS_SPP 0x00000100 +#define MSTATUS_HPP 0x00000600 +#define MSTATUS_MPP 0x00001800 +#define MSTATUS_FS 0x00006000 +#define MSTATUS_XS 0x00018000 +#define MSTATUS_MPRV 0x00020000 +#define MSTATUS_SUM 0x00040000 +#define MSTATUS_MXR 0x00080000 +#define MSTATUS_TVM 0x00100000 +#define MSTATUS_TW 0x00200000 +#define MSTATUS_TSR 0x00400000 +#define MSTATUS32_SD 0x80000000 +#define MSTATUS_UXL 0x0000000300000000 +#define MSTATUS_SXL 0x0000000C00000000 +#define MSTATUS64_SD 0x8000000000000000 + +#define SSTATUS_UIE 0x00000001 +#define SSTATUS_SIE 0x00000002 +#define SSTATUS_UPIE 0x00000010 +#define SSTATUS_SPIE 0x00000020 +#define SSTATUS_SPP 0x00000100 +#define SSTATUS_FS 0x00006000 +#define SSTATUS_XS 0x00018000 +#define SSTATUS_SUM 0x00040000 +#define SSTATUS_MXR 0x00080000 +#define SSTATUS32_SD 0x80000000 +#define SSTATUS_UXL 0x0000000300000000 +#define SSTATUS64_SD 0x8000000000000000 + +#define DCSR_XDEBUGVER (3U<<30) +#define DCSR_NDRESET (1<<29) +#define DCSR_FULLRESET (1<<28) +#define DCSR_EBREAKM (1<<15) +#define DCSR_EBREAKH (1<<14) +#define DCSR_EBREAKS (1<<13) +#define DCSR_EBREAKU (1<<12) +#define DCSR_STOPCYCLE (1<<10) +#define DCSR_STOPTIME (1<<9) +#define DCSR_CAUSE (7<<6) +#define DCSR_DEBUGINT (1<<5) +#define DCSR_HALT (1<<3) +#define DCSR_STEP (1<<2) +#define DCSR_PRV (3<<0) + +#define DCSR_CAUSE_NONE 0 +#define DCSR_CAUSE_SWBP 1 +#define DCSR_CAUSE_HWBP 2 +#define DCSR_CAUSE_DEBUGINT 3 +#define DCSR_CAUSE_STEP 4 +#define DCSR_CAUSE_HALT 5 + +#define MCONTROL_TYPE(xlen) (0xfULL<<((xlen)-4)) +#define MCONTROL_DMODE(xlen) (1ULL<<((xlen)-5)) +#define MCONTROL_MASKMAX(xlen) (0x3fULL<<((xlen)-11)) + +#define MCONTROL_SELECT (1<<19) +#define MCONTROL_TIMING (1<<18) +#define MCONTROL_ACTION (0x3f<<12) +#define MCONTROL_CHAIN (1<<11) +#define MCONTROL_MATCH (0xf<<7) +#define MCONTROL_M (1<<6) +#define MCONTROL_H (1<<5) +#define MCONTROL_S (1<<4) +#define MCONTROL_U (1<<3) +#define MCONTROL_EXECUTE (1<<2) +#define MCONTROL_STORE (1<<1) +#define MCONTROL_LOAD (1<<0) + +#define MCONTROL_TYPE_NONE 0 +#define MCONTROL_TYPE_MATCH 2 + +#define MCONTROL_ACTION_DEBUG_EXCEPTION 0 +#define MCONTROL_ACTION_DEBUG_MODE 1 +#define MCONTROL_ACTION_TRACE_START 2 +#define MCONTROL_ACTION_TRACE_STOP 3 +#define MCONTROL_ACTION_TRACE_EMIT 4 + +#define MCONTROL_MATCH_EQUAL 0 +#define MCONTROL_MATCH_NAPOT 1 +#define MCONTROL_MATCH_GE 2 +#define MCONTROL_MATCH_LT 3 +#define MCONTROL_MATCH_MASK_LOW 4 +#define MCONTROL_MATCH_MASK_HIGH 5 + +#define MIP_SSIP (1 << IRQ_S_SOFT) +#define MIP_HSIP (1 << IRQ_H_SOFT) +#define MIP_MSIP (1 << IRQ_M_SOFT) +#define MIP_STIP (1 << IRQ_S_TIMER) +#define MIP_HTIP (1 << IRQ_H_TIMER) +#define MIP_MTIP (1 << IRQ_M_TIMER) +#define MIP_SEIP (1 << IRQ_S_EXT) +#define MIP_HEIP (1 << IRQ_H_EXT) +#define MIP_MEIP (1 << IRQ_M_EXT) + +#define SIP_SSIP MIP_SSIP +#define SIP_STIP MIP_STIP + +#define PRV_U 0 +#define PRV_S 1 +#define PRV_H 2 +#define PRV_M 3 + +#define SATP32_MODE 0x80000000 +#define SATP32_ASID 0x7FC00000 +#define SATP32_PPN 0x003FFFFF +#define SATP64_MODE 0xF000000000000000 +#define SATP64_ASID 0x0FFFF00000000000 +#define SATP64_PPN 0x00000FFFFFFFFFFF + +#define SATP_MODE_OFF 0 +#define SATP_MODE_SV32 1 +#define SATP_MODE_SV39 8 +#define SATP_MODE_SV48 9 +#define SATP_MODE_SV57 10 +#define SATP_MODE_SV64 11 + +#define PMP_R 0x01 +#define PMP_W 0x02 +#define PMP_X 0x04 +#define PMP_A 0x18 +#define PMP_L 0x80 +#define PMP_SHIFT 2 + +#define PMP_TOR 0x08 +#define PMP_NA4 0x10 +#define PMP_NAPOT 0x18 + +#define IRQ_S_SOFT 1 +#define IRQ_H_SOFT 2 +#define IRQ_M_SOFT 3 +#define IRQ_S_TIMER 5 +#define IRQ_H_TIMER 6 +#define IRQ_M_TIMER 7 +#define IRQ_S_EXT 9 +#define IRQ_H_EXT 10 +#define IRQ_M_EXT 11 +#define IRQ_COP 12 +#define IRQ_HOST 13 + +#define DEFAULT_RSTVEC 0x00001000 +#define CLINT_BASE 0x02000000 +#define CLINT_SIZE 0x000c0000 +#define EXT_IO_BASE 0x40000000 +#define DRAM_BASE 0x80000000 + +// page table entry (PTE) fields +#define PTE_V 0x001 // Valid +#define PTE_R 0x002 // Read +#define PTE_W 0x004 // Write +#define PTE_X 0x008 // Execute +#define PTE_U 0x010 // User +#define PTE_G 0x020 // Global +#define PTE_A 0x040 // Accessed +#define PTE_D 0x080 // Dirty +#define PTE_SOFT 0x300 // Reserved for Software + +#define PTE_PPN_SHIFT 10 + +#define PTE_TABLE(PTE) (((PTE) & (PTE_V | PTE_R | PTE_W | PTE_X)) == PTE_V) + +#ifdef __riscv + +#if __riscv_xlen == 64 +# define MSTATUS_SD MSTATUS64_SD +# define SSTATUS_SD SSTATUS64_SD +# define RISCV_PGLEVEL_BITS 9 +# define SATP_MODE SATP64_MODE +#else +# define MSTATUS_SD MSTATUS32_SD +# define SSTATUS_SD SSTATUS32_SD +# define RISCV_PGLEVEL_BITS 10 +# define SATP_MODE SATP32_MODE +#endif +#define RISCV_PGSHIFT 12 +#define RISCV_PGSIZE (1 << RISCV_PGSHIFT) + +#ifndef __ASSEMBLER__ + +#ifdef __GNUC__ + +#define read_csr(reg) ({ unsigned long __tmp; \ + asm volatile ("csrr %0, " #reg : "=r"(__tmp)); \ + __tmp; }) + +#define write_csr(reg, val) ({ \ + asm volatile ("csrw " #reg ", %0" :: "rK"(val)); }) + +#define swap_csr(reg, val) ({ unsigned long __tmp; \ + asm volatile ("csrrw %0, " #reg ", %1" : "=r"(__tmp) : "rK"(val)); \ + __tmp; }) + +#define set_csr(reg, bit) ({ unsigned long __tmp; \ + asm volatile ("csrrs %0, " #reg ", %1" : "=r"(__tmp) : "rK"(bit)); \ + __tmp; }) + +#define clear_csr(reg, bit) ({ unsigned long __tmp; \ + asm volatile ("csrrc %0, " #reg ", %1" : "=r"(__tmp) : "rK"(bit)); \ + __tmp; }) + +#define rdtime() read_csr(time) +#define rdcycle() read_csr(cycle) +#define rdinstret() read_csr(instret) + +#endif + +#endif + +#endif + +#endif +/* Automatically generated by parse-opcodes. */ +#ifndef RISCV_ENCODING_H +#define RISCV_ENCODING_H +#define MATCH_BEQ 0x63 +#define MASK_BEQ 0x707f +#define MATCH_BNE 0x1063 +#define MASK_BNE 0x707f +#define MATCH_BLT 0x4063 +#define MASK_BLT 0x707f +#define MATCH_BGE 0x5063 +#define MASK_BGE 0x707f +#define MATCH_BLTU 0x6063 +#define MASK_BLTU 0x707f +#define MATCH_BGEU 0x7063 +#define MASK_BGEU 0x707f +#define MATCH_JALR 0x67 +#define MASK_JALR 0x707f +#define MATCH_JAL 0x6f +#define MASK_JAL 0x7f +#define MATCH_LUI 0x37 +#define MASK_LUI 0x7f +#define MATCH_AUIPC 0x17 +#define MASK_AUIPC 0x7f +#define MATCH_ADDI 0x13 +#define MASK_ADDI 0x707f +#define MATCH_SLLI 0x1013 +#define MASK_SLLI 0xfc00707f +#define MATCH_SLTI 0x2013 +#define MASK_SLTI 0x707f +#define MATCH_SLTIU 0x3013 +#define MASK_SLTIU 0x707f +#define MATCH_XORI 0x4013 +#define MASK_XORI 0x707f +#define MATCH_SRLI 0x5013 +#define MASK_SRLI 0xfc00707f +#define MATCH_SRAI 0x40005013 +#define MASK_SRAI 0xfc00707f +#define MATCH_ORI 0x6013 +#define MASK_ORI 0x707f +#define MATCH_ANDI 0x7013 +#define MASK_ANDI 0x707f +#define MATCH_ADD 0x33 +#define MASK_ADD 0xfe00707f +#define MATCH_SUB 0x40000033 +#define MASK_SUB 0xfe00707f +#define MATCH_SLL 0x1033 +#define MASK_SLL 0xfe00707f +#define MATCH_SLT 0x2033 +#define MASK_SLT 0xfe00707f +#define MATCH_SLTU 0x3033 +#define MASK_SLTU 0xfe00707f +#define MATCH_XOR 0x4033 +#define MASK_XOR 0xfe00707f +#define MATCH_SRL 0x5033 +#define MASK_SRL 0xfe00707f +#define MATCH_SRA 0x40005033 +#define MASK_SRA 0xfe00707f +#define MATCH_OR 0x6033 +#define MASK_OR 0xfe00707f +#define MATCH_AND 0x7033 +#define MASK_AND 0xfe00707f +#define MATCH_ADDIW 0x1b +#define MASK_ADDIW 0x707f +#define MATCH_SLLIW 0x101b +#define MASK_SLLIW 0xfe00707f +#define MATCH_SRLIW 0x501b +#define MASK_SRLIW 0xfe00707f +#define MATCH_SRAIW 0x4000501b +#define MASK_SRAIW 0xfe00707f +#define MATCH_ADDW 0x3b +#define MASK_ADDW 0xfe00707f +#define MATCH_SUBW 0x4000003b +#define MASK_SUBW 0xfe00707f +#define MATCH_SLLW 0x103b +#define MASK_SLLW 0xfe00707f +#define MATCH_SRLW 0x503b +#define MASK_SRLW 0xfe00707f +#define MATCH_SRAW 0x4000503b +#define MASK_SRAW 0xfe00707f +#define MATCH_LB 0x3 +#define MASK_LB 0x707f +#define MATCH_LH 0x1003 +#define MASK_LH 0x707f +#define MATCH_LW 0x2003 +#define MASK_LW 0x707f +#define MATCH_LD 0x3003 +#define MASK_LD 0x707f +#define MATCH_LBU 0x4003 +#define MASK_LBU 0x707f +#define MATCH_LHU 0x5003 +#define MASK_LHU 0x707f +#define MATCH_LWU 0x6003 +#define MASK_LWU 0x707f +#define MATCH_SB 0x23 +#define MASK_SB 0x707f +#define MATCH_SH 0x1023 +#define MASK_SH 0x707f +#define MATCH_SW 0x2023 +#define MASK_SW 0x707f +#define MATCH_SD 0x3023 +#define MASK_SD 0x707f +#define MATCH_FENCE 0xf +#define MASK_FENCE 0x707f +#define MATCH_FENCE_I 0x100f +#define MASK_FENCE_I 0x707f +#define MATCH_MUL 0x2000033 +#define MASK_MUL 0xfe00707f +#define MATCH_MULH 0x2001033 +#define MASK_MULH 0xfe00707f +#define MATCH_MULHSU 0x2002033 +#define MASK_MULHSU 0xfe00707f +#define MATCH_MULHU 0x2003033 +#define MASK_MULHU 0xfe00707f +#define MATCH_DIV 0x2004033 +#define MASK_DIV 0xfe00707f +#define MATCH_DIVU 0x2005033 +#define MASK_DIVU 0xfe00707f +#define MATCH_REM 0x2006033 +#define MASK_REM 0xfe00707f +#define MATCH_REMU 0x2007033 +#define MASK_REMU 0xfe00707f +#define MATCH_MULW 0x200003b +#define MASK_MULW 0xfe00707f +#define MATCH_DIVW 0x200403b +#define MASK_DIVW 0xfe00707f +#define MATCH_DIVUW 0x200503b +#define MASK_DIVUW 0xfe00707f +#define MATCH_REMW 0x200603b +#define MASK_REMW 0xfe00707f +#define MATCH_REMUW 0x200703b +#define MASK_REMUW 0xfe00707f +#define MATCH_AMOADD_W 0x202f +#define MASK_AMOADD_W 0xf800707f +#define MATCH_AMOXOR_W 0x2000202f +#define MASK_AMOXOR_W 0xf800707f +#define MATCH_AMOOR_W 0x4000202f +#define MASK_AMOOR_W 0xf800707f +#define MATCH_AMOAND_W 0x6000202f +#define MASK_AMOAND_W 0xf800707f +#define MATCH_AMOMIN_W 0x8000202f +#define MASK_AMOMIN_W 0xf800707f +#define MATCH_AMOMAX_W 0xa000202f +#define MASK_AMOMAX_W 0xf800707f +#define MATCH_AMOMINU_W 0xc000202f +#define MASK_AMOMINU_W 0xf800707f +#define MATCH_AMOMAXU_W 0xe000202f +#define MASK_AMOMAXU_W 0xf800707f +#define MATCH_AMOSWAP_W 0x800202f +#define MASK_AMOSWAP_W 0xf800707f +#define MATCH_LR_W 0x1000202f +#define MASK_LR_W 0xf9f0707f +#define MATCH_SC_W 0x1800202f +#define MASK_SC_W 0xf800707f +#define MATCH_AMOADD_D 0x302f +#define MASK_AMOADD_D 0xf800707f +#define MATCH_AMOXOR_D 0x2000302f +#define MASK_AMOXOR_D 0xf800707f +#define MATCH_AMOOR_D 0x4000302f +#define MASK_AMOOR_D 0xf800707f +#define MATCH_AMOAND_D 0x6000302f +#define MASK_AMOAND_D 0xf800707f +#define MATCH_AMOMIN_D 0x8000302f +#define MASK_AMOMIN_D 0xf800707f +#define MATCH_AMOMAX_D 0xa000302f +#define MASK_AMOMAX_D 0xf800707f +#define MATCH_AMOMINU_D 0xc000302f +#define MASK_AMOMINU_D 0xf800707f +#define MATCH_AMOMAXU_D 0xe000302f +#define MASK_AMOMAXU_D 0xf800707f +#define MATCH_AMOSWAP_D 0x800302f +#define MASK_AMOSWAP_D 0xf800707f +#define MATCH_LR_D 0x1000302f +#define MASK_LR_D 0xf9f0707f +#define MATCH_SC_D 0x1800302f +#define MASK_SC_D 0xf800707f +#define MATCH_ECALL 0x73 +#define MASK_ECALL 0xffffffff +#define MATCH_EBREAK 0x100073 +#define MASK_EBREAK 0xffffffff +#define MATCH_URET 0x200073 +#define MASK_URET 0xffffffff +#define MATCH_SRET 0x10200073 +#define MASK_SRET 0xffffffff +#define MATCH_MRET 0x30200073 +#define MASK_MRET 0xffffffff +#define MATCH_DRET 0x7b200073 +#define MASK_DRET 0xffffffff +#define MATCH_SFENCE_VMA 0x12000073 +#define MASK_SFENCE_VMA 0xfe007fff +#define MATCH_WFI 0x10500073 +#define MASK_WFI 0xffffffff +#define MATCH_CSRRW 0x1073 +#define MASK_CSRRW 0x707f +#define MATCH_CSRRS 0x2073 +#define MASK_CSRRS 0x707f +#define MATCH_CSRRC 0x3073 +#define MASK_CSRRC 0x707f +#define MATCH_CSRRWI 0x5073 +#define MASK_CSRRWI 0x707f +#define MATCH_CSRRSI 0x6073 +#define MASK_CSRRSI 0x707f +#define MATCH_CSRRCI 0x7073 +#define MASK_CSRRCI 0x707f +#define MATCH_FADD_S 0x53 +#define MASK_FADD_S 0xfe00007f +#define MATCH_FSUB_S 0x8000053 +#define MASK_FSUB_S 0xfe00007f +#define MATCH_FMUL_S 0x10000053 +#define MASK_FMUL_S 0xfe00007f +#define MATCH_FDIV_S 0x18000053 +#define MASK_FDIV_S 0xfe00007f +#define MATCH_FSGNJ_S 0x20000053 +#define MASK_FSGNJ_S 0xfe00707f +#define MATCH_FSGNJN_S 0x20001053 +#define MASK_FSGNJN_S 0xfe00707f +#define MATCH_FSGNJX_S 0x20002053 +#define MASK_FSGNJX_S 0xfe00707f +#define MATCH_FMIN_S 0x28000053 +#define MASK_FMIN_S 0xfe00707f +#define MATCH_FMAX_S 0x28001053 +#define MASK_FMAX_S 0xfe00707f +#define MATCH_FSQRT_S 0x58000053 +#define MASK_FSQRT_S 0xfff0007f +#define MATCH_FADD_D 0x2000053 +#define MASK_FADD_D 0xfe00007f +#define MATCH_FSUB_D 0xa000053 +#define MASK_FSUB_D 0xfe00007f +#define MATCH_FMUL_D 0x12000053 +#define MASK_FMUL_D 0xfe00007f +#define MATCH_FDIV_D 0x1a000053 +#define MASK_FDIV_D 0xfe00007f +#define MATCH_FSGNJ_D 0x22000053 +#define MASK_FSGNJ_D 0xfe00707f +#define MATCH_FSGNJN_D 0x22001053 +#define MASK_FSGNJN_D 0xfe00707f +#define MATCH_FSGNJX_D 0x22002053 +#define MASK_FSGNJX_D 0xfe00707f +#define MATCH_FMIN_D 0x2a000053 +#define MASK_FMIN_D 0xfe00707f +#define MATCH_FMAX_D 0x2a001053 +#define MASK_FMAX_D 0xfe00707f +#define MATCH_FCVT_S_D 0x40100053 +#define MASK_FCVT_S_D 0xfff0007f +#define MATCH_FCVT_D_S 0x42000053 +#define MASK_FCVT_D_S 0xfff0007f +#define MATCH_FSQRT_D 0x5a000053 +#define MASK_FSQRT_D 0xfff0007f +#define MATCH_FADD_Q 0x6000053 +#define MASK_FADD_Q 0xfe00007f +#define MATCH_FSUB_Q 0xe000053 +#define MASK_FSUB_Q 0xfe00007f +#define MATCH_FMUL_Q 0x16000053 +#define MASK_FMUL_Q 0xfe00007f +#define MATCH_FDIV_Q 0x1e000053 +#define MASK_FDIV_Q 0xfe00007f +#define MATCH_FSGNJ_Q 0x26000053 +#define MASK_FSGNJ_Q 0xfe00707f +#define MATCH_FSGNJN_Q 0x26001053 +#define MASK_FSGNJN_Q 0xfe00707f +#define MATCH_FSGNJX_Q 0x26002053 +#define MASK_FSGNJX_Q 0xfe00707f +#define MATCH_FMIN_Q 0x2e000053 +#define MASK_FMIN_Q 0xfe00707f +#define MATCH_FMAX_Q 0x2e001053 +#define MASK_FMAX_Q 0xfe00707f +#define MATCH_FCVT_S_Q 0x40300053 +#define MASK_FCVT_S_Q 0xfff0007f +#define MATCH_FCVT_Q_S 0x46000053 +#define MASK_FCVT_Q_S 0xfff0007f +#define MATCH_FCVT_D_Q 0x42300053 +#define MASK_FCVT_D_Q 0xfff0007f +#define MATCH_FCVT_Q_D 0x46100053 +#define MASK_FCVT_Q_D 0xfff0007f +#define MATCH_FSQRT_Q 0x5e000053 +#define MASK_FSQRT_Q 0xfff0007f +#define MATCH_FLE_S 0xa0000053 +#define MASK_FLE_S 0xfe00707f +#define MATCH_FLT_S 0xa0001053 +#define MASK_FLT_S 0xfe00707f +#define MATCH_FEQ_S 0xa0002053 +#define MASK_FEQ_S 0xfe00707f +#define MATCH_FLE_D 0xa2000053 +#define MASK_FLE_D 0xfe00707f +#define MATCH_FLT_D 0xa2001053 +#define MASK_FLT_D 0xfe00707f +#define MATCH_FEQ_D 0xa2002053 +#define MASK_FEQ_D 0xfe00707f +#define MATCH_FLE_Q 0xa6000053 +#define MASK_FLE_Q 0xfe00707f +#define MATCH_FLT_Q 0xa6001053 +#define MASK_FLT_Q 0xfe00707f +#define MATCH_FEQ_Q 0xa6002053 +#define MASK_FEQ_Q 0xfe00707f +#define MATCH_FCVT_W_S 0xc0000053 +#define MASK_FCVT_W_S 0xfff0007f +#define MATCH_FCVT_WU_S 0xc0100053 +#define MASK_FCVT_WU_S 0xfff0007f +#define MATCH_FCVT_L_S 0xc0200053 +#define MASK_FCVT_L_S 0xfff0007f +#define MATCH_FCVT_LU_S 0xc0300053 +#define MASK_FCVT_LU_S 0xfff0007f +#define MATCH_FMV_X_W 0xe0000053 +#define MASK_FMV_X_W 0xfff0707f +#define MATCH_FCLASS_S 0xe0001053 +#define MASK_FCLASS_S 0xfff0707f +#define MATCH_FCVT_W_D 0xc2000053 +#define MASK_FCVT_W_D 0xfff0007f +#define MATCH_FCVT_WU_D 0xc2100053 +#define MASK_FCVT_WU_D 0xfff0007f +#define MATCH_FCVT_L_D 0xc2200053 +#define MASK_FCVT_L_D 0xfff0007f +#define MATCH_FCVT_LU_D 0xc2300053 +#define MASK_FCVT_LU_D 0xfff0007f +#define MATCH_FMV_X_D 0xe2000053 +#define MASK_FMV_X_D 0xfff0707f +#define MATCH_FCLASS_D 0xe2001053 +#define MASK_FCLASS_D 0xfff0707f +#define MATCH_FCVT_W_Q 0xc6000053 +#define MASK_FCVT_W_Q 0xfff0007f +#define MATCH_FCVT_WU_Q 0xc6100053 +#define MASK_FCVT_WU_Q 0xfff0007f +#define MATCH_FCVT_L_Q 0xc6200053 +#define MASK_FCVT_L_Q 0xfff0007f +#define MATCH_FCVT_LU_Q 0xc6300053 +#define MASK_FCVT_LU_Q 0xfff0007f +#define MATCH_FMV_X_Q 0xe6000053 +#define MASK_FMV_X_Q 0xfff0707f +#define MATCH_FCLASS_Q 0xe6001053 +#define MASK_FCLASS_Q 0xfff0707f +#define MATCH_FCVT_S_W 0xd0000053 +#define MASK_FCVT_S_W 0xfff0007f +#define MATCH_FCVT_S_WU 0xd0100053 +#define MASK_FCVT_S_WU 0xfff0007f +#define MATCH_FCVT_S_L 0xd0200053 +#define MASK_FCVT_S_L 0xfff0007f +#define MATCH_FCVT_S_LU 0xd0300053 +#define MASK_FCVT_S_LU 0xfff0007f +#define MATCH_FMV_W_X 0xf0000053 +#define MASK_FMV_W_X 0xfff0707f +#define MATCH_FCVT_D_W 0xd2000053 +#define MASK_FCVT_D_W 0xfff0007f +#define MATCH_FCVT_D_WU 0xd2100053 +#define MASK_FCVT_D_WU 0xfff0007f +#define MATCH_FCVT_D_L 0xd2200053 +#define MASK_FCVT_D_L 0xfff0007f +#define MATCH_FCVT_D_LU 0xd2300053 +#define MASK_FCVT_D_LU 0xfff0007f +#define MATCH_FMV_D_X 0xf2000053 +#define MASK_FMV_D_X 0xfff0707f +#define MATCH_FCVT_Q_W 0xd6000053 +#define MASK_FCVT_Q_W 0xfff0007f +#define MATCH_FCVT_Q_WU 0xd6100053 +#define MASK_FCVT_Q_WU 0xfff0007f +#define MATCH_FCVT_Q_L 0xd6200053 +#define MASK_FCVT_Q_L 0xfff0007f +#define MATCH_FCVT_Q_LU 0xd6300053 +#define MASK_FCVT_Q_LU 0xfff0007f +#define MATCH_FMV_Q_X 0xf6000053 +#define MASK_FMV_Q_X 0xfff0707f +#define MATCH_FLW 0x2007 +#define MASK_FLW 0x707f +#define MATCH_FLD 0x3007 +#define MASK_FLD 0x707f +#define MATCH_FLQ 0x4007 +#define MASK_FLQ 0x707f +#define MATCH_FSW 0x2027 +#define MASK_FSW 0x707f +#define MATCH_FSD 0x3027 +#define MASK_FSD 0x707f +#define MATCH_FSQ 0x4027 +#define MASK_FSQ 0x707f +#define MATCH_FMADD_S 0x43 +#define MASK_FMADD_S 0x600007f +#define MATCH_FMSUB_S 0x47 +#define MASK_FMSUB_S 0x600007f +#define MATCH_FNMSUB_S 0x4b +#define MASK_FNMSUB_S 0x600007f +#define MATCH_FNMADD_S 0x4f +#define MASK_FNMADD_S 0x600007f +#define MATCH_FMADD_D 0x2000043 +#define MASK_FMADD_D 0x600007f +#define MATCH_FMSUB_D 0x2000047 +#define MASK_FMSUB_D 0x600007f +#define MATCH_FNMSUB_D 0x200004b +#define MASK_FNMSUB_D 0x600007f +#define MATCH_FNMADD_D 0x200004f +#define MASK_FNMADD_D 0x600007f +#define MATCH_FMADD_Q 0x6000043 +#define MASK_FMADD_Q 0x600007f +#define MATCH_FMSUB_Q 0x6000047 +#define MASK_FMSUB_Q 0x600007f +#define MATCH_FNMSUB_Q 0x600004b +#define MASK_FNMSUB_Q 0x600007f +#define MATCH_FNMADD_Q 0x600004f +#define MASK_FNMADD_Q 0x600007f +#define MATCH_C_NOP 0x1 +#define MASK_C_NOP 0xffff +#define MATCH_C_ADDI16SP 0x6101 +#define MASK_C_ADDI16SP 0xef83 +#define MATCH_C_JR 0x8002 +#define MASK_C_JR 0xf07f +#define MATCH_C_JALR 0x9002 +#define MASK_C_JALR 0xf07f +#define MATCH_C_EBREAK 0x9002 +#define MASK_C_EBREAK 0xffff +#define MATCH_C_LD 0x6000 +#define MASK_C_LD 0xe003 +#define MATCH_C_SD 0xe000 +#define MASK_C_SD 0xe003 +#define MATCH_C_ADDIW 0x2001 +#define MASK_C_ADDIW 0xe003 +#define MATCH_C_LDSP 0x6002 +#define MASK_C_LDSP 0xe003 +#define MATCH_C_SDSP 0xe002 +#define MASK_C_SDSP 0xe003 +#define MATCH_C_ADDI4SPN 0x0 +#define MASK_C_ADDI4SPN 0xe003 +#define MATCH_C_FLD 0x2000 +#define MASK_C_FLD 0xe003 +#define MATCH_C_LW 0x4000 +#define MASK_C_LW 0xe003 +#define MATCH_C_FLW 0x6000 +#define MASK_C_FLW 0xe003 +#define MATCH_C_FSD 0xa000 +#define MASK_C_FSD 0xe003 +#define MATCH_C_SW 0xc000 +#define MASK_C_SW 0xe003 +#define MATCH_C_FSW 0xe000 +#define MASK_C_FSW 0xe003 +#define MATCH_C_ADDI 0x1 +#define MASK_C_ADDI 0xe003 +#define MATCH_C_JAL 0x2001 +#define MASK_C_JAL 0xe003 +#define MATCH_C_LI 0x4001 +#define MASK_C_LI 0xe003 +#define MATCH_C_LUI 0x6001 +#define MASK_C_LUI 0xe003 +#define MATCH_C_SRLI 0x8001 +#define MASK_C_SRLI 0xec03 +#define MATCH_C_SRAI 0x8401 +#define MASK_C_SRAI 0xec03 +#define MATCH_C_ANDI 0x8801 +#define MASK_C_ANDI 0xec03 +#define MATCH_C_SUB 0x8c01 +#define MASK_C_SUB 0xfc63 +#define MATCH_C_XOR 0x8c21 +#define MASK_C_XOR 0xfc63 +#define MATCH_C_OR 0x8c41 +#define MASK_C_OR 0xfc63 +#define MATCH_C_AND 0x8c61 +#define MASK_C_AND 0xfc63 +#define MATCH_C_SUBW 0x9c01 +#define MASK_C_SUBW 0xfc63 +#define MATCH_C_ADDW 0x9c21 +#define MASK_C_ADDW 0xfc63 +#define MATCH_C_J 0xa001 +#define MASK_C_J 0xe003 +#define MATCH_C_BEQZ 0xc001 +#define MASK_C_BEQZ 0xe003 +#define MATCH_C_BNEZ 0xe001 +#define MASK_C_BNEZ 0xe003 +#define MATCH_C_SLLI 0x2 +#define MASK_C_SLLI 0xe003 +#define MATCH_C_FLDSP 0x2002 +#define MASK_C_FLDSP 0xe003 +#define MATCH_C_LWSP 0x4002 +#define MASK_C_LWSP 0xe003 +#define MATCH_C_FLWSP 0x6002 +#define MASK_C_FLWSP 0xe003 +#define MATCH_C_MV 0x8002 +#define MASK_C_MV 0xf003 +#define MATCH_C_ADD 0x9002 +#define MASK_C_ADD 0xf003 +#define MATCH_C_FSDSP 0xa002 +#define MASK_C_FSDSP 0xe003 +#define MATCH_C_SWSP 0xc002 +#define MASK_C_SWSP 0xe003 +#define MATCH_C_FSWSP 0xe002 +#define MASK_C_FSWSP 0xe003 +#define MATCH_CUSTOM0 0xb +#define MASK_CUSTOM0 0x707f +#define MATCH_CUSTOM0_RS1 0x200b +#define MASK_CUSTOM0_RS1 0x707f +#define MATCH_CUSTOM0_RS1_RS2 0x300b +#define MASK_CUSTOM0_RS1_RS2 0x707f +#define MATCH_CUSTOM0_RD 0x400b +#define MASK_CUSTOM0_RD 0x707f +#define MATCH_CUSTOM0_RD_RS1 0x600b +#define MASK_CUSTOM0_RD_RS1 0x707f +#define MATCH_CUSTOM0_RD_RS1_RS2 0x700b +#define MASK_CUSTOM0_RD_RS1_RS2 0x707f +#define MATCH_CUSTOM1 0x2b +#define MASK_CUSTOM1 0x707f +#define MATCH_CUSTOM1_RS1 0x202b +#define MASK_CUSTOM1_RS1 0x707f +#define MATCH_CUSTOM1_RS1_RS2 0x302b +#define MASK_CUSTOM1_RS1_RS2 0x707f +#define MATCH_CUSTOM1_RD 0x402b +#define MASK_CUSTOM1_RD 0x707f +#define MATCH_CUSTOM1_RD_RS1 0x602b +#define MASK_CUSTOM1_RD_RS1 0x707f +#define MATCH_CUSTOM1_RD_RS1_RS2 0x702b +#define MASK_CUSTOM1_RD_RS1_RS2 0x707f +#define MATCH_CUSTOM2 0x5b +#define MASK_CUSTOM2 0x707f +#define MATCH_CUSTOM2_RS1 0x205b +#define MASK_CUSTOM2_RS1 0x707f +#define MATCH_CUSTOM2_RS1_RS2 0x305b +#define MASK_CUSTOM2_RS1_RS2 0x707f +#define MATCH_CUSTOM2_RD 0x405b +#define MASK_CUSTOM2_RD 0x707f +#define MATCH_CUSTOM2_RD_RS1 0x605b +#define MASK_CUSTOM2_RD_RS1 0x707f +#define MATCH_CUSTOM2_RD_RS1_RS2 0x705b +#define MASK_CUSTOM2_RD_RS1_RS2 0x707f +#define MATCH_CUSTOM3 0x7b +#define MASK_CUSTOM3 0x707f +#define MATCH_CUSTOM3_RS1 0x207b +#define MASK_CUSTOM3_RS1 0x707f +#define MATCH_CUSTOM3_RS1_RS2 0x307b +#define MASK_CUSTOM3_RS1_RS2 0x707f +#define MATCH_CUSTOM3_RD 0x407b +#define MASK_CUSTOM3_RD 0x707f +#define MATCH_CUSTOM3_RD_RS1 0x607b +#define MASK_CUSTOM3_RD_RS1 0x707f +#define MATCH_CUSTOM3_RD_RS1_RS2 0x707b +#define MASK_CUSTOM3_RD_RS1_RS2 0x707f +#define CSR_FFLAGS 0x1 +#define CSR_FRM 0x2 +#define CSR_FCSR 0x3 +#define CSR_CYCLE 0xc00 +#define CSR_TIME 0xc01 +#define CSR_INSTRET 0xc02 +#define CSR_HPMCOUNTER3 0xc03 +#define CSR_HPMCOUNTER4 0xc04 +#define CSR_HPMCOUNTER5 0xc05 +#define CSR_HPMCOUNTER6 0xc06 +#define CSR_HPMCOUNTER7 0xc07 +#define CSR_HPMCOUNTER8 0xc08 +#define CSR_HPMCOUNTER9 0xc09 +#define CSR_HPMCOUNTER10 0xc0a +#define CSR_HPMCOUNTER11 0xc0b +#define CSR_HPMCOUNTER12 0xc0c +#define CSR_HPMCOUNTER13 0xc0d +#define CSR_HPMCOUNTER14 0xc0e +#define CSR_HPMCOUNTER15 0xc0f +#define CSR_HPMCOUNTER16 0xc10 +#define CSR_HPMCOUNTER17 0xc11 +#define CSR_HPMCOUNTER18 0xc12 +#define CSR_HPMCOUNTER19 0xc13 +#define CSR_HPMCOUNTER20 0xc14 +#define CSR_HPMCOUNTER21 0xc15 +#define CSR_HPMCOUNTER22 0xc16 +#define CSR_HPMCOUNTER23 0xc17 +#define CSR_HPMCOUNTER24 0xc18 +#define CSR_HPMCOUNTER25 0xc19 +#define CSR_HPMCOUNTER26 0xc1a +#define CSR_HPMCOUNTER27 0xc1b +#define CSR_HPMCOUNTER28 0xc1c +#define CSR_HPMCOUNTER29 0xc1d +#define CSR_HPMCOUNTER30 0xc1e +#define CSR_HPMCOUNTER31 0xc1f +#define CSR_SSTATUS 0x100 +#define CSR_SIE 0x104 +#define CSR_STVEC 0x105 +#define CSR_SCOUNTEREN 0x106 +#define CSR_SSCRATCH 0x140 +#define CSR_SEPC 0x141 +#define CSR_SCAUSE 0x142 +#define CSR_STVAL 0x143 +#define CSR_SIP 0x144 +#define CSR_SATP 0x180 +#define CSR_MSTATUS 0x300 +#define CSR_MISA 0x301 +#define CSR_MEDELEG 0x302 +#define CSR_MIDELEG 0x303 +#define CSR_MIE 0x304 +#define CSR_MTVEC 0x305 +#define CSR_MCOUNTEREN 0x306 +#define CSR_MSCRATCH 0x340 +#define CSR_MEPC 0x341 +#define CSR_MCAUSE 0x342 +#define CSR_MTVAL 0x343 +#define CSR_MIP 0x344 +#define CSR_PMPCFG0 0x3a0 +#define CSR_PMPCFG1 0x3a1 +#define CSR_PMPCFG2 0x3a2 +#define CSR_PMPCFG3 0x3a3 +#define CSR_PMPADDR0 0x3b0 +#define CSR_PMPADDR1 0x3b1 +#define CSR_PMPADDR2 0x3b2 +#define CSR_PMPADDR3 0x3b3 +#define CSR_PMPADDR4 0x3b4 +#define CSR_PMPADDR5 0x3b5 +#define CSR_PMPADDR6 0x3b6 +#define CSR_PMPADDR7 0x3b7 +#define CSR_PMPADDR8 0x3b8 +#define CSR_PMPADDR9 0x3b9 +#define CSR_PMPADDR10 0x3ba +#define CSR_PMPADDR11 0x3bb +#define CSR_PMPADDR12 0x3bc +#define CSR_PMPADDR13 0x3bd +#define CSR_PMPADDR14 0x3be +#define CSR_PMPADDR15 0x3bf +#define CSR_TSELECT 0x7a0 +#define CSR_TDATA1 0x7a1 +#define CSR_TDATA2 0x7a2 +#define CSR_TDATA3 0x7a3 +#define CSR_DCSR 0x7b0 +#define CSR_DPC 0x7b1 +#define CSR_DSCRATCH 0x7b2 +#define CSR_MCYCLE 0xb00 +#define CSR_MINSTRET 0xb02 +#define CSR_MHPMCOUNTER3 0xb03 +#define CSR_MHPMCOUNTER4 0xb04 +#define CSR_MHPMCOUNTER5 0xb05 +#define CSR_MHPMCOUNTER6 0xb06 +#define CSR_MHPMCOUNTER7 0xb07 +#define CSR_MHPMCOUNTER8 0xb08 +#define CSR_MHPMCOUNTER9 0xb09 +#define CSR_MHPMCOUNTER10 0xb0a +#define CSR_MHPMCOUNTER11 0xb0b +#define CSR_MHPMCOUNTER12 0xb0c +#define CSR_MHPMCOUNTER13 0xb0d +#define CSR_MHPMCOUNTER14 0xb0e +#define CSR_MHPMCOUNTER15 0xb0f +#define CSR_MHPMCOUNTER16 0xb10 +#define CSR_MHPMCOUNTER17 0xb11 +#define CSR_MHPMCOUNTER18 0xb12 +#define CSR_MHPMCOUNTER19 0xb13 +#define CSR_MHPMCOUNTER20 0xb14 +#define CSR_MHPMCOUNTER21 0xb15 +#define CSR_MHPMCOUNTER22 0xb16 +#define CSR_MHPMCOUNTER23 0xb17 +#define CSR_MHPMCOUNTER24 0xb18 +#define CSR_MHPMCOUNTER25 0xb19 +#define CSR_MHPMCOUNTER26 0xb1a +#define CSR_MHPMCOUNTER27 0xb1b +#define CSR_MHPMCOUNTER28 0xb1c +#define CSR_MHPMCOUNTER29 0xb1d +#define CSR_MHPMCOUNTER30 0xb1e +#define CSR_MHPMCOUNTER31 0xb1f +#define CSR_MHPMEVENT3 0x323 +#define CSR_MHPMEVENT4 0x324 +#define CSR_MHPMEVENT5 0x325 +#define CSR_MHPMEVENT6 0x326 +#define CSR_MHPMEVENT7 0x327 +#define CSR_MHPMEVENT8 0x328 +#define CSR_MHPMEVENT9 0x329 +#define CSR_MHPMEVENT10 0x32a +#define CSR_MHPMEVENT11 0x32b +#define CSR_MHPMEVENT12 0x32c +#define CSR_MHPMEVENT13 0x32d +#define CSR_MHPMEVENT14 0x32e +#define CSR_MHPMEVENT15 0x32f +#define CSR_MHPMEVENT16 0x330 +#define CSR_MHPMEVENT17 0x331 +#define CSR_MHPMEVENT18 0x332 +#define CSR_MHPMEVENT19 0x333 +#define CSR_MHPMEVENT20 0x334 +#define CSR_MHPMEVENT21 0x335 +#define CSR_MHPMEVENT22 0x336 +#define CSR_MHPMEVENT23 0x337 +#define CSR_MHPMEVENT24 0x338 +#define CSR_MHPMEVENT25 0x339 +#define CSR_MHPMEVENT26 0x33a +#define CSR_MHPMEVENT27 0x33b +#define CSR_MHPMEVENT28 0x33c +#define CSR_MHPMEVENT29 0x33d +#define CSR_MHPMEVENT30 0x33e +#define CSR_MHPMEVENT31 0x33f +#define CSR_MVENDORID 0xf11 +#define CSR_MARCHID 0xf12 +#define CSR_MIMPID 0xf13 +#define CSR_MHARTID 0xf14 +#define CSR_CYCLEH 0xc80 +#define CSR_TIMEH 0xc81 +#define CSR_INSTRETH 0xc82 +#define CSR_HPMCOUNTER3H 0xc83 +#define CSR_HPMCOUNTER4H 0xc84 +#define CSR_HPMCOUNTER5H 0xc85 +#define CSR_HPMCOUNTER6H 0xc86 +#define CSR_HPMCOUNTER7H 0xc87 +#define CSR_HPMCOUNTER8H 0xc88 +#define CSR_HPMCOUNTER9H 0xc89 +#define CSR_HPMCOUNTER10H 0xc8a +#define CSR_HPMCOUNTER11H 0xc8b +#define CSR_HPMCOUNTER12H 0xc8c +#define CSR_HPMCOUNTER13H 0xc8d +#define CSR_HPMCOUNTER14H 0xc8e +#define CSR_HPMCOUNTER15H 0xc8f +#define CSR_HPMCOUNTER16H 0xc90 +#define CSR_HPMCOUNTER17H 0xc91 +#define CSR_HPMCOUNTER18H 0xc92 +#define CSR_HPMCOUNTER19H 0xc93 +#define CSR_HPMCOUNTER20H 0xc94 +#define CSR_HPMCOUNTER21H 0xc95 +#define CSR_HPMCOUNTER22H 0xc96 +#define CSR_HPMCOUNTER23H 0xc97 +#define CSR_HPMCOUNTER24H 0xc98 +#define CSR_HPMCOUNTER25H 0xc99 +#define CSR_HPMCOUNTER26H 0xc9a +#define CSR_HPMCOUNTER27H 0xc9b +#define CSR_HPMCOUNTER28H 0xc9c +#define CSR_HPMCOUNTER29H 0xc9d +#define CSR_HPMCOUNTER30H 0xc9e +#define CSR_HPMCOUNTER31H 0xc9f +#define CSR_MCYCLEH 0xb80 +#define CSR_MINSTRETH 0xb82 +#define CSR_MHPMCOUNTER3H 0xb83 +#define CSR_MHPMCOUNTER4H 0xb84 +#define CSR_MHPMCOUNTER5H 0xb85 +#define CSR_MHPMCOUNTER6H 0xb86 +#define CSR_MHPMCOUNTER7H 0xb87 +#define CSR_MHPMCOUNTER8H 0xb88 +#define CSR_MHPMCOUNTER9H 0xb89 +#define CSR_MHPMCOUNTER10H 0xb8a +#define CSR_MHPMCOUNTER11H 0xb8b +#define CSR_MHPMCOUNTER12H 0xb8c +#define CSR_MHPMCOUNTER13H 0xb8d +#define CSR_MHPMCOUNTER14H 0xb8e +#define CSR_MHPMCOUNTER15H 0xb8f +#define CSR_MHPMCOUNTER16H 0xb90 +#define CSR_MHPMCOUNTER17H 0xb91 +#define CSR_MHPMCOUNTER18H 0xb92 +#define CSR_MHPMCOUNTER19H 0xb93 +#define CSR_MHPMCOUNTER20H 0xb94 +#define CSR_MHPMCOUNTER21H 0xb95 +#define CSR_MHPMCOUNTER22H 0xb96 +#define CSR_MHPMCOUNTER23H 0xb97 +#define CSR_MHPMCOUNTER24H 0xb98 +#define CSR_MHPMCOUNTER25H 0xb99 +#define CSR_MHPMCOUNTER26H 0xb9a +#define CSR_MHPMCOUNTER27H 0xb9b +#define CSR_MHPMCOUNTER28H 0xb9c +#define CSR_MHPMCOUNTER29H 0xb9d +#define CSR_MHPMCOUNTER30H 0xb9e +#define CSR_MHPMCOUNTER31H 0xb9f +#define CAUSE_MISALIGNED_FETCH 0x0 +#define CAUSE_FETCH_ACCESS 0x1 +#define CAUSE_ILLEGAL_INSTRUCTION 0x2 +#define CAUSE_BREAKPOINT 0x3 +#define CAUSE_MISALIGNED_LOAD 0x4 +#define CAUSE_LOAD_ACCESS 0x5 +#define CAUSE_MISALIGNED_STORE 0x6 +#define CAUSE_STORE_ACCESS 0x7 +#define CAUSE_USER_ECALL 0x8 +#define CAUSE_SUPERVISOR_ECALL 0x9 +#define CAUSE_HYPERVISOR_ECALL 0xa +#define CAUSE_MACHINE_ECALL 0xb +#define CAUSE_FETCH_PAGE_FAULT 0xc +#define CAUSE_LOAD_PAGE_FAULT 0xd +#define CAUSE_STORE_PAGE_FAULT 0xf +#endif +#ifdef DECLARE_INSN +DECLARE_INSN(beq, MATCH_BEQ, MASK_BEQ) +DECLARE_INSN(bne, MATCH_BNE, MASK_BNE) +DECLARE_INSN(blt, MATCH_BLT, MASK_BLT) +DECLARE_INSN(bge, MATCH_BGE, MASK_BGE) +DECLARE_INSN(bltu, MATCH_BLTU, MASK_BLTU) +DECLARE_INSN(bgeu, MATCH_BGEU, MASK_BGEU) +DECLARE_INSN(jalr, MATCH_JALR, MASK_JALR) +DECLARE_INSN(jal, MATCH_JAL, MASK_JAL) +DECLARE_INSN(lui, MATCH_LUI, MASK_LUI) +DECLARE_INSN(auipc, MATCH_AUIPC, MASK_AUIPC) +DECLARE_INSN(addi, MATCH_ADDI, MASK_ADDI) +DECLARE_INSN(slli, MATCH_SLLI, MASK_SLLI) +DECLARE_INSN(slti, MATCH_SLTI, MASK_SLTI) +DECLARE_INSN(sltiu, MATCH_SLTIU, MASK_SLTIU) +DECLARE_INSN(xori, MATCH_XORI, MASK_XORI) +DECLARE_INSN(srli, MATCH_SRLI, MASK_SRLI) +DECLARE_INSN(srai, MATCH_SRAI, MASK_SRAI) +DECLARE_INSN(ori, MATCH_ORI, MASK_ORI) +DECLARE_INSN(andi, MATCH_ANDI, MASK_ANDI) +DECLARE_INSN(add, MATCH_ADD, MASK_ADD) +DECLARE_INSN(sub, MATCH_SUB, MASK_SUB) +DECLARE_INSN(sll, MATCH_SLL, MASK_SLL) +DECLARE_INSN(slt, MATCH_SLT, MASK_SLT) +DECLARE_INSN(sltu, MATCH_SLTU, MASK_SLTU) +DECLARE_INSN(xor, MATCH_XOR, MASK_XOR) +DECLARE_INSN(srl, MATCH_SRL, MASK_SRL) +DECLARE_INSN(sra, MATCH_SRA, MASK_SRA) +DECLARE_INSN(or, MATCH_OR, MASK_OR) +DECLARE_INSN(and, MATCH_AND, MASK_AND) +DECLARE_INSN(addiw, MATCH_ADDIW, MASK_ADDIW) +DECLARE_INSN(slliw, MATCH_SLLIW, MASK_SLLIW) +DECLARE_INSN(srliw, MATCH_SRLIW, MASK_SRLIW) +DECLARE_INSN(sraiw, MATCH_SRAIW, MASK_SRAIW) +DECLARE_INSN(addw, MATCH_ADDW, MASK_ADDW) +DECLARE_INSN(subw, MATCH_SUBW, MASK_SUBW) +DECLARE_INSN(sllw, MATCH_SLLW, MASK_SLLW) +DECLARE_INSN(srlw, MATCH_SRLW, MASK_SRLW) +DECLARE_INSN(sraw, MATCH_SRAW, MASK_SRAW) +DECLARE_INSN(lb, MATCH_LB, MASK_LB) +DECLARE_INSN(lh, MATCH_LH, MASK_LH) +DECLARE_INSN(lw, MATCH_LW, MASK_LW) +DECLARE_INSN(ld, MATCH_LD, MASK_LD) +DECLARE_INSN(lbu, MATCH_LBU, MASK_LBU) +DECLARE_INSN(lhu, MATCH_LHU, MASK_LHU) +DECLARE_INSN(lwu, MATCH_LWU, MASK_LWU) +DECLARE_INSN(sb, MATCH_SB, MASK_SB) +DECLARE_INSN(sh, MATCH_SH, MASK_SH) +DECLARE_INSN(sw, MATCH_SW, MASK_SW) +DECLARE_INSN(sd, MATCH_SD, MASK_SD) +DECLARE_INSN(fence, MATCH_FENCE, MASK_FENCE) +DECLARE_INSN(fence_i, MATCH_FENCE_I, MASK_FENCE_I) +DECLARE_INSN(mul, MATCH_MUL, MASK_MUL) +DECLARE_INSN(mulh, MATCH_MULH, MASK_MULH) +DECLARE_INSN(mulhsu, MATCH_MULHSU, MASK_MULHSU) +DECLARE_INSN(mulhu, MATCH_MULHU, MASK_MULHU) +DECLARE_INSN(div, MATCH_DIV, MASK_DIV) +DECLARE_INSN(divu, MATCH_DIVU, MASK_DIVU) +DECLARE_INSN(rem, MATCH_REM, MASK_REM) +DECLARE_INSN(remu, MATCH_REMU, MASK_REMU) +DECLARE_INSN(mulw, MATCH_MULW, MASK_MULW) +DECLARE_INSN(divw, MATCH_DIVW, MASK_DIVW) +DECLARE_INSN(divuw, MATCH_DIVUW, MASK_DIVUW) +DECLARE_INSN(remw, MATCH_REMW, MASK_REMW) +DECLARE_INSN(remuw, MATCH_REMUW, MASK_REMUW) +DECLARE_INSN(amoadd_w, MATCH_AMOADD_W, MASK_AMOADD_W) +DECLARE_INSN(amoxor_w, MATCH_AMOXOR_W, MASK_AMOXOR_W) +DECLARE_INSN(amoor_w, MATCH_AMOOR_W, MASK_AMOOR_W) +DECLARE_INSN(amoand_w, MATCH_AMOAND_W, MASK_AMOAND_W) +DECLARE_INSN(amomin_w, MATCH_AMOMIN_W, MASK_AMOMIN_W) +DECLARE_INSN(amomax_w, MATCH_AMOMAX_W, MASK_AMOMAX_W) +DECLARE_INSN(amominu_w, MATCH_AMOMINU_W, MASK_AMOMINU_W) +DECLARE_INSN(amomaxu_w, MATCH_AMOMAXU_W, MASK_AMOMAXU_W) +DECLARE_INSN(amoswap_w, MATCH_AMOSWAP_W, MASK_AMOSWAP_W) +DECLARE_INSN(lr_w, MATCH_LR_W, MASK_LR_W) +DECLARE_INSN(sc_w, MATCH_SC_W, MASK_SC_W) +DECLARE_INSN(amoadd_d, MATCH_AMOADD_D, MASK_AMOADD_D) +DECLARE_INSN(amoxor_d, MATCH_AMOXOR_D, MASK_AMOXOR_D) +DECLARE_INSN(amoor_d, MATCH_AMOOR_D, MASK_AMOOR_D) +DECLARE_INSN(amoand_d, MATCH_AMOAND_D, MASK_AMOAND_D) +DECLARE_INSN(amomin_d, MATCH_AMOMIN_D, MASK_AMOMIN_D) +DECLARE_INSN(amomax_d, MATCH_AMOMAX_D, MASK_AMOMAX_D) +DECLARE_INSN(amominu_d, MATCH_AMOMINU_D, MASK_AMOMINU_D) +DECLARE_INSN(amomaxu_d, MATCH_AMOMAXU_D, MASK_AMOMAXU_D) +DECLARE_INSN(amoswap_d, MATCH_AMOSWAP_D, MASK_AMOSWAP_D) +DECLARE_INSN(lr_d, MATCH_LR_D, MASK_LR_D) +DECLARE_INSN(sc_d, MATCH_SC_D, MASK_SC_D) +DECLARE_INSN(ecall, MATCH_ECALL, MASK_ECALL) +DECLARE_INSN(ebreak, MATCH_EBREAK, MASK_EBREAK) +DECLARE_INSN(uret, MATCH_URET, MASK_URET) +DECLARE_INSN(sret, MATCH_SRET, MASK_SRET) +DECLARE_INSN(mret, MATCH_MRET, MASK_MRET) +DECLARE_INSN(dret, MATCH_DRET, MASK_DRET) +DECLARE_INSN(sfence_vma, MATCH_SFENCE_VMA, MASK_SFENCE_VMA) +DECLARE_INSN(wfi, MATCH_WFI, MASK_WFI) +DECLARE_INSN(csrrw, MATCH_CSRRW, MASK_CSRRW) +DECLARE_INSN(csrrs, MATCH_CSRRS, MASK_CSRRS) +DECLARE_INSN(csrrc, MATCH_CSRRC, MASK_CSRRC) +DECLARE_INSN(csrrwi, MATCH_CSRRWI, MASK_CSRRWI) +DECLARE_INSN(csrrsi, MATCH_CSRRSI, MASK_CSRRSI) +DECLARE_INSN(csrrci, MATCH_CSRRCI, MASK_CSRRCI) +DECLARE_INSN(fadd_s, MATCH_FADD_S, MASK_FADD_S) +DECLARE_INSN(fsub_s, MATCH_FSUB_S, MASK_FSUB_S) +DECLARE_INSN(fmul_s, MATCH_FMUL_S, MASK_FMUL_S) +DECLARE_INSN(fdiv_s, MATCH_FDIV_S, MASK_FDIV_S) +DECLARE_INSN(fsgnj_s, MATCH_FSGNJ_S, MASK_FSGNJ_S) +DECLARE_INSN(fsgnjn_s, MATCH_FSGNJN_S, MASK_FSGNJN_S) +DECLARE_INSN(fsgnjx_s, MATCH_FSGNJX_S, MASK_FSGNJX_S) +DECLARE_INSN(fmin_s, MATCH_FMIN_S, MASK_FMIN_S) +DECLARE_INSN(fmax_s, MATCH_FMAX_S, MASK_FMAX_S) +DECLARE_INSN(fsqrt_s, MATCH_FSQRT_S, MASK_FSQRT_S) +DECLARE_INSN(fadd_d, MATCH_FADD_D, MASK_FADD_D) +DECLARE_INSN(fsub_d, MATCH_FSUB_D, MASK_FSUB_D) +DECLARE_INSN(fmul_d, MATCH_FMUL_D, MASK_FMUL_D) +DECLARE_INSN(fdiv_d, MATCH_FDIV_D, MASK_FDIV_D) +DECLARE_INSN(fsgnj_d, MATCH_FSGNJ_D, MASK_FSGNJ_D) +DECLARE_INSN(fsgnjn_d, MATCH_FSGNJN_D, MASK_FSGNJN_D) +DECLARE_INSN(fsgnjx_d, MATCH_FSGNJX_D, MASK_FSGNJX_D) +DECLARE_INSN(fmin_d, MATCH_FMIN_D, MASK_FMIN_D) +DECLARE_INSN(fmax_d, MATCH_FMAX_D, MASK_FMAX_D) +DECLARE_INSN(fcvt_s_d, MATCH_FCVT_S_D, MASK_FCVT_S_D) +DECLARE_INSN(fcvt_d_s, MATCH_FCVT_D_S, MASK_FCVT_D_S) +DECLARE_INSN(fsqrt_d, MATCH_FSQRT_D, MASK_FSQRT_D) +DECLARE_INSN(fadd_q, MATCH_FADD_Q, MASK_FADD_Q) +DECLARE_INSN(fsub_q, MATCH_FSUB_Q, MASK_FSUB_Q) +DECLARE_INSN(fmul_q, MATCH_FMUL_Q, MASK_FMUL_Q) +DECLARE_INSN(fdiv_q, MATCH_FDIV_Q, MASK_FDIV_Q) +DECLARE_INSN(fsgnj_q, MATCH_FSGNJ_Q, MASK_FSGNJ_Q) +DECLARE_INSN(fsgnjn_q, MATCH_FSGNJN_Q, MASK_FSGNJN_Q) +DECLARE_INSN(fsgnjx_q, MATCH_FSGNJX_Q, MASK_FSGNJX_Q) +DECLARE_INSN(fmin_q, MATCH_FMIN_Q, MASK_FMIN_Q) +DECLARE_INSN(fmax_q, MATCH_FMAX_Q, MASK_FMAX_Q) +DECLARE_INSN(fcvt_s_q, MATCH_FCVT_S_Q, MASK_FCVT_S_Q) +DECLARE_INSN(fcvt_q_s, MATCH_FCVT_Q_S, MASK_FCVT_Q_S) +DECLARE_INSN(fcvt_d_q, MATCH_FCVT_D_Q, MASK_FCVT_D_Q) +DECLARE_INSN(fcvt_q_d, MATCH_FCVT_Q_D, MASK_FCVT_Q_D) +DECLARE_INSN(fsqrt_q, MATCH_FSQRT_Q, MASK_FSQRT_Q) +DECLARE_INSN(fle_s, MATCH_FLE_S, MASK_FLE_S) +DECLARE_INSN(flt_s, MATCH_FLT_S, MASK_FLT_S) +DECLARE_INSN(feq_s, MATCH_FEQ_S, MASK_FEQ_S) +DECLARE_INSN(fle_d, MATCH_FLE_D, MASK_FLE_D) +DECLARE_INSN(flt_d, MATCH_FLT_D, MASK_FLT_D) +DECLARE_INSN(feq_d, MATCH_FEQ_D, MASK_FEQ_D) +DECLARE_INSN(fle_q, MATCH_FLE_Q, MASK_FLE_Q) +DECLARE_INSN(flt_q, MATCH_FLT_Q, MASK_FLT_Q) +DECLARE_INSN(feq_q, MATCH_FEQ_Q, MASK_FEQ_Q) +DECLARE_INSN(fcvt_w_s, MATCH_FCVT_W_S, MASK_FCVT_W_S) +DECLARE_INSN(fcvt_wu_s, MATCH_FCVT_WU_S, MASK_FCVT_WU_S) +DECLARE_INSN(fcvt_l_s, MATCH_FCVT_L_S, MASK_FCVT_L_S) +DECLARE_INSN(fcvt_lu_s, MATCH_FCVT_LU_S, MASK_FCVT_LU_S) +DECLARE_INSN(fmv_x_w, MATCH_FMV_X_W, MASK_FMV_X_W) +DECLARE_INSN(fclass_s, MATCH_FCLASS_S, MASK_FCLASS_S) +DECLARE_INSN(fcvt_w_d, MATCH_FCVT_W_D, MASK_FCVT_W_D) +DECLARE_INSN(fcvt_wu_d, MATCH_FCVT_WU_D, MASK_FCVT_WU_D) +DECLARE_INSN(fcvt_l_d, MATCH_FCVT_L_D, MASK_FCVT_L_D) +DECLARE_INSN(fcvt_lu_d, MATCH_FCVT_LU_D, MASK_FCVT_LU_D) +DECLARE_INSN(fmv_x_d, MATCH_FMV_X_D, MASK_FMV_X_D) +DECLARE_INSN(fclass_d, MATCH_FCLASS_D, MASK_FCLASS_D) +DECLARE_INSN(fcvt_w_q, MATCH_FCVT_W_Q, MASK_FCVT_W_Q) +DECLARE_INSN(fcvt_wu_q, MATCH_FCVT_WU_Q, MASK_FCVT_WU_Q) +DECLARE_INSN(fcvt_l_q, MATCH_FCVT_L_Q, MASK_FCVT_L_Q) +DECLARE_INSN(fcvt_lu_q, MATCH_FCVT_LU_Q, MASK_FCVT_LU_Q) +DECLARE_INSN(fmv_x_q, MATCH_FMV_X_Q, MASK_FMV_X_Q) +DECLARE_INSN(fclass_q, MATCH_FCLASS_Q, MASK_FCLASS_Q) +DECLARE_INSN(fcvt_s_w, MATCH_FCVT_S_W, MASK_FCVT_S_W) +DECLARE_INSN(fcvt_s_wu, MATCH_FCVT_S_WU, MASK_FCVT_S_WU) +DECLARE_INSN(fcvt_s_l, MATCH_FCVT_S_L, MASK_FCVT_S_L) +DECLARE_INSN(fcvt_s_lu, MATCH_FCVT_S_LU, MASK_FCVT_S_LU) +DECLARE_INSN(fmv_w_x, MATCH_FMV_W_X, MASK_FMV_W_X) +DECLARE_INSN(fcvt_d_w, MATCH_FCVT_D_W, MASK_FCVT_D_W) +DECLARE_INSN(fcvt_d_wu, MATCH_FCVT_D_WU, MASK_FCVT_D_WU) +DECLARE_INSN(fcvt_d_l, MATCH_FCVT_D_L, MASK_FCVT_D_L) +DECLARE_INSN(fcvt_d_lu, MATCH_FCVT_D_LU, MASK_FCVT_D_LU) +DECLARE_INSN(fmv_d_x, MATCH_FMV_D_X, MASK_FMV_D_X) +DECLARE_INSN(fcvt_q_w, MATCH_FCVT_Q_W, MASK_FCVT_Q_W) +DECLARE_INSN(fcvt_q_wu, MATCH_FCVT_Q_WU, MASK_FCVT_Q_WU) +DECLARE_INSN(fcvt_q_l, MATCH_FCVT_Q_L, MASK_FCVT_Q_L) +DECLARE_INSN(fcvt_q_lu, MATCH_FCVT_Q_LU, MASK_FCVT_Q_LU) +DECLARE_INSN(fmv_q_x, MATCH_FMV_Q_X, MASK_FMV_Q_X) +DECLARE_INSN(flw, MATCH_FLW, MASK_FLW) +DECLARE_INSN(fld, MATCH_FLD, MASK_FLD) +DECLARE_INSN(flq, MATCH_FLQ, MASK_FLQ) +DECLARE_INSN(fsw, MATCH_FSW, MASK_FSW) +DECLARE_INSN(fsd, MATCH_FSD, MASK_FSD) +DECLARE_INSN(fsq, MATCH_FSQ, MASK_FSQ) +DECLARE_INSN(fmadd_s, MATCH_FMADD_S, MASK_FMADD_S) +DECLARE_INSN(fmsub_s, MATCH_FMSUB_S, MASK_FMSUB_S) +DECLARE_INSN(fnmsub_s, MATCH_FNMSUB_S, MASK_FNMSUB_S) +DECLARE_INSN(fnmadd_s, MATCH_FNMADD_S, MASK_FNMADD_S) +DECLARE_INSN(fmadd_d, MATCH_FMADD_D, MASK_FMADD_D) +DECLARE_INSN(fmsub_d, MATCH_FMSUB_D, MASK_FMSUB_D) +DECLARE_INSN(fnmsub_d, MATCH_FNMSUB_D, MASK_FNMSUB_D) +DECLARE_INSN(fnmadd_d, MATCH_FNMADD_D, MASK_FNMADD_D) +DECLARE_INSN(fmadd_q, MATCH_FMADD_Q, MASK_FMADD_Q) +DECLARE_INSN(fmsub_q, MATCH_FMSUB_Q, MASK_FMSUB_Q) +DECLARE_INSN(fnmsub_q, MATCH_FNMSUB_Q, MASK_FNMSUB_Q) +DECLARE_INSN(fnmadd_q, MATCH_FNMADD_Q, MASK_FNMADD_Q) +DECLARE_INSN(c_nop, MATCH_C_NOP, MASK_C_NOP) +DECLARE_INSN(c_addi16sp, MATCH_C_ADDI16SP, MASK_C_ADDI16SP) +DECLARE_INSN(c_jr, MATCH_C_JR, MASK_C_JR) +DECLARE_INSN(c_jalr, MATCH_C_JALR, MASK_C_JALR) +DECLARE_INSN(c_ebreak, MATCH_C_EBREAK, MASK_C_EBREAK) +DECLARE_INSN(c_ld, MATCH_C_LD, MASK_C_LD) +DECLARE_INSN(c_sd, MATCH_C_SD, MASK_C_SD) +DECLARE_INSN(c_addiw, MATCH_C_ADDIW, MASK_C_ADDIW) +DECLARE_INSN(c_ldsp, MATCH_C_LDSP, MASK_C_LDSP) +DECLARE_INSN(c_sdsp, MATCH_C_SDSP, MASK_C_SDSP) +DECLARE_INSN(c_addi4spn, MATCH_C_ADDI4SPN, MASK_C_ADDI4SPN) +DECLARE_INSN(c_fld, MATCH_C_FLD, MASK_C_FLD) +DECLARE_INSN(c_lw, MATCH_C_LW, MASK_C_LW) +DECLARE_INSN(c_flw, MATCH_C_FLW, MASK_C_FLW) +DECLARE_INSN(c_fsd, MATCH_C_FSD, MASK_C_FSD) +DECLARE_INSN(c_sw, MATCH_C_SW, MASK_C_SW) +DECLARE_INSN(c_fsw, MATCH_C_FSW, MASK_C_FSW) +DECLARE_INSN(c_addi, MATCH_C_ADDI, MASK_C_ADDI) +DECLARE_INSN(c_jal, MATCH_C_JAL, MASK_C_JAL) +DECLARE_INSN(c_li, MATCH_C_LI, MASK_C_LI) +DECLARE_INSN(c_lui, MATCH_C_LUI, MASK_C_LUI) +DECLARE_INSN(c_srli, MATCH_C_SRLI, MASK_C_SRLI) +DECLARE_INSN(c_srai, MATCH_C_SRAI, MASK_C_SRAI) +DECLARE_INSN(c_andi, MATCH_C_ANDI, MASK_C_ANDI) +DECLARE_INSN(c_sub, MATCH_C_SUB, MASK_C_SUB) +DECLARE_INSN(c_xor, MATCH_C_XOR, MASK_C_XOR) +DECLARE_INSN(c_or, MATCH_C_OR, MASK_C_OR) +DECLARE_INSN(c_and, MATCH_C_AND, MASK_C_AND) +DECLARE_INSN(c_subw, MATCH_C_SUBW, MASK_C_SUBW) +DECLARE_INSN(c_addw, MATCH_C_ADDW, MASK_C_ADDW) +DECLARE_INSN(c_j, MATCH_C_J, MASK_C_J) +DECLARE_INSN(c_beqz, MATCH_C_BEQZ, MASK_C_BEQZ) +DECLARE_INSN(c_bnez, MATCH_C_BNEZ, MASK_C_BNEZ) +DECLARE_INSN(c_slli, MATCH_C_SLLI, MASK_C_SLLI) +DECLARE_INSN(c_fldsp, MATCH_C_FLDSP, MASK_C_FLDSP) +DECLARE_INSN(c_lwsp, MATCH_C_LWSP, MASK_C_LWSP) +DECLARE_INSN(c_flwsp, MATCH_C_FLWSP, MASK_C_FLWSP) +DECLARE_INSN(c_mv, MATCH_C_MV, MASK_C_MV) +DECLARE_INSN(c_add, MATCH_C_ADD, MASK_C_ADD) +DECLARE_INSN(c_fsdsp, MATCH_C_FSDSP, MASK_C_FSDSP) +DECLARE_INSN(c_swsp, MATCH_C_SWSP, MASK_C_SWSP) +DECLARE_INSN(c_fswsp, MATCH_C_FSWSP, MASK_C_FSWSP) +DECLARE_INSN(custom0, MATCH_CUSTOM0, MASK_CUSTOM0) +DECLARE_INSN(custom0_rs1, MATCH_CUSTOM0_RS1, MASK_CUSTOM0_RS1) +DECLARE_INSN(custom0_rs1_rs2, MATCH_CUSTOM0_RS1_RS2, MASK_CUSTOM0_RS1_RS2) +DECLARE_INSN(custom0_rd, MATCH_CUSTOM0_RD, MASK_CUSTOM0_RD) +DECLARE_INSN(custom0_rd_rs1, MATCH_CUSTOM0_RD_RS1, MASK_CUSTOM0_RD_RS1) +DECLARE_INSN(custom0_rd_rs1_rs2, MATCH_CUSTOM0_RD_RS1_RS2, MASK_CUSTOM0_RD_RS1_RS2) +DECLARE_INSN(custom1, MATCH_CUSTOM1, MASK_CUSTOM1) +DECLARE_INSN(custom1_rs1, MATCH_CUSTOM1_RS1, MASK_CUSTOM1_RS1) +DECLARE_INSN(custom1_rs1_rs2, MATCH_CUSTOM1_RS1_RS2, MASK_CUSTOM1_RS1_RS2) +DECLARE_INSN(custom1_rd, MATCH_CUSTOM1_RD, MASK_CUSTOM1_RD) +DECLARE_INSN(custom1_rd_rs1, MATCH_CUSTOM1_RD_RS1, MASK_CUSTOM1_RD_RS1) +DECLARE_INSN(custom1_rd_rs1_rs2, MATCH_CUSTOM1_RD_RS1_RS2, MASK_CUSTOM1_RD_RS1_RS2) +DECLARE_INSN(custom2, MATCH_CUSTOM2, MASK_CUSTOM2) +DECLARE_INSN(custom2_rs1, MATCH_CUSTOM2_RS1, MASK_CUSTOM2_RS1) +DECLARE_INSN(custom2_rs1_rs2, MATCH_CUSTOM2_RS1_RS2, MASK_CUSTOM2_RS1_RS2) +DECLARE_INSN(custom2_rd, MATCH_CUSTOM2_RD, MASK_CUSTOM2_RD) +DECLARE_INSN(custom2_rd_rs1, MATCH_CUSTOM2_RD_RS1, MASK_CUSTOM2_RD_RS1) +DECLARE_INSN(custom2_rd_rs1_rs2, MATCH_CUSTOM2_RD_RS1_RS2, MASK_CUSTOM2_RD_RS1_RS2) +DECLARE_INSN(custom3, MATCH_CUSTOM3, MASK_CUSTOM3) +DECLARE_INSN(custom3_rs1, MATCH_CUSTOM3_RS1, MASK_CUSTOM3_RS1) +DECLARE_INSN(custom3_rs1_rs2, MATCH_CUSTOM3_RS1_RS2, MASK_CUSTOM3_RS1_RS2) +DECLARE_INSN(custom3_rd, MATCH_CUSTOM3_RD, MASK_CUSTOM3_RD) +DECLARE_INSN(custom3_rd_rs1, MATCH_CUSTOM3_RD_RS1, MASK_CUSTOM3_RD_RS1) +DECLARE_INSN(custom3_rd_rs1_rs2, MATCH_CUSTOM3_RD_RS1_RS2, MASK_CUSTOM3_RD_RS1_RS2) +#endif +#ifdef DECLARE_CSR +DECLARE_CSR(fflags, CSR_FFLAGS) +DECLARE_CSR(frm, CSR_FRM) +DECLARE_CSR(fcsr, CSR_FCSR) +DECLARE_CSR(cycle, CSR_CYCLE) +DECLARE_CSR(time, CSR_TIME) +DECLARE_CSR(instret, CSR_INSTRET) +DECLARE_CSR(hpmcounter3, CSR_HPMCOUNTER3) +DECLARE_CSR(hpmcounter4, CSR_HPMCOUNTER4) +DECLARE_CSR(hpmcounter5, CSR_HPMCOUNTER5) +DECLARE_CSR(hpmcounter6, CSR_HPMCOUNTER6) +DECLARE_CSR(hpmcounter7, CSR_HPMCOUNTER7) +DECLARE_CSR(hpmcounter8, CSR_HPMCOUNTER8) +DECLARE_CSR(hpmcounter9, CSR_HPMCOUNTER9) +DECLARE_CSR(hpmcounter10, CSR_HPMCOUNTER10) +DECLARE_CSR(hpmcounter11, CSR_HPMCOUNTER11) +DECLARE_CSR(hpmcounter12, CSR_HPMCOUNTER12) +DECLARE_CSR(hpmcounter13, CSR_HPMCOUNTER13) +DECLARE_CSR(hpmcounter14, CSR_HPMCOUNTER14) +DECLARE_CSR(hpmcounter15, CSR_HPMCOUNTER15) +DECLARE_CSR(hpmcounter16, CSR_HPMCOUNTER16) +DECLARE_CSR(hpmcounter17, CSR_HPMCOUNTER17) +DECLARE_CSR(hpmcounter18, CSR_HPMCOUNTER18) +DECLARE_CSR(hpmcounter19, CSR_HPMCOUNTER19) +DECLARE_CSR(hpmcounter20, CSR_HPMCOUNTER20) +DECLARE_CSR(hpmcounter21, CSR_HPMCOUNTER21) +DECLARE_CSR(hpmcounter22, CSR_HPMCOUNTER22) +DECLARE_CSR(hpmcounter23, CSR_HPMCOUNTER23) +DECLARE_CSR(hpmcounter24, CSR_HPMCOUNTER24) +DECLARE_CSR(hpmcounter25, CSR_HPMCOUNTER25) +DECLARE_CSR(hpmcounter26, CSR_HPMCOUNTER26) +DECLARE_CSR(hpmcounter27, CSR_HPMCOUNTER27) +DECLARE_CSR(hpmcounter28, CSR_HPMCOUNTER28) +DECLARE_CSR(hpmcounter29, CSR_HPMCOUNTER29) +DECLARE_CSR(hpmcounter30, CSR_HPMCOUNTER30) +DECLARE_CSR(hpmcounter31, CSR_HPMCOUNTER31) +DECLARE_CSR(sstatus, CSR_SSTATUS) +DECLARE_CSR(sie, CSR_SIE) +DECLARE_CSR(stvec, CSR_STVEC) +DECLARE_CSR(scounteren, CSR_SCOUNTEREN) +DECLARE_CSR(sscratch, CSR_SSCRATCH) +DECLARE_CSR(sepc, CSR_SEPC) +DECLARE_CSR(scause, CSR_SCAUSE) +DECLARE_CSR(stval, CSR_STVAL) +DECLARE_CSR(sip, CSR_SIP) +DECLARE_CSR(satp, CSR_SATP) +DECLARE_CSR(mstatus, CSR_MSTATUS) +DECLARE_CSR(misa, CSR_MISA) +DECLARE_CSR(medeleg, CSR_MEDELEG) +DECLARE_CSR(mideleg, CSR_MIDELEG) +DECLARE_CSR(mie, CSR_MIE) +DECLARE_CSR(mtvec, CSR_MTVEC) +DECLARE_CSR(mcounteren, CSR_MCOUNTEREN) +DECLARE_CSR(mscratch, CSR_MSCRATCH) +DECLARE_CSR(mepc, CSR_MEPC) +DECLARE_CSR(mcause, CSR_MCAUSE) +DECLARE_CSR(mtval, CSR_MTVAL) +DECLARE_CSR(mip, CSR_MIP) +DECLARE_CSR(pmpcfg0, CSR_PMPCFG0) +DECLARE_CSR(pmpcfg1, CSR_PMPCFG1) +DECLARE_CSR(pmpcfg2, CSR_PMPCFG2) +DECLARE_CSR(pmpcfg3, CSR_PMPCFG3) +DECLARE_CSR(pmpaddr0, CSR_PMPADDR0) +DECLARE_CSR(pmpaddr1, CSR_PMPADDR1) +DECLARE_CSR(pmpaddr2, CSR_PMPADDR2) +DECLARE_CSR(pmpaddr3, CSR_PMPADDR3) +DECLARE_CSR(pmpaddr4, CSR_PMPADDR4) +DECLARE_CSR(pmpaddr5, CSR_PMPADDR5) +DECLARE_CSR(pmpaddr6, CSR_PMPADDR6) +DECLARE_CSR(pmpaddr7, CSR_PMPADDR7) +DECLARE_CSR(pmpaddr8, CSR_PMPADDR8) +DECLARE_CSR(pmpaddr9, CSR_PMPADDR9) +DECLARE_CSR(pmpaddr10, CSR_PMPADDR10) +DECLARE_CSR(pmpaddr11, CSR_PMPADDR11) +DECLARE_CSR(pmpaddr12, CSR_PMPADDR12) +DECLARE_CSR(pmpaddr13, CSR_PMPADDR13) +DECLARE_CSR(pmpaddr14, CSR_PMPADDR14) +DECLARE_CSR(pmpaddr15, CSR_PMPADDR15) +DECLARE_CSR(tselect, CSR_TSELECT) +DECLARE_CSR(tdata1, CSR_TDATA1) +DECLARE_CSR(tdata2, CSR_TDATA2) +DECLARE_CSR(tdata3, CSR_TDATA3) +DECLARE_CSR(dcsr, CSR_DCSR) +DECLARE_CSR(dpc, CSR_DPC) +DECLARE_CSR(dscratch, CSR_DSCRATCH) +DECLARE_CSR(mcycle, CSR_MCYCLE) +DECLARE_CSR(minstret, CSR_MINSTRET) +DECLARE_CSR(mhpmcounter3, CSR_MHPMCOUNTER3) +DECLARE_CSR(mhpmcounter4, CSR_MHPMCOUNTER4) +DECLARE_CSR(mhpmcounter5, CSR_MHPMCOUNTER5) +DECLARE_CSR(mhpmcounter6, CSR_MHPMCOUNTER6) +DECLARE_CSR(mhpmcounter7, CSR_MHPMCOUNTER7) +DECLARE_CSR(mhpmcounter8, CSR_MHPMCOUNTER8) +DECLARE_CSR(mhpmcounter9, CSR_MHPMCOUNTER9) +DECLARE_CSR(mhpmcounter10, CSR_MHPMCOUNTER10) +DECLARE_CSR(mhpmcounter11, CSR_MHPMCOUNTER11) +DECLARE_CSR(mhpmcounter12, CSR_MHPMCOUNTER12) +DECLARE_CSR(mhpmcounter13, CSR_MHPMCOUNTER13) +DECLARE_CSR(mhpmcounter14, CSR_MHPMCOUNTER14) +DECLARE_CSR(mhpmcounter15, CSR_MHPMCOUNTER15) +DECLARE_CSR(mhpmcounter16, CSR_MHPMCOUNTER16) +DECLARE_CSR(mhpmcounter17, CSR_MHPMCOUNTER17) +DECLARE_CSR(mhpmcounter18, CSR_MHPMCOUNTER18) +DECLARE_CSR(mhpmcounter19, CSR_MHPMCOUNTER19) +DECLARE_CSR(mhpmcounter20, CSR_MHPMCOUNTER20) +DECLARE_CSR(mhpmcounter21, CSR_MHPMCOUNTER21) +DECLARE_CSR(mhpmcounter22, CSR_MHPMCOUNTER22) +DECLARE_CSR(mhpmcounter23, CSR_MHPMCOUNTER23) +DECLARE_CSR(mhpmcounter24, CSR_MHPMCOUNTER24) +DECLARE_CSR(mhpmcounter25, CSR_MHPMCOUNTER25) +DECLARE_CSR(mhpmcounter26, CSR_MHPMCOUNTER26) +DECLARE_CSR(mhpmcounter27, CSR_MHPMCOUNTER27) +DECLARE_CSR(mhpmcounter28, CSR_MHPMCOUNTER28) +DECLARE_CSR(mhpmcounter29, CSR_MHPMCOUNTER29) +DECLARE_CSR(mhpmcounter30, CSR_MHPMCOUNTER30) +DECLARE_CSR(mhpmcounter31, CSR_MHPMCOUNTER31) +DECLARE_CSR(mhpmevent3, CSR_MHPMEVENT3) +DECLARE_CSR(mhpmevent4, CSR_MHPMEVENT4) +DECLARE_CSR(mhpmevent5, CSR_MHPMEVENT5) +DECLARE_CSR(mhpmevent6, CSR_MHPMEVENT6) +DECLARE_CSR(mhpmevent7, CSR_MHPMEVENT7) +DECLARE_CSR(mhpmevent8, CSR_MHPMEVENT8) +DECLARE_CSR(mhpmevent9, CSR_MHPMEVENT9) +DECLARE_CSR(mhpmevent10, CSR_MHPMEVENT10) +DECLARE_CSR(mhpmevent11, CSR_MHPMEVENT11) +DECLARE_CSR(mhpmevent12, CSR_MHPMEVENT12) +DECLARE_CSR(mhpmevent13, CSR_MHPMEVENT13) +DECLARE_CSR(mhpmevent14, CSR_MHPMEVENT14) +DECLARE_CSR(mhpmevent15, CSR_MHPMEVENT15) +DECLARE_CSR(mhpmevent16, CSR_MHPMEVENT16) +DECLARE_CSR(mhpmevent17, CSR_MHPMEVENT17) +DECLARE_CSR(mhpmevent18, CSR_MHPMEVENT18) +DECLARE_CSR(mhpmevent19, CSR_MHPMEVENT19) +DECLARE_CSR(mhpmevent20, CSR_MHPMEVENT20) +DECLARE_CSR(mhpmevent21, CSR_MHPMEVENT21) +DECLARE_CSR(mhpmevent22, CSR_MHPMEVENT22) +DECLARE_CSR(mhpmevent23, CSR_MHPMEVENT23) +DECLARE_CSR(mhpmevent24, CSR_MHPMEVENT24) +DECLARE_CSR(mhpmevent25, CSR_MHPMEVENT25) +DECLARE_CSR(mhpmevent26, CSR_MHPMEVENT26) +DECLARE_CSR(mhpmevent27, CSR_MHPMEVENT27) +DECLARE_CSR(mhpmevent28, CSR_MHPMEVENT28) +DECLARE_CSR(mhpmevent29, CSR_MHPMEVENT29) +DECLARE_CSR(mhpmevent30, CSR_MHPMEVENT30) +DECLARE_CSR(mhpmevent31, CSR_MHPMEVENT31) +DECLARE_CSR(mvendorid, CSR_MVENDORID) +DECLARE_CSR(marchid, CSR_MARCHID) +DECLARE_CSR(mimpid, CSR_MIMPID) +DECLARE_CSR(mhartid, CSR_MHARTID) +DECLARE_CSR(cycleh, CSR_CYCLEH) +DECLARE_CSR(timeh, CSR_TIMEH) +DECLARE_CSR(instreth, CSR_INSTRETH) +DECLARE_CSR(hpmcounter3h, CSR_HPMCOUNTER3H) +DECLARE_CSR(hpmcounter4h, CSR_HPMCOUNTER4H) +DECLARE_CSR(hpmcounter5h, CSR_HPMCOUNTER5H) +DECLARE_CSR(hpmcounter6h, CSR_HPMCOUNTER6H) +DECLARE_CSR(hpmcounter7h, CSR_HPMCOUNTER7H) +DECLARE_CSR(hpmcounter8h, CSR_HPMCOUNTER8H) +DECLARE_CSR(hpmcounter9h, CSR_HPMCOUNTER9H) +DECLARE_CSR(hpmcounter10h, CSR_HPMCOUNTER10H) +DECLARE_CSR(hpmcounter11h, CSR_HPMCOUNTER11H) +DECLARE_CSR(hpmcounter12h, CSR_HPMCOUNTER12H) +DECLARE_CSR(hpmcounter13h, CSR_HPMCOUNTER13H) +DECLARE_CSR(hpmcounter14h, CSR_HPMCOUNTER14H) +DECLARE_CSR(hpmcounter15h, CSR_HPMCOUNTER15H) +DECLARE_CSR(hpmcounter16h, CSR_HPMCOUNTER16H) +DECLARE_CSR(hpmcounter17h, CSR_HPMCOUNTER17H) +DECLARE_CSR(hpmcounter18h, CSR_HPMCOUNTER18H) +DECLARE_CSR(hpmcounter19h, CSR_HPMCOUNTER19H) +DECLARE_CSR(hpmcounter20h, CSR_HPMCOUNTER20H) +DECLARE_CSR(hpmcounter21h, CSR_HPMCOUNTER21H) +DECLARE_CSR(hpmcounter22h, CSR_HPMCOUNTER22H) +DECLARE_CSR(hpmcounter23h, CSR_HPMCOUNTER23H) +DECLARE_CSR(hpmcounter24h, CSR_HPMCOUNTER24H) +DECLARE_CSR(hpmcounter25h, CSR_HPMCOUNTER25H) +DECLARE_CSR(hpmcounter26h, CSR_HPMCOUNTER26H) +DECLARE_CSR(hpmcounter27h, CSR_HPMCOUNTER27H) +DECLARE_CSR(hpmcounter28h, CSR_HPMCOUNTER28H) +DECLARE_CSR(hpmcounter29h, CSR_HPMCOUNTER29H) +DECLARE_CSR(hpmcounter30h, CSR_HPMCOUNTER30H) +DECLARE_CSR(hpmcounter31h, CSR_HPMCOUNTER31H) +DECLARE_CSR(mcycleh, CSR_MCYCLEH) +DECLARE_CSR(minstreth, CSR_MINSTRETH) +DECLARE_CSR(mhpmcounter3h, CSR_MHPMCOUNTER3H) +DECLARE_CSR(mhpmcounter4h, CSR_MHPMCOUNTER4H) +DECLARE_CSR(mhpmcounter5h, CSR_MHPMCOUNTER5H) +DECLARE_CSR(mhpmcounter6h, CSR_MHPMCOUNTER6H) +DECLARE_CSR(mhpmcounter7h, CSR_MHPMCOUNTER7H) +DECLARE_CSR(mhpmcounter8h, CSR_MHPMCOUNTER8H) +DECLARE_CSR(mhpmcounter9h, CSR_MHPMCOUNTER9H) +DECLARE_CSR(mhpmcounter10h, CSR_MHPMCOUNTER10H) +DECLARE_CSR(mhpmcounter11h, CSR_MHPMCOUNTER11H) +DECLARE_CSR(mhpmcounter12h, CSR_MHPMCOUNTER12H) +DECLARE_CSR(mhpmcounter13h, CSR_MHPMCOUNTER13H) +DECLARE_CSR(mhpmcounter14h, CSR_MHPMCOUNTER14H) +DECLARE_CSR(mhpmcounter15h, CSR_MHPMCOUNTER15H) +DECLARE_CSR(mhpmcounter16h, CSR_MHPMCOUNTER16H) +DECLARE_CSR(mhpmcounter17h, CSR_MHPMCOUNTER17H) +DECLARE_CSR(mhpmcounter18h, CSR_MHPMCOUNTER18H) +DECLARE_CSR(mhpmcounter19h, CSR_MHPMCOUNTER19H) +DECLARE_CSR(mhpmcounter20h, CSR_MHPMCOUNTER20H) +DECLARE_CSR(mhpmcounter21h, CSR_MHPMCOUNTER21H) +DECLARE_CSR(mhpmcounter22h, CSR_MHPMCOUNTER22H) +DECLARE_CSR(mhpmcounter23h, CSR_MHPMCOUNTER23H) +DECLARE_CSR(mhpmcounter24h, CSR_MHPMCOUNTER24H) +DECLARE_CSR(mhpmcounter25h, CSR_MHPMCOUNTER25H) +DECLARE_CSR(mhpmcounter26h, CSR_MHPMCOUNTER26H) +DECLARE_CSR(mhpmcounter27h, CSR_MHPMCOUNTER27H) +DECLARE_CSR(mhpmcounter28h, CSR_MHPMCOUNTER28H) +DECLARE_CSR(mhpmcounter29h, CSR_MHPMCOUNTER29H) +DECLARE_CSR(mhpmcounter30h, CSR_MHPMCOUNTER30H) +DECLARE_CSR(mhpmcounter31h, CSR_MHPMCOUNTER31H) +#endif +#ifdef DECLARE_CAUSE +DECLARE_CAUSE("misaligned fetch", CAUSE_MISALIGNED_FETCH) +DECLARE_CAUSE("fetch access", CAUSE_FETCH_ACCESS) +DECLARE_CAUSE("illegal instruction", CAUSE_ILLEGAL_INSTRUCTION) +DECLARE_CAUSE("breakpoint", CAUSE_BREAKPOINT) +DECLARE_CAUSE("misaligned load", CAUSE_MISALIGNED_LOAD) +DECLARE_CAUSE("load access", CAUSE_LOAD_ACCESS) +DECLARE_CAUSE("misaligned store", CAUSE_MISALIGNED_STORE) +DECLARE_CAUSE("store access", CAUSE_STORE_ACCESS) +DECLARE_CAUSE("user_ecall", CAUSE_USER_ECALL) +DECLARE_CAUSE("supervisor_ecall", CAUSE_SUPERVISOR_ECALL) +DECLARE_CAUSE("hypervisor_ecall", CAUSE_HYPERVISOR_ECALL) +DECLARE_CAUSE("machine_ecall", CAUSE_MACHINE_ECALL) +DECLARE_CAUSE("fetch page fault", CAUSE_FETCH_PAGE_FAULT) +DECLARE_CAUSE("load page fault", CAUSE_LOAD_PAGE_FAULT) +DECLARE_CAUSE("store page fault", CAUSE_STORE_PAGE_FAULT) +#endif diff --git a/riscv-pk/machine/fdt.c b/riscv-pk/machine/fdt.c new file mode 100644 index 0000000..061b19e --- /dev/null +++ b/riscv-pk/machine/fdt.c @@ -0,0 +1,740 @@ +#include +#include +#include +#include "config.h" +#include "fdt.h" +#include "mtrap.h" + +static inline uint32_t bswap(uint32_t x) +{ + uint32_t y = (x & 0x00FF00FF) << 8 | (x & 0xFF00FF00) >> 8; + uint32_t z = (y & 0x0000FFFF) << 16 | (y & 0xFFFF0000) >> 16; + return z; +} + +static inline int isstring(char c) +{ + if (c >= 'A' && c <= 'Z') + return 1; + if (c >= 'a' && c <= 'z') + return 1; + if (c >= '0' && c <= '9') + return 1; + if (c == '\0' || c == ' ' || c == ',' || c == '-') + return 1; + return 0; +} + +static uint32_t *fdt_scan_helper( + uint32_t *lex, + const char *strings, + struct fdt_scan_node *node, + const struct fdt_cb *cb) +{ + struct fdt_scan_node child; + struct fdt_scan_prop prop; + int last = 0; + + child.parent = node; + // these are the default cell counts, as per the FDT spec + child.address_cells = 2; + child.size_cells = 1; + prop.node = node; + + while (1) { + switch (bswap(lex[0])) { + case FDT_NOP: { + lex += 1; + break; + } + case FDT_PROP: { + assert (!last); + prop.name = strings + bswap(lex[2]); + prop.len = bswap(lex[1]); + prop.value = lex + 3; + if (node && !strcmp(prop.name, "#address-cells")) { node->address_cells = bswap(lex[3]); } + if (node && !strcmp(prop.name, "#size-cells")) { node->size_cells = bswap(lex[3]); } + lex += 3 + (prop.len+3)/4; + cb->prop(&prop, cb->extra); + break; + } + case FDT_BEGIN_NODE: { + uint32_t *lex_next; + if (!last && node && cb->done) cb->done(node, cb->extra); + last = 1; + child.name = (const char *)(lex+1); + if (cb->open) cb->open(&child, cb->extra); + lex_next = fdt_scan_helper( + lex + 2 + strlen(child.name)/4, + strings, &child, cb); + if (cb->close && cb->close(&child, cb->extra) == -1) + while (lex != lex_next) *lex++ = bswap(FDT_NOP); + lex = lex_next; + break; + } + case FDT_END_NODE: { + if (!last && node && cb->done) cb->done(node, cb->extra); + return lex + 1; + } + default: { // FDT_END + if (!last && node && cb->done) cb->done(node, cb->extra); + return lex; + } + } + } +} + +void fdt_scan(uintptr_t fdt, const struct fdt_cb *cb) +{ + struct fdt_header *header = (struct fdt_header *)fdt; + + // Only process FDT that we understand + if (bswap(header->magic) != FDT_MAGIC || + bswap(header->last_comp_version) > FDT_VERSION) return; + + const char *strings = (const char *)(fdt + bswap(header->off_dt_strings)); + uint32_t *lex = (uint32_t *)(fdt + bswap(header->off_dt_struct)); + + fdt_scan_helper(lex, strings, 0, cb); +} + +uint32_t fdt_size(uintptr_t fdt) +{ + struct fdt_header *header = (struct fdt_header *)fdt; + + // Only process FDT that we understand + if (bswap(header->magic) != FDT_MAGIC || + bswap(header->last_comp_version) > FDT_VERSION) return 0; + return bswap(header->totalsize); +} + +const uint32_t *fdt_get_address(const struct fdt_scan_node *node, const uint32_t *value, uint64_t *result) +{ + *result = 0; + for (int cells = node->address_cells; cells > 0; --cells) + *result = (*result << 32) + bswap(*value++); + return value; +} + +const uint32_t *fdt_get_size(const struct fdt_scan_node *node, const uint32_t *value, uint64_t *result) +{ + *result = 0; + for (int cells = node->size_cells; cells > 0; --cells) + *result = (*result << 32) + bswap(*value++); + return value; +} + +int fdt_string_list_index(const struct fdt_scan_prop *prop, const char *str) +{ + const char *list = (const char *)prop->value; + const char *end = list + prop->len; + int index = 0; + while (end - list > 0) { + if (!strcmp(list, str)) return index; + ++index; + list += strlen(list) + 1; + } + return -1; +} + +//////////////////////////////////////////// MEMORY SCAN ///////////////////////////////////////// + +struct mem_scan { + int memory; + const uint32_t *reg_value; + int reg_len; +}; + +static void mem_open(const struct fdt_scan_node *node, void *extra) +{ + struct mem_scan *scan = (struct mem_scan *)extra; + memset(scan, 0, sizeof(*scan)); +} + +static void mem_prop(const struct fdt_scan_prop *prop, void *extra) +{ + struct mem_scan *scan = (struct mem_scan *)extra; + if (!strcmp(prop->name, "device_type") && !strcmp((const char*)prop->value, "memory")) { + scan->memory = 1; + } else if (!strcmp(prop->name, "reg")) { + scan->reg_value = prop->value; + scan->reg_len = prop->len; + } +} + +static void mem_done(const struct fdt_scan_node *node, void *extra) +{ + struct mem_scan *scan = (struct mem_scan *)extra; + const uint32_t *value = scan->reg_value; + const uint32_t *end = value + scan->reg_len/4; + uintptr_t self = (uintptr_t)mem_done; + + if (!scan->memory) return; + assert (scan->reg_value && scan->reg_len % 4 == 0); + + while (end - value > 0) { + uint64_t base, size; + value = fdt_get_address(node->parent, value, &base); + value = fdt_get_size (node->parent, value, &size); + if (base <= self && self <= base + size) { mem_size = size; } + } + assert (end == value); +} + +void query_mem(uintptr_t fdt) +{ + struct fdt_cb cb; + struct mem_scan scan; + + memset(&cb, 0, sizeof(cb)); + cb.open = mem_open; + cb.prop = mem_prop; + cb.done = mem_done; + cb.extra = &scan; + + mem_size = 0; + fdt_scan(fdt, &cb); + assert (mem_size > 0); +} + +///////////////////////////////////////////// HART SCAN ////////////////////////////////////////// + +static uint32_t hart_phandles[MAX_HARTS]; +uint64_t hart_mask; + +struct hart_scan { + const struct fdt_scan_node *cpu; + int hart; + const struct fdt_scan_node *controller; + int cells; + uint32_t phandle; +}; + +static void hart_open(const struct fdt_scan_node *node, void *extra) +{ + struct hart_scan *scan = (struct hart_scan *)extra; + if (!scan->cpu) { + scan->hart = -1; + } + if (!scan->controller) { + scan->cells = 0; + scan->phandle = 0; + } +} + +static void hart_prop(const struct fdt_scan_prop *prop, void *extra) +{ + struct hart_scan *scan = (struct hart_scan *)extra; + if (!strcmp(prop->name, "device_type") && !strcmp((const char*)prop->value, "cpu")) { + assert (!scan->cpu); + scan->cpu = prop->node; + } else if (!strcmp(prop->name, "interrupt-controller")) { + assert (!scan->controller); + scan->controller = prop->node; + } else if (!strcmp(prop->name, "#interrupt-cells")) { + scan->cells = bswap(prop->value[0]); + } else if (!strcmp(prop->name, "phandle")) { + scan->phandle = bswap(prop->value[0]); + } else if (!strcmp(prop->name, "reg")) { + uint64_t reg; + fdt_get_address(prop->node->parent, prop->value, ®); + scan->hart = reg; + } +} + +static void hart_done(const struct fdt_scan_node *node, void *extra) +{ + struct hart_scan *scan = (struct hart_scan *)extra; + + if (scan->cpu == node) { + assert (scan->hart >= 0); + } + + if (scan->controller == node && scan->cpu) { + assert (scan->phandle > 0); + assert (scan->cells == 1); + + if (scan->hart < MAX_HARTS) { + hart_phandles[scan->hart] = scan->phandle; + hart_mask |= 1 << scan->hart; + hls_init(scan->hart); + } + } +} + +static int hart_close(const struct fdt_scan_node *node, void *extra) +{ + struct hart_scan *scan = (struct hart_scan *)extra; + if (scan->cpu == node) scan->cpu = 0; + if (scan->controller == node) scan->controller = 0; + return 0; +} + +void query_harts(uintptr_t fdt) +{ + struct fdt_cb cb; + struct hart_scan scan; + + memset(&cb, 0, sizeof(cb)); + memset(&scan, 0, sizeof(scan)); + cb.open = hart_open; + cb.prop = hart_prop; + cb.done = hart_done; + cb.close= hart_close; + cb.extra = &scan; + + fdt_scan(fdt, &cb); + + // The current hart should have been detected + assert ((hart_mask >> read_csr(mhartid)) != 0); +} + +///////////////////////////////////////////// CLINT SCAN ///////////////////////////////////////// + +struct clint_scan +{ + int compat; + uint64_t reg; + const uint32_t *int_value; + int int_len; + int done; +}; + +static void clint_open(const struct fdt_scan_node *node, void *extra) +{ + struct clint_scan *scan = (struct clint_scan *)extra; + scan->compat = 0; + scan->reg = 0; + scan->int_value = 0; +} + +static void clint_prop(const struct fdt_scan_prop *prop, void *extra) +{ + struct clint_scan *scan = (struct clint_scan *)extra; + if (!strcmp(prop->name, "compatible") && fdt_string_list_index(prop, "riscv,clint0") >= 0) { + scan->compat = 1; + } else if (!strcmp(prop->name, "reg")) { + fdt_get_address(prop->node->parent, prop->value, &scan->reg); + } else if (!strcmp(prop->name, "interrupts-extended")) { + scan->int_value = prop->value; + scan->int_len = prop->len; + } +} + +static void clint_done(const struct fdt_scan_node *node, void *extra) +{ + struct clint_scan *scan = (struct clint_scan *)extra; + const uint32_t *value = scan->int_value; + const uint32_t *end = value + scan->int_len/4; + + if (!scan->compat) return; + assert (scan->reg != 0); + assert (scan->int_value && scan->int_len % 16 == 0); + assert (!scan->done); // only one clint + + scan->done = 1; + mtime = (void*)((uintptr_t)scan->reg + 0xbff8); + + for (int index = 0; end - value > 0; ++index) { + uint32_t phandle = bswap(value[0]); + int hart; + for (hart = 0; hart < MAX_HARTS; ++hart) + if (hart_phandles[hart] == phandle) + break; + if (hart < MAX_HARTS) { + hls_t *hls = OTHER_HLS(hart); + hls->ipi = (void*)((uintptr_t)scan->reg + index * 4); + hls->timecmp = (void*)((uintptr_t)scan->reg + 0x4000 + (index * 8)); + } + value += 4; + } +} + +void query_clint(uintptr_t fdt) +{ + struct fdt_cb cb; + struct clint_scan scan; + + memset(&cb, 0, sizeof(cb)); + cb.open = clint_open; + cb.prop = clint_prop; + cb.done = clint_done; + cb.extra = &scan; + + scan.done = 0; + fdt_scan(fdt, &cb); + assert (scan.done); +} + +///////////////////////////////////////////// PLIC SCAN ///////////////////////////////////////// + +struct plic_scan +{ + int compat; + uint64_t reg; + uint32_t *int_value; + int int_len; + int done; + int ndev; +}; + +static void plic_open(const struct fdt_scan_node *node, void *extra) +{ + struct plic_scan *scan = (struct plic_scan *)extra; + scan->compat = 0; + scan->reg = 0; + scan->int_value = 0; +} + +static void plic_prop(const struct fdt_scan_prop *prop, void *extra) +{ + struct plic_scan *scan = (struct plic_scan *)extra; + if (!strcmp(prop->name, "compatible") && fdt_string_list_index(prop, "riscv,plic0") >= 0) { + scan->compat = 1; + } else if (!strcmp(prop->name, "reg")) { + fdt_get_address(prop->node->parent, prop->value, &scan->reg); + } else if (!strcmp(prop->name, "interrupts-extended")) { + scan->int_value = prop->value; + scan->int_len = prop->len; + } else if (!strcmp(prop->name, "riscv,ndev")) { + scan->ndev = bswap(prop->value[0]); + } +} + +#define HART_BASE 0x200000 +#define HART_SIZE 0x1000 +#define ENABLE_BASE 0x2000 +#define ENABLE_SIZE 0x80 + +static void plic_done(const struct fdt_scan_node *node, void *extra) +{ + struct plic_scan *scan = (struct plic_scan *)extra; + const uint32_t *value = scan->int_value; + const uint32_t *end = value + scan->int_len/4; + + if (!scan->compat) return; + assert (scan->reg != 0); + assert (scan->int_value && scan->int_len % 8 == 0); + assert (scan->ndev >= 0 && scan->ndev < 1024); + assert (!scan->done); // only one plic + + scan->done = 1; + plic_priorities = (uint32_t*)(uintptr_t)scan->reg; + plic_ndevs = scan->ndev; + + for (int index = 0; end - value > 0; ++index) { + uint32_t phandle = bswap(value[0]); + uint32_t cpu_int = bswap(value[1]); + int hart; + for (hart = 0; hart < MAX_HARTS; ++hart) + if (hart_phandles[hart] == phandle) + break; + if (hart < MAX_HARTS) { + hls_t *hls = OTHER_HLS(hart); + if (cpu_int == IRQ_M_EXT) { + hls->plic_m_ie = (uintptr_t*)((uintptr_t)scan->reg + ENABLE_BASE + ENABLE_SIZE * index); + hls->plic_m_thresh = (uint32_t*) ((uintptr_t)scan->reg + HART_BASE + HART_SIZE * index); + } else if (cpu_int == IRQ_S_EXT) { + hls->plic_s_ie = (uintptr_t*)((uintptr_t)scan->reg + ENABLE_BASE + ENABLE_SIZE * index); + hls->plic_s_thresh = (uint32_t*) ((uintptr_t)scan->reg + HART_BASE + HART_SIZE * index); + } else { + printm("PLIC wired hart %d to wrong interrupt %d", hart, cpu_int); + } + } + value += 2; + } +#if 0 + printm("PLIC: prio %x devs %d\r\n", (uint32_t)(uintptr_t)plic_priorities, plic_ndevs); + for (int i = 0; i < MAX_HARTS; ++i) { + hls_t *hls = OTHER_HLS(i); + printm("CPU %d: %x %x %x %x\r\n", i, (uint32_t)(uintptr_t)hls->plic_m_ie, (uint32_t)(uintptr_t)hls->plic_m_thresh, (uint32_t)(uintptr_t)hls->plic_s_ie, (uint32_t)(uintptr_t)hls->plic_s_thresh); + } +#endif +} + +void query_plic(uintptr_t fdt) +{ + struct fdt_cb cb; + struct plic_scan scan; + + memset(&cb, 0, sizeof(cb)); + cb.open = plic_open; + cb.prop = plic_prop; + cb.done = plic_done; + cb.extra = &scan; + + scan.done = 0; + fdt_scan(fdt, &cb); +} + +static void plic_redact(const struct fdt_scan_node *node, void *extra) +{ + struct plic_scan *scan = (struct plic_scan *)extra; + uint32_t *value = scan->int_value; + uint32_t *end = value + scan->int_len/4; + + if (!scan->compat) return; + scan->done = 1; + + while (end - value > 0) { + if (bswap(value[1]) == IRQ_M_EXT) value[1] = bswap(-1); + value += 2; + } +} + +void filter_plic(uintptr_t fdt) +{ + struct fdt_cb cb; + struct plic_scan scan; + + memset(&cb, 0, sizeof(cb)); + cb.open = plic_open; + cb.prop = plic_prop; + cb.done = plic_redact; + cb.extra = &scan; + + scan.done = 0; + fdt_scan(fdt, &cb); +} + +//////////////////////////////////////////// COMPAT SCAN //////////////////////////////////////// + +struct compat_scan +{ + const char *compat; + int depth; + int kill; +}; + +static void compat_open(const struct fdt_scan_node *node, void *extra) +{ + struct compat_scan *scan = (struct compat_scan *)extra; + ++scan->depth; +} + +static void compat_prop(const struct fdt_scan_prop *prop, void *extra) +{ + struct compat_scan *scan = (struct compat_scan *)extra; + if (!strcmp(prop->name, "compatible") && fdt_string_list_index(prop, scan->compat) >= 0) + if (scan->depth < scan->kill) + scan->kill = scan->depth; +} + +static int compat_close(const struct fdt_scan_node *node, void *extra) +{ + struct compat_scan *scan = (struct compat_scan *)extra; + if (scan->kill == scan->depth--) { + scan->kill = 999; + return -1; + } else { + return 0; + } +} + +void filter_compat(uintptr_t fdt, const char *compat) +{ + struct fdt_cb cb; + struct compat_scan scan; + + memset(&cb, 0, sizeof(cb)); + cb.open = compat_open; + cb.prop = compat_prop; + cb.close = compat_close; + cb.extra = &scan; + + scan.compat = compat; + scan.depth = 0; + scan.kill = 999; + fdt_scan(fdt, &cb); +} + +//////////////////////////////////////////// HART FILTER //////////////////////////////////////// + +struct hart_filter { + int compat; + int hart; + char *status; + char *mmu_type; + long *disabled_hart_mask; +}; + +static void hart_filter_open(const struct fdt_scan_node *node, void *extra) +{ + struct hart_filter *filter = (struct hart_filter *)extra; + filter->status = NULL; + filter->mmu_type = NULL; + filter->compat = 0; + filter->hart = -1; +} + +static void hart_filter_prop(const struct fdt_scan_prop *prop, void *extra) +{ + struct hart_filter *filter = (struct hart_filter *)extra; + if (!strcmp(prop->name, "device_type") && !strcmp((const char*)prop->value, "cpu")) { + filter->compat = 1; + } else if (!strcmp(prop->name, "reg")) { + uint64_t reg; + fdt_get_address(prop->node->parent, prop->value, ®); + filter->hart = reg; + } else if (!strcmp(prop->name, "status")) { + filter->status = (char*)prop->value; + } else if (!strcmp(prop->name, "mmu-type")) { + filter->mmu_type = (char*)prop->value; + } +} + +static bool hart_filter_mask(const struct hart_filter *filter) +{ + if (filter->mmu_type == NULL) return true; + if (strcmp(filter->status, "okay")) return true; + if (!strcmp(filter->mmu_type, "riscv,sv39")) return false; + if (!strcmp(filter->mmu_type, "riscv,sv48")) return false; + printm("hart_filter_mask saw unknown hart type: status=\"%s\", mmu_type=\"%s\"\n", + filter->status, filter->mmu_type); + return true; +} + +static void hart_filter_done(const struct fdt_scan_node *node, void *extra) +{ + struct hart_filter *filter = (struct hart_filter *)extra; + + if (!filter->compat) return; + assert (filter->status); + assert (filter->hart >= 0); + + if (hart_filter_mask(filter)) { + strcpy(filter->status, "masked"); + uint32_t *len = (uint32_t*)filter->status; + len[-2] = bswap(strlen("masked")+1); + *filter->disabled_hart_mask |= (1 << filter->hart); + } +} + +void filter_harts(uintptr_t fdt, long *disabled_hart_mask) +{ + struct fdt_cb cb; + struct hart_filter filter; + + memset(&cb, 0, sizeof(cb)); + cb.open = hart_filter_open; + cb.prop = hart_filter_prop; + cb.done = hart_filter_done; + cb.extra = &filter; + + filter.disabled_hart_mask = disabled_hart_mask; + *disabled_hart_mask = 0; + fdt_scan(fdt, &cb); +} + +//////////////////////////////////////////// PRINT ////////////////////////////////////////////// + +#ifdef PK_PRINT_DEVICE_TREE +#define FDT_PRINT_MAX_DEPTH 32 + +struct fdt_print_info { + int depth; + const struct fdt_scan_node *stack[FDT_PRINT_MAX_DEPTH]; +}; + +void fdt_print_printm(struct fdt_print_info *info, const char *format, ...) +{ + va_list vl; + + for (int i = 0; i < info->depth; ++i) + printm(" "); + + va_start(vl, format); + vprintm(format, vl); + va_end(vl); +} + +static void fdt_print_open(const struct fdt_scan_node *node, void *extra) +{ + struct fdt_print_info *info = (struct fdt_print_info *)extra; + + while (node->parent != NULL && info->stack[info->depth-1] != node->parent) { + info->depth--; + fdt_print_printm(info, "}\r\n"); + } + + fdt_print_printm(info, "%s {\r\n", node->name); + info->stack[info->depth] = node; + info->depth++; +} + +static void fdt_print_prop(const struct fdt_scan_prop *prop, void *extra) +{ + struct fdt_print_info *info = (struct fdt_print_info *)extra; + int asstring = 1; + char *char_data = (char *)(prop->value); + + fdt_print_printm(info, "%s", prop->name); + + if (prop->len == 0) { + printm(";\r\n"); + return; + } else { + printm(" = "); + } + + /* It appears that dtc uses a hueristic to detect strings so I'm using a + * similar one here. */ + for (int i = 0; i < prop->len; ++i) { + if (!isstring(char_data[i])) + asstring = 0; + if (i > 0 && char_data[i] == '\0' && char_data[i-1] == '\0') + asstring = 0; + } + + if (asstring) { + for (size_t i = 0; i < prop->len; i += strlen(char_data + i) + 1) { + if (i != 0) + printm(", "); + printm("\"%s\"", char_data + i); + } + } else { + printm("<"); + for (size_t i = 0; i < prop->len/4; ++i) { + if (i != 0) + printm(" "); + printm("0x%08x", bswap(prop->value[i])); + } + printm(">"); + } + + printm(";\r\n"); +} + +static void fdt_print_done(const struct fdt_scan_node *node, void *extra) +{ + struct fdt_print_info *info = (struct fdt_print_info *)extra; +} + +static int fdt_print_close(const struct fdt_scan_node *node, void *extra) +{ + struct fdt_print_info *info = (struct fdt_print_info *)extra; + return 0; +} + +void fdt_print(uintptr_t fdt) +{ + struct fdt_print_info info; + struct fdt_cb cb; + + info.depth = 0; + + memset(&cb, 0, sizeof(cb)); + cb.open = fdt_print_open; + cb.prop = fdt_print_prop; + cb.done = fdt_print_done; + cb.close = fdt_print_close; + cb.extra = &info; + + fdt_scan(fdt, &cb); + + while (info.depth > 0) { + info.depth--; + fdt_print_printm(&info, "}\r\n"); + } +} +#endif diff --git a/riscv-pk/machine/fdt.h b/riscv-pk/machine/fdt.h new file mode 100644 index 0000000..d436778 --- /dev/null +++ b/riscv-pk/machine/fdt.h @@ -0,0 +1,76 @@ +#ifndef FDT_H +#define FDT_H + +#define FDT_MAGIC 0xd00dfeed +#define FDT_VERSION 17 + +struct fdt_header { + uint32_t magic; + uint32_t totalsize; + uint32_t off_dt_struct; + uint32_t off_dt_strings; + uint32_t off_mem_rsvmap; + uint32_t version; + uint32_t last_comp_version; /* <= 17 */ + uint32_t boot_cpuid_phys; + uint32_t size_dt_strings; + uint32_t size_dt_struct; +}; + +#define FDT_BEGIN_NODE 1 +#define FDT_END_NODE 2 +#define FDT_PROP 3 +#define FDT_NOP 4 +#define FDT_END 9 + +struct fdt_scan_node { + const struct fdt_scan_node *parent; + const char *name; + int address_cells; + int size_cells; +}; + +struct fdt_scan_prop { + const struct fdt_scan_node *node; + const char *name; + uint32_t *value; + int len; // in bytes of value +}; + +struct fdt_cb { + void (*open)(const struct fdt_scan_node *node, void *extra); + void (*prop)(const struct fdt_scan_prop *prop, void *extra); + void (*done)(const struct fdt_scan_node *node, void *extra); // last property was seen + int (*close)(const struct fdt_scan_node *node, void *extra); // -1 => delete the node + children + void *extra; +}; + +// Scan the contents of FDT +void fdt_scan(uintptr_t fdt, const struct fdt_cb *cb); +uint32_t fdt_size(uintptr_t fdt); + +// Extract fields +const uint32_t *fdt_get_address(const struct fdt_scan_node *node, const uint32_t *base, uint64_t *value); +const uint32_t *fdt_get_size(const struct fdt_scan_node *node, const uint32_t *base, uint64_t *value); +int fdt_string_list_index(const struct fdt_scan_prop *prop, const char *str); // -1 if not found + +// Setup memory+clint+plic +void query_mem(uintptr_t fdt); +void query_harts(uintptr_t fdt); +void query_plic(uintptr_t fdt); +void query_clint(uintptr_t fdt); + +// Remove information from FDT +void filter_harts(uintptr_t fdt, long *disabled_hart_mask); +void filter_plic(uintptr_t fdt); +void filter_compat(uintptr_t fdt, const char *compat); + +// The hartids of available harts +extern uint64_t hart_mask; + +#ifdef PK_PRINT_DEVICE_TREE +// Prints the device tree to the console as a DTS +void fdt_print(uintptr_t fdt); +#endif + +#endif diff --git a/riscv-pk/machine/finisher.c b/riscv-pk/machine/finisher.c new file mode 100644 index 0000000..d113096 --- /dev/null +++ b/riscv-pk/machine/finisher.c @@ -0,0 +1,58 @@ +#include +#include "finisher.h" +#include "fdt.h" + +volatile uint32_t* finisher; + +void finisher_exit(uint16_t code) +{ + if (!finisher) return; + if (code == 0) { + *finisher = FINISHER_PASS; + } else { + *finisher = code << 16 | FINISHER_FAIL; + } +} + +struct finisher_scan +{ + int compat; + uint64_t reg; +}; + +static void finisher_open(const struct fdt_scan_node *node, void *extra) +{ + struct finisher_scan *scan = (struct finisher_scan *)extra; + memset(scan, 0, sizeof(*scan)); +} + +static void finisher_prop(const struct fdt_scan_prop *prop, void *extra) +{ + struct finisher_scan *scan = (struct finisher_scan *)extra; + if (!strcmp(prop->name, "compatible") && !strcmp((const char*)prop->value, "sifive,test0")) { + scan->compat = 1; + } else if (!strcmp(prop->name, "reg")) { + fdt_get_address(prop->node->parent, prop->value, &scan->reg); + } +} + +static void finisher_done(const struct fdt_scan_node *node, void *extra) +{ + struct finisher_scan *scan = (struct finisher_scan *)extra; + if (!scan->compat || !scan->reg || finisher) return; + finisher = (uint32_t*)(uintptr_t)scan->reg; +} + +void query_finisher(uintptr_t fdt) +{ + struct fdt_cb cb; + struct finisher_scan scan; + + memset(&cb, 0, sizeof(cb)); + cb.open = finisher_open; + cb.prop = finisher_prop; + cb.done = finisher_done; + cb.extra = &scan; + + fdt_scan(fdt, &cb); +} diff --git a/riscv-pk/machine/finisher.h b/riscv-pk/machine/finisher.h new file mode 100644 index 0000000..60d10b4 --- /dev/null +++ b/riscv-pk/machine/finisher.h @@ -0,0 +1,13 @@ +#ifndef _RISCV_FINISHER_H +#define _RISCV_FINISHER_H + +#include + +#define FINISHER_REG_FINISH 0 +#define FINISHER_FAIL 0x3333 +#define FINISHER_PASS 0x5555 + +void finisher_exit(uint16_t code); +void query_finisher(uintptr_t fdt); + +#endif diff --git a/riscv-pk/machine/flush_icache.c b/riscv-pk/machine/flush_icache.c new file mode 100644 index 0000000..45ba204 --- /dev/null +++ b/riscv-pk/machine/flush_icache.c @@ -0,0 +1,3 @@ +void __riscv_flush_icache(void) { + __asm__ volatile ("fence.i"); +} diff --git a/riscv-pk/machine/htif.c b/riscv-pk/machine/htif.c new file mode 100644 index 0000000..44ec2dd --- /dev/null +++ b/riscv-pk/machine/htif.c @@ -0,0 +1,138 @@ +#include "htif.h" +#include "atomic.h" +#include "mtrap.h" +#include "fdt.h" +#include + +extern uint64_t __htif_base; +volatile uint64_t tohost __attribute__((section(".htif"))); +volatile uint64_t fromhost __attribute__((section(".htif"))); +volatile int htif_console_buf; +static spinlock_t htif_lock = SPINLOCK_INIT; +uintptr_t htif; + +#define TOHOST(base_int) (uint64_t *)(base_int + TOHOST_OFFSET) +#define FROMHOST(base_int) (uint64_t *)(base_int + FROMHOST_OFFSET) + +#define TOHOST_OFFSET ((uintptr_t)tohost - (uintptr_t)__htif_base) +#define FROMHOST_OFFSET ((uintptr_t)fromhost - (uintptr_t)__htif_base) + +static void __check_fromhost() +{ + uint64_t fh = fromhost; + if (!fh) + return; + fromhost = 0; + + // this should be from the console + assert(FROMHOST_DEV(fh) == 1); + switch (FROMHOST_CMD(fh)) { + case 0: + htif_console_buf = 1 + (uint8_t)FROMHOST_DATA(fh); + break; + case 1: + break; + default: + assert(0); + } +} + +static void __set_tohost(uintptr_t dev, uintptr_t cmd, uintptr_t data) +{ + while (tohost) + __check_fromhost(); + tohost = TOHOST_CMD(dev, cmd, data); +} + +int htif_console_getchar() +{ + spinlock_lock(&htif_lock); + __check_fromhost(); + int ch = htif_console_buf; + if (ch >= 0) { + htif_console_buf = -1; + __set_tohost(1, 0, 0); + } + spinlock_unlock(&htif_lock); + + return ch - 1; +} + +static void do_tohost_fromhost(uintptr_t dev, uintptr_t cmd, uintptr_t data) +{ + spinlock_lock(&htif_lock); + __set_tohost(dev, cmd, data); + + while (1) { + uint64_t fh = fromhost; + if (fh) { + if (FROMHOST_DEV(fh) == dev && FROMHOST_CMD(fh) == cmd) { + fromhost = 0; + break; + } + __check_fromhost(); + } + } + spinlock_unlock(&htif_lock); +} + +void htif_syscall(uintptr_t arg) +{ + do_tohost_fromhost(0, 0, arg); +} + +void htif_console_putchar(uint8_t ch) +{ + spinlock_lock(&htif_lock); + __set_tohost(1, 1, ch); + spinlock_unlock(&htif_lock); +} + +void htif_poweroff() +{ + while (1) { + fromhost = 0; + tohost = 1; + } +} + +struct htif_scan +{ + int compat; +}; + +static void htif_open(const struct fdt_scan_node *node, void *extra) +{ + struct htif_scan *scan = (struct htif_scan *)extra; + memset(scan, 0, sizeof(*scan)); +} + +static void htif_prop(const struct fdt_scan_prop *prop, void *extra) +{ + struct htif_scan *scan = (struct htif_scan *)extra; + if (!strcmp(prop->name, "compatible") && !strcmp((const char*)prop->value, "ucb,htif0")) { + scan->compat = 1; + } +} + +static void htif_done(const struct fdt_scan_node *node, void *extra) +{ + struct htif_scan *scan = (struct htif_scan *)extra; + if (!scan->compat) return; + + htif = 1; +} + +void query_htif(uintptr_t fdt) +{ + struct fdt_cb cb; + struct htif_scan scan; + + memset(&cb, 0, sizeof(cb)); + cb.open = htif_open; + cb.prop = htif_prop; + cb.done = htif_done; + cb.extra = &scan; + + fdt_scan(fdt, &cb); +} diff --git a/riscv-pk/machine/htif.h b/riscv-pk/machine/htif.h new file mode 100644 index 0000000..a96bf60 --- /dev/null +++ b/riscv-pk/machine/htif.h @@ -0,0 +1,25 @@ +#ifndef _RISCV_HTIF_H +#define _RISCV_HTIF_H + +#include + +#if __riscv_xlen == 64 +# define TOHOST_CMD(dev, cmd, payload) \ + (((uint64_t)(dev) << 56) | ((uint64_t)(cmd) << 48) | (uint64_t)(payload)) +#else +# define TOHOST_CMD(dev, cmd, payload) ({ \ + if ((dev) || (cmd)) __builtin_trap(); \ + (payload); }) +#endif +#define FROMHOST_DEV(fromhost_value) ((uint64_t)(fromhost_value) >> 56) +#define FROMHOST_CMD(fromhost_value) ((uint64_t)(fromhost_value) << 8 >> 56) +#define FROMHOST_DATA(fromhost_value) ((uint64_t)(fromhost_value) << 16 >> 16) + +extern uintptr_t htif; +void query_htif(uintptr_t dtb); +void htif_console_putchar(uint8_t); +int htif_console_getchar(); +void htif_poweroff() __attribute__((noreturn)); +void htif_syscall(uintptr_t); + +#endif diff --git a/riscv-pk/machine/machine.ac b/riscv-pk/machine/machine.ac new file mode 100644 index 0000000..65acf04 --- /dev/null +++ b/riscv-pk/machine/machine.ac @@ -0,0 +1,4 @@ +AC_ARG_ENABLE([fp-emulation], AS_HELP_STRING([--disable-fp-emulation], [Disable floating-point emulation])) +AS_IF([test "x$enable_fp_emulation" != "xno"], [ + AC_DEFINE([PK_ENABLE_FP_EMULATION],,[Define if floating-point emulation is enabled]) +]) diff --git a/riscv-pk/machine/machine.mk.in b/riscv-pk/machine/machine.mk.in new file mode 100644 index 0000000..6745fdd --- /dev/null +++ b/riscv-pk/machine/machine.mk.in @@ -0,0 +1,30 @@ +machine_hdrs = \ + atomic.h \ + bits.h \ + fdt.h \ + emulation.h \ + encoding.h \ + htif.h \ + mcall.h \ + mtrap.h \ + uart.h \ + uart16550.h \ + finisher.h \ + unprivileged_memory.h \ + vm.h \ + +machine_c_srcs = \ + fdt.c \ + mtrap.c \ + minit.c \ + htif.c \ + emulation.c \ + muldiv_emulation.c \ + uart.c \ + uart16550.c \ + finisher.c \ + misaligned_ldst.c \ + flush_icache.c \ + +machine_asm_srcs = \ + mentry.S \ diff --git a/riscv-pk/machine/mcall.h b/riscv-pk/machine/mcall.h new file mode 100644 index 0000000..6a2c037 --- /dev/null +++ b/riscv-pk/machine/mcall.h @@ -0,0 +1,14 @@ +#ifndef _RISCV_SBI_H +#define _RISCV_SBI_H + +#define SBI_SET_TIMER 0 +#define SBI_CONSOLE_PUTCHAR 1 +#define SBI_CONSOLE_GETCHAR 2 +#define SBI_CLEAR_IPI 3 +#define SBI_SEND_IPI 4 +#define SBI_REMOTE_FENCE_I 5 +#define SBI_REMOTE_SFENCE_VMA 6 +#define SBI_REMOTE_SFENCE_VMA_ASID 7 +#define SBI_SHUTDOWN 8 + +#endif diff --git a/riscv-pk/machine/mentry.S b/riscv-pk/machine/mentry.S new file mode 100644 index 0000000..41d7017 --- /dev/null +++ b/riscv-pk/machine/mentry.S @@ -0,0 +1,295 @@ +// See LICENSE for license details. + +#include "mtrap.h" +#include "bits.h" + + .data + .align 6 +trap_table: +#define BAD_TRAP_VECTOR 0 + .word bad_trap + .word pmp_trap + .word illegal_insn_trap + .word bad_trap + .word misaligned_load_trap + .word pmp_trap + .word misaligned_store_trap + .word pmp_trap + .word bad_trap + .word mcall_trap + .word bad_trap + .word bad_trap + .word bad_trap +#define TRAP_FROM_MACHINE_MODE_VECTOR 13 + .word __trap_from_machine_mode + .word bad_trap + .word bad_trap + + .option norvc + .section .text.init,"ax",@progbits + .globl reset_vector +reset_vector: + j do_reset + +trap_vector: + csrrw sp, mscratch, sp + beqz sp, .Ltrap_from_machine_mode + + STORE a0, 10*REGBYTES(sp) + STORE a1, 11*REGBYTES(sp) + + csrr a1, mcause + bgez a1, .Lhandle_trap_in_machine_mode + + # This is an interrupt. Discard the mcause MSB and decode the rest. + sll a1, a1, 1 + + # Is it a machine timer interrupt? + li a0, IRQ_M_TIMER * 2 + bne a0, a1, 1f + + # Yes. Simply clear MSIE and raise SSIP. + li a0, MIP_MTIP + csrc mie, a0 + li a0, MIP_STIP + csrs mip, a0 + +.Lmret: + # Go back whence we came. + LOAD a0, 10*REGBYTES(sp) + LOAD a1, 11*REGBYTES(sp) + csrrw sp, mscratch, sp + mret + +1: + # Is it an IPI? + li a0, IRQ_M_SOFT * 2 + bne a0, a1, .Lbad_trap + + # Yes. First, clear the MIPI bit. + LOAD a0, MENTRY_IPI_OFFSET(sp) + sw x0, (a0) + fence + + # Now, decode the cause(s). +#ifdef __riscv_atomic + addi a0, sp, MENTRY_IPI_PENDING_OFFSET + amoswap.w a0, x0, (a0) +#else + lw a0, MENTRY_IPI_PENDING_OFFSET(a0) + sw x0, MENTRY_IPI_PENDING_OFFSET(a0) +#endif + and a1, a0, IPI_SOFT + beqz a1, 1f + csrs mip, MIP_SSIP +1: + andi a1, a0, IPI_FENCE_I + beqz a1, 1f + fence.i +1: + andi a1, a0, IPI_SFENCE_VMA + beqz a1, 1f + sfence.vma +1: + j .Lmret + + +.Lhandle_trap_in_machine_mode: + # Preserve the registers. Compute the address of the trap handler. + STORE ra, 1*REGBYTES(sp) + STORE gp, 3*REGBYTES(sp) + STORE tp, 4*REGBYTES(sp) + STORE t0, 5*REGBYTES(sp) +1:auipc t0, %pcrel_hi(trap_table) # t0 <- %hi(trap_table) + STORE t1, 6*REGBYTES(sp) + sll t1, a1, 2 # t1 <- mcause << 2 + STORE t2, 7*REGBYTES(sp) + add t1, t0, t1 # t1 <- %hi(trap_table)[mcause] + STORE s0, 8*REGBYTES(sp) + LWU t1, %pcrel_lo(1b)(t1) # t1 <- trap_table[mcause] + STORE s1, 9*REGBYTES(sp) + mv a0, sp # a0 <- regs + STORE a2,12*REGBYTES(sp) + csrr a2, mepc # a2 <- mepc + STORE a3,13*REGBYTES(sp) + csrrw t0, mscratch, x0 # t0 <- user sp + STORE a4,14*REGBYTES(sp) + STORE a5,15*REGBYTES(sp) + STORE a6,16*REGBYTES(sp) + STORE a7,17*REGBYTES(sp) + STORE s2,18*REGBYTES(sp) + STORE s3,19*REGBYTES(sp) + STORE s4,20*REGBYTES(sp) + STORE s5,21*REGBYTES(sp) + STORE s6,22*REGBYTES(sp) + STORE s7,23*REGBYTES(sp) + STORE s8,24*REGBYTES(sp) + STORE s9,25*REGBYTES(sp) + STORE s10,26*REGBYTES(sp) + STORE s11,27*REGBYTES(sp) + STORE t3,28*REGBYTES(sp) + STORE t4,29*REGBYTES(sp) + STORE t5,30*REGBYTES(sp) + STORE t6,31*REGBYTES(sp) + STORE t0, 2*REGBYTES(sp) # sp + +#ifndef __riscv_flen + lw tp, (sp) # Move the emulated FCSR from x0's save slot into tp. +#endif + STORE x0, (sp) # Zero x0's save slot. + + # Invoke the handler. + jalr t1 + +#ifndef __riscv_flen + sw tp, (sp) # Move the emulated FCSR from tp into x0's save slot. +#endif + +restore_mscratch: + # Restore mscratch, so future traps will know they didn't come from M-mode. + csrw mscratch, sp + +restore_regs: + # Restore all of the registers. + LOAD ra, 1*REGBYTES(sp) + LOAD gp, 3*REGBYTES(sp) + LOAD tp, 4*REGBYTES(sp) + LOAD t0, 5*REGBYTES(sp) + LOAD t1, 6*REGBYTES(sp) + LOAD t2, 7*REGBYTES(sp) + LOAD s0, 8*REGBYTES(sp) + LOAD s1, 9*REGBYTES(sp) + LOAD a0,10*REGBYTES(sp) + LOAD a1,11*REGBYTES(sp) + LOAD a2,12*REGBYTES(sp) + LOAD a3,13*REGBYTES(sp) + LOAD a4,14*REGBYTES(sp) + LOAD a5,15*REGBYTES(sp) + LOAD a6,16*REGBYTES(sp) + LOAD a7,17*REGBYTES(sp) + LOAD s2,18*REGBYTES(sp) + LOAD s3,19*REGBYTES(sp) + LOAD s4,20*REGBYTES(sp) + LOAD s5,21*REGBYTES(sp) + LOAD s6,22*REGBYTES(sp) + LOAD s7,23*REGBYTES(sp) + LOAD s8,24*REGBYTES(sp) + LOAD s9,25*REGBYTES(sp) + LOAD s10,26*REGBYTES(sp) + LOAD s11,27*REGBYTES(sp) + LOAD t3,28*REGBYTES(sp) + LOAD t4,29*REGBYTES(sp) + LOAD t5,30*REGBYTES(sp) + LOAD t6,31*REGBYTES(sp) + LOAD sp, 2*REGBYTES(sp) + mret + +.Ltrap_from_machine_mode: + csrr sp, mscratch + addi sp, sp, -INTEGER_CONTEXT_SIZE + STORE a0,10*REGBYTES(sp) + STORE a1,11*REGBYTES(sp) + li a1, TRAP_FROM_MACHINE_MODE_VECTOR + j .Lhandle_trap_in_machine_mode + +.Lbad_trap: + li a1, BAD_TRAP_VECTOR + j .Lhandle_trap_in_machine_mode + + .globl __redirect_trap +__redirect_trap: + # reset sp to top of M-mode stack + li t0, MACHINE_STACK_SIZE + add sp, sp, t0 + neg t0, t0 + and sp, sp, t0 + addi sp, sp, -MENTRY_FRAME_SIZE + j restore_mscratch + +__trap_from_machine_mode: + jal trap_from_machine_mode + j restore_regs + +do_reset: + li x1, 0 + li x2, 0 + li x3, 0 + li x4, 0 + li x5, 0 + li x6, 0 + li x7, 0 + li x8, 0 + li x9, 0 +// save a0 and a1; arguments from previous boot loader stage: +// li x10, 0 +// li x11, 0 + li x12, 0 + li x13, 0 + li x14, 0 + li x15, 0 + li x16, 0 + li x17, 0 + li x18, 0 + li x19, 0 + li x20, 0 + li x21, 0 + li x22, 0 + li x23, 0 + li x24, 0 + li x25, 0 + li x26, 0 + li x27, 0 + li x28, 0 + li x29, 0 + li x30, 0 + li x31, 0 + csrw mscratch, x0 + + # write mtvec and make sure it sticks + la t0, trap_vector + csrw mtvec, t0 + csrr t1, mtvec +1:bne t0, t1, 1b + + la sp, stacks + RISCV_PGSIZE - MENTRY_FRAME_SIZE + + csrr a3, mhartid + slli a2, a3, RISCV_PGSHIFT + add sp, sp, a2 + + # Boot on the first hart + beqz a3, init_first_hart + + # set MSIE bit to receive IPI + li a2, MIP_MSIP + csrw mie, a2 + +.LmultiHart: +#if MAX_HARTS > 1 + # wait for an IPI to signal that it's safe to boot + wfi + + # masked harts never start + la a4, disabled_hart_mask + LOAD a4, 0(a4) + srl a4, a4, a3 + andi a4, a4, 1 + bnez a4, .LmultiHart + + # only start if mip is set + csrr a2, mip + andi a2, a2, MIP_MSIP + beqz a2, .LmultiHart + + # make sure our hart id is within a valid range + fence + li a2, MAX_HARTS + bltu a3, a2, init_other_hart +#endif + wfi + j .LmultiHart + + .bss + .align RISCV_PGSHIFT +stacks: + .skip RISCV_PGSIZE * MAX_HARTS diff --git a/riscv-pk/machine/minit.c b/riscv-pk/machine/minit.c new file mode 100644 index 0000000..7690341 --- /dev/null +++ b/riscv-pk/machine/minit.c @@ -0,0 +1,199 @@ +#include "mtrap.h" +#include "atomic.h" +#include "vm.h" +//#include "fp_emulation.h" +#include "bits.h" +#include "fdt.h" +#include "uart.h" +#include "uart16550.h" +#include "finisher.h" +#include "disabled_hart_mask.h" +#include "htif.h" +#include +#include + +pte_t* root_page_table; +uintptr_t mem_size; +volatile uint64_t* mtime; +volatile uint32_t* plic_priorities; +size_t plic_ndevs; + +static void mstatus_init() +{ + // Enable FPU + if (supports_extension('D') || supports_extension('F')) + write_csr(mstatus, MSTATUS_FS); + + // Enable user/supervisor use of perf counters + if (supports_extension('S')) + write_csr(scounteren, -1); + write_csr(mcounteren, -1); + + // Enable software interrupts + write_csr(mie, MIP_MSIP); + + // Disable paging + if (supports_extension('S')) + write_csr(sptbr, 0); +} + +// send S-mode interrupts and most exceptions straight to S-mode +static void delegate_traps() +{ + if (!supports_extension('S')) + return; + + uintptr_t interrupts = MIP_SSIP | MIP_STIP | MIP_SEIP; + uintptr_t exceptions = + (1U << CAUSE_MISALIGNED_FETCH) | + (1U << CAUSE_FETCH_PAGE_FAULT) | + (1U << CAUSE_BREAKPOINT) | + (1U << CAUSE_LOAD_PAGE_FAULT) | + (1U << CAUSE_STORE_PAGE_FAULT) | + (1U << CAUSE_USER_ECALL); + + write_csr(mideleg, interrupts); + write_csr(medeleg, exceptions); + assert(read_csr(mideleg) == interrupts); + assert(read_csr(medeleg) == exceptions); +} + +static void fp_init() +{ + if (!supports_extension('D') && !supports_extension('F')) + return; + + assert(read_csr(mstatus) & MSTATUS_FS); + +#ifdef __riscv_flen +// for (int i = 0; i < 32; i++) +// init_fp_reg(i); +// write_csr(fcsr, 0); +#else + uintptr_t fd_mask = (1 << ('F' - 'A')) | (1 << ('D' - 'A')); + clear_csr(misa, fd_mask); + assert(!(read_csr(misa) & fd_mask)); +#endif +} + +hls_t* hls_init(uintptr_t id) +{ + hls_t* hls = OTHER_HLS(id); + memset(hls, 0, sizeof(*hls)); + return hls; +} + +static void memory_init() +{ + mem_size = mem_size / MEGAPAGE_SIZE * MEGAPAGE_SIZE; +} + +static void hart_init() +{ + mstatus_init(); + fp_init(); + delegate_traps(); +} + +static void plic_init() +{ + for (size_t i = 1; i <= plic_ndevs; i++) + plic_priorities[i] = 1; +} + +static void prci_test() +{ + assert(!(read_csr(mip) & MIP_MSIP)); + *HLS()->ipi = 1; + assert(read_csr(mip) & MIP_MSIP); + *HLS()->ipi = 0; + + assert(!(read_csr(mip) & MIP_MTIP)); + *HLS()->timecmp = 0; + assert(read_csr(mip) & MIP_MTIP); + *HLS()->timecmp = -1ULL; +} + +static void hart_plic_init() +{ + // clear pending interrupts + *HLS()->ipi = 0; + *HLS()->timecmp = -1ULL; + write_csr(mip, 0); + + if (!plic_ndevs) + return; + + size_t ie_words = plic_ndevs / sizeof(uintptr_t) + 1; + for (size_t i = 0; i < ie_words; i++) + HLS()->plic_s_ie[i] = ULONG_MAX; + *HLS()->plic_m_thresh = 1; + *HLS()->plic_s_thresh = 0; +} + +static void wake_harts() +{ + for (int hart = 0; hart < MAX_HARTS; ++hart) + if ((((~disabled_hart_mask & hart_mask) >> hart) & 1)) + *OTHER_HLS(hart)->ipi = 1; // wakeup the hart +} + +void init_first_hart(uintptr_t hartid, uintptr_t dtb) +{ + // Confirm console as early as possible + query_uart(dtb); + query_uart16550(dtb); + query_htif(dtb); + + hart_init(); + hls_init(0); // this might get called again from parse_config_string + + // Find the power button early as well so die() works + query_finisher(dtb); + + query_mem(dtb); + query_harts(dtb); + query_clint(dtb); + query_plic(dtb); + + wake_harts(); + + plic_init(); + hart_plic_init(); + //prci_test(); + memory_init(); + boot_loader(dtb); +} + +void init_other_hart(uintptr_t hartid, uintptr_t dtb) +{ + hart_init(); + hart_plic_init(); + boot_other_hart(dtb); +} + +void enter_supervisor_mode(void (*fn)(uintptr_t), uintptr_t arg0, uintptr_t arg1) +{ + // Set up a PMP to permit access to all of memory. + // Ignore the illegal-instruction trap if PMPs aren't supported. + uintptr_t pmpc = PMP_NAPOT | PMP_R | PMP_W | PMP_X; + asm volatile ("la t0, 1f\n\t" + "csrrw t0, mtvec, t0\n\t" + "csrw pmpaddr0, %1\n\t" + "csrw pmpcfg0, %0\n\t" + ".align 2\n\t" + "1: csrw mtvec, t0" + : : "r" (pmpc), "r" (-1UL) : "t0"); + + uintptr_t mstatus = read_csr(mstatus); + mstatus = INSERT_FIELD(mstatus, MSTATUS_MPP, PRV_S); + mstatus = INSERT_FIELD(mstatus, MSTATUS_MPIE, 0); + write_csr(mstatus, mstatus); + write_csr(mscratch, MACHINE_STACK_TOP() - MENTRY_FRAME_SIZE); + write_csr(mepc, fn); + + register uintptr_t a0 asm ("a0") = arg0; + register uintptr_t a1 asm ("a1") = arg1; + asm volatile ("mret" : : "r" (a0), "r" (a1)); + __builtin_unreachable(); +} diff --git a/riscv-pk/machine/misaligned_ldst.c b/riscv-pk/machine/misaligned_ldst.c new file mode 100644 index 0000000..7b7425c --- /dev/null +++ b/riscv-pk/machine/misaligned_ldst.c @@ -0,0 +1,143 @@ +#include "emulation.h" +//#include "fp_emulation.h" +#include "unprivileged_memory.h" +#include "mtrap.h" +#include "config.h" +//#include "pk.h" + +union byte_array { + uint8_t bytes[8]; + uintptr_t intx; + uint64_t int64; +}; + +static inline int insn_len(long insn) +{ + return (insn & 0x3) < 0x3 ? 2 : 4; +} + +void misaligned_load_trap(uintptr_t* regs, uintptr_t mcause, uintptr_t mepc) +{ + union byte_array val; + uintptr_t mstatus; + insn_t insn = get_insn(mepc, &mstatus); + uintptr_t npc = mepc + insn_len(insn); + uintptr_t addr = read_csr(mbadaddr); + + int shift = 0, fp = 0, len; + if ((insn & MASK_LW) == MATCH_LW) + len = 4, shift = 8*(sizeof(uintptr_t) - len); +#if __riscv_xlen == 64 + else if ((insn & MASK_LD) == MATCH_LD) + len = 8, shift = 8*(sizeof(uintptr_t) - len); + else if ((insn & MASK_LWU) == MATCH_LWU) + len = 4; +#endif +#ifdef PK_ENABLE_FP_EMULATION + else if ((insn & MASK_FLD) == MATCH_FLD) + fp = 1, len = 8; + else if ((insn & MASK_FLW) == MATCH_FLW) + fp = 1, len = 4; +#endif + else if ((insn & MASK_LH) == MATCH_LH) + len = 2, shift = 8*(sizeof(uintptr_t) - len); + else if ((insn & MASK_LHU) == MATCH_LHU) + len = 2; +#ifdef __riscv_compressed +# if __riscv_xlen >= 64 + else if ((insn & MASK_C_LD) == MATCH_C_LD) + len = 8, shift = 8*(sizeof(uintptr_t) - len), insn = RVC_RS2S(insn) << SH_RD; + else if ((insn & MASK_C_LDSP) == MATCH_C_LDSP && ((insn >> SH_RD) & 0x1f)) + len = 8, shift = 8*(sizeof(uintptr_t) - len); +# endif + else if ((insn & MASK_C_LW) == MATCH_C_LW) + len = 4, shift = 8*(sizeof(uintptr_t) - len), insn = RVC_RS2S(insn) << SH_RD; + else if ((insn & MASK_C_LWSP) == MATCH_C_LWSP && ((insn >> SH_RD) & 0x1f)) + len = 4, shift = 8*(sizeof(uintptr_t) - len); +# ifdef PK_ENABLE_FP_EMULATION + else if ((insn & MASK_C_FLD) == MATCH_C_FLD) + fp = 1, len = 8, insn = RVC_RS2S(insn) << SH_RD; + else if ((insn & MASK_C_FLDSP) == MATCH_C_FLDSP) + fp = 1, len = 8; +# if __riscv_xlen == 32 + else if ((insn & MASK_C_FLW) == MATCH_C_FLW) + fp = 1, len = 4, insn = RVC_RS2S(insn) << SH_RD; + else if ((insn & MASK_C_FLWSP) == MATCH_C_FLWSP) + fp = 1, len = 4; +# endif +# endif +#endif + else + return truly_illegal_insn(regs, mcause, mepc, mstatus, insn); + + val.int64 = 0; + for (intptr_t i = 0; i < len; i++) + val.bytes[i] = load_uint8_t((void *)(addr + i), mepc); + + if (!fp) + SET_RD(insn, regs, (intptr_t)val.intx << shift >> shift); +#ifdef PK_ENABLE_FP_EMULATION + else if (len == 8) + SET_F64_RD(insn, regs, val.int64); + else + SET_F32_RD(insn, regs, val.intx); +#endif + write_csr(mepc, npc); +} + +void misaligned_store_trap(uintptr_t* regs, uintptr_t mcause, uintptr_t mepc) +{ + union byte_array val; + uintptr_t mstatus; + insn_t insn = get_insn(mepc, &mstatus); + uintptr_t npc = mepc + insn_len(insn); + int len; + + val.intx = GET_RS2(insn, regs); + if ((insn & MASK_SW) == MATCH_SW) + len = 4; +#if __riscv_xlen == 64 + else if ((insn & MASK_SD) == MATCH_SD) + len = 8; +#endif +#ifdef PK_ENABLE_FP_EMULATION + else if ((insn & MASK_FSD) == MATCH_FSD) + len = 8, val.int64 = GET_F64_RS2(insn, regs); + else if ((insn & MASK_FSW) == MATCH_FSW) + len = 4, val.intx = GET_F32_RS2(insn, regs); +#endif + else if ((insn & MASK_SH) == MATCH_SH) + len = 2; +#ifdef __riscv_compressed +# if __riscv_xlen >= 64 + else if ((insn & MASK_C_SD) == MATCH_C_SD) + len = 8, val.intx = GET_RS2S(insn, regs); + else if ((insn & MASK_C_SDSP) == MATCH_C_SDSP && ((insn >> SH_RD) & 0x1f)) + len = 8, val.intx = GET_RS2C(insn, regs); +# endif + else if ((insn & MASK_C_SW) == MATCH_C_SW) + len = 4, val.intx = GET_RS2S(insn, regs); + else if ((insn & MASK_C_SWSP) == MATCH_C_SWSP && ((insn >> SH_RD) & 0x1f)) + len = 4, val.intx = GET_RS2C(insn, regs); +# ifdef PK_ENABLE_FP_EMULATION + else if ((insn & MASK_C_FSD) == MATCH_C_FSD) + len = 8, val.int64 = GET_F64_RS2S(insn, regs); + else if ((insn & MASK_C_FSDSP) == MATCH_C_FSDSP) + len = 8, val.int64 = GET_F64_RS2C(insn, regs); +# if __riscv_xlen == 32 + else if ((insn & MASK_C_FSW) == MATCH_C_FSW) + len = 4, val.intx = GET_F32_RS2S(insn, regs); + else if ((insn & MASK_C_FSWSP) == MATCH_C_FSWSP) + len = 4, val.intx = GET_F32_RS2C(insn, regs); +# endif +# endif +#endif + else + return truly_illegal_insn(regs, mcause, mepc, mstatus, insn); + + uintptr_t addr = read_csr(mbadaddr); + for (int i = 0; i < len; i++) + store_uint8_t((void *)(addr + i), val.bytes[i], mepc); + + write_csr(mepc, npc); +} diff --git a/riscv-pk/machine/mtrap.c b/riscv-pk/machine/mtrap.c new file mode 100644 index 0000000..61d0c7b --- /dev/null +++ b/riscv-pk/machine/mtrap.c @@ -0,0 +1,235 @@ +#include "mtrap.h" +#include "mcall.h" +#include "htif.h" +#include "atomic.h" +#include "bits.h" +#include "vm.h" +#include "uart.h" +#include "uart16550.h" +#include "finisher.h" +#include "fdt.h" +#include "unprivileged_memory.h" +#include "disabled_hart_mask.h" +#include +#include +#include + +void __attribute__((noreturn)) bad_trap(uintptr_t* regs, uintptr_t dummy, uintptr_t mepc) +{ + die("machine mode: unhandlable trap %d @ %p", read_csr(mcause), mepc); +} + +static uintptr_t mcall_console_putchar(uint8_t ch) +{ + if (uart) { + uart_putchar(ch); + } else if (uart16550) { + uart16550_putchar(ch); + } else if (htif) { + htif_console_putchar(ch); + } + return 0; +} + +void poweroff(uint16_t code) +{ + printm("Power off\n"); + finisher_exit(code); + if (htif) { + htif_poweroff(); + } else { + while (1) { asm volatile ("#noop\n"); } + } +} + +void putstring(const char* s) +{ + while (*s) + mcall_console_putchar(*s++); +} + +void vprintm(const char* s, va_list vl) +{ + char buf[256]; + vsnprintf(buf, sizeof buf, s, vl); + putstring(buf); +} + +void printm(const char* s, ...) +{ + va_list vl; + + va_start(vl, s); + vprintm(s, vl); + va_end(vl); +} + +static void send_ipi(uintptr_t recipient, int event) +{ + if (((disabled_hart_mask >> recipient) & 1)) return; + atomic_or(&OTHER_HLS(recipient)->mipi_pending, event); + mb(); + *OTHER_HLS(recipient)->ipi = 1; +} + +static uintptr_t mcall_console_getchar() +{ + if (uart) { + return uart_getchar(); + } else if (uart16550) { + return uart16550_getchar(); + } else if (htif) { + return htif_console_getchar(); + } else { + return '\0'; + } +} + +static uintptr_t mcall_clear_ipi() +{ + return clear_csr(mip, MIP_SSIP) & MIP_SSIP; +} + +static uintptr_t mcall_shutdown() +{ + poweroff(0); +} + +static uintptr_t mcall_set_timer(uint64_t when) +{ + *HLS()->timecmp = when; + clear_csr(mip, MIP_STIP); + set_csr(mie, MIP_MTIP); + return 0; +} + +static void send_ipi_many(uintptr_t* pmask, int event) +{ + _Static_assert(MAX_HARTS <= 8 * sizeof(*pmask), "# harts > uintptr_t bits"); + uintptr_t mask = hart_mask; + if (pmask) + mask &= load_uintptr_t(pmask, read_csr(mepc)); + + // send IPIs to everyone + for (uintptr_t i = 0, m = mask; m; i++, m >>= 1) + if (m & 1) + send_ipi(i, event); + + if (event == IPI_SOFT) + return; + + // wait until all events have been handled. + // prevent deadlock by consuming incoming IPIs. + uint32_t incoming_ipi = 0; + for (uintptr_t i = 0, m = mask; m; i++, m >>= 1) + if (m & 1) + while (*OTHER_HLS(i)->ipi) + incoming_ipi |= atomic_swap(HLS()->ipi, 0); + + // if we got an IPI, restore it; it will be taken after returning + if (incoming_ipi) { + *HLS()->ipi = incoming_ipi; + mb(); + } +} + +void redirect_trap(uintptr_t epc, uintptr_t mstatus, uintptr_t badaddr); + + +void mcall_trap(uintptr_t* regs, uintptr_t mcause, uintptr_t mepc) +{ + write_csr(mepc, mepc + 4); + + uintptr_t n = regs[17], arg0 = regs[10], arg1 = regs[11], retval, ipi_type; + + switch (n) + { + case SBI_CONSOLE_PUTCHAR: + retval = mcall_console_putchar(arg0); + break; + case SBI_CONSOLE_GETCHAR: + retval = mcall_console_getchar(); + break; + case SBI_SEND_IPI: + ipi_type = IPI_SOFT; + goto send_ipi; + case SBI_REMOTE_SFENCE_VMA: + case SBI_REMOTE_SFENCE_VMA_ASID: + ipi_type = IPI_SFENCE_VMA; + goto send_ipi; + case SBI_REMOTE_FENCE_I: + ipi_type = IPI_FENCE_I; +send_ipi: + send_ipi_many((uintptr_t*)arg0, ipi_type); + retval = 0; + break; + case SBI_CLEAR_IPI: + retval = mcall_clear_ipi(); + break; + case SBI_SHUTDOWN: + retval = mcall_shutdown(); + break; + case SBI_SET_TIMER: +#if __riscv_xlen == 32 + retval = mcall_set_timer(arg0 + ((uint64_t)arg1 << 32)); +#else + retval = mcall_set_timer(arg0); +#endif + break; + default: + redirect_trap(read_csr(mepc), read_csr(mstatus), read_csr(mbadaddr)); + retval = -ENOSYS; + break; + } + regs[10] = retval; +} + +void redirect_trap(uintptr_t epc, uintptr_t mstatus, uintptr_t badaddr) +{ + write_csr(sbadaddr, badaddr); + write_csr(sepc, epc); + write_csr(scause, read_csr(mcause)); + write_csr(mepc, read_csr(stvec)); + + uintptr_t new_mstatus = mstatus & ~(MSTATUS_SPP | MSTATUS_SPIE | MSTATUS_SIE); + uintptr_t mpp_s = MSTATUS_MPP & (MSTATUS_MPP >> 1); + new_mstatus |= (mstatus * (MSTATUS_SPIE / MSTATUS_SIE)) & MSTATUS_SPIE; + new_mstatus |= (mstatus / (mpp_s / MSTATUS_SPP)) & MSTATUS_SPP; + new_mstatus |= mpp_s; + write_csr(mstatus, new_mstatus); + + extern void __redirect_trap(); + return __redirect_trap(); +} + +void pmp_trap(uintptr_t* regs, uintptr_t mcause, uintptr_t mepc) +{ + redirect_trap(mepc, read_csr(mstatus), read_csr(mbadaddr)); +} + +static void machine_page_fault(uintptr_t* regs, uintptr_t dummy, uintptr_t mepc) +{ + // MPRV=1 iff this trap occurred while emulating an instruction on behalf + // of a lower privilege level. In that case, a2=epc and a3=mstatus. + if (read_csr(mstatus) & MSTATUS_MPRV) { + return redirect_trap(regs[12], regs[13], read_csr(mbadaddr)); + } + bad_trap(regs, dummy, mepc); +} + +void trap_from_machine_mode(uintptr_t* regs, uintptr_t dummy, uintptr_t mepc) +{ + uintptr_t mcause = read_csr(mcause); + + switch (mcause) + { + case CAUSE_LOAD_PAGE_FAULT: + case CAUSE_STORE_PAGE_FAULT: + case CAUSE_FETCH_ACCESS: + case CAUSE_LOAD_ACCESS: + case CAUSE_STORE_ACCESS: + return machine_page_fault(regs, dummy, mepc); + default: + bad_trap(regs, dummy, mepc); + } +} diff --git a/riscv-pk/machine/mtrap.h b/riscv-pk/machine/mtrap.h new file mode 100644 index 0000000..eafdb14 --- /dev/null +++ b/riscv-pk/machine/mtrap.h @@ -0,0 +1,96 @@ +#ifndef _RISCV_MTRAP_H +#define _RISCV_MTRAP_H + +#include "encoding.h" + +#ifdef __riscv_atomic +# define MAX_HARTS 8 // arbitrary +#else +# define MAX_HARTS 1 +#endif + +#ifndef __ASSEMBLER__ + +#include +#include +#include + +#define read_const_csr(reg) ({ unsigned long __tmp; \ + asm ("csrr %0, " #reg : "=r"(__tmp)); \ + __tmp; }) + +static inline int supports_extension(char ext) +{ + return read_const_csr(misa) & (1 << (ext - 'A')); +} + +static inline int xlen() +{ + return read_const_csr(misa) < 0 ? 64 : 32; +} + +extern uintptr_t mem_size; +extern volatile uint64_t* mtime; +extern volatile uint32_t* plic_priorities; +extern size_t plic_ndevs; + +typedef struct { + volatile uint32_t* ipi; + volatile int mipi_pending; + + volatile uint64_t* timecmp; + + volatile uint32_t* plic_m_thresh; + volatile uintptr_t* plic_m_ie; + volatile uint32_t* plic_s_thresh; + volatile uintptr_t* plic_s_ie; +} hls_t; + +#define MACHINE_STACK_TOP() ({ \ + register uintptr_t sp asm ("sp"); \ + (void*)((sp + RISCV_PGSIZE) & -RISCV_PGSIZE); }) + +// hart-local storage, at top of stack +#define HLS() ((hls_t*)(MACHINE_STACK_TOP() - HLS_SIZE)) +#define OTHER_HLS(id) ((hls_t*)((void*)HLS() + RISCV_PGSIZE * ((id) - read_const_csr(mhartid)))) + +hls_t* hls_init(uintptr_t hart_id); +void parse_config_string(); +void poweroff(uint16_t code) __attribute((noreturn)); +void printm(const char* s, ...); +void vprintm(const char *s, va_list args); +void putstring(const char* s); +#define assert(x) ({ if (!(x)) die("assertion failed: %s", #x); }) +#define die(str, ...) ({ printm("%s:%d: " str "\n", __FILE__, __LINE__, ##__VA_ARGS__); poweroff(-1); }) + +void enter_supervisor_mode(void (*fn)(uintptr_t), uintptr_t arg0, uintptr_t arg1) + __attribute__((noreturn)); +void boot_loader(uintptr_t dtb); +void boot_other_hart(uintptr_t dtb); + +static inline void wfi() +{ + asm volatile ("wfi" ::: "memory"); +} + +#endif // !__ASSEMBLER__ + +#define IPI_SOFT 0x1 +#define IPI_FENCE_I 0x2 +#define IPI_SFENCE_VMA 0x4 + +#define MACHINE_STACK_SIZE RISCV_PGSIZE +#define MENTRY_HLS_OFFSET (INTEGER_CONTEXT_SIZE + SOFT_FLOAT_CONTEXT_SIZE) +#define MENTRY_FRAME_SIZE (MENTRY_HLS_OFFSET + HLS_SIZE) +#define MENTRY_IPI_OFFSET (MENTRY_HLS_OFFSET) +#define MENTRY_IPI_PENDING_OFFSET (MENTRY_HLS_OFFSET + REGBYTES) + +#ifdef __riscv_flen +# define SOFT_FLOAT_CONTEXT_SIZE 0 +#else +# define SOFT_FLOAT_CONTEXT_SIZE (8 * 32) +#endif +#define HLS_SIZE 64 +#define INTEGER_CONTEXT_SIZE (32 * REGBYTES) + +#endif diff --git a/riscv-pk/machine/muldiv_emulation.c b/riscv-pk/machine/muldiv_emulation.c new file mode 100644 index 0000000..1fde345 --- /dev/null +++ b/riscv-pk/machine/muldiv_emulation.c @@ -0,0 +1,64 @@ +#include "emulation.h" + +#ifndef __riscv_muldiv + +#if __riscv_xlen == 64 +typedef __int128 double_int; +#else +typedef int64_t double_int; +#endif + +// These routines rely on the compiler to turn these operations into libcalls +// when not natively supported. So work on making those go fast. + +DECLARE_EMULATION_FUNC(emulate_mul_div) +{ + uintptr_t rs1 = GET_RS1(insn, regs), rs2 = GET_RS2(insn, regs), val; + + if ((insn & MASK_MUL) == MATCH_MUL) + val = rs1 * rs2; + else if ((insn & MASK_DIV) == MATCH_DIV) + val = (intptr_t)rs1 / (intptr_t)rs2; + else if ((insn & MASK_DIVU) == MATCH_DIVU) + val = rs1 / rs2; + else if ((insn & MASK_REM) == MATCH_REM) + val = (intptr_t)rs1 % (intptr_t)rs2; + else if ((insn & MASK_REMU) == MATCH_REMU) + val = rs1 % rs2; + else if ((insn & MASK_MULH) == MATCH_MULH) + val = ((double_int)(intptr_t)rs1 * (double_int)(intptr_t)rs2) >> (8 * sizeof(rs1)); + else if ((insn & MASK_MULHU) == MATCH_MULHU) + val = ((double_int)rs1 * (double_int)rs2) >> (8 * sizeof(rs1)); + else if ((insn & MASK_MULHSU) == MATCH_MULHSU) + val = ((double_int)(intptr_t)rs1 * (double_int)rs2) >> (8 * sizeof(rs1)); + else + return truly_illegal_insn(regs, mcause, mepc, mstatus, insn); + + SET_RD(insn, regs, val); +} + +#if __riscv_xlen == 64 + +DECLARE_EMULATION_FUNC(emulate_mul_div32) +{ + uint32_t rs1 = GET_RS1(insn, regs), rs2 = GET_RS2(insn, regs); + int32_t val; + + if ((insn & MASK_MULW) == MATCH_MULW) + val = rs1 * rs2; + else if ((insn & MASK_DIVW) == MATCH_DIVW) + val = (int32_t)rs1 / (int32_t)rs2; + else if ((insn & MASK_DIVUW) == MATCH_DIVUW) + val = rs1 / rs2; + else if ((insn & MASK_REMW) == MATCH_REMW) + val = (int32_t)rs1 % (int32_t)rs2; + else if ((insn & MASK_REMUW) == MATCH_REMUW) + val = rs1 % rs2; + else + return truly_illegal_insn(regs, mcause, mepc, mstatus, insn); + + SET_RD(insn, regs, val); +} + +#endif +#endif diff --git a/riscv-pk/machine/uart.c b/riscv-pk/machine/uart.c new file mode 100644 index 0000000..0645500 --- /dev/null +++ b/riscv-pk/machine/uart.c @@ -0,0 +1,76 @@ +#include +#include "uart.h" +#include "fdt.h" + +volatile uint32_t* uart; + +void uart_putchar(uint8_t ch) +{ +#ifdef __riscv_atomic + int32_t r; + do { + __asm__ __volatile__ ( + "amoor.w %0, %2, %1\n" + : "=r" (r), "+A" (uart[UART_REG_TXFIFO]) + : "r" (ch)); + } while (r < 0); +#else + volatile uint32_t *tx = uart + UART_REG_TXFIFO; + while ((int32_t)(*tx) < 0); + *tx = ch; +#endif +} + +int uart_getchar() +{ + int32_t ch = uart[UART_REG_RXFIFO]; + if (ch < 0) return -1; + return ch; +} + +struct uart_scan +{ + int compat; + uint64_t reg; +}; + +static void uart_open(const struct fdt_scan_node *node, void *extra) +{ + struct uart_scan *scan = (struct uart_scan *)extra; + memset(scan, 0, sizeof(*scan)); +} + +static void uart_prop(const struct fdt_scan_prop *prop, void *extra) +{ + struct uart_scan *scan = (struct uart_scan *)extra; + if (!strcmp(prop->name, "compatible") && !strcmp((const char*)prop->value, "sifive,uart0")) { + scan->compat = 1; + } else if (!strcmp(prop->name, "reg")) { + fdt_get_address(prop->node->parent, prop->value, &scan->reg); + } +} + +static void uart_done(const struct fdt_scan_node *node, void *extra) +{ + struct uart_scan *scan = (struct uart_scan *)extra; + if (!scan->compat || !scan->reg || uart) return; + + // Enable Rx/Tx channels + uart = (void*)(uintptr_t)scan->reg; + uart[UART_REG_TXCTRL] = UART_TXEN; + uart[UART_REG_RXCTRL] = UART_RXEN; +} + +void query_uart(uintptr_t fdt) +{ + struct fdt_cb cb; + struct uart_scan scan; + + memset(&cb, 0, sizeof(cb)); + cb.open = uart_open; + cb.prop = uart_prop; + cb.done = uart_done; + cb.extra = &scan; + + fdt_scan(fdt, &cb); +} diff --git a/riscv-pk/machine/uart.h b/riscv-pk/machine/uart.h new file mode 100644 index 0000000..51e951f --- /dev/null +++ b/riscv-pk/machine/uart.h @@ -0,0 +1,21 @@ +#ifndef _RISCV_UART_H +#define _RISCV_UART_H + +#include + +extern volatile uint32_t* uart; + +#define UART_REG_TXFIFO 0 +#define UART_REG_RXFIFO 1 +#define UART_REG_TXCTRL 2 +#define UART_REG_RXCTRL 3 +#define UART_REG_DIV 4 + +#define UART_TXEN 0x1 +#define UART_RXEN 0x1 + +void uart_putchar(uint8_t ch); +int uart_getchar(); +void query_uart(uintptr_t dtb); + +#endif diff --git a/riscv-pk/machine/uart16550.c b/riscv-pk/machine/uart16550.c new file mode 100644 index 0000000..fe1ba99 --- /dev/null +++ b/riscv-pk/machine/uart16550.c @@ -0,0 +1,74 @@ +#include +#include "uart16550.h" +#include "fdt.h" + +volatile uint8_t* uart16550; + +#define UART_REG_QUEUE 0 +#define UART_REG_LINESTAT 5 +#define UART_REG_STATUS_RX 0x01 +#define UART_REG_STATUS_TX 0x20 + +void uart16550_putchar(uint8_t ch) +{ + while ((uart16550[UART_REG_LINESTAT] & UART_REG_STATUS_TX) == 0); + uart16550[UART_REG_QUEUE] = ch; +} + +int uart16550_getchar() +{ + if (uart16550[UART_REG_LINESTAT] & UART_REG_STATUS_RX) + return uart16550[UART_REG_QUEUE]; + return -1; +} + +struct uart16550_scan +{ + int compat; + uint64_t reg; +}; + +static void uart16550_open(const struct fdt_scan_node *node, void *extra) +{ + struct uart16550_scan *scan = (struct uart16550_scan *)extra; + memset(scan, 0, sizeof(*scan)); +} + +static void uart16550_prop(const struct fdt_scan_prop *prop, void *extra) +{ + struct uart16550_scan *scan = (struct uart16550_scan *)extra; + if (!strcmp(prop->name, "compatible") && !strcmp((const char*)prop->value, "ns16550a")) { + scan->compat = 1; + } else if (!strcmp(prop->name, "reg")) { + fdt_get_address(prop->node->parent, prop->value, &scan->reg); + } +} + +static void uart16550_done(const struct fdt_scan_node *node, void *extra) +{ + struct uart16550_scan *scan = (struct uart16550_scan *)extra; + if (!scan->compat || !scan->reg || uart16550) return; + + uart16550 = (void*)(uintptr_t)scan->reg; + // http://wiki.osdev.org/Serial_Ports + uart16550[1] = 0x00; // Disable all interrupts + uart16550[3] = 0x80; // Enable DLAB (set baud rate divisor) + uart16550[0] = 0x03; // Set divisor to 3 (lo byte) 38400 baud + uart16550[1] = 0x00; // (hi byte) + uart16550[3] = 0x03; // 8 bits, no parity, one stop bit + uart16550[2] = 0xC7; // Enable FIFO, clear them, with 14-byte threshold +} + +void query_uart16550(uintptr_t fdt) +{ + struct fdt_cb cb; + struct uart16550_scan scan; + + memset(&cb, 0, sizeof(cb)); + cb.open = uart16550_open; + cb.prop = uart16550_prop; + cb.done = uart16550_done; + cb.extra = &scan; + + fdt_scan(fdt, &cb); +} diff --git a/riscv-pk/machine/uart16550.h b/riscv-pk/machine/uart16550.h new file mode 100644 index 0000000..d7a0805 --- /dev/null +++ b/riscv-pk/machine/uart16550.h @@ -0,0 +1,12 @@ +#ifndef _RISCV_16550_H +#define _RISCV_16550_H + +#include + +extern volatile uint8_t* uart16550; + +void uart16550_putchar(uint8_t ch); +int uart16550_getchar(); +void query_uart16550(uintptr_t dtb); + +#endif diff --git a/riscv-pk/machine/unprivileged_memory.h b/riscv-pk/machine/unprivileged_memory.h new file mode 100644 index 0000000..5cf2727 --- /dev/null +++ b/riscv-pk/machine/unprivileged_memory.h @@ -0,0 +1,103 @@ +#ifndef _RISCV_MISALIGNED_H +#define _RISCV_MISALIGNED_H + +#include "encoding.h" +#include "bits.h" +#include + +#define DECLARE_UNPRIVILEGED_LOAD_FUNCTION(type, insn) \ + static inline type load_##type(const type* addr, uintptr_t mepc) \ + { \ + register uintptr_t __mepc asm ("a2") = mepc; \ + register uintptr_t __mstatus asm ("a3"); \ + type val; \ + asm ("csrrs %0, mstatus, %3\n" \ + #insn " %1, %2\n" \ + "csrw mstatus, %0" \ + : "+&r" (__mstatus), "=&r" (val) \ + : "m" (*addr), "r" (MSTATUS_MPRV), "r" (__mepc)); \ + return val; \ + } + +#define DECLARE_UNPRIVILEGED_STORE_FUNCTION(type, insn) \ + static inline void store_##type(type* addr, type val, uintptr_t mepc) \ + { \ + register uintptr_t __mepc asm ("a2") = mepc; \ + register uintptr_t __mstatus asm ("a3"); \ + asm volatile ("csrrs %0, mstatus, %3\n" \ + #insn " %1, %2\n" \ + "csrw mstatus, %0" \ + : "+&r" (__mstatus) \ + : "r" (val), "m" (*addr), "r" (MSTATUS_MPRV), \ + "r" (__mepc)); \ + } + +DECLARE_UNPRIVILEGED_LOAD_FUNCTION(uint8_t, lbu) +DECLARE_UNPRIVILEGED_LOAD_FUNCTION(uint16_t, lhu) +DECLARE_UNPRIVILEGED_LOAD_FUNCTION(int8_t, lb) +DECLARE_UNPRIVILEGED_LOAD_FUNCTION(int16_t, lh) +DECLARE_UNPRIVILEGED_LOAD_FUNCTION(int32_t, lw) +DECLARE_UNPRIVILEGED_STORE_FUNCTION(uint8_t, sb) +DECLARE_UNPRIVILEGED_STORE_FUNCTION(uint16_t, sh) +DECLARE_UNPRIVILEGED_STORE_FUNCTION(uint32_t, sw) +#if __riscv_xlen == 64 +DECLARE_UNPRIVILEGED_LOAD_FUNCTION(uint32_t, lwu) +DECLARE_UNPRIVILEGED_LOAD_FUNCTION(uint64_t, ld) +DECLARE_UNPRIVILEGED_STORE_FUNCTION(uint64_t, sd) +DECLARE_UNPRIVILEGED_LOAD_FUNCTION(uintptr_t, ld) +#else +DECLARE_UNPRIVILEGED_LOAD_FUNCTION(uint32_t, lw) +DECLARE_UNPRIVILEGED_LOAD_FUNCTION(uintptr_t, lw) + +static inline uint64_t load_uint64_t(const uint64_t* addr, uintptr_t mepc) +{ + return load_uint32_t((uint32_t*)addr, mepc) + + ((uint64_t)load_uint32_t((uint32_t*)addr + 1, mepc) << 32); +} + +static inline void store_uint64_t(uint64_t* addr, uint64_t val, uintptr_t mepc) +{ + store_uint32_t((uint32_t*)addr, val, mepc); + store_uint32_t((uint32_t*)addr + 1, val >> 32, mepc); +} +#endif + +static uintptr_t __attribute__((always_inline)) get_insn(uintptr_t mepc, uintptr_t* mstatus) +{ + register uintptr_t __mepc asm ("a2") = mepc; + register uintptr_t __mstatus asm ("a3"); + uintptr_t val; +#ifndef __riscv_compressed + asm ("csrrs %[mstatus], mstatus, %[mprv]\n" + STR(LWU) " %[insn], (%[addr])\n" + "csrw mstatus, %[mstatus]" + : [mstatus] "+&r" (__mstatus), [insn] "=&r" (val) + : [mprv] "r" (MSTATUS_MPRV | MSTATUS_MXR), [addr] "r" (__mepc)); +#else + uintptr_t rvc_mask = 3, tmp; + asm ("csrrs %[mstatus], mstatus, %[mprv]\n" + "and %[tmp], %[addr], 2\n" + "bnez %[tmp], 1f\n" + STR(LWU) " %[insn], (%[addr])\n" + "and %[tmp], %[insn], %[rvc_mask]\n" + "beq %[tmp], %[rvc_mask], 2f\n" + "sll %[insn], %[insn], %[xlen_minus_16]\n" + "srl %[insn], %[insn], %[xlen_minus_16]\n" + "j 2f\n" + "1:\n" + "lhu %[insn], (%[addr])\n" + "and %[tmp], %[insn], %[rvc_mask]\n" + "bne %[tmp], %[rvc_mask], 2f\n" + "lhu %[tmp], 2(%[addr])\n" + "sll %[tmp], %[tmp], 16\n" + "add %[insn], %[insn], %[tmp]\n" + "2: csrw mstatus, %[mstatus]" + : [mstatus] "+&r" (__mstatus), [insn] "=&r" (val), [tmp] "=&r" (tmp) + : [mprv] "r" (MSTATUS_MPRV | MSTATUS_MXR), [addr] "r" (__mepc), + [rvc_mask] "r" (rvc_mask), [xlen_minus_16] "i" (__riscv_xlen - 16)); +#endif + *mstatus = __mstatus; + return val; +} + +#endif diff --git a/riscv-pk/machine/vm.h b/riscv-pk/machine/vm.h new file mode 100644 index 0000000..986f301 --- /dev/null +++ b/riscv-pk/machine/vm.h @@ -0,0 +1,35 @@ +#ifndef _VM_H +#define _VM_H + +#include "encoding.h" +#include + +#define MEGAPAGE_SIZE ((uintptr_t)(RISCV_PGSIZE << RISCV_PGLEVEL_BITS)) +#if __riscv_xlen == 64 +# define SATP_MODE_CHOICE INSERT_FIELD(0, SATP64_MODE, SATP_MODE_SV39) +# define VA_BITS 39 +# define GIGAPAGE_SIZE (MEGAPAGE_SIZE << RISCV_PGLEVEL_BITS) +#else +# define SATP_MODE_CHOICE INSERT_FIELD(0, SATP32_MODE, SATP_MODE_SV32) +# define VA_BITS 32 +#endif + +typedef uintptr_t pte_t; +extern pte_t* root_page_table; + +static inline void flush_tlb() +{ + asm volatile ("sfence.vma"); +} + +static inline pte_t pte_create(uintptr_t ppn, int type) +{ + return (ppn << PTE_PPN_SHIFT) | PTE_V | type; +} + +static inline pte_t ptd_create(uintptr_t ppn) +{ + return pte_create(ppn, PTE_V); +} + +#endif diff --git a/riscv-pk/scripts/config.guess b/riscv-pk/scripts/config.guess new file mode 100755 index 0000000..f32079a --- /dev/null +++ b/riscv-pk/scripts/config.guess @@ -0,0 +1,1526 @@ +#! /bin/sh +# Attempt to guess a canonical system name. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 +# Free Software Foundation, Inc. + +timestamp='2008-01-23' + +# This file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA +# 02110-1301, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + + +# Originally written by Per Bothner . +# Please send patches to . Submit a context +# diff and a properly formatted ChangeLog entry. +# +# This script attempts to guess a canonical system name similar to +# config.sub. If it succeeds, it prints the system name on stdout, and +# exits with 0. Otherwise, it exits with 1. +# +# The plan is that this can be called by configure scripts if you +# don't specify an explicit build system type. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] + +Output the configuration name of the system \`$me' is run on. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.guess ($timestamp) + +Originally written by Per Bothner. +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, +2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" >&2 + exit 1 ;; + * ) + break ;; + esac +done + +if test $# != 0; then + echo "$me: too many arguments$help" >&2 + exit 1 +fi + +trap 'exit 1' 1 2 15 + +# CC_FOR_BUILD -- compiler used by this script. Note that the use of a +# compiler to aid in system detection is discouraged as it requires +# temporary files to be created and, as you can see below, it is a +# headache to deal with in a portable fashion. + +# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still +# use `HOST_CC' if defined, but it is deprecated. + +# Portable tmp directory creation inspired by the Autoconf team. + +set_cc_for_build=' +trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; +trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; +: ${TMPDIR=/tmp} ; + { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || + { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || + { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || + { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; +dummy=$tmp/dummy ; +tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; +case $CC_FOR_BUILD,$HOST_CC,$CC in + ,,) echo "int x;" > $dummy.c ; + for c in cc gcc c89 c99 ; do + if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then + CC_FOR_BUILD="$c"; break ; + fi ; + done ; + if test x"$CC_FOR_BUILD" = x ; then + CC_FOR_BUILD=no_compiler_found ; + fi + ;; + ,,*) CC_FOR_BUILD=$CC ;; + ,*,*) CC_FOR_BUILD=$HOST_CC ;; +esac ; set_cc_for_build= ;' + +# This is needed to find uname on a Pyramid OSx when run in the BSD universe. +# (ghazi@noc.rutgers.edu 1994-08-24) +if (test -f /.attbin/uname) >/dev/null 2>&1 ; then + PATH=$PATH:/.attbin ; export PATH +fi + +UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown +UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown +UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown +UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown + +# Note: order is significant - the case branches are not exclusive. + +case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in + *:NetBSD:*:*) + # NetBSD (nbsd) targets should (where applicable) match one or + # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, + # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently + # switched to ELF, *-*-netbsd* would select the old + # object file format. This provides both forward + # compatibility and a consistent mechanism for selecting the + # object file format. + # + # Note: NetBSD doesn't particularly care about the vendor + # portion of the name. We always set it to "unknown". + sysctl="sysctl -n hw.machine_arch" + UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ + /usr/sbin/$sysctl 2>/dev/null || echo unknown)` + case "${UNAME_MACHINE_ARCH}" in + armeb) machine=armeb-unknown ;; + arm*) machine=arm-unknown ;; + sh3el) machine=shl-unknown ;; + sh3eb) machine=sh-unknown ;; + sh5el) machine=sh5le-unknown ;; + *) machine=${UNAME_MACHINE_ARCH}-unknown ;; + esac + # The Operating System including object format, if it has switched + # to ELF recently, or will in the future. + case "${UNAME_MACHINE_ARCH}" in + arm*|i386|m68k|ns32k|sh3*|sparc|vax) + eval $set_cc_for_build + if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep __ELF__ >/dev/null + then + # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). + # Return netbsd for either. FIX? + os=netbsd + else + os=netbsdelf + fi + ;; + *) + os=netbsd + ;; + esac + # The OS release + # Debian GNU/NetBSD machines have a different userland, and + # thus, need a distinct triplet. However, they do not need + # kernel version information, so it can be replaced with a + # suitable tag, in the style of linux-gnu. + case "${UNAME_VERSION}" in + Debian*) + release='-gnu' + ;; + *) + release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` + ;; + esac + # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: + # contains redundant information, the shorter form: + # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. + echo "${machine}-${os}${release}" + exit ;; + *:OpenBSD:*:*) + UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` + echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} + exit ;; + *:ekkoBSD:*:*) + echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} + exit ;; + *:SolidBSD:*:*) + echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} + exit ;; + macppc:MirBSD:*:*) + echo powerpc-unknown-mirbsd${UNAME_RELEASE} + exit ;; + *:MirBSD:*:*) + echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} + exit ;; + alpha:OSF1:*:*) + case $UNAME_RELEASE in + *4.0) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` + ;; + *5.*) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` + ;; + esac + # According to Compaq, /usr/sbin/psrinfo has been available on + # OSF/1 and Tru64 systems produced since 1995. I hope that + # covers most systems running today. This code pipes the CPU + # types through head -n 1, so we only detect the type of CPU 0. + ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` + case "$ALPHA_CPU_TYPE" in + "EV4 (21064)") + UNAME_MACHINE="alpha" ;; + "EV4.5 (21064)") + UNAME_MACHINE="alpha" ;; + "LCA4 (21066/21068)") + UNAME_MACHINE="alpha" ;; + "EV5 (21164)") + UNAME_MACHINE="alphaev5" ;; + "EV5.6 (21164A)") + UNAME_MACHINE="alphaev56" ;; + "EV5.6 (21164PC)") + UNAME_MACHINE="alphapca56" ;; + "EV5.7 (21164PC)") + UNAME_MACHINE="alphapca57" ;; + "EV6 (21264)") + UNAME_MACHINE="alphaev6" ;; + "EV6.7 (21264A)") + UNAME_MACHINE="alphaev67" ;; + "EV6.8CB (21264C)") + UNAME_MACHINE="alphaev68" ;; + "EV6.8AL (21264B)") + UNAME_MACHINE="alphaev68" ;; + "EV6.8CX (21264D)") + UNAME_MACHINE="alphaev68" ;; + "EV6.9A (21264/EV69A)") + UNAME_MACHINE="alphaev69" ;; + "EV7 (21364)") + UNAME_MACHINE="alphaev7" ;; + "EV7.9 (21364A)") + UNAME_MACHINE="alphaev79" ;; + esac + # A Pn.n version is a patched version. + # A Vn.n version is a released version. + # A Tn.n version is a released field test version. + # A Xn.n version is an unreleased experimental baselevel. + # 1.2 uses "1.2" for uname -r. + echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + exit ;; + Alpha\ *:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # Should we change UNAME_MACHINE based on the output of uname instead + # of the specific Alpha model? + echo alpha-pc-interix + exit ;; + 21064:Windows_NT:50:3) + echo alpha-dec-winnt3.5 + exit ;; + Amiga*:UNIX_System_V:4.0:*) + echo m68k-unknown-sysv4 + exit ;; + *:[Aa]miga[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-amigaos + exit ;; + *:[Mm]orph[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-morphos + exit ;; + *:OS/390:*:*) + echo i370-ibm-openedition + exit ;; + *:z/VM:*:*) + echo s390-ibm-zvmoe + exit ;; + *:OS400:*:*) + echo powerpc-ibm-os400 + exit ;; + arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) + echo arm-acorn-riscix${UNAME_RELEASE} + exit ;; + arm:riscos:*:*|arm:RISCOS:*:*) + echo arm-unknown-riscos + exit ;; + SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) + echo hppa1.1-hitachi-hiuxmpp + exit ;; + Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) + # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. + if test "`(/bin/universe) 2>/dev/null`" = att ; then + echo pyramid-pyramid-sysv3 + else + echo pyramid-pyramid-bsd + fi + exit ;; + NILE*:*:*:dcosx) + echo pyramid-pyramid-svr4 + exit ;; + DRS?6000:unix:4.0:6*) + echo sparc-icl-nx6 + exit ;; + DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) + case `/usr/bin/uname -p` in + sparc) echo sparc-icl-nx7; exit ;; + esac ;; + sun4H:SunOS:5.*:*) + echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) + echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) + echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:6*:*) + # According to config.sub, this is the proper way to canonicalize + # SunOS6. Hard to guess exactly what SunOS6 will be like, but + # it's likely to be more like Solaris than SunOS4. + echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:*:*) + case "`/usr/bin/arch -k`" in + Series*|S4*) + UNAME_RELEASE=`uname -v` + ;; + esac + # Japanese Language versions have a version number like `4.1.3-JL'. + echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` + exit ;; + sun3*:SunOS:*:*) + echo m68k-sun-sunos${UNAME_RELEASE} + exit ;; + sun*:*:4.2BSD:*) + UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` + test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 + case "`/bin/arch`" in + sun3) + echo m68k-sun-sunos${UNAME_RELEASE} + ;; + sun4) + echo sparc-sun-sunos${UNAME_RELEASE} + ;; + esac + exit ;; + aushp:SunOS:*:*) + echo sparc-auspex-sunos${UNAME_RELEASE} + exit ;; + # The situation for MiNT is a little confusing. The machine name + # can be virtually everything (everything which is not + # "atarist" or "atariste" at least should have a processor + # > m68000). The system name ranges from "MiNT" over "FreeMiNT" + # to the lowercase version "mint" (or "freemint"). Finally + # the system name "TOS" denotes a system which is actually not + # MiNT. But MiNT is downward compatible to TOS, so this should + # be no problem. + atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) + echo m68k-milan-mint${UNAME_RELEASE} + exit ;; + hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) + echo m68k-hades-mint${UNAME_RELEASE} + exit ;; + *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) + echo m68k-unknown-mint${UNAME_RELEASE} + exit ;; + m68k:machten:*:*) + echo m68k-apple-machten${UNAME_RELEASE} + exit ;; + powerpc:machten:*:*) + echo powerpc-apple-machten${UNAME_RELEASE} + exit ;; + RISC*:Mach:*:*) + echo mips-dec-mach_bsd4.3 + exit ;; + RISC*:ULTRIX:*:*) + echo mips-dec-ultrix${UNAME_RELEASE} + exit ;; + VAX*:ULTRIX*:*:*) + echo vax-dec-ultrix${UNAME_RELEASE} + exit ;; + 2020:CLIX:*:* | 2430:CLIX:*:*) + echo clipper-intergraph-clix${UNAME_RELEASE} + exit ;; + mips:*:*:UMIPS | mips:*:*:RISCos) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c +#ifdef __cplusplus +#include /* for printf() prototype */ + int main (int argc, char *argv[]) { +#else + int main (argc, argv) int argc; char *argv[]; { +#endif + #if defined (host_mips) && defined (MIPSEB) + #if defined (SYSTYPE_SYSV) + printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_SVR4) + printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) + printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); + #endif + #endif + exit (-1); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && + dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && + SYSTEM_NAME=`$dummy $dummyarg` && + { echo "$SYSTEM_NAME"; exit; } + echo mips-mips-riscos${UNAME_RELEASE} + exit ;; + Motorola:PowerMAX_OS:*:*) + echo powerpc-motorola-powermax + exit ;; + Motorola:*:4.3:PL8-*) + echo powerpc-harris-powermax + exit ;; + Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) + echo powerpc-harris-powermax + exit ;; + Night_Hawk:Power_UNIX:*:*) + echo powerpc-harris-powerunix + exit ;; + m88k:CX/UX:7*:*) + echo m88k-harris-cxux7 + exit ;; + m88k:*:4*:R4*) + echo m88k-motorola-sysv4 + exit ;; + m88k:*:3*:R3*) + echo m88k-motorola-sysv3 + exit ;; + AViiON:dgux:*:*) + # DG/UX returns AViiON for all architectures + UNAME_PROCESSOR=`/usr/bin/uname -p` + if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] + then + if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ + [ ${TARGET_BINARY_INTERFACE}x = x ] + then + echo m88k-dg-dgux${UNAME_RELEASE} + else + echo m88k-dg-dguxbcs${UNAME_RELEASE} + fi + else + echo i586-dg-dgux${UNAME_RELEASE} + fi + exit ;; + M88*:DolphinOS:*:*) # DolphinOS (SVR3) + echo m88k-dolphin-sysv3 + exit ;; + M88*:*:R3*:*) + # Delta 88k system running SVR3 + echo m88k-motorola-sysv3 + exit ;; + XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) + echo m88k-tektronix-sysv3 + exit ;; + Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) + echo m68k-tektronix-bsd + exit ;; + *:IRIX*:*:*) + echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` + exit ;; + ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. + echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id + exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' + i*86:AIX:*:*) + echo i386-ibm-aix + exit ;; + ia64:AIX:*:*) + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} + exit ;; + *:AIX:2:3) + if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + + main() + { + if (!__power_pc()) + exit(1); + puts("powerpc-ibm-aix3.2.5"); + exit(0); + } +EOF + if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` + then + echo "$SYSTEM_NAME" + else + echo rs6000-ibm-aix3.2.5 + fi + elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then + echo rs6000-ibm-aix3.2.4 + else + echo rs6000-ibm-aix3.2 + fi + exit ;; + *:AIX:*:[456]) + IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` + if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then + IBM_ARCH=rs6000 + else + IBM_ARCH=powerpc + fi + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${IBM_ARCH}-ibm-aix${IBM_REV} + exit ;; + *:AIX:*:*) + echo rs6000-ibm-aix + exit ;; + ibmrt:4.4BSD:*|romp-ibm:BSD:*) + echo romp-ibm-bsd4.4 + exit ;; + ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and + echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to + exit ;; # report: romp-ibm BSD 4.3 + *:BOSX:*:*) + echo rs6000-bull-bosx + exit ;; + DPX/2?00:B.O.S.:*:*) + echo m68k-bull-sysv3 + exit ;; + 9000/[34]??:4.3bsd:1.*:*) + echo m68k-hp-bsd + exit ;; + hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) + echo m68k-hp-bsd4.4 + exit ;; + 9000/[34678]??:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + case "${UNAME_MACHINE}" in + 9000/31? ) HP_ARCH=m68000 ;; + 9000/[34]?? ) HP_ARCH=m68k ;; + 9000/[678][0-9][0-9]) + if [ -x /usr/bin/getconf ]; then + sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` + sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` + case "${sc_cpu_version}" in + 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 + 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 + 532) # CPU_PA_RISC2_0 + case "${sc_kernel_bits}" in + 32) HP_ARCH="hppa2.0n" ;; + 64) HP_ARCH="hppa2.0w" ;; + '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 + esac ;; + esac + fi + if [ "${HP_ARCH}" = "" ]; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + + #define _HPUX_SOURCE + #include + #include + + int main () + { + #if defined(_SC_KERNEL_BITS) + long bits = sysconf(_SC_KERNEL_BITS); + #endif + long cpu = sysconf (_SC_CPU_VERSION); + + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1"); break; + case CPU_PA_RISC2_0: + #if defined(_SC_KERNEL_BITS) + switch (bits) + { + case 64: puts ("hppa2.0w"); break; + case 32: puts ("hppa2.0n"); break; + default: puts ("hppa2.0"); break; + } break; + #else /* !defined(_SC_KERNEL_BITS) */ + puts ("hppa2.0"); break; + #endif + default: puts ("hppa1.0"); break; + } + exit (0); + } +EOF + (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` + test -z "$HP_ARCH" && HP_ARCH=hppa + fi ;; + esac + if [ ${HP_ARCH} = "hppa2.0w" ] + then + eval $set_cc_for_build + + # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating + # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler + # generating 64-bit code. GNU and HP use different nomenclature: + # + # $ CC_FOR_BUILD=cc ./config.guess + # => hppa2.0w-hp-hpux11.23 + # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess + # => hppa64-hp-hpux11.23 + + if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | + grep __LP64__ >/dev/null + then + HP_ARCH="hppa2.0w" + else + HP_ARCH="hppa64" + fi + fi + echo ${HP_ARCH}-hp-hpux${HPUX_REV} + exit ;; + ia64:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + echo ia64-hp-hpux${HPUX_REV} + exit ;; + 3050*:HI-UX:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + int + main () + { + long cpu = sysconf (_SC_CPU_VERSION); + /* The order matters, because CPU_IS_HP_MC68K erroneously returns + true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct + results, however. */ + if (CPU_IS_PA_RISC (cpu)) + { + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; + case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; + default: puts ("hppa-hitachi-hiuxwe2"); break; + } + } + else if (CPU_IS_HP_MC68K (cpu)) + puts ("m68k-hitachi-hiuxwe2"); + else puts ("unknown-hitachi-hiuxwe2"); + exit (0); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && + { echo "$SYSTEM_NAME"; exit; } + echo unknown-hitachi-hiuxwe2 + exit ;; + 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) + echo hppa1.1-hp-bsd + exit ;; + 9000/8??:4.3bsd:*:*) + echo hppa1.0-hp-bsd + exit ;; + *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) + echo hppa1.0-hp-mpeix + exit ;; + hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) + echo hppa1.1-hp-osf + exit ;; + hp8??:OSF1:*:*) + echo hppa1.0-hp-osf + exit ;; + i*86:OSF1:*:*) + if [ -x /usr/sbin/sysversion ] ; then + echo ${UNAME_MACHINE}-unknown-osf1mk + else + echo ${UNAME_MACHINE}-unknown-osf1 + fi + exit ;; + parisc*:Lites*:*:*) + echo hppa1.1-hp-lites + exit ;; + C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) + echo c1-convex-bsd + exit ;; + C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit ;; + C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) + echo c34-convex-bsd + exit ;; + C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) + echo c38-convex-bsd + exit ;; + C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) + echo c4-convex-bsd + exit ;; + CRAY*Y-MP:*:*:*) + echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*[A-Z]90:*:*:*) + echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ + | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ + -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ + -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*TS:*:*:*) + echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*T3E:*:*:*) + echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*SV1:*:*:*) + echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + *:UNICOS/mp:*:*) + echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) + FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` + echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; + 5000:UNIX_System_V:4.*:*) + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` + echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; + i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) + echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} + exit ;; + sparc*:BSD/OS:*:*) + echo sparc-unknown-bsdi${UNAME_RELEASE} + exit ;; + *:BSD/OS:*:*) + echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} + exit ;; + *:FreeBSD:*:*) + case ${UNAME_MACHINE} in + pc98) + echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + amd64) + echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + *) + echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + esac + exit ;; + i*:CYGWIN*:*) + echo ${UNAME_MACHINE}-pc-cygwin + exit ;; + *:MINGW*:*) + echo ${UNAME_MACHINE}-pc-mingw32 + exit ;; + i*:windows32*:*) + # uname -m includes "-pc" on this system. + echo ${UNAME_MACHINE}-mingw32 + exit ;; + i*:PW*:*) + echo ${UNAME_MACHINE}-pc-pw32 + exit ;; + *:Interix*:[3456]*) + case ${UNAME_MACHINE} in + x86) + echo i586-pc-interix${UNAME_RELEASE} + exit ;; + EM64T | authenticamd) + echo x86_64-unknown-interix${UNAME_RELEASE} + exit ;; + IA64) + echo ia64-unknown-interix${UNAME_RELEASE} + exit ;; + esac ;; + [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) + echo i${UNAME_MACHINE}-pc-mks + exit ;; + i*:Windows_NT*:* | Pentium*:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we + # UNAME_MACHINE based on the output of uname instead of i386? + echo i586-pc-interix + exit ;; + i*:UWIN*:*) + echo ${UNAME_MACHINE}-pc-uwin + exit ;; + amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) + echo x86_64-unknown-cygwin + exit ;; + p*:CYGWIN*:*) + echo powerpcle-unknown-cygwin + exit ;; + prep*:SunOS:5.*:*) + echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + *:GNU:*:*) + # the GNU system + echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` + exit ;; + *:GNU/*:*:*) + # other systems with GNU libc and userland + echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu + exit ;; + i*86:Minix:*:*) + echo ${UNAME_MACHINE}-pc-minix + exit ;; + arm*:Linux:*:*) + eval $set_cc_for_build + if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ARM_EABI__ + then + echo ${UNAME_MACHINE}-unknown-linux-gnu + else + echo ${UNAME_MACHINE}-unknown-linux-gnueabi + fi + exit ;; + avr32*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + cris:Linux:*:*) + echo cris-axis-linux-gnu + exit ;; + crisv32:Linux:*:*) + echo crisv32-axis-linux-gnu + exit ;; + frv:Linux:*:*) + echo frv-unknown-linux-gnu + exit ;; + ia64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + m32r*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + m68*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + mips:Linux:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #undef CPU + #undef mips + #undef mipsel + #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) + CPU=mipsel + #else + #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) + CPU=mips + #else + CPU= + #endif + #endif +EOF + eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' + /^CPU/{ + s: ::g + p + }'`" + test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } + ;; + mips64:Linux:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #undef CPU + #undef mips64 + #undef mips64el + #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) + CPU=mips64el + #else + #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) + CPU=mips64 + #else + CPU= + #endif + #endif +EOF + eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' + /^CPU/{ + s: ::g + p + }'`" + test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } + ;; + or32:Linux:*:*) + echo or32-unknown-linux-gnu + exit ;; + ppc:Linux:*:*) + echo powerpc-unknown-linux-gnu + exit ;; + ppc64:Linux:*:*) + echo powerpc64-unknown-linux-gnu + exit ;; + alpha:Linux:*:*) + case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in + EV5) UNAME_MACHINE=alphaev5 ;; + EV56) UNAME_MACHINE=alphaev56 ;; + PCA56) UNAME_MACHINE=alphapca56 ;; + PCA57) UNAME_MACHINE=alphapca56 ;; + EV6) UNAME_MACHINE=alphaev6 ;; + EV67) UNAME_MACHINE=alphaev67 ;; + EV68*) UNAME_MACHINE=alphaev68 ;; + esac + objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null + if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi + echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} + exit ;; + parisc:Linux:*:* | hppa:Linux:*:*) + # Look for CPU level + case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in + PA7*) echo hppa1.1-unknown-linux-gnu ;; + PA8*) echo hppa2.0-unknown-linux-gnu ;; + *) echo hppa-unknown-linux-gnu ;; + esac + exit ;; + parisc64:Linux:*:* | hppa64:Linux:*:*) + echo hppa64-unknown-linux-gnu + exit ;; + s390:Linux:*:* | s390x:Linux:*:*) + echo ${UNAME_MACHINE}-ibm-linux + exit ;; + sh64*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + sh*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + sparc:Linux:*:* | sparc64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + vax:Linux:*:*) + echo ${UNAME_MACHINE}-dec-linux-gnu + exit ;; + x86_64:Linux:*:*) + echo x86_64-unknown-linux-gnu + exit ;; + xtensa*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + i*86:Linux:*:*) + # The BFD linker knows what the default object file format is, so + # first see if it will tell us. cd to the root directory to prevent + # problems with other programs or directories called `ld' in the path. + # Set LC_ALL=C to ensure ld outputs messages in English. + ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \ + | sed -ne '/supported targets:/!d + s/[ ][ ]*/ /g + s/.*supported targets: *// + s/ .*// + p'` + case "$ld_supported_targets" in + elf32-i386) + TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" + ;; + a.out-i386-linux) + echo "${UNAME_MACHINE}-pc-linux-gnuaout" + exit ;; + coff-i386) + echo "${UNAME_MACHINE}-pc-linux-gnucoff" + exit ;; + "") + # Either a pre-BFD a.out linker (linux-gnuoldld) or + # one that does not give us useful --help. + echo "${UNAME_MACHINE}-pc-linux-gnuoldld" + exit ;; + esac + # Determine whether the default compiler is a.out or elf + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + #ifdef __ELF__ + # ifdef __GLIBC__ + # if __GLIBC__ >= 2 + LIBC=gnu + # else + LIBC=gnulibc1 + # endif + # else + LIBC=gnulibc1 + # endif + #else + #if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C) || defined(__SUNPRO_CC) + LIBC=gnu + #else + LIBC=gnuaout + #endif + #endif + #ifdef __dietlibc__ + LIBC=dietlibc + #endif +EOF + eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' + /^LIBC/{ + s: ::g + p + }'`" + test x"${LIBC}" != x && { + echo "${UNAME_MACHINE}-pc-linux-${LIBC}" + exit + } + test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; } + ;; + i*86:DYNIX/ptx:4*:*) + # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. + # earlier versions are messed up and put the nodename in both + # sysname and nodename. + echo i386-sequent-sysv4 + exit ;; + i*86:UNIX_SV:4.2MP:2.*) + # Unixware is an offshoot of SVR4, but it has its own version + # number series starting with 2... + # I am not positive that other SVR4 systems won't match this, + # I just have to hope. -- rms. + # Use sysv4.2uw... so that sysv4* matches it. + echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} + exit ;; + i*86:OS/2:*:*) + # If we were able to find `uname', then EMX Unix compatibility + # is probably installed. + echo ${UNAME_MACHINE}-pc-os2-emx + exit ;; + i*86:XTS-300:*:STOP) + echo ${UNAME_MACHINE}-unknown-stop + exit ;; + i*86:atheos:*:*) + echo ${UNAME_MACHINE}-unknown-atheos + exit ;; + i*86:syllable:*:*) + echo ${UNAME_MACHINE}-pc-syllable + exit ;; + i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) + echo i386-unknown-lynxos${UNAME_RELEASE} + exit ;; + i*86:*DOS:*:*) + echo ${UNAME_MACHINE}-pc-msdosdjgpp + exit ;; + i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) + UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` + if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then + echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} + else + echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} + fi + exit ;; + i*86:*:5:[678]*) + # UnixWare 7.x, OpenUNIX and OpenServer 6. + case `/bin/uname -X | grep "^Machine"` in + *486*) UNAME_MACHINE=i486 ;; + *Pentium) UNAME_MACHINE=i586 ;; + *Pent*|*Celeron) UNAME_MACHINE=i686 ;; + esac + echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} + exit ;; + i*86:*:3.2:*) + if test -f /usr/options/cb.name; then + UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then + UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` + (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 + (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ + && UNAME_MACHINE=i586 + (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ + && UNAME_MACHINE=i686 + (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ + && UNAME_MACHINE=i686 + echo ${UNAME_MACHINE}-pc-sco$UNAME_REL + else + echo ${UNAME_MACHINE}-pc-sysv32 + fi + exit ;; + pc:*:*:*) + # Left here for compatibility: + # uname -m prints for DJGPP always 'pc', but it prints nothing about + # the processor, so we play safe by assuming i386. + echo i386-pc-msdosdjgpp + exit ;; + Intel:Mach:3*:*) + echo i386-pc-mach3 + exit ;; + paragon:*:*:*) + echo i860-intel-osf1 + exit ;; + i860:*:4.*:*) # i860-SVR4 + if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then + echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 + else # Add other i860-SVR4 vendors below as they are discovered. + echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 + fi + exit ;; + mini*:CTIX:SYS*5:*) + # "miniframe" + echo m68010-convergent-sysv + exit ;; + mc68k:UNIX:SYSTEM5:3.51m) + echo m68k-convergent-sysv + exit ;; + M680?0:D-NIX:5.3:*) + echo m68k-diab-dnix + exit ;; + M68*:*:R3V[5678]*:*) + test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; + 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) + OS_REL='' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; + 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4; exit; } ;; + m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) + echo m68k-unknown-lynxos${UNAME_RELEASE} + exit ;; + mc68030:UNIX_System_V:4.*:*) + echo m68k-atari-sysv4 + exit ;; + TSUNAMI:LynxOS:2.*:*) + echo sparc-unknown-lynxos${UNAME_RELEASE} + exit ;; + rs6000:LynxOS:2.*:*) + echo rs6000-unknown-lynxos${UNAME_RELEASE} + exit ;; + PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*) + echo powerpc-unknown-lynxos${UNAME_RELEASE} + exit ;; + SM[BE]S:UNIX_SV:*:*) + echo mips-dde-sysv${UNAME_RELEASE} + exit ;; + RM*:ReliantUNIX-*:*:*) + echo mips-sni-sysv4 + exit ;; + RM*:SINIX-*:*:*) + echo mips-sni-sysv4 + exit ;; + *:SINIX-*:*:*) + if uname -p 2>/dev/null >/dev/null ; then + UNAME_MACHINE=`(uname -p) 2>/dev/null` + echo ${UNAME_MACHINE}-sni-sysv4 + else + echo ns32k-sni-sysv + fi + exit ;; + PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort + # says + echo i586-unisys-sysv4 + exit ;; + *:UNIX_System_V:4*:FTX*) + # From Gerald Hewes . + # How about differentiating between stratus architectures? -djm + echo hppa1.1-stratus-sysv4 + exit ;; + *:*:*:FTX*) + # From seanf@swdc.stratus.com. + echo i860-stratus-sysv4 + exit ;; + i*86:VOS:*:*) + # From Paul.Green@stratus.com. + echo ${UNAME_MACHINE}-stratus-vos + exit ;; + *:VOS:*:*) + # From Paul.Green@stratus.com. + echo hppa1.1-stratus-vos + exit ;; + mc68*:A/UX:*:*) + echo m68k-apple-aux${UNAME_RELEASE} + exit ;; + news*:NEWS-OS:6*:*) + echo mips-sony-newsos6 + exit ;; + R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) + if [ -d /usr/nec ]; then + echo mips-nec-sysv${UNAME_RELEASE} + else + echo mips-unknown-sysv${UNAME_RELEASE} + fi + exit ;; + BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. + echo powerpc-be-beos + exit ;; + BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. + echo powerpc-apple-beos + exit ;; + BePC:BeOS:*:*) # BeOS running on Intel PC compatible. + echo i586-pc-beos + exit ;; + SX-4:SUPER-UX:*:*) + echo sx4-nec-superux${UNAME_RELEASE} + exit ;; + SX-5:SUPER-UX:*:*) + echo sx5-nec-superux${UNAME_RELEASE} + exit ;; + SX-6:SUPER-UX:*:*) + echo sx6-nec-superux${UNAME_RELEASE} + exit ;; + SX-7:SUPER-UX:*:*) + echo sx7-nec-superux${UNAME_RELEASE} + exit ;; + SX-8:SUPER-UX:*:*) + echo sx8-nec-superux${UNAME_RELEASE} + exit ;; + SX-8R:SUPER-UX:*:*) + echo sx8r-nec-superux${UNAME_RELEASE} + exit ;; + Power*:Rhapsody:*:*) + echo powerpc-apple-rhapsody${UNAME_RELEASE} + exit ;; + *:Rhapsody:*:*) + echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} + exit ;; + *:Darwin:*:*) + UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown + case $UNAME_PROCESSOR in + unknown) UNAME_PROCESSOR=powerpc ;; + esac + echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} + exit ;; + *:procnto*:*:* | *:QNX:[0123456789]*:*) + UNAME_PROCESSOR=`uname -p` + if test "$UNAME_PROCESSOR" = "x86"; then + UNAME_PROCESSOR=i386 + UNAME_MACHINE=pc + fi + echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} + exit ;; + *:QNX:*:4*) + echo i386-pc-qnx + exit ;; + NSE-?:NONSTOP_KERNEL:*:*) + echo nse-tandem-nsk${UNAME_RELEASE} + exit ;; + NSR-?:NONSTOP_KERNEL:*:*) + echo nsr-tandem-nsk${UNAME_RELEASE} + exit ;; + *:NonStop-UX:*:*) + echo mips-compaq-nonstopux + exit ;; + BS2000:POSIX*:*:*) + echo bs2000-siemens-sysv + exit ;; + DS/*:UNIX_System_V:*:*) + echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} + exit ;; + *:Plan9:*:*) + # "uname -m" is not consistent, so use $cputype instead. 386 + # is converted to i386 for consistency with other x86 + # operating systems. + if test "$cputype" = "386"; then + UNAME_MACHINE=i386 + else + UNAME_MACHINE="$cputype" + fi + echo ${UNAME_MACHINE}-unknown-plan9 + exit ;; + *:TOPS-10:*:*) + echo pdp10-unknown-tops10 + exit ;; + *:TENEX:*:*) + echo pdp10-unknown-tenex + exit ;; + KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) + echo pdp10-dec-tops20 + exit ;; + XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) + echo pdp10-xkl-tops20 + exit ;; + *:TOPS-20:*:*) + echo pdp10-unknown-tops20 + exit ;; + *:ITS:*:*) + echo pdp10-unknown-its + exit ;; + SEI:*:*:SEIUX) + echo mips-sei-seiux${UNAME_RELEASE} + exit ;; + *:DragonFly:*:*) + echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` + exit ;; + *:*VMS:*:*) + UNAME_MACHINE=`(uname -p) 2>/dev/null` + case "${UNAME_MACHINE}" in + A*) echo alpha-dec-vms ; exit ;; + I*) echo ia64-dec-vms ; exit ;; + V*) echo vax-dec-vms ; exit ;; + esac ;; + *:XENIX:*:SysV) + echo i386-pc-xenix + exit ;; + i*86:skyos:*:*) + echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' + exit ;; + i*86:rdos:*:*) + echo ${UNAME_MACHINE}-pc-rdos + exit ;; +esac + +#echo '(No uname command or uname output not recognized.)' 1>&2 +#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 + +eval $set_cc_for_build +cat >$dummy.c < +# include +#endif +main () +{ +#if defined (sony) +#if defined (MIPSEB) + /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, + I don't know.... */ + printf ("mips-sony-bsd\n"); exit (0); +#else +#include + printf ("m68k-sony-newsos%s\n", +#ifdef NEWSOS4 + "4" +#else + "" +#endif + ); exit (0); +#endif +#endif + +#if defined (__arm) && defined (__acorn) && defined (__unix) + printf ("arm-acorn-riscix\n"); exit (0); +#endif + +#if defined (hp300) && !defined (hpux) + printf ("m68k-hp-bsd\n"); exit (0); +#endif + +#if defined (NeXT) +#if !defined (__ARCHITECTURE__) +#define __ARCHITECTURE__ "m68k" +#endif + int version; + version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; + if (version < 4) + printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); + else + printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); + exit (0); +#endif + +#if defined (MULTIMAX) || defined (n16) +#if defined (UMAXV) + printf ("ns32k-encore-sysv\n"); exit (0); +#else +#if defined (CMU) + printf ("ns32k-encore-mach\n"); exit (0); +#else + printf ("ns32k-encore-bsd\n"); exit (0); +#endif +#endif +#endif + +#if defined (__386BSD__) + printf ("i386-pc-bsd\n"); exit (0); +#endif + +#if defined (sequent) +#if defined (i386) + printf ("i386-sequent-dynix\n"); exit (0); +#endif +#if defined (ns32000) + printf ("ns32k-sequent-dynix\n"); exit (0); +#endif +#endif + +#if defined (_SEQUENT_) + struct utsname un; + + uname(&un); + + if (strncmp(un.version, "V2", 2) == 0) { + printf ("i386-sequent-ptx2\n"); exit (0); + } + if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ + printf ("i386-sequent-ptx1\n"); exit (0); + } + printf ("i386-sequent-ptx\n"); exit (0); + +#endif + +#if defined (vax) +# if !defined (ultrix) +# include +# if defined (BSD) +# if BSD == 43 + printf ("vax-dec-bsd4.3\n"); exit (0); +# else +# if BSD == 199006 + printf ("vax-dec-bsd4.3reno\n"); exit (0); +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# endif +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# else + printf ("vax-dec-ultrix\n"); exit (0); +# endif +#endif + +#if defined (alliant) && defined (i860) + printf ("i860-alliant-bsd\n"); exit (0); +#endif + + exit (1); +} +EOF + +$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` && + { echo "$SYSTEM_NAME"; exit; } + +# Apollos put the system type in the environment. + +test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; } + +# Convex versions that predate uname can use getsysinfo(1) + +if [ -x /usr/convex/getsysinfo ] +then + case `getsysinfo -f cpu_type` in + c1*) + echo c1-convex-bsd + exit ;; + c2*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit ;; + c34*) + echo c34-convex-bsd + exit ;; + c38*) + echo c38-convex-bsd + exit ;; + c4*) + echo c4-convex-bsd + exit ;; + esac +fi + +cat >&2 < in order to provide the needed +information to handle your system. + +config.guess timestamp = $timestamp + +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null` + +hostinfo = `(hostinfo) 2>/dev/null` +/bin/universe = `(/bin/universe) 2>/dev/null` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` +/bin/arch = `(/bin/arch) 2>/dev/null` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` + +UNAME_MACHINE = ${UNAME_MACHINE} +UNAME_RELEASE = ${UNAME_RELEASE} +UNAME_SYSTEM = ${UNAME_SYSTEM} +UNAME_VERSION = ${UNAME_VERSION} +EOF + +exit 1 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/riscv-pk/scripts/config.sub b/riscv-pk/scripts/config.sub new file mode 100755 index 0000000..0d8be3d --- /dev/null +++ b/riscv-pk/scripts/config.sub @@ -0,0 +1,1662 @@ +#! /bin/sh +# Configuration validation subroutine script. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 +# Free Software Foundation, Inc. + +timestamp='2010-06-17' + +# This file is (in principle) common to ALL GNU software. +# The presence of a machine in this file suggests that SOME GNU software +# can handle that machine. It does not imply ALL GNU software can. +# +# This file is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA +# 02110-1301, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + + +# Please send patches to . Submit a context +# diff and a properly formatted ChangeLog entry. +# +# Configuration subroutine to validate and canonicalize a configuration type. +# Supply the specified configuration type as an argument. +# If it is invalid, we print an error message on stderr and exit with code 1. +# Otherwise, we print the canonical config type on stdout and succeed. + +# This file is supposed to be the same for all GNU packages +# and recognize all the CPU types, system types and aliases +# that are meaningful with *any* GNU software. +# Each package is responsible for reporting which valid configurations +# it does not support. The user should be able to distinguish +# a failure to support a valid configuration from a meaningless +# configuration. + +# The goal of this file is to map all the various variations of a given +# machine specification into a single specification in the form: +# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM +# or in some cases, the newer four-part form: +# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM +# It is wrong to echo any other type of specification. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] CPU-MFR-OPSYS + $0 [OPTION] ALIAS + +Canonicalize a configuration name. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.sub ($timestamp) + +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, +2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" + exit 1 ;; + + *local*) + # First pass through any local machine types. + echo $1 + exit ;; + + * ) + break ;; + esac +done + +case $# in + 0) echo "$me: missing argument$help" >&2 + exit 1;; + 1) ;; + *) echo "$me: too many arguments$help" >&2 + exit 1;; +esac + +# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). +# Here we must recognize all the valid KERNEL-OS combinations. +maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` +case $maybe_os in + nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \ + uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \ + storm-chaos* | os2-emx* | rtmk-nova*) + os=-$maybe_os + basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` + ;; + *) + basic_machine=`echo $1 | sed 's/-[^-]*$//'` + if [ $basic_machine != $1 ] + then os=`echo $1 | sed 's/.*-/-/'` + else os=; fi + ;; +esac + +### Let's recognize common machines as not being operating systems so +### that things like config.sub decstation-3100 work. We also +### recognize some manufacturers as not being operating systems, so we +### can provide default operating systems below. +case $os in + -sun*os*) + # Prevent following clause from handling this invalid input. + ;; + -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ + -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ + -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ + -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ + -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ + -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ + -apple | -axis | -knuth | -cray) + os= + basic_machine=$1 + ;; + -sim | -cisco | -oki | -wec | -winbond) + os= + basic_machine=$1 + ;; + -scout) + ;; + -wrs) + os=-vxworks + basic_machine=$1 + ;; + -chorusos*) + os=-chorusos + basic_machine=$1 + ;; + -chorusrdb) + os=-chorusrdb + basic_machine=$1 + ;; + -hiux*) + os=-hiuxwe2 + ;; + -sco6) + os=-sco5v6 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco5) + os=-sco3.2v5 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco4) + os=-sco3.2v4 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2.[4-9]*) + os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2v[4-9]*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco5v6*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco*) + os=-sco3.2v2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -udk*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -isc) + os=-isc2.2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -clix*) + basic_machine=clipper-intergraph + ;; + -isc*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -lynx*) + os=-lynxos + ;; + -ptx*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` + ;; + -windowsnt*) + os=`echo $os | sed -e 's/windowsnt/winnt/'` + ;; + -psos*) + os=-psos + ;; + -mint | -mint[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; +esac + +# Decode aliases for certain CPU-COMPANY combinations. +case $basic_machine in + # Recognize the basic CPU types without company name. + # Some are omitted here because they have special meanings below. + 1750a | 580 \ + | a29k \ + | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ + | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ + | am33_2.0 \ + | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \ + | bfin \ + | c4x | clipper \ + | d10v | d30v | dlx | dsp16xx \ + | fido | fr30 | frv \ + | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ + | i370 | i860 | i960 | ia64 \ + | ip2k | iq2000 \ + | m32c | m32r | m32rle | m68000 | m68k | m88k \ + | maxq | mb | microblaze | mcore | mep \ + | mips | mipsbe | mipseb | mipsel | mipsle \ + | mips16 \ + | mips64 | mips64el \ + | mips64vr | mips64vrel \ + | mips64orion | mips64orionel \ + | mips64vr4100 | mips64vr4100el \ + | mips64vr4300 | mips64vr4300el \ + | mips64vr5000 | mips64vr5000el \ + | mips64vr5900 | mips64vr5900el \ + | mipsisa32 | mipsisa32el \ + | mipsisa32r2 | mipsisa32r2el \ + | mipsisa64 | mipsisa64el \ + | mipsisa64r2 | mipsisa64r2el \ + | mipsisa64sb1 | mipsisa64sb1el \ + | mipsisa64sr71k | mipsisa64sr71kel \ + | mipstx39 | mipstx39el \ + | mn10200 | mn10300 \ + | mt \ + | msp430 \ + | nios | nios2 \ + | ns16k | ns32k \ + | or32 \ + | pdp10 | pdp11 | pj | pjl \ + | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ + | pyramid \ + | score \ + | sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ + | sh64 | sh64le \ + | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ + | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ + | spu | strongarm \ + | tahoe | thumb | tic4x | tic80 | tron \ + | v850 | v850e \ + | we32k \ + | x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \ + | z8k) + basic_machine=$basic_machine-unknown + ;; + m6811 | m68hc11 | m6812 | m68hc12) + # Motorola 68HC11/12. + basic_machine=$basic_machine-unknown + os=-none + ;; + m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) + ;; + ms1) + basic_machine=mt-unknown + ;; + + riscv) + basic_machine=mipsriscvel-ucb + ;; + + # We use `pc' rather than `unknown' + # because (1) that's what they normally are, and + # (2) the word "unknown" tends to confuse beginning users. + i*86 | x86_64) + basic_machine=$basic_machine-pc + ;; + # Object if more than one company name word. + *-*-*) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; + # Recognize the basic CPU types with company name. + 580-* \ + | a29k-* \ + | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ + | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ + | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ + | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ + | avr-* | avr32-* \ + | bfin-* | bs2000-* \ + | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \ + | clipper-* | craynv-* | cydra-* \ + | d10v-* | d30v-* | dlx-* \ + | elxsi-* \ + | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ + | h8300-* | h8500-* \ + | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ + | i*86-* | i860-* | i960-* | ia64-* \ + | ip2k-* | iq2000-* \ + | m32c-* | m32r-* | m32rle-* \ + | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ + | m88110-* | m88k-* | maxq-* | mcore-* \ + | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ + | mips16-* \ + | mips64-* | mips64el-* \ + | mips64vr-* | mips64vrel-* \ + | mips64orion-* | mips64orionel-* \ + | mips64vr4100-* | mips64vr4100el-* \ + | mips64vr4300-* | mips64vr4300el-* \ + | mips64vr5000-* | mips64vr5000el-* \ + | mips64vr5900-* | mips64vr5900el-* \ + | mipsisa32-* | mipsisa32el-* \ + | mipsisa32r2-* | mipsisa32r2el-* \ + | mipsisa64-* | mipsisa64el-* \ + | mipsisa64r2-* | mipsisa64r2el-* \ + | mipsisa64sb1-* | mipsisa64sb1el-* \ + | mipsisa64sr71k-* | mipsisa64sr71kel-* \ + | mipstx39-* | mipstx39el-* \ + | mmix-* \ + | mt-* \ + | msp430-* \ + | nios-* | nios2-* \ + | none-* | np1-* | ns16k-* | ns32k-* \ + | orion-* \ + | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ + | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ + | pyramid-* \ + | romp-* | rs6000-* \ + | sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ + | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ + | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ + | sparclite-* \ + | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \ + | tahoe-* | thumb-* \ + | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ + | tron-* \ + | v850-* | v850e-* | vax-* \ + | we32k-* \ + | x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \ + | xstormy16-* | xtensa*-* \ + | ymp-* \ + | z8k-*) + ;; + # Recognize the basic CPU types without company name, with glob match. + xtensa*) + basic_machine=$basic_machine-unknown + ;; + # Recognize the various machine names and aliases which stand + # for a CPU type and a company and sometimes even an OS. + 386bsd) + basic_machine=i386-unknown + os=-bsd + ;; + 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) + basic_machine=m68000-att + ;; + 3b*) + basic_machine=we32k-att + ;; + a29khif) + basic_machine=a29k-amd + os=-udi + ;; + abacus) + basic_machine=abacus-unknown + ;; + adobe68k) + basic_machine=m68010-adobe + os=-scout + ;; + alliant | fx80) + basic_machine=fx80-alliant + ;; + altos | altos3068) + basic_machine=m68k-altos + ;; + am29k) + basic_machine=a29k-none + os=-bsd + ;; + amd64) + basic_machine=x86_64-pc + ;; + amd64-*) + basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + amdahl) + basic_machine=580-amdahl + os=-sysv + ;; + amiga | amiga-*) + basic_machine=m68k-unknown + ;; + amigaos | amigados) + basic_machine=m68k-unknown + os=-amigaos + ;; + amigaunix | amix) + basic_machine=m68k-unknown + os=-sysv4 + ;; + apollo68) + basic_machine=m68k-apollo + os=-sysv + ;; + apollo68bsd) + basic_machine=m68k-apollo + os=-bsd + ;; + aux) + basic_machine=m68k-apple + os=-aux + ;; + balance) + basic_machine=ns32k-sequent + os=-dynix + ;; + blackfin) + basic_machine=bfin-unknown + os=-linux + ;; + blackfin-*) + basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + c90) + basic_machine=c90-cray + os=-unicos + ;; + convex-c1) + basic_machine=c1-convex + os=-bsd + ;; + convex-c2) + basic_machine=c2-convex + os=-bsd + ;; + convex-c32) + basic_machine=c32-convex + os=-bsd + ;; + convex-c34) + basic_machine=c34-convex + os=-bsd + ;; + convex-c38) + basic_machine=c38-convex + os=-bsd + ;; + cray | j90) + basic_machine=j90-cray + os=-unicos + ;; + craynv) + basic_machine=craynv-cray + os=-unicosmp + ;; + cr16) + basic_machine=cr16-unknown + os=-elf + ;; + crds | unos) + basic_machine=m68k-crds + ;; + crisv32 | crisv32-* | etraxfs*) + basic_machine=crisv32-axis + ;; + cris | cris-* | etrax*) + basic_machine=cris-axis + ;; + crx) + basic_machine=crx-unknown + os=-elf + ;; + da30 | da30-*) + basic_machine=m68k-da30 + ;; + decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) + basic_machine=mips-dec + ;; + decsystem10* | dec10*) + basic_machine=pdp10-dec + os=-tops10 + ;; + decsystem20* | dec20*) + basic_machine=pdp10-dec + os=-tops20 + ;; + delta | 3300 | motorola-3300 | motorola-delta \ + | 3300-motorola | delta-motorola) + basic_machine=m68k-motorola + ;; + delta88) + basic_machine=m88k-motorola + os=-sysv3 + ;; + djgpp) + basic_machine=i586-pc + os=-msdosdjgpp + ;; + dpx20 | dpx20-*) + basic_machine=rs6000-bull + os=-bosx + ;; + dpx2* | dpx2*-bull) + basic_machine=m68k-bull + os=-sysv3 + ;; + ebmon29k) + basic_machine=a29k-amd + os=-ebmon + ;; + elxsi) + basic_machine=elxsi-elxsi + os=-bsd + ;; + encore | umax | mmax) + basic_machine=ns32k-encore + ;; + es1800 | OSE68k | ose68k | ose | OSE) + basic_machine=m68k-ericsson + os=-ose + ;; + fx2800) + basic_machine=i860-alliant + ;; + genix) + basic_machine=ns32k-ns + ;; + gmicro) + basic_machine=tron-gmicro + os=-sysv + ;; + go32) + basic_machine=i386-pc + os=-go32 + ;; + h3050r* | hiux*) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + h8300hms) + basic_machine=h8300-hitachi + os=-hms + ;; + h8300xray) + basic_machine=h8300-hitachi + os=-xray + ;; + h8500hms) + basic_machine=h8500-hitachi + os=-hms + ;; + harris) + basic_machine=m88k-harris + os=-sysv3 + ;; + hp300-*) + basic_machine=m68k-hp + ;; + hp300bsd) + basic_machine=m68k-hp + os=-bsd + ;; + hp300hpux) + basic_machine=m68k-hp + os=-hpux + ;; + hp3k9[0-9][0-9] | hp9[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k2[0-9][0-9] | hp9k31[0-9]) + basic_machine=m68000-hp + ;; + hp9k3[2-9][0-9]) + basic_machine=m68k-hp + ;; + hp9k6[0-9][0-9] | hp6[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k7[0-79][0-9] | hp7[0-79][0-9]) + basic_machine=hppa1.1-hp + ;; + hp9k78[0-9] | hp78[0-9]) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][13679] | hp8[0-9][13679]) + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][0-9] | hp8[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hppa-next) + os=-nextstep3 + ;; + hppaosf) + basic_machine=hppa1.1-hp + os=-osf + ;; + hppro) + basic_machine=hppa1.1-hp + os=-proelf + ;; + i370-ibm* | ibm*) + basic_machine=i370-ibm + ;; +# I'm not sure what "Sysv32" means. Should this be sysv3.2? + i*86v32) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv32 + ;; + i*86v4*) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv4 + ;; + i*86v) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv + ;; + i*86sol2) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-solaris2 + ;; + i386mach) + basic_machine=i386-mach + os=-mach + ;; + i386-vsta | vsta) + basic_machine=i386-unknown + os=-vsta + ;; + iris | iris4d) + basic_machine=mips-sgi + case $os in + -irix*) + ;; + *) + os=-irix4 + ;; + esac + ;; + isi68 | isi) + basic_machine=m68k-isi + os=-sysv + ;; + m68knommu) + basic_machine=m68k-unknown + os=-linux + ;; + m68knommu-*) + basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + m88k-omron*) + basic_machine=m88k-omron + ;; + magnum | m3230) + basic_machine=mips-mips + os=-sysv + ;; + merlin) + basic_machine=ns32k-utek + os=-sysv + ;; + mingw32) + basic_machine=i386-pc + os=-mingw32 + ;; + mingw32ce) + basic_machine=arm-unknown + os=-mingw32ce + ;; + miniframe) + basic_machine=m68000-convergent + ;; + *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; + mips3*-*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` + ;; + mips3*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown + ;; + monitor) + basic_machine=m68k-rom68k + os=-coff + ;; + morphos) + basic_machine=powerpc-unknown + os=-morphos + ;; + msdos) + basic_machine=i386-pc + os=-msdos + ;; + ms1-*) + basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` + ;; + mvs) + basic_machine=i370-ibm + os=-mvs + ;; + ncr3000) + basic_machine=i486-ncr + os=-sysv4 + ;; + netbsd386) + basic_machine=i386-unknown + os=-netbsd + ;; + netwinder) + basic_machine=armv4l-rebel + os=-linux + ;; + news | news700 | news800 | news900) + basic_machine=m68k-sony + os=-newsos + ;; + news1000) + basic_machine=m68030-sony + os=-newsos + ;; + news-3600 | risc-news) + basic_machine=mips-sony + os=-newsos + ;; + necv70) + basic_machine=v70-nec + os=-sysv + ;; + next | m*-next ) + basic_machine=m68k-next + case $os in + -nextstep* ) + ;; + -ns2*) + os=-nextstep2 + ;; + *) + os=-nextstep3 + ;; + esac + ;; + nh3000) + basic_machine=m68k-harris + os=-cxux + ;; + nh[45]000) + basic_machine=m88k-harris + os=-cxux + ;; + nindy960) + basic_machine=i960-intel + os=-nindy + ;; + mon960) + basic_machine=i960-intel + os=-mon960 + ;; + nonstopux) + basic_machine=mips-compaq + os=-nonstopux + ;; + np1) + basic_machine=np1-gould + ;; + nsr-tandem) + basic_machine=nsr-tandem + ;; + op50n-* | op60c-*) + basic_machine=hppa1.1-oki + os=-proelf + ;; + openrisc | openrisc-*) + basic_machine=or32-unknown + ;; + os400) + basic_machine=powerpc-ibm + os=-os400 + ;; + OSE68000 | ose68000) + basic_machine=m68000-ericsson + os=-ose + ;; + os68k) + basic_machine=m68k-none + os=-os68k + ;; + pa-hitachi) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + paragon) + basic_machine=i860-intel + os=-osf + ;; + parisc) + basic_machine=hppa-unknown + os=-linux + ;; + parisc-*) + basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + pbd) + basic_machine=sparc-tti + ;; + pbb) + basic_machine=m68k-tti + ;; + pc532 | pc532-*) + basic_machine=ns32k-pc532 + ;; + pc98) + basic_machine=i386-pc + ;; + pc98-*) + basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentium | p5 | k5 | k6 | nexgen | viac3) + basic_machine=i586-pc + ;; + pentiumpro | p6 | 6x86 | athlon | athlon_*) + basic_machine=i686-pc + ;; + pentiumii | pentium2 | pentiumiii | pentium3) + basic_machine=i686-pc + ;; + pentium4) + basic_machine=i786-pc + ;; + pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) + basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumpro-* | p6-* | 6x86-* | athlon-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentium4-*) + basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pn) + basic_machine=pn-gould + ;; + power) basic_machine=power-ibm + ;; + ppc) basic_machine=powerpc-unknown + ;; + ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppcle | powerpclittle | ppc-le | powerpc-little) + basic_machine=powerpcle-unknown + ;; + ppcle-* | powerpclittle-*) + basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64) basic_machine=powerpc64-unknown + ;; + ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64le | powerpc64little | ppc64-le | powerpc64-little) + basic_machine=powerpc64le-unknown + ;; + ppc64le-* | powerpc64little-*) + basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ps2) + basic_machine=i386-ibm + ;; + pw32) + basic_machine=i586-unknown + os=-pw32 + ;; + rdos) + basic_machine=i386-pc + os=-rdos + ;; + rom68k) + basic_machine=m68k-rom68k + os=-coff + ;; + rm[46]00) + basic_machine=mips-siemens + ;; + rtpc | rtpc-*) + basic_machine=romp-ibm + ;; + s390 | s390-*) + basic_machine=s390-ibm + ;; + s390x | s390x-*) + basic_machine=s390x-ibm + ;; + sa29200) + basic_machine=a29k-amd + os=-udi + ;; + sb1) + basic_machine=mipsisa64sb1-unknown + ;; + sb1el) + basic_machine=mipsisa64sb1el-unknown + ;; + sde) + basic_machine=mipsisa32-sde + os=-elf + ;; + sei) + basic_machine=mips-sei + os=-seiux + ;; + sequent) + basic_machine=i386-sequent + ;; + sh) + basic_machine=sh-hitachi + os=-hms + ;; + sh5el) + basic_machine=sh5le-unknown + ;; + sh64) + basic_machine=sh64-unknown + ;; + sparclite-wrs | simso-wrs) + basic_machine=sparclite-wrs + os=-vxworks + ;; + sps7) + basic_machine=m68k-bull + os=-sysv2 + ;; + spur) + basic_machine=spur-unknown + ;; + st2000) + basic_machine=m68k-tandem + ;; + stratus) + basic_machine=i860-stratus + os=-sysv4 + ;; + sun2) + basic_machine=m68000-sun + ;; + sun2os3) + basic_machine=m68000-sun + os=-sunos3 + ;; + sun2os4) + basic_machine=m68000-sun + os=-sunos4 + ;; + sun3os3) + basic_machine=m68k-sun + os=-sunos3 + ;; + sun3os4) + basic_machine=m68k-sun + os=-sunos4 + ;; + sun4os3) + basic_machine=sparc-sun + os=-sunos3 + ;; + sun4os4) + basic_machine=sparc-sun + os=-sunos4 + ;; + sun4sol2) + basic_machine=sparc-sun + os=-solaris2 + ;; + sun3 | sun3-*) + basic_machine=m68k-sun + ;; + sun4) + basic_machine=sparc-sun + ;; + sun386 | sun386i | roadrunner) + basic_machine=i386-sun + ;; + sv1) + basic_machine=sv1-cray + os=-unicos + ;; + symmetry) + basic_machine=i386-sequent + os=-dynix + ;; + t3e) + basic_machine=alphaev5-cray + os=-unicos + ;; + t90) + basic_machine=t90-cray + os=-unicos + ;; + tic54x | c54x*) + basic_machine=tic54x-unknown + os=-coff + ;; + tic55x | c55x*) + basic_machine=tic55x-unknown + os=-coff + ;; + tic6x | c6x*) + basic_machine=tic6x-unknown + os=-coff + ;; + tile*) + basic_machine=tile-unknown + os=-linux-gnu + ;; + tx39) + basic_machine=mipstx39-unknown + ;; + tx39el) + basic_machine=mipstx39el-unknown + ;; + toad1) + basic_machine=pdp10-xkl + os=-tops20 + ;; + tower | tower-32) + basic_machine=m68k-ncr + ;; + tpf) + basic_machine=s390x-ibm + os=-tpf + ;; + udi29k) + basic_machine=a29k-amd + os=-udi + ;; + ultra3) + basic_machine=a29k-nyu + os=-sym1 + ;; + v810 | necv810) + basic_machine=v810-nec + os=-none + ;; + vaxv) + basic_machine=vax-dec + os=-sysv + ;; + vms) + basic_machine=vax-dec + os=-vms + ;; + vpp*|vx|vx-*) + basic_machine=f301-fujitsu + ;; + vxworks960) + basic_machine=i960-wrs + os=-vxworks + ;; + vxworks68) + basic_machine=m68k-wrs + os=-vxworks + ;; + vxworks29k) + basic_machine=a29k-wrs + os=-vxworks + ;; + w65*) + basic_machine=w65-wdc + os=-none + ;; + w89k-*) + basic_machine=hppa1.1-winbond + os=-proelf + ;; + xbox) + basic_machine=i686-pc + os=-mingw32 + ;; + xps | xps100) + basic_machine=xps100-honeywell + ;; + ymp) + basic_machine=ymp-cray + os=-unicos + ;; + z8k-*-coff) + basic_machine=z8k-unknown + os=-sim + ;; + none) + basic_machine=none-none + os=-none + ;; + +# Here we handle the default manufacturer of certain CPU types. It is in +# some cases the only manufacturer, in others, it is the most popular. + w89k) + basic_machine=hppa1.1-winbond + ;; + op50n) + basic_machine=hppa1.1-oki + ;; + op60c) + basic_machine=hppa1.1-oki + ;; + romp) + basic_machine=romp-ibm + ;; + mmix) + basic_machine=mmix-knuth + ;; + rs6000) + basic_machine=rs6000-ibm + ;; + vax) + basic_machine=vax-dec + ;; + pdp10) + # there are many clones, so DEC is not a safe bet + basic_machine=pdp10-unknown + ;; + pdp11) + basic_machine=pdp11-dec + ;; + we32k) + basic_machine=we32k-att + ;; + sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele) + basic_machine=sh-unknown + ;; + sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v) + basic_machine=sparc-sun + ;; + cydra) + basic_machine=cydra-cydrome + ;; + orion) + basic_machine=orion-highlevel + ;; + orion105) + basic_machine=clipper-highlevel + ;; + mac | mpw | mac-mpw) + basic_machine=m68k-apple + ;; + pmac | pmac-mpw) + basic_machine=powerpc-apple + ;; + *-unknown) + # Make sure to match an already-canonicalized machine name. + ;; + *) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; +esac + +# Here we canonicalize certain aliases for manufacturers. +case $basic_machine in + *-digital*) + basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` + ;; + *-commodore*) + basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` + ;; + *) + ;; +esac + +# Decode manufacturer-specific aliases for certain operating systems. + +if [ x"$os" != x"" ] +then +case $os in + # First match some system type aliases + # that might get confused with valid system types. + # -solaris* is a basic system type, with this one exception. + -solaris1 | -solaris1.*) + os=`echo $os | sed -e 's|solaris1|sunos4|'` + ;; + -solaris) + os=-solaris2 + ;; + -svr4*) + os=-sysv4 + ;; + -unixware*) + os=-sysv4.2uw + ;; + -gnu/linux*) + os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` + ;; + # First accept the basic system types. + # The portable systems comes first. + # Each alternative MUST END IN A *, to match a version number. + # -sysv* is not here because it comes later, after sysvr4. + -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ + | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\ + | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ + | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ + | -aos* \ + | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ + | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ + | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ + | -openbsd* | -solidbsd* \ + | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ + | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ + | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ + | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ + | -chorusos* | -chorusrdb* \ + | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ + | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \ + | -uxpv* | -beos* | -mpeix* | -udk* \ + | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ + | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ + | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ + | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ + | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ + | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ + | -skyos* | -haiku* | -rdos* | -toppers* | -drops*) + # Remember, each alternative MUST END IN *, to match a version number. + ;; + -qnx*) + case $basic_machine in + x86-* | i*86-*) + ;; + *) + os=-nto$os + ;; + esac + ;; + -nto-qnx*) + ;; + -nto*) + os=`echo $os | sed -e 's|nto|nto-qnx|'` + ;; + -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ + | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ + | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) + ;; + -mac*) + os=`echo $os | sed -e 's|mac|macos|'` + ;; + -linux-dietlibc) + os=-linux-dietlibc + ;; + -linux*) + os=`echo $os | sed -e 's|linux|linux-gnu|'` + ;; + -sunos5*) + os=`echo $os | sed -e 's|sunos5|solaris2|'` + ;; + -sunos6*) + os=`echo $os | sed -e 's|sunos6|solaris3|'` + ;; + -opened*) + os=-openedition + ;; + -os400*) + os=-os400 + ;; + -wince*) + os=-wince + ;; + -osfrose*) + os=-osfrose + ;; + -osf*) + os=-osf + ;; + -utek*) + os=-bsd + ;; + -dynix*) + os=-bsd + ;; + -acis*) + os=-aos + ;; + -atheos*) + os=-atheos + ;; + -syllable*) + os=-syllable + ;; + -386bsd) + os=-bsd + ;; + -ctix* | -uts*) + os=-sysv + ;; + -nova*) + os=-rtmk-nova + ;; + -ns2 ) + os=-nextstep2 + ;; + -nsk*) + os=-nsk + ;; + # Preserve the version number of sinix5. + -sinix5.*) + os=`echo $os | sed -e 's|sinix|sysv|'` + ;; + -sinix*) + os=-sysv4 + ;; + -tpf*) + os=-tpf + ;; + -triton*) + os=-sysv3 + ;; + -oss*) + os=-sysv3 + ;; + -svr4) + os=-sysv4 + ;; + -svr3) + os=-sysv3 + ;; + -sysvr4) + os=-sysv4 + ;; + # This must come after -sysvr4. + -sysv*) + ;; + -ose*) + os=-ose + ;; + -es1800*) + os=-ose + ;; + -xenix) + os=-xenix + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + os=-mint + ;; + -aros*) + os=-aros + ;; + -kaos*) + os=-kaos + ;; + -zvmoe) + os=-zvmoe + ;; + -none) + ;; + *) + # Get rid of the `-' at the beginning of $os. + os=`echo $os | sed 's/[^-]*-//'` + echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 + exit 1 + ;; +esac +else + +# Here we handle the default operating systems that come with various machines. +# The value should be what the vendor currently ships out the door with their +# machine or put another way, the most popular os provided with the machine. + +# Note that if you're going to try to match "-MANUFACTURER" here (say, +# "-sun"), then you have to tell the case statement up towards the top +# that MANUFACTURER isn't an operating system. Otherwise, code above +# will signal an error saying that MANUFACTURER isn't an operating +# system, and we'll never get to this point. + +case $basic_machine in + score-*) + os=-elf + ;; + spu-*) + os=-elf + ;; + *-acorn) + os=-riscix1.2 + ;; + arm*-rebel) + os=-linux + ;; + arm*-semi) + os=-aout + ;; + c4x-* | tic4x-*) + os=-coff + ;; + # This must come before the *-dec entry. + pdp10-*) + os=-tops20 + ;; + pdp11-*) + os=-none + ;; + *-dec | vax-*) + os=-ultrix4.2 + ;; + m68*-apollo) + os=-domain + ;; + i386-sun) + os=-sunos4.0.2 + ;; + m68000-sun) + os=-sunos3 + # This also exists in the configure program, but was not the + # default. + # os=-sunos4 + ;; + m68*-cisco) + os=-aout + ;; + mep-*) + os=-elf + ;; + mips*-cisco) + os=-elf + ;; + mips*-*) + os=-elf + ;; + or32-*) + os=-coff + ;; + *-tti) # must be before sparc entry or we get the wrong os. + os=-sysv3 + ;; + sparc-* | *-sun) + os=-sunos4.1.1 + ;; + *-be) + os=-beos + ;; + *-haiku) + os=-haiku + ;; + *-ibm) + os=-aix + ;; + *-knuth) + os=-mmixware + ;; + *-wec) + os=-proelf + ;; + *-winbond) + os=-proelf + ;; + *-oki) + os=-proelf + ;; + *-hp) + os=-hpux + ;; + *-hitachi) + os=-hiux + ;; + i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) + os=-sysv + ;; + *-cbm) + os=-amigaos + ;; + *-dg) + os=-dgux + ;; + *-dolphin) + os=-sysv3 + ;; + m68k-ccur) + os=-rtu + ;; + m88k-omron*) + os=-luna + ;; + *-next ) + os=-nextstep + ;; + *-sequent) + os=-ptx + ;; + *-crds) + os=-unos + ;; + *-ns) + os=-genix + ;; + i370-*) + os=-mvs + ;; + *-next) + os=-nextstep3 + ;; + *-gould) + os=-sysv + ;; + *-highlevel) + os=-bsd + ;; + *-encore) + os=-bsd + ;; + *-sgi) + os=-irix + ;; + *-siemens) + os=-sysv4 + ;; + *-masscomp) + os=-rtu + ;; + f30[01]-fujitsu | f700-fujitsu) + os=-uxpv + ;; + *-rom68k) + os=-coff + ;; + *-*bug) + os=-coff + ;; + *-apple) + os=-macos + ;; + *-atari*) + os=-mint + ;; + *) + os=-none + ;; +esac +fi + +# Here we handle the case where we know the os, and the CPU type, but not the +# manufacturer. We pick the logical manufacturer. +vendor=unknown +case $basic_machine in + *-unknown) + case $os in + -riscix*) + vendor=acorn + ;; + -sunos*) + vendor=sun + ;; + -aix*) + vendor=ibm + ;; + -beos*) + vendor=be + ;; + -hpux*) + vendor=hp + ;; + -mpeix*) + vendor=hp + ;; + -hiux*) + vendor=hitachi + ;; + -unos*) + vendor=crds + ;; + -dgux*) + vendor=dg + ;; + -luna*) + vendor=omron + ;; + -genix*) + vendor=ns + ;; + -mvs* | -opened*) + vendor=ibm + ;; + -os400*) + vendor=ibm + ;; + -ptx*) + vendor=sequent + ;; + -tpf*) + vendor=ibm + ;; + -vxsim* | -vxworks* | -windiss*) + vendor=wrs + ;; + -aux*) + vendor=apple + ;; + -hms*) + vendor=hitachi + ;; + -mpw* | -macos*) + vendor=apple + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + vendor=atari + ;; + -vos*) + vendor=stratus + ;; + esac + basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` + ;; +esac + +echo $basic_machine$os +exit + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/riscv-pk/scripts/install.sh b/riscv-pk/scripts/install.sh new file mode 100755 index 0000000..89fc9b0 --- /dev/null +++ b/riscv-pk/scripts/install.sh @@ -0,0 +1,238 @@ +#! /bin/sh +# +# install - install a program, script, or datafile +# This comes from X11R5. +# +# Calling this script install-sh is preferred over install.sh, to prevent +# `make' implicit rules from creating a file called install from it +# when there is no Makefile. +# +# This script is compatible with the BSD install script, but was written +# from scratch. +# + + +# set DOITPROG to echo to test this script + +# Don't use :- since 4.3BSD and earlier shells don't like it. +doit="${DOITPROG-}" + + +# put in absolute paths if you don't have them in your path; or use env. vars. + +mvprog="${MVPROG-mv}" +cpprog="${CPPROG-cp}" +chmodprog="${CHMODPROG-chmod}" +chownprog="${CHOWNPROG-chown}" +chgrpprog="${CHGRPPROG-chgrp}" +stripprog="${STRIPPROG-strip}" +rmprog="${RMPROG-rm}" +mkdirprog="${MKDIRPROG-mkdir}" + +tranformbasename="" +transform_arg="" +instcmd="$mvprog" +chmodcmd="$chmodprog 0755" +chowncmd="" +chgrpcmd="" +stripcmd="" +rmcmd="$rmprog -f" +mvcmd="$mvprog" +src="" +dst="" +dir_arg="" + +while [ x"$1" != x ]; do + case $1 in + -c) instcmd="$cpprog" + shift + continue;; + + -d) dir_arg=true + shift + continue;; + + -m) chmodcmd="$chmodprog $2" + shift + shift + continue;; + + -o) chowncmd="$chownprog $2" + shift + shift + continue;; + + -g) chgrpcmd="$chgrpprog $2" + shift + shift + continue;; + + -s) stripcmd="$stripprog" + shift + continue;; + + -t=*) transformarg=`echo $1 | sed 's/-t=//'` + shift + continue;; + + -b=*) transformbasename=`echo $1 | sed 's/-b=//'` + shift + continue;; + + *) if [ x"$src" = x ] + then + src=$1 + else + # this colon is to work around a 386BSD /bin/sh bug + : + dst=$1 + fi + shift + continue;; + esac +done + +if [ x"$src" = x ] +then + echo "install: no input file specified" + exit 1 +else + true +fi + +if [ x"$dir_arg" != x ]; then + dst=$src + src="" + + if [ -d $dst ]; then + instcmd=: + else + instcmd=mkdir + fi +else + +# Waiting for this to be detected by the "$instcmd $src $dsttmp" command +# might cause directories to be created, which would be especially bad +# if $src (and thus $dsttmp) contains '*'. + + if [ -f $src -o -d $src ] + then + true + else + echo "install: $src does not exist" + exit 1 + fi + + if [ x"$dst" = x ] + then + echo "install: no destination specified" + exit 1 + else + true + fi + +# If destination is a directory, append the input filename; if your system +# does not like double slashes in filenames, you may need to add some logic + + if [ -d $dst ] + then + dst="$dst"/`basename $src` + else + true + fi +fi + +## this sed command emulates the dirname command +dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` + +# Make sure that the destination directory exists. +# this part is taken from Noah Friedman's mkinstalldirs script + +# Skip lots of stat calls in the usual case. +if [ ! -d "$dstdir" ]; then +defaultIFS=' +' +IFS="${IFS-${defaultIFS}}" + +oIFS="${IFS}" +# Some sh's can't handle IFS=/ for some reason. +IFS='%' +set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'` +IFS="${oIFS}" + +pathcomp='' + +while [ $# -ne 0 ] ; do + pathcomp="${pathcomp}${1}" + shift + + if [ ! -d "${pathcomp}" ] ; + then + $mkdirprog "${pathcomp}" + else + true + fi + + pathcomp="${pathcomp}/" +done +fi + +if [ x"$dir_arg" != x ] +then + $doit $instcmd $dst && + + if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi && + if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi && + if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi && + if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi +else + +# If we're going to rename the final executable, determine the name now. + + if [ x"$transformarg" = x ] + then + dstfile=`basename $dst` + else + dstfile=`basename $dst $transformbasename | + sed $transformarg`$transformbasename + fi + +# don't allow the sed command to completely eliminate the filename + + if [ x"$dstfile" = x ] + then + dstfile=`basename $dst` + else + true + fi + +# Make a temp file name in the proper directory. + + dsttmp=$dstdir/#inst.$$# + +# Move or copy the file name to the temp name + + $doit $instcmd $src $dsttmp && + + trap "rm -f ${dsttmp}" 0 && + +# and set any options; do chmod last to preserve setuid bits + +# If any of these fail, we abort the whole thing. If we want to +# ignore errors from any of these, just make sure not to ignore +# errors from the above "$doit $instcmd $src $dsttmp" command. + + if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi && + if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi && + if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi && + if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi && + +# Now rename the file to the real destination. + + $doit $rmcmd -f $dstdir/$dstfile && + $doit $mvcmd $dsttmp $dstdir/$dstfile + +fi && + + +exit 0 diff --git a/riscv-pk/scripts/mk-install-dirs.sh b/riscv-pk/scripts/mk-install-dirs.sh new file mode 100755 index 0000000..644b5f7 --- /dev/null +++ b/riscv-pk/scripts/mk-install-dirs.sh @@ -0,0 +1,40 @@ +#! /bin/sh +# mkinstalldirs --- make directory hierarchy +# Author: Noah Friedman +# Created: 1993-05-16 +# Public domain + +# $Id: mkinstalldirs,v 1.1 2003/09/09 22:24:03 mhampton Exp $ + +errstatus=0 + +for file +do + set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'` + shift + + pathcomp= + for d + do + pathcomp="$pathcomp$d" + case "$pathcomp" in + -* ) pathcomp=./$pathcomp ;; + esac + + if test ! -d "$pathcomp"; then + echo "mkdir $pathcomp" 1>&2 + + mkdir "$pathcomp" || lasterr=$? + + if test ! -d "$pathcomp"; then + errstatus=$lasterr + fi + fi + + pathcomp="$pathcomp/" + done +done + +exit $errstatus + +# mkinstalldirs ends here diff --git a/riscv-pk/scripts/vcs-version.sh b/riscv-pk/scripts/vcs-version.sh new file mode 100755 index 0000000..31fae86 --- /dev/null +++ b/riscv-pk/scripts/vcs-version.sh @@ -0,0 +1,117 @@ +#!/bin/bash +#========================================================================= +# vcs-version.sh [options] [src-dir] +#========================================================================= +# +# -h Display this message +# -v Verbose mode +# +# This script will create a version string by querying a version control +# system. The string is appropriate for use in installations and +# distributions. Currently this script assumes we are using git as our +# version control system but it would be possible to check and see if we +# are using an alternative version control system and create a version +# string appropriately. +# +# The script uses git describe plus a few other git commands to create a +# version strings in the following format: +# +# X.Y[-Z-gN][-dirty] +# +# where X is the major release, Y is the minor release, Z is the number +# of commits since the X.Y release, N is an eight digit abbreviated SHA +# hash of the most recent commit and the dirty suffix is appended when +# the working directory used to create the installation or distribution +# is not a pristine checkout. Here are some example version strings: +# +# 0.0 : initial import +# 0.0-3-g99ef6933 : 3rd commit since initial import (N=99ef6933) +# 1.0 : release 1.0 +# 1.1-12-g3487ab12 : 12th commit since release 1.1 (N=3487ab12) +# 1.1-12-g3487ab12-dirty : 12th commit since release 1.1 (N=3487ab12) +# +# The last example is from a dirty working directory. To find the last +# release, the script looks for the last tag (does not need to be an +# annotated tag, but probably should be) which matches the format rel-*. +# If there is no such tag in the history, then the script uses 0.0 as +# the release number and counts the total number of commits since the +# original import for the commit count. +# +# If the current directory is not within the working directory, then the +# path to the source directory should be supplied on the command line. +# +# Author : Christopher Batten +# Date : August 5, 2009 + +set -e + +#------------------------------------------------------------------------- +# Command line parsing +#------------------------------------------------------------------------- + +if ( test "$1" = "-h" ); then + echo "" + sed -n '3p' $0 | sed -e 's/#//' + sed -n '5,/^$/p' $0 | sed -e 's/#//' + exit 1 +fi + +# Source directory command line option + +src_dir="." +if ( test -n "$1" ); then + src_dir="$1" +fi + +#------------------------------------------------------------------------- +# Verify source directory +#------------------------------------------------------------------------- +# If the source directory is not a git working directory output a +# question mark. A distribution will not be in a working directory, but +# the build system should be structured such that this script is not +# executed (and instead the version information should probably come +# from configure). If the user does not specify a source directory use +# the current directory. + +if !( git rev-parse --is-inside-work-tree &> /dev/null ); then + echo "?" + exit 1; +fi + +top_dir=`git rev-parse --show-cdup` +cd ./${top_dir} + +#------------------------------------------------------------------------- +# Create the version string +#------------------------------------------------------------------------- +# See if we can do a describe based on a tag and if not use a default +# release number of 0.0 so that we always get canonical version number + +if ( git describe --tags --match "rel-*" &> /dev/null ); then + ver_str=`git describe --tags --match "rel-*" | sed 's/rel-//'` +else + ver_num="0.0" + ver_commits=`git rev-list --all | wc -l | tr -d " "` + ver_sha=`git describe --tags --match "rel-*" --always` + ver_str="${ver_num}-${ver_commits}-g${ver_sha}" +fi + +# Add a dirty suffix if working directory is dirty + +if !( git diff --quiet ); then + ver_str="${ver_str}-dirty" +else + untracked=`git ls-files --directory --exclude-standard --others -t` + if ( test -n "${untracked}" ); then + ver_str="${ver_str}-dirty" + fi +fi + +# Output the final version string + +echo "${ver_str}" + +# Final exit status + +exit 0; + diff --git a/riscv-pk/util/snprintf.c b/riscv-pk/util/snprintf.c new file mode 100644 index 0000000..1544a6c --- /dev/null +++ b/riscv-pk/util/snprintf.c @@ -0,0 +1,98 @@ +// See LICENSE for license details. + +#include +#include +#include +#include + +int vsnprintf(char* out, size_t n, const char* s, va_list vl) +{ + bool format = false; + bool longarg = false; + size_t pos = 0; + for( ; *s; s++) + { + if(format) + { + switch(*s) + { + case 'l': + longarg = true; + break; + case 'p': + longarg = true; + if (++pos < n) out[pos-1] = '0'; + if (++pos < n) out[pos-1] = 'x'; + case 'x': + { + long num = longarg ? va_arg(vl, long) : va_arg(vl, int); + for(int i = 2*(longarg ? sizeof(long) : sizeof(int))-1; i >= 0; i--) { + int d = (num >> (4*i)) & 0xF; + if (++pos < n) out[pos-1] = (d < 10 ? '0'+d : 'a'+d-10); + } + longarg = false; + format = false; + break; + } + case 'd': + { + long num = longarg ? va_arg(vl, long) : va_arg(vl, int); + if (num < 0) { + num = -num; + if (++pos < n) out[pos-1] = '-'; + } + long digits = 1; + for (long nn = num; nn /= 10; digits++) + ; + for (int i = digits-1; i >= 0; i--) { + if (pos + i + 1 < n) out[pos + i] = '0' + (num % 10); + num /= 10; + } + pos += digits; + longarg = false; + format = false; + break; + } + case 's': + { + const char* s2 = va_arg(vl, const char*); + while (*s2) { + if (++pos < n) + out[pos-1] = *s2; + s2++; + } + longarg = false; + format = false; + break; + } + case 'c': + { + if (++pos < n) out[pos-1] = (char)va_arg(vl,int); + longarg = false; + format = false; + break; + } + default: + break; + } + } + else if(*s == '%') + format = true; + else + if (++pos < n) out[pos-1] = *s; + } + if (pos < n) + out[pos] = 0; + else if (n) + out[n-1] = 0; + return pos; +} + +int snprintf(char* out, size_t n, const char* s, ...) +{ + va_list vl; + va_start(vl, s); + int res = vsnprintf(out, n, s, vl); + va_end(vl); + return res; +} diff --git a/riscv-pk/util/string.c b/riscv-pk/util/string.c new file mode 100644 index 0000000..41855c2 --- /dev/null +++ b/riscv-pk/util/string.c @@ -0,0 +1,90 @@ +#include +#include +#include + +void* memcpy(void* dest, const void* src, size_t len) +{ + const char* s = src; + char *d = dest; + + if ((((uintptr_t)dest | (uintptr_t)src) & (sizeof(uintptr_t)-1)) == 0) { + while ((void*)d < (dest + len - (sizeof(uintptr_t)-1))) { + *(uintptr_t*)d = *(const uintptr_t*)s; + d += sizeof(uintptr_t); + s += sizeof(uintptr_t); + } + } + + while (d < (char*)(dest + len)) + *d++ = *s++; + + return dest; +} + +void* memset(void* dest, int byte, size_t len) +{ + if ((((uintptr_t)dest | len) & (sizeof(uintptr_t)-1)) == 0) { + uintptr_t word = byte & 0xFF; + word |= word << 8; + word |= word << 16; + word |= word << 16 << 16; + + uintptr_t *d = dest; + while (d < (uintptr_t*)(dest + len)) + *d++ = word; + } else { + char *d = dest; + while (d < (char*)(dest + len)) + *d++ = byte; + } + return dest; +} + +size_t strlen(const char *s) +{ + const char *p = s; + while (*p) + p++; + return p - s; +} + +int strcmp(const char* s1, const char* s2) +{ + unsigned char c1, c2; + + do { + c1 = *s1++; + c2 = *s2++; + } while (c1 != 0 && c1 == c2); + + return c1 - c2; +} + +char* strcpy(char* dest, const char* src) +{ + char* d = dest; + while ((*d++ = *src++)) + ; + return dest; +} + +long atol(const char* str) +{ + long res = 0; + int sign = 0; + + while (*str == ' ') + str++; + + if (*str == '-' || *str == '+') { + sign = *str == '-'; + str++; + } + + while (*str) { + res *= 10; + res += *str++ - '0'; + } + + return sign ? -res : res; +} diff --git a/riscv-pk/util/util.ac b/riscv-pk/util/util.ac new file mode 100644 index 0000000..e69de29 diff --git a/riscv-pk/util/util.mk.in b/riscv-pk/util/util.mk.in new file mode 100644 index 0000000..abbdbd1 --- /dev/null +++ b/riscv-pk/util/util.mk.in @@ -0,0 +1,9 @@ +util_subproject_deps = \ + +util_hdrs = \ + +util_c_srcs = \ + snprintf.c \ + string.c \ + +util_asm_srcs = \