diff --git a/conf/zabbix_agentd.conf b/conf/zabbix_agentd.conf
deleted file mode 100644
index f5921d5..0000000
--- a/conf/zabbix_agentd.conf
+++ /dev/null
@@ -1,547 +0,0 @@
-# This is a configuration file for Zabbix agent daemon (Unix)
-# To get more information about Zabbix, visit http://www.zabbix.com
-
-############ GENERAL PARAMETERS #################
-
-### Option: PidFile
-#	Name of PID file.
-#
-# Mandatory: no
-# Default:
-# PidFile=/tmp/zabbix_agentd.pid
-
-### Option: LogType
-#	Specifies where log messages are written to:
-#		system  - syslog
-#		file    - file specified with LogFile parameter
-#		console - standard output
-#
-# Mandatory: no
-# Default:
-# LogType=file
-
-### Option: LogFile
-#	Log file name for LogType 'file' parameter.
-#
-# Mandatory: yes, if LogType is set to file, otherwise no
-# Default:
-# LogFile=
-
-LogFile=/tmp/zabbix_agentd.log
-
-### Option: LogFileSize
-#	Maximum size of log file in MB.
-#	0 - disable automatic log rotation.
-#
-# Mandatory: no
-# Range: 0-1024
-# Default:
-# LogFileSize=1
-
-### Option: DebugLevel
-#	Specifies debug level:
-#	0 - basic information about starting and stopping of Zabbix processes
-#	1 - critical information
-#	2 - error information
-#	3 - warnings
-#	4 - for debugging (produces lots of information)
-#	5 - extended debugging (produces even more information)
-#
-# Mandatory: no
-# Range: 0-5
-# Default:
-# DebugLevel=3
-
-### Option: SourceIP
-#	Source IP address for outgoing connections.
-#
-# Mandatory: no
-# Default:
-# SourceIP=
-
-### Option: AllowKey
-#	Allow execution of item keys matching pattern.
-#	Multiple keys matching rules may be defined in combination with DenyKey.
-#	Key pattern is wildcard expression, which support "*" character to match any number of any characters in certain position. It might be used in both key name and key arguments.
-#	Parameters are processed one by one according their appearance order.
-#	If no AllowKey or DenyKey rules defined, all keys are allowed.
-#
-# Mandatory: no
-
-### Option: DenyKey
-#	Deny execution of items keys matching pattern.
-#	Multiple keys matching rules may be defined in combination with AllowKey.
-#	Key pattern is wildcard expression, which support "*" character to match any number of any characters in certain position. It might be used in both key name and key arguments.
-#	Parameters are processed one by one according their appearance order.
-#	If no AllowKey or DenyKey rules defined, all keys are allowed.
-#       Unless another system.run[*] rule is specified DenyKey=system.run[*] is added by default.
-#
-# Mandatory: no
-# Default:
-# DenyKey=system.run[*]
-
-### Option: EnableRemoteCommands - Deprecated, use AllowKey=system.run[*] or DenyKey=system.run[*] instead
-#	Internal alias for AllowKey/DenyKey parameters depending on value:
-#	0 - DenyKey=system.run[*]
-#	1 - AllowKey=system.run[*]
-#
-# Mandatory: no
-
-### Option: LogRemoteCommands
-#	Enable logging of executed shell commands as warnings.
-#	0 - disabled
-#	1 - enabled
-#
-# Mandatory: no
-# Default:
-# LogRemoteCommands=0
-
-##### Passive checks related
-
-### Option: Server
-#	List of comma delimited IP addresses, optionally in CIDR notation, or DNS names of Zabbix servers and Zabbix proxies.
-#	Incoming connections will be accepted only from the hosts listed here.
-#	If IPv6 support is enabled then '127.0.0.1', '::127.0.0.1', '::ffff:127.0.0.1' are treated equally
-#	and '::/0' will allow any IPv4 or IPv6 address.
-#	'0.0.0.0/0' can be used to allow any IPv4 address.
-#	Example: Server=127.0.0.1,192.168.1.0/24,::1,2001:db8::/32,zabbix.example.com
-#
-# Mandatory: yes, if StartAgents is not explicitly set to 0
-# Default:
-# Server=
-
-Server=127.0.0.1
-
-### Option: ListenPort
-#	Agent will listen on this port for connections from the server.
-#
-# Mandatory: no
-# Range: 1024-32767
-# Default:
-# ListenPort=10050
-
-### Option: ListenIP
-#	List of comma delimited IP addresses that the agent should listen on.
-#	First IP address is sent to Zabbix server if connecting to it to retrieve list of active checks.
-#
-# Mandatory: no
-# Default:
-# ListenIP=0.0.0.0
-
-### Option: StartAgents
-#	Number of pre-forked instances of zabbix_agentd that process passive checks.
-#	If set to 0, disables passive checks and the agent will not listen on any TCP port.
-#
-# Mandatory: no
-# Range: 0-100
-# Default:
-# StartAgents=3
-
-##### Active checks related
-
-### Option: ServerActive
-#	Zabbix server/proxy address or cluster configuration to get active checks from.
-#	Server/proxy address is IP address or DNS name and optional port separated by colon.
-#	Cluster configuration is one or more server addresses separated by semicolon.
-#	Multiple Zabbix servers/clusters and Zabbix proxies can be specified, separated by comma.
-#	More than one Zabbix proxy should not be specified from each Zabbix server/cluster.
-#	If Zabbix proxy is specified then Zabbix server/cluster for that proxy should not be specified.
-#	Multiple comma-delimited addresses can be provided to use several independent Zabbix servers in parallel. Spaces are allowed.
-#	If port is not specified, default port is used.
-#	IPv6 addresses must be enclosed in square brackets if port for that host is specified.
-#	If port is not specified, square brackets for IPv6 addresses are optional.
-#	If this parameter is not specified, active checks are disabled.
-#	Example for Zabbix proxy:
-#		ServerActive=127.0.0.1:10051
-#	Example for multiple servers:
-#		ServerActive=127.0.0.1:20051,zabbix.domain,[::1]:30051,::1,[12fc::1]
-#	Example for high availability:
-#		ServerActive=zabbix.cluster.node1;zabbix.cluster.node2:20051;zabbix.cluster.node3
-#	Example for high availability with two clusters and one server:
-#		ServerActive=zabbix.cluster.node1;zabbix.cluster.node2:20051,zabbix.cluster2.node1;zabbix.cluster2.node2,zabbix.domain
-#
-# Mandatory: no
-# Default:
-# ServerActive=
-
-ServerActive=127.0.0.1
-
-### Option: Hostname
-#	List of comma delimited unique, case sensitive hostnames.
-#	Required for active checks and must match hostnames as configured on the server.
-#	Value is acquired from HostnameItem if undefined.
-#
-# Mandatory: no
-# Default:
-# Hostname=
-
-Hostname=Zabbix server
-
-### Option: HostnameItem
-#	Item used for generating Hostname if it is undefined. Ignored if Hostname is defined.
-#	Does not support UserParameters or aliases.
-#
-# Mandatory: no
-# Default:
-# HostnameItem=system.hostname
-
-### Option: HostMetadata
-#	Optional parameter that defines host metadata.
-#	Host metadata is used at host auto-registration process.
-#	An agent will issue an error and not start if the value is over limit of 2034 bytes.
-#	If not defined, value will be acquired from HostMetadataItem.
-#
-# Mandatory: no
-# Range: 0-2034 bytes
-# Default:
-# HostMetadata=
-
-### Option: HostMetadataItem
-#	Optional parameter that defines an item used for getting host metadata.
-#	Host metadata is used at host auto-registration process.
-#	During an auto-registration request an agent will log a warning message if
-#	the value returned by specified item is over limit of 65535 characters.
-#	This option is only used when HostMetadata is not defined.
-#
-# Mandatory: no
-# Default:
-# HostMetadataItem=
-
-### Option: HostInterface
-#	Optional parameter that defines host interface.
-#	Host interface is used at host auto-registration process.
-#	An agent will issue an error and not start if the value is over limit of 255 characters.
-#	If not defined, value will be acquired from HostInterfaceItem.
-#
-# Mandatory: no
-# Range: 0-255 characters
-# Default:
-# HostInterface=
-
-### Option: HostInterfaceItem
-#	Optional parameter that defines an item used for getting host interface.
-#	Host interface is used at host auto-registration process.
-#	During an auto-registration request an agent will log a warning message if
-#	the value returned by specified item is over limit of 255 characters.
-#	This option is only used when HostInterface is not defined.
-#
-# Mandatory: no
-# Default:
-# HostInterfaceItem=
-
-### Option: RefreshActiveChecks
-#	How often list of active checks is refreshed, in seconds.
-#
-# Mandatory: no
-# Range: 1-86400
-# Default:
-# RefreshActiveChecks=5
-
-### Option: BufferSend
-#	Do not keep data longer than N seconds in buffer.
-#
-# Mandatory: no
-# Range: 1-3600
-# Default:
-# BufferSend=5
-
-### Option: BufferSize
-#	Maximum number of values in a memory buffer. The agent will send
-#	all collected data to Zabbix Server or Proxy if the buffer is full.
-#
-# Mandatory: no
-# Range: 2-65535
-# Default:
-# BufferSize=100
-
-### Option: MaxLinesPerSecond
-#	Maximum number of new lines the agent will send per second to Zabbix Server
-#	or Proxy processing 'log' and 'logrt' active checks.
-#	The provided value will be overridden by the parameter 'maxlines',
-#	provided in 'log' or 'logrt' item keys.
-#
-# Mandatory: no
-# Range: 1-1000
-# Default:
-# MaxLinesPerSecond=20
-
-### Option: HeartbeatFrequency
-#	Frequency of heartbeat messages in seconds.
-#	Used for monitoring availability of active checks.
-#	0 - heartbeat messages disabled.
-#
-# Mandatory: no
-# Range: 0-3600
-# Default: 60
-# HeartbeatFrequency=
-
-############ ADVANCED PARAMETERS #################
-
-### Option: Alias
-#	Sets an alias for an item key. It can be used to substitute long and complex item key with a smaller and simpler one.
-#	Multiple Alias parameters may be present. Multiple parameters with the same Alias key are not allowed.
-#	Different Alias keys may reference the same item key.
-#	For example, to retrieve the ID of user 'zabbix':
-#	Alias=zabbix.userid:vfs.file.regexp[/etc/passwd,^zabbix:.:([0-9]+),,,,\1]
-#	Now shorthand key zabbix.userid may be used to retrieve data.
-#	Aliases can be used in HostMetadataItem but not in HostnameItem parameters.
-#
-# Mandatory: no
-# Range:
-# Default:
-
-### Option: Timeout
-#	Spend no more than Timeout seconds on processing
-#
-# Mandatory: no
-# Range: 1-30
-# Default:
-# Timeout=3
-
-### Option: AllowRoot
-#	Allow the agent to run as 'root'. If disabled and the agent is started by 'root', the agent
-#	will try to switch to the user specified by the User configuration option instead.
-#	Has no effect if started under a regular user.
-#	0 - do not allow
-#	1 - allow
-#
-# Mandatory: no
-# Default:
-# AllowRoot=0
-
-### Option: User
-#	Drop privileges to a specific, existing user on the system.
-#	Only has effect if run as 'root' and AllowRoot is disabled.
-#
-# Mandatory: no
-# Default:
-# User=zabbix
-
-### Option: Include
-#	You may include individual files or all files in a directory in the configuration file.
-#	Installing Zabbix will create include directory in /usr/local/etc, unless modified during the compile time.
-#
-# Mandatory: no
-# Default:
-# Include=
-
-# Include=/usr/local/etc/zabbix_agentd.userparams.conf
-# Include=/usr/local/etc/zabbix_agentd.conf.d/
-# Include=/usr/local/etc/zabbix_agentd.conf.d/*.conf
-
-####### USER-DEFINED MONITORED PARAMETERS #######
-
-### Option: UnsafeUserParameters
-#	Allow all characters to be passed in arguments to user-defined parameters.
-#	The following characters are not allowed:
-#	\ ' " ` * ? [ ] { } ~ $ ! & ; ( ) < > | # @
-#	Additionally, newline characters are not allowed.
-#	0 - do not allow
-#	1 - allow
-#
-# Mandatory: no
-# Range: 0-1
-# Default:
-# UnsafeUserParameters=0
-
-### Option: UserParameter
-#	User-defined parameter to monitor. There can be several user-defined parameters.
-#	Format: UserParameter=<key>,<shell command>
-#	See 'zabbix_agentd' directory for examples.
-#
-# Mandatory: no
-# Default:
-# UserParameter=
-
-### Option: UserParameterDir
-#	Directory to execute UserParameter commands from. Only one entry is allowed.
-#	When executing UserParameter commands the agent will change the working directory to the one
-#	specified in the UserParameterDir option.
-#	This way UserParameter commands can be specified using the relative ./ prefix.
-#
-# Mandatory: no
-# Default:
-# UserParameterDir=
-
-####### LOADABLE MODULES #######
-
-### Option: LoadModulePath
-#	Full path to location of agent modules.
-#	Default depends on compilation options.
-#	To see the default path run command "zabbix_agentd --help".
-#
-# Mandatory: no
-# Default:
-# LoadModulePath=${libdir}/modules
-
-### Option: LoadModule
-#	Module to load at agent startup. Modules are used to extend functionality of the agent.
-#	Formats:
-#		LoadModule=<module.so>
-#		LoadModule=<path/module.so>
-#		LoadModule=</abs_path/module.so>
-#	Either the module must be located in directory specified by LoadModulePath or the path must precede the module name.
-#	If the preceding path is absolute (starts with '/') then LoadModulePath is ignored.
-#	It is allowed to include multiple LoadModule parameters.
-#
-# Mandatory: no
-# Default:
-# LoadModule=
-
-####### TLS-RELATED PARAMETERS #######
-
-### Option: TLSConnect
-#	How the agent should connect to server or proxy. Used for active checks.
-#	Only one value can be specified:
-#		unencrypted - connect without encryption
-#		psk         - connect using TLS and a pre-shared key
-#		cert        - connect using TLS and a certificate
-#
-# Mandatory: yes, if TLS certificate or PSK parameters are defined (even for 'unencrypted' connection)
-# Default:
-# TLSConnect=unencrypted
-
-### Option: TLSAccept
-#	What incoming connections to accept.
-#	Multiple values can be specified, separated by comma:
-#		unencrypted - accept connections without encryption
-#		psk         - accept connections secured with TLS and a pre-shared key
-#		cert        - accept connections secured with TLS and a certificate
-#
-# Mandatory: yes, if TLS certificate or PSK parameters are defined (even for 'unencrypted' connection)
-# Default:
-# TLSAccept=unencrypted
-
-### Option: TLSCAFile
-#	Full pathname of a file containing the top-level CA(s) certificates for
-#	peer certificate verification.
-#
-# Mandatory: no
-# Default:
-# TLSCAFile=
-
-### Option: TLSCRLFile
-#	Full pathname of a file containing revoked certificates.
-#
-# Mandatory: no
-# Default:
-# TLSCRLFile=
-
-### Option: TLSServerCertIssuer
-#		Allowed server certificate issuer.
-#
-# Mandatory: no
-# Default:
-# TLSServerCertIssuer=
-
-### Option: TLSServerCertSubject
-#		Allowed server certificate subject.
-#
-# Mandatory: no
-# Default:
-# TLSServerCertSubject=
-
-### Option: TLSCertFile
-#	Full pathname of a file containing the agent certificate or certificate chain.
-#
-# Mandatory: no
-# Default:
-# TLSCertFile=
-
-### Option: TLSKeyFile
-#	Full pathname of a file containing the agent private key.
-#
-# Mandatory: no
-# Default:
-# TLSKeyFile=
-
-### Option: TLSPSKIdentity
-#	Unique, case sensitive string used to identify the pre-shared key.
-#
-# Mandatory: no
-# Default:
-# TLSPSKIdentity=
-
-### Option: TLSPSKFile
-#	Full pathname of a file containing the pre-shared key.
-#
-# Mandatory: no
-# Default:
-# TLSPSKFile=
-
-####### For advanced users - TLS ciphersuite selection criteria #######
-
-### Option: TLSCipherCert13
-#	Cipher string for OpenSSL 1.1.1 or newer in TLS 1.3.
-#	Override the default ciphersuite selection criteria for certificate-based encryption.
-#
-# Mandatory: no
-# Default:
-# TLSCipherCert13=
-
-### Option: TLSCipherCert
-#	GnuTLS priority string or OpenSSL (TLS 1.2) cipher string.
-#	Override the default ciphersuite selection criteria for certificate-based encryption.
-#	Example for GnuTLS:
-#		NONE:+VERS-TLS1.2:+ECDHE-RSA:+RSA:+AES-128-GCM:+AES-128-CBC:+AEAD:+SHA256:+SHA1:+CURVE-ALL:+COMP-NULL:+SIGN-ALL:+CTYPE-X.509
-#	Example for OpenSSL:
-#		EECDH+aRSA+AES128:RSA+aRSA+AES128
-#
-# Mandatory: no
-# Default:
-# TLSCipherCert=
-
-### Option: TLSCipherPSK13
-#	Cipher string for OpenSSL 1.1.1 or newer in TLS 1.3.
-#	Override the default ciphersuite selection criteria for PSK-based encryption.
-#	Example:
-#		TLS_CHACHA20_POLY1305_SHA256:TLS_AES_128_GCM_SHA256
-#
-# Mandatory: no
-# Default:
-# TLSCipherPSK13=
-
-### Option: TLSCipherPSK
-#	GnuTLS priority string or OpenSSL (TLS 1.2) cipher string.
-#	Override the default ciphersuite selection criteria for PSK-based encryption.
-#	Example for GnuTLS:
-#		NONE:+VERS-TLS1.2:+ECDHE-PSK:+PSK:+AES-128-GCM:+AES-128-CBC:+AEAD:+SHA256:+SHA1:+CURVE-ALL:+COMP-NULL:+SIGN-ALL
-#	Example for OpenSSL:
-#		kECDHEPSK+AES128:kPSK+AES128
-#
-# Mandatory: no
-# Default:
-# TLSCipherPSK=
-
-### Option: TLSCipherAll13
-#	Cipher string for OpenSSL 1.1.1 or newer in TLS 1.3.
-#	Override the default ciphersuite selection criteria for certificate- and PSK-based encryption.
-#	Example:
-#		TLS_AES_256_GCM_SHA384:TLS_CHACHA20_POLY1305_SHA256:TLS_AES_128_GCM_SHA256
-#
-# Mandatory: no
-# Default:
-# TLSCipherAll13=
-
-### Option: TLSCipherAll
-#	GnuTLS priority string or OpenSSL (TLS 1.2) cipher string.
-#	Override the default ciphersuite selection criteria for certificate- and PSK-based encryption.
-#	Example for GnuTLS:
-#		NONE:+VERS-TLS1.2:+ECDHE-RSA:+RSA:+ECDHE-PSK:+PSK:+AES-128-GCM:+AES-128-CBC:+AEAD:+SHA256:+SHA1:+CURVE-ALL:+COMP-NULL:+SIGN-ALL:+CTYPE-X.509
-#	Example for OpenSSL:
-#		EECDH+aRSA+AES128:RSA+aRSA+AES128:kECDHEPSK+AES128:kPSK+AES128
-#
-# Mandatory: no
-# Default:
-# TLSCipherAll=
-
-####### For advanced users - TCP-related fine-tuning parameters #######
-
-## Option: ListenBacklog
-#       The maximum number of pending connections in the queue. This parameter is passed to
-#       listen() function as argument 'backlog' (see "man listen").
-#
-# Mandatory: no
-# Range: 0 - INT_MAX (depends on system, too large values may be silently truncated to implementation-specified maximum)
-# Default: SOMAXCONN (hard-coded constant, depends on system)
-# ListenBacklog=