# MikroTik CCR1016-12S-1S by SNMP ## Overview The template for monitoring Ethernet router MikroTik CCR1016-12S-1S+. 1U rackmount, 12xSFP cage, 1xSFP+ cage, 16 cores x 1.2GHz CPU, 2GB RAM, LCD panel, Dual Power supplies, RouterOS L6 ## Requirements Zabbix version: 7.0 and higher. ## Tested versions This template has been tested on: - MikroTik CCR1016-12S-1S+ ## Configuration > Zabbix should be configured according to the instructions in the [Templates out of the box](https://www.zabbix.com/documentation/7.0/manual/config/templates_out_of_the_box) section. ## Setup Refer to the vendor documentation. ### Macros used |Name|Description|Default| |----|-----------|-------| |{$VFS.FS.PUSED.MAX.CRIT}||`90`| |{$VFS.FS.PUSED.MAX.WARN}||`80`| |{$CPU.UTIL.CRIT}||`90`| |{$TEMP_CRIT}||`60`| |{$TEMP_CRIT_LOW}||`5`| |{$TEMP_WARN}||`50`| |{$TEMP_CRIT:"CPU"}||`75`| |{$TEMP_WARN:"CPU"}||`70`| |{$MEMORY.UTIL.MAX}||`90`| |{$IFNAME.WIFI.MATCHES}|

This macro is used in CAPsMAN AP channel discovery. It can be overridden on the host level.

|`WIFI`| |{$IFNAME.LTEMODEM.MATCHES}|

This macro is used in LTE modem discovery. It can be overridden on the host.

|`^lte`| |{$LTEMODEM.RSSI.MIN.WARN}|

The LTE modem RSSI minimum value for warning trigger expression.

|`-100`| |{$LTEMODEM.RSRP.MIN.WARN}|

The LTE modem RSRP minimum value for warning trigger expression.

|`-100`| |{$LTEMODEM.RSRQ.MIN.WARN}|

The LTE modem RSRQ minimum value for warning trigger expression.

|`-20`| |{$LTEMODEM.SINR.MIN.WARN}|

The LTE modem SINR minimum value for warning trigger expression.

|`0`| |{$SNMP.TIMEOUT}||`5m`| |{$ICMP_LOSS_WARN}||`20`| |{$ICMP_RESPONSE_TIME_WARN}||`0.15`| |{$IF.ERRORS.WARN}||`2`| |{$IF.UTIL.MAX}||`90`| |{$IFCONTROL}||`1`| |{$NET.IF.IFNAME.MATCHES}||`^.*$`| |{$NET.IF.IFNAME.NOT_MATCHES}|

Filter out loopbacks, nulls, docker veth links and docker0 bridge by default

|`Macro too long. Please see the template.`| |{$NET.IF.IFOPERSTATUS.MATCHES}||`^.*$`| |{$NET.IF.IFOPERSTATUS.NOT_MATCHES}|

Ignore notPresent(6)

|`^6$`| |{$NET.IF.IFADMINSTATUS.MATCHES}|

Ignore notPresent(6)

|`^.*`| |{$NET.IF.IFADMINSTATUS.NOT_MATCHES}|

Ignore down(2) administrative status

|`^2$`| |{$NET.IF.IFDESCR.MATCHES}||`.*`| |{$NET.IF.IFDESCR.NOT_MATCHES}||`CHANGE_IF_NEEDED`| |{$NET.IF.IFALIAS.MATCHES}||`.*`| |{$NET.IF.IFALIAS.NOT_MATCHES}||`CHANGE_IF_NEEDED`| |{$NET.IF.IFTYPE.MATCHES}||`.*`| |{$NET.IF.IFTYPE.NOT_MATCHES}||`CHANGE_IF_NEEDED`| ### Items |Name|Description|Type|Key and additional info| |----|-----------|----|-----------------------| |Mikrotik: SNMP walk wireless interfaces||SNMP agent|net.if.wireless.walk| |Mikrotik: SNMP walk system CPUs|

MIB: HOST-RESOURCES-MIB

Discovering system CPUs.

|SNMP agent|system.cpu.walk| |Mikrotik: SNMP walk CPU temperature sensors|

MIB: MIKROTIK-MIB

Discovering CPU temperature sensors.

|SNMP agent|sensor.cpu.temp.walk| |Mikrotik: SNMP walk temperature sensors|

MIB: MIKROTIK-MIB

Discovering temperature sensors.

|SNMP agent|sensor.temp.walk| |Mikrotik: SNMP walk mounted filesystems|

MIB: HOST-RESOURCES-MIB

Discovering mounted filesystems.

|SNMP agent|vfs.fs.walk| |Mikrotik: Used memory|

MIB: HOST-RESOURCES-MIB

The amount of the storage represented by this entry that is allocated, in units of hrStorageAllocationUnits.

|SNMP agent|vm.memory.used[hrStorageUsed.Memory]

**Preprocessing**

| |Mikrotik: Total memory|

MIB: HOST-RESOURCES-MIB

The size of the storage represented by this entry, in

units of hrStorageAllocationUnits. This object is

writable to allow remote configuration of the size of

the storage area in those cases where such an

operation makes sense and is possible on the

underlying system. For example, the amount of main

memory allocated to a buffer pool might be modified or

the amount of disk space allocated to virtual memory

might be modified.

|SNMP agent|vm.memory.total[hrStorageSize.Memory]

**Preprocessing**

| |Mikrotik: Memory utilization|

Memory utilization in %.

|Calculated|vm.memory.util[memoryUsedPercentage.Memory]| |Mikrotik: Operating system|

MIB: MIKROTIK-MIB

Software version.

|SNMP agent|system.sw.os[mtxrLicVersion.0]

**Preprocessing**

| |Mikrotik: Hardware model name||SNMP agent|system.hw.model

**Preprocessing**

| |Mikrotik: Hardware serial number|

MIB: MIKROTIK-MIB

RouterBOARD serial number.

|SNMP agent|system.hw.serialnumber

**Preprocessing**

| |Mikrotik: Firmware version|

MIB: MIKROTIK-MIB

Current firmware version.

|SNMP agent|system.hw.firmware

**Preprocessing**

| |Mikrotik: Uptime (network)|

MIB: SNMPv2-MIB

The time (in hundredths of a second) since the network management portion of the system was last re-initialized.

|SNMP agent|system.net.uptime[sysUpTime.0]

**Preprocessing**

| |Mikrotik: Uptime (hardware)|

MIB: HOST-RESOURCES-MIB

The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.

|SNMP agent|system.hw.uptime[hrSystemUptime.0]

**Preprocessing**

| |Mikrotik: SNMP traps (fallback)|

The item is used to collect all SNMP traps unmatched by other snmptrap items

|SNMP trap|snmptrap.fallback| |Mikrotik: System location|

MIB: SNMPv2-MIB

The physical location of this node (e.g., `telephone closet, 3rd floor'). If the location is unknown, the value is the zero-length string.

|SNMP agent|system.location[sysLocation.0]

**Preprocessing**

| |Mikrotik: System contact details|

MIB: SNMPv2-MIB

The textual identification of the contact person for this managed node, together with information on how to contact this person. If no contact information is known, the value is the zero-length string.

|SNMP agent|system.contact[sysContact.0]

**Preprocessing**

| |Mikrotik: System object ID|

MIB: SNMPv2-MIB

The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determining`what kind of box' is being managed. For example, if vendor`Flintstones, Inc.' was assigned the subtree1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1 to its `Fred Router'.

|SNMP agent|system.objectid[sysObjectID.0]

**Preprocessing**

| |Mikrotik: System name|

MIB: SNMPv2-MIB

An administratively-assigned name for this managed node.By convention, this is the node's fully-qualified domain name. If the name is unknown, the value is the zero-length string.

|SNMP agent|system.name

**Preprocessing**

| |Mikrotik: System description|

MIB: SNMPv2-MIB

A textual description of the entity. This value should

include the full name and version identification of the system's hardware type, software operating-system, and

networking software.

|SNMP agent|system.descr[sysDescr.0]

**Preprocessing**

| |Mikrotik: SNMP agent availability|

Availability of SNMP checks on the host. The value of this item corresponds to availability icons in the host list.

Possible value:

0 - not available

1 - available

2 - unknown

|Zabbix internal|zabbix[host,snmp,available]| |Mikrotik: ICMP ping||Simple check|icmpping| |Mikrotik: ICMP loss||Simple check|icmppingloss| |Mikrotik: ICMP response time||Simple check|icmppingsec| |Mikrotik: SNMP walk network interfaces|

Discovering interfaces from IF-MIB.

|SNMP agent|net.if.walk| ### Triggers |Name|Description|Expression|Severity|Dependencies and additional info| |----|-----------|----------|--------|--------------------------------| |Mikrotik: High memory utilization|

The system is running out of free memory.

|`min(/MikroTik CCR1016-12S-1S by SNMP/vm.memory.util[memoryUsedPercentage.Memory],5m)>{$MEMORY.UTIL.MAX}`|Average|| |Mikrotik: Operating system description has changed|

The description of the operating system has changed. Possible reasons are that the system has been updated or replaced. Acknowledge to close the problem manually.

|`last(/MikroTik CCR1016-12S-1S by SNMP/system.sw.os[mtxrLicVersion.0],#1)<>last(/MikroTik CCR1016-12S-1S by SNMP/system.sw.os[mtxrLicVersion.0],#2) and length(last(/MikroTik CCR1016-12S-1S by SNMP/system.sw.os[mtxrLicVersion.0]))>0`|Info|**Manual close**: Yes
**Depends on**:
| |Mikrotik: Device has been replaced|

Device serial number has changed. Acknowledge to close the problem manually.

|`last(/MikroTik CCR1016-12S-1S by SNMP/system.hw.serialnumber,#1)<>last(/MikroTik CCR1016-12S-1S by SNMP/system.hw.serialnumber,#2) and length(last(/MikroTik CCR1016-12S-1S by SNMP/system.hw.serialnumber))>0`|Info|**Manual close**: Yes| |Mikrotik: Firmware has changed|

Firmware version has changed. Acknowledge to close the problem manually.

|`last(/MikroTik CCR1016-12S-1S by SNMP/system.hw.firmware,#1)<>last(/MikroTik CCR1016-12S-1S by SNMP/system.hw.firmware,#2) and length(last(/MikroTik CCR1016-12S-1S by SNMP/system.hw.firmware))>0`|Info|**Manual close**: Yes| |Mikrotik: Host has been restarted|

Uptime is less than 10 minutes.

|`(last(/MikroTik CCR1016-12S-1S by SNMP/system.hw.uptime[hrSystemUptime.0])>0 and last(/MikroTik CCR1016-12S-1S by SNMP/system.hw.uptime[hrSystemUptime.0])<10m) or (last(/MikroTik CCR1016-12S-1S by SNMP/system.hw.uptime[hrSystemUptime.0])=0 and last(/MikroTik CCR1016-12S-1S by SNMP/system.net.uptime[sysUpTime.0])<10m)`|Warning|**Manual close**: Yes
**Depends on**:
| |Mikrotik: System name has changed|

The name of the system has changed. Acknowledge to close the problem manually.

|`last(/MikroTik CCR1016-12S-1S by SNMP/system.name,#1)<>last(/MikroTik CCR1016-12S-1S by SNMP/system.name,#2) and length(last(/MikroTik CCR1016-12S-1S by SNMP/system.name))>0`|Info|**Manual close**: Yes| |Mikrotik: No SNMP data collection|

SNMP is not available for polling. Please check device connectivity and SNMP settings.

|`max(/MikroTik CCR1016-12S-1S by SNMP/zabbix[host,snmp,available],{$SNMP.TIMEOUT})=0`|Warning|**Depends on**:
| |Mikrotik: Unavailable by ICMP ping|

Last three attempts returned timeout. Please check device connectivity.

|`max(/MikroTik CCR1016-12S-1S by SNMP/icmpping,#3)=0`|High|| |Mikrotik: High ICMP ping loss||`min(/MikroTik CCR1016-12S-1S by SNMP/icmppingloss,5m)>{$ICMP_LOSS_WARN} and min(/MikroTik CCR1016-12S-1S by SNMP/icmppingloss,5m)<100`|Warning|**Depends on**:
| |Mikrotik: High ICMP ping response time||`avg(/MikroTik CCR1016-12S-1S by SNMP/icmppingsec,5m)>{$ICMP_RESPONSE_TIME_WARN}`|Warning|**Depends on**:
| ### LLD rule CPU discovery |Name|Description|Type|Key and additional info| |----|-----------|----|-----------------------| |CPU discovery|

HOST-RESOURCES-MIB::hrProcessorTable discovery.

|Dependent item|hrProcessorLoad.discovery

**Preprocessing**

| ### Item prototypes for CPU discovery |Name|Description|Type|Key and additional info| |----|-----------|----|-----------------------| |#{#SNMPINDEX}: CPU utilization|

MIB: HOST-RESOURCES-MIB

The average, over the last minute, of the percentage of time that this processor was not idle. Implementations may approximate this one minute smoothing period if necessary.

|Dependent item|system.cpu.util[hrProcessorLoad.{#SNMPINDEX}]

**Preprocessing**

| ### Trigger prototypes for CPU discovery |Name|Description|Expression|Severity|Dependencies and additional info| |----|-----------|----------|--------|--------------------------------| |#{#SNMPINDEX}: High CPU utilization|

CPU utilization is too high. The system might be slow to respond.

|`min(/MikroTik CCR1016-12S-1S by SNMP/system.cpu.util[hrProcessorLoad.{#SNMPINDEX}],5m)>{$CPU.UTIL.CRIT}`|Warning|| ### LLD rule Temperature CPU discovery |Name|Description|Type|Key and additional info| |----|-----------|----|-----------------------| |Temperature CPU discovery|

MIKROTIK-MIB::mtxrHlProcessorTemperature

Since temperature of CPU is not available on all Mikrotik hardware, this is done to avoid unsupported items.

|Dependent item|mtxrHlProcessorTemperature.discovery

**Preprocessing**

| ### Item prototypes for Temperature CPU discovery |Name|Description|Type|Key and additional info| |----|-----------|----|-----------------------| |CPU: Temperature|

MIB: MIKROTIK-MIB

mtxrHlProcessorTemperature Processor temperature in Celsius (degrees C).

Might be missing in entry models (RB750, RB450G..).

|Dependent item|sensor.temp.value[mtxrHlProcessorTemperature.{#SNMPINDEX}]

**Preprocessing**

| ### Trigger prototypes for Temperature CPU discovery |Name|Description|Expression|Severity|Dependencies and additional info| |----|-----------|----------|--------|--------------------------------| |CPU: Temperature is above warning threshold|

This trigger uses temperature sensor values as well as temperature sensor status if available.

|`avg(/MikroTik CCR1016-12S-1S by SNMP/sensor.temp.value[mtxrHlProcessorTemperature.{#SNMPINDEX}],5m)>{$TEMP_WARN:"CPU"}`|Warning|**Depends on**:
| |CPU: Temperature is above critical threshold|

This trigger uses temperature sensor values as well as temperature sensor status if available.

|`avg(/MikroTik CCR1016-12S-1S by SNMP/sensor.temp.value[mtxrHlProcessorTemperature.{#SNMPINDEX}],5m)>{$TEMP_CRIT:"CPU"}`|High|| |CPU: Temperature is too low||`avg(/MikroTik CCR1016-12S-1S by SNMP/sensor.temp.value[mtxrHlProcessorTemperature.{#SNMPINDEX}],5m)<{$TEMP_CRIT_LOW:"CPU"}`|Average|| ### LLD rule Temperature sensor discovery |Name|Description|Type|Key and additional info| |----|-----------|----|-----------------------| |Temperature sensor discovery|

MIKROTIK-MIB::mtxrHlTemperature

Since temperature sensor is not available on all Mikrotik hardware, this is done to avoid unsupported items.

|Dependent item|mtxrHlTemperature.discovery

**Preprocessing**

| ### Item prototypes for Temperature sensor discovery |Name|Description|Type|Key and additional info| |----|-----------|----|-----------------------| |Device: Temperature|

MIB: MIKROTIK-MIB

mtxrHlTemperature Device temperature in Celsius (degrees C).

Might be missing in entry models (RB750, RB450G..).

Reference: http://wiki.mikrotik.com/wiki/Manual:SNMP

|Dependent item|sensor.temp.value[mtxrHlTemperature.{#SNMPINDEX}]

**Preprocessing**

| ### Trigger prototypes for Temperature sensor discovery |Name|Description|Expression|Severity|Dependencies and additional info| |----|-----------|----------|--------|--------------------------------| |Device: Temperature is above warning threshold|

This trigger uses temperature sensor values as well as temperature sensor status if available.

|`avg(/MikroTik CCR1016-12S-1S by SNMP/sensor.temp.value[mtxrHlTemperature.{#SNMPINDEX}],5m)>{$TEMP_WARN:"Device"}`|Warning|**Depends on**:
| |Device: Temperature is above critical threshold|

This trigger uses temperature sensor values as well as temperature sensor status if available.

|`avg(/MikroTik CCR1016-12S-1S by SNMP/sensor.temp.value[mtxrHlTemperature.{#SNMPINDEX}],5m)>{$TEMP_CRIT:"Device"}`|High|| |Device: Temperature is too low||`avg(/MikroTik CCR1016-12S-1S by SNMP/sensor.temp.value[mtxrHlTemperature.{#SNMPINDEX}],5m)<{$TEMP_CRIT_LOW:"Device"}`|Average|| ### LLD rule LTE modem discovery |Name|Description|Type|Key and additional info| |----|-----------|----|-----------------------| |LTE modem discovery|

MIKROTIK-MIB::mtxrLTEModemInterfaceIndex.

|Dependent item|mtxrLTEModem.discovery

**Preprocessing**

| ### Item prototypes for LTE modem discovery |Name|Description|Type|Key and additional info| |----|-----------|----|-----------------------| |Interface {#IFNAME}({#IFALIAS}): LTE modem RSSI|

MIB: MIKROTIK-MIB

mtxrLTEModemSignalRSSI Received Signal Strength Indicator.

|Dependent item|lte.modem.rssi[mtxrLTEModemSignalRSSI.{#SNMPINDEX}]

**Preprocessing**

| |Interface {#IFNAME}({#IFALIAS}): LTE modem RSRP|

MIB: MIKROTIK-MIB

mtxrLTEModemSignalRSRP Reference Signal Received Power.

|Dependent item|lte.modem.rsrp[mtxrLTEModemSignalRSRP.{#SNMPINDEX}]

**Preprocessing**

| |Interface {#IFNAME}({#IFALIAS}): LTE modem RSRQ|

MIB: MIKROTIK-MIB

mtxrLTEModemSignalRSRQ Reference Signal Received Quality.

|Dependent item|lte.modem.rsrq[mtxrLTEModemSignalRSRQ.{#SNMPINDEX}]

**Preprocessing**

| |Interface {#IFNAME}({#IFALIAS}): LTE modem SINR|

MIB: MIKROTIK-MIB

mtxrLTEModemSignalSINR Signal to Interference & Noise Ratio.

|Dependent item|lte.modem.sinr[mtxrLTEModemSignalSINR.{#SNMPINDEX}]

**Preprocessing**

| ### Trigger prototypes for LTE modem discovery |Name|Description|Expression|Severity|Dependencies and additional info| |----|-----------|----------|--------|--------------------------------| |Interface {#IFNAME}({#IFALIAS}): LTE modem RSSI is low||`max(/MikroTik CCR1016-12S-1S by SNMP/lte.modem.rssi[mtxrLTEModemSignalRSSI.{#SNMPINDEX}],5m) < {$LTEMODEM.RSSI.MIN.WARN}`|Warning|| |Interface {#IFNAME}({#IFALIAS}): LTE modem RSRP is low||`max(/MikroTik CCR1016-12S-1S by SNMP/lte.modem.rsrp[mtxrLTEModemSignalRSRP.{#SNMPINDEX}],5m) < {$LTEMODEM.RSRP.MIN.WARN}`|Warning|| |Interface {#IFNAME}({#IFALIAS}): LTE modem RSRQ is low||`max(/MikroTik CCR1016-12S-1S by SNMP/lte.modem.rsrq[mtxrLTEModemSignalRSRQ.{#SNMPINDEX}],5m) < {$LTEMODEM.RSRQ.MIN.WARN}`|Warning|| |Interface {#IFNAME}({#IFALIAS}): LTE modem SINR is low||`max(/MikroTik CCR1016-12S-1S by SNMP/lte.modem.sinr[mtxrLTEModemSignalSINR.{#SNMPINDEX}],5m) < {$LTEMODEM.SINR.MIN.WARN}`|Warning|| ### LLD rule AP channel discovery |Name|Description|Type|Key and additional info| |----|-----------|----|-----------------------| |AP channel discovery|

MIKROTIK-MIB::mtxrWlAp.

|Dependent item|mtxrWlAp.discovery

**Preprocessing**

| ### Item prototypes for AP channel discovery |Name|Description|Type|Key and additional info| |----|-----------|----|-----------------------| |Interface {#IFNAME}({#IFALIAS}): SSID|

MIB: MIKROTIK-MIB

mtxrWlApSsid Service Set Identifier.

|Dependent item|ssid.name[mtxrWlApSsid.{#SNMPINDEX}]

**Preprocessing**

| |Interface {#IFNAME}({#IFALIAS}): AP band|

MIB: MIKROTIK-MIB

mtxrWlApBand

|Dependent item|ssid.band[mtxrWlApBand.{#SNMPINDEX}]

**Preprocessing**

| |Interface {#IFNAME}({#IFALIAS}): AP noise floor|

MIB: MIKROTIK-MIB

mtxrWlApNoiseFloor

|Dependent item|ssid.noise[mtxrWlApNoiseFloor.{#SNMPINDEX}]

**Preprocessing**

| |Interface {#IFNAME}({#IFALIAS}): AP registered clients|

MIB: MIKROTIK-MIB

mtxrWlApClientCount Client established connection to AP, but didn't finish all authentication procedures for full connection.

|Dependent item|ssid.regclient[mtxrWlApClientCount.{#SNMPINDEX}]

**Preprocessing**

| |Interface {#IFNAME}({#IFALIAS}): AP authenticated clients|

MIB: MIKROTIK-MIB

mtxrWlApAuthClientCount Number of authentication clients.

|Dependent item|ssid.authclient[mtxrWlApAuthClientCount.{#SNMPINDEX}]

**Preprocessing**

| ### LLD rule CAPsMAN AP channel discovery |Name|Description|Type|Key and additional info| |----|-----------|----|-----------------------| |CAPsMAN AP channel discovery|

MIKROTIK-MIB::mtxrWlCMChannel.

|Dependent item|mtxrWlCMChannel.discovery

**Preprocessing**

| ### Item prototypes for CAPsMAN AP channel discovery |Name|Description|Type|Key and additional info| |----|-----------|----|-----------------------| |Interface {#IFNAME}({#IFALIAS}): AP channel|

MIB: MIKROTIK-MIB

mtxrWlCMChannel

|Dependent item|ssid.channel[mtxrWlCMChannel.{#SNMPINDEX}]

**Preprocessing**

| |Interface {#IFNAME}({#IFALIAS}): AP state|

MIB: MIKROTIK-MIB

mtxrWlCMState Wireless interface state.

|Dependent item|ssid.state[mtxrWlCMState.{#SNMPINDEX}]

**Preprocessing**

| |Interface {#IFNAME}({#IFALIAS}): AP registered clients|

MIB: MIKROTIK-MIB

mtxrWlCMRegClientCount Client established connection to AP, but didn't finish all authentication procedures for full connection.

|Dependent item|ssid.regclient[mtxrWlCMRegClientCount.{#SNMPINDEX}]

**Preprocessing**

| |Interface {#IFNAME}({#IFALIAS}): AP authenticated clients|

MIB: MIKROTIK-MIB

mtxrWlCMAuthClientCount Number of authentication clients.

|Dependent item|ssid.authclient[mtxrWlCMAuthClientCount.{#SNMPINDEX}]

**Preprocessing**

| ### Trigger prototypes for CAPsMAN AP channel discovery |Name|Description|Expression|Severity|Dependencies and additional info| |----|-----------|----------|--------|--------------------------------| |Interface {#IFNAME}({#IFALIAS}): AP interface {#IFNAME}({#IFALIAS}) is not running|

Access point interface can be not running by different reasons - disabled interface, power off, network link down.

|`last(/MikroTik CCR1016-12S-1S by SNMP/ssid.state[mtxrWlCMState.{#SNMPINDEX}])<>"running-ap"`|Warning|| ### LLD rule Storage discovery |Name|Description|Type|Key and additional info| |----|-----------|----|-----------------------| |Storage discovery|

HOST-RESOURCES-MIB::hrStorage discovery with storage filter.

|Dependent item|storage.discovery

**Preprocessing**

| ### Item prototypes for Storage discovery |Name|Description|Type|Key and additional info| |----|-----------|----|-----------------------| |Disk-{#SNMPINDEX}: Used space|

MIB: HOST-RESOURCES-MIB

The amount of the storage represented by this entry that is allocated, in units of hrStorageAllocationUnits.

|Dependent item|vfs.fs.used[hrStorageSize.{#SNMPINDEX}]

**Preprocessing**

| |Disk-{#SNMPINDEX}: Total space|

MIB: HOST-RESOURCES-MIB

The size of the storage represented by this entry, in

units of hrStorageAllocationUnits. This object is

writable to allow remote configuration of the size of

the storage area in those cases where such an

operation makes sense and is possible on the

underlying system. For example, the amount of main

memory allocated to a buffer pool might be modified or

the amount of disk space allocated to virtual memory

might be modified.

|Dependent item|vfs.fs.total[hrStorageSize.{#SNMPINDEX}]

**Preprocessing**

| |Disk-{#SNMPINDEX}: Space utilization|

The space utilization expressed in % for Disk-{#SNMPINDEX}.

|Calculated|vfs.fs.pused[hrStorageSize.{#SNMPINDEX}]| ### Trigger prototypes for Storage discovery |Name|Description|Expression|Severity|Dependencies and additional info| |----|-----------|----------|--------|--------------------------------| |Disk-{#SNMPINDEX}: Disk space is critically low|

Two conditions should match: First, space utilization should be above {$VFS.FS.PUSED.MAX.CRIT:"Disk-{#SNMPINDEX}"}.
Second condition should be one of the following:
- The disk free space is less than {$VFS.FS.FREE.MIN.CRIT:"Disk-{#SNMPINDEX}"}.
- The disk will be full in less than 24 hours.

|`last(/MikroTik CCR1016-12S-1S by SNMP/vfs.fs.pused[hrStorageSize.{#SNMPINDEX}])>{$VFS.FS.PUSED.MAX.CRIT:"Disk-{#SNMPINDEX}"} and ((last(/MikroTik CCR1016-12S-1S by SNMP/vfs.fs.total[hrStorageSize.{#SNMPINDEX}])-last(/MikroTik CCR1016-12S-1S by SNMP/vfs.fs.used[hrStorageSize.{#SNMPINDEX}]))<{$VFS.FS.FREE.MIN.CRIT:"Disk-{#SNMPINDEX}"} or timeleft(/MikroTik CCR1016-12S-1S by SNMP/vfs.fs.pused[hrStorageSize.{#SNMPINDEX}],1h,100)<1d)`|Average|**Manual close**: Yes| |Disk-{#SNMPINDEX}: Disk space is low|

Two conditions should match: First, space utilization should be above {$VFS.FS.PUSED.MAX.WARN:"Disk-{#SNMPINDEX}"}.
Second condition should be one of the following:
- The disk free space is less than {$VFS.FS.FREE.MIN.WARN:"Disk-{#SNMPINDEX}"}.
- The disk will be full in less than 24 hours.

|`last(/MikroTik CCR1016-12S-1S by SNMP/vfs.fs.pused[hrStorageSize.{#SNMPINDEX}])>{$VFS.FS.PUSED.MAX.WARN:"Disk-{#SNMPINDEX}"} and ((last(/MikroTik CCR1016-12S-1S by SNMP/vfs.fs.total[hrStorageSize.{#SNMPINDEX}])-last(/MikroTik CCR1016-12S-1S by SNMP/vfs.fs.used[hrStorageSize.{#SNMPINDEX}]))<{$VFS.FS.FREE.MIN.WARN:"Disk-{#SNMPINDEX}"} or timeleft(/MikroTik CCR1016-12S-1S by SNMP/vfs.fs.pused[hrStorageSize.{#SNMPINDEX}],1h,100)<1d)`|Warning|**Manual close**: Yes
**Depends on**:
| ### LLD rule Network interfaces discovery |Name|Description|Type|Key and additional info| |----|-----------|----|-----------------------| |Network interfaces discovery|

Discovering interfaces from IF-MIB.

|Dependent item|net.if.discovery

**Preprocessing**

| ### Item prototypes for Network interfaces discovery |Name|Description|Type|Key and additional info| |----|-----------|----|-----------------------| |Interface {#IFNAME}({#IFALIAS}): Operational status|

MIB: IF-MIB

The current operational state of the interface.

- The testing(3) state indicates that no operational packet scan be passed

- If ifAdminStatus is down(2) then ifOperStatus should be down(2)

- If ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic

- It should change todormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection)

- It should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state

- It should remain in the notPresent(6) state if the interface has missing(typically, hardware) components.

|Dependent item|net.if.status[ifOperStatus.{#SNMPINDEX}]

**Preprocessing**

| |Interface {#IFNAME}({#IFALIAS}): Bits received|

MIB: IF-MIB

The total number of octets received on the interface, including framing characters. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

|Dependent item|net.if.in[ifHCInOctets.{#SNMPINDEX}]

**Preprocessing**

| |Interface {#IFNAME}({#IFALIAS}): Bits sent|

MIB: IF-MIB

The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets.Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

|Dependent item|net.if.out[ifHCOutOctets.{#SNMPINDEX}]

**Preprocessing**

| |Interface {#IFNAME}({#IFALIAS}): Inbound packets with errors|

MIB: IF-MIB

For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

|Dependent item|net.if.in.errors[ifInErrors.{#SNMPINDEX}]

**Preprocessing**

| |Interface {#IFNAME}({#IFALIAS}): Outbound packets with errors|

MIB: IF-MIB

For packet-oriented interfaces, the number of outbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of outbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

|Dependent item|net.if.out.errors[ifOutErrors.{#SNMPINDEX}]

**Preprocessing**

| |Interface {#IFNAME}({#IFALIAS}): Outbound packets discarded|

MIB: IF-MIB

The number of outbound packets which were chosen to be discarded

even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.

One possible reason for discarding such a packet could be to free up buffer space.

Discontinuities in the value of this counter can occur at re-initialization of the management system,

and at other times as indicated by the value of ifCounterDiscontinuityTime.

|Dependent item|net.if.out.discards[ifOutDiscards.{#SNMPINDEX}]

**Preprocessing**

| |Interface {#IFNAME}({#IFALIAS}): Inbound packets discarded|

MIB: IF-MIB

The number of inbound packets which were chosen to be discarded

even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.

One possible reason for discarding such a packet could be to free up buffer space.

Discontinuities in the value of this counter can occur at re-initialization of the management system,

and at other times as indicated by the value of ifCounterDiscontinuityTime.

|Dependent item|net.if.in.discards[ifInDiscards.{#SNMPINDEX}]

**Preprocessing**

| |Interface {#IFNAME}({#IFALIAS}): Interface type|

MIB: IF-MIB

The type of interface.

Additional values for ifType are assigned by the Internet Assigned Numbers Authority (IANA),

through updating the syntax of the IANAifType textual convention.

|Dependent item|net.if.type[ifType.{#SNMPINDEX}]

**Preprocessing**

| |Interface {#IFNAME}({#IFALIAS}): Speed|

MIB: IF-MIB

An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of `n' then the speed of the interface is somewhere in the range of `n-500,000' to`n+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero.

|Dependent item|net.if.speed[ifHighSpeed.{#SNMPINDEX}]

**Preprocessing**

| ### Trigger prototypes for Network interfaces discovery |Name|Description|Expression|Severity|Dependencies and additional info| |----|-----------|----------|--------|--------------------------------| |Interface {#IFNAME}({#IFALIAS}): Link down|

This trigger expression works as follows:
1. It can be triggered if the operations status is down.
2. `{$IFCONTROL:"{#IFNAME}"}=1` - a user can redefine context macro to value - 0. That marks this interface as not important. No new trigger will be fired if this interface is down.
3. `{TEMPLATE_NAME:METRIC.diff()}=1` - the trigger fires only if the operational status was up to (1) sometime before (so, do not fire for the 'eternal off' interfaces.)

WARNING: if closed manually - it will not fire again on the next poll, because of .diff.

|`{$IFCONTROL:"{#IFNAME}"}=1 and last(/MikroTik CCR1016-12S-1S by SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])=2 and (last(/MikroTik CCR1016-12S-1S by SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}],#1)<>last(/MikroTik CCR1016-12S-1S by SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}],#2))`|Average|**Manual close**: Yes| |Interface {#IFNAME}({#IFALIAS}): High bandwidth usage|

The utilization of the network interface is close to its estimated maximum bandwidth.

|`(avg(/MikroTik CCR1016-12S-1S by SNMP/net.if.in[ifHCInOctets.{#SNMPINDEX}],15m)>({$IF.UTIL.MAX:"{#IFNAME}"}/100)*last(/MikroTik CCR1016-12S-1S by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}]) or avg(/MikroTik CCR1016-12S-1S by SNMP/net.if.out[ifHCOutOctets.{#SNMPINDEX}],15m)>({$IF.UTIL.MAX:"{#IFNAME}"}/100)*last(/MikroTik CCR1016-12S-1S by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])) and last(/MikroTik CCR1016-12S-1S by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])>0`|Warning|**Manual close**: Yes
**Depends on**:
| |Interface {#IFNAME}({#IFALIAS}): High error rate|

It recovers when it is below 80% of the `{$IF.ERRORS.WARN:"{#IFNAME}"}` threshold.

|`min(/MikroTik CCR1016-12S-1S by SNMP/net.if.in.errors[ifInErrors.{#SNMPINDEX}],5m)>{$IF.ERRORS.WARN:"{#IFNAME}"} or min(/MikroTik CCR1016-12S-1S by SNMP/net.if.out.errors[ifOutErrors.{#SNMPINDEX}],5m)>{$IF.ERRORS.WARN:"{#IFNAME}"}`|Warning|**Manual close**: Yes
**Depends on**:
| |Interface {#IFNAME}({#IFALIAS}): Ethernet has changed to lower speed than it was before|

This Ethernet connection has transitioned down from its known maximum speed. This might be a sign of autonegotiation issues. Acknowledge to close the problem manually.

|`change(/MikroTik CCR1016-12S-1S by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])<0 and last(/MikroTik CCR1016-12S-1S by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])>0 and ( last(/MikroTik CCR1016-12S-1S by SNMP/net.if.type[ifType.{#SNMPINDEX}])=6 or last(/MikroTik CCR1016-12S-1S by SNMP/net.if.type[ifType.{#SNMPINDEX}])=7 or last(/MikroTik CCR1016-12S-1S by SNMP/net.if.type[ifType.{#SNMPINDEX}])=11 or last(/MikroTik CCR1016-12S-1S by SNMP/net.if.type[ifType.{#SNMPINDEX}])=62 or last(/MikroTik CCR1016-12S-1S by SNMP/net.if.type[ifType.{#SNMPINDEX}])=69 or last(/MikroTik CCR1016-12S-1S by SNMP/net.if.type[ifType.{#SNMPINDEX}])=117 ) and (last(/MikroTik CCR1016-12S-1S by SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])<>2)`|Info|**Manual close**: Yes
**Depends on**:
| ## Feedback Please report any issues with the template at [`https://support.zabbix.com`](https://support.zabbix.com) You can also provide feedback, discuss the template, or ask for help at [`ZABBIX forums`](https://www.zabbix.com/forum/zabbix-suggestions-and-feedback)