# MikroTik FiberBox by SNMP ## Overview The template for monitoring Switch MikroTik FiberBox. An outdoor switch with five SFP ports ## Requirements Zabbix version: 7.0 and higher. ## Tested versions This template has been tested on: - MikroTik FiberBox ## Configuration > Zabbix should be configured according to the instructions in the [Templates out of the box](https://www.zabbix.com/documentation/7.0/manual/config/templates_out_of_the_box) section. ## Setup Refer to the vendor documentation. ### Macros used |Name|Description|Default| |----|-----------|-------| |{$VFS.FS.PUSED.MAX.CRIT}||`90`| |{$VFS.FS.PUSED.MAX.WARN}||`80`| |{$CPU.UTIL.CRIT}||`90`| |{$TEMP_CRIT}||`60`| |{$TEMP_CRIT_LOW}||`5`| |{$TEMP_WARN}||`50`| |{$TEMP_CRIT:"CPU"}||`75`| |{$TEMP_WARN:"CPU"}||`70`| |{$MEMORY.UTIL.MAX}||`90`| |{$IFNAME.WIFI.MATCHES}|
This macro is used in CAPsMAN AP channel discovery. It can be overridden on the host level.
|`WIFI`| |{$IFNAME.LTEMODEM.MATCHES}|This macro is used in LTE modem discovery. It can be overridden on the host.
|`^lte`| |{$LTEMODEM.RSSI.MIN.WARN}|The LTE modem RSSI minimum value for warning trigger expression.
|`-100`| |{$LTEMODEM.RSRP.MIN.WARN}|The LTE modem RSRP minimum value for warning trigger expression.
|`-100`| |{$LTEMODEM.RSRQ.MIN.WARN}|The LTE modem RSRQ minimum value for warning trigger expression.
|`-20`| |{$LTEMODEM.SINR.MIN.WARN}|The LTE modem SINR minimum value for warning trigger expression.
|`0`| |{$SNMP.TIMEOUT}||`5m`| |{$ICMP_LOSS_WARN}||`20`| |{$ICMP_RESPONSE_TIME_WARN}||`0.15`| |{$IF.ERRORS.WARN}||`2`| |{$IF.UTIL.MAX}||`90`| |{$IFCONTROL}||`1`| |{$NET.IF.IFNAME.MATCHES}||`^.*$`| |{$NET.IF.IFNAME.NOT_MATCHES}|Filter out loopbacks, nulls, docker veth links and docker0 bridge by default
|`Macro too long. Please see the template.`| |{$NET.IF.IFOPERSTATUS.MATCHES}||`^.*$`| |{$NET.IF.IFOPERSTATUS.NOT_MATCHES}|Ignore notPresent(6)
|`^6$`| |{$NET.IF.IFADMINSTATUS.MATCHES}|Ignore notPresent(6)
|`^.*`| |{$NET.IF.IFADMINSTATUS.NOT_MATCHES}|Ignore down(2) administrative status
|`^2$`| |{$NET.IF.IFDESCR.MATCHES}||`.*`| |{$NET.IF.IFDESCR.NOT_MATCHES}||`CHANGE_IF_NEEDED`| |{$NET.IF.IFALIAS.MATCHES}||`.*`| |{$NET.IF.IFALIAS.NOT_MATCHES}||`CHANGE_IF_NEEDED`| |{$NET.IF.IFTYPE.MATCHES}||`.*`| |{$NET.IF.IFTYPE.NOT_MATCHES}||`CHANGE_IF_NEEDED`| ### Items |Name|Description|Type|Key and additional info| |----|-----------|----|-----------------------| |Mikrotik: SNMP walk wireless interfaces||SNMP agent|net.if.wireless.walk| |Mikrotik: SNMP walk system CPUs|MIB: HOST-RESOURCES-MIB
Discovering system CPUs.
|SNMP agent|system.cpu.walk| |Mikrotik: SNMP walk CPU temperature sensors|MIB: MIKROTIK-MIB
Discovering CPU temperature sensors.
|SNMP agent|sensor.cpu.temp.walk| |Mikrotik: SNMP walk temperature sensors|MIB: MIKROTIK-MIB
Discovering temperature sensors.
|SNMP agent|sensor.temp.walk| |Mikrotik: SNMP walk mounted filesystems|MIB: HOST-RESOURCES-MIB
Discovering mounted filesystems.
|SNMP agent|vfs.fs.walk| |Mikrotik: Used memory|MIB: HOST-RESOURCES-MIB
The amount of the storage represented by this entry that is allocated, in units of hrStorageAllocationUnits.
|SNMP agent|vm.memory.used[hrStorageUsed.Memory]**Preprocessing**
Custom multiplier: `1024`
MIB: HOST-RESOURCES-MIB
The size of the storage represented by this entry, in
units of hrStorageAllocationUnits. This object is
writable to allow remote configuration of the size of
the storage area in those cases where such an
operation makes sense and is possible on the
underlying system. For example, the amount of main
memory allocated to a buffer pool might be modified or
the amount of disk space allocated to virtual memory
might be modified.
|SNMP agent|vm.memory.total[hrStorageSize.Memory]**Preprocessing**
Custom multiplier: `1024`
Memory utilization in %.
|Calculated|vm.memory.util[memoryUsedPercentage.Memory]| |Mikrotik: Operating system|MIB: MIKROTIK-MIB
Software version.
|SNMP agent|system.sw.os[mtxrLicVersion.0]**Preprocessing**
Discard unchanged with heartbeat: `1d`
**Preprocessing**
Discard unchanged with heartbeat: `1d`
MIB: MIKROTIK-MIB
RouterBOARD serial number.
|SNMP agent|system.hw.serialnumber**Preprocessing**
Discard unchanged with heartbeat: `1d`
MIB: MIKROTIK-MIB
Current firmware version.
|SNMP agent|system.hw.firmware**Preprocessing**
Discard unchanged with heartbeat: `1d`
MIB: SNMPv2-MIB
The time (in hundredths of a second) since the network management portion of the system was last re-initialized.
|SNMP agent|system.net.uptime[sysUpTime.0]**Preprocessing**
Custom multiplier: `0.01`
MIB: HOST-RESOURCES-MIB
The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.
|SNMP agent|system.hw.uptime[hrSystemUptime.0]**Preprocessing**
Check for not supported value
⛔️Custom on fail: Set value to: `0`
Custom multiplier: `0.01`
The item is used to collect all SNMP traps unmatched by other snmptrap items
|SNMP trap|snmptrap.fallback| |Mikrotik: System location|MIB: SNMPv2-MIB
The physical location of this node (e.g., `telephone closet, 3rd floor'). If the location is unknown, the value is the zero-length string.
|SNMP agent|system.location[sysLocation.0]**Preprocessing**
Discard unchanged with heartbeat: `12h`
MIB: SNMPv2-MIB
The textual identification of the contact person for this managed node, together with information on how to contact this person. If no contact information is known, the value is the zero-length string.
|SNMP agent|system.contact[sysContact.0]**Preprocessing**
Discard unchanged with heartbeat: `12h`
MIB: SNMPv2-MIB
The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determining`what kind of box' is being managed. For example, if vendor`Flintstones, Inc.' was assigned the subtree1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1 to its `Fred Router'.
|SNMP agent|system.objectid[sysObjectID.0]**Preprocessing**
Discard unchanged with heartbeat: `12h`
MIB: SNMPv2-MIB
An administratively-assigned name for this managed node.By convention, this is the node's fully-qualified domain name. If the name is unknown, the value is the zero-length string.
|SNMP agent|system.name**Preprocessing**
Discard unchanged with heartbeat: `12h`
MIB: SNMPv2-MIB
A textual description of the entity. This value should
include the full name and version identification of the system's hardware type, software operating-system, and
networking software.
|SNMP agent|system.descr[sysDescr.0]**Preprocessing**
Discard unchanged with heartbeat: `12h`
Availability of SNMP checks on the host. The value of this item corresponds to availability icons in the host list.
Possible value:
0 - not available
1 - available
2 - unknown
|Zabbix internal|zabbix[host,snmp,available]| |Mikrotik: ICMP ping||Simple check|icmpping| |Mikrotik: ICMP loss||Simple check|icmppingloss| |Mikrotik: ICMP response time||Simple check|icmppingsec| |Mikrotik: SNMP walk network interfaces|Discovering interfaces from IF-MIB.
|SNMP agent|net.if.walk| ### Triggers |Name|Description|Expression|Severity|Dependencies and additional info| |----|-----------|----------|--------|--------------------------------| |Mikrotik: High memory utilization|The system is running out of free memory.
|`min(/MikroTik FiberBox by SNMP/vm.memory.util[memoryUsedPercentage.Memory],5m)>{$MEMORY.UTIL.MAX}`|Average|| |Mikrotik: Operating system description has changed|The description of the operating system has changed. Possible reasons are that the system has been updated or replaced. Acknowledge to close the problem manually.
|`last(/MikroTik FiberBox by SNMP/system.sw.os[mtxrLicVersion.0],#1)<>last(/MikroTik FiberBox by SNMP/system.sw.os[mtxrLicVersion.0],#2) and length(last(/MikroTik FiberBox by SNMP/system.sw.os[mtxrLicVersion.0]))>0`|Info|**Manual close**: YesDevice serial number has changed. Acknowledge to close the problem manually.
|`last(/MikroTik FiberBox by SNMP/system.hw.serialnumber,#1)<>last(/MikroTik FiberBox by SNMP/system.hw.serialnumber,#2) and length(last(/MikroTik FiberBox by SNMP/system.hw.serialnumber))>0`|Info|**Manual close**: Yes| |Mikrotik: Firmware has changed|Firmware version has changed. Acknowledge to close the problem manually.
|`last(/MikroTik FiberBox by SNMP/system.hw.firmware,#1)<>last(/MikroTik FiberBox by SNMP/system.hw.firmware,#2) and length(last(/MikroTik FiberBox by SNMP/system.hw.firmware))>0`|Info|**Manual close**: Yes| |Mikrotik: Host has been restarted|Uptime is less than 10 minutes.
|`(last(/MikroTik FiberBox by SNMP/system.hw.uptime[hrSystemUptime.0])>0 and last(/MikroTik FiberBox by SNMP/system.hw.uptime[hrSystemUptime.0])<10m) or (last(/MikroTik FiberBox by SNMP/system.hw.uptime[hrSystemUptime.0])=0 and last(/MikroTik FiberBox by SNMP/system.net.uptime[sysUpTime.0])<10m)`|Warning|**Manual close**: YesThe name of the system has changed. Acknowledge to close the problem manually.
|`last(/MikroTik FiberBox by SNMP/system.name,#1)<>last(/MikroTik FiberBox by SNMP/system.name,#2) and length(last(/MikroTik FiberBox by SNMP/system.name))>0`|Info|**Manual close**: Yes| |Mikrotik: No SNMP data collection|SNMP is not available for polling. Please check device connectivity and SNMP settings.
|`max(/MikroTik FiberBox by SNMP/zabbix[host,snmp,available],{$SNMP.TIMEOUT})=0`|Warning|**Depends on**:Last three attempts returned timeout. Please check device connectivity.
|`max(/MikroTik FiberBox by SNMP/icmpping,#3)=0`|High|| |Mikrotik: High ICMP ping loss||`min(/MikroTik FiberBox by SNMP/icmppingloss,5m)>{$ICMP_LOSS_WARN} and min(/MikroTik FiberBox by SNMP/icmppingloss,5m)<100`|Warning|**Depends on**:HOST-RESOURCES-MIB::hrProcessorTable discovery.
|Dependent item|hrProcessorLoad.discovery**Preprocessing**
SNMP walk to JSON
Discard unchanged with heartbeat: `1h`
MIB: HOST-RESOURCES-MIB
The average, over the last minute, of the percentage of time that this processor was not idle. Implementations may approximate this one minute smoothing period if necessary.
|Dependent item|system.cpu.util[hrProcessorLoad.{#SNMPINDEX}]**Preprocessing**
SNMP walk value: `1.3.6.1.2.1.25.3.3.1.2.{#SNMPINDEX}`
CPU utilization is too high. The system might be slow to respond.
|`min(/MikroTik FiberBox by SNMP/system.cpu.util[hrProcessorLoad.{#SNMPINDEX}],5m)>{$CPU.UTIL.CRIT}`|Warning|| ### LLD rule Temperature CPU discovery |Name|Description|Type|Key and additional info| |----|-----------|----|-----------------------| |Temperature CPU discovery|MIKROTIK-MIB::mtxrHlProcessorTemperature
Since temperature of CPU is not available on all Mikrotik hardware, this is done to avoid unsupported items.
|Dependent item|mtxrHlProcessorTemperature.discovery**Preprocessing**
SNMP walk to JSON
⛔️Custom on fail: Discard value
Discard unchanged with heartbeat: `1h`
MIB: MIKROTIK-MIB
mtxrHlProcessorTemperature Processor temperature in Celsius (degrees C).
Might be missing in entry models (RB750, RB450G..).
|Dependent item|sensor.temp.value[mtxrHlProcessorTemperature.{#SNMPINDEX}]**Preprocessing**
SNMP walk value: `1.3.6.1.4.1.14988.1.1.3.11.{#SNMPINDEX}`
Custom multiplier: `0.1`
Discard unchanged with heartbeat: `3m`
This trigger uses temperature sensor values as well as temperature sensor status if available.
|`avg(/MikroTik FiberBox by SNMP/sensor.temp.value[mtxrHlProcessorTemperature.{#SNMPINDEX}],5m)>{$TEMP_WARN:"CPU"}`|Warning|**Depends on**:This trigger uses temperature sensor values as well as temperature sensor status if available.
|`avg(/MikroTik FiberBox by SNMP/sensor.temp.value[mtxrHlProcessorTemperature.{#SNMPINDEX}],5m)>{$TEMP_CRIT:"CPU"}`|High|| |CPU: Temperature is too low||`avg(/MikroTik FiberBox by SNMP/sensor.temp.value[mtxrHlProcessorTemperature.{#SNMPINDEX}],5m)<{$TEMP_CRIT_LOW:"CPU"}`|Average|| ### LLD rule Temperature sensor discovery |Name|Description|Type|Key and additional info| |----|-----------|----|-----------------------| |Temperature sensor discovery|MIKROTIK-MIB::mtxrHlTemperature
Since temperature sensor is not available on all Mikrotik hardware, this is done to avoid unsupported items.
|Dependent item|mtxrHlTemperature.discovery**Preprocessing**
SNMP walk to JSON
⛔️Custom on fail: Discard value
Discard unchanged with heartbeat: `1h`
MIB: MIKROTIK-MIB
mtxrHlTemperature Device temperature in Celsius (degrees C).
Might be missing in entry models (RB750, RB450G..).
Reference: http://wiki.mikrotik.com/wiki/Manual:SNMP
|Dependent item|sensor.temp.value[mtxrHlTemperature.{#SNMPINDEX}]**Preprocessing**
SNMP walk value: `1.3.6.1.4.1.14988.1.1.3.10.{#SNMPINDEX}`
Custom multiplier: `0.1`
Discard unchanged with heartbeat: `3m`
This trigger uses temperature sensor values as well as temperature sensor status if available.
|`avg(/MikroTik FiberBox by SNMP/sensor.temp.value[mtxrHlTemperature.{#SNMPINDEX}],5m)>{$TEMP_WARN:"Device"}`|Warning|**Depends on**:This trigger uses temperature sensor values as well as temperature sensor status if available.
|`avg(/MikroTik FiberBox by SNMP/sensor.temp.value[mtxrHlTemperature.{#SNMPINDEX}],5m)>{$TEMP_CRIT:"Device"}`|High|| |Device: Temperature is too low||`avg(/MikroTik FiberBox by SNMP/sensor.temp.value[mtxrHlTemperature.{#SNMPINDEX}],5m)<{$TEMP_CRIT_LOW:"Device"}`|Average|| ### LLD rule LTE modem discovery |Name|Description|Type|Key and additional info| |----|-----------|----|-----------------------| |LTE modem discovery|MIKROTIK-MIB::mtxrLTEModemInterfaceIndex.
|Dependent item|mtxrLTEModem.discovery**Preprocessing**
SNMP walk to JSON
Discard unchanged with heartbeat: `1h`
MIB: MIKROTIK-MIB
mtxrLTEModemSignalRSSI Received Signal Strength Indicator.
|Dependent item|lte.modem.rssi[mtxrLTEModemSignalRSSI.{#SNMPINDEX}]**Preprocessing**
SNMP walk value: `1.3.6.1.4.1.14988.1.1.16.1.1.2.{#SNMPINDEX}`
MIB: MIKROTIK-MIB
mtxrLTEModemSignalRSRP Reference Signal Received Power.
|Dependent item|lte.modem.rsrp[mtxrLTEModemSignalRSRP.{#SNMPINDEX}]**Preprocessing**
SNMP walk value: `1.3.6.1.4.1.14988.1.1.16.1.1.4.{#SNMPINDEX}`
MIB: MIKROTIK-MIB
mtxrLTEModemSignalRSRQ Reference Signal Received Quality.
|Dependent item|lte.modem.rsrq[mtxrLTEModemSignalRSRQ.{#SNMPINDEX}]**Preprocessing**
SNMP walk value: `1.3.6.1.4.1.14988.1.1.16.1.1.3.{#SNMPINDEX}`
MIB: MIKROTIK-MIB
mtxrLTEModemSignalSINR Signal to Interference & Noise Ratio.
|Dependent item|lte.modem.sinr[mtxrLTEModemSignalSINR.{#SNMPINDEX}]**Preprocessing**
SNMP walk value: `1.3.6.1.4.1.14988.1.1.16.1.1.7.{#SNMPINDEX}`
MIKROTIK-MIB::mtxrWlAp.
|Dependent item|mtxrWlAp.discovery**Preprocessing**
SNMP walk to JSON
Discard unchanged with heartbeat: `1h`
MIB: MIKROTIK-MIB
mtxrWlApSsid Service Set Identifier.
|Dependent item|ssid.name[mtxrWlApSsid.{#SNMPINDEX}]**Preprocessing**
SNMP walk value: `1.3.6.1.4.1.14988.1.1.1.3.1.4.{#SNMPINDEX}`
Discard unchanged with heartbeat: `1h`
MIB: MIKROTIK-MIB
mtxrWlApBand
|Dependent item|ssid.band[mtxrWlApBand.{#SNMPINDEX}]**Preprocessing**
SNMP walk value: `1.3.6.1.4.1.14988.1.1.1.3.1.8.{#SNMPINDEX}`
Discard unchanged with heartbeat: `1h`
MIB: MIKROTIK-MIB
mtxrWlApNoiseFloor
|Dependent item|ssid.noise[mtxrWlApNoiseFloor.{#SNMPINDEX}]**Preprocessing**
SNMP walk value: `1.3.6.1.4.1.14988.1.1.1.3.1.9.{#SNMPINDEX}`
Discard unchanged with heartbeat: `15m`
MIB: MIKROTIK-MIB
mtxrWlApClientCount Client established connection to AP, but didn't finish all authentication procedures for full connection.
|Dependent item|ssid.regclient[mtxrWlApClientCount.{#SNMPINDEX}]**Preprocessing**
SNMP walk value: `1.3.6.1.4.1.14988.1.1.1.3.1.6.{#SNMPINDEX}`
MIB: MIKROTIK-MIB
mtxrWlApAuthClientCount Number of authentication clients.
|Dependent item|ssid.authclient[mtxrWlApAuthClientCount.{#SNMPINDEX}]**Preprocessing**
SNMP walk value: `1.3.6.1.4.1.14988.1.1.1.3.1.11.{#SNMPINDEX}`
MIKROTIK-MIB::mtxrWlCMChannel.
|Dependent item|mtxrWlCMChannel.discovery**Preprocessing**
SNMP walk to JSON
Discard unchanged with heartbeat: `1h`
MIB: MIKROTIK-MIB
mtxrWlCMChannel
|Dependent item|ssid.channel[mtxrWlCMChannel.{#SNMPINDEX}]**Preprocessing**
SNMP walk value: `1.3.6.1.4.1.14988.1.1.1.7.1.5.{#SNMPINDEX}`
Discard unchanged with heartbeat: `1h`
MIB: MIKROTIK-MIB
mtxrWlCMState Wireless interface state.
|Dependent item|ssid.state[mtxrWlCMState.{#SNMPINDEX}]**Preprocessing**
SNMP walk value: `1.3.6.1.4.1.14988.1.1.1.7.1.4.{#SNMPINDEX}`
Discard unchanged with heartbeat: `1h`
MIB: MIKROTIK-MIB
mtxrWlCMRegClientCount Client established connection to AP, but didn't finish all authentication procedures for full connection.
|Dependent item|ssid.regclient[mtxrWlCMRegClientCount.{#SNMPINDEX}]**Preprocessing**
SNMP walk value: `1.3.6.1.4.1.14988.1.1.1.7.1.2.{#SNMPINDEX}`
MIB: MIKROTIK-MIB
mtxrWlCMAuthClientCount Number of authentication clients.
|Dependent item|ssid.authclient[mtxrWlCMAuthClientCount.{#SNMPINDEX}]**Preprocessing**
SNMP walk value: `1.3.6.1.4.1.14988.1.1.1.7.1.3.{#SNMPINDEX}`
Access point interface can be not running by different reasons - disabled interface, power off, network link down.
|`last(/MikroTik FiberBox by SNMP/ssid.state[mtxrWlCMState.{#SNMPINDEX}])<>"running-ap"`|Warning|| ### LLD rule Storage discovery |Name|Description|Type|Key and additional info| |----|-----------|----|-----------------------| |Storage discovery|HOST-RESOURCES-MIB::hrStorage discovery with storage filter.
|Dependent item|storage.discovery**Preprocessing**
SNMP walk to JSON
Discard unchanged with heartbeat: `1h`
MIB: HOST-RESOURCES-MIB
The amount of the storage represented by this entry that is allocated, in units of hrStorageAllocationUnits.
|Dependent item|vfs.fs.used[hrStorageSize.{#SNMPINDEX}]**Preprocessing**
SNMP walk value: `1.3.6.1.2.1.25.2.3.1.6.{#SNMPINDEX}`
Custom multiplier: `1024`
MIB: HOST-RESOURCES-MIB
The size of the storage represented by this entry, in
units of hrStorageAllocationUnits. This object is
writable to allow remote configuration of the size of
the storage area in those cases where such an
operation makes sense and is possible on the
underlying system. For example, the amount of main
memory allocated to a buffer pool might be modified or
the amount of disk space allocated to virtual memory
might be modified.
|Dependent item|vfs.fs.total[hrStorageSize.{#SNMPINDEX}]**Preprocessing**
SNMP walk value: `1.3.6.1.2.1.25.2.3.1.5.{#SNMPINDEX}`
Custom multiplier: `1024`
The space utilization expressed in % for Disk-{#SNMPINDEX}.
|Calculated|vfs.fs.pused[hrStorageSize.{#SNMPINDEX}]| ### Trigger prototypes for Storage discovery |Name|Description|Expression|Severity|Dependencies and additional info| |----|-----------|----------|--------|--------------------------------| |Disk-{#SNMPINDEX}: Disk space is critically low|Two conditions should match: First, space utilization should be above {$VFS.FS.PUSED.MAX.CRIT:"Disk-{#SNMPINDEX}"}.
Second condition should be one of the following:
- The disk free space is less than {$VFS.FS.FREE.MIN.CRIT:"Disk-{#SNMPINDEX}"}.
- The disk will be full in less than 24 hours.
Two conditions should match: First, space utilization should be above {$VFS.FS.PUSED.MAX.WARN:"Disk-{#SNMPINDEX}"}.
Second condition should be one of the following:
- The disk free space is less than {$VFS.FS.FREE.MIN.WARN:"Disk-{#SNMPINDEX}"}.
- The disk will be full in less than 24 hours.
Discovering interfaces from IF-MIB.
|Dependent item|net.if.discovery**Preprocessing**
SNMP walk to JSON
Discard unchanged with heartbeat: `1h`
MIB: IF-MIB
The current operational state of the interface.
- The testing(3) state indicates that no operational packet scan be passed
- If ifAdminStatus is down(2) then ifOperStatus should be down(2)
- If ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic
- It should change todormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection)
- It should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state
- It should remain in the notPresent(6) state if the interface has missing(typically, hardware) components.
|Dependent item|net.if.status[ifOperStatus.{#SNMPINDEX}]**Preprocessing**
SNMP walk value: `1.3.6.1.2.1.2.2.1.8.{#SNMPINDEX}`
MIB: IF-MIB
The total number of octets received on the interface, including framing characters. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
|Dependent item|net.if.in[ifHCInOctets.{#SNMPINDEX}]**Preprocessing**
SNMP walk value: `1.3.6.1.2.1.31.1.1.1.6.{#SNMPINDEX}`
Custom multiplier: `8`
MIB: IF-MIB
The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets.Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
|Dependent item|net.if.out[ifHCOutOctets.{#SNMPINDEX}]**Preprocessing**
SNMP walk value: `1.3.6.1.2.1.31.1.1.1.10.{#SNMPINDEX}`
Custom multiplier: `8`
MIB: IF-MIB
For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
|Dependent item|net.if.in.errors[ifInErrors.{#SNMPINDEX}]**Preprocessing**
SNMP walk value: `1.3.6.1.2.1.2.2.1.14.{#SNMPINDEX}`
Discard unchanged with heartbeat: `3m`
MIB: IF-MIB
For packet-oriented interfaces, the number of outbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of outbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
|Dependent item|net.if.out.errors[ifOutErrors.{#SNMPINDEX}]**Preprocessing**
SNMP walk value: `1.3.6.1.2.1.2.2.1.20.{#SNMPINDEX}`
Discard unchanged with heartbeat: `3m`
MIB: IF-MIB
The number of outbound packets which were chosen to be discarded
even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.
One possible reason for discarding such a packet could be to free up buffer space.
Discontinuities in the value of this counter can occur at re-initialization of the management system,
and at other times as indicated by the value of ifCounterDiscontinuityTime.
|Dependent item|net.if.out.discards[ifOutDiscards.{#SNMPINDEX}]**Preprocessing**
SNMP walk value: `1.3.6.1.2.1.2.2.1.19.{#SNMPINDEX}`
Discard unchanged with heartbeat: `3m`
MIB: IF-MIB
The number of inbound packets which were chosen to be discarded
even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.
One possible reason for discarding such a packet could be to free up buffer space.
Discontinuities in the value of this counter can occur at re-initialization of the management system,
and at other times as indicated by the value of ifCounterDiscontinuityTime.
|Dependent item|net.if.in.discards[ifInDiscards.{#SNMPINDEX}]**Preprocessing**
SNMP walk value: `1.3.6.1.2.1.2.2.1.13.{#SNMPINDEX}`
Discard unchanged with heartbeat: `3m`
MIB: IF-MIB
The type of interface.
Additional values for ifType are assigned by the Internet Assigned Numbers Authority (IANA),
through updating the syntax of the IANAifType textual convention.
|Dependent item|net.if.type[ifType.{#SNMPINDEX}]**Preprocessing**
SNMP walk value: `1.3.6.1.2.1.2.2.1.3.{#SNMPINDEX}`
Discard unchanged with heartbeat: `1d`
MIB: IF-MIB
An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of `n' then the speed of the interface is somewhere in the range of `n-500,000' to`n+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero.
|Dependent item|net.if.speed[ifHighSpeed.{#SNMPINDEX}]**Preprocessing**
SNMP walk value: `1.3.6.1.2.1.31.1.1.1.15.{#SNMPINDEX}`
Custom multiplier: `1000000`
Discard unchanged with heartbeat: `1h`
This trigger expression works as follows:
1. It can be triggered if the operations status is down.
2. `{$IFCONTROL:"{#IFNAME}"}=1` - a user can redefine context macro to value - 0. That marks this interface as not important. No new trigger will be fired if this interface is down.
3. `{TEMPLATE_NAME:METRIC.diff()}=1` - the trigger fires only if the operational status was up to (1) sometime before (so, do not fire for the 'eternal off' interfaces.)
WARNING: if closed manually - it will not fire again on the next poll, because of .diff.
The utilization of the network interface is close to its estimated maximum bandwidth.
|`(avg(/MikroTik FiberBox by SNMP/net.if.in[ifHCInOctets.{#SNMPINDEX}],15m)>({$IF.UTIL.MAX:"{#IFNAME}"}/100)*last(/MikroTik FiberBox by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}]) or avg(/MikroTik FiberBox by SNMP/net.if.out[ifHCOutOctets.{#SNMPINDEX}],15m)>({$IF.UTIL.MAX:"{#IFNAME}"}/100)*last(/MikroTik FiberBox by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])) and last(/MikroTik FiberBox by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])>0`|Warning|**Manual close**: YesIt recovers when it is below 80% of the `{$IF.ERRORS.WARN:"{#IFNAME}"}` threshold.
|`min(/MikroTik FiberBox by SNMP/net.if.in.errors[ifInErrors.{#SNMPINDEX}],5m)>{$IF.ERRORS.WARN:"{#IFNAME}"} or min(/MikroTik FiberBox by SNMP/net.if.out.errors[ifOutErrors.{#SNMPINDEX}],5m)>{$IF.ERRORS.WARN:"{#IFNAME}"}`|Warning|**Manual close**: YesThis Ethernet connection has transitioned down from its known maximum speed. This might be a sign of autonegotiation issues. Acknowledge to close the problem manually.
|`change(/MikroTik FiberBox by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])<0 and last(/MikroTik FiberBox by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])>0 and ( last(/MikroTik FiberBox by SNMP/net.if.type[ifType.{#SNMPINDEX}])=6 or last(/MikroTik FiberBox by SNMP/net.if.type[ifType.{#SNMPINDEX}])=7 or last(/MikroTik FiberBox by SNMP/net.if.type[ifType.{#SNMPINDEX}])=11 or last(/MikroTik FiberBox by SNMP/net.if.type[ifType.{#SNMPINDEX}])=62 or last(/MikroTik FiberBox by SNMP/net.if.type[ifType.{#SNMPINDEX}])=69 or last(/MikroTik FiberBox by SNMP/net.if.type[ifType.{#SNMPINDEX}])=117 ) and (last(/MikroTik FiberBox by SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])<>2)`|Info|**Manual close**: Yes