23 KiB
D-Link DES 7200 by SNMP
Overview
This template is designed for the effortless deployment of D-Link DES 7200 monitoring by Zabbix via SNMP and doesn't require any external scripts.
Requirements
Zabbix version: 7.0 and higher.
Tested versions
This template has been tested on:
- D-Link DES 7200
Configuration
Zabbix should be configured according to the instructions in the Templates out of the box section.
Setup
Refer to the vendor documentation.
Macros used
Name | Description | Default |
---|---|---|
{$CPU.UTIL.CRIT} | 90 |
|
{$TEMP_CRIT_LOW} | 5 |
|
{$TEMP_CRIT} | 75 |
|
{$TEMP_WARN} | 65 |
|
{$PSU_CRIT_STATUS} | 5 |
|
{$FAN_CRIT_STATUS} | 5 |
|
{$MEMORY.UTIL.MAX} | 90 |
|
{$SNMP.TIMEOUT} | 5m |
|
{$ICMP_LOSS_WARN} | 20 |
|
{$ICMP_RESPONSE_TIME_WARN} | 0.15 |
|
{$IF.ERRORS.WARN} | 2 |
|
{$IF.UTIL.MAX} | 90 |
|
{$IFCONTROL} | 1 |
|
{$NET.IF.IFNAME.MATCHES} | ^.*$ |
|
{$NET.IF.IFNAME.NOT_MATCHES} | Filter out loopbacks, nulls, docker veth links and docker0 bridge by default |
Macro too long. Please see the template. |
{$NET.IF.IFOPERSTATUS.MATCHES} | ^.*$ |
|
{$NET.IF.IFOPERSTATUS.NOT_MATCHES} | Ignore notPresent(6) |
^6$ |
{$NET.IF.IFADMINSTATUS.MATCHES} | Ignore notPresent(6) |
^.* |
{$NET.IF.IFADMINSTATUS.NOT_MATCHES} | Ignore down(2) administrative status |
^2$ |
{$NET.IF.IFDESCR.MATCHES} | .* |
|
{$NET.IF.IFDESCR.NOT_MATCHES} | CHANGE_IF_NEEDED |
|
{$NET.IF.IFALIAS.MATCHES} | .* |
|
{$NET.IF.IFALIAS.NOT_MATCHES} | CHANGE_IF_NEEDED |
|
{$NET.IF.IFTYPE.MATCHES} | .* |
|
{$NET.IF.IFTYPE.NOT_MATCHES} | CHANGE_IF_NEEDED |
Items
Name | Description | Type | Key and additional info |
---|---|---|---|
D-Link DES 7200: CPU utilization | MIB: MY-PROCESS-MIB The CPU utilization expressed in %. |
SNMP agent | system.cpu.util[myCPUUtilization5Min.0] |
D-Link DES 7200: Hardware model name | MIB: SNMPv2-MIB A textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-system, and networking software. |
SNMP agent | system.hw.model Preprocessing
|
D-Link DES 7200: Firmware version | MIB: ENTITY-MIBdescription has changed |
SNMP agent | system.hw.firmware Preprocessing
|
D-Link DES 7200: Hardware version(revision) | MIB: ENTITY-MIB |
SNMP agent | system.hw.version Preprocessing
|
D-Link DES 7200: Operating system | MIB: MY-SYSTEM-MIB |
SNMP agent | system.sw.os[mySystemSwVersion.0] Preprocessing
|
D-Link DES 7200: Uptime (network) | MIB: SNMPv2-MIB The time (in hundredths of a second) since the network management portion of the system was last re-initialized. |
SNMP agent | system.net.uptime[sysUpTime.0] Preprocessing
|
D-Link DES 7200: Uptime (hardware) | MIB: HOST-RESOURCES-MIB The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system. |
SNMP agent | system.hw.uptime[hrSystemUptime.0] Preprocessing
|
D-Link DES 7200: SNMP traps (fallback) | The item is used to collect all SNMP traps unmatched by other snmptrap items |
SNMP trap | snmptrap.fallback |
D-Link DES 7200: System location | MIB: SNMPv2-MIB The physical location of this node (e.g., `telephone closet, 3rd floor'). If the location is unknown, the value is the zero-length string. |
SNMP agent | system.location[sysLocation.0] Preprocessing
|
D-Link DES 7200: System contact details | MIB: SNMPv2-MIB The textual identification of the contact person for this managed node, together with information on how to contact this person. If no contact information is known, the value is the zero-length string. |
SNMP agent | system.contact[sysContact.0] Preprocessing
|
D-Link DES 7200: System object ID | MIB: SNMPv2-MIB The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determining |
SNMP agent | system.objectid[sysObjectID.0] Preprocessing
|
D-Link DES 7200: System name | MIB: SNMPv2-MIB An administratively-assigned name for this managed node.By convention, this is the node's fully-qualified domain name. If the name is unknown, the value is the zero-length string. |
SNMP agent | system.name Preprocessing
|
D-Link DES 7200: System description | MIB: SNMPv2-MIB A textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-system, and networking software. |
SNMP agent | system.descr[sysDescr.0] Preprocessing
|
D-Link DES 7200: SNMP agent availability | Availability of SNMP checks on the host. The value of this item corresponds to availability icons in the host list. Possible value: 0 - not available 1 - available 2 - unknown |
Zabbix internal | zabbix[host,snmp,available] |
D-Link DES 7200: ICMP ping | Simple check | icmpping | |
D-Link DES 7200: ICMP loss | Simple check | icmppingloss | |
D-Link DES 7200: ICMP response time | Simple check | icmppingsec |
Triggers
Name | Description | Expression | Severity | Dependencies and additional info |
---|---|---|---|---|
D-Link DES 7200: High CPU utilization | The CPU utilization is too high. The system might be slow to respond. |
min(/D-Link DES 7200 by SNMP/system.cpu.util[myCPUUtilization5Min.0],5m)>{$CPU.UTIL.CRIT} |
Warning | |
D-Link DES 7200: Firmware has changed | Firmware version has changed. Acknowledge to close the problem manually. |
last(/D-Link DES 7200 by SNMP/system.hw.firmware,#1)<>last(/D-Link DES 7200 by SNMP/system.hw.firmware,#2) and length(last(/D-Link DES 7200 by SNMP/system.hw.firmware))>0 |
Info | Manual close: Yes |
D-Link DES 7200: Operating system description has changed | Operating system description has changed. Possible reasons that system has been updated or replaced. Acknowledge to close the problem manually. |
last(/D-Link DES 7200 by SNMP/system.sw.os[mySystemSwVersion.0],#1)<>last(/D-Link DES 7200 by SNMP/system.sw.os[mySystemSwVersion.0],#2) and length(last(/D-Link DES 7200 by SNMP/system.sw.os[mySystemSwVersion.0]))>0 |
Info | Manual close: Yes Depends on:
|
D-Link DES 7200: Host has been restarted | Uptime is less than 10 minutes. |
(last(/D-Link DES 7200 by SNMP/system.hw.uptime[hrSystemUptime.0])>0 and last(/D-Link DES 7200 by SNMP/system.hw.uptime[hrSystemUptime.0])<10m) or (last(/D-Link DES 7200 by SNMP/system.hw.uptime[hrSystemUptime.0])=0 and last(/D-Link DES 7200 by SNMP/system.net.uptime[sysUpTime.0])<10m) |
Warning | Manual close: Yes Depends on:
|
D-Link DES 7200: System name has changed | The name of the system has changed. Acknowledge to close the problem manually. |
last(/D-Link DES 7200 by SNMP/system.name,#1)<>last(/D-Link DES 7200 by SNMP/system.name,#2) and length(last(/D-Link DES 7200 by SNMP/system.name))>0 |
Info | Manual close: Yes |
D-Link DES 7200: No SNMP data collection | SNMP is not available for polling. Please check device connectivity and SNMP settings. |
max(/D-Link DES 7200 by SNMP/zabbix[host,snmp,available],{$SNMP.TIMEOUT})=0 |
Warning | Depends on:
|
D-Link DES 7200: Unavailable by ICMP ping | Last three attempts returned timeout. Please check device connectivity. |
max(/D-Link DES 7200 by SNMP/icmpping,#3)=0 |
High | |
D-Link DES 7200: High ICMP ping loss | min(/D-Link DES 7200 by SNMP/icmppingloss,5m)>{$ICMP_LOSS_WARN} and min(/D-Link DES 7200 by SNMP/icmppingloss,5m)<100 |
Warning | Depends on:
|
|
D-Link DES 7200: High ICMP ping response time | avg(/D-Link DES 7200 by SNMP/icmppingsec,5m)>{$ICMP_RESPONSE_TIME_WARN} |
Warning | Depends on:
|
LLD rule Memory Discovery
Name | Description | Type | Key and additional info |
---|---|---|---|
Memory Discovery | SNMP agent | memory.discovery |
Item prototypes for Memory Discovery
Name | Description | Type | Key and additional info |
---|---|---|---|
{#SNMPINDEX}: Memory utilization | MIB: MY-MEMORY-MIB This is the memory pool utilization currently. |
SNMP agent | vm.memory.util[myMemoryPoolCurrentUtilization.{#SNMPINDEX}] |
Trigger prototypes for Memory Discovery
Name | Description | Expression | Severity | Dependencies and additional info |
---|---|---|---|---|
{#SNMPINDEX}: High memory utilization | The system is running out of free memory. |
min(/D-Link DES 7200 by SNMP/vm.memory.util[myMemoryPoolCurrentUtilization.{#SNMPINDEX}],5m)>{$MEMORY.UTIL.MAX} |
Average |
LLD rule Temperature Discovery
Name | Description | Type | Key and additional info |
---|---|---|---|
Temperature Discovery | SNMP agent | temperature.discovery |
Item prototypes for Temperature Discovery
Name | Description | Type | Key and additional info |
---|---|---|---|
{#SNMPVALUE}: Temperature | MIB: MY-SYSTEM-MIB Return the current temperature of the FastSwitch.The temperature display is not supported for the current temperature returns to 0. |
SNMP agent | sensor.temp.value[mySystemTemperatureCurrent.{#SNMPINDEX}] |
Trigger prototypes for Temperature Discovery
Name | Description | Expression | Severity | Dependencies and additional info |
---|---|---|---|---|
{#SNMPVALUE}: Temperature is above warning threshold | This trigger uses temperature sensor values as well as temperature sensor status if available |
avg(/D-Link DES 7200 by SNMP/sensor.temp.value[mySystemTemperatureCurrent.{#SNMPINDEX}],5m)>{$TEMP_WARN:"{#SNMPVALUE}"} |
Warning | Depends on:
|
{#SNMPVALUE}: Temperature is above critical threshold | This trigger uses temperature sensor values as well as temperature sensor status if available |
avg(/D-Link DES 7200 by SNMP/sensor.temp.value[mySystemTemperatureCurrent.{#SNMPINDEX}],5m)>{$TEMP_CRIT:"{#SNMPVALUE}"} |
High | |
{#SNMPVALUE}: Temperature is too low | avg(/D-Link DES 7200 by SNMP/sensor.temp.value[mySystemTemperatureCurrent.{#SNMPINDEX}],5m)<{$TEMP_CRIT_LOW:"{#SNMPVALUE}"} |
Average |
LLD rule PSU Discovery
Name | Description | Type | Key and additional info |
---|---|---|---|
PSU Discovery | SNMP agent | psu.discovery |
Item prototypes for PSU Discovery
Name | Description | Type | Key and additional info |
---|---|---|---|
{#SNMPVALUE}: Power supply status | MIB: MY-SYSTEM-MIB |
SNMP agent | sensor.psu.status[mySystemElectricalSourceIsNormal.{#SNMPINDEX}] |
Trigger prototypes for PSU Discovery
Name | Description | Expression | Severity | Dependencies and additional info |
---|---|---|---|---|
{#SNMPVALUE}: Power supply is in critical state | Please check the power supply unit for errors |
count(/D-Link DES 7200 by SNMP/sensor.psu.status[mySystemElectricalSourceIsNormal.{#SNMPINDEX}],#1,"eq","{$PSU_CRIT_STATUS}")=1 |
Average |
LLD rule FAN Discovery
Name | Description | Type | Key and additional info |
---|---|---|---|
FAN Discovery | SNMP agent | fan.discovery |
Item prototypes for FAN Discovery
Name | Description | Type | Key and additional info |
---|---|---|---|
{#SNMPVALUE}: Fan status | MIB: MY-SYSTEM-MIB |
SNMP agent | sensor.fan.status[mySystemFanIsNormal.{#SNMPINDEX}] |
Trigger prototypes for FAN Discovery
Name | Description | Expression | Severity | Dependencies and additional info |
---|---|---|---|---|
{#SNMPVALUE}: Fan is in critical state | Please check the fan unit |
count(/D-Link DES 7200 by SNMP/sensor.fan.status[mySystemFanIsNormal.{#SNMPINDEX}],#1,"eq","{$FAN_CRIT_STATUS}")=1 |
Average |
LLD rule Network interfaces discovery
Name | Description | Type | Key and additional info |
---|---|---|---|
Network interfaces discovery | Discovering interfaces from IF-MIB. |
SNMP agent | net.if.discovery |
Item prototypes for Network interfaces discovery
Name | Description | Type | Key and additional info |
---|---|---|---|
Interface {#IFNAME}({#IFALIAS}): Operational status | MIB: IF-MIB The current operational state of the interface. - The testing(3) state indicates that no operational packet scan be passed - If ifAdminStatus is down(2) then ifOperStatus should be down(2) - If ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic - It should change todormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection) - It should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state - It should remain in the notPresent(6) state if the interface has missing(typically, hardware) components. |
SNMP agent | net.if.status[ifOperStatus.{#SNMPINDEX}] |
Interface {#IFNAME}({#IFALIAS}): Bits received | MIB: IF-MIB The total number of octets received on the interface, including framing characters. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. |
SNMP agent | net.if.in[ifHCInOctets.{#SNMPINDEX}] Preprocessing
|
Interface {#IFNAME}({#IFALIAS}): Bits sent | MIB: IF-MIB The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets.Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. |
SNMP agent | net.if.out[ifHCOutOctets.{#SNMPINDEX}] Preprocessing
|
Interface {#IFNAME}({#IFALIAS}): Inbound packets with errors | MIB: IF-MIB For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. |
SNMP agent | net.if.in.errors[ifInErrors.{#SNMPINDEX}] Preprocessing
|
Interface {#IFNAME}({#IFALIAS}): Outbound packets with errors | MIB: IF-MIB For packet-oriented interfaces, the number of outbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of outbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. |
SNMP agent | net.if.out.errors[ifOutErrors.{#SNMPINDEX}] Preprocessing
|
Interface {#IFNAME}({#IFALIAS}): Outbound packets discarded | MIB: IF-MIB The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. |
SNMP agent | net.if.out.discards[ifOutDiscards.{#SNMPINDEX}] Preprocessing
|
Interface {#IFNAME}({#IFALIAS}): Inbound packets discarded | MIB: IF-MIB The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. |
SNMP agent | net.if.in.discards[ifInDiscards.{#SNMPINDEX}] Preprocessing
|
Interface {#IFNAME}({#IFALIAS}): Interface type | MIB: IF-MIB The type of interface. Additional values for ifType are assigned by the Internet Assigned Numbers Authority (IANA), through updating the syntax of the IANAifType textual convention. |
SNMP agent | net.if.type[ifType.{#SNMPINDEX}] Preprocessing
|
Interface {#IFNAME}({#IFALIAS}): Speed | MIB: IF-MIB An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of |
SNMP agent | net.if.speed[ifHighSpeed.{#SNMPINDEX}] Preprocessing
|
Trigger prototypes for Network interfaces discovery
Name | Description | Expression | Severity | Dependencies and additional info |
---|---|---|---|---|
Interface {#IFNAME}({#IFALIAS}): Link down | This trigger expression works as follows: |
{$IFCONTROL:"{#IFNAME}"}=1 and last(/D-Link DES 7200 by SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])=2 and (last(/D-Link DES 7200 by SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}],#1)<>last(/D-Link DES 7200 by SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}],#2)) |
Average | Manual close: Yes |
Interface {#IFNAME}({#IFALIAS}): High bandwidth usage | The utilization of the network interface is close to its estimated maximum bandwidth. |
(avg(/D-Link DES 7200 by SNMP/net.if.in[ifHCInOctets.{#SNMPINDEX}],15m)>({$IF.UTIL.MAX:"{#IFNAME}"}/100)*last(/D-Link DES 7200 by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}]) or avg(/D-Link DES 7200 by SNMP/net.if.out[ifHCOutOctets.{#SNMPINDEX}],15m)>({$IF.UTIL.MAX:"{#IFNAME}"}/100)*last(/D-Link DES 7200 by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])) and last(/D-Link DES 7200 by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])>0 |
Warning | Manual close: Yes Depends on:
|
Interface {#IFNAME}({#IFALIAS}): High error rate | It recovers when it is below 80% of the |
min(/D-Link DES 7200 by SNMP/net.if.in.errors[ifInErrors.{#SNMPINDEX}],5m)>{$IF.ERRORS.WARN:"{#IFNAME}"} or min(/D-Link DES 7200 by SNMP/net.if.out.errors[ifOutErrors.{#SNMPINDEX}],5m)>{$IF.ERRORS.WARN:"{#IFNAME}"} |
Warning | Manual close: Yes Depends on:
|
Interface {#IFNAME}({#IFALIAS}): Ethernet has changed to lower speed than it was before | This Ethernet connection has transitioned down from its known maximum speed. This might be a sign of autonegotiation issues. Acknowledge to close the problem manually. |
change(/D-Link DES 7200 by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])<0 and last(/D-Link DES 7200 by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])>0 and ( last(/D-Link DES 7200 by SNMP/net.if.type[ifType.{#SNMPINDEX}])=6 or last(/D-Link DES 7200 by SNMP/net.if.type[ifType.{#SNMPINDEX}])=7 or last(/D-Link DES 7200 by SNMP/net.if.type[ifType.{#SNMPINDEX}])=11 or last(/D-Link DES 7200 by SNMP/net.if.type[ifType.{#SNMPINDEX}])=62 or last(/D-Link DES 7200 by SNMP/net.if.type[ifType.{#SNMPINDEX}])=69 or last(/D-Link DES 7200 by SNMP/net.if.type[ifType.{#SNMPINDEX}])=117 ) and (last(/D-Link DES 7200 by SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])<>2) |
Info | Manual close: Yes Depends on:
|
Feedback
Please report any issues with the template at https://support.zabbix.com
You can also provide feedback, discuss the template, or ask for help at ZABBIX forums