yzl 93958d0fb0 | 1 year ago | |
---|---|---|
.. | ||
README.md | 1 year ago | |
template_net_zyxel_ies1248-51_snmp.yaml | 1 year ago |
README.md
ZYXEL IES1248-51 by SNMP
Overview
http://origin-eu.zyxel.com/products_services/ies_1248_51v.shtml?t=p
Known Issues
Description: Incorrect handling of SNMP bulk requests. Disable the use of bulk requests in the SNMP interface settings. Version: all versions firmware Device: ZYXEL IES1248-51
Requirements
Zabbix version: 7.0 and higher.
Tested versions
This template has been tested on:
- ZYXEL IES1248-51
Configuration
Zabbix should be configured according to the instructions in the Templates out of the box section.
Setup
Refer to the vendor documentation.
Macros used
Name | Description | Default |
---|---|---|
{$ZYXEL.LLD.FILTER.IF.CONTROL.MATCHES} | Triggers will be created only for interfaces whose description contains the value of this macro |
CHANGE_IF_NEEDED |
{$SNMP.TIMEOUT} | The time interval for SNMP agent availability trigger expression. |
5m |
{$ZYXEL.ADSL.SNR.MIN} | Type the minimum signal to noise margin (0-31 dB) |
8 |
{$ZYXEL.ADSL.ATN.MAX} | Type the maximum signal attenuation |
40 |
{$ZYXEL.LLD.FILTER.IF.LINKSTATUS.MATCHES} | Filter of discoverable link types. |
.* |
{$ZYXEL.LLD.FILTER.IF.LINKSTATUS.NOT_MATCHES} | Filter to exclude discovered by link types. |
2 |
Items
Name | Description | Type | Key and additional info |
---|---|---|---|
ZYXEL IES1248-51: SNMP agent availability | Zabbix internal | zabbix[host,snmp,available] Preprocessing
|
|
ZYXEL IES1248-51: Hardware model name | MIB: RFC1213-MIB A textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-system, and networking software. It is mandatory that this only contain printable ASCII characters. |
SNMP agent | zyxel.ies1248.model Preprocessing
|
ZYXEL IES1248-51: Contact | MIB: RFC1213-MIB The textual identification of the contact person for this managed node, together with information on how to contact this person. |
SNMP agent | zyxel.ies1248.contact Preprocessing
|
ZYXEL IES1248-51: Host name | MIB: RFC1213-MIB An administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name. |
SNMP agent | zyxel.ies1248.name Preprocessing
|
ZYXEL IES1248-51: Location | MIB: RFC1213-MIB The physical location of this node (e.g., `telephone closet, 3rd floor'). |
SNMP agent | zyxel.ies1248.location Preprocessing
|
ZYXEL IES1248-51: MAC address | MIB: IF-MIB The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length. |
SNMP agent | zyxel.ies1248.mac Preprocessing
|
ZYXEL IES1248-51: Uptime (network) | MIB: RFC1213-MIB The time (in hundredths of a second) since the network management portion of the system was last re-initialized. |
SNMP agent | zyxel.ies1248.net.uptime Preprocessing
|
ZYXEL IES1248-51: Uptime (hardware) | MIB: HOST-RESOURCES-MIB The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system. |
SNMP agent | zyxel.ies1248.hw.uptime Preprocessing
|
ZYXEL IES1248-51: ZyNOS F/W Version | MIB: ZYXEL-IESCOMMON-MIB |
SNMP agent | zyxel.ies1248.fwversion Preprocessing
|
ZYXEL IES1248-51: Hardware serial number | MIB: ZYXEL-IESCOMMON-MIB Serial number |
SNMP agent | zyxel.ies1248.serialnumber Preprocessing
|
ZYXEL IES1248-51: Alarm status | MIB: ZYXEL-IESCOMMON-MIB This variable indicates the alarm status of the module. It is a bit map represented a sum, therefore, it can represent multiple defects simultaneously. The moduleNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 moduleNoDefect 2 moduleOverHeat 3 moduleFanRpmLow 4 moduleVoltageLow 5 moduleThermalSensorFailure 6 modulePullOut 7 powerDC48VAFailure 8 powerDC48VBFailure 9 extAlarmInputTrigger 10 moduleDown 11 mscSwitchOverOK 12 networkTopologyChange 13 macSpoof 14 cpuHigh 15 memoryUsageHigh 16 packetBufferUsageHigh 17 loopguardOccurence |
SNMP agent | zyxel.ies1248.slot.alarm Preprocessing
|
Triggers
Name | Description | Expression | Severity | Dependencies and additional info |
---|---|---|---|---|
ZYXEL IES1248-51: No SNMP data collection | SNMP is not available for polling. Please check device connectivity and SNMP settings. |
max(/ZYXEL IES1248-51 by SNMP/zabbix[host,snmp,available],{$SNMP.TIMEOUT})=0 |
Warning | |
ZYXEL IES1248-51: Template does not match hardware | This template is for Zyxel IES1248-51, but connected to {ITEM.VALUE} |
last(/ZYXEL IES1248-51 by SNMP/zyxel.ies1248.model)<>"IES1248-51" |
Info | Manual close: Yes |
ZYXEL IES1248-51: Host has been restarted | Uptime is less than 10 minutes. |
(last(/ZYXEL IES1248-51 by SNMP/zyxel.ies1248.hw.uptime)>0 and last(/ZYXEL IES1248-51 by SNMP/zyxel.ies1248.hw.uptime)<10m) or (last(/ZYXEL IES1248-51 by SNMP/zyxel.ies1248.hw.uptime)=0 and last(/ZYXEL IES1248-51 by SNMP/zyxel.ies1248.net.uptime)<10m) |
Info | Manual close: Yes |
ZYXEL IES1248-51: Firmware has changed | Firmware version has changed. Acknowledge to close the problem manually. |
last(/ZYXEL IES1248-51 by SNMP/zyxel.ies1248.fwversion,#1)<>last(/ZYXEL IES1248-51 by SNMP/zyxel.ies1248.fwversion,#2) and length(last(/ZYXEL IES1248-51 by SNMP/zyxel.ies1248.fwversion))>0 |
Info | Manual close: Yes |
ZYXEL IES1248-51: Device has been replaced | Device serial number has changed. Acknowledge to close the problem manually. |
last(/ZYXEL IES1248-51 by SNMP/zyxel.ies1248.serialnumber,#1)<>last(/ZYXEL IES1248-51 by SNMP/zyxel.ies1248.serialnumber,#2) and length(last(/ZYXEL IES1248-51 by SNMP/zyxel.ies1248.serialnumber))>0 |
Info | Manual close: Yes |
ZYXEL IES1248-51: Port {#SNMPINDEX} alarm | The slot reported an error. |
find(/ZYXEL IES1248-51 by SNMP/zyxel.ies1248.slot.alarm,,"like","moduleNoDefect")=0 |
Average | Manual close: Yes |
LLD rule Fan discovery
Name | Description | Type | Key and additional info |
---|---|---|---|
Fan discovery | An entry in fanRpmTable. |
SNMP agent | zyxel.ies1248.fan.discovery |
Item prototypes for Fan discovery
Name | Description | Type | Key and additional info |
---|---|---|---|
ZYXEL IES1248-51: Fan #{#SNMPINDEX} | MIB: ZYXEL-IESCOMMON-MIB Current speed in Revolutions Per Minute (RPM) on the fan. |
SNMP agent | zyxel.ies1248.fan[{#SNMPINDEX}] Preprocessing
|
Trigger prototypes for Fan discovery
Name | Description | Expression | Severity | Dependencies and additional info |
---|---|---|---|---|
ZYXEL IES1248-51: FAN{#SNMPINDEX} is in critical state | Please check the fan unit |
last(/ZYXEL IES1248-51 by SNMP/zyxel.ies1248.fan[{#SNMPINDEX}])<{#ZYXEL.FANRPM.THRESH.LOW} |
Average |
LLD rule Temperature discovery
Name | Description | Type | Key and additional info |
---|---|---|---|
Temperature discovery | An entry in tempTable. |
SNMP agent | zyxel.ies1248.temp.discovery |
Item prototypes for Temperature discovery
Name | Description | Type | Key and additional info |
---|---|---|---|
ZYXEL IES1248-51: Temperature "{#ZYXEL.TEMP.ID}" | MIB: ZYXEL-IESCOMMON-MIB The current temperature measured at this sensor |
SNMP agent | zyxel.ies1248.temp[{#SNMPINDEX}] Preprocessing
|
Trigger prototypes for Temperature discovery
Name | Description | Expression | Severity | Dependencies and additional info |
---|---|---|---|---|
ZYXEL IES1248-51: Temperature {#ZYXEL.TEMP.ID} is in critical state | Please check the temperature |
last(/ZYXEL IES1248-51 by SNMP/zyxel.ies1248.temp[{#SNMPINDEX}])>{#ZYXEL.TEMP.THRESH.HIGH} |
Average |
LLD rule Voltage discovery
Name | Description | Type | Key and additional info |
---|---|---|---|
Voltage discovery | An entry in voltageTable. |
SNMP agent | zyxel.ies1248.volt.discovery Preprocessing
|
Item prototypes for Voltage discovery
Name | Description | Type | Key and additional info |
---|---|---|---|
ZYXEL IES1248-51: Nominal "{#ZYXEL.VOLT.NOMINAL}" | MIB: ZYXEL-IESCOMMON-MIB The current voltage reading. |
SNMP agent | zyxel.ies1248.volt[{#SNMPINDEX}] Preprocessing
|
Trigger prototypes for Voltage discovery
Name | Description | Expression | Severity | Dependencies and additional info |
---|---|---|---|---|
ZYXEL IES1248-51: Voltage {#ZYXEL.VOLT.NOMINAL} is in critical state | Please check the power supply |
last(/ZYXEL IES1248-51 by SNMP/zyxel.ies1248.volt[{#SNMPINDEX}])<{#ZYXEL.VOLT.THRESH.LOW} |
Average |
LLD rule Ethernet interface discovery
Name | Description | Type | Key and additional info |
---|---|---|---|
Ethernet interface discovery | SNMP agent | zyxel.ies1248.net.if.discovery |
Item prototypes for Ethernet interface discovery
Name | Description | Type | Key and additional info |
---|---|---|---|
ZYXEL IES1248-51: Port {#SNMPINDEX}: Interface name | MIB: IF-MIB A textual string containing information about the interface |
SNMP agent | zyxel.ies1248.net.if.name[{#SNMPINDEX}] Preprocessing
|
ZYXEL IES1248-51: Port {#ZYXEL.IF.NAME}: Operational status | MIB: IF-MIB The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. |
SNMP agent | zyxel.ies1248.net.if.operstatus[{#SNMPINDEX}] Preprocessing
|
ZYXEL IES1248-51: Port {#ZYXEL.IF.NAME}: Administrative status | MIB: IF-MIB The desired state of the interface. The testing(3) state indicates that no operational packets can be passed. |
SNMP agent | zyxel.ies1248.net.if.adminstatus[{#SNMPINDEX}] Preprocessing
|
ZYXEL IES1248-51: Port {#ZYXEL.IF.NAME}: Incoming traffic | MIB: IF-MIB The total number of octets received on the interface, including framing characters. |
SNMP agent | zyxel.ies1248.net.if.in.traffic[{#SNMPINDEX}] Preprocessing
|
ZYXEL IES1248-51: Port {#ZYXEL.IF.NAME}: Outgoing traffic | MIB: IF-MIB The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets. |
SNMP agent | zyxel.ies1248.net.if.out.traffic[{#SNMPINDEX}] Preprocessing
|
Trigger prototypes for Ethernet interface discovery
Name | Description | Expression | Severity | Dependencies and additional info |
---|---|---|---|---|
ZYXEL IES1248-51: Port {#ZYXEL.IF.NAME}: Link down | This trigger expression works as follows: |
last(/ZYXEL IES1248-51 by SNMP/zyxel.ies1248.net.if.operstatus[{#SNMPINDEX}])=2 and last(/ZYXEL IES1248-51 by SNMP/zyxel.ies1248.net.if.operstatus[{#SNMPINDEX}],#1)<>last(/ZYXEL IES1248-51 by SNMP/zyxel.ies1248.net.if.operstatus[{#SNMPINDEX}],#2) |
Average | Manual close: Yes |
LLD rule ADSL interface discovery
Name | Description | Type | Key and additional info |
---|---|---|---|
ADSL interface discovery | SNMP agent | zyxel.ies1248.net.adsl.discovery |
Item prototypes for ADSL interface discovery
Name | Description | Type | Key and additional info |
---|---|---|---|
ZYXEL IES1248-51: Port {#SNMPINDEX}: Interface name | MIB: IF-MIB A textual string containing information about the interface |
SNMP agent | zyxel.ies1248.net.adsl.name[{#SNMPINDEX}] Preprocessing
|
ZYXEL IES1248-51: Port {#SNMPINDEX}: Operational status | MIB: IF-MIB The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. |
SNMP agent | zyxel.ies1248.net.adsl.operstatus[{#SNMPINDEX}] Preprocessing
|
ZYXEL IES1248-51: Port {#SNMPINDEX}: Administrative status | MIB: IF-MIB The desired state of the interface. The testing(3) state indicates that no operational packets can be passed. |
SNMP agent | zyxel.ies1248.net.adsl.adminstatus[{#SNMPINDEX}] Preprocessing
|
ZYXEL IES1248-51: Port {#SNMPINDEX}: Incoming traffic | MIB: IF-MIB The total number of octets received on the interface, including framing characters. |
SNMP agent | zyxel.ies1248.net.adsl.in.traffic[{#SNMPINDEX}] Preprocessing
|
ZYXEL IES1248-51: Port {#SNMPINDEX}: Outgoing traffic | MIB: IF-MIB The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets. |
SNMP agent | zyxel.ies1248.net.adsl.out.traffic[{#SNMPINDEX}] Preprocessing
|
ZYXEL IES1248-51: Port {#SNMPINDEX}: ATUC noise margin | MIB: ADSL-LINE-MIB Noise Margin as seen by this ATU with respect to its received signal in tenth dB. The Info Atuc fields show data acquired from the ATUC (ADSL Termination Unit - Central), in this case ZYXEL IES1248-51, during negotiation/provisioning message interchanges. |
SNMP agent | zyxel.ies1248.net.adsl.atuc.snrmgn[{#SNMPINDEX}] Preprocessing
|
ZYXEL IES1248-51: Port {#SNMPINDEX}: ATUC attenuation | MIB: ADSL-LINE-MIB Measured difference in the total power transmitted by the peer ATU and the total power received by this ATU. The Info Atuc fields show data acquired from the ATUC (ADSL Termination Unit - Central), in this case ZYXEL IES1248-51, during negotiation/provisioning message interchanges. |
SNMP agent | zyxel.ies1248.net.adsl.atuc.atn[{#SNMPINDEX}] Preprocessing
|
ZYXEL IES1248-51: Port {#SNMPINDEX}: ATUC output power | MIB: ADSL-LINE-MIB Measured total output power transmitted by this ATU. The Info Atuc fields show data acquired from the ATUC (ADSL Termination Unit - Central), in this case ZYXEL IES1248-51, during negotiation/provisioning message interchanges. |
SNMP agent | zyxel.ies1248.net.adsl.atuc.outpwr[{#SNMPINDEX}] Preprocessing
|
ZYXEL IES1248-51: Port {#SNMPINDEX}: ATUR noise margin | MIB: ADSL-LINE-MIB Noise Margin as seen by this ATU with respect to its received signal in tenth dB. The Info Atur fields show data acquired from the ATUR (ADSL Termination Unit - Remote), in this case the subscriber's ADSL modem or router, during negotiation/provisioning message interchanges. |
SNMP agent | zyxel.ies1248.net.adsl.atur.snrmgn[{#SNMPINDEX}] Preprocessing
|
ZYXEL IES1248-51: Port {#SNMPINDEX}: ATUR attenuation | MIB: ADSL-LINE-MIB Measured difference in the total power transmitted by the peer ATU and the total power received by this ATU. The Info Atur fields show data acquired from the ATUR (ADSL Termination Unit - Remote), in this case the subscriber's ADSL modem or router, during negotiation/provisioning message interchanges. |
SNMP agent | zyxel.ies1248.net.adsl.atur.atn[{#SNMPINDEX}] Preprocessing
|
ZYXEL IES1248-51: Port {#SNMPINDEX}: ATUR output power | MIB: ADSL-LINE-MIB Measured total output power transmitted by this ATU. The Info Atur fields show data acquired from the ATUR (ADSL Termination Unit - Remote), in this case the subscriber's ADSL modem or router, during negotiation/provisioning message interchanges. |
SNMP agent | zyxel.ies1248.net.adsl.atur.outpwr[{#SNMPINDEX}] Preprocessing
|
Trigger prototypes for ADSL interface discovery
Name | Description | Expression | Severity | Dependencies and additional info |
---|---|---|---|---|
ZYXEL IES1248-51: Port {#SNMPINDEX}: Link down | This trigger expression works as follows: |
last(/ZYXEL IES1248-51 by SNMP/zyxel.ies1248.net.adsl.operstatus[{#SNMPINDEX}])=2 and last(/ZYXEL IES1248-51 by SNMP/zyxel.ies1248.net.adsl.operstatus[{#SNMPINDEX}],#1)<>last(/ZYXEL IES1248-51 by SNMP/zyxel.ies1248.net.adsl.operstatus[{#SNMPINDEX}],#2) |
Average | Manual close: Yes |
ZYXEL IES1248-51: Low the DSL line noise margins in Port {#SNMPINDEX} | Signal-to-noise margin (SNR Margin) which is the difference between the actual SNR and the SNR required to sync at a specific speed |
min(/ZYXEL IES1248-51 by SNMP/zyxel.ies1248.net.adsl.atuc.snrmgn[{#SNMPINDEX}],5m)<{$ZYXEL.ADSL.SNR.MIN} |
Warning | |
ZYXEL IES1248-51: High the DSL line attenuation in Port {#SNMPINDEX} | The reductions in amplitude of the downstream and upstream DSL signals. |
min(/ZYXEL IES1248-51 by SNMP/zyxel.ies1248.net.adsl.atuc.atn[{#SNMPINDEX}],5m)>{$ZYXEL.ADSL.ATN.MAX} |
Warning | |
ZYXEL IES1248-51: Low the DSL line noise margins in Port {#SNMPINDEX} | Signal-to-noise margin (SNR Margin) which is the difference between the actual SNR and the SNR required to sync at a specific speed |
min(/ZYXEL IES1248-51 by SNMP/zyxel.ies1248.net.adsl.atur.snrmgn[{#SNMPINDEX}],5m)<{$ZYXEL.ADSL.SNR.MIN} |
Warning | |
ZYXEL IES1248-51: High the DSL line attenuation in Port {#SNMPINDEX} | The reductions in amplitude of the downstream and upstream DSL signals. |
min(/ZYXEL IES1248-51 by SNMP/zyxel.ies1248.net.adsl.atur.atn[{#SNMPINDEX}],5m)>{$ZYXEL.ADSL.ATN.MAX} |
Warning |
Feedback
Please report any issues with the template at https://support.zabbix.com
You can also provide feedback, discuss the template, or ask for help at ZABBIX forums