You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

298 lines
10 KiB

# Copyright (c) 2013 - present Facebook, Inc.
# All rights reserved.
#
# This source code is licensed under the BSD style license found in the
# LICENSE file in the root directory of this source tree. An additional grant
# of patent rights can be found in the PATENTS file in the same directory.
ROOT_DIR = ../..
include $(ROOT_DIR)/Makefile.config
#### Global declarations ####
ETC_DIR = $(INFER_DIR)/etc
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
# paths to BUILD_DIR are relative because that's how jbuilder likes it
INFER_BUILD_DIR = _build/default
ATDGEN_SUFFIXES = _t.ml _t.mli _j.ml _j.mli
#### Backend declarations ####
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
INFER_MAIN = infer
#### Checkers declarations ####
STACKTREE_ATDGEN_STUB_BASE = atd/stacktree
STACKTREE_ATDGEN_STUB_ATD = $(STACKTREE_ATDGEN_STUB_BASE).atd
STACKTREE_ATDGEN_STUBS = $(addprefix $(STACKTREE_ATDGEN_STUB_BASE), $(ATDGEN_SUFFIXES))
#### InferPrint declarations ####
INFERPRINT_ATDGEN_STUB_BASE = atd/jsonbug
INFERPRINT_ATDGEN_STUB_ATD = $(INFERPRINT_ATDGEN_STUB_BASE).atd
INFERPRINT_ATDGEN_STUBS = $(addprefix $(INFERPRINT_ATDGEN_STUB_BASE), $(ATDGEN_SUFFIXES))
#### InferCreateTraceViewLinks declarations ####
FACEBOOK_DIR = facebook
INFER_CREATE_TRACEVIEW_LINKS_MODULE = InferCreateTraceViewLinks
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
INFER_CREATE_TRACEVIEW_LINKS_MAIN = $(INFER_CREATE_TRACEVIEW_LINKS_MODULE)
### InferUnit declarations ###
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
INFERUNIT_MAIN = inferunit
#### Clang declarations ####
CLANG_PLUGIN_MIRROR = atd
FCP_CLANG_OCAML_BUILD_DIR = $(FCP_CLANG_OCAML_DIR)/build
CLANG_PLUGIN_BINARIES = $(addprefix $(FCP_CLANG_OCAML_BUILD_DIR), \
clang_ast_converter clang_ast_named_decl_printer)
CLANG_AST_BASE_NAME = clang_ast
CLANG_ATDGEN_STUB_BASE = $(CLANG_PLUGIN_MIRROR)/$(CLANG_AST_BASE_NAME)
CLANG_ATDGEN_STUB_ATD = $(FCP_CLANG_OCAML_BUILD_DIR)/$(CLANG_AST_BASE_NAME).atd
CLANG_ATDGEN_SUFFIXES = _t.ml _t.mli _b.ml _b.mli _j.ml _j.mli _v.ml _v.mli
CLANG_ATDGEN_STUBS = $(addprefix $(CLANG_ATDGEN_STUB_BASE), $(CLANG_ATDGEN_SUFFIXES))
FCP_CLANG_AST_PROJ = $(addprefix $(FCP_CLANG_OCAML_BUILD_DIR)/, \
clang_ast_proj.ml clang_ast_proj.mli)
FCP_CLANG_AST_MAIN = $(addprefix $(FCP_CLANG_OCAML_DIR)/, clang_ast_visit.ml clang_ast_types.ml)
FCP_FILES_TO_MIRROR = $(FCP_CLANG_AST_PROJ) $(FCP_CLANG_AST_MAIN)
CLANG_PLUGIN_MIRRORED_FILES = $(addprefix $(CLANG_PLUGIN_MIRROR)/, $(notdir $(FCP_FILES_TO_MIRROR)))
CLANG_BINIOU_DICT = $(ETC_DIR)/clang_ast.dict
#### scripts declarations ####
CHECKCOPYRIGHT_BIN = $(SCRIPT_DIR)/checkCopyright
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
CHECKCOPYRIGHT_MAIN = checkCopyright
#### End of declarations ####
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
ifeq ($(ENABLE_OCAMLOPT_CUSTOM_CC),yes)
EXTRA_CFLAGS += -cc,$(CC)
endif
# list of ocamlbuild targets common to all build targets -- native version
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
INFER_CONFIG_TARGETS = $(INFER_BUILD_DIR)/$(INFER_MAIN).exe
ifeq ($(IS_FACEBOOK_TREE),yes)
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
INFER_CONFIG_TARGETS += $(INFER_BUILD_DIR)/$(INFER_CREATE_TRACEVIEW_LINKS_MAIN).exe
endif
OCAML_GENERATED_SOURCES = \
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
base/Version.ml $(STACKTREE_ATDGEN_STUBS) $(INFERPRINT_ATDGEN_STUBS)
ifeq ($(BUILD_C_ANALYZERS),yes)
OCAML_GENERATED_SOURCES += $(CLANG_ATDGEN_STUBS) $(CLANG_PLUGIN_MIRRORED_FILES)
endif
OCAML_SOURCES = \
$(wildcard */[a-zA-Z]*.ml */[a-zA-Z]*.ml[ily]) \
$(OCAML_GENERATED_SOURCES)
.PHONY: all
all: infer
GENERATED_FROM_AUTOCONF = jbuild.common jbuild-workspace base/Version.ml
GENERATED_JBUILDS = jbuild atd/jbuild istd/jbuild scripts/jbuild
SRC_BUILD_COMMON = $(GENERATED_FROM_AUTOCONF) $(GENERATED_JBUILDS) $(OCAML_SOURCES)
ifeq ($(BUILD_C_ANALYZERS),yes)
SRC_BUILD_COMMON += $(CLANG_BINIOU_DICT)
endif
.PHONY: src_build_common
src_build_common: $(SRC_BUILD_COMMON)
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
# single out infer.exe as the source of truth for make, knowing that in fact several targets are
# produced by the build
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
$(INFER_BUILD_DIR)/$(INFER_MAIN).exe: $(SRC_BUILD_COMMON) $(MAKEFILE_LIST)
$(QUIET)jbuilder build $(INFER_CONFIG_TARGETS)
# let make know that the target is up-to-date even if ocamlbuild cached it
$(QUIET)touch $@
.PHONY: test
test: $(SRC_BUILD_COMMON) $(MAKEFILE_LIST)
$(QUIET)jbuilder build \
$(patsubst _build/default/%.exe,_build/test/%.bc,$(INFER_CONFIG_TARGETS)) \
_build/test/scripts/checkCopyright.bc _build/test/$(INFERUNIT_MAIN).bc _build/test/infertop.bc
INFER_BIN_ALIASES = $(foreach alias,$(INFER_COMMANDS),$(BIN_DIR)/$(alias))
$(INFER_BIN_ALIASES): Makefile
# make sure the bin directory exists
$(QUIET)$(MKDIR_P) $(@D)
$(QUIET)cd $(@D) && $(LN_S) -f infer $(@F)
$(QUIET)touch $@
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
$(INFER_BIN).exe: $(INFER_BUILD_DIR)/$(INFER_MAIN).exe $(INFER_BIN_ALIASES)
$(INSTALL_PROGRAM) $(INFER_BUILD_DIR)/$(INFER_MAIN).exe $(INFER_BIN)
$(INSTALL_PROGRAM) $(INFER_BUILD_DIR)/$(INFER_MAIN).exe $(INFER_BIN).exe
ifeq ($(IS_FACEBOOK_TREE),yes)
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
$(INSTALL_PROGRAM) $(INFER_BUILD_DIR)/$(INFER_CREATE_TRACEVIEW_LINKS_MAIN).exe \
$(INFER_CREATE_TRACEVIEW_LINKS_BIN)
endif
.PHONY: infer
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
infer: $(INFER_BIN).exe
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
$(INFER_BUILD_DIR)/$(INFER_MAIN).bc: $(SRC_BUILD_COMMON) $(MAKEFILE_LIST)
jbuilder build $(INFER_CONFIG_TARGETS:.exe=.bc)
$(QUIET)touch $@
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
$(INFER_BIN).bc: $(INFER_BUILD_DIR)/$(INFER_MAIN).bc $(INFER_BIN_ALIASES)
$(INSTALL_PROGRAM) $(INFER_BUILD_DIR)/$(INFER_MAIN).bc $(INFER_BIN)
$(INSTALL_PROGRAM) $(INFER_BUILD_DIR)/$(INFER_MAIN).bc $(INFER_BIN).bc
ifeq ($(IS_FACEBOOK_TREE),yes)
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
$(INSTALL_PROGRAM) $(INFER_BUILD_DIR)/$(INFER_CREATE_TRACEVIEW_LINKS_MAIN).bc \
$(INFER_CREATE_TRACEVIEW_LINKS_BIN)
endif
.PHONY: byte
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
byte: $(INFER_BIN).bc
roots:=Infer
ifeq ($(IS_FACEBOOK_TREE),yes)
roots += $(INFER_CREATE_TRACEVIEW_LINKS_MODULE)
endif
clusters:=base clang java IR
ml_src_files:=$(shell find . -regex '\./[a-zA-Z].*\.ml\(i\)*')
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
inc_flags:=$(foreach dir,$(shell find . -type d),-I $(dir))
root_flags:=$(foreach root,$(roots),-r $(root))
cluster_flags:=$(foreach cluster,$(clusters),-c $(cluster))
mod_dep.dot: $(ml_src_files)
$(MAKE) -C $(DEPENDENCIES_DIR)/ocamldot
ocamldep.opt $(inc_flags) $(ml_src_files) \
| $(DEPENDENCIES_DIR)/ocamldot/ocamldot $(cluster_flags) $(root_flags) \
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
| grep -v -e "\"IList\"\|\"Utils\"\|\"IStd\"\|\"Infertop\"" \
> mod_dep.dot
mod_dep.pdf: mod_dep.dot
dot -Tpdf -o mod_dep.pdf mod_dep.dot
.PHONY: dsort
dsort:
$(QUIET)ocamldep.opt -sort $(inc_flags) $(ml_src_files)
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
$(INFER_BUILD_DIR)/infertop.bc: $(SRC_DIR)/infertop.ml $(SRC_BUILD_COMMON) $(MAKEFILE_LIST)
jbuilder build $@
$(QUIET)touch $@
.PHONY: toplevel
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
toplevel: $(INFER_BUILD_DIR)/infertop.bc
.PHONY: checkCopyright
checkCopyright: $(CHECKCOPYRIGHT_BIN)
$(CHECKCOPYRIGHT_BIN): $(SRC_BUILD_COMMON) $(MAKEFILE_LIST)
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
jbuilder build $(INFER_BUILD_DIR)/scripts/$(CHECKCOPYRIGHT_MAIN).exe
$(INSTALL_PROGRAM) $(INFER_BUILD_DIR)/scripts/$(CHECKCOPYRIGHT_MAIN).exe $(CHECKCOPYRIGHT_BIN)
define gen_atdgen_rules
# generate files using atdgen
# parameters:
# 1. the .atd file to generate .ml{,i} files from, e.g. foo.atd
# 2. the base name of .ml{,i} files, e.g. foo
# 3. the type of files to generate: b, j, t, or v
$(2)_$(3).mli: $(1)
$(ATDGEN) -$(3) $$< -o $(2)
# the .ml depends on the corresponding .mli to avoid running atdgen
# twice during parallel builds
$(2)_$(3).ml: $(2)_$(3).mli
endef
$(foreach atd_type,j t,\
$(eval \
$(call gen_atdgen_rules,$(INFERPRINT_ATDGEN_STUB_ATD),$(INFERPRINT_ATDGEN_STUB_BASE),$(atd_type))))
$(foreach atd_type,j t,\
$(eval \
$(call gen_atdgen_rules,$(STACKTREE_ATDGEN_STUB_ATD),$(STACKTREE_ATDGEN_STUB_BASE),$(atd_type))))
# rebuild the artifacts of the AST files whenever they're upated in FCP
$(foreach atd_type,b j t v,\
$(eval \
$(call gen_atdgen_rules,$(CLANG_ATDGEN_STUB_ATD),$(CLANG_ATDGEN_STUB_BASE),$(atd_type))))
define mirror_fcp_file
$(CLANG_PLUGIN_MIRROR)/$(notdir $(1)): $(1)
$(INSTALL_DATA) $$< $$@
endef
$(foreach file, $(FCP_FILES_TO_MIRROR), $(eval $(call mirror_fcp_file,$(file))))
$(CLANG_BINIOU_DICT): $(CLANG_ATDGEN_STUB_ATD)
# overapproximation of the words we need in the biniou dictionary
# the long litany of symbols is [:punct:] minus "_-'"
tr -s '[*!"#\$%&\(\)\+,\\\.\/:;<=>\?@\[\\\\]^`\{|\}~[:space:]]' '\n' \
< $< \
| sort | uniq \
> $@
$(GENERATED_FROM_AUTOCONF): $(MAKEFILE_LIST)
TMPFILE=$$(mktemp $@.tmp.XXXX); \
INFER_GIT_COMMIT=$$(git --work-tree=$(ROOT_DIR) --git-dir=$(ROOT_DIR)/.git rev-parse --short HEAD || printf "unknown"); \
INFER_GIT_BRANCH=$$(git --work-tree=$(ROOT_DIR) --git-dir=$(ROOT_DIR)/.git rev-parse --abbrev-ref HEAD || printf "unknown"); \
sed \
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
-e 's|@EXTRA_CFLAGS[@]|$(EXTRA_CFLAGS)|g' \
-e 's|@INFER_MAJOR[@]|$(INFER_MAJOR)|g' \
-e 's|@INFER_MINOR[@]|$(INFER_MINOR)|g' \
-e 's|@INFER_PATCH[@]|$(INFER_PATCH)|g' \
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
-e 's|@IS_FACEBOOK_TREE[@]|$(IS_FACEBOOK_TREE)|g' \
-e 's|@IS_RELEASE_TREE[@]|$(IS_RELEASE_TREE)|g' \
-e "s|@INFER_GIT_COMMIT[@]|$$INFER_GIT_COMMIT|g" \
-e "s|@INFER_GIT_BRANCH[@]|$$INFER_GIT_BRANCH|g" \
-e "s|@BUILD_C_ANALYZERS[@]|$(BUILD_C_ANALYZERS)|g" \
-e "s|@BUILD_JAVA_ANALYZERS[@]|$(BUILD_JAVA_ANALYZERS)|g" \
-e "s|@BUILD_PYTHON_ANALYZERS[@]|$(BUILD_PYTHON_ANALYZERS)|g" \
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
-e "s|@OPAMSWITCH[@]|$(OPAMSWITCH)|g" \
-e "s|@XCODE_SELECT[@]|$(XCODE_SELECT)|g" \
-e "s|@INFER_MAN_LAST_MODIFIED[@]|$(INFER_MAN_LAST_MODIFIED)|g" \
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
$@.in > "$$TMPFILE"; \
cat "$$TMPFILE" > $@; \
$(REMOVE) "$$TMPFILE"
jbuild.common: jbuild.common.in
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
jbuild-workspace: jbuild-workspace.in
base/Version.ml: base/Version.ml.in
$(GENERATED_JBUILDS): jbuild.common
$(QUIET)cat $+ > $@
jbuild: jbuild.in
atd/jbuild: atd/jbuild.in
istd/jbuild: istd/jbuild.in
scripts/jbuild: scripts/jbuild.in
.PHONY: clean
clean:
$(REMOVE) $(INFER_TARGET)
$(REMOVE) toplevel.mlpack
$(REMOVE_DIR) $(BUILD_DIR)
$(REMOVE) $(ETC_DIR)/clang_ast.dict
$(REMOVE) $(GENERATED_FROM_AUTOCONF)
$(REMOVE) $(GENERATED_JBUILDS)
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
$(REMOVE) base/Version.ml.tmp.* jbuild.tmp.* jbuild-workspace.tmp.*
# be a bit more aggressive than needed with what we remove here so that stale binaries that
# only existed in previous versions get removed as well
[make] s/ocamlbuild/jbuilder/g Summary: Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds: ``` times in 10ms, ±differences measured in speedups, 4 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------| | byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 | | native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 | | byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 | | change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 | | change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 | | change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 | | change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 | | change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 | | change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 50 cores | | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys | |---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------| | byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 | | native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 | | byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 | #+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2 ``` Menu: 1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in some information at build-time (really, at configure time, but TODO), such as whether or not clang is enabled. 2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file 3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help. 4. jbuilder does not support subdirectories, so resort to listing all the source files in the generated jbuild (only source directories need to be manually listed in jbuild.in though). Still, the generated .merlin is wrong and makes merlin find source files in _build, so manually tune it to get good merlin support. We also lose some of merlin for unit tests as it cannot see their build artefacts anymore. 5. checkCopyright gets its own jbuild because it's standalone. Also, remove some deprecation warnings in checkCopyright due to the new version of Core from a while ago. 6. Drop less-used Makefile features (they had regressed anyway) such as building individual modules. Also, building mod_dep.pdf now takes all the source files available so they better build (before, it would only take the source files from the config, eg with or without clang) (that's pretty minor). 7. The toplevel is now built as a custom toplevel because that was easier. It should soon be even easier: https://github.com/janestreet/jbuilder/issues/210 8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about interface files without implementations. In particular, I did not try to migrate too much of the Makefile logic to jbuilder, more can be done in the future. Reviewed By: jberdine Differential Revision: D5573661 fbshipit-source-id: 4ca6d8f
7 years ago
$(REMOVE) $(BIN_DIR)/Infer* $(BIN_DIR)/infer-* $(INFER_BIN){,.bc,.exe} $(INFER_BIN_ALIASES) \
$(INFERUNIT_BIN) $(CHECKCOPYRIGHT_BIN)
$(REMOVE) $(INFER_CREATE_TRACEVIEW_LINKS_BIN)
$(REMOVE) atd/*_{j,t,v}.ml{,i} atd/clang_*
$(REMOVE) mod_dep.dot
$(REMOVE) mod_dep.pdf
.PHONY: fmt
fmt:
@$(MAKE) -C $(ROOT_DIR) fmt