Summary:
Change the documentation to refer to (upcoming) binary releases. Update the
scripts to treat .release differently: now we want to build clang and the
plugins even in release mode, as that's just the preparation for the release
tarball containing only binaries.
Reviewed By: mbouaziz
Differential Revision: D8235388
fbshipit-source-id: bfb4ae8
Summary:
Change the license of the source code from BSD + PATENTS to MIT.
Change `checkCopyright` to reflect the new license and learn some new file
types.
Generated with:
```
git grep BSD | xargs -n 1 ./scripts/checkCopyright -i
```
Reviewed By: jeremydubreil, mbouaziz, jberdine
Differential Revision: D8071249
fbshipit-source-id: 97ca23a
Summary:
Run with `SHELL = bash -e -u -o pipefail` to catch many kinds of failures. We
were silently failing during `make install` because of some missing escaping,
and the failure was hidden because it was happening inside a bash `for` loop.
This fixes the escaping issue and makes sure such issues will result in an
error as of now.
Also removes dangerous `find -exec` instances: `find` will `exit 0` event if
some commands failed.
Fixes#887
Reviewed By: mbouaziz
Differential Revision: D7569054
fbshipit-source-id: 542fe50
Summary: There have been many improvements and a new clang since the last release.
Reviewed By: dulmarod
Differential Revision: D7443622
fbshipit-source-id: 30d31c0
Summary:
Make dead code detection part of `make test` so that dead code stops creeping
in. It's only enabled if all the analysers are enabled and if this is a
facebook build, because the dead code detection will have false positives
otherwise.
Reviewed By: mbouaziz
Differential Revision: D6807395
fbshipit-source-id: ebbd835
Summary: Tuareg is only useful for emacs, and `opam install tuareg` fails if emacs is not found.
Reviewed By: mbouaziz
Differential Revision: D6098693
fbshipit-source-id: 167628a
Summary: Try to preserve the original backtrace. Introduce `reraise` in the global namespace.
Reviewed By: jberdine
Differential Revision: D5804121
fbshipit-source-id: 0947a47
Summary:
This simplifies the jbuild files: no need to list these files explicitly
anymore, nor to exclude them explicitly from the main `InferModules` library
(due to their different compilation flags).
Isolate common parts into jbuild.common do `cat`-based code inclusion into
jbuild files to factorize code.
Reviewed By: jberdine
Differential Revision: D5678328
fbshipit-source-id: 6d7d925
Summary:
Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds:
```
times in 10ms, ±differences measured in speedups, 4 cores
| | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys |
|-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------|
| byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 |
| native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 |
| byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 |
| change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 |
| change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 |
| change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 |
| change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 |
| change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 |
| change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 |
#+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2
50 cores
| | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys |
|---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------|
| byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 |
| native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 |
| byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 |
#+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2
```
Menu:
1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in
some information at build-time (really, at configure time, but TODO), such as
whether or not clang is enabled.
2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file
3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help.
4. jbuilder does not support subdirectories, so resort to listing all the
source files in the generated jbuild (only source directories need to be
manually listed in jbuild.in though). Still, the generated .merlin is wrong
and makes merlin find source files in _build, so manually tune it to get
good merlin support. We also lose some of merlin for unit tests as it
cannot see their build artefacts anymore.
5. checkCopyright gets its own jbuild because it's standalone. Also, remove
some deprecation warnings in checkCopyright due to the new version of Core from
a while ago.
6. Drop less-used Makefile features (they had regressed anyway) such as
building individual modules. Also, building mod_dep.pdf now takes all the
source files available so they better build (before, it would only take the
source files from the config, eg with or without clang) (that's pretty minor).
7. The toplevel is now built as a custom toplevel because that was easier. It
should soon be even easier: https://github.com/janestreet/jbuilder/issues/210
8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about
interface files without implementations.
In particular, I did not try to migrate too much of the Makefile logic to jbuilder,
more can be done in the future.
Reviewed By: jberdine
Differential Revision: D5573661
fbshipit-source-id: 4ca6d8f
Summary:
Conversion and reformat of infer source using ocamlformat
auto-formatting tool.
Current status:
- Because Reason does not handle docstrings, the output of the
conversion is not 'Warning 50'-clean, meaning that there are
docstrings with ambiguous placement. I'll need to manually fix
them just before landing.
Reviewed By: jvillard
Differential Revision: D5225546
fbshipit-source-id: 3bd2786
Summary:
Add support for converting without actually converting. To be used as
a landing pad for rebasing over the conversion.
Reviewed By: jvillard
Differential Revision: D5379967
fbshipit-source-id: 1bd932d
Summary: Tests rely on at least 4.04.1, and no harm in avoiding CVE-2017-9772.
Reviewed By: jeremydubreil
Differential Revision: D5334702
fbshipit-source-id: 2b9b7f1
Summary:
Useful for hacking on infer, and when eg the default opam switch changes and
one has to remember which development packages to install all over again
(merlin, etc.).
Reviewed By: mbouaziz
Differential Revision: D5328701
fbshipit-source-id: 7b7694e
Summary: This will be needed to generate man pages with an accurate date.
Reviewed By: jberdine, mbouaziz
Differential Revision: D4937498
fbshipit-source-id: b5ebd31
Summary:
This makes sure that one can run `./build-infer.sh` then `make`. Otherwise it's
not always clear what one should do to recompile infer, eg when `make` will
work and when `./build-infer.sh` should be used instead, in particular when the
user doesn't have opam configured for her terminal.
Reviewed By: jberdine
Differential Revision: D4698159
fbshipit-source-id: 5df8059
Summary: We had our own mechanism for saving `./configure` flags, which does not work if flags contain whitespace. It turns out that `./config.stats --config` is a thing though.
Reviewed By: mbouaziz
Differential Revision: D4642422
fbshipit-source-id: ae075ca
Summary:
This replaces the previous integration written in Python, which consisted in 1)
run the mvn command and parse its output to locate "directories containing
source files", 2) run on files named "*.java" in these directories. This meant
we had to run javac twice on each source file, and more importantly this
mechanism of finding source files was very fragile. In fact, I could not make
it work on several mvn projects I tried.
The new integration is based on parsing "pom.xml" to add an "infer-capture"
profile which instructs mvn to run `/path/to/infer` instead of `javac`. We also
add this profile to each maven submodule.
Users can specify an "infer-capture" profile themselves if the default one
doesn't work; in that case we don't inject our own "infer-capture" profile.
Reviewed By: jeremydubreil
Differential Revision: D4409613
fbshipit-source-id: d664274
Summary:
Version 0.29.1_1 of pkg-config has been known to cause compiling infer to fail.
Warn users at ./configure time.
Reviewed By: jberdine
Differential Revision: D4422774
fbshipit-source-id: bce5733
Summary:
This will make it easier to bisect on top of this commit, as values in
Makefile.autoconf.in are not expected to change across commits, but
Makefile.config may fluctuate.
This should also make it easier to rebase stacks of diffs without having
to rerun `./autogen.sh && ./configure`.
Reviewed By: jberdine
Differential Revision: D4410077
fbshipit-source-id: 1119fb6
Summary:
This removes support for developing infer using Eclipse. If you use Eclipse,
consider using Atom/Emacs/vim instead, which have good OCaml/Reason support.
This allows us to get rid of a couple quirks:
- do not generated ocaml annots (this is very slow)
- move OCaml _build directory to infer/src/ where it makes more sense
Reviewed By: jberdine
Differential Revision: D4319480
fbshipit-source-id: 6f063fc
Summary: Only run the buck (and ant) tests if the tools can be found at ./configure-time.
Reviewed By: jberdine
Differential Revision: D4167586
fbshipit-source-id: e77b736
Summary:
Our patch to Javalib has been accepted, so we can parse programs with invokedynamic!
invokedynamic still crashes Sawja, but I have worked around this by replacing all invokedynamic's with invokestatic's before passing them to Sawja.
This means we can handle everything about invokedynamic except calling the correct function (I call a dummy function with the correct signature for now).
We can try to actually call the right method in the future.
Reviewed By: jvillard
Differential Revision: D4160384
fbshipit-source-id: a8ef4e1
Summary: Introduce `--enable-ocamlopt-custom-cc` configure flag (disabled by default). Normally it doesn't have to be set. However, when cross-compiling infer itself for another platform it may have to be set.
Reviewed By: jberdine
Differential Revision: D3995032
fbshipit-source-id: ce2fd72
Jules Villard
Daiva Naudziuniene
Sam Blackshear
Josh Berdine
Jeremy Dubreil
Dulma Churchill
Andrzej Kotulski