Summary:
The past issue with ppx_compare on nonrec types has (at some point) been fixed.
Greped for `let compare = compare` and removed the workaround for `nonrec`.
Reviewed By: jberdine
Differential Revision: D21973087
fbshipit-source-id: 5e2043e20
Summary:
The past issue with ppx_compare on nonrec types has (at some point)
been fixed. Cf. https://github.com/janestreet/ppx_compare/issues/2
Reviewed By: ngorogiannis
Differential Revision: D21961645
fbshipit-source-id: de03a60a4
Summary:
It has no dependencies on the rest of the sledge codebase and might be
more generally useful.
Reviewed By: jvillard
Differential Revision: D21720980
fbshipit-source-id: b4f061e73
Summary:
Now that the frontend translates LLVM's undef to nondet instructions,
not expressions, Nondet in Exp and Term are not needed.
Reviewed By: jvillard
Differential Revision: D21720969
fbshipit-source-id: e8acaf432
Summary:
Instead of relying on Exp.nondet to encode the semantics of LLVM's
undef, translate each to a per-function unique register, with a nondet
assignment to it prior to each use. This avoids the need for
Exp.nondet, which is ill-formed in the sense that expressions denote
values, not sets of values (with particular constraints on what ways
in which the choice must be angelic vs demonic). This change
essentially allows the backend to be sane, and makes it the frontend's
problem to deal with LLVM's undef.
This treatment, like the treatment based on Exp.nondet, is expected to
result in LLAIR code with different semantics of undef compared to the
semantics of LLVM described in the
[LangRef](https://llvm.org/docs/LangRef.html#undefined-values). In
particular, the LLVM LangRef states
> An ‘undef’ “variable” can arbitrarily change its value over its
> “live range”. This is true because the variable doesn’t actually
> have a live range. Instead, the value is logically read from
> arbitrary registers that happen to be around when needed, so the
> value is not necessarily consistent over time.
To model this ability of undef to arbitrarily change its value over
its live range, it is likely that additional nondet assignments would
need to be added. Exactly where it not currently known.
Reviewed By: jvillard
Differential Revision: D21720976
fbshipit-source-id: 90c2a0d26
Summary:
Refactor frontend translation of LLVM values, opcodes, etc. to support
emitting not only a LLAIR expression, but also a sequence of
instructions to be prefixed onto the uses of the resulting expression.
This is currently unused, as all prefixes are empty. Later, it will be
used to translate e.g. `undef` to `r := nondet(); r`.
Reviewed By: jvillard
Differential Revision: D21720972
fbshipit-source-id: b89bb57de
Summary:
Refer to Llair modules using `Llair.` qualifier, except for in
`Frontend`, which makes so much use of `Llair` that it is now opened
(`Llair` only contains types and modules, so `open` is safe).
Reviewed By: jvillard
Differential Revision: D21720979
fbshipit-source-id: dd42075d9
Summary:
The term representing an exp should not rely on more info than is
carried by the exp.
Reviewed By: jvillard
Differential Revision: D21720989
fbshipit-source-id: b65bf3678
Summary:
It is now possible to not spew dune files all over the repo, and opam
files aren't needed either.
Reviewed By: jvillard
Differential Revision: D21720978
fbshipit-source-id: 553e1d154
Summary:
```
val ( let@ ) : ('a -> 'b) -> 'a -> 'b
(** [let@ x = e in b] is equivalent to [e @@ fun x -> b], that is,
[e (fun x -> b)] *)
```
Reviewed By: jvillard
Differential Revision: D21721025
fbshipit-source-id: d8efdebbe
Summary: Cost analysis has an additional mode that checks whether the function occurs on a UI (main) thread. If so, it warns the user. This check is only supported for Java and C++ but not for ObjC, so the diff suppresses this check for ObjC, and set ```is_on_ui_thread``` to ```false``` by default.
Reviewed By: ezgicicek
Differential Revision: D21952470
fbshipit-source-id: 838dd5639
Summary:
Due to:
1. Additional dependency on kotlin-annotations,
2. nullsafe annotation being annotated as TypeQualifierDefault and
UnderMigration(status = STRICT) [which can have breaking effect on
Kotlin code],
let's bump the minor version of the artifact.
Pull Request resolved: https://github.com/facebook/infer/pull/1281
Reviewed By: jvillard
Differential Revision: D21952759
Pulled By: artempyanykh
fbshipit-source-id: 58aea14c3
Summary:
There was an issue on `make build_ant_test` that newly generated `issues.exp.test` is empty. When
infer runs with `-- ant`, if there is already built objects in `ant_out`, infer analyzes nothing,
which result in the empty `issues.exp.test`. For example,
```
~/infer/infer/tests/build_systems/ant$ make test
[11:26:49][36924] Testing ant integration...
[ 2s][36924] SUCCESS Testing ant integration
~/infer/infer/tests/build_systems/ant$ touch `which infer`
```
The makefile tries to reanalyze ant targets because `infer` binary has been changed. However, there
is nothing to build/analyze, since `ant_out` still exists as the same.
```
~/infer/infer/tests/build_systems/ant$ make test
[11:26:57][37078] Testing ant integration...
[ 1s][37078] SUCCESS Testing ant integration
diff --git a/Users/scho/infer/infer/tests/build_systems/ant/issues.exp b/Users/scho/infer/infer/tests/build_systems/ant/issues.exp.test
index 376146b5f..e69de29bb 100644
--- a/Users/scho/infer/infer/tests/build_systems/ant/issues.exp
+++ b/Users/scho/infer/infer/tests/build_systems/ant/issues.exp.test
@@ -1 +0,0 @@
[-build_systems/ant/src/Hello.java, Hello.test():int, 2, NULL_DEREFERENCE, no_bucket, ERROR, [start of procedure test()]-]
Test output (build_systems/ant/issues.exp.test) differs from expected test output build_systems/ant/issues.exp
Run the following command to replace the expected test output with the new output:
make -C build_systems/ant replace
make: *** [test] Error 1
```
To handle this issue, this cleans `ant_out` before running infer.
Reviewed By: jvillard
Differential Revision: D21950916
fbshipit-source-id: f57056f6e
Summary:
These files have started appearing in `git status` on my laptop (emacs
26.3).
Reviewed By: ezgicicek
Differential Revision: D21928308
fbshipit-source-id: f63a21493
Summary:
Before: to report an issue type, wrap it in an exception type then pass
that around and translate it back to an issue type at some point.
After: no. Except biabduction, which was built like this and uses
raising of exceptions to stop the analysis too.
Reviewed By: dulmarod
Differential Revision: D21904589
fbshipit-source-id: cb8446f38
Summary:
See previous diff: issues are always reported with the same severity so
recognise that and just use their default severity in "modern" checkers.
Reviewed By: ngorogiannis
Differential Revision: D21904591
fbshipit-source-id: fb5387e35
Summary:
By and large issues of a given type (eg NULL_DEREFERENCE) are always
reported with the same severity (eg ERROR), but that severity is hard to
tease out from the code. This makes it more explicit by favouring the
default in `IssueType.t` in many cases without changing infer's
behaviour. The checkers typically use `Reporting.log_{error,warning}`;
these are taken care of in the next diff.
Reviewed By: skcho
Differential Revision: D21904590
fbshipit-source-id: 47c76cd4c
Summary:
- "visibility" (whether an issue to report is something to show the user
or something that is only used for debugging or for detecting other
issues) is an intrinsic property of an issue type and thus belongs in
`IssueType.t`.
- "severity" (warning/error/...) is something that each issue should
have a default for ("a memory leak is by default an ERROR", a
"condition always true is by default a warning"), but can also be
overriden at run-time. Right now only nullsafe uses that capability:
when in "strict mode", some warnings become errors. We can imagine
extending this to other issue types, or even providing config flags to
turn warnings into errors, like compilers often have.
To guess the default severity (since it's dynamic it can be hard to know
for sure!), I tried to find places where it was reported as the source
of truth, but also later diffs test these defaults against our tests (by
removing most of the dynamic changes in severity).
With this diff there are 3 places where severity is set:
1. The default severity in IssueType.t: this is unused for now.
2. The severity from `Exceptions.recognize_exception`: this is
semi-statically determined and, if set, takes precedence over number 3 (which looks wrong to me!)
3. The severity passed to `Errlog.log_issue` when we actually add an
issue to the error log: this is used only when (2) is unset.
The next diffs will make 1 the default, delete 2, and make 3 optional
but override 1 when passed.
Reviewed By: skcho
Differential Revision: D21904538
fbshipit-source-id: a674b42d8
Summary:
The Java frontend translates java field accesses on an object reference as field (`.`) followed by dereference (`*`) exactly like the arrow operator in C. However, when the field is static, it generates just a field access `.`. This is a bug.
This diff mitigates its effects for printing locks in starvation.
Reviewed By: skcho
Differential Revision: D21882875
fbshipit-source-id: 79846d826
Summary:
Rather than compute the size of the llair type of the llair
initializer expression, compute the size of the llvm initializer
directly.
Reviewed By: ngorogiannis
Differential Revision: D21720982
fbshipit-source-id: 4364baf38
Summary:
Rather than translate an llvm type to a llair one and then compute the
size of the llair type, obtain the size of the llvm type directly.
Reviewed By: ngorogiannis
Differential Revision: D21720968
fbshipit-source-id: ad98112a7
Summary:
This diff implements part of the memory management for Objective-C classes in ARC, namely that `dealloc` is called when the objects become unreachable. In reality the semantics of ARC says that this happens when their reference count becomes 0, but we are not modelling this yet in Pulse. However, we could in the future.
This fixes false positives memory leaks when the memory is freed in dealloc.
`dealloc` is often implicit in Objective-C, it also calls the dealloc of instance variables and superclass. None of this is implemented yet, and will be done in a future diff. This will be added in the frontend probably, similarly to how it's done for C++ destructors.
This is an important part of modelling Objective-C semantics in Infer, I looked at whether this should be a preanalysis to be used by all analyses but this needs Pulse. So the idea is that any analysis that needs to understand Objective-C memory model well, should have Pulse as a preanalysis.
Reviewed By: jvillard
Differential Revision: D21762292
fbshipit-source-id: ced014324
Summary:
Adding a new attribute for dynamic type. It is set in the models of constructors, currently only in `alloc` in Objective-C. We use it in the following diff to figure out which `dealloc` method to call. However it could be useful for other things, such as dynamic dispatch.
#skipdeadcode
Reviewed By: jvillard
Differential Revision: D21739928
fbshipit-source-id: 9276c0a4d
Ezgi Çiçek
Josh Berdine
Qianyi Shu
Artem Pyanykh
Sungkeun Cho
Jules Villard
Nikos Gorogiannis
Dulma Churchill