Summary:
Use an SQLite database to store proc attributes, instead of files on disk.
Wrap SQLite operations in two layers:
1. `SqliteUtils` provides helper functions to make sure DB operations succeed
2. `KeyValue` provides a functor to expose a simple and type-safe key/value store backed by the SQLite DB.
Reviewed By: jberdine
Differential Revision: D5640053
fbshipit-source-id: 31050e5
Summary:
This simplifies the jbuild files: no need to list these files explicitly
anymore, nor to exclude them explicitly from the main `InferModules` library
(due to their different compilation flags).
Isolate common parts into jbuild.common do `cat`-based code inclusion into
jbuild files to factorize code.
Reviewed By: jberdine
Differential Revision: D5678328
fbshipit-source-id: 6d7d925
Summary:
Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds:
```
times in 10ms, ±differences measured in speedups, 4 cores
| | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys |
|-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------|
| byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 |
| native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 |
| byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 |
| change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 |
| change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 |
| change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 |
| change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 |
| change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 |
| change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 |
#+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2
50 cores
| | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys |
|---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------|
| byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 |
| native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 |
| byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 |
#+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2
```
Menu:
1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in
some information at build-time (really, at configure time, but TODO), such as
whether or not clang is enabled.
2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file
3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help.
4. jbuilder does not support subdirectories, so resort to listing all the
source files in the generated jbuild (only source directories need to be
manually listed in jbuild.in though). Still, the generated .merlin is wrong
and makes merlin find source files in _build, so manually tune it to get
good merlin support. We also lose some of merlin for unit tests as it
cannot see their build artefacts anymore.
5. checkCopyright gets its own jbuild because it's standalone. Also, remove
some deprecation warnings in checkCopyright due to the new version of Core from
a while ago.
6. Drop less-used Makefile features (they had regressed anyway) such as
building individual modules. Also, building mod_dep.pdf now takes all the
source files available so they better build (before, it would only take the
source files from the config, eg with or without clang) (that's pretty minor).
7. The toplevel is now built as a custom toplevel because that was easier. It
should soon be even easier: https://github.com/janestreet/jbuilder/issues/210
8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about
interface files without implementations.
In particular, I did not try to migrate too much of the Makefile logic to jbuilder,
more can be done in the future.
Reviewed By: jberdine
Differential Revision: D5573661
fbshipit-source-id: 4ca6d8f
Summary:
Glorious, glorious man pages.
This changes a bunch of things that were hard to break up from the diff, so the
resulting diff is big.
Use `Cmdliner.Manpage` to format man pages (and also format a bit ourselves
since it is so stubborn).
As a bonus, introduce the following subcommands:
```
infer run ... # same as default mode with -- before
infer capture ... # -a capture
infer compile ... # -a compile
infer analyze ... # InferAnalyze
infer report ... # InferPrint
infer diff ... # this one is not new
infer clang ... # InferClang, not that you should use it
```
The man pages can still be improved a lot. Notable missing sections:
`ENVIRONMENT`, stuff about .inferconfig, some example usage, `DESCRIPTION`, ...
Reviewed By: jberdine
Differential Revision: D4921083
fbshipit-source-id: 9602230
Summary:
We won't be needing to know the terminal size when we move the help to
manpages. Hopefully if we need C stubs again in the future we can refer back to
this diff to revive them.
Reviewed By: jberdine
Differential Revision: D4937491
fbshipit-source-id: 99139fa
Summary:
This debugger stops the execution of CTL during the evaluation of formulas, then shows useful info about the current state:
- Which formula is being evaluated
- In which part of the AST is such formula being evaluated
- Line number of the source file
- Whether a CTL-Transition will take place or not
- Node-ID that can be related to the dotty file containing the evaluation graph (the one in infer-out/lint_dotty/)
The AST is shown with coloured nodes, where each colour has the following meaning:
- [Default terminal colour], Bold: The node is being evaluated
- Green, Bold: The formula returned true on the current node
- Red, Bold: The formula returned false on the current node
Reviewed By: ddino
Differential Revision: D4834451
fbshipit-source-id: c9aa970
Summary:
This removes the dependency of libffi, and gives better guarantees at
compile-time. A bit overkill to retrieve the width of the terminal but what do
you know...
Reviewed By: jberdine
Differential Revision: D4700003
fbshipit-source-id: 036989b
Summary:
This replaces the previous integration written in Python, which consisted in 1)
run the mvn command and parse its output to locate "directories containing
source files", 2) run on files named "*.java" in these directories. This meant
we had to run javac twice on each source file, and more importantly this
mechanism of finding source files was very fragile. In fact, I could not make
it work on several mvn projects I tried.
The new integration is based on parsing "pom.xml" to add an "infer-capture"
profile which instructs mvn to run `/path/to/infer` instead of `javac`. We also
add this profile to each maven submodule.
Users can specify an "infer-capture" profile themselves if the default one
doesn't work; in that case we don't inject our own "infer-capture" profile.
Reviewed By: jeremydubreil
Differential Revision: D4409613
fbshipit-source-id: d664274
Summary:
This diff adds a dependency on ctypes.foreign and uses the example
binding of fts to implement remove_directory_tree.
Reviewed By: yunxing
Differential Revision: D4115569
fbshipit-source-id: 3509955
Summary: Make it possible to run infer code from within `ocaml`/`utop`. Integration is really basic, but we can extend it if we find it useful.
Reviewed By: jberdine
Differential Revision: D3736029
fbshipit-source-id: 4cebb7c
Jules Villard
Martino Luca
Josh Berdine
Yunxing Dai
Andrzej Kotulski