Summary: There is no need to model anything, Pulse is able to catch nil insertion into NSDictionary literals because the frontend dereferences keys and values during the translation of NSDictionary literals
Reviewed By: jvillard
Differential Revision: D28383176
fbshipit-source-id: 01a064daf
Summary:
The order was reversed when printing the trace, leading to confusion.
Also make sure we indicate which part of the trace we are printing when
there is more than one part (either context + access or invalidation +
access, or all three).
Also start nesting at <calling context length> to better represent the
role of the calling context visually.
Reviewed By: da319
Differential Revision: D28329263
fbshipit-source-id: b691fb1f4
Summary:
`mutableDictionary[key] = value`, crashes if key is nil, however, if value is nil, any object corresponding to a key will be removed from the dictionary.
Under the hood, `NSMutableDictionary.setObject:forKeyedSubscript:` is called by `mutableDictionary[key] = value`.
Reviewed By: ezgicicek
Differential Revision: D28288789
fbshipit-source-id: e4e1c4288
Summary:
When garbage-collecting addresses we would also remove their attributes.
But even though the addresses are no longer allocated in the heap, they
might show up in the formula and so we need to remember facts about
them.
This forces us to detect leaks closer to the point where addresses are
deleted from the heap, in AbductiveDomain.ml. This is a nice refactoring
in itself: doing so fixes some other FNs where we sometimes missed leak
detection on dead addresses.
This also makes it unecessary to simplify InstanceOf eagerly when
variables get out of scope.
Some new {folly,std}::optionals false positives that either are similar to existing ones or involve unmodelled smart pointers.
Reviewed By: da319
Differential Revision: D28126103
fbshipit-source-id: e3a903282
Summary:
Warn if either an object or a key is nil for NSMutableDictionary setObject:forKey:.
Next steps: introduce new special issue type and model more collections
Reviewed By: ezgicicek
Differential Revision: D28189382
fbshipit-source-id: 1697829ee
Summary:
As explained in the previous diff: when the access trace goes through
the invalidation step there is no need to print the invalidation trace
at all.
Note: only a few sources of invalidation are handled at the moment. The
following diffs gradually fix the other sources of invalidation.
Reviewed By: skcho
Differential Revision: D28098335
fbshipit-source-id: 5a5e6481e
Summary:
The eventual goal is to stop having separate sections of the trace
("invalidation part" + "access part") when the "access part" already
goes through the invalidation step. For this, it needs to record when a
value is made invalid along the path.
This is also important for assignements to NULL/0/nullptr/nil: right now
the way we record that 0 is not a valid address is via an attribute
attached to the abstract value that corresponds to 0. This makes traces
inconsistent sometimes: 0 can appear in many places in the same function
and we won't necessarily pick the correct one. In other words, attaching
traces to *values* is fragile, as the same value can be produced in many
ways. On the other hand, histories are stored at the point of access, eg
x->f, so have a much better chance of being correct. See added test:
right now its traces is completely wrong and makes the 0 in `if
(utf16StringLen == 0)` the source of the NULL value instead of the
return of `malloc()`!
This diff makes the traces slightly more verbose for now but this is
fixed in a following diff as the traces that got longer are those that
don't actually need an "invalidation" trace.
Reviewed By: skcho
Differential Revision: D28098337
fbshipit-source-id: e17929259
Summary: Added a new issue type for sending a message to nil when its return type is non-POD. To distinguish these issues from other nullptr dereference issues, we extend the `MustBeValid` attribute to contain the reason of why an address must be valid. For now a reason can only have `SelfOfNonPODReturnMethod` as it's value, but in the future we will use it for other nullability issue types, such as nil insertion into collections.
Reviewed By: jvillard
Differential Revision: D27762333
fbshipit-source-id: 689e5a431
Summary: To support objc nil messaging for unknown function calls we prune `self` to be positive in the `normal` specification and add additional specification to handle nil case.
Reviewed By: skcho
Differential Revision: D27360757
fbshipit-source-id: 119999b30
Summary:
Adapting error messages in Pulse so that they become more intuitive for
developers.
Reviewed By: jvillard
Differential Revision: D26887140
fbshipit-source-id: 896970ba2
Summary: In ObjC, when a method is called on nil, there is no NPE, the method is actually not called and the return value is 0/false/nil. There is an exception in the case where the return type is non-POD. In that case it's UB and we want to report an error.
Reviewed By: jvillard
Differential Revision: D26815687
fbshipit-source-id: 8126414ab
Summary: We were missing a part of the trace if it was going through a nil summary as the invalidation was set in the nil summary. Instead of creating a fresh value for return in the nil summary {self=0}{return=0}, we return self {self=0}{return=self}. This way we keep all the information about invalidation in the trace.
Reviewed By: jvillard
Differential Revision: D26871098
fbshipit-source-id: 6eb175e68
Summary: When a method is called in ObjC on nil, there is no NPE, the method is actually not called and the return value is 0/false/nil. (There is an exception in the case where the return type is non-POD. In that case it's UB. This will be addressed later). To implement this behaviour we add additional summary to ObjC instance methods {self = 0} {return = 0}. We also want to make sure that inferred summary will not be used in we call a method on nil, hence, we add a path condition {self > 0} to get a contradiction when needed.
Reviewed By: jvillard
Differential Revision: D26664187
fbshipit-source-id: cdac2a5bb
Summary: Added some basic examples for Objective-C we want to address next in pulse nullptr dereference analysis. In particular, we should not get a `nil` dereference error when we call a method on `nil`, except if the method returns a non-POD (Plain Old Data) type.
Reviewed By: ezgicicek
Differential Revision: D26053402
fbshipit-source-id: 66f4600c3
Summary: We model internal builtin `__new` function to return a non-null value. This fixes nullptr_dereference false positives where we explicitly check the result of a function call for nullptr when the function returns a newly created object.
Reviewed By: jvillard
Differential Revision: D22772217
fbshipit-source-id: 37d209697
Summary: The new memory leaks analysis is now ready to be enabled by default and turned on in production. This also replaces the biabduction one which is now disabled.
Reviewed By: jvillard
Differential Revision: D21998666
fbshipit-source-id: 9cd95e894
Summary:
This function had been computing the name for ObjC methods wrong, with only the class name. This was causing wrong error messages in Pulse.
The main issue was that `Procname.to_simplified_string` was writing `Classname::methodname` for ObjC methods, which is not the convention. This confused the `hashable_name` funtion. So changing the method name to `Classname.methodname` which is more standard, and this also fixes `hashable_name`.
Reviewed By: ngorogiannis, jvillard
Differential Revision: D21570880
fbshipit-source-id: 13ed62cf8
Summary:
Just like `CFBridgingRelease` we want to be able to model functions that are specific to a given codebase that make a transfer of memory ownership so that developers don't need to worry about releasing that memory anymore, and hence, we don't want to report leaks on that memory.
Things get a little more complicated, because some of the functions we want to model are in a specific namespace, so with this flag we take both cases into account, when we are dealing with namespaces or not.
Reviewed By: jvillard
Differential Revision: D21404409
fbshipit-source-id: c36bd7afc
Summary:
bigmacro_bender
There are 3 ways pulse tracks history. This is at least one too many. So
far, we have:
1. "histories": a humble list of "events" like "assigned here", "returned from call", ...
2. "interproc actions": a structured nesting of calls with a final "action", eg "f calls g calls h which does blah"
3. "traces", which combine one history with one interproc action
This diff gets rid of interproc actions and makes histories include
"nested" callee histories too. This allows pulse to track and display
how a value got assigned across function calls.
Traces are now more powerful and interleave histories and interproc
actions. This allows pulse to track how a value is fed into an action,
for instance performed in callee, which itself creates some more
(potentially now interprocedural) history before going to the next step
of the action (either another call or the action itself).
This gives much better traces, and some examples are added to showcase
this.
There are a lot of changes when applying summaries to keep track of
histories more accurately than was done before, but also a few
simplifications that give additional evidence that this is the right
concept.
Reviewed By: skcho
Differential Revision: D17908942
fbshipit-source-id: 3b62eaf78
Summary:
Unfortunately it is very hard to predict when
`Typ.Procname.describe` will add `()` after the function name, so we
cannot make sure it is always there.
Right now we report clowny stuff like "error while calling `foo()()`",
which this change fixes.
Reviewed By: ezgicicek
Differential Revision: D17665470
fbshipit-source-id: ef290d9c0
Summary: This shows that the current Pulse analyzer works fine in the C++ part of the Objc++ files.
Reviewed By: martintrojer
Differential Revision: D17225683
fbshipit-source-id: faf51c5fa
Daiva Naudziuniene
Jules Villard
Gabriela Cunha Sampaio
Dulma Churchill