Summary:
This gives additional information to users. For instance:
```
--biabduction
Activates: the separation logic based bi-abduction analysis using
the checkers framework (Conversely: --no-biabduction)
This option is relevant to infer-analyze(1).
```
Reviewed By: sblackshear
Differential Revision: D5583197
fbshipit-source-id: 2960b90
Summary:
We previously lumped ownership predicates in with all other predicates. That limited us to a flat ownership domain.
This diff separates out the ownership predicates so we can have a richer lattice of predicates with each access path.
This lets us be more precise; for example, we can now show that
```
needToOwnBothParams(Obj o1, Obj o2) {
Obj alias;
if (*) { alias = o1; } else { alias = o2; }
alias.f = ... // both o1 and o2 need to be owned for this to be safe
}
void ownBothParamsOk() {
needToOwnBothParams(new Obj(), new Obj()); // ok, would have complained before
}
```
is safe.
Reviewed By: jberdine
Differential Revision: D5589898
fbshipit-source-id: 9606a46
Summary:
This makes it easier to test a single checker.
Also refactor the code to make it harder to mess up the list of default/all checkers.
Reviewed By: sblackshear
Differential Revision: D5583209
fbshipit-source-id: 7c919b2
Summary:
This makes the CLI more complete: before, it was often impossible to "go back"
once some options were passed, namely options produced by `mk_*_{list,opt}`.
Now these automatically create an accompanying `--<long>-reset` option that
resets the config variable to its default value.
Also unify our naming of `~meta` arguments:
- no more spaces in them (except one instance where it's a whole sentence)
- use `+foo` if `foo` can be specified multiple times
Reviewed By: dulmarod
Differential Revision: D5583187
fbshipit-source-id: a8c2567
Summary: This takes several seconds and is better tested in parallel with the other tests instead of at the end.
Reviewed By: mbouaziz
Differential Revision: D5591774
fbshipit-source-id: f474cae
Summary:
Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds:
```
times in 10ms, ±differences measured in speedups, 4 cores
| | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys |
|-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------|
| byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 |
| native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 |
| byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 |
| change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 |
| change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 |
| change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 |
| change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 |
| change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 |
| change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 |
#+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2
50 cores
| | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys |
|---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------|
| byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 |
| native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 |
| byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 |
#+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2
```
Menu:
1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in
some information at build-time (really, at configure time, but TODO), such as
whether or not clang is enabled.
2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file
3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help.
4. jbuilder does not support subdirectories, so resort to listing all the
source files in the generated jbuild (only source directories need to be
manually listed in jbuild.in though). Still, the generated .merlin is wrong
and makes merlin find source files in _build, so manually tune it to get
good merlin support. We also lose some of merlin for unit tests as it
cannot see their build artefacts anymore.
5. checkCopyright gets its own jbuild because it's standalone. Also, remove
some deprecation warnings in checkCopyright due to the new version of Core from
a while ago.
6. Drop less-used Makefile features (they had regressed anyway) such as
building individual modules. Also, building mod_dep.pdf now takes all the
source files available so they better build (before, it would only take the
source files from the config, eg with or without clang) (that's pretty minor).
7. The toplevel is now built as a custom toplevel because that was easier. It
should soon be even easier: https://github.com/janestreet/jbuilder/issues/210
8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about
interface files without implementations.
In particular, I did not try to migrate too much of the Makefile logic to jbuilder,
more can be done in the future.
Reviewed By: jberdine
Differential Revision: D5573661
fbshipit-source-id: 4ca6d8f
Summary: `make opam.lock` shows that we can get rid of some more packages (perhaps leftovers from reason?).
Reviewed By: jberdine
Differential Revision: D5573505
fbshipit-source-id: 8b41152
Summary:
The only path to the `MergeCaptured.slink` function is when we should merge, so
it doesn't make sense to check `Config.merge` again. In the case of `infer run
--flavors -- buck ...`, this would create regular symlinks instead of the much
faster multilinks.
Reviewed By: jberdine
Differential Revision: D5574020
fbshipit-source-id: df710ca
Summary:
Fix for the #669. Recursion problem has been reproduced (see the new doctest in the latest commit) and eliminated. I guess the new version will work faster too (no more unnecessary slicing).
Closes https://github.com/facebook/infer/pull/697
Reviewed By: sblackshear
Differential Revision: D5507925
Pulled By: jvillard
fbshipit-source-id: 21fa07b
Summary:
This is a needed step in the direction of making prenalysis functional: it will return a view of the CFG rather than mutating the CFG.
ProcCfg already works by providing a view on the underyling CFG, but the bi-abduction can't leverage this because it uses the "raw" CFG.
This diff does a partial swap of the raw CFG for an exceptional ProcCfg. The goal is to make sure the bi-abduction never calls `Procdesc.get_instrs`; it should use the `ProcCfg` wrapper instead.
That way, preanalyses that add instructions (like the liveness prenalysis) will work.
There's still some calls to `Procdesc.get_succs` etc., but we can remove those in a future diff.
They're not on the critical path because the current preanalyses only add instructions, not nodes or edges.
Reviewed By: jeremydubreil
Differential Revision: D5556387
fbshipit-source-id: 4ffda00
Summary:
Previous version was hard to understand because it was doing many things within same code. New version has different code for Arrays, Structs and others.
There is some copy-paste, but it's easier to follow code (open to suggestions though)
Reviewed By: dulmarod
Differential Revision: D5547999
fbshipit-source-id: 77ecb24
Summary: It wasn't using code from `std::vector::empty` which recently was improved. Instead of inlining `std::vector::empty`, call it to know whether vector is empty or not.
Reviewed By: jvillard
Differential Revision: D5573379
fbshipit-source-id: e024a42
Summary: Useful for identifying user-controlled array accesses that could lead to buffer overflows
Reviewed By: mbouaziz
Differential Revision: D5520985
fbshipit-source-id: 92984f6
Summary:
When a sink name is specified in `.inferconfig` or in OCaml, it might conflict with a function of the same name that has a different number of args.
We shouldn't try to create a sink in this case, and we definitely shouldn't crash.
Reviewed By: jeremydubreil
Differential Revision: D5561216
fbshipit-source-id: fa1859b
Summary: This is unused, as far as I can tell. If we want to revive it, we can do it in AL or as a simple checker; it certainly doesn't require the full might of bi-abduction.
Reviewed By: jeremydubreil
Differential Revision: D5556325
fbshipit-source-id: e3895c2
Summary:
Replace `inferTraceBugs` with `infer-explore` with a similar CLI. Some options changed:
- --max-level -> --max-nesting, and "max" is the default value instead of a possible value
- --no-source -> --no-source-preview
Reviewed By: mbouaziz
Differential Revision: D5526651
fbshipit-source-id: 8383f37
Summary:
In some cases we normalize expressions to check some facts about them. In these
cases, trying to keep as much information as possible in the expression, such
as the fact it comes from a `sizeof()` expression, is not needed. Doing
destructive normalization allows us to replace `sizeof()` by its
statically-known value.
closes#706
Reviewed By: mbouaziz
Differential Revision: D5536685
fbshipit-source-id: cc3d731
Summary: A temporary workaround until we can understand why this happens and fix it.
Reviewed By: jeremydubreil
Differential Revision: D5559838
fbshipit-source-id: dc86eb9
Summary: That was too noisy. Propagate `--quiet` to the Python reporting hook so as to still emit bugs.txt and so on.
Reviewed By: martinoluca
Differential Revision: D5501106
fbshipit-source-id: 63b6451
Summary:
This allows the user to specify a different command to build the current version of the project vs to build the previous version of the project. Here's an example:
```
infer diff --gen-previous-build-command-script "echo clang -c hello.c" ... -- clang -c hello2.c
```
By default the two build commands are the same. If the script is to be used for both the current and the previous versions, then it's on the user to run it once first, eg:
```
infer diff --gen-previous-build-command-script "./myscript.sh previous" ... -- $(./myscript.sh current)
```
Reviewed By: martinoluca
Differential Revision: D5500989
fbshipit-source-id: 7374b44
Summary: Working on making CFG immutable by killing refs to functions that mutate them. This is an easy one because it doesn't do anything :).
Reviewed By: jeremydubreil, mbouaziz
Differential Revision: D5551521
fbshipit-source-id: bec76a9
Summary:
Record the list of access paths (if any) used in the index expression for each array access.
This will make it possible to use array accesses as sinks in Quandary
Reviewed By: jeremydubreil
Differential Revision: D5531356
fbshipit-source-id: 8204909
Summary:
Do not use the deprecated (and slower) `#infer` flavor. Instead, `infer-run`
runs capture with the `#infer-capture-all` flavor, followed by merging targets,
followed by the analysis.
Move the call to `MergeCapture` around to make this change easier.
Reviewed By: mbouaziz
Differential Revision: D5547199
fbshipit-source-id: 53c9996
Summary:
With current model, there are issues with cxx range loop. It looks like
it comes from std::vector::size model.
example of such FP:
```
int t = vec.size();
for(auto& elem : vec) {
auto x = elem
}
```
Reviewed By: jvillard
Differential Revision: D5545914
fbshipit-source-id: fbe55b3
Summary: Those are not particularly relevant for the biabduction analysis. It would be easy to have a dedicated checker for this if we happen to need one day.
Reviewed By: sblackshear
Differential Revision: D5530834
fbshipit-source-id: 316e60f
Dulma Churchill
Jules Villard
Sam Blackshear
Meng Zhang
Jia Chen
Andrzej Kotulski
Alexander Slesarev
Jeremy Dubreil
Daiva Naudziuniene