Summary:
The callee function of a Call can often be resolved
statically. Currently this is resolution is only done dynamically
during symbolic execution by checking if the callee expression is a
function name and looking up the function in the program. This is
wasted and redundant work. Also, the static resolution code is
duplicated in all the domains.
This diff resolves this by resolving known callees statically at
translation time. This involves:
- add an ICall terminator that is the same as Call is currently
- change Call to use a func callee instead of Exp.t
- make callee field mutable since recursive calls can create cycles
- change the Llair.Term.call constructor to return a thunk to perform
the backpatching once the callee has been translated
- modify the Frontend
+ to determine whether to emit Call or ICall depending on whether
the callee in LLVM is already a Function
+ to record the LLVM function -- backpatch thunk pairs encountered during translation
+ record the mapping of LLVM to LLAIR functions during translation
+ to enumerate the calls to backpatch after all functions have been
translated, and find the LLAIR function corresponding to each LLVM
function and backpatch the call to use it as the callee
+ to handle direct calls to undefined functions, when backpatching
translate such function declarations into undefined functions
Reviewed By: jvillard
Differential Revision: D25146152
fbshipit-source-id: 47d2ca1ff
Summary:
Current code partially tries to handle Invoke, but incorrectly, and
these names are only needed for Call. So this diff revises this to be
slightly simpler and less confusing.
Reviewed By: jvillard
Differential Revision: D25146157
fbshipit-source-id: ead4f6f31
Summary: Rework the intrinsic name detection to detect e.g. llvm.memset.*
Reviewed By: jvillard
Differential Revision: D25146150
fbshipit-source-id: 85ebcfb7a
Summary:
The translation of instruction intrinsics that are `Invoke`d is almost
the same as those that are `Call`ed. The same Llair instruction is
produced, but it is wired into the CFG differently. This diff uses the
translation of instruction intrinsics used for `Call`s for `Invoke`s
as well.
Reviewed By: jvillard
Differential Revision: D25146159
fbshipit-source-id: 85a93d915
Summary:
The code that computes the number of actuals is largely duplicated
between the Call and Invoke cases. But some issues have been fixed in
each that ought to be applied to the other. This factors out and
unifies this computation.
Reviewed By: jvillard
Differential Revision: D25146149
fbshipit-source-id: 78552327a
Summary:
Move the translation of Calls to intrinsics that map to instructions
into a separat function.
No functional change.
Reviewed By: jvillard
Differential Revision: D25146169
fbshipit-source-id: 79c640344
Summary:
Previously, when LLAIR was in SSA form, blocks took parameters just
like functions, and it was sometimes necessary to partially apply a
block to some of the parameters. For example, blocks to which function
calls return would need to accept the return value as an argument, and
sometimes immediately jump to another block passing the rest of the
arguments as well. These "trampoline" blocks were partial applications
of the eventual block to all but the final, return value,
argument.
This partial application mechanism meant that function parameters and
arguments were represented as a stack, with the first argument at the
bottom, that is, in reverse order.
Now that LLAIR is free of SSA, this confusion is no longer needed, and
this diff changes the representation of function formal parameters and
actual arguments to be in the natural order. This also brings Call
instructions in line with Intrinsic instructions, which will make
changing the handling of intrinsics from Calls to Intrinsic less
error-prone.
Reviewed By: jvillard
Differential Revision: D25146163
fbshipit-source-id: d3ed07a45
Summary:
The use of realpath on paths obtained from debug info and the current
working directory is application-usage-specific behavior that does not
belong in the backend library. This diff moves these uses to the
frontend and cli, respectively. Also, the use of realpath in the
frontend is memoized along the same lines as the other frontend
translation functions.
This was also the last use of `core` in the `sledge` library, so the
dependency is moved to `sledge_cli` and `sledge_report`.
Reviewed By: ngorogiannis
Differential Revision: D24989070
fbshipit-source-id: c21b275f5
Summary:
Currently __llair_choice is left undefined, and so executed as skip.
This has the correct behavior, but makes it hard to distinguish from
calls to unintentionally-undefined procedures.
Reviewed By: ngorogiannis
Differential Revision: D24989068
fbshipit-source-id: f62981857
Summary:
Global constants have reliable types, and their sizes can be used
instead of storing the size of the initializer separately.
Reviewed By: jvillard
Differential Revision: D24934114
fbshipit-source-id: 2426ab5be
Summary:
The general xlate_value function can be used in place of
xlate_func_name.
Reviewed By: jvillard
Differential Revision: D24846677
fbshipit-source-id: 603ebd388
Summary:
Calling an inline asm function that might raise is not currently
supported.
Reviewed By: jvillard
Differential Revision: D24846675
fbshipit-source-id: a7cfe6050
Summary:
Mangled names start with _Z, so only demangle those names. This leaves
unmangled C names alone.
Reviewed By: jvillard
Differential Revision: D24846674
fbshipit-source-id: d239a61aa
Summary:
Distinguish expressions that name globals from registers. This leads
to clearer code, and globals are semantically distinct from general
registers. In particular, they are constant, so any machinery for
handling assignment does not need to consider them. This diff only
adds the distinction to LLAIR, it is not pushed through to FOL, which
will come later.
Reviewed By: jvillard
Differential Revision: D24846676
fbshipit-source-id: 3aca025bf
Summary:
This module represents the definition of a global constant, rather
than the global itself.
Reviewed By: jvillard
Differential Revision: D24846673
fbshipit-source-id: d47e67984
Summary:
Distinguish expressions that name functions from registers. This leads
to clearer code, and function names are semantically distinct from
general registers. In particular, they are constant, so any machinery
for handling assignment does not need to consider them. Unlike general
globals, they never have initializer expressions, and in particular
not recursive initializers. This diff only adds the distinction to
LLAIR, it is not pushed through to FOL, which will come later.
Reviewed By: jvillard
Differential Revision: D24846672
fbshipit-source-id: 2101f353f
Summary:
The support for recursive references to globals from within their
initializers is enough to handle all the cases of recursive structs
that have been encountered so far. Therefore this diff removes the
complication of recursive records entirely.
Reviewed By: jvillard
Differential Revision: D24772955
fbshipit-source-id: f59f06257
Summary:
It happens so seldomly that it is not worth it to optimistically
assume that linking will make opaque types sized. In particular, it is
incongruent for `Typ.is_sized` to hold and then `Typ.size_of` to
raise.
Reviewed By: jvillard
Differential Revision: D24772956
fbshipit-source-id: 96a72a5cf
Summary:
This information is needed to mediate between index-based
operations (such as on records) and offset-based operations (such as
load/store). Since it is fragile to recompute, the approach here is to
query llvm during translation and store the result.
Reviewed By: jvillard
Differential Revision: D24772954
fbshipit-source-id: ad22c3ecf
Summary:
If these failures are observed in real code of interest, they will
need to be resolved, so they are `todo` rather than an internal
`fail`ure.
Reviewed By: jvillard
Differential Revision: D24746222
fbshipit-source-id: 6b924be58
Summary:
While vector types can be translated, vector operations are not
currently handled. Translating type can lead to later failures (such
as bogus Convert expressions) that are not clearly identifiable as
originating from vector types. So fail eagerly when a vector type is
seen. Note that the only vectors that the frontend sees are due to
incompleteness of the LLVM vectorizer pass.
Reviewed By: jvillard
Differential Revision: D24746224
fbshipit-source-id: 30c0715eb
Summary:
Adding quotes is needed only to avoid clashes between LLVM integer
literals and anonmous value names.
Reviewed By: ngorogiannis
Differential Revision: D24630527
fbshipit-source-id: 97339740c
Summary:
Change the type of `fold` functions to enable them to compose
better. The guiding reasoning behind using types such as:
```
val fold : 'a t -> 's -> f:('a -> 's -> 's) -> 's
```
is:
1. The function argument should be labeled. This is so that it can be
reordered relative to the others, since it is often a multi-line
`fun` expression.
2. The function argument should come last. This enables its
arguments (which are often polymorphic) to benefit from type-based
disambiguation information determined by the types of the other
arguments at the call sites.
3. The function argument's type should produce an
accumulator-transformer when partially-applied. That is,
`f x : 's -> 's`. This composes well with other functions designed
to produce transformers/endofunctions when partially applied, and
in particular improves the common case of composing folds into
"state-passing style" code.
4. The fold function itself should produce an accumulator-transformer
when partially applied. So `'a t -> 's -> f:_ -> 's` rather than
`'s -> 'a t -> f:_ -> 's` or `'a t -> init:'s -> f:_ -> 's` etc.
Reviewed By: jvillard
Differential Revision: D24306063
fbshipit-source-id: 13bd8bbee
Summary:
The treatment of comparison and exceptions in Core/Core_kernel/Base
makes them questionable as the default. This diff changes nonstdlib so
that Core is no longer opened in the global namespace, and makes a few
changes to handle the resulting minor API changes. This leads to a
lighter-touch nonstdlib, which makes a few definitions of its own, and
selects and extends modules from several libraries, including base,
core_kernel, containers, iter.
Reviewed By: jvillard
Differential Revision: D24306090
fbshipit-source-id: 42c91bd1b
Summary:
Just to avoid confusion over directories named 'bin' being expected to
contain binaries, rather than the sources of executables.
Reviewed By: jvillard
Differential Revision: D23636372
fbshipit-source-id: 8593380e6
Josh Berdine