Summary:
Old versions of sawja/javalib got the line numbers slightly wrong. The workaround was to do a regexp search in the source file for the right line.
My understanding is that this is no longer necessary. This diff removes it.
Reviewed By: jvillard
Differential Revision: D19033415
fbshipit-source-id: 2da19d66d
Summary:
This is an optimization. We ask the user to tell us which states are nondeterministic, and we
generate code that handle nondeterminism only for those states. It is common for only one state per
TOPL property to be nondeterministic. This speeds up the biabduction-analysis of the monitor by a
factor of ~10. But, using the monitor is only a little faster.
Facebook
Reviewed By: jvillard
Differential Revision: D19160286
fbshipit-source-id: 4dd39769a
Summary:
In the previous code, it removed non-build-called method calls. For example, it was like
```
{non-build-called: {prop1, prop3}}
{build-called: {}}
b.build();
{non-build-called: {}}
{build-called: {prop1, prop3}}
```
However, this behavior introduced a false positive when there is multiple builders that point to the
same abstract object and `build` is called one by one.
This diff changes the semantics to keep the method calls of non-build-called at `build` calls.
Reviewed By: ezgicicek
Differential Revision: D19144525
fbshipit-source-id: e2ace127f
Summary:
This applies some simplifications that were previously
done after footprint (and therefore lost), and some
simplifications that require looking at both pre and
post.
Reviewed By: ngorogiannis
Differential Revision: D19035494
fbshipit-source-id: bad79534a
Summary:
This havocs event data, so that biabduction doesn't try to
track what was the last event processed by the monitor
(which is redundant as long as the state of the monitor
is tracked).
Reviewed By: ngorogiannis
Differential Revision: D19035491
fbshipit-source-id: a1c75daae
Summary:
Don't instrument SIL when we can determine statically that
biabduction symexec would be a no-op.
Reviewed By: ngorogiannis
Differential Revision: D19116849
fbshipit-source-id: 4d25462a3
Summary: It is confusing to report missing props at the the beginning of the method (especially when there are many components created or when the method has many lines). Let's report them at create methods to better contextualize. Also, make the missing prop bold.
Reviewed By: skcho
Differential Revision: D19141135
fbshipit-source-id: a23d2e7c9
Summary:
In addition to
state1 -> state2: pattern
one can now also write
state1 -> state2: pattern if condition
where "condition" is some conjunction of comparisons (==,<,>) that
involve variables bound by "pattern", registers of the automaton, and
constants.
Reviewed By: ngorogiannis
Differential Revision: D19035496
fbshipit-source-id: 6f6e6a9be
Summary:
According to Java semantics, they are always non-null.
Internally they are represented as static fields, so they have
DeclaredNonnull nullability, which means NullsafeStrict mode would
refuse to use them without strictification.
Lets teach nullsafe that these guys are non-nullables.
See also FN in test case.
Reviewed By: ngorogiannis
Differential Revision: D19024547
fbshipit-source-id: 8c120fa50
Summary:
We do not have the create method in the trace which makes it difficult to understand
- inter-procedural issues where create and prop setting are in different methods
- there are multiple create-build chains in a method
Let's add the create to the beginning of the trace. Moreover, let's simplify the prop printing to make traces easier to understand.
Reviewed By: ngorogiannis
Differential Revision: D19020213
fbshipit-source-id: 7f8a5d4ec
Summary: The new domain is much better than the old one. Let's kill the old one (along with old litho tests) and simplify things.
Reviewed By: skcho
Differential Revision: D18959627
fbshipit-source-id: df77ae20e
Summary:
In order to handle the example added:
changed domain of `MethodCalled`
from `CreatedLocation -> (IsBuildCalled X IsChecked X Set(MethodCall))`
to `(CreatedLocation X IsBuildCalled) -> (IsChecked X Set(MethodCall))`
This avoids joining of two method calls where one is build-called and the other is not, e.g.,
```
if(b) {
o.build();
} else {
// no build call
}
```
changed domain of `NewDomain`
from `Created X MethodCalled`
to `(Created X MethodCalled) X (Created X MethodCalled)`
One is for no returned memory and the other is returned memory. This keeps precision some join
points of branches, e.g.,
```
if(b) {
return;
} else {
// no return
}
```
Reviewed By: ezgicicek
Differential Revision: D18909768
fbshipit-source-id: c39d1a1ef
Summary: It is not used anywhere and there are no plans to revive it. Kill it!
Reviewed By: skcho
Differential Revision: D18934719
fbshipit-source-id: b9b069b96
Summary: Guava uses assertions to ensure a future can be gotten without blocking (this means that if the future is not done, the app will crash). This diff teaches the starvation analyser about a number of such assertions, by treating them as assumes (since we don't care about exceptions).
Reviewed By: jvillard
Differential Revision: D18893427
fbshipit-source-id: 4d26a202b
Summary: A future is guaranteed not to block if `isDone()` has returned true first. Add logic for supporting that by remembering the objects that we have called `isDone` on and by making `assume` do the right thing with that knowledge. All this is achieved with the attribute domain.
Reviewed By: ezgicicek
Differential Revision: D18833901
fbshipit-source-id: 7f4ea0cd1
Summary:
When retrieving a value from a container, we previously had an arbitrary hack which would
- In java, give no ownership to the returned object (trying to be sound)
- In C++ give conditional ownership to the current method's first argument (trying to be complete, but doing it badly, as the first argument may not be the `this` object in a static method, or we might be accessing it through another parameter altogether).
Harmonise both by using the existing ownership of the container as ownership value for the returned object (leaning towards completeness).
Reviewed By: jvillard
Differential Revision: D18882800
fbshipit-source-id: f98f8d315
Summary:
This reverts commit 4fd6165d190bab32544f9f040b777565432c15b2.
We don't need to check for reporting each node anymore. It suffices to just check per function.
Reviewed By: skcho
Differential Revision: D18883833
fbshipit-source-id: 2591b3af3
Summary:
Making `MethodCalled` an inverted map from created location to method calls results in not being able to track a builder that is created in two different branches of a conditional with different types. Instead, we can make `MethodCalled` simply a map and also change `Created` to be a map from access paths to a set of created locations.
To deal with the case of setting a prop only in one branch, we need to ensure that whenever we call a create method, we add a binding to `MethodCalled` with an empty list of methods so that its intersection with a non-empty one is empty.
Reviewed By: skcho
Differential Revision: D18883097
fbshipit-source-id: b3464ca20
Summary: As long as the types match, it should be possible to call build on two components that are created at different locations.
Reviewed By: skcho
Differential Revision: D18881740
fbshipit-source-id: 356f9e168
Summary: Add a FN that is detected by the old domain but not the new one
Reviewed By: ngorogiannis
Differential Revision: D18854389
fbshipit-source-id: 9bdc90a6b
Summary: The map from `CreatedLocation` to `MethodCalls` already takes care of the association from create methods to their set props. `MethodCall` comparison should be oblivious the the receiver, otherwise, we risk mistakenly considering two props set at different locations as different.
Reviewed By: skcho
Differential Revision: D18829388
fbshipit-source-id: b5a0d628d
Summary: This diff check and report on every nodes. Problem of the previous design is that it has to report alarms only with the abstract memory of the exit node. However, the new abstract value becomes imprecise at every join points on the path to the exit node, since it is using inverted map, i.e., under-approximation on collecting called methods. As a solution, this diff report on every nodes where `.build` is called with the abstract memory at that node.
Reviewed By: ezgicicek
Differential Revision: D18809449
fbshipit-source-id: 4fd6165d1
Summary: Current method call comparison is too strong. As exemplified with the new test, one can also set the required prop by calling a version which contains the suffixes. The domain should take care of such cases now.
Reviewed By: skcho
Differential Revision: D18808869
fbshipit-source-id: 9f7672e75
Summary: This diff checks litho condition on the new abstract value. This is triggered with `--new-litho-domain`, but it is intra-procedural as of now.
Reviewed By: ezgicicek
Differential Revision: D18783203
fbshipit-source-id: 98570104e
Summary:
Also add logic for recognising excessive timeouts. Refactor the code
around timeouts a little.
Reviewed By: artempyanykh
Differential Revision: D18807836
fbshipit-source-id: df5a1b566
Summary:
`Object.wait()` must be called on a locked monitor and it releases the
lock immediately, as far as other threads are concerned
(it also magically re-takes the lock when the monitor is `notified`).
Starvation can only occur if the UI thread is waiting
a lock that is distinct to that being waited on.
The check present was over-approximate in that it was checking that there exists a lock held by the UI thread and the thread issuing the `wait`, but did not make sure that lock was *not* the one waited on.
Amusingly, the e2e test was correct, but the reporting code wasn't.
Reviewed By: dulmarod
Differential Revision: D18782919
fbshipit-source-id: b3b98239e
Summary: Similar to constructor established attributes, we do the same here for static initializers. That is, attributes of static properties are injected into the initial state of every method.
Reviewed By: ezgicicek
Differential Revision: D18763192
fbshipit-source-id: 3879a27c5
Summary: This diff extends the bound domain to express multiplication of bounds in some simple cases.
Reviewed By: ezgicicek
Differential Revision: D18745246
fbshipit-source-id: 4f2dcb42c
Summary:
One standard way to schedule work is by starting a thread. We treat this by
- Treating invocations of `start` on a receiver with the `Runnable _` attribute as scheduling that runnable for parallel execution in the background (as opposed to on the UI thread).
- If `start` is used on an object of a subclass of `Thread` everything already works thanks to the `get_exp_attributes` function which will implicitly ascribe to an expression the attribute `Runnable _` if the expression points to an object with a known `run` method. This will even take care of some degree of dynamic dispatch, yay!
- If `start` is used on a `Thread` object which has been created with a constructor call provided with a `Runnable` argument, we have to appropriately model that constructor call, which is what is done in `do_call`.
Reviewed By: jvillard
Differential Revision: D18726676
fbshipit-source-id: 0bd83c28e
Summary:
A current blind spot is when object construction stores specific executors / runnables to object fields, which are then never mutated and accessed from normal methods. IOW the attributes established in the constructor are necessary to report properly inside a normal method (assuming these attributes are not invalidated by method code).
To achieve this, first we retain a subset of the final state attributes in the summary (only those that affect instance variables, in constructor methods). Then, when we analyse a non-constructor method:
- we analyse all constructors
- remove all attributes from the attribute map whose key is not an expression of the form `this.x. ...`
- re-localise all remaining keys so that they appear as rooted in the `this` local variable of the current procedure
- join (intersect) all such attribute maps
- use the result in place of initial state as far as the attribute map is concerned for the analysis of the current procedure, which can now start.
This means we can catch idioms that use side-effectful initialisation for configuring certain object fields like executors or runnables.
Reviewed By: jvillard
Differential Revision: D18707890
fbshipit-source-id: 42ac6108f
Summary: Another way to schedule work in android is by posting it to a `Handler`. A handler can be constructed out of the main looper, which forces it to schedule work on the UI thread. To model all this, we add syntactic models for getting the main looper and for creating handlers, and dataflow attributes for tracking that an expression is a looper/the main looper, or a handler constructed out of a looper.
Reviewed By: skcho
Differential Revision: D18706768
fbshipit-source-id: 7c46e6913
Summary:
This gets rid of false positives when something invalid (eg null) is
passed by reference to an initialisation function. Havoc'ing what the
contents of the pointer to results in being optimistic about said
contents in the future.
Also surprisingly gets rid of some FNs (which means it can also
introduce FPs) in the `std::atomic` tests because a path condition
becomes feasible with havoc'ing.
There's a slight refinement possible where we don't havoc pointers to
const but that's more involved and left as future work.
Reviewed By: skcho
Differential Revision: D18726203
fbshipit-source-id: 264b5daeb
Summary:
This diff fixes the model of substring.
Problem: The cost model of the substring function was to return `size of string - start index` as a
cost. However, sometimes this was a negative number, because of state abstractions on paths, array
elements, call contexts, etc, which caused an exception inadvertently.
This diff changes the model to return just `size of string`, when it cannot say `size of string` is
bigger than `start index`.
Reviewed By: ezgicicek
Differential Revision: D18707954
fbshipit-source-id: 63f27e461
Nikos Gorogiannis
Radu Grigore
Sungkeun Cho
Ezgi Çiçek
Mitya Lyubarskiy
Jules Villard