Summary:
This is several inter-connected changes together to keep the tests
happy.
The ConditionalOperator `b?t:e` is translated by first creating a
placeholder variable to temporarily store the result of the evaluation
in each branch, then the real thing we want to assign to reads that
variable. But, there are situations where that changes the semantics of
the expression, namely when the value created is a struct on the stack
(eg, a C++ temporary). This is because in SIL we cannot assign the
*address* of a program variable, only its contents, so by the time we're
out of the conditional operator we cannot set the struct value
correctly anymore: we can only set its content, which we did, but that
results in a "shifted" struct value that is one dereference away from
where it should be.
So a batch of changes concern `conditionalOperator_trans`:
- instead of systematically creating a temporary for the conditional,
use the `trans_state.var_exp_typ` provided from above if available
when translating `ConditionalOperator`
- don't even set anything if that variable was already initialized by
merely translating the branch expression, eg when it's a constructor
- fix long-standing TODO to propagate these initialization facts
accurately for ConditionalOperator (used by `init_expr_trans` to also
figure out if it should insert a store to the variable being
initialised or not)
The rest of the changes adapt some relevant other constructs to deal
with conditionalOperator properly now that it can set the current
variable itself, instead of storing stuff inside a temp variable. This
change was a problem because some constructs, eg a variable declaration,
will insert nodes that set up the variable before calling its
initialization, and now the initialization happens *before* that setup,
in the translation of the inner conditional operator, which naturally
creates nodes above the current one.
- add a generic helper to force a sequential order between two
translation results, forcing node creation if necessary
- use that in `init_expr_trans` and `cxxNewExpr_trans`
- adjust many places where `var_exp_typ` was incorrectly not reset when translating sub-expressions
The sequentiality business creates more nodes when used, and the
conditionalOperator business uses fewer temporary variables, so the
frontend results change quite a bit.
Note that biabduction tests were invaluable in debugging this. There
could be other constructs to adjust similarly to cxxNewExpr that were
not covered by the tests though.
Added tests in pulse that exercises the previous bug.
Reviewed By: da319
Differential Revision: D24796282
fbshipit-source-id: 0790c8d17
Summary:
This diff adds an option hiding function pointers in costs to users: `cost-suppress-func-ptr` is
true by default.
Reviewed By: ezgicicek
Differential Revision: D24448212
fbshipit-source-id: 88f6b5ea1
Summary: This diff adds closure symbols to operation/allocation costs, when function pointer is called.
Reviewed By: ezgicicek
Differential Revision: D24308550
fbshipit-source-id: 6c5889d41
Summary: This diff prevents printing line numbers of loop in the trace description, which helps to keep the same descriptions even when the line number of a function is changed in tests.
Reviewed By: ezgicicek
Differential Revision: D22375584
fbshipit-source-id: 676d1a7cc
Summary: We do not use an arbitrary threshold to test cost results anymore but instead rely on `cost-issues` which do not have any trace attached. This diff adds traces to `costs-report.json` so that we can test cost issues with traces.
Reviewed By: skcho
Differential Revision: D21858846
fbshipit-source-id: e73321a92
Summary:
Now that we have a way to write cost issues, let's not rely on some arbitrary threshold (and also get rid of `EXPENSIVE_EXECUTION_TIME` issues in tests).
One consequence of this is that we will loose the cost traces in tests since `costs-report.json` doesn't have any traces. Next diff fixes that.
Reviewed By: skcho
Differential Revision: D21837574
fbshipit-source-id: 86b4d028d
Summary:
In order to test cost analysis results, currently we rely on having an arbitrary cost threshold (200) and report issues that exceed this cost. For instance, a cost of 201 is considered expensive and reported as `EXPENSIVE_EXECUTION_TIME` issue in cost tests.
This means, if we change the cost analysis in a slight way that results in some constant cost increase under 200, we wouldn't able to detect it. I find this unsatisfactory and somewhat hacky.
This diff adds the ability to write the result of `costs-report.json` into a separate `cost-issues.exp` and then compare the actual costs (not only than relying on this arbitrary threshold reporting mechanism).
Reviewed By: skcho
Differential Revision: D21816312
fbshipit-source-id: 93b531928
Summary:
The directory names had some interesting variety due to historical
reasons.
- {c,cpp,objc,objcpp}/errors/ date from the time when infer was only
biabduction
- java/infer/ dates from the time when we had an "--analyzer" option and
"infer" was one of them (sic), and eg another was "eradicate".
- c/biabduction/ dates from the time when the biabduction analysis was
being migrated to the "checkers" (AI) framework. For some reasons the
tests there are not a subset of c/infer/ but seem to be entirely new
tests.
The convention now dictates that we should name all of these
*/biabduction/. This diff moves the existing tests from c/biabduction/
into c/biabduction/misc/.
Reviewed By: mityal
Differential Revision: D21300147
fbshipit-source-id: 516d1cb15
Summary:
This diff renames `ZERO_XXX` issues to more appropriately named and descriptive
`XXX_UNREACHABLE_AT_EXIT` and replaces bottom with
unreachable in cost kinds and issues.
Reviewed By: skcho
Differential Revision: D20140301
fbshipit-source-id: eb6076b30
Summary:
The issue type `ZERO_EXECUTION_TIME` actually corresponds to bottom state but has been mistakenly used to mean
- unreachable nodes (program never reaching exit state)
- having zero cost (e.g. for allocations).
Note that, for execution costs, the latter doesn't make sense since we always incur a unit cost for the start node. Hence, a function with empty body will have unit cost. For allocations or IO however, we only incur costs for specific primitives, so a function with no allocations/IO could have a zero cost. However, there is no point reporting functions with zero cost as a specific issue type. Instead, what we want to track is the former, i.e. functions whose cost becomes 0 due to program never reaching exit state.
This diff aims to split these cases into two by only reporting on the latter and adds traces to bottom/unreachable cost by creating a special category in polynomials.
Next diff will rename `ZERO_XXX` to `XXX_UNREACHABLE_AT_EXIT`.
Reviewed By: skcho
Differential Revision: D20005774
fbshipit-source-id: 46b9abd5a
Summary: We had no tests that resulted in `ZERO_EXECUTION_COST`. Let's fix that.
Reviewed By: skcho
Differential Revision: D20097504
fbshipit-source-id: 56c23fea0
Summary:
This diff tries to make less imprecise division by constants results.
For example, the results of the division `[l, u] / c`, where `c` is a positive constant, are:
1. If `l/c` or `u/c` is representable in the bound domain, it uses the precise bounds, i.e., `[l/c, u/c]`.
2. If it is not representable, it tries to make conservative results:
if `0<=l<=u`, it returns `[0, u]` because `0 <= [l/c, u/c] <= u`
if `l<=u<=0`, it returns `[l, 0]` because `l <= [l/c, u/c] <= 0`
if `l<=0<=u`, it returns `[l, u]` because `l <= [l/c, u/c] <= u`
3. otherwise, it returns top, `[-oo, +oo]`
Reviewed By: ezgicicek
Differential Revision: D18270380
fbshipit-source-id: 8fb14c0e4
Summary:
This diff revises widening functions of bounds that have a linear form and a min/max form.
For example, for lower bounds,
* 3 ▽ (1+min(2, x)) = (1+min(2, x))
* 3+x ▽ (3+min(2, x)) = (3+min(2, x))
Reviewed By: jvillard
Differential Revision: D17420786
fbshipit-source-id: ff9eebed3
Summary:
This diff ignores character symbols in the cost results, in order to
avoid FPs from parser code.
Reviewed By: ezgicicek
Differential Revision: D17132053
fbshipit-source-id: d9cf8bd26
Summary: Functions with empty body have unit cost, not zero. The unit cost comes from the start node.
Reviewed By: skcho
Differential Revision: D16855642
fbshipit-source-id: 6b5181faf
Summary: We want to keep big O notation as simple as possible in cost analysis reports (especially in diff time). Therefore, let's not show constants/min/max in big O notations even though the resulting asymptotic bound might be inaccurate. Developers can click on the trace and see the actual cost.
Reviewed By: skcho
Differential Revision: D16731351
fbshipit-source-id: 2e16f7eca
Summary: In order to test changes to bigO notation, let's record them in test results.
Reviewed By: skcho
Differential Revision: D16763972
fbshipit-source-id: c1376909b
Summary:
- Add allocation costs to `costs-report.json` and enable diffing over allocation costs.
- Also, let's be more consistent and modular in naming our cost issues.
- introduce a generic issue type `X_TIME_COMPLEXITY_INCREASE` where `X` can be one of the cost kinds. If the function is on the cold start, issue can have the `COLD_START` suffix. Similarly for infinite/zero/expensive calls.
- Change `PERFORMANCE_VARIATION` -> `EXECUTION_TIME_COMPLEXITY_INCREASE`
- Add new issue type for `ALLOCATION_COMPLEXITY_INCREASE_COLD_START` which will be enabled by default
- Refactor cost issues to be more modular and succinct. This also makes addition of a new cost kind very easy by adding the kind into the `enabled_cost_kinds` list in `CostKind.ml`
Reviewed By: mbouaziz
Differential Revision: D15822681
fbshipit-source-id: cf89ece59
Summary:
Instead of emitting an ad-hoc builtin on variable declaration emit a new
metadata instruction. This allows us to remove the code matching on that
ad-hoc builtin that had to be inserted in several checkers.
Inferbo & pulse used that information meaningfully and had to undergo
some minor changes to cope with the new metada instruction.
Reviewed By: ezgicicek
Differential Revision: D14833100
fbshipit-source-id: 9b3009d22
Summary:
This diff adds a constant to the set of widening thresholds if the
constant is compared to an abstract value in condition expressions.
Each abstract value has its own set of thresholds.
Reviewed By: mbouaziz
Differential Revision: D14147150
fbshipit-source-id: ca0db34d4
Summary: Record where each symbol in a polynomial is coming from: either a loop, function call or a modeled call.
Reviewed By: mbouaziz
Differential Revision: D14047420
fbshipit-source-id: 56d0bd926
Summary: It keeps alias of simple plus/minus arithmetic in order to pruning the value of "++i" expression.
Reviewed By: mbouaziz
Differential Revision: D14080230
fbshipit-source-id: d3af32a32
Summary:
- There is no need to use AI to compute a dot product: let's just fold over all nodes, but still do it in order (using the WTO) to report at the right place
- The previous version was computing a dot product on nodes for each node, which was quadratic, the new version is linear
- Report only once, the first time the threshold is reached (if in a loop, report at the loop head)
Reviewed By: ddino
Differential Revision: D14028171
fbshipit-source-id: b4a840c6e
Summary:
For abstract values representing one concrete value, create only one symbol instead of two.
Still create two symbols (lb, ub) for abstract values representing multiple concrete values (like array cells).
As a consequence, comparisons of symbolic values are more precise (we can even prove equality). I expect to remove a bunch of FPs.
Another consequence is the disappearance of `.lb` and `.ub` in many reports.
Reviewed By: skcho
Differential Revision: D13072084
fbshipit-source-id: 9bc0b9881
Summary:
It materializes symbolic values of function parameters on-demand. The on-demand materialization is triggered when finding a value from an abstract memory and joining/widening abstract memories.
Depends on D13294630
Main idea:
* Symbolic values are on-demand-ly generated by a symbol path and its type
* In order to avoid infinite generation of symbolic values, symbol paths are canonicalized by structure types and field names (which means they are abstracted to the same value). For example, in a linked list, a symbolic value `x->next->next` is canonicalized to `x->next` when the structures (`*x` and `*x->next`) have the same structure type and the same field name (`next`).
Changes from the previous code:
* `Symbol.t` does not include `id` and `pname` for distinguishing symbols. Now, all symbols are compared by `path:SymbolPath.partial` and `bound_end`.
* `SymbolTable` is no longer used, which was used for generating symbolic values with new `id`s.
Reviewed By: mbouaziz
Differential Revision: D13294635
fbshipit-source-id: fa422f084
Summary:
When initialising a variable via semi-exotic means, the frontend loses
the information that the variable was initialised. For instance, it
translates:
```
struct Foo { int i; };
...
Foo s = {42};
```
as:
```
s.i := 42
```
This can be confusing for backends that need to know that `s` actually
got initialised, eg pulse.
The solution implemented here is to insert of dummy call to
`__variable_initiazition`:
```
__variable_initialization(&s);
s.i := 42;
```
Then checkers can recognise that this builtin function does what its
name says.
Reviewed By: mbouaziz
Differential Revision: D12887122
fbshipit-source-id: 6e7214438
Summary: This diff changes pp of binary operation condition in order to avoid a `make test` failure. For the same `uint64_t` type, it is translated to `unsigned long long` in 64bit mac, but `unsigned long` in 64bit linux, which made a `make test` failure.
Reviewed By: mbouaziz
Differential Revision: D10459466
fbshipit-source-id: 449ab548e
Summary:
Fix the logic for computing duplicate symbols. It was broken at some point and some duplicate symbols creeped into our tests. Fix these, and add a test to avoid duplicate symbols detection to regress again.
Also, this removes one use of `Cfg.load`, on the way to removing file-wide CFGs from the database.
Reviewed By: ngorogiannis
Differential Revision: D10173349
fbshipit-source-id: a0d2365b3
Ezgi Çiçek
Jules Villard
Sungkeun Cho
Josh Berdine
Dino Distefano
Mehdi Bouaziz