Summary:
This will be used in the future to determine what to do with destructors
in pulse.
Reviewed By: mbouaziz
Differential Revision: D14324759
fbshipit-source-id: bc3c34471
Summary:
Before, the liveness pre-analysis would place extra instructions in the
CFG for either:
1. marking an `Ident.t` as dead, or
2. marking a `Pvar.t` as `= 0`
But we have no way of marking pvars dead without setting them to 0. This
is bad because setting pvars to 0 is not possible everywhere they are
dead. Indeed, we only do it when we haven't seen their address being
taken anyway. This prevents the following situation, recorded in our tests:
```
int address_taken() {
int** x;
int* y;
int i = 7;
y = &i;
x = &y;
// if we don't reason about taken addresses while adding nullify instructions,
// we'll add
// `nullify(y)` here and report a false NPE on the next line
return **x;
}
```
So we want to mark pvars as dead without nullifying them. This diff
extends the `Remove_temps` SIL instruction to accept pvars as well, and
so renames it to `ExitScope`.
Reviewed By: da319
Differential Revision: D13102953
fbshipit-source-id: aa7f03a52
Summary:
Useful to understand the changes in the pre-analysis, or to inspect the
CFG that checkers actually get.
This means that the pre-analysis always runs when we output the dotty,
but I don't really see a reason why not. In fact, we could probably
*always* store the CFGs as pre-analysed.
Reviewed By: mbouaziz
Differential Revision: D13102952
fbshipit-source-id: 89f3102ec
Summary:
When initialising a variable via semi-exotic means, the frontend loses
the information that the variable was initialised. For instance, it
translates:
```
struct Foo { int i; };
...
Foo s = {42};
```
as:
```
s.i := 42
```
This can be confusing for backends that need to know that `s` actually
got initialised, eg pulse.
The solution implemented here is to insert of dummy call to
`__variable_initiazition`:
```
__variable_initialization(&s);
s.i := 42;
```
Then checkers can recognise that this builtin function does what its
name says.
Reviewed By: mbouaziz
Differential Revision: D12887122
fbshipit-source-id: 6e7214438
Summary:
In order to know whether a global variable is an integral constant
expression in C, this diff adds a field for the results of isInitICE.
The controller you requested could not be found.: facebook-clang-plugins
Reviewed By: mbouaziz
Differential Revision: D12838521
fbshipit-source-id: 388bff1f3
Summary:
It uses platform-dependent integer type widths information when
constructing Sizeof expressions which have a field(`nbytes`)
representing the static results of the evaluation of `sizeof(typ)`.
Reviewed By: mbouaziz
Differential Revision: D10504715
fbshipit-source-id: 0c79d37d8
Summary:
New clang in the plugin \o/
Changes that were needed:
- (minor) Some extra AST nodes
- defining a lambda and calling it in the same line (`[&x]() { x = 1; }()`) used to get translated as a call of the literal but now an intermediate variable gets created, which confuses uninit in one test. I added another test to showcase the limitation this is hitting: storing the lambda in a variable then calling it will not get caught by the checker.
The controller you requested could not be found.: facebook-clang-plugins
Reviewed By: jeremydubreil
Differential Revision: D10128626
fbshipit-source-id: 8ffd19f3c
Summary:
Change the license of the source code from BSD + PATENTS to MIT.
Change `checkCopyright` to reflect the new license and learn some new file
types.
Generated with:
```
git grep BSD | xargs -n 1 ./scripts/checkCopyright -i
```
Reviewed By: jeremydubreil, mbouaziz, jberdine
Differential Revision: D8071249
fbshipit-source-id: 97ca23a
Summary:
Labels inside switch statements were causing havoc (see test), and the translation of switch statements in general could be improved to handle more cases.
It turns out that `case` (and `default`) statements are more or less fancy labels into the code. In other words, if you erase all the `case XXX:` and `default:` strings in the `switch` statement you get the real structure of the program, and `switch` just jumps straight to the first `case` directives (and to the second if the first one is not satisfied, etc. until all `case`/`default` have been considered).
This suggests an alternative implementation: translate the body of the `switch` and simply record the list of switch cases inside that body, along with where they point to. Then post-process this list to construct the control flow of the `switch`, which points into the control-flow of the `body`. In order not to modify every function in `CTrans` to propagate the current list of cases, I created an ugly `ref` inside `SwitchCase` instead (but it cannot be directly accessed and it's guaranteed to be well-parenthesised wrt nested switches by the `SwitchCase` API so it's not too bad).
[unrelated] Also make translation failures output more information about what exactly in the source code is causing the crash, and the ancestors in the AST that lead to the crash site.
Reviewed By: martinoluca
Differential Revision: D8011046
fbshipit-source-id: 8455090
Summary:
Previously, the type of `trans_result` contained a list of SIL expressions.
However, most of the time we expect to get exactly one, and getting a different
number is a soft(!) error, usually returning `-1`.
This splits `trans_result` into `control`, which contains the information
needed for temporary computation (hence when we don't necessarily know the
return value yet), and a new version of `trans_result` that includes `control`,
the previous `exps` list but replaced by a single `return` expression instead,
and a couple other values that made sense to move out of `control`. This allows
some flexibility in the frontend compared to enforcing exactly one return
expression always: if they are not known yet we stick to `control` instead (see
eg `compute_controls_to_parent`).
This creates more garbage temporary identifiers, however they do not show up in
the final cfg. Instead, we see that temporary IDs are now often not
consecutive...
The most painful complication is in the treatment of `DeclRefExpr`, which was
actually returning *two* expressions: the method name and the `this` object.
Now the method name is a separate (optional) field in `trans_result`.
Reviewed By: mbouaziz
Differential Revision: D7881088
fbshipit-source-id: 41ad3b5
Summary:
This is an attempt to make things more consistent, and maybe save some work
from the `Format` module in case flambda doesn't have our backs.
Reviewed By: jberdine
Differential Revision: D7775496
fbshipit-source-id: 59a6314
Summary:
This simplifies the frontends and backends in most cases. Before this diff,
returning `void` could be modelled either with a `None` return, or a dummy
return variable with type `Tvoid`. Now it's always the latter.
Reviewed By: sblackshear, dulmarod
Differential Revision: D7832938
fbshipit-source-id: 0a403d1
Summary: Returning the list of sub-expressions is not right and can cause assertion failures elsewhere in the frontend.
Reviewed By: dulmarod
Differential Revision: D7813493
fbshipit-source-id: 33ac9c1
Summary:
When looking at large CFGs, at least in `xdot`, it's often difficult to find
the procedure you're looking for. Sorting the proc names puts them in
alphabetical order, which makes searching one procedure easier.
Reviewed By: mbouaziz
Differential Revision: D7758521
fbshipit-source-id: 8e9997f
Summary:
Switch to the current stable branch for clang.
update-submodule: facebook-clang-plugins
Reviewed By: mbouaziz
Differential Revision: D7067890
fbshipit-source-id: aedff90
Summary: We do not inject a destructor call if the destructor declaration does not contain a body in AST. We miss all the cases where the destructor is declared in `.h` file and defined in `.cpp` file as other files include `.h` file and do not contain the body of the destructor when destructor calls are being injected based on AST information. After this diff we inject destructor calls even if we do not have body for the destructor in AST.
Reviewed By: sblackshear
Differential Revision: D6796567
fbshipit-source-id: 1c187ec
Summary:
This diff fixes the translation of `new` and `placement new` with one argument. If `placement new` has more than one argument it means that it is user-defined (this will be addressed in another diff).
update-submodule: facebook-clang-plugins
Reviewed By: sblackshear, mbouaziz
Differential Revision: D6807751
fbshipit-source-id: 7cf0290
Summary:
Not sure what an "iCFG" is but the dotty is only about CFGs anyway.
Diff obtained by mass-`sed`.
Reviewed By: sblackshear
Differential Revision: D6324280
fbshipit-source-id: b7603bb
Summary:
This resolves#796 . Effectively it adds file specific suffix to name of all global initializers (so initializersof two global variable of the same name will have unique Typ.Procname). which is the same rule as currently used by constructing Procname for the static functions. However this change applies to initializers of all global variables and not just static (arguably it's a right thing. since GCC used to allow multiple global variables with the same name).
Consequences of this change that it becomes impossible to know name of generated initialization function of global ('extern') variables. However get_initializer_pname function is only referenced by the frontend (when creating initializer for the defined global variables) and by the SIOF checker.
Closes https://github.com/facebook/infer/pull/801
Reviewed By: jvillard
Differential Revision: D6335034
Pulled By: dulmarod
fbshipit-source-id: 1a92c08
Summary:
The previous domain for SIOF was duplicating some work with the generic Trace
domain, and basically was a bit confused and confusing. A sink was a set of
global accesses, and a state contains a set of sinks. Then the checker has to
needlessly jump through hoops to normalize this set of sets of accesses into a
set of accesses.
The new domain has one sink = one access, as suggested by sblackshear. This simplifies
a few things, and makes the dedup logic much easier: just grab the first report
of the list of reports for a function.
We only report on the fake procedures generated to initialise a global, and the
filtering means that we keep only one report per global.
Reviewed By: sblackshear
Differential Revision: D5932138
fbshipit-source-id: acb7285
Summary:
With this change and the previous facebook-clang-plugins change, infer no
longer exhausts the biniou buffer when reading the serialized C++ AST.
update-submodule: facebook-clang-plugins
Reviewed By: mbouaziz
Differential Revision: D5891081
fbshipit-source-id: cf48eac
Summary: The prune nodes where translated as `prune (expr = false)` and `prune ( expr != false)`. This case is a bit tricky to deconstruct in HIL. This diff translates the prune instructions as just `prune !expr` for the true branch and `prune expr` for the false branch.
Reviewed By: dulmarod
Differential Revision: D5832147
fbshipit-source-id: 2c3502d
Summary:
We need to make sure that destructors of virtual base classes are called only once. Similarly to what clang does, we have two destructors for a class: a destructor wrapper and an inner destructor.
Destructor wrapper is called from outside, i.e., when variables go out of scope or when destructors of fields are being called.
Destructor wrappers have calls to inner destructors of all virtual base classes in the inheritance as their bodies.
Inner destructors have destructor bodies and calls to destructor wrappers of fields and inner destructors of non-virtual base classes.
Reviewed By: dulmarod
Differential Revision: D5834555
fbshipit-source-id: 51db238
Summary:
The "placement new" operator `new (e) T` constructs a `T` in the pre-allocated memory address `e`.
We weren't translating the `e` part, which was leading to false positives in the dead store analysis.
Reviewed By: dulmarod
Differential Revision: D5814191
fbshipit-source-id: 05c6fa9
Summary:
Simple instance of the problem: analyzing the following program times out.
```
#include <tuple>
void foo() {
std::tuple<std::tuple<int>> x;
}
```
Replacing `std::tuple<std::tuple<int>>` by `std::tuple<int>` makes the analysis
terminate.
In the AST, both tuple<tuple<int>> and tuple<int> have the same template
specialization type: "Pack" (which means we're supposed to go look into the
arguments of the template to get their values). This is not information enough
and that's the plugin fault.
On the backend side, this means that two types have the same Typ.Name.t, namely
"std::tuple<_>", so they collide in the tenv. The definition of
tuple<tuple<int>> is the one making it into the tenv. One of the fields of the
corresponding CxxRecord is of type "tuple<int>", which we see as the same
"tuple<_>", which causes the loop.
update-submodule: facebook-clang-plugins
Reviewed By: mbouaziz
Differential Revision: D5775840
fbshipit-source-id: 0528604
Summary: Destroying local variables that are out of scope after `continue`.
Reviewed By: jberdine
Differential Revision: D5804120
fbshipit-source-id: 638cff5
Summary: Destroying local variables that are out of scope after `break`.
Reviewed By: jberdine
Differential Revision: D5764647
fbshipit-source-id: a7e06ae
Summary: The successor node of `continue` was not correct inside the `do while`.
Reviewed By: sblackshear
Differential Revision: D5769578
fbshipit-source-id: d7b0843
Summary: We inject destructor calls of base classes inside destructor bodies after the destructor calls of fields.
Reviewed By: dulmarod
Differential Revision: D5745499
fbshipit-source-id: 90745ec
Summary: We used to crash whenever we hit these. The simple translation implemented here is not particularly inspiring, but it is better than crashing.
Reviewed By: jvillard
Differential Revision: D5702095
fbshipit-source-id: 3795d43
Summary:
Previous version was hard to understand because it was doing many things within same code. New version has different code for Arrays, Structs and others.
There is some copy-paste, but it's easier to follow code (open to suggestions though)
Reviewed By: dulmarod
Differential Revision: D5547999
fbshipit-source-id: 77ecb24
Summary:
Bumps facebook-clang-plugins to a version that outputs sizeof() info in bytes and not bits.
update-submodule: facebook-clang-plugins
Reviewed By: akotulski
Differential Revision: D5526747
fbshipit-source-id: 6019542
Summary: The `--failures-allowed` was doing for the Clang frontend what `--keep-doing` was doing for the backend. This revision merges the two options to simplify the Infer CLI and our tests.
Reviewed By: jvillard
Differential Revision: D5474347
fbshipit-source-id: 09bcea4
Summary:
This diff tries to achieve the followings: if we have the following C++ codes:
```
bool foo(int x, int y) {
return &x == &y;
}
```
We want the C++ frontend to emit Sil as if the input is written as
```
bool foo(int x, int y) {
if (&x == &y) return 1; else return 0;
}
```
This matches the behavior of our Java frontend.
The reason why we prefer an explicit branch is that it will force the backend to eagerly produce two different specs for `foo`. Without the explicit branch, for the above example the backend would produce one spec with `return = (&x == &y)` as the post condition, which is not ideal because (1) we don't want local variables to escape to the function summary, and (2) with the knowledge that no two local variables may alias each other, the backend could actually determines that `&x == &y` is always false, emitting a more precise postcondition `return = 0`. This is not possible if we do not eagerly resolve the comparison expression.
Reviewed By: akotulski
Differential Revision: D5260745
fbshipit-source-id: 6bbbf99
David Lively
Jules Villard
Sungkeun Cho
Mehdi Bouaziz
Daiva Naudziuniene
Dulma Churchill
Ezgi Çiçek
Jeremy Dubreil
Sam Blackshear
Andrzej Kotulski
Jia Chen