Summary:
Before, the liveness pre-analysis would place extra instructions in the
CFG for either:
1. marking an `Ident.t` as dead, or
2. marking a `Pvar.t` as `= 0`
But we have no way of marking pvars dead without setting them to 0. This
is bad because setting pvars to 0 is not possible everywhere they are
dead. Indeed, we only do it when we haven't seen their address being
taken anyway. This prevents the following situation, recorded in our tests:
```
int address_taken() {
int** x;
int* y;
int i = 7;
y = &i;
x = &y;
// if we don't reason about taken addresses while adding nullify instructions,
// we'll add
// `nullify(y)` here and report a false NPE on the next line
return **x;
}
```
So we want to mark pvars as dead without nullifying them. This diff
extends the `Remove_temps` SIL instruction to accept pvars as well, and
so renames it to `ExitScope`.
Reviewed By: da319
Differential Revision: D13102953
fbshipit-source-id: aa7f03a52
Summary:
Useful to understand the changes in the pre-analysis, or to inspect the
CFG that checkers actually get.
This means that the pre-analysis always runs when we output the dotty,
but I don't really see a reason why not. In fact, we could probably
*always* store the CFGs as pre-analysed.
Reviewed By: mbouaziz
Differential Revision: D13102952
fbshipit-source-id: 89f3102ec
Summary:
When initialising a variable via semi-exotic means, the frontend loses
the information that the variable was initialised. For instance, it
translates:
```
struct Foo { int i; };
...
Foo s = {42};
```
as:
```
s.i := 42
```
This can be confusing for backends that need to know that `s` actually
got initialised, eg pulse.
The solution implemented here is to insert of dummy call to
`__variable_initiazition`:
```
__variable_initialization(&s);
s.i := 42;
```
Then checkers can recognise that this builtin function does what its
name says.
Reviewed By: mbouaziz
Differential Revision: D12887122
fbshipit-source-id: 6e7214438
Summary:
Fix the logic for computing duplicate symbols. It was broken at some point and some duplicate symbols creeped into our tests. Fix these, and add a test to avoid duplicate symbols detection to regress again.
Also, this removes one use of `Cfg.load`, on the way to removing file-wide CFGs from the database.
Reviewed By: ngorogiannis
Differential Revision: D10173349
fbshipit-source-id: a0d2365b3
Summary:
New clang in the plugin \o/
Changes that were needed:
- (minor) Some extra AST nodes
- defining a lambda and calling it in the same line (`[&x]() { x = 1; }()`) used to get translated as a call of the literal but now an intermediate variable gets created, which confuses uninit in one test. I added another test to showcase the limitation this is hitting: storing the lambda in a variable then calling it will not get caught by the checker.
The controller you requested could not be found.: facebook-clang-plugins
Reviewed By: jeremydubreil
Differential Revision: D10128626
fbshipit-source-id: 8ffd19f3c
Summary:
Goal of the stack: deprecate the `--analyzer` option in favour of turning
individual features on and off. This option is a mess: some of the options are
now subcommands (compile, capture), others are aliases (infer and checkers),
and they can all be replicated using some straightforward combination of other
options.
This diff: stop using `--analyzer` in tests. It's mostly `checkers` everywhere,
which is already the default. `linters` becomes `--no-capture --linters-only`.
`infer` is supposed to be `checkers` already. `crashcontext` is
`--crashcontext-only`.
Reviewed By: mbouaziz
Differential Revision: D9942689
fbshipit-source-id: 048281761
Summary: This fixes a flaky test where some issues would disappear and re-appear.
Reviewed By: da319
Differential Revision: D9027686
fbshipit-source-id: 5ac314096
Summary: This allows Eradicate to detect more issues related to inconsistent annotations with sub-typing.
Reviewed By: ngorogiannis
Differential Revision: D9807306
fbshipit-source-id: 159d5d4e8
Summary:
First version of differential for costs, based on polynomial's degree's variation. The rule is very simple:
For a given polynomial that is available before and after a diff, `if degree_before > degree_after`, then the issue becomes `fixed`. Instead, `if degree_before < degree_after`, then the issue becomes `introduced`.
Reviewed By: ezgicicek
Differential Revision: D9810150
fbshipit-source-id: d08285926
Summary:
Not all clang commands are happy with all arguments, but the driver is usually
the place we want to add arguments to.
Reviewed By: martinoluca
Differential Revision: D9421403
fbshipit-source-id: fa6d39a9b
Summary: The `procedure` field in the final report should use the non-ambiguous fully qualified name containing the Java package declaration and the list of parameter types.
Reviewed By: mbouaziz
Differential Revision: D9237522
fbshipit-source-id: e9b0ff664
Summary: This test was not re-run when the Java dependencies were changing
Reviewed By: mbouaziz
Differential Revision: D9238288
fbshipit-source-id: 65cc9c03c
Summary:
Some paths are hardcoded in infer as being relative to the current executable,
for instance the directory where to find the models. By copying infertop.bc to
infer/bin like we do for `infer` these relative paths lead to the expected
place, which means models can be loaded in the toplevel like they would be in a
normal infer execution. This is more useful for debugging than previously.
Reviewed By: jeremydubreil, mbouaziz
Differential Revision: D9197142
fbshipit-source-id: 48c4f82fb
Summary:
This makes sure that the javac_jar is disabled when setting the external compiler option to point at the Infer wrapper
Closes#976
Reviewed By: jvillard
Differential Revision: D9193336
fbshipit-source-id: abafb51fc
Summary: This code is no longer necessary because the bug hash does not depend on the name of the anonymous classes
Reviewed By: mbouaziz
Differential Revision: D9176205
fbshipit-source-id: 9a8e9c9f8
Summary:
It's useful to test that the bucket a given error is classified as doesn't
change over time without notice.
This records the bucket for *all* the tests, even though some never produce a
bucket. This is to be on the safe size instead of risking to forget adding the
bucket information when the test changes, or when copy/pasting from a test that
doesn't have buckets to one that does.
The implementation is pretty crude: it greps the beginning of the qualifier
string for a `[bucket]`.
Reviewed By: mbouaziz
Differential Revision: D8236393
fbshipit-source-id: b3b1eb9
Summary:
Change the license of the source code from BSD + PATENTS to MIT.
Change `checkCopyright` to reflect the new license and learn some new file
types.
Generated with:
```
git grep BSD | xargs -n 1 ./scripts/checkCopyright -i
```
Reviewed By: jeremydubreil, mbouaziz, jberdine
Differential Revision: D8071249
fbshipit-source-id: 97ca23a
Summary: Follow C++ in having local variables owned plus silence reports on paths rooted on logical vars. We need both because when propagating ownership from right to left, the initial status of a temp var as owned is lost.
Reviewed By: sblackshear
Differential Revision: D7988575
fbshipit-source-id: 2e817d7
Summary:
Previously, the type of `trans_result` contained a list of SIL expressions.
However, most of the time we expect to get exactly one, and getting a different
number is a soft(!) error, usually returning `-1`.
This splits `trans_result` into `control`, which contains the information
needed for temporary computation (hence when we don't necessarily know the
return value yet), and a new version of `trans_result` that includes `control`,
the previous `exps` list but replaced by a single `return` expression instead,
and a couple other values that made sense to move out of `control`. This allows
some flexibility in the frontend compared to enforcing exactly one return
expression always: if they are not known yet we stick to `control` instead (see
eg `compute_controls_to_parent`).
This creates more garbage temporary identifiers, however they do not show up in
the final cfg. Instead, we see that temporary IDs are now often not
consecutive...
The most painful complication is in the treatment of `DeclRefExpr`, which was
actually returning *two* expressions: the method name and the `this` object.
Now the method name is a separate (optional) field in `trans_result`.
Reviewed By: mbouaziz
Differential Revision: D7881088
fbshipit-source-id: 41ad3b5
Jeremy Dubreil
Jules Villard
Martino Luca
Martin Trojer
Mehdi Bouaziz
Sungkeun Cho
Dino Distefano
Katie Ots
Dulma Churchill
Nikos Gorogiannis