Summary:
Preparing for bigger changes...
- Rename `payload` field to `payloads`
- Move `payload` type to `Payloads.t`
- `SummaryPayload`s only have to implement a change on `Payloads.t` rather than `Summary.t`
Reviewed By: sblackshear
Differential Revision: D7987211
fbshipit-source-id: c9d7a74
Summary:
Attempt at a better naming scheme:
- `Specs.summary` are now `Summary.t`. The `Summary` module (replacing `Specs`) contains the summary of a procedure: the results of all the analyses, etc.
- `Summary.ml` is now `SummaryPayload.ml`. This concerns how each (AI) analysis extracts its payload from the master summary.
- Accordingly, checkers now define a `Payload` module where previously they defined a `Summary` module. The type is also cleaned up to use `t` instead of `payload`, etc.
- Cleaned up some names as a result, for instance `Specs.get_summary` -> `Summary.get`, etc.
Reviewed By: ngorogiannis
Differential Revision: D7935883
fbshipit-source-id: 1766545
Summary:
Upgrade ocamlformat, and base which needs to be done in sync in order to build
ocamlformat, and the other deps can come for the ride.
Reviewed By: jvillard
Differential Revision: D7663537
fbshipit-source-id: 3e90970
Summary:
Now that everything can run at the same time and we have preanalyses, it can be quite hard to read debug sessions.
Here come session names!
Depends on D7607336
Reviewed By: sblackshear
Differential Revision: D7607481
fbshipit-source-id: 676af86
Summary:
Was trying to decide where to add a new Java utility function and realized that things are a bit disorganized.
Some operations on `Typ.Name.t`'s live in `Typ.Procname`, and some live inside an inner `Java` module whereas some are outside of the module with a `java_` prefix.
Let's move toward putting all Java/C/Objc/C++-specific functions in dedicated modules.
This diff does some of the work for Java.
There are Java-specific functions that operate on `Typ.Procname.t`'s that will have to be converted to work on `Typ.Procname.Java.t`'s, but changing those clients will be more involved.
Will also move C/Objc/C++ functions in a follow-up.
Reviewed By: jeremydubreil
Differential Revision: D6737724
fbshipit-source-id: cdd6e68
Summary:
Upgrade ocamlformat to 0.3, and (necessarily) base to v0.10.0.
- Fix accumulated mis-formatting
- Update opam.lock to unbreak clean build
- Update to base v0.10.0
- Update opam.lock for base
- Update offline opam repo
- Everyone should already have removed their ocamlformat pin
- ocamlformat 0.3 supports output to stdout natively
- bump version of ocamlformat
Reviewed By: jeremydubreil
Differential Revision: D6636741
fbshipit-source-id: 41a56a8
Summary:
Install ocamlformat from github as part of `make devsetup`, and use it
for formatting OCaml (and jbuild) code.
Reviewed By: jvillard
Differential Revision: D6092464
fbshipit-source-id: 4ba0845
Summary:
- failwith police: no more `failwith`. Instead, use `Logging.die`.
- Introduce the `SimpleLogging` module for dying from modules where `Logging`
cannot be used (usually because that would create a cyclic dependency).
- always log backtraces, and show backtraces on the console except for usage errors
- Also point out in the log file where the toplevel executions of infer happen
Reviewed By: jeremydubreil
Differential Revision: D5726362
fbshipit-source-id: d7a01fc
Summary:
Conversion and reformat of infer source using ocamlformat
auto-formatting tool.
Current status:
- Because Reason does not handle docstrings, the output of the
conversion is not 'Warning 50'-clean, meaning that there are
docstrings with ambiguous placement. I'll need to manually fix
them just before landing.
Reviewed By: jvillard
Differential Revision: D5225546
fbshipit-source-id: 3bd2786
Summary: This will avoid the redefine this Map and Set module as pretty printable when used to create abstract domains.
Reviewed By: sblackshear
Differential Revision: D4811849
fbshipit-source-id: e2f6763
Summary:
This is step further simplify the code to avoid cases where the summary of the procedure being analyzed can exist in two different versions:
# one version is the summary passed as parameter to every checker
# the other is a copy of the summary in the in-memory specs table
This diff implements:
# the analysis always run through the `Ondemand` module (was already the case before)
# the summary of the procedure being analyzed is created at the beginning of the on-demand analysis call
# all the checkers run in sequence, update their respective part of the payload and log errors to the error table
# the summary is store at the end of the on-demand analysis call
Reviewed By: sblackshear
Differential Revision: D4787414
fbshipit-source-id: 2d115c9
Summary: This call is redundant and is already done in `AbstractInterpreter`
Reviewed By: sblackshear
Differential Revision: D4754251
fbshipit-source-id: af2d11e
Summary:
Changes every checker to take a summary as parameter and return the updated summary to the next checker. Since several operations, like `Reporting.log_*` are modifying the summary in memory by loading them from the in-memory cache of summaries, we currently need to rely on `Specs.get_summary_unsafe` to return the updated version of the summary.
This diff allows to change the API of `Reporting` to take a summary as input and progressively remove all the calls `Specs.get_summary_unsafe` independently from adding the possibility to run several checkers at the same time. The final objective to have every checker just passing around the summary of the procedure being analyzed, and having the in-memory cache only use to store the summaries of the callees.
Reviewed By: sblackshear
Differential Revision: D4649252
fbshipit-source-id: 98f7ca7
Summary: Being forced to separately define `pp_element`/`pp_key` is uneccessary and makes it more cumbersome to create a set/map from an existing module that already defines `pp`.
Reviewed By: jeremydubreil
Differential Revision: D4517308
fbshipit-source-id: 9b17c9c
Summary:
At one point I thought we'd want to have lots of different schedulers for things like exploring loops in different orders, but that hasn't materialized.
Let's make the common use-case simpler by hiding the `Scheduler` parameter inside the `AbstractInterpreter` module.
We can always expose `MakeWithScheduler` later if we want to.
Reviewed By: jberdine
Differential Revision: D4508095
fbshipit-source-id: 726e051
Summary:
Remove the remaining uses of polymorphic equality `=`.
In case of basic types, this is replaced by String.equal or Int.equal.
In case of `= []`, this is replaced by `List.is_empty`.
In case of `= None`, this is replaced by `is_none`.
In case of a datatype definition such as `type a = A | B`,
a `compare_a` function is defined by adding `type a = A | B [@deriving compare]`
and a `equal_a` function is defined as `let equal_a = [%compare.equal : a]`.
In case of comparison with a polymorphic variant `= `Yes`, the equality
defined in `PVariant.(=)` is used. Typically, `open! Pvariant` is added
at the beginning of the file to cover all the uses.
Reviewed By: jberdine
Differential Revision: D4456129
fbshipit-source-id: f31c433
Summary:
A domain should not definite its initial state, since distinct users of the domain may want to choose different initial values.
For example, one user might want to bind all of the formals to some special values, and one user might want the initial domain to be an empty map
This diff makes this distinction clear in the types by (a) requiring the initial state to be passed to the abstract interpreter and (b) lifting the requirement that abstract domains define `initial`.
Reviewed By: jberdine
Differential Revision: D4359629
fbshipit-source-id: cbcee28
Summary:
Utils contains definitions intended to be in the global namespace for
all of the infer code-base, as well as pretty-printing functions, and
assorted utility functions mostly for dealing with files and processes.
This diff changes the module opened into the global namespace to
IStd (Std conflict with extlib), and moves the pretty-printing
definitions from Utils to Pp.
Reviewed By: jvillard
Differential Revision: D4232457
fbshipit-source-id: 1e070e0
Summary:
Functions related to source files were already namespaced by `source_file_` prefix. Make separate module for them.
In high level it replaces all `source_file_` with `SourceFile.` and then fixes all remaining compilation errors
Reviewed By: jvillard
Differential Revision: D4299053
fbshipit-source-id: 20b1d39
Summary: Noticed this when I was writing the documentation for the abstract interpretation framework and was curious about why `Ondemand.analyze_proc` needs the type environment. It turns out that the type environment is only used to transform/normalize Infer bi-abduction specs before storing them to disk, but this can be done elsewhere. Doing this normalization elsewhere simplifies the on-demand API, which is a win for all of its clients.
Reviewed By: cristianoc
Differential Revision: D4241279
fbshipit-source-id: 957b243
Summary:
Analyses should handle methods whose code is unknown and methods whose summary is a no-op differently.
Previously, this was done correctly for some kinds of methods (e.g., native methods, which were recognized as unknown), but not for others (interface and abstract methods).
This diff makes sure we correctly treat all three kinds as unknown.
Reviewed By: jeremydubreil
Differential Revision: D4142697
fbshipit-source-id: c88cff3
Summary:
This is needed for later: InferClang will no longer be started once for each
source file to be analysed. Instead, it will be called to analyse several files
at once, and will analyse them one by one. Thus, `clang_lang` and `source_file`
are moved to `cFrontend_config` as references.
The biggest change this entailed was the new logging infrastructure, which was
depending on `Config.source_file`. This diff moves the logic entirely to
`Logging`, and changes the API so that executables wishing to log into files
have to set it up using `Logging.set_log_file_identifier`. This can be called
several times during the execution, allowing to dynamically change the log file
(eg, when analysing several source files one by one!).
Reviewed By: jberdine
Differential Revision: D3944148
fbshipit-source-id: 6129090
Summary:
Pass the exe_env to checker cluster callbacks, and add it to the domain
extras for BoundedCallTree, and use the Exe_env instead of
AttributesTable to obtain the tenv.
Reviewed By: sblackshear
Differential Revision: D3921850
fbshipit-source-id: 9edf324
Mehdi Bouaziz
Jules Villard
Josh Berdine
Sam Blackshear
Dulma Churchill
Jeremy Dubreil
Andrzej Kotulski
Cristiano Calcagno
Lázaro Clapp Jiménez Labora