Summary:
It terminates narrowing when new and old states are not comparable.
Since current narrowing does not use meet operations guaranteeing
termination of narrowing, it tries to terminate narrowing more
conservatively.
Reviewed By: mbouaziz
Differential Revision: D12815419
fbshipit-source-id: e8b45199e
Summary: It tries division on minmax value approximately, rather than just returning infinities. For example, `[0,2+min(6,s)] / 2` returns `[0,4]`.
Reviewed By: mbouaziz
Differential Revision: D10867091
fbshipit-source-id: d3f49987b
Summary:
This diff preserves values of offset and index separately, rather than
one value of their addition, because premature addition results in
imprecise FPs by the limited expressiveness of the domain.
Reviewed By: mbouaziz
Differential Revision: D10851393
fbshipit-source-id: 1685ead36
Summary:
The time has come to keep track of which tests pass and which are FP/FN
for pulse.
Reviewed By: mbouaziz
Differential Revision: D10854064
fbshipit-source-id: 60938e48f
Summary:
Turns out once a vector array became invalid it stayed that way, instead
of the vector getting a new valid internal array.
Reviewed By: skcho
Differential Revision: D10853532
fbshipit-source-id: f6f22407f
Summary:
Now the domain can reason about `&` and `*` too. When recording `&`
between two locations also record a back-edge `*`, and vice-versa.
Reviewed By: mbouaziz
Differential Revision: D10509335
fbshipit-source-id: 8091b6ec0
Summary: This is more flexible and allows us to give more details when reporting.
Reviewed By: mbouaziz
Differential Revision: D10509336
fbshipit-source-id: 79c3ac1c8
Summary: Just to organise PulseDomain a bit more since it's quite big.
Reviewed By: mbouaziz
Differential Revision: D10509334
fbshipit-source-id: a81b36aa6
Summary: This should stop the bleeding until we get a better solution like shared memory + single writer process.
Reviewed By: mbouaziz
Differential Revision: D10868360
fbshipit-source-id: a4d0b064e
Summary: To avoid reporting on private methods, ignore those starting with underscore. Other cleanups.
Reviewed By: jvillard
Differential Revision: D10558970
fbshipit-source-id: 0572f1e70
Summary:
Invalidating addresses for destructors to catch use after destructor errors.
To pass ownership tests for use after destructor errors, we still need to:
(1) fix pointer arithmetic false positives
(2) add model for placement new to fix false positives
(3) add model for operator= to fix false positives
(4) support inter-procedural analysis for destructor_order_bad test
Reviewed By: jvillard
Differential Revision: D10450912
fbshipit-source-id: 2d9b1ee68
Summary:
It uses platform-dependent integer type widths information when
constructing Sizeof expressions which have a field(`nbytes`)
representing the static results of the evaluation of `sizeof(typ)`.
Reviewed By: mbouaziz
Differential Revision: D10504715
fbshipit-source-id: 0c79d37d8
Summary: Reports will now be issued for the class loads of the methods specified by the option `--class-loads-roots`.
Reviewed By: jvillard
Differential Revision: D10466492
fbshipit-source-id: 91456d723
Summary:
Instead of the non-sensical piecewise join we had until now write
a proper one. Hopefully the comments explain what it does. Main one:
```
(* high-level idea: maintain some union-find data structure to identify locations in one heap
with locations in the other heap. Build the initial join state as follows:
- equate all locations that correspond to identical variables in both stacks, eg joining
stacks {x=1} and {x=2} adds "1=2" to the unification.
- add all addresses reachable from stack variables to the join state heap
This gives us an abstract state that is the union of both abstract states, but more states
can still be made equal. For instance, if 1 points to 3 in the first heap and 2 points to 4
in the second heap and we deduced "1 = 2" from the stacks already (as in the example just
above) then we can deduce "3 = 4". Proceed in this fashion until no more equalities are
discovered, and return the abstract state where a canonical representative has been chosen
consistently for each equivalence class (this is what the union-find data structure gives
us). *)
```
Reviewed By: mbouaziz
Differential Revision: D10483978
fbshipit-source-id: f6ffd7528
Summary:
Instead of propagating a partial state give up the analysis of the
function entirely on error. The state after an error is mostly
non-sensical so until we know better just giving up makes sure the
analysis remains sensible and produce fewer spurious warnings.
Reviewed By: mbouaziz
Differential Revision: D10483979
fbshipit-source-id: 171ec8469
Summary: Since we only care about reachability, drop the interpreter and just fold over all instructions in the procdesc.
Reviewed By: mbouaziz
Differential Revision: D10461783
fbshipit-source-id: 3e0b42a48
Summary: We don't need the machinery of HIL, or its complexity for this analysis.
Reviewed By: ddino
Differential Revision: D10461641
fbshipit-source-id: 2e7d3ab8e
Summary: First version of an analyzer collecting classes transitively touched.
Reviewed By: mbouaziz
Differential Revision: D10448025
fbshipit-source-id: 0ddfefd46
Summary: Even though we recognize the lock/unlock methods of various classes in C++, to report we insist that the class must have a `mutex` member. Equalize the two sets of types recognized.
Reviewed By: da319
Differential Revision: D10446527
fbshipit-source-id: f42ae1a35
Summary:
It avoids checking integer overflow when it definitely cannot happen.
For example, it does not check integer overflow of addition when one
of parameters is a negative number, or underflow of subtraction when
its first parameter is a positive number.
Reviewed By: mbouaziz
Differential Revision: D10446161
fbshipit-source-id: b8c86e1b2
Summary: We assume multiplication of 1 is safe. It happens sometimes by multiplying `sizeof(char)`.
Reviewed By: mbouaziz
Differential Revision: D10444680
fbshipit-source-id: 2f33be280
Summary: This diff changes pp of binary operation condition in order to avoid a `make test` failure. For the same `uint64_t` type, it is translated to `unsigned long long` in 64bit mac, but `unsigned long` in 64bit linux, which made a `make test` failure.
Reviewed By: mbouaziz
Differential Revision: D10459466
fbshipit-source-id: 449ab548e
Summary:
`Location` was clashing with the `Location` module, so use `Address`
instead.
When invalidating an address, remember the "actor" of its invalidation,
i.e. the access expression leading to the address and the source
location of the corresponding instruction.
When checking accesses, also pass the actor responsible for the access,
so that when we raise an error we know:
1. when and why a location was invalidated
2. when and why we tried to read it after that
Reviewed By: mbouaziz
Differential Revision: D10446282
fbshipit-source-id: 3ca4fb3d4
Summary:
Model `x[y]` and `x.push_back(i)` to catch the classic bug of "take
reference inside vector, invalidate, then use again".
Reviewed By: da319
Differential Revision: D10445824
fbshipit-source-id: 21ffd9677
Summary:
Do the intersection of the heap and stack domains, and the union of the
invalid location sets. This forgets invalid locations that appear only
in one heap, unfortunately. We can start with this and improve later.
Reviewed By: mbouaziz
Differential Revision: D10445825
fbshipit-source-id: cc24460af
Summary:
It gets built-in integer type widths of C from the clang plugin. For Java, it uses fixed widths.
The controller you requested could not be found.: facebook-clang-plugins
Reviewed By: jvillard
Differential Revision: D10397409
fbshipit-source-id: 73958742e
Summary:
Store the correct version of the proc desc into the DB when specialising
it. This doesn't seem to be used but is useful for investigating after
the fact (eg, if we could print individual cfgs).
Reviewed By: mbouaziz
Differential Revision: D10380708
fbshipit-source-id: fd72dbfc2
Summary:
New analysis in foetal form to detect invalid use of C++ objects after their
lifetime has ended. For now it has:
- A domain consisting of a graph of abstract locations representing the heap, a map from program variables to abstract locations representing the stack, and a set of locations known to be invalid (their lifetime has ended)
- The heap graph is unfolded lazily when we resolve accesses to the heap down to an abstract location. When we traverse a memory location we check that it's not known to be invalid.
- A simple transfer function reads and updates the stack and heap in a rudimentary way for now
- C++ `delete` is modeled as adding the location that its argument resolves to to the set of invalid locations
- Also, the domain has a really crappy join and widening for now (see comments in the code)
With this we already pass most of the "use after delete" tests from the
Ownership checker. The ones we don't pass are only because we are missing
models.
Reviewed By: mbouaziz
Differential Revision: D10383249
fbshipit-source-id: f414664cb
Summary:
In some error paths we may end up querying the state for the instruction
being executed, but that is only populated by biabduction. Now it's
populated by AI checkers too.
Reviewed By: jberdine
Differential Revision: D10381068
fbshipit-source-id: dca1325d7
Summary:
When the backend crashes we print which instruction/file/... we were analysing,
but because of recursion we can end up repeating that information all
the way to the toplevel call.
This makes sure we only print the innermost one, we don't care about the
calling context because the analysis is compositional.
Reviewed By: mbouaziz
Differential Revision: D10381141
fbshipit-source-id: 1c92bb861
Summary:
Trace events would crash when infer subprocesses were spawned by the build
system because they didn't detect if the file was already initialised
correctly.
Also trace the clang capture.
Reviewed By: mbouaziz
Differential Revision: D10380745
fbshipit-source-id: 76e1d4d7e
Summary:
It avoids raising an exception when unexpected arguments are given to
placement new. We will revert this after fixing the frontend to parse
user defined `new` correctly in the future.
Reviewed By: mbouaziz
Differential Revision: D10378136
fbshipit-source-id: d494f781b
Summary:
Use same code for deciding whether two accesses conflict across java/clang, by adapting that of the clang version.
Eliminate/simplify some code.
Reviewed By: mbouaziz, jberdine
Differential Revision: D10217383
fbshipit-source-id: dc0986d05
Summary:
It unsets `var_exp_typ` of `trans_state` during the translations of
placement parameters, so they are translated independently against the
target variable and class of the `new` function.
Reviewed By: mbouaziz, jvillard
Differential Revision: D10161419
fbshipit-source-id: 7f588a91c
Summary: It enables placement_new to get three parameters, which happens when placement_new is overloaded (e.g. Boost).
Reviewed By: mbouaziz
Differential Revision: D10100324
fbshipit-source-id: 0ecb0a404
Summary:
Using debugging on uninit raised an exception. A file was opened twice and closed twice.
This happened because the two abstract interpreters (SIL, LowerHIL) conflicted.
Let's use the LowerHIL-AI directly
Reviewed By: jvillard
Differential Revision: D10126442
fbshipit-source-id: 113c9e131
Summary:
Load proc descs from the "procedures" sqlite table instead of from
file-wide cfgs stored in the "source_files" table. This removes the need
for a cache of these file-wide CFGs, which was needed because loading
them is expensive and potentially needed in case we need to load the
proc descs of several procedures in the same file. Now we can just load
the proc descs one by one and not worry about caching.
Reviewed By: jberdine
Differential Revision: D10173355
fbshipit-source-id: 665636121
Summary:
Fix the logic for computing duplicate symbols. It was broken at some point and some duplicate symbols creeped into our tests. Fix these, and add a test to avoid duplicate symbols detection to regress again.
Also, this removes one use of `Cfg.load`, on the way to removing file-wide CFGs from the database.
Reviewed By: ngorogiannis
Differential Revision: D10173349
fbshipit-source-id: a0d2365b3
Summary:
First step: record the proc desc of each procedure in the "procedures"
table. Update them according to the attributes logic. Bonus: this
proc-desc for a procedure is now always in sync with its attributes.
For now nothing uses these per-procedure cfgs. Later diffs make more and
more use of them and eventually kill off file-wide CFGs from the
database.
Reviewed By: jberdine
Differential Revision: D10173350
fbshipit-source-id: b6d222bee
Summary:
There's nothing to analyse for declared procedures, and if there is then
that's because they are defined outside the source file and should not
be analysed unless ondemand needs them.
Reviewed By: ngorogiannis
Differential Revision: D10173353
fbshipit-source-id: 39c42eb7a
Summary:
In a future commit `Attributes` will depend on `Procdesc` and that
creates a cycle for the functions concerned with specialising proc
descs, which need `Attributes`.
Reviewed By: jberdine
Differential Revision: D10173354
fbshipit-source-id: 6c4ff82f0
Summary: The Nullsafe checker integration is filtering out the pre-existing warnings based on the bug hash only. However, there was a typo in the regexp and the bug hash for methods in anonymous classes was then depending on the name (in the bytecode) of the anonymous class, i.e. depending on the `N` in `ClassName$N.methodName()` where `N` is the occurrence of the anonymous class in `ClassName`. As a consequence, introducing a new anonymous class in a file was leading to all the reports in the subsequent anonymous classes to be marked as introduced.
Reviewed By: jberdine
Differential Revision: D10186651
fbshipit-source-id: 42e27c132
Summary:
An order constraint (A,B) means we take lock A and before releasing it we perform B (whatever that is).
Previously if a method call crossed class boundaries, we removed the callee's order constraints before integrating the callee's summary to that of the caller. The reasoning was that this may lead to reports blaming a caller for something they are very far from, plus a proliferation of reports with the same bad endpoint.
The first reason still applies, but this is a general problem. It may be better to report and let developers deal with it.
The second reason is moot, since in differential mode most of these reports are hidden.
Reviewed By: jberdine
Differential Revision: D10173200
fbshipit-source-id: 9afbf292c
Summary:
Instead of many successive implicit transactions to write each
attributes of the procedures in a file, write them all in a single
transaction.
Reviewed By: jberdine
Differential Revision: D10173351
fbshipit-source-id: 5f2a5ffb5
Summary: It uses big int, instead of 63bits int of OCaml, in the interval domain in order to get preciser numeric values in the future.
Reviewed By: jvillard
Differential Revision: D10123364
fbshipit-source-id: c217f4366
Summary:
Before storing attributes to disk, we fix their location information if needed.
Ideally we wouldn't be creating bogus attributes but sometimes the frontends
are built in a way that makes it difficult to do otherwise, thus we have to
live with this. However, what's aggravating is that attributes are also saved
in the proc descs of these procedures but in their wrong version. This makes
the two versions (inside the procedures sqlite table and inside the procdesc in
the cfg of the source_files table) agree.
Reviewed By: jeremydubreil
Differential Revision: D10084708
fbshipit-source-id: 5bfd5da3a
Summary:
Make distinct reports on strict mode violations.
For now, restrict to direct violations (UI threads calls transitively a violating method).
Will assess impact and enable indirect reports later (via locks).
Reviewed By: mbouaziz
Differential Revision: D10126780
fbshipit-source-id: 9c75930bc
Summary: Option is not needed, just set `default` record to agree with function default arguments.
Reviewed By: da319
Differential Revision: D10050463
fbshipit-source-id: e7d13bbd5
Summary:
The 2nd iteration of analysis of the Android core implementation did not yield actionable models, so delete those.
Turn on strict-mode reporting by default, when doing starvation analysis (which is disabled by default).
Reviewed By: jvillard
Differential Revision: D9991448
fbshipit-source-id: 67504591d
Summary:
New clang in the plugin \o/
Changes that were needed:
- (minor) Some extra AST nodes
- defining a lambda and calling it in the same line (`[&x]() { x = 1; }()`) used to get translated as a call of the literal but now an intermediate variable gets created, which confuses uninit in one test. I added another test to showcase the limitation this is hitting: storing the lambda in a variable then calling it will not get caught by the checker.
The controller you requested could not be found.: facebook-clang-plugins
Reviewed By: jeremydubreil
Differential Revision: D10128626
fbshipit-source-id: 8ffd19f3c
Summary: Before this diff, the analysis would only lookup the attributes with the classname appearing in the instruction. However, it would fail to find those attributes for inherited and not overridden methods. With this diff, the attributes are now searched recursively in the super classes.
Reviewed By: mbouaziz
Differential Revision: D10007469
fbshipit-source-id: 77d721cba
Summary: We may want to use these traces more generally, so put them into their own module.
Reviewed By: mbouaziz
Differential Revision: D10084404
fbshipit-source-id: 8f87c17f4
Summary: This fixes some cases of false positives where the analysis will compare with the wrong overridden methods. This could later be improved with the possibility to do sub-typing comparison on the parameters.
Reviewed By: ngorogiannis
Differential Revision: D9985249
fbshipit-source-id: 7998d8619
Summary:
Sometimes the default timeout of 10s is not enough(!). Make it
configurable while we work on not hitting it anyway.
Reviewed By: da319
Differential Revision: D10083772
fbshipit-source-id: ab949039f
Summary:
Keep `--analyzer` around for now for integrations that depend on it.
Also deprecate the `--infer-blacklist-path-regex`,
`--checkers-blacklist-path-regex`, etc. in favour of
`--report-blacklist-path-regex` which more accurately represents what these do
as of now.
Rely on the current subcommand instead of the analyzer where needed, as most of
the code already does.
Reviewed By: jeremydubreil
Differential Revision: D9942809
fbshipit-source-id: 9380e6036
Summary: If we get to that point, it means we already want to run the analysis so no need for this check.
Reviewed By: mbouaziz
Differential Revision: D9942702
fbshipit-source-id: e89e22c91
Summary:
Goal of the stack: deprecate the `--analyzer` option in favour of turning
individual features on and off. This option is a mess: some of the options are
now subcommands (compile, capture), others are aliases (infer and checkers),
and they can all be replicated using some straightforward combination of other
options.
This diff: stop using `--analyzer` in tests. It's mostly `checkers` everywhere,
which is already the default. `linters` becomes `--no-capture --linters-only`.
`infer` is supposed to be `checkers` already. `crashcontext` is
`--crashcontext-only`.
Reviewed By: mbouaziz
Differential Revision: D9942689
fbshipit-source-id: 048281761
Summary: Use the value of other options instead since we're trying to get rid of it. This should be equivalent.
Reviewed By: jeremydubreil
Differential Revision: D9943274
fbshipit-source-id: 055e1bdd2
Summary: It is common on Android code to recycle the `View` object by nullifying them in the `onDestroy()` or `onDestroyView()` methods. In this case, the outer `Fragment` object structure is preserve while the inner `View` object are set to null for the garbage collect to release the memory. However, if the fields are only set to `null` in the `onDestroy*()` methods, those fields cannot be `null` during the active lifecycle of the `Fragment`, so it is not necessary to annotate those fields with `Nullable`.
Reviewed By: mbouaziz
Differential Revision: D10024458
fbshipit-source-id: b05e538d9
Summary:
The method matcher is now used sufficiently it warrants refactoring out into its own module.
Also, kill dev-android-strict-mode and leave starvation-strict-mode as the stronger option.
Reviewed By: jeremydubreil
Differential Revision: D9990753
fbshipit-source-id: 626a70a19
Summary:
This allows infer devs to see the effects their changes have on the infer manuals.
Check in the manuals for each subcommand + the output of `--help-full` to get a
complete picture. If this is too annoying we can also check in only
`--help-full`.
Reviewed By: mbouaziz
Differential Revision: D9916404
fbshipit-source-id: b981e2c33
Sungkeun Cho
Mehdi Bouaziz
Dino Distefano
Jules Villard
Nikos Gorogiannis
Jeremy Dubreil
Daiva Naudziuniene
Martin Trojer
Ezgi Çiçek
Josh Berdine
Julian Sutherland