Summary:
This diff evaluates a cpp vector given as a parameter symbolically. Especially, it addresses it as an array, so the cost checker can use its symbolic length correctly.
**About handling `cpp.vector_elem` field:**
The field is a virtual field of vector object that points to the array of vector elements. It was introduced in Inferbo to model semantics of vector operations.
Since many semantics of Inferbo depends on type information, it had collected type information of vector elements, whenever `cpp.vector_elem` field was introduced, as a *side-effect*. A problem is that it has *side-effect*, which means it may introduce non-deterministic analysis results depending on the type information of the virtual field.
This diff changes it not to collect the type information on `cpp.vector_elem` as a side-effect. Instead, it tries to write the information to the abstract states (abstract location) when possible.
Reviewed By: ezgicicek
Differential Revision: D27674935
fbshipit-source-id: f3d52cae7
Summary:
Whenever an equality "t = v" (t an arbitrary term, v a variable) is
added (or "v = t"), remember the "t -> v" mapping after canonicalising t
and v. Use this to detect when two variables are equal to the same term:
`t = v` and `t = v'` now yields `v = v'` to be added to the equality
relation of variables. This increases the precision of the arithmetic
engine.
Interestingly, the impact on most code I've tried is:
1. mostly same perfs as before, if a bit slower (could be within noise)
2. slightly more (latent) bugs reported in absolute numbers
I would have expected it to be more expensive and yield fewer bugs (as
fewer false positives), but there could be second-order effects at play
here where we get more coverage. We definitely get more latent issues
due to dereferencing pointers after testing nullness, as can be seen in
the unit tests as well, which may alone explain (2).
There's some complexity when adding term equalities where the term
is linear, as we also need to add it to `linear_eqs` but `term_eqs` and
`linear_eqs` are interested in slightly different normal forms.
Reviewed By: skcho
Differential Revision: D27331336
fbshipit-source-id: 7314e127a
Summary:
When we don't know the value being shifted it may help to translate
bit-shifting into multiplication by a constant as it might surface
linear terms, eg `x<<1` is `2*x`.
Reviewed By: skcho
Differential Revision: D27464847
fbshipit-source-id: 9b3b5f0d0
Summary:
On some pathological examples of crypto primitives like libsodium, later
diffs make pulse grind to a halt due to an explosion in the size of
literals. This is at least partly due to the fact the arithmetic doesn't
operate modulo 2^64.
Due to the fact the arithmetic is confused in any case when we reach
such large numbers, cap them, currently at 2^128. This removes pathological
cases for now, even now on libsodium Pulse is ~5 times faster than before!
Take this opportunity to put the modified Q/Z modules in the own files.
Reviewed By: jberdine
Differential Revision: D27463933
fbshipit-source-id: 342d941e2
Summary:
This was added in C++14. Was investigating how SIOF dealt with this but
it turns out it already does the right thing as the translation unit of
global variable templates shows up as the place they are instantiated
(not the one where they are declared), which works well for SIOF
checking.
Reviewed By: da319
Differential Revision: D27500998
fbshipit-source-id: b8b9b9c48
Summary:
The title
Also notice that there is a duplication of an error.
Reviewed By: skcho
Differential Revision: D27426933
fbshipit-source-id: dbd2f861a
Summary:
See updated tests and code comments: this changes many arithmetic
operations to detect when a contradiction "p|->- * p=0" is about to be
detected, and generate a latent issue instead. It's hacky but it does
what we want. Many APIs change because of this so there's some code
churn but the overall end result is not much worse thanks to monadic
operators.
Reviewed By: skcho
Differential Revision: D26918553
fbshipit-source-id: da2abc652
Summary:
This diff handles live variables in catch blocks. To do that, this diff adds another metadata,
`CatchEntry`.
Domain change: The domain is changed to
```
(normal:variables) x (exn:try_id->variables)
```
`exn` is a map from try-catch-id to a set of live variables that are live at the corresponding entry
of catch blocks.
Semantics change: It is a backward analysis.
* on `CatchEntry`: It updates `exn` with `try_id` and current `normal`.
* on `Call`: As of now, we assume all function calls can raise an exception. Therefore, it copies
all live variables in `exn` to `normal`.
* on `TryEntry`: It removes corresponding `try_id` from `exn`.
Reviewed By: jvillard
Differential Revision: D26952755
fbshipit-source-id: 1da854a89
Summary: This diff adds TryEntry and TryExit statements to the entry and exit of C++ `try` block, in order to handle exceptional control flow better in analyses.
Reviewed By: da319, jvillard
Differential Revision: D26946188
fbshipit-source-id: 33f4ae9e7
Summary:
Update Infer to LLVM (clang) 11.1.0.
Infer/clang now uses the LLVM 'monorepo' release, simplifying the download script.
Some changes done to how/when ASTExporter mangles names, this to avoid the
plugin hitting asserts in the clang code when mangling names.
Reviewed By: jvillard
Differential Revision: D27006986
fbshipit-source-id: 4d4b6ba05
Summary:
Adapting error messages in Pulse so that they become more intuitive for
developers.
Reviewed By: jvillard
Differential Revision: D26887140
fbshipit-source-id: 896970ba2
Summary:
See added tests. Passing a variable by reference to a function `foo` can
cause the variable to be added to the global state so any stores after
that might be live as long as there is another function call after the
store (since the global state shouldn't outlive the scope of the
function). Currently we don't check that the latter is true; to report
these we would need to extend the abstract domain to remember which
stores have been made without a subsequent call.
Also change Blacklisted -> Dangerous everywhere since the corresponding
option is called "liveness_dangerous_classes".
Reviewed By: skcho
Differential Revision: D26606151
fbshipit-source-id: e869e5df1
Summary:
This resolves a few instances of false negatives; typically:
```
if (x == y) {
// HERE
*x = 10;
*y = 44;
// THERE
}
```
We used to get
```
HERE: &x->v * &y ->v' * v == v'
THERE: &x->v * &y ->v' * v == v' * v |-> 10 * v' |-> 44
```
The state at THERE was thus inconsistent and detected as such (v` and
`v'` are allocated separately in the heap hence cannot be equal).
Now we normalize the state more eagerly and so we get:
```
HERE: &x->v * &y->v
THERE: &x->v * &y->v * v |-> 44
```
Reviewed By: skcho
Differential Revision: D26488377
fbshipit-source-id: 568e685f0
Summary:
These were present for `std::optional` but not `folly::Optional` for
some reason.
Reviewed By: da319
Differential Revision: D26450400
fbshipit-source-id: 45051e828
Summary:
The `--pulse-model-return-nonnull` config option currently works for C++. Now we
will be using it also for Java. Changing type from string list to regexp to
make it more general.
Reviewed By: ezgicicek
Differential Revision: D26367888
fbshipit-source-id: 9a06b9b32
Summary: D25952894 (1bce54aaf3) changes translation of struct assignments. This diff adopts to this change for loads from global struct arrays.
Reviewed By: skcho
Differential Revision: D26398627
fbshipit-source-id: cc1fb47ab
Summary:
Before this diff:
```
// Summary of const global
// { global -> v }
n$0 =* global
// n$0 -> {global}
x *= n$0
// x -> {global}
```
However, this is incorrect because we expect `x` have `v` instead of the abstract location of `global`.
To fix the issue, this diff lookups the initializer summary when `global` is evaluated as RHS of load statement.
After this diff:
```
// Summary of const global
// { global -> v }
n$0 =* global
// n$0 -> v
x *= n$0
// x -> v
```
Reviewed By: ezgicicek
Differential Revision: D26369645
fbshipit-source-id: 98b1ed085
Summary:
Having different behaviours inter-procedurally and intra-procedurally
sounds like a bad design in retrospect. The model of free() should not
depend on whether we currently know the value is not null as that means
some specs are missing from the summary.
Reviewed By: skcho
Differential Revision: D26019712
fbshipit-source-id: 1ac4316a5
Summary:
When a single field struct is initialized with "type x{v}" form, the translated result is not straightforward. For example,
```
struct t {
int val_;
};
void foo(t x) {
t y{x};
}
```
calls the copy constructor with `x`. This is good.
```
void foo(int n) {
t y{n};
}
```
assigns the integer `n` to `y.val_`. This is good.
```
t get_v();
void foo() {
t y{get_v()};
}
```
assigns return value of `get_v` to `y.val_`, rather than calling the copy constructor. This is not
good, but doesn't matter for actual running; `&y.val_` is the same to `&y` and `t` value is the same
to `int` value.
Reviewed By: jvillard
Differential Revision: D26146578
fbshipit-source-id: 8a81bb1db
Summary: This diff fixes incorrect order of statements on `*p = !b;`.
Reviewed By: jvillard
Differential Revision: D26125069
fbshipit-source-id: 9dcefbd34
Summary:
This diff fixes incorrect order of statements on assignments.
In the translation of `LHS=RHS;`, if `RHS` is a complicated expression that introduced new nodes, eg a conditional expression, some load statements for `LHS` came after its usage. To avoid the issue, this diff forces it to introduce new nodes for `LHS`.
Reviewed By: jvillard
Differential Revision: D26099782
fbshipit-source-id: 27417cd99
Summary:
D20769039 (cec8cbeff2) added a preanalysis step that creates edges from throw nodes to all reachable catch nodes. It intended to fix some deadstore FPs however it caused more damage than the fix itself. In particular, throws were connected irrespective of
- the type of the exception
- whether the try was surrounded by a catch
This in turn caused weird CFGs with dangling and impossible to understand nodes:(
This diff reverts this change for now.
Instead, the fix should probably be done in the frontend where we have more information about try/catch blocks.
Reviewed By: da319
Differential Revision: D25997475
fbshipit-source-id: bbeabfbef
Summary:
Lambdas are essentially private (but are not marked as such in Infer),
so we should only report on their non-private callers.
Meanwhile, add a test to document that access propagation to those
callers is currently broken.
Reviewed By: da319
Differential Revision: D25944811
fbshipit-source-id: ef8ca6d9c
Summary:
We need to make sure a node is created to avoid instructions appearing
in the wrong order in the final CFG.
Reviewed By: da319
Differential Revision: D25784405
fbshipit-source-id: 3ef27d712
Summary: Model ` std::__optional_storage_base::has_value` as this is what we see in clang AST when translating `std::optional::has_value` for libc++. For libstdc++, we get `std::optional::has_value` as expected.
Reviewed By: skcho, jvillard
Differential Revision: D25585543
fbshipit-source-id: b8d9d2902
Summary:
Skipping the analysis of `std::vector::empty()` caused false positives: in the case where `std::vector::empty()` was called several times ("returning" different values each time), we were not able to prune infeasible paths.
Model `std::vector::empty()` as returning the same value every time it is called.
Reviewed By: ezgicicek
Differential Revision: D23904704
fbshipit-source-id: 52e8a2451
Summary:
This diff adds uninitialized value check in pulse. For now, it supports only simple cases,
- declared variables with a type of integer, float, void, and pointer
- malloced pointer variables that points to integer, float, void, and pointer
TODOs: I will add more cases in the following diffs.
- declared/malloced array
- declared/malloced struct
- inter-procedural checking
Reviewed By: jvillard
Differential Revision: D25269073
fbshipit-source-id: 317df9a85
Summary:
Previously, impurity analysis only collected one access for a single modification but not all other modifying accesses. This diff
- changes the impurity domain to collect all modifying accesses
- tracks and prints all the accesses seen to reach the modification, improving readability&debugging
Recording all accesses are needed in the next diff to determine if a method modifies any immutable fields. To determine that, we need to know all modifications, not just a single one.
Reviewed By: skcho
Differential Revision: D25186516
fbshipit-source-id: 43ceb3cd8
Summary: To look for captured variable address escape we should only check the validity of the addresses captured by reference. Checking the validity of the address captured by value can cause nullptr dereference false positives.
Reviewed By: jvillard
Differential Revision: D25219347
fbshipit-source-id: faf6f2b00
Summary:
This was left as a TODO before: where to place calls to destructors for
C++ temporaries that are only conditionally creating when evaluating an
expression. This can happen inside the branches of a conditional
operation `b?e:f` or in potentially-short-circuited conditions on the
righ-hand side of `&&` and `||` operators.
Following the compilation scheme of clang (observed by looking at the
generated LLVM bitcode), we instrument the program with "marker"
variables, so that for instance `X x = true?X():y;` becomes (following
the execution on the true branch):
```
marker1 = 0; // initialize all markers to 0
PRUNE(true) // entering true branch
X::X(&temporary); // create temporary...
marker1 = 1; // ...triggers setting its marker to 1
X::X(&x, &temporary); // finish expression
if (marker1) {
X::~X(&temporary); // conditionally destroy the temporary
}
```
In this diff, you'll find code for:
- associating markers to temporaries that need them
- code to initialize markers to 0 before full-expressions
- code to conditionally destroy temporaries based on the values of the
markers once the full-expression has finished evaluating
Reviewed By: da319
Differential Revision: D24954070
fbshipit-source-id: cf15df7f7
Summary:
The translation of `switch` cases needs to insert nodes around the
translation of each `case` sub-statement, so we need to force node
creation in these sub-statements so the nodes around it can be connected
to the translation of the sub-statements.
Also added more logging I found useful when debugging that.
Reviewed By: da319
Differential Revision: D24991455
fbshipit-source-id: d3a622142
Summary:
Split the translation of return more aggressively between:
1. the instruction that has to happen before the translation of the sub-expr
2. the sub-expr
3. the instruction that has to happen after the sub-expr
This is needed for the next diff which creates potentially large CFGs in
(2).
Reviewed By: da319
Differential Revision: D24954071
fbshipit-source-id: a7e7e2527
Summary: Model `folly::Optional::get_pointer` which returns an address to a value if exists or `nullptr` if empty.
Reviewed By: jvillard
Differential Revision: D24935677
fbshipit-source-id: 9d990fe07
Summary:
We deliberately stopped as soon as an error was detected when applying a
function call. This is not good as other pre/posts of the function may
apply cleanly, which would allow us to cover more behaviours of the
code.
Went on a bit of a refactoring tangeant while fixing this, to clarify
the `Ok None`/`Ok Some _`/`Error _` datatype returned by PulseInterproc.
Now we report errors as soon as we find them during function calls but
continue accumulating specs afterwards.
Reviewed By: da319
Differential Revision: D24888768
fbshipit-source-id: d5f2c29d7
Summary:
Communicate new facts from the arithmetic domain to the memory domain to
detect contradictions between the two.
Reviewed By: jberdine
Differential Revision: D24832079
fbshipit-source-id: 2caf8e9af
Summary:
This is several inter-connected changes together to keep the tests
happy.
The ConditionalOperator `b?t:e` is translated by first creating a
placeholder variable to temporarily store the result of the evaluation
in each branch, then the real thing we want to assign to reads that
variable. But, there are situations where that changes the semantics of
the expression, namely when the value created is a struct on the stack
(eg, a C++ temporary). This is because in SIL we cannot assign the
*address* of a program variable, only its contents, so by the time we're
out of the conditional operator we cannot set the struct value
correctly anymore: we can only set its content, which we did, but that
results in a "shifted" struct value that is one dereference away from
where it should be.
So a batch of changes concern `conditionalOperator_trans`:
- instead of systematically creating a temporary for the conditional,
use the `trans_state.var_exp_typ` provided from above if available
when translating `ConditionalOperator`
- don't even set anything if that variable was already initialized by
merely translating the branch expression, eg when it's a constructor
- fix long-standing TODO to propagate these initialization facts
accurately for ConditionalOperator (used by `init_expr_trans` to also
figure out if it should insert a store to the variable being
initialised or not)
The rest of the changes adapt some relevant other constructs to deal
with conditionalOperator properly now that it can set the current
variable itself, instead of storing stuff inside a temp variable. This
change was a problem because some constructs, eg a variable declaration,
will insert nodes that set up the variable before calling its
initialization, and now the initialization happens *before* that setup,
in the translation of the inner conditional operator, which naturally
creates nodes above the current one.
- add a generic helper to force a sequential order between two
translation results, forcing node creation if necessary
- use that in `init_expr_trans` and `cxxNewExpr_trans`
- adjust many places where `var_exp_typ` was incorrectly not reset when translating sub-expressions
The sequentiality business creates more nodes when used, and the
conditionalOperator business uses fewer temporary variables, so the
frontend results change quite a bit.
Note that biabduction tests were invaluable in debugging this. There
could be other constructs to adjust similarly to cxxNewExpr that were
not covered by the tests though.
Added tests in pulse that exercises the previous bug.
Reviewed By: da319
Differential Revision: D24796282
fbshipit-source-id: 0790c8d17
Summary: We recently introduced a more precise model for constructing an optional from a value by making a shallow copy. However, this introduced Use After Delete false positives. For now, we go back to a less precise model by creating a fresh value. A proper model would be to either make a deep copy or call the copy constructor for a value. We will address this in the following diff.
Reviewed By: jvillard
Differential Revision: D24826749
fbshipit-source-id: 3e5e4edeb
Summary: Refactor `folly::Optional` models to make them easier to reuse for `std::optional`
Reviewed By: jvillard
Differential Revision: D24760053
fbshipit-source-id: f665e84c8
Sungkeun Cho
Jules Villard
Daiva Naudziuniene
Martin Trojer
Gabriela Cunha Sampaio
Ezgi Çiçek
Nikos Gorogiannis
Joscha Benz