Summary:
Don't store redundant information in C++ template Type.Name.t.
New signature:
```
| CppClass (qual_name, template_args)
```
For example, for `std::shared_ptr<int>`, will look like this:
```
| CppClass (["std", "shared_ptr"], Template [int])
```
While it used to be:
```
| CppClass (["std", "shared_ptr<int>"], Template (["std", "shared_ptr"], [int]))
```
Reviewed By: jberdine, mbouaziz
Differential Revision: D4834512
fbshipit-source-id: cb1c570
Summary:
Before we understood ownership, we needed this to avoid a mountain of Builder-related FP's.
Now that we have fairly sophisticated understanding of ownership, we can kill this hack.
Reviewed By: jaegs
Differential Revision: D4940238
fbshipit-source-id: 8d86e57
Summary:
Title.
The way types are printed is completely valid, but little weird for some C++ programmers:
`int const` - same as `const int`
`int * const` - pointer is `const`, value under it is not
`int const *` - pointer is not `const`, but the value is
`int const * const` - both pointer and value are const
Reviewed By: jberdine
Differential Revision: D4962180
fbshipit-source-id: dcb02e3
Summary:
Modify the type of `Exp.Sizeof ...` to include the value that the expression
evaluates to according to the compiler, or None if it cannot be known
statically.
Use this information in inferbo.
Mostly unused in the BiAbduction checker for now, although it could be useful
there too.
update-submodule: facebook-clang-plugins
Reviewed By: mbouaziz
Differential Revision: D4953634
fbshipit-source-id: be0999d
Summary:
- Use Logging for logging
- Add a few extra debug (not ON by default)
- No space before colon
Depends on D4961957
Reviewed By: KihongHeo
Differential Revision: D4961989
fbshipit-source-id: 7c8697d
Summary: Sometimes reports need traces to be fully understood, but sometimes reporting where the exception takes place can save time to developers.
Reviewed By: jvillard
Differential Revision: D4914037
fbshipit-source-id: 039ab63
Summary: The purpose of the annotation reachability analysis is to report when a method annotated with `X` never calls, directly or indirectly, another method annotated with `Y`. However, there can be different call stacks following different execution paths from `X` to `Y`. Reporting more than one call stack ending with the same annotated procedure does not bring more signal to the end user. So the purpose of this diff is to avoid those duplicated reports and report at most one annotation reachability issue per end of call stack.
Reviewed By: sblackshear
Differential Revision: D4942765
fbshipit-source-id: 46325a7
Summary:
- Bottom-lift abstract memory domain to express unreachable node
- Two cases to make a node unreachable
+ constant: when an evaluation result of condition expression is
bottom or false, e.g., "prune(0)".
+ alias: when the same structure e is compared to itself with "<",
">", and "!=", e.g., "prune(e < e)".
- Add test for the new prune (prune_constant.c, prune_alias.c)
- Debug the semantics of comparison
Reviewed By: mbouaziz
Differential Revision: D4938055
fbshipit-source-id: d0fadf0
Summary:
As an interprocedural checker, SIOF should not run unless explicitly required.
Make it a new type of analyzer like other similar checkers.
Reviewed By: mbouaziz
Differential Revision: D4937820
fbshipit-source-id: a9e2d38
Summary: `bufferoverrun` is not part of `checkers` yet so bufferoverrun tests require their own Makefile
Reviewed By: jvillard
Differential Revision: D4937558
fbshipit-source-id: 20380f1
Summary: Sawja assigns them on multiple control-flow paths, so they're not SSA.
Reviewed By: peterogithub
Differential Revision: D4896745
fbshipit-source-id: c805216
Summary:
There are false positives in the current analysis due to the
use of conjunction in the treatment of threaded. Changing conjunction to disjunction
removes these false positives. Some new false negatives arise, but all the old tests pass.
This is a stopgap towards a better solution being planned.
Reviewed By: sblackshear
Differential Revision: D4883280
fbshipit-source-id: c2a7e6e
Summary:
Try to read .inferconfig in the current directory, then in .., then in ../..,
etc. This can be overriden with the `INFERCONFIG` environment variable.
This removes the need for two-phase parsing, so clean up that code too.
Paths in .inferconfig are interpreted relative to where .inferconfig is located.
This does not apply to other path-sensitive things like regexpes... this is not
a show stopper because regexpes can account for the fact that infer may be
called from different project roots.
Make sure we fail when .inferconfig exists but cannot be read.
Reviewed By: jberdine
Differential Revision: D4843142
fbshipit-source-id: 340a63f
Summary: The flakiness is exercised by upgrading the OCaml compiler to 4.04.0.
Reviewed By: jberdine
Differential Revision: D4859904
fbshipit-source-id: 0dd7ff6
Summary:
If we couldn't project the callee access path into the caller during summary application, we still added the corresponding trace to the caller state.
This was wasteful; it just bloats the caller with state it will never look at.
Fixed it by making `get_caller_ap_node` return `None` when the state won't be visible in the caller.
Reviewed By: jeremydubreil
Differential Revision: D4727937
fbshipit-source-id: 87665e9
Summary: This should make the reports much easier to understand. We can generalize to reporting a stack trace for all of the writes in the future if we wish.
Reviewed By: peterogithub
Differential Revision: D4845641
fbshipit-source-id: 589fdbc
Summary:
Make it possible to write one model which will be used by all template instantiations.
There is one big missing piece: infer never tries to do template instantiation by itself. With current code, it's possible to use generic models
as long as header contains `__infer_generic_model` annotation (see the test as an example).
This is not viable to modify all headers with this annotation hence infer will try to do template instantiation for generic models in later diffs.
Reviewed By: jberdine
Differential Revision: D4826365
fbshipit-source-id: 2233e42
Summary: If two public methods touch the same state and only one is marked `ThreadSafe`, it's reasonable to report unsafe accesses on both of them.
Reviewed By: peterogithub
Differential Revision: D4785038
fbshipit-source-id: 5a80da4
Summary: `__attribute__((annotate("")))` is better way of passing information to the frontend
Reviewed By: jberdine
Differential Revision: D4818805
fbshipit-source-id: 6e8add2
Summary:
*Unless* the unprotected write runs on the main thread and the read doesn't.
Otherwise, we'll already report on the unprotected write, and we don't want to duplicate.
Reviewed By: peterogithub
Differential Revision: D4798357
fbshipit-source-id: 5de06a0
Summary:
This is step further simplify the code to avoid cases where the summary of the procedure being analyzed can exist in two different versions:
# one version is the summary passed as parameter to every checker
# the other is a copy of the summary in the in-memory specs table
This diff implements:
# the analysis always run through the `Ondemand` module (was already the case before)
# the summary of the procedure being analyzed is created at the beginning of the on-demand analysis call
# all the checkers run in sequence, update their respective part of the payload and log errors to the error table
# the summary is store at the end of the on-demand analysis call
Reviewed By: sblackshear
Differential Revision: D4787414
fbshipit-source-id: 2d115c9
Summary:
Adds a new type and branching for a missing path of execution.
closes#575
Reviewed By: jvillard
Differential Revision: D4738681
fbshipit-source-id: f72344c
Summary:
Add support for Makefiles to the copyright linter. Makefiles are a bit
different than shell because they should start with the copyright notice
straight away (whereas shell starts with the #! stuff).
Reviewed By: mbouaziz
Differential Revision: D4786620
fbshipit-source-id: 504dc23
Summary:
It can be useful when debugging infer or the Makefiles themselves to see what
`make` is doing. Instead of editing Makefiles to remove `@` now you can `make
VERBOSE=1`.
This is just `git ls-files | grep -e Makefile -e '.*\.make' | xargs sed -e 's/^\t@/\t$(QUIET)/' -i`, and adding the definition of `QUIET` to Makefile.config.
Reviewed By: jeremydubreil
Differential Revision: D4779115
fbshipit-source-id: e6e4642
Mehdi Bouaziz
Andrzej Kotulski
Sam Blackshear
Jules Villard
Peter O'Hearn
Martino Luca
Jeremy Dubreil
Sungkeun Cho
Kihong Heo
Dino Distefano
Paco Estevez Garcia