Summary:
Better to bail early than have mysterious failures. These used to have the wrong error messages:
```
$ cd examples/android_hello/
$ infer -- ./gradlew rubbish
Capturing in gradle mode...
Running and capturing gradle compilation...
10:46:56.730 [ERROR] [org.gradle.internal.buildevents.BuildExceptionReporter]
10:46:56.730 [ERROR] [org.gradle.internal.buildevents.BuildExceptionReporter] FAILURE: Build failed with an exception.
10:46:56.730 [ERROR] [org.gradle.internal.buildevents.BuildExceptionReporter]
10:46:56.730 [ERROR] [org.gradle.internal.buildevents.BuildExceptionReporter] * What went wrong:
10:46:56.730 [ERROR] [org.gradle.internal.buildevents.BuildExceptionReporter] Task 'rubbish' not found in root project 'android_hello'.
10:46:56.730 [ERROR] [org.gradle.internal.buildevents.BuildExceptionReporter]
10:46:56.730 [ERROR] [org.gradle.internal.buildevents.BuildExceptionReporter] * Try:
10:46:56.730 [ERROR] [org.gradle.internal.buildevents.BuildExceptionReporter] Run gradlew tasks to get a list of available tasks. Run with --stacktrace option to get the stack trace.
Nothing to compile. Try running `./gradlew clean` first.
ERROR: (Unix.Exit_or_signal (Exit_non_zero 66))
$ cd -
$ infer --flavors --Xbuck --keep-going -- buck build //toto:toto
Capturing in buck mode...
moving files in buck-out to buck-out/.trash/buck-outwiiL6N
Not using buckd because watchman isn't installed.
BUILD FAILED: No build file at toto/BUCK when resolving target //toto:toto#infer.
Buck failed, but continuing the analysis because --keep-going was passed
Not using buckd because watchman isn't installed.
No build file at toto/BUCK when resolving target //toto:toto#infer.
Traceback (most recent call last):
File "/home/jul/infer/infer/bin/../lib/python/infer.py", line 186, in <module>
main()
File "/home/jul/infer/infer/bin/../lib/python/infer.py", line 168, in main
capture_exitcode = imported_module.gen_instance(args, cmd).capture()
File "/home/jul/infer/infer/lib/python/inferlib/capture/buck.py", line 89, in capture
return self.capture_with_flavors()
File "/home/jul/infer/infer/lib/python/inferlib/capture/buck.py", line 242, in capture_with_flavors
result_paths = self._get_analysis_result_paths()
File "/home/jul/infer/infer/lib/python/inferlib/capture/buck.py", line 148, in _get_analysis_result_paths
out = [x.split(None, 1)[1] for x in buck_output.strip().split('\n')]
IndexError: list index out of range
ERROR: (Unix.Exit_or_signal (Exit_non_zero 1))
$ cd infer/build_systems/ant/ && infer -- ant rubbish
Capturing in ant mode...
BUILD FAILED
Target "rubbish" does not exist in the project "null".
at org.apache.tools.ant.Project.tsort(Project.java:1929)
at org.apache.tools.ant.Project.topoSort(Project.java:1837)
at org.apache.tools.ant.Project.topoSort(Project.java:1800)
at org.apache.tools.ant.Project.executeTarget(Project.java:1376)
at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
at org.apache.tools.ant.Project.executeTargets(Project.java:1260)
at org.apache.tools.ant.Main.runBuild(Main.java:857)
at org.apache.tools.ant.Main.startAnt(Main.java:236)
at org.apache.tools.ant.launch.Launcher.run(Launcher.java:287)
at org.apache.tools.ant.launch.Launcher.main(Launcher.java:113)
Total time: 0 seconds
Nothing to compile. Try running `ant clean` first.
ERROR: (Unix.Exit_or_signal (Exit_non_zero 66))
```
Now we fail better, for instance:
```
$ infer --flavors --Xbuck --keep-going -- buck build //toto:toto
Capturing in buck mode...
moving files in buck-out to buck-out/.trash/buck-outHag8Ji
Not using buckd because watchman isn't installed.
BUILD FAILED: No build file at toto/BUCK when resolving target //toto:toto#infer.
Buck failed, but continuing the analysis because --keep-going was passed
Not using buckd because watchman isn't installed.
No build file at toto/BUCK when resolving target //toto:toto#infer.
ERROR: (Unix.Exit_or_signal (Exit_non_zero 70))
$ cd infer/build_systems/ant/ && infer -- ant rubbish
Capturing in ant mode...
BUILD FAILED
Target "rubbish" does not exist in the project "null".
at org.apache.tools.ant.Project.tsort(Project.java:1929)
at org.apache.tools.ant.Project.topoSort(Project.java:1837)
at org.apache.tools.ant.Project.topoSort(Project.java:1800)
at org.apache.tools.ant.Project.executeTarget(Project.java:1376)
at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
at org.apache.tools.ant.Project.executeTargets(Project.java:1260)
at org.apache.tools.ant.Main.runBuild(Main.java:857)
at org.apache.tools.ant.Main.startAnt(Main.java:236)
at org.apache.tools.ant.launch.Launcher.run(Launcher.java:287)
at org.apache.tools.ant.launch.Launcher.main(Launcher.java:113)
Total time: 0 seconds
ERROR: couldn't run compilation command `['ant', '-verbose', u'rubbish']`
ERROR: (Unix.Exit_or_signal (Exit_non_zero 1))
```
Reviewed By: jeremydubreil
Differential Revision: D5469607
fbshipit-source-id: a3eb05c
Summary:
This reverts commit 7177bb6b8af1404fde408ead4750ef48ed9bdaff.
In practice, `extract_filepath` exhausts the call stack, leading to "RuntimeError: maximum recursion depth exceeded" exceptions. Perhaps a loop needs to be used instead.
Reviewed By: jvillard
Differential Revision: D5409892
fbshipit-source-id: 09ccccd
Summary:
Try and enforce the following rules:
- stderr is for updating the user about progress or errors
- Introduce Logging.progress that outputs to stderr, but honours --quiet
- Logging.stderr is as before
- Logging.out now prints to stderr (or to log files as before if set up) and
not stdout. If some information should go on stdout then the user should be
able to rely on it (ie, it's not just some progress message). For now only
the summary of the errors is printed on stdout by default.
- Logging.err* functions are gone. If the error is user-visible, it should be
Logging.stderr, or `failwith`. If not, go to the same log file as other
output, which personally I find much more convenient than having to dig through
2 log files every time I'm looking for some output.
Reviewed By: jberdine
Differential Revision: D5095720
fbshipit-source-id: 68999c9
Summary:
Python isn't needed anymore to pass options between `infer` and `InferClang`.
However, it is still needed to set up `PATH` so that we pick up compilation
commands.
Reviewed By: jberdine
Differential Revision: D4008469
fbshipit-source-id: 05c5716
Summary:
This changes executions of the former InferClang into a function call. In
particular, it can be called several times per execution.
The new InferClang must be called as if it was clang, and knows how to run
clang with our plugin to get the AST of the source file.
Reviewed By: akotulski
Differential Revision: D3981017
fbshipit-source-id: 7af6490
Summary:
- [python] decode strings coming from `os.*` commands
- [python] decode strings coming from the command-line
- [python] encode a few remaining unicodes into strings
- [java] replace lex/yacc parser for javac verbose output by regex-based matching to handle unicode in paths
- [make] random fix of `make test` to have `make clean test` work
- [integration tests] add e2e build integration tests for utf8 in the PWD
Closes#76
Reviewed By: martinoluca
Differential Revision: D3240809
fb-gh-sync-id: 8c2e1ed
fbshipit-source-id: 8c2e1ed
Summary:public
Models in headers are purely C++ concept and it's
useless if C++ mode is turned off. Since those
models can lead to compilation errors, turn them
off for non-C++ analysis
Reviewed By: martinoluca
Differential Revision: D3126294
fb-gh-sync-id: 0912e7b
fbshipit-source-id: 0912e7b
Summary:public
- s/"/'/ in python strings
- kill `utils.error()` in favour of the new, identical `utils.stderr()`
- one more `print(utils.encode())` to `utils.stderr()` conversion
Reviewed By: jeremydubreil
Differential Revision: D2976710
fb-gh-sync-id: 6c0fdfa
shipit-source-id: 6c0fdfa
Summary:public
This class expects a working `jwlib.CompilerCommand` even when we're not doing
anything Java-related. Split the java-specific functionality into a new child
class in jwlib.py.
Reviewed By: jeremydubreil
Differential Revision: D2965832
fb-gh-sync-id: e895b33
shipit-source-id: e895b33
Summary:public
java-specific code such as this belongs in jwlib.py. It will also help the
refactoring in the next diff.
Reviewed By: sblackshear
Differential Revision: D2965814
fb-gh-sync-id: c3adc03
shipit-source-id: c3adc03
Summary:public
This attempts to properly sanitise text input/output in the Python parts of
infer. Do three things:
- encode user input (coming from the command-line or reading files)
- decode infer output
- in both cases, we may be using the wrong encoding, eg: locale says we're in
ascii, but the source code contains utf-8. In many cases, like error
messages, it's safe to ignore these encoding mismatches.
Also, since we `import __future__.unicode_literals`, it's safe to remove `u'`
prefixes on many unicode literals.
Reviewed By: martinoluca
Differential Revision: D2960493
fb-gh-sync-id: 9812d7d
shipit-source-id: 9812d7d
Summary: public
This should avoid confusion between the toplevel "infer" python script and
inferlib/infer.py.
Reviewed By: jeremydubreil
Differential Revision: D2637087
fb-gh-sync-id: 82ce2a4
Summary: public
Print "Capturing..." message, and some info in case it fails, eg:
$ cd examples/android_hello/
$ infer -- ./gradlew build
Running and capturing gradle compilation...
[... stuff ...]
$ infer -- ./gradlew build
Running and capturing gradle compilation...
Nothing to compile. Try running `./gradlew clean` first.
Reviewed By: jeremydubreil
Differential Revision: D2637024
fb-gh-sync-id: 0e8867d
Summary: public
This unclutters infer/bin/ and gives more structure to infer/lib/
Reviewed By: jeremydubreil
Differential Revision: D2605809
fb-gh-sync-id: 508fc2c
Jules Villard
Josh Berdine
Alexander Slesarev
Andrzej Kotulski
Jeremy Dubreil
Dulma Rodriguez