Summary:
We need to make sure a node is created to avoid instructions appearing
in the wrong order in the final CFG.
Reviewed By: da319
Differential Revision: D25784405
fbshipit-source-id: 3ef27d712
Summary:
This was left as a TODO before: where to place calls to destructors for
C++ temporaries that are only conditionally creating when evaluating an
expression. This can happen inside the branches of a conditional
operation `b?e:f` or in potentially-short-circuited conditions on the
righ-hand side of `&&` and `||` operators.
Following the compilation scheme of clang (observed by looking at the
generated LLVM bitcode), we instrument the program with "marker"
variables, so that for instance `X x = true?X():y;` becomes (following
the execution on the true branch):
```
marker1 = 0; // initialize all markers to 0
PRUNE(true) // entering true branch
X::X(&temporary); // create temporary...
marker1 = 1; // ...triggers setting its marker to 1
X::X(&x, &temporary); // finish expression
if (marker1) {
X::~X(&temporary); // conditionally destroy the temporary
}
```
In this diff, you'll find code for:
- associating markers to temporaries that need them
- code to initialize markers to 0 before full-expressions
- code to conditionally destroy temporaries based on the values of the
markers once the full-expression has finished evaluating
Reviewed By: da319
Differential Revision: D24954070
fbshipit-source-id: cf15df7f7
Summary:
Split the translation of return more aggressively between:
1. the instruction that has to happen before the translation of the sub-expr
2. the sub-expr
3. the instruction that has to happen after the sub-expr
This is needed for the next diff which creates potentially large CFGs in
(2).
Reviewed By: da319
Differential Revision: D24954071
fbshipit-source-id: a7e7e2527
Summary:
This is several inter-connected changes together to keep the tests
happy.
The ConditionalOperator `b?t:e` is translated by first creating a
placeholder variable to temporarily store the result of the evaluation
in each branch, then the real thing we want to assign to reads that
variable. But, there are situations where that changes the semantics of
the expression, namely when the value created is a struct on the stack
(eg, a C++ temporary). This is because in SIL we cannot assign the
*address* of a program variable, only its contents, so by the time we're
out of the conditional operator we cannot set the struct value
correctly anymore: we can only set its content, which we did, but that
results in a "shifted" struct value that is one dereference away from
where it should be.
So a batch of changes concern `conditionalOperator_trans`:
- instead of systematically creating a temporary for the conditional,
use the `trans_state.var_exp_typ` provided from above if available
when translating `ConditionalOperator`
- don't even set anything if that variable was already initialized by
merely translating the branch expression, eg when it's a constructor
- fix long-standing TODO to propagate these initialization facts
accurately for ConditionalOperator (used by `init_expr_trans` to also
figure out if it should insert a store to the variable being
initialised or not)
The rest of the changes adapt some relevant other constructs to deal
with conditionalOperator properly now that it can set the current
variable itself, instead of storing stuff inside a temp variable. This
change was a problem because some constructs, eg a variable declaration,
will insert nodes that set up the variable before calling its
initialization, and now the initialization happens *before* that setup,
in the translation of the inner conditional operator, which naturally
creates nodes above the current one.
- add a generic helper to force a sequential order between two
translation results, forcing node creation if necessary
- use that in `init_expr_trans` and `cxxNewExpr_trans`
- adjust many places where `var_exp_typ` was incorrectly not reset when translating sub-expressions
The sequentiality business creates more nodes when used, and the
conditionalOperator business uses fewer temporary variables, so the
frontend results change quite a bit.
Note that biabduction tests were invaluable in debugging this. There
could be other constructs to adjust similarly to cxxNewExpr that were
not covered by the tests though.
Added tests in pulse that exercises the previous bug.
Reviewed By: da319
Differential Revision: D24796282
fbshipit-source-id: 0790c8d17
Summary:
We get duplicated variable declaration instruction for primitive type variable initialized using list initializer, e.g.
```
int* p{nullptr};
```
This happens because we add variable declaration instruction when we translate both `DeclStmt` and `InitListExpr`. To fix this, we do not add the duplicated variable declaration when we translate `InitListExpr`.
Reviewed By: jvillard
Differential Revision: D22844726
fbshipit-source-id: 422806924
Summary:
The directory names had some interesting variety due to historical
reasons.
- {c,cpp,objc,objcpp}/errors/ date from the time when infer was only
biabduction
- java/infer/ dates from the time when we had an "--analyzer" option and
"infer" was one of them (sic), and eg another was "eradicate".
- c/biabduction/ dates from the time when the biabduction analysis was
being migrated to the "checkers" (AI) framework. For some reasons the
tests there are not a subset of c/infer/ but seem to be entirely new
tests.
The convention now dictates that we should name all of these
*/biabduction/. This diff moves the existing tests from c/biabduction/
into c/biabduction/misc/.
Reviewed By: mityal
Differential Revision: D21300147
fbshipit-source-id: 516d1cb15
Summary:
It's easy to create large arrays in code, eg `int x[1UL << 16];`, but
these can generate huge nodes in SIL because zero-initialization is
translated by zero-ing structures element by element. Introduce a
builtin to use instead. Keep the naive method for small structures (with
a configurable limit on "small").
Reviewed By: dulmarod
Differential Revision: D20836836
fbshipit-source-id: 6bf5410f8
Summary:
This diff fixes the clang translation for switch statement. It assumed that `default:` comes always
at last, which introduced some unreachable nodes inadvertently, e.g. when `default:` comes at first.
Reviewed By: dulmarod
Differential Revision: D19793138
fbshipit-source-id: 1e8b52c0d
Summary: This diff captures global initializers ondemand, like we do for functions defined in headers.
Reviewed By: ezgicicek
Differential Revision: D19346947
fbshipit-source-id: 05174e6a4
Summary:
This also prints the CFGs *after* pre-analysis for individual procedures
in infer-out/captured/<filename>/<proc>.dot. One can also look up the
CFGs before pre-analysis in infer-out/captured/proc_cfgs_frontend.dot.
Context: I want to add a pre-analysis that needs to look at proc
attributes inter-procedurally. For this to make sense it has to happen
*after* all of capture, and before analysis.
Thus, this diff brings back the lazy running of the pre-analysis like in
D15803492, except that we still make sure to run the pre-analyses
systematically regardless of the checkers being run by running the
pre-analysis from ondemand.ml. Also we don't need to re-introduce the
"did_preanalysis" proc attribute for the same reason that the
pre-analysis is now run once and for all by ondemand.ml (instead of each
individual checker back in the days).
This has the benefit of running the pre-analysis only when needed, and
the drawback that several concurrent processes analysing the same proc
descs will duplicate work. Since pre-analyses are supposed to be very
fast I assume that neither is a big deal. If they become more expensive
then the benefit gets bigger and the drawback is just the same as with
regular analyses.
Reviewed By: skcho
Differential Revision: D18573920
fbshipit-source-id: de350eaef
Summary:
The previous code would call the destructor for the C++ temporary
*before* the prune nodes, which then try to dereference it. Wrong.
Quick fix: don't destroy temporaries in conditionals.
Reviewed By: mbouaziz
Differential Revision: D16030735
fbshipit-source-id: e11abad58
Summary: Inject destructor calls to destroy a temporary when its lifetime ends.
Reviewed By: mbouaziz
Differential Revision: D15674209
fbshipit-source-id: 0f783a906
Summary:
This started as an attempt to understand how to modify the frontend to
inject destructors for C++ temporaries (see next diffs).
This diff rewrites the existing logic for computing the list of
variables that should be destroyed at the end of each statement, either
because it's the end of their syntactic scope or because control flow
branches outside of their syntactic scope.
The frontend translates a function from the last instructions to the
first, but scope computation needs to be done in the other direction, so
it's done in a separate pass *before* the main translation happens. That
first pass creates a map from statements in the AST to the list of
variables that should be destroyed at the end of these statements. This
is still the case now.
Before, that map would be computed in a bit of a weird way: scopes are
naturally a stack but instead of that the structure maintained was a
flat list + a counter to know where the current scope ended in that
list.
In this diff, redo the computation maintaining a stack of scopes
instead, which is a bit cleaner. Also treat more instructions as
introducing a new scope, eg if, for, ...
Reviewed By: mbouaziz
Differential Revision: D15674208
fbshipit-source-id: c92429e82
Summary:
Somewhat trivial: add a string to "Destruction" nodes to indicate why
they were created. Rename the main `instruction_aux` function into
`instruction_translate` (see next diff for why).
Reviewed By: mbouaziz
Differential Revision: D15674211
fbshipit-source-id: 8a7eda72c
Summary:
The synthetic methods from `topl.Property` are now nonempty: they
simulate a nondeterministic automaton.
Reviewed By: jvillard
Differential Revision: D15668471
fbshipit-source-id: 050408283
Summary:
- take advantage more structured attributes in the exported AST
- circumvent new format of `if` and `switch`
- a few new features/nodes but nothing major there
update-submodule: facebook-clang-plugins
Reviewed By: mbouaziz, martintrojer
Differential Revision: D15453572
fbshipit-source-id: c0c24345f
Summary:
Instead of emitting an ad-hoc builtin on variable declaration emit a new
metadata instruction. This allows us to remove the code matching on that
ad-hoc builtin that had to be inserted in several checkers.
Inferbo & pulse used that information meaningfully and had to undergo
some minor changes to cope with the new metada instruction.
Reviewed By: ezgicicek
Differential Revision: D14833100
fbshipit-source-id: 9b3009d22
Summary:
This will be used in the future to determine what to do with destructors
in pulse.
Reviewed By: mbouaziz
Differential Revision: D14324759
fbshipit-source-id: bc3c34471
Summary:
Before, the liveness pre-analysis would place extra instructions in the
CFG for either:
1. marking an `Ident.t` as dead, or
2. marking a `Pvar.t` as `= 0`
But we have no way of marking pvars dead without setting them to 0. This
is bad because setting pvars to 0 is not possible everywhere they are
dead. Indeed, we only do it when we haven't seen their address being
taken anyway. This prevents the following situation, recorded in our tests:
```
int address_taken() {
int** x;
int* y;
int i = 7;
y = &i;
x = &y;
// if we don't reason about taken addresses while adding nullify instructions,
// we'll add
// `nullify(y)` here and report a false NPE on the next line
return **x;
}
```
So we want to mark pvars as dead without nullifying them. This diff
extends the `Remove_temps` SIL instruction to accept pvars as well, and
so renames it to `ExitScope`.
Reviewed By: da319
Differential Revision: D13102953
fbshipit-source-id: aa7f03a52
Summary:
Useful to understand the changes in the pre-analysis, or to inspect the
CFG that checkers actually get.
This means that the pre-analysis always runs when we output the dotty,
but I don't really see a reason why not. In fact, we could probably
*always* store the CFGs as pre-analysed.
Reviewed By: mbouaziz
Differential Revision: D13102952
fbshipit-source-id: 89f3102ec
Summary:
When initialising a variable via semi-exotic means, the frontend loses
the information that the variable was initialised. For instance, it
translates:
```
struct Foo { int i; };
...
Foo s = {42};
```
as:
```
s.i := 42
```
This can be confusing for backends that need to know that `s` actually
got initialised, eg pulse.
The solution implemented here is to insert of dummy call to
`__variable_initiazition`:
```
__variable_initialization(&s);
s.i := 42;
```
Then checkers can recognise that this builtin function does what its
name says.
Reviewed By: mbouaziz
Differential Revision: D12887122
fbshipit-source-id: 6e7214438
Summary:
In order to know whether a global variable is an integral constant
expression in C, this diff adds a field for the results of isInitICE.
The controller you requested could not be found.: facebook-clang-plugins
Reviewed By: mbouaziz
Differential Revision: D12838521
fbshipit-source-id: 388bff1f3
Summary:
It uses platform-dependent integer type widths information when
constructing Sizeof expressions which have a field(`nbytes`)
representing the static results of the evaluation of `sizeof(typ)`.
Reviewed By: mbouaziz
Differential Revision: D10504715
fbshipit-source-id: 0c79d37d8
Summary:
New clang in the plugin \o/
Changes that were needed:
- (minor) Some extra AST nodes
- defining a lambda and calling it in the same line (`[&x]() { x = 1; }()`) used to get translated as a call of the literal but now an intermediate variable gets created, which confuses uninit in one test. I added another test to showcase the limitation this is hitting: storing the lambda in a variable then calling it will not get caught by the checker.
The controller you requested could not be found.: facebook-clang-plugins
Reviewed By: jeremydubreil
Differential Revision: D10128626
fbshipit-source-id: 8ffd19f3c
Summary:
Change the license of the source code from BSD + PATENTS to MIT.
Change `checkCopyright` to reflect the new license and learn some new file
types.
Generated with:
```
git grep BSD | xargs -n 1 ./scripts/checkCopyright -i
```
Reviewed By: jeremydubreil, mbouaziz, jberdine
Differential Revision: D8071249
fbshipit-source-id: 97ca23a
Summary:
Labels inside switch statements were causing havoc (see test), and the translation of switch statements in general could be improved to handle more cases.
It turns out that `case` (and `default`) statements are more or less fancy labels into the code. In other words, if you erase all the `case XXX:` and `default:` strings in the `switch` statement you get the real structure of the program, and `switch` just jumps straight to the first `case` directives (and to the second if the first one is not satisfied, etc. until all `case`/`default` have been considered).
This suggests an alternative implementation: translate the body of the `switch` and simply record the list of switch cases inside that body, along with where they point to. Then post-process this list to construct the control flow of the `switch`, which points into the control-flow of the `body`. In order not to modify every function in `CTrans` to propagate the current list of cases, I created an ugly `ref` inside `SwitchCase` instead (but it cannot be directly accessed and it's guaranteed to be well-parenthesised wrt nested switches by the `SwitchCase` API so it's not too bad).
[unrelated] Also make translation failures output more information about what exactly in the source code is causing the crash, and the ancestors in the AST that lead to the crash site.
Reviewed By: martinoluca
Differential Revision: D8011046
fbshipit-source-id: 8455090
Summary:
Previously, the type of `trans_result` contained a list of SIL expressions.
However, most of the time we expect to get exactly one, and getting a different
number is a soft(!) error, usually returning `-1`.
This splits `trans_result` into `control`, which contains the information
needed for temporary computation (hence when we don't necessarily know the
return value yet), and a new version of `trans_result` that includes `control`,
the previous `exps` list but replaced by a single `return` expression instead,
and a couple other values that made sense to move out of `control`. This allows
some flexibility in the frontend compared to enforcing exactly one return
expression always: if they are not known yet we stick to `control` instead (see
eg `compute_controls_to_parent`).
This creates more garbage temporary identifiers, however they do not show up in
the final cfg. Instead, we see that temporary IDs are now often not
consecutive...
The most painful complication is in the treatment of `DeclRefExpr`, which was
actually returning *two* expressions: the method name and the `this` object.
Now the method name is a separate (optional) field in `trans_result`.
Reviewed By: mbouaziz
Differential Revision: D7881088
fbshipit-source-id: 41ad3b5
Summary:
This is an attempt to make things more consistent, and maybe save some work
from the `Format` module in case flambda doesn't have our backs.
Reviewed By: jberdine
Differential Revision: D7775496
fbshipit-source-id: 59a6314
Summary:
This simplifies the frontends and backends in most cases. Before this diff,
returning `void` could be modelled either with a `None` return, or a dummy
return variable with type `Tvoid`. Now it's always the latter.
Reviewed By: sblackshear, dulmarod
Differential Revision: D7832938
fbshipit-source-id: 0a403d1
Summary: Returning the list of sub-expressions is not right and can cause assertion failures elsewhere in the frontend.
Reviewed By: dulmarod
Differential Revision: D7813493
fbshipit-source-id: 33ac9c1
Summary:
When looking at large CFGs, at least in `xdot`, it's often difficult to find
the procedure you're looking for. Sorting the proc names puts them in
alphabetical order, which makes searching one procedure easier.
Reviewed By: mbouaziz
Differential Revision: D7758521
fbshipit-source-id: 8e9997f
Summary:
Switch to the current stable branch for clang.
update-submodule: facebook-clang-plugins
Reviewed By: mbouaziz
Differential Revision: D7067890
fbshipit-source-id: aedff90
Summary: We do not inject a destructor call if the destructor declaration does not contain a body in AST. We miss all the cases where the destructor is declared in `.h` file and defined in `.cpp` file as other files include `.h` file and do not contain the body of the destructor when destructor calls are being injected based on AST information. After this diff we inject destructor calls even if we do not have body for the destructor in AST.
Reviewed By: sblackshear
Differential Revision: D6796567
fbshipit-source-id: 1c187ec
Summary:
This diff fixes the translation of `new` and `placement new` with one argument. If `placement new` has more than one argument it means that it is user-defined (this will be addressed in another diff).
update-submodule: facebook-clang-plugins
Reviewed By: sblackshear, mbouaziz
Differential Revision: D6807751
fbshipit-source-id: 7cf0290
Summary:
Not sure what an "iCFG" is but the dotty is only about CFGs anyway.
Diff obtained by mass-`sed`.
Reviewed By: sblackshear
Differential Revision: D6324280
fbshipit-source-id: b7603bb
Summary:
This resolves#796 . Effectively it adds file specific suffix to name of all global initializers (so initializersof two global variable of the same name will have unique Typ.Procname). which is the same rule as currently used by constructing Procname for the static functions. However this change applies to initializers of all global variables and not just static (arguably it's a right thing. since GCC used to allow multiple global variables with the same name).
Consequences of this change that it becomes impossible to know name of generated initialization function of global ('extern') variables. However get_initializer_pname function is only referenced by the frontend (when creating initializer for the defined global variables) and by the SIOF checker.
Closes https://github.com/facebook/infer/pull/801
Reviewed By: jvillard
Differential Revision: D6335034
Pulled By: dulmarod
fbshipit-source-id: 1a92c08
Summary:
The previous domain for SIOF was duplicating some work with the generic Trace
domain, and basically was a bit confused and confusing. A sink was a set of
global accesses, and a state contains a set of sinks. Then the checker has to
needlessly jump through hoops to normalize this set of sets of accesses into a
set of accesses.
The new domain has one sink = one access, as suggested by sblackshear. This simplifies
a few things, and makes the dedup logic much easier: just grab the first report
of the list of reports for a function.
We only report on the fake procedures generated to initialise a global, and the
filtering means that we keep only one report per global.
Reviewed By: sblackshear
Differential Revision: D5932138
fbshipit-source-id: acb7285
Summary:
With this change and the previous facebook-clang-plugins change, infer no
longer exhausts the biniou buffer when reading the serialized C++ AST.
update-submodule: facebook-clang-plugins
Reviewed By: mbouaziz
Differential Revision: D5891081
fbshipit-source-id: cf48eac
Jules Villard
Daiva Naudziuniene
Sungkeun Cho
Martin Trojer
Josh Berdine
Radu Grigore
David Lively
Mehdi Bouaziz
Dulma Churchill
Ezgi Çiçek