Summary:
Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds:
```
times in 10ms, ±differences measured in speedups, 4 cores
| | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys |
|-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------|
| byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 |
| native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 |
| byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 |
| change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 |
| change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 |
| change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 |
| change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 |
| change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 |
| change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 |
#+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2
50 cores
| | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys |
|---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------|
| byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 |
| native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 |
| byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 |
#+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2
```
Menu:
1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in
some information at build-time (really, at configure time, but TODO), such as
whether or not clang is enabled.
2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file
3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help.
4. jbuilder does not support subdirectories, so resort to listing all the
source files in the generated jbuild (only source directories need to be
manually listed in jbuild.in though). Still, the generated .merlin is wrong
and makes merlin find source files in _build, so manually tune it to get
good merlin support. We also lose some of merlin for unit tests as it
cannot see their build artefacts anymore.
5. checkCopyright gets its own jbuild because it's standalone. Also, remove
some deprecation warnings in checkCopyright due to the new version of Core from
a while ago.
6. Drop less-used Makefile features (they had regressed anyway) such as
building individual modules. Also, building mod_dep.pdf now takes all the
source files available so they better build (before, it would only take the
source files from the config, eg with or without clang) (that's pretty minor).
7. The toplevel is now built as a custom toplevel because that was easier. It
should soon be even easier: https://github.com/janestreet/jbuilder/issues/210
8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about
interface files without implementations.
In particular, I did not try to migrate too much of the Makefile logic to jbuilder,
more can be done in the future.
Reviewed By: jberdine
Differential Revision: D5573661
fbshipit-source-id: 4ca6d8f
Summary:
Replace `inferTraceBugs` with `infer-explore` with a similar CLI. Some options changed:
- --max-level -> --max-nesting, and "max" is the default value instead of a possible value
- --no-source -> --no-source-preview
Reviewed By: mbouaziz
Differential Revision: D5526651
fbshipit-source-id: 8383f37
Summary: That was too noisy. Propagate `--quiet` to the Python reporting hook so as to still emit bugs.txt and so on.
Reviewed By: martinoluca
Differential Revision: D5501106
fbshipit-source-id: 63b6451
Summary:
This allows the user to specify a different command to build the current version of the project vs to build the previous version of the project. Here's an example:
```
infer diff --gen-previous-build-command-script "echo clang -c hello.c" ... -- clang -c hello2.c
```
By default the two build commands are the same. If the script is to be used for both the current and the previous versions, then it's on the user to run it once first, eg:
```
infer diff --gen-previous-build-command-script "./myscript.sh previous" ... -- $(./myscript.sh current)
```
Reviewed By: martinoluca
Differential Revision: D5500989
fbshipit-source-id: 7374b44
Summary:
Do not use the deprecated (and slower) `#infer` flavor. Instead, `infer-run`
runs capture with the `#infer-capture-all` flavor, followed by merging targets,
followed by the analysis.
Move the call to `MergeCapture` around to make this change easier.
Reviewed By: mbouaziz
Differential Revision: D5547199
fbshipit-source-id: 53c9996
Summary:
Cosmetic changes to the output of `make clean` and `make test-replace`.
Run the inferTraceBugs tests from tests/build_systems/ like other such e2e
tests, so that they can run in parallel with other tests instead of
sequentially at the end.
Reviewed By: dulmarod
Differential Revision: D5526599
fbshipit-source-id: 57231bd
Summary:
This was an oversight. The prologue has to be run before capture and analysis
(see eg Infer.run). This sets up a bunch of things that are useful for the
diff analysis as well.
Reviewed By: jeremydubreil
Differential Revision: D5499405
fbshipit-source-id: 8f339cf
Summary: The `--failures-allowed` was doing for the Clang frontend what `--keep-doing` was doing for the backend. This revision merges the two options to simplify the Infer CLI and our tests.
Reviewed By: jvillard
Differential Revision: D5474347
fbshipit-source-id: 09bcea4
Summary: Using a dedicated abstract domain, like Quandary does, is more suitable for taint analysis.
Reviewed By: sblackshear
Differential Revision: D5473794
fbshipit-source-id: c917417
Summary:
First steps towards implementing diff analysis functionalities inside infer
itself. What works: run infer, checkout parent, re-run infer, checkout top
revision, compute the reportdiff (but no final surfacing on the console). Lots
of TODO still, inlined in the code.
Reviewed By: jberdine
Differential Revision: D5364226
fbshipit-source-id: 5b7f9a5
Summary:
Fixes#683
Disclaimer: I don't know what XML namespaces/namespace prefixes are, but this seems to do the trick.
Reviewed By: mbouaziz
Differential Revision: D5381480
fbshipit-source-id: 3da16e7
Summary: So that it get rebuilt. Test is clang_compilation_db_relpath
Reviewed By: mbouaziz
Differential Revision: D5364561
fbshipit-source-id: 8cae984
Summary: It was passing the argument multiple times rather than once with all the accepted values
Reviewed By: jvillard
Differential Revision: D5338509
fbshipit-source-id: 22b86a5
Summary:
Once the fixed/preexisting/introduced sets have been computed, they endure
further filtering which may decide that more of them are equal. These bugs just
get dropped on the floor. Put these into preexisting as well instead, at least
in the case of the "skip_duplicated_types_on_filenames" filter.
Reviewed By: martinoluca
Differential Revision: D5274248
fbshipit-source-id: 99b3f3d
Summary:
:
What is relevant for the Buck integration is not the list of bugs that we find in a single target, which is essentially identical to testing `infer -- javac ...`, but to make sure that we still find the issues that are involving several Buck targets, and later other things like the caching mechanism.
This should also make the tests faster.
Reviewed By: jberdine, jvillard
Differential Revision: D5250205
fbshipit-source-id: 7f66b68
Summary: This change introduces the a new argument that lets you restrict the results of a differential report to only certain files.
Reviewed By: mbouaziz
Differential Revision: D5236626
fbshipit-source-id: 52711e9
Summary:
This messes up with the Buck cache: if infer recaptures a file with only trivial changes that shouldn't affect the capture Buck will still believe it has to reanalyze everything that depends on that file if there's non-deterministic data in infer's output.
Re-use the `--buck` flag used by the Java Buck integration for mostly the same purposes. Add a few special cases for the flavours integration (eg: keep capture data).
Change perf stats registration to take `Config.buck_cache_mode` into account instead of relying on each call site to handle that peculiarity correctly. Also, there's no need to create the perf stats directories before calling the registration function since it will do that too.
Reviewed By: jeremydubreil
Differential Revision: D5192311
fbshipit-source-id: 334ea6e
Summary: This also allows us to better test that the new commands will keep working.
Reviewed By: jeremydubreil
Differential Revision: D5172891
fbshipit-source-id: 169bd6f
Summary: This fixes a couple of false positives as objects of BufferedReader don't need to be closed if the wrapped reader resource gets closed correctly.
Reviewed By: sblackshear
Differential Revision: D5106596
fbshipit-source-id: 725fb80
Summary:
Introduce `infer-<command>` for each command, except for internal commands
(only `infer-clang` for now) which are not exported. Install these executables
(which are just symlinks to `infer`) on `make install`. The main executable
looks at the name it was invoked with to figure out if it should behave as a
particular command.
Get rid of `InferClang`, `InferAnalyze`, and `InferPrint`. As a bonus, we now
only need to build one executable: `infer`, which should be a few seconds
faster (less link time).
`InferAnalyze` is now `infer-analyze` and `InferPrint` is `infer-print`. To run
`InferClang`, use a symlink named `clang`, `clang++`, etc. to `infer`. There
are such symlinks available in "infer/lib/wrappers/" already.
I also noticed that the scripts in xcodebuild_wrappers/ don't seem useful
anymore, so use wrappers/ instead, as for `make`.
Reviewed By: mbouaziz
Differential Revision: D5036495
fbshipit-source-id: 4a90030
Summary:
Don't store redundant information in C++ template Type.Name.t.
New signature:
```
| CppClass (qual_name, template_args)
```
For example, for `std::shared_ptr<int>`, will look like this:
```
| CppClass (["std", "shared_ptr"], Template [int])
```
While it used to be:
```
| CppClass (["std", "shared_ptr<int>"], Template (["std", "shared_ptr"], [int]))
```
Reviewed By: jberdine, mbouaziz
Differential Revision: D4834512
fbshipit-source-id: cb1c570
Summary:
Title.
The way types are printed is completely valid, but little weird for some C++ programmers:
`int const` - same as `const int`
`int * const` - pointer is `const`, value under it is not
`int const *` - pointer is not `const`, but the value is
`int const * const` - both pointer and value are const
Reviewed By: jberdine
Differential Revision: D4962180
fbshipit-source-id: dcb02e3
Summary: Sometimes reports need traces to be fully understood, but sometimes reporting where the exception takes place can save time to developers.
Reviewed By: jvillard
Differential Revision: D4914037
fbshipit-source-id: 039ab63
Summary:
As an interprocedural checker, SIOF should not run unless explicitly required.
Make it a new type of analyzer like other similar checkers.
Reviewed By: mbouaziz
Differential Revision: D4937820
fbshipit-source-id: a9e2d38
Summary:
Try to read .inferconfig in the current directory, then in .., then in ../..,
etc. This can be overriden with the `INFERCONFIG` environment variable.
This removes the need for two-phase parsing, so clean up that code too.
Paths in .inferconfig are interpreted relative to where .inferconfig is located.
This does not apply to other path-sensitive things like regexpes... this is not
a show stopper because regexpes can account for the fact that infer may be
called from different project roots.
Make sure we fail when .inferconfig exists but cannot be read.
Reviewed By: jberdine
Differential Revision: D4843142
fbshipit-source-id: 340a63f
Summary:
Adds a new type and branching for a missing path of execution.
closes#575
Reviewed By: jvillard
Differential Revision: D4738681
fbshipit-source-id: f72344c
Summary:
Add support for Makefiles to the copyright linter. Makefiles are a bit
different than shell because they should start with the copyright notice
straight away (whereas shell starts with the #! stuff).
Reviewed By: mbouaziz
Differential Revision: D4786620
fbshipit-source-id: 504dc23
Summary:
It can be useful when debugging infer or the Makefiles themselves to see what
`make` is doing. Instead of editing Makefiles to remove `@` now you can `make
VERBOSE=1`.
This is just `git ls-files | grep -e Makefile -e '.*\.make' | xargs sed -e 's/^\t@/\t$(QUIET)/' -i`, and adding the definition of `QUIET` to Makefile.config.
Reviewed By: jeremydubreil
Differential Revision: D4779115
fbshipit-source-id: e6e4642
Summary:
Most of our tests work by comparing the output of some command to a baseline
expected output. It's often needed to update that baseline.
Previously, that was crudely done by attempting to move every foo.exp.test file
to foo.exp. This does not work terribly well, in particular because
foo.exp.test might be stale.
Instead, add a `replace` target to every test that knows how to update the
baseline. This allows custom behaviours too, eg in the differential tests.
Most of the tests include base.make or differential.make, so add a replace target
there. A few tests are completely custom, add a replace target to them too.
Reviewed By: jeremydubreil
Differential Revision: D4754279
fbshipit-source-id: ec34273
Summary:
All tests were redirecting `stderr` into duplicates.txt which made it much harder to see other error messages in stderr (such as uncaught exceptions).
To mitigate it, write duplicates to separate file and don't redirect `stderr` to another file.
Reviewed By: jvillard
Differential Revision: D4728938
fbshipit-source-id: 8ad2fc8
Summary:
Two issues in the previous code:
1. We'd just tack on `#compilation-database` so if there already are `#flavors`
in a Buck target then we get a malformed `#flavors#compilation-database`
instead of `#flavors,compilation-database`. There's already code to deal
with that for other flavors (`#infer-capture-all`), so extend and reuse that.
2. The code didn't work if there are spaces in target names (sigh). Harden the
code a bit so that it works. Unfortunately Buck doesn't escape spaces at all
in its `buck targets --show-output` output, so the parsing still relies on
there being no spaces in flavors to work correctly. Sample output:
```
$ buck targets --show-full-output //clang_compilation_database:Hel\ lo#compilation-database
Not using buckd because watchman isn't installed.
[+] PROCESSING BUCK FILES...0.1s [100%] 🐳 New buck daemon
//clang_compilation_database:Hel lo#compilation-database /home/jul/infer/infer/tests/build_systems/codetoanalyze/buck-out/gen/clang_compilation_database/__Hel lo#compilation-database.json
```
Also, some code in codetoanalyze/clang-compilation-database/ didn't compile, so
fix that.
Reviewed By: dulmarod
Differential Revision: D4714338
fbshipit-source-id: b8ae324
Summary:
This makes sure that one can run `./build-infer.sh` then `make`. Otherwise it's
not always clear what one should do to recompile infer, eg when `make` will
work and when `./build-infer.sh` should be used instead, in particular when the
user doesn't have opam configured for her terminal.
Reviewed By: jberdine
Differential Revision: D4698159
fbshipit-source-id: 5df8059
Summary:
We were including hex of empty string if mangled name was not empty (so for all C++ functions).
Instead, include hex of a source file only if it's not empty
Reviewed By: mbouaziz
Differential Revision: D4705388
fbshipit-source-id: 55b6587
Summary:
Procnames files are now reversed qualifier lists with `#` as separator (instead of `::` which needs to be escaped in bash).
Because of the mechanism that is used to obtain qualifiers, it also affects naming for ObjC classes.
Examples:
```
std::unique_ptr<int>::get -> get#unique_ptr<int>#std#__MANGLED,...__ // C++ method
folly::split -> split#folly#__MANGLED,..._ // function within namespace
NSNumber numberWithBool: -> numberWithBool:#NSNumber#class // ObjC method
```
Reviewed By: jvillard
Differential Revision: D4689701
fbshipit-source-id: c3acfc6
Summary:
There is no point in attaching plugin to `clang -E` calls since they don't produce any AST.
Same applies to `-M`, `-MM`, etc. (but not `-MD` nor `-MMD`).
Reviewed By: jvillard
Differential Revision: D4681618
fbshipit-source-id: 7a76add
Summary:
When parsing .inferconfig and the env var, allow all modes of infer. This
allows people to provide default values for options in .inferconfig. This
requires subcommands' options to be all distinct, but that's already the case.
Reviewed By: jberdine
Differential Revision: D4674672
fbshipit-source-id: 992b454
Summary:
Given two analysis results, it's now possible to compare them with the following command:
infer --diff --report-current reportA.json --report-previous reportB.json --file-renamings file_renamings.json
this command will then generate 3 files in `infer-out/differential/{introduced, fixed, preexisting}.json`, whose meaning is the following:
- `introduced.json` has all issues in `current` that are not in `previous`
- `fixed.json` has all issues in `previous` that are not in `current`
- `preexisting.json` has all issues that are in both `current` and `previous`
The json files generated can then be used to categorise results coming from incremental analyses of a codebase.
Reviewed By: jvillard
Differential Revision: D4482517
fbshipit-source-id: 1f7df3e
Summary:
Make sure `inferTraceBugs` works with non-ascii characters. Harden the code a
bit more on the way.
Fixes#592
Reviewed By: mbouaziz
Differential Revision: D4659016
fbshipit-source-id: 79f7a80
Summary:
- The package declaration was wrong
- There was a leftover copy-pasted resource leak test from `CursorLeak.java`.
Reviewed By: sblackshear
Differential Revision: D4612687
fbshipit-source-id: 42c1a35
Summary:
Running Buck can be very expensive depending on your installation of Buck (eg,
no watchman). Hardcoded paths seem good enough for now as `make test` will
catch if they go out of date.
Reviewed By: jeremydubreil
Differential Revision: D4597629
fbshipit-source-id: da9b704
Summary: Shorter is better. `--compilation-database` was taken, renaming it to `--buck-compilation-database`.
Reviewed By: dulmarod
Differential Revision: D4567028
fbshipit-source-id: 011cd6f
Summary:
Sevel auxiliary files made it to the output directory of the analysis of individual targets when analyzing Java projects build with Buck. However, these files are then taken into account= to compute the target rule key and then to decide whether to analyze the dependent targets. Since these auxiliary files were containing time sentive information, every cach miss on a given target would then invalitate the cache entries for all the dependent targets.
This diff cleans up the output directory to only keep the specs files, the `global.tenv` and the `report.json` files which are the only artifacts needed to analyze the dependent targets
This diff makes a minimal number of changes to see how it behaves in prod, but I intend to refoctor this more when continuing to add support for running Infer with genrules
Reviewed By: sblackshear
Differential Revision: D4562615
fbshipit-source-id: 4628420
Summary:
Xcode's compilation databases follows a different convention than cmake's and
escape the `"file"` and `"dir"` fields of each unit to make them shell-ready.
We need to treat them differently when reading them.
This adds a new `--clang-compilation-db-files-escaped` option and makes the
code related to reading compilation databases deal correctly with both
conventions.
Reviewed By: akotulski
Differential Revision: D4559239
fbshipit-source-id: 51120ae
Summary: Some compilation databases give relatives paths for the `"file"` field. This is not ambiguous as there is also a `"dir"` field, so use that to make the path absolute when needed.
Reviewed By: dulmarod
Differential Revision: D4559145
fbshipit-source-id: be36a16
Summary: This annotation can then be used to suppress the warnings on non-android Java projects.
Reviewed By: sblackshear
Differential Revision: D4544858
fbshipit-source-id: 8a0b8fa
Summary: This case was already working but there was no tests for it
Reviewed By: sblackshear
Differential Revision: D4529473
fbshipit-source-id: ca3ff02
Summary: This fixes a wrong level of indirection when performing the type substitution.
Reviewed By: sblackshear
Differential Revision: D4521008
fbshipit-source-id: 7324ea6
Summary: This should fix the issue with broken invariants when the method specialization on pointer ends up doing a substitution on non pointer types
Reviewed By: sblackshear
Differential Revision: D4487232
fbshipit-source-id: f3fce84
Summary: Just adding some more test cases on how Infer handles dynamic dispatch.
Reviewed By: jberdine
Differential Revision: D4486529
fbshipit-source-id: d90ef42
Summary:
This replaces the previous integration written in Python, which consisted in 1)
run the mvn command and parse its output to locate "directories containing
source files", 2) run on files named "*.java" in these directories. This meant
we had to run javac twice on each source file, and more importantly this
mechanism of finding source files was very fragile. In fact, I could not make
it work on several mvn projects I tried.
The new integration is based on parsing "pom.xml" to add an "infer-capture"
profile which instructs mvn to run `/path/to/infer` instead of `javac`. We also
add this profile to each maven submodule.
Users can specify an "infer-capture" profile themselves if the default one
doesn't work; in that case we don't inject our own "infer-capture" profile.
Reviewed By: jeremydubreil
Differential Revision: D4409613
fbshipit-source-id: d664274
Summary:
Also make sure we don't introduce deprecated options in our repo, eg when
calling infer from infer.
Reviewed By: jeremydubreil
Differential Revision: D4430379
fbshipit-source-id: 77ea7fd
Summary: This allows to modify the structure of the buck project under test with less risk of breaking the tests
Reviewed By: sblackshear
Differential Revision: D4411721
fbshipit-source-id: 6ee2cc5
Summary:
This makes it more obvious why infer would force a path to be absolute since we
base that decision on the resolved path. For instance:
```
$ mkdir foo
$ cd foo
$ ln -s ../examples goo
$ infer -- clang -c goo/hello.c
[...]
/home/jul/infer/examples/hello.c:14: error: NULL_DEREFERENCE
```
We see that the path is outside of the current directory clearly, whereas
before infer would report on "goo/hello.c".
Reviewed By: akotulski
Differential Revision: D4409579
fbshipit-source-id: 7172005
Summary:
- Only generate one extra genrule for running infer. Remove all other java library rules currently being generated
- Generate infer genrule only if the `java_library` has `srcs`, otherwise there is nothing to analyze
- Use `SRCDIR` to avoid making a copy of the target sources as buck will just symlink them instead
- Added support for `android_library` rules as well
- Added support to generate both `infer` and `eradicate` genrules
Closes https://github.com/facebook/infer/pull/558
Reviewed By: sblackshear
Differential Revision: D4400365
Pulled By: jeremydubreil
fbshipit-source-id: 24750e2
Summary:
If we don't delete infer-out then it gets polluted with files from previous
versions of infer resulting in segfaults during `make test`.
Reviewed By: cristianoc
Differential Revision: D4397723
fbshipit-source-id: 1211d40
Summary:
The cmake test removes the _build dirs, and the utf8_in_pwd test
rsyncs them.
Reviewed By: akotulski
Differential Revision: D4375554
fbshipit-source-id: 3fa088c
Summary: Need to upgrade in order to specify some taint properties on a more recent `WebView` API.
Reviewed By: cristianoc
Differential Revision: D4382590
fbshipit-source-id: 0925742
Summary: Use the lazy dynamic dispatch by default in prod for the Java analysis
Reviewed By: sblackshear
Differential Revision: D4356872
fbshipit-source-id: 491e92e
Summary:
Without this it's not always obvious which test fails. It also makes it easier
to mass-patch test failures from the CI jobs to replace expected outputs with
actual outputs (eg, when debugging osx frontend tests from linux).
Reviewed By: jberdine
Differential Revision: D4352205
fbshipit-source-id: 8887d7b
Summary:
Seems like we cannot run 2 instances of Buck in parallel even when one uses
buck-out/ and the other buck-out/foo/.
Reviewed By: sblackshear
Differential Revision: D4347090
fbshipit-source-id: 7e65d2f
Summary:
This will simplify the InferPrint logic of checking what should/should-not be reported.
I will remove the issue names in Localise in a next diff.
Reviewed By: ddino
Differential Revision: D4334327
fbshipit-source-id: ebcfd6c
Summary:
SuppressWarnings annotations are hardly used and add considerable
complexity due to requiring recompilation with an annotation processor.
Reviewed By: jvillard
Differential Revision: D4312193
fbshipit-source-id: c4fc07e
Summary:
Most of the diff adds a way to run an existing test with different infer
options.
Also, do not run the Python script when capturing "analyze".
fixes https://github.com/facebook/infer/issues/518
Reviewed By: jberdine
Differential Revision: D4333762
fbshipit-source-id: 642acff
Jia Chen
Jules Villard
Daiva Naudziuniene
Jeremy Dubreil
Mehdi Bouaziz
azhdar
Martino Luca
Sam Blackshear
Andrzej Kotulski
Paco Estevez Garcia
Juergen Hoetzel
Dulma Churchill
Gautam Korlam
Josh Berdine