Summary:
This also prints the CFGs *after* pre-analysis for individual procedures
in infer-out/captured/<filename>/<proc>.dot. One can also look up the
CFGs before pre-analysis in infer-out/captured/proc_cfgs_frontend.dot.
Context: I want to add a pre-analysis that needs to look at proc
attributes inter-procedurally. For this to make sense it has to happen
*after* all of capture, and before analysis.
Thus, this diff brings back the lazy running of the pre-analysis like in
D15803492, except that we still make sure to run the pre-analyses
systematically regardless of the checkers being run by running the
pre-analysis from ondemand.ml. Also we don't need to re-introduce the
"did_preanalysis" proc attribute for the same reason that the
pre-analysis is now run once and for all by ondemand.ml (instead of each
individual checker back in the days).
This has the benefit of running the pre-analysis only when needed, and
the drawback that several concurrent processes analysing the same proc
descs will duplicate work. Since pre-analyses are supposed to be very
fast I assume that neither is a big deal. If they become more expensive
then the benefit gets bigger and the drawback is just the same as with
regular analyses.
Reviewed By: skcho
Differential Revision: D18573920
fbshipit-source-id: de350eaef
Summary:
The previous code would call the destructor for the C++ temporary
*before* the prune nodes, which then try to dereference it. Wrong.
Quick fix: don't destroy temporaries in conditionals.
Reviewed By: mbouaziz
Differential Revision: D16030735
fbshipit-source-id: e11abad58
Summary: Inject destructor calls to destroy a temporary when its lifetime ends.
Reviewed By: mbouaziz
Differential Revision: D15674209
fbshipit-source-id: 0f783a906
Summary:
This started as an attempt to understand how to modify the frontend to
inject destructors for C++ temporaries (see next diffs).
This diff rewrites the existing logic for computing the list of
variables that should be destroyed at the end of each statement, either
because it's the end of their syntactic scope or because control flow
branches outside of their syntactic scope.
The frontend translates a function from the last instructions to the
first, but scope computation needs to be done in the other direction, so
it's done in a separate pass *before* the main translation happens. That
first pass creates a map from statements in the AST to the list of
variables that should be destroyed at the end of these statements. This
is still the case now.
Before, that map would be computed in a bit of a weird way: scopes are
naturally a stack but instead of that the structure maintained was a
flat list + a counter to know where the current scope ended in that
list.
In this diff, redo the computation maintaining a stack of scopes
instead, which is a bit cleaner. Also treat more instructions as
introducing a new scope, eg if, for, ...
Reviewed By: mbouaziz
Differential Revision: D15674208
fbshipit-source-id: c92429e82
Summary:
Somewhat trivial: add a string to "Destruction" nodes to indicate why
they were created. Rename the main `instruction_aux` function into
`instruction_translate` (see next diff for why).
Reviewed By: mbouaziz
Differential Revision: D15674211
fbshipit-source-id: 8a7eda72c
Summary:
Instead of emitting an ad-hoc builtin on variable declaration emit a new
metadata instruction. This allows us to remove the code matching on that
ad-hoc builtin that had to be inserted in several checkers.
Inferbo & pulse used that information meaningfully and had to undergo
some minor changes to cope with the new metada instruction.
Reviewed By: ezgicicek
Differential Revision: D14833100
fbshipit-source-id: 9b3009d22
Summary:
This will be used in the future to determine what to do with destructors
in pulse.
Reviewed By: mbouaziz
Differential Revision: D14324759
fbshipit-source-id: bc3c34471
Summary:
Before, the liveness pre-analysis would place extra instructions in the
CFG for either:
1. marking an `Ident.t` as dead, or
2. marking a `Pvar.t` as `= 0`
But we have no way of marking pvars dead without setting them to 0. This
is bad because setting pvars to 0 is not possible everywhere they are
dead. Indeed, we only do it when we haven't seen their address being
taken anyway. This prevents the following situation, recorded in our tests:
```
int address_taken() {
int** x;
int* y;
int i = 7;
y = &i;
x = &y;
// if we don't reason about taken addresses while adding nullify instructions,
// we'll add
// `nullify(y)` here and report a false NPE on the next line
return **x;
}
```
So we want to mark pvars as dead without nullifying them. This diff
extends the `Remove_temps` SIL instruction to accept pvars as well, and
so renames it to `ExitScope`.
Reviewed By: da319
Differential Revision: D13102953
fbshipit-source-id: aa7f03a52
Summary:
Useful to understand the changes in the pre-analysis, or to inspect the
CFG that checkers actually get.
This means that the pre-analysis always runs when we output the dotty,
but I don't really see a reason why not. In fact, we could probably
*always* store the CFGs as pre-analysed.
Reviewed By: mbouaziz
Differential Revision: D13102952
fbshipit-source-id: 89f3102ec
Summary:
When initialising a variable via semi-exotic means, the frontend loses
the information that the variable was initialised. For instance, it
translates:
```
struct Foo { int i; };
...
Foo s = {42};
```
as:
```
s.i := 42
```
This can be confusing for backends that need to know that `s` actually
got initialised, eg pulse.
The solution implemented here is to insert of dummy call to
`__variable_initiazition`:
```
__variable_initialization(&s);
s.i := 42;
```
Then checkers can recognise that this builtin function does what its
name says.
Reviewed By: mbouaziz
Differential Revision: D12887122
fbshipit-source-id: 6e7214438
Summary:
New clang in the plugin \o/
Changes that were needed:
- (minor) Some extra AST nodes
- defining a lambda and calling it in the same line (`[&x]() { x = 1; }()`) used to get translated as a call of the literal but now an intermediate variable gets created, which confuses uninit in one test. I added another test to showcase the limitation this is hitting: storing the lambda in a variable then calling it will not get caught by the checker.
The controller you requested could not be found.: facebook-clang-plugins
Reviewed By: jeremydubreil
Differential Revision: D10128626
fbshipit-source-id: 8ffd19f3c
Summary:
Change the license of the source code from BSD + PATENTS to MIT.
Change `checkCopyright` to reflect the new license and learn some new file
types.
Generated with:
```
git grep BSD | xargs -n 1 ./scripts/checkCopyright -i
```
Reviewed By: jeremydubreil, mbouaziz, jberdine
Differential Revision: D8071249
fbshipit-source-id: 97ca23a
Summary:
Labels inside switch statements were causing havoc (see test), and the translation of switch statements in general could be improved to handle more cases.
It turns out that `case` (and `default`) statements are more or less fancy labels into the code. In other words, if you erase all the `case XXX:` and `default:` strings in the `switch` statement you get the real structure of the program, and `switch` just jumps straight to the first `case` directives (and to the second if the first one is not satisfied, etc. until all `case`/`default` have been considered).
This suggests an alternative implementation: translate the body of the `switch` and simply record the list of switch cases inside that body, along with where they point to. Then post-process this list to construct the control flow of the `switch`, which points into the control-flow of the `body`. In order not to modify every function in `CTrans` to propagate the current list of cases, I created an ugly `ref` inside `SwitchCase` instead (but it cannot be directly accessed and it's guaranteed to be well-parenthesised wrt nested switches by the `SwitchCase` API so it's not too bad).
[unrelated] Also make translation failures output more information about what exactly in the source code is causing the crash, and the ancestors in the AST that lead to the crash site.
Reviewed By: martinoluca
Differential Revision: D8011046
fbshipit-source-id: 8455090
Summary:
Previously, the type of `trans_result` contained a list of SIL expressions.
However, most of the time we expect to get exactly one, and getting a different
number is a soft(!) error, usually returning `-1`.
This splits `trans_result` into `control`, which contains the information
needed for temporary computation (hence when we don't necessarily know the
return value yet), and a new version of `trans_result` that includes `control`,
the previous `exps` list but replaced by a single `return` expression instead,
and a couple other values that made sense to move out of `control`. This allows
some flexibility in the frontend compared to enforcing exactly one return
expression always: if they are not known yet we stick to `control` instead (see
eg `compute_controls_to_parent`).
This creates more garbage temporary identifiers, however they do not show up in
the final cfg. Instead, we see that temporary IDs are now often not
consecutive...
The most painful complication is in the treatment of `DeclRefExpr`, which was
actually returning *two* expressions: the method name and the `this` object.
Now the method name is a separate (optional) field in `trans_result`.
Reviewed By: mbouaziz
Differential Revision: D7881088
fbshipit-source-id: 41ad3b5
Summary:
This simplifies the frontends and backends in most cases. Before this diff,
returning `void` could be modelled either with a `None` return, or a dummy
return variable with type `Tvoid`. Now it's always the latter.
Reviewed By: sblackshear, dulmarod
Differential Revision: D7832938
fbshipit-source-id: 0a403d1
Summary:
When looking at large CFGs, at least in `xdot`, it's often difficult to find
the procedure you're looking for. Sorting the proc names puts them in
alphabetical order, which makes searching one procedure easier.
Reviewed By: mbouaziz
Differential Revision: D7758521
fbshipit-source-id: 8e9997f
Summary: We do not inject a destructor call if the destructor declaration does not contain a body in AST. We miss all the cases where the destructor is declared in `.h` file and defined in `.cpp` file as other files include `.h` file and do not contain the body of the destructor when destructor calls are being injected based on AST information. After this diff we inject destructor calls even if we do not have body for the destructor in AST.
Reviewed By: sblackshear
Differential Revision: D6796567
fbshipit-source-id: 1c187ec
Summary:
Not sure what an "iCFG" is but the dotty is only about CFGs anyway.
Diff obtained by mass-`sed`.
Reviewed By: sblackshear
Differential Revision: D6324280
fbshipit-source-id: b7603bb
Summary:
The previous domain for SIOF was duplicating some work with the generic Trace
domain, and basically was a bit confused and confusing. A sink was a set of
global accesses, and a state contains a set of sinks. Then the checker has to
needlessly jump through hoops to normalize this set of sets of accesses into a
set of accesses.
The new domain has one sink = one access, as suggested by sblackshear. This simplifies
a few things, and makes the dedup logic much easier: just grab the first report
of the list of reports for a function.
We only report on the fake procedures generated to initialise a global, and the
filtering means that we keep only one report per global.
Reviewed By: sblackshear
Differential Revision: D5932138
fbshipit-source-id: acb7285
Summary:
With this change and the previous facebook-clang-plugins change, infer no
longer exhausts the biniou buffer when reading the serialized C++ AST.
update-submodule: facebook-clang-plugins
Reviewed By: mbouaziz
Differential Revision: D5891081
fbshipit-source-id: cf48eac
Summary: The prune nodes where translated as `prune (expr = false)` and `prune ( expr != false)`. This case is a bit tricky to deconstruct in HIL. This diff translates the prune instructions as just `prune !expr` for the true branch and `prune expr` for the false branch.
Reviewed By: dulmarod
Differential Revision: D5832147
fbshipit-source-id: 2c3502d
Summary:
We need to make sure that destructors of virtual base classes are called only once. Similarly to what clang does, we have two destructors for a class: a destructor wrapper and an inner destructor.
Destructor wrapper is called from outside, i.e., when variables go out of scope or when destructors of fields are being called.
Destructor wrappers have calls to inner destructors of all virtual base classes in the inheritance as their bodies.
Inner destructors have destructor bodies and calls to destructor wrappers of fields and inner destructors of non-virtual base classes.
Reviewed By: dulmarod
Differential Revision: D5834555
fbshipit-source-id: 51db238
Summary: Destroying local variables that are out of scope after `continue`.
Reviewed By: jberdine
Differential Revision: D5804120
fbshipit-source-id: 638cff5
Summary: Destroying local variables that are out of scope after `break`.
Reviewed By: jberdine
Differential Revision: D5764647
fbshipit-source-id: a7e06ae
Summary: We inject destructor calls of base classes inside destructor bodies after the destructor calls of fields.
Reviewed By: dulmarod
Differential Revision: D5745499
fbshipit-source-id: 90745ec
Summary:
We were including hex of empty string if mangled name was not empty (so for all C++ functions).
Instead, include hex of a source file only if it's not empty
Reviewed By: mbouaziz
Differential Revision: D4705388
fbshipit-source-id: 55b6587
Summary:
Procnames files are now reversed qualifier lists with `#` as separator (instead of `::` which needs to be escaped in bash).
Because of the mechanism that is used to obtain qualifiers, it also affects naming for ObjC classes.
Examples:
```
std::unique_ptr<int>::get -> get#unique_ptr<int>#std#__MANGLED,...__ // C++ method
folly::split -> split#folly#__MANGLED,..._ // function within namespace
NSNumber numberWithBool: -> numberWithBool:#NSNumber#class // ObjC method
```
Reviewed By: jvillard
Differential Revision: D4689701
fbshipit-source-id: c3acfc6
Summary:
Currently cfg nodes are written into dot files in whatever order they
appear in a hash table. This seems unnecessarily sensitive, so this
diff sorts the nodes.
Reviewed By: dulmarod
Differential Revision: D4232377
fbshipit-source-id: a907cc6
Summary: These are dangerous if you are trying to compare a type to a string, and they're also unsightly.
Reviewed By: jvillard
Differential Revision: D4189956
fbshipit-source-id: 14ce127
Summary:
This call was producing confusing false positives when deleted object was possible to be null.
Changing frontend to add that check is not trivial so I turned it off for now (we don't handle
destructors in other cases anyway)
Reviewed By: dulmarod
Differential Revision: D3509354
fbshipit-source-id: c23dc81
Jules Villard
Josh Berdine
David Lively
Mehdi Bouaziz
Dulma Churchill
Ezgi Çiçek
Daiva Naudziuniene
Jeremy Dubreil
Andrzej Kotulski
Sam Blackshear
Cristiano Calcagno