Summary:
ClangWrapper.ml was skipping clang commands that didn't capture
by default. It was using the 'skip_analysis_in_path_skips_compilation'
flag to NOT skip commands. This is a confusing use of that flag.
Default should be to run clang (in case it does something useful),
and a new flag to disable this.
Reviewed By: ngorogiannis
Differential Revision: D26459100
fbshipit-source-id: 7f2e9a269
Summary:
Now that the buck java flavour is fully deployed, the genrule-based integrations for java can be removed. We also remove the combined (clang+java) integration as this will be reimplemented using flavours in the future.
Also, remove a bunch of deprecated arguments linked to these integrations.
Reviewed By: jvillard
Differential Revision: D26104384
fbshipit-source-id: 6b0059407
Summary: This is needed to address GC stalls due to a too small heap.
Reviewed By: jvillard
Differential Revision: D26045530
fbshipit-source-id: 590d1e72c
Summary:
:
New flag (equivalent to --clang-biniou-file) to pass in AST to
frontend.
Passing in json files has the big advantage of emitting line numbers
on frontend AST errors.
Reviewed By: jvillard
Differential Revision: D23814358
fbshipit-source-id: 0ad0452ff
Summary:
Sometimes you need several project roots (eww), this makes paths make
sense even in that case.
Reviewed By: martintrojer
Differential Revision: D24336244
fbshipit-source-id: f087d533a
Summary: New, experimental for now, integration with buck on Java using the `#infer-java-capture` flavor.
Reviewed By: artempyanykh
Differential Revision: D22187748
fbshipit-source-id: 62cdafe6b
Summary: This linters were not used much anymore, so we can delete them.
Reviewed By: ngorogiannis
Differential Revision: D22233895
fbshipit-source-id: f31180a05
Summary: There is now a compilation check for UNAVAILABLE_API_IN_SUPPORTED_IOS_SDK so this check is less useful. Also the check REGISTERED_OBSERVER_BEING_DEALLOCATED is useful only in an old version of iOS.
Reviewed By: ngorogiannis
Differential Revision: D22231851
fbshipit-source-id: 72151fef5
Summary:
A buck integration for capturing simultaneously clang and java targets.
Just like the java-specific `JavaGenruleCapture` integration, it relies on
dummy targets that depend on the flavoured clang versions.
For example, a `cxx_library` target named `//clang:hello` will have an associated target
called `//clang:hello_infer` that depends on `//clang:hello#infer-capture-all`,
and whose output is a text file containing the output path of the dependency.
Reviewed By: jvillard
Differential Revision: D21620458
fbshipit-source-id: 23919387b
Summary:
It's easy to create large arrays in code, eg `int x[1UL << 16];`, but
these can generate huge nodes in SIL because zero-initialization is
translated by zero-ing structures element by element. Introduce a
builtin to use instead. Keep the naive method for small structures (with
a configurable limit on "small").
Reviewed By: dulmarod
Differential Revision: D20836836
fbshipit-source-id: 6bf5410f8
Summary:
Warning: This might be a bit brutal.
PerfStats and EventLogger are pretty much subsumed by `ScubaLogging`.
It seems no one has been looking at the data they generate recently.
Let's delete them! If we need to re-implement some parts later on, let's
do that using `ScubaLogging`, which is better (eg, still produces data
when infer crashes).
Things we lose:
- errors in the clang frontend due to missing decl translation, etc.
- errors in biabduction due to timeouts, functions not found, etc.
We could also re-implement these using BackendStats and ScubaLogging
instead of brutally deleting everything.
Reviewed By: ngorogiannis
Differential Revision: D20343087
fbshipit-source-id: 90a3121ca
Summary:
The `--continue-analysis` option enables continuing analysis after more targets are captured by
`--continue`. For example,
```
$ infer capture -- buck build tgt1
$ infer analyze --merge
$ infer capture --continue -- bucck build tgt2
$ infer analyze --merge --continue-analyze
```
In the last analysis, it reuses the analysis results of `tgt1` from the previous analysis. If
`tgt1` and `tgt2` have a same dependency to a library, the analysis results of the library is also
reused.
Reviewed By: dulmarod
Differential Revision: D19996598
fbshipit-source-id: bb6874a6f
Summary:
You should use `--buck-java` instead, which uses the new "genrule
master" integration.
This diff makes it impossible to select the previous integration.
Upcoming diffs will clean up the resulting dead code.
This also make infer fail hard when no buck mode is specified in a buck
capture command, eg `infer -- buck build //foo:foo`. The reason is that
we need to choose between 3 incompatible integrations and making any of
them the default will confuse at least one person in the future.
Reviewed By: ngorogiannis
Differential Revision: D19176391
fbshipit-source-id: 707d18b50
Summary:
This changes how we select amongst our (currently) 4 Buck integrations
for Java and clang, as well as how the user's choice is reflected by the
Config module.
The old command line interface is still supported but is now deprecated.
The changes in how to select each integration are:
- clang via "flavors", activated with `--flavors`, now with `--buck-clang`
- clang via "compilation DB", activated with `--buck-compilation-database`, unchanged
- Java via "genrule", activated with `--genrule-master-mode`, now with `--buck-java`
- Java "without genrules", used to be activated by *not specifying any other Buck mode*, unchanged
Instead of various `Config` flags corresponding to the previous CLI that
are allowed in any combination of `flavors`,
`buck_compilation_database`, `genrule_master_mode`, `Config` now exposes
a single `buck_mode` datatype. This allows, eg, `flavors` to override
`buck_compilation_database` if needed. It will also make it easier to
get rid of the old "Java without genrules" integration in a later diff
(see inline comments).
Reviewed By: ngorogiannis
Differential Revision: D19175686
fbshipit-source-id: 29b3831be
Summary:
Describe what the --report-*-* options actually do instead of their
outdated documentation from the time where this was
`--checkers-blacklist-regex`, `--infer-blacklist-regex` and the like.
Reviewed By: dulmarod, mityal
Differential Revision: D17906015
fbshipit-source-id: 204349e9e
Summary:
Sqlite versions set their own default page and cache size. Old versions use crazy-non-optimal settings.
Allow setting both from command line and set up reasonable defaults. See, e.g.,
https://wiki.mozilla.org/Performance/Avoid_SQLite_In_Your_Next_Firefox_Feature
for page size notes.
The defaults will cost a maximum of 64Mb in cache per Infer process. These improve merging times significantly.
Reviewed By: jvillard
Differential Revision: D17364643
fbshipit-source-id: b9abab10f
Summary:
I found it very confusing that running infer with --debug makes the
report to be different.
Intuitively, I expect (and I think majority of users would expect) that
`--debug` makes things more verbose (and potentially more slow / consuming
more memory and disk space), but does not change anything apart from it.
One pro of preserving existing behavior, pointed by jvillard:
- Suppose some check is experimental or disabled in the config. The
users expect the issue to be found, but it does not show up. They run
`infer --debug` to understand the behavior, and suddenly the issue shows
up.
I, hovewer, find this pro not important enough and potentially confusing
the users even more.
(If they want to investigate seriously, they can always use
--no-filtering, and there are a lot of cases when the issue does not
show up for others, much hard to undertand reasons, than the fact that
it is disabled).
Reviewed By: jvillard
Differential Revision: D17113750
fbshipit-source-id: 46cc93503
Summary:
These have proved to be too fragile to maintain as they would often break
compilation of user code. They have been off by default for more than a year
now (D7350715).
Removing the include models shows a more accurate picture of what infer results
look like in production. As such, lots of tests have changed, mostly
biabduction but also in inferbo. SIOF was using include-based models too but
now libc++ is better and iostreams are implemented in a way that SIOF
understands (instead of being magical creatures) so nothing changed there.
Reviewed By: skcho
Differential Revision: D16602171
fbshipit-source-id: ce38f045b
Summary:
- make most behaviours independent of the java version so that either works fine without user intervention
- modify regexp used to parse `javac` output to work for all versions
- no need to be sure we are in Java 11 to match java 11-only method name in quandary
- for the rest, provide a command-line flag to specify the java version manually in case it differs from the version that infer was built against
- this only affects the Maven integration for now
To do all that, also change the configure script to record the version of java instead of just a boolean for whether it's >= 10.
Reviewed By: ezgicicek
Differential Revision: D16493988
fbshipit-source-id: 622e91b25
Summary:
The default values of config options can sometimes depend on build-time
configuration values. This makes checking that the manuals "remain the same"
trickier as the manuals can be different depending on the platform. This
removes *all* default values from the checked-in manuals. We could be more
fine-grained and scrub only the values that are susceptible to change but for
now this is probably good enough.
This is done by implementing new options `--help-scrubbed` and
`--help-scrubbed-full` and using these in our tests instead of `--help` and
`--help-full` (which remain unaffected).
Also don't wrap the default values in `$(i,...)` anymore because the defaults
can trigger line breaks and then the man page is ill-formatted because that
format is stupid.
Reviewed By: mityal
Differential Revision: D16543779
fbshipit-source-id: bc929ff8c
Summary: This should stop the bleeding until we get a better solution like shared memory + single writer process.
Reviewed By: mbouaziz
Differential Revision: D10868360
fbshipit-source-id: a4d0b064e
Summary:
Sometimes the default timeout of 10s is not enough(!). Make it
configurable while we work on not hitting it anyway.
Reviewed By: da319
Differential Revision: D10083772
fbshipit-source-id: ab949039f
Summary:
This allows infer devs to see the effects their changes have on the infer manuals.
Check in the manuals for each subcommand + the output of `--help-full` to get a
complete picture. If this is too annoying we can also check in only
`--help-full`.
Reviewed By: mbouaziz
Differential Revision: D9916404
fbshipit-source-id: b981e2c33
Jules Villard
Martin Trojer
Nikos Gorogiannis
Dulma Churchill
Sungkeun Cho
Mitya Lyubarskiy
David Lively