Summary:
This previous FP does not occur anymore, make sure it doesn't regress.
https://github.com/facebook/infer/issues/49
Reviewed By: dulmarod
Differential Revision: D8442842
fbshipit-source-id: b3fde1ad1
Summary:
Litho uses an idiom as follows. `Component.Builder` has an abstract method `T getThis()` which is supposed to be implemented as `{return this;}`.
I believe the reason it's there is to have covariant return types in subclasses, though this doesn't really matter.
We don't do dynamic dispatch, so instead of summarising `getThis` as having a return ownership of `OwnedIf({ 0 })` we just return `Unowned`.
This is generating many false positives, which are really hard to debug.
Here I'm special-casing any abstract method whose return type is equal to that of it's only argument, to return conditional ownership.
Reviewed By: da319
Differential Revision: D8947992
fbshipit-source-id: 33c7e952d
Summary:
Currently, some blocking calls are turning up too many false positives. Adjust severities by fix rate/preexisting numbers.
Also, restrict some calls to exact class, as opposed to superclasses.
Reviewed By: mbouaziz
Differential Revision: D8850599
fbshipit-source-id: 47543d04a
Summary:
- Do not add actuals of a call as unstable.
- Replace access trie with simple set of paths, which is easier to debug/argue correct.
- Fix bug where a prefix path was searched, as opposed to a *proper* prefix.
- Restrict interface to the minimum so that alternative implementations are easier.
Reviewed By: ilyasergey
Differential Revision: D8573792
fbshipit-source-id: 4c4e174
Summary: C/C++ code can, in some cases, generate a large number of temporary (Sil) variables. Since we are already not reporting races on these, not recording them gives some perf back.
Reviewed By: mbouaziz, jvillard
Differential Revision: D8566999
fbshipit-source-id: 148ac46
Summary: Trying to convert a large int literal to an OCaml int raises an exception. The use case here actually needed a float anyway, so add an API for that.
Reviewed By: jeremydubreil
Differential Revision: D8550410
fbshipit-source-id: 382495b
Summary:
I realized that control variable analysis was broken when we had multiple back-edges for the same loop. This is often the case when we have a switch statement combined with continue in a loop (see `test_switch` in `switch_continue.c`) or when we have disjunctive guards in do-while loops.
This diff fixes that by
- defining a loop by its loophead (the target of its backedges) rather than its back-edges. Then it converts back-edge list to a map from loop_head to sources of the loop's back-edges.
- collecting multiple guard nodes that come from potentially multiple exit nodes per loop head
In addition, it also removes the wrong assumption that an exit node belongs to a single loop head.
Reviewed By: mbouaziz
Differential Revision: D8398061
fbshipit-source-id: abaf288
Summary:
We need to report on non-private methods (the opposite even leads to FPs sometimes on deadlocks). To do this, the domain needs to change so that the interpretation of an order pair `a,b` is no longer "lock `a` is taken in the *current method* and held until lock `b` is taken". Instead the meaning is now "lock `a` is taken in some method *of the same class with the current method* and is held until `b` is taken".
These changes are quite drastic because the previous implementation optimised extensively around the previous use case.
Reviewed By: mbouaziz
Differential Revision: D8395351
fbshipit-source-id: a2bd22b
Summary:
The deadlock reports (the actual string) were too low level, in order to avoid bug hash clashes. Now that we deduplicate this is less of an issue, so it's an opportunity to improve readability.
```
Potential deadlock.
Trace 1 (starts at `void Interproc.interproc1Bad(InterprocA)`) first locks `this` in class `Interproc*` (line 9 in `void Interproc.interproc1Bad(InterprocA)`) and then locks `b` in class `InterprocA*` (line 14 in `void Interproc.interproc2Bad(InterprocA)`).
Trace 2 (starts at `void InterprocA.interproc1Bad(Interproc)`), first locks `this` in class `InterprocA*` (line 37 in `void InterprocA.interproc1Bad(Interproc)`) and then locks `d` in class `Interproc*` (line 42 in `void InterprocA.interproc2Bad(Interproc)`).
```
Reviewed By: mbouaziz
Differential Revision: D8394978
fbshipit-source-id: 671ccb0
Summary:
The deadlock reports (the actual string) were too low level, in order to avoid bug hash clashes. Now that we deduplicate this is less of an issue, so it's an opportunity to improve readability.
```
Potential deadlock.
Trace 1 (starts at `void Interproc.interproc1Bad(InterprocA)`) first locks `this` in class `Interproc*` (line 9 in `void Interproc.interproc1Bad(InterprocA)`) and then locks `b` in class `InterprocA*` (line 14 in `void Interproc.interproc2Bad(InterprocA)`).
Trace 2 (starts at `void InterprocA.interproc1Bad(Interproc)`), first locks `this` in class `InterprocA*` (line 37 in `void InterprocA.interproc1Bad(Interproc)`) and then locks `d` in class `Interproc*` (line 42 in `void InterprocA.interproc2Bad(Interproc)`).
```
Reviewed By: mbouaziz
Differential Revision: D8379328
fbshipit-source-id: bc33983
Summary: Deadlocks can be very noisy, so dedup reports on same line by showing only the one with the shortest trace and a count of the suppressed ones.
Reviewed By: mbouaziz
Differential Revision: D8351148
fbshipit-source-id: 8913db2
Summary: Introduce an annotation that forces the summary of a method to be free of blocking events, without suppressing other reports.
Reviewed By: jeremydubreil
Differential Revision: D8276787
fbshipit-source-id: be9eed8
Summary: Create mechanism for suppressing starvation reports. To do that, refactor and expose a Checkers function.
Reviewed By: mbouaziz
Differential Revision: D8259583
fbshipit-source-id: f5b5a63
Summary:
Use the component of the abstract state `events` to report. This set contains reachability facts about blocking calls and lock acquisitions.
The other component, `order`, contained pairs of a reachable event `e'` from an event option with the semantics that if the option is `None` then we have an element that now goes into `events`, and if the option is `Some e` then the element represents a lock acquired and a trace *from* `e` to `e'`
Now, `order` can be simplified to proper pairs of events, without the option.
Reviewed By: jvillard
Differential Revision: D8227665
fbshipit-source-id: e6f4dac
Summary:
It's useful to test that the bucket a given error is classified as doesn't
change over time without notice.
This records the bucket for *all* the tests, even though some never produce a
bucket. This is to be on the safe size instead of risking to forget adding the
bucket information when the test changes, or when copy/pasting from a test that
doesn't have buckets to one that does.
The implementation is pretty crude: it greps the beginning of the qualifier
string for a `[bucket]`.
Reviewed By: mbouaziz
Differential Revision: D8236393
fbshipit-source-id: b3b1eb9
Summary:
Change the license of the source code from BSD + PATENTS to MIT.
Change `checkCopyright` to reflect the new license and learn some new file
types.
Generated with:
```
git grep BSD | xargs -n 1 ./scripts/checkCopyright -i
```
Reviewed By: jeremydubreil, mbouaziz, jberdine
Differential Revision: D8071249
fbshipit-source-id: 97ca23a
Summary:
There can be multiple reports per line, especially when calling in a method which has itself multiple reports.
When reporting at the callsite, report only the issue with the highest severity (picked manually per type of event).
Deadlocks are not de-duplicated, as they are relatively rare and the info in mupltiple reports may be important.
Reviewed By: mbouaziz
Differential Revision: D8160940
fbshipit-source-id: ea6a5c0
Summary: Track and surface the reasons why a method is assessed to run on the UI thread.
Reviewed By: mbouaziz
Differential Revision: D8096099
fbshipit-source-id: 2403c6c
Summary:
The reported location was always the start of the enclosing procedure, which is wrong in many ways.
A nice side-effect is that some code can then be eliminated and Ondemand.analyze used, avoiding getting the procdescs in the process.
Reviewed By: jeremydubreil
Differential Revision: D8056306
fbshipit-source-id: 67c2c8d
Summary:
Before we were computing the size of an abstract state (`range`) using the `NonNegativeBound` domain but it wasn't able to express product of symbolic values.
This diff introduces a domain for that.
The range of an interval is still computed in `NonNegativeBound` but then the product is done in `TopLiftedPolynomial` so all costs end up being of that type.
The //symbols// of a polynomial are `NonNegativeBound` (so the polynomial only represent non-negative values, perfect for a cost), which handles substitution correctly, i.e. it gives zero instead of negative values.
Reviewed By: ddino
Differential Revision: D7397229
fbshipit-source-id: 6868bb7
Summary:
The annotation UiThread can, and is, used on classes as opposed to just methods, so extend the modelling to account for this.
Also, consider the annotation hereditary.
Reviewed By: jeremydubreil
Differential Revision: D7910762
fbshipit-source-id: 0df2c81
Summary: Without the class name, it is not always clear from the error message where the method expecing non-null parameters defined.
Reviewed By: mbouaziz
Differential Revision: D7919492
fbshipit-source-id: 044fb83
Summary:
Make the starvation checker enabled by default.
Add a deadlock issue type, distinct to starvation, which will be kept for UI thread starvation.
Add checks so that checker will do nothing on non-Java code.
Reviewed By: mbouaziz, ddino
Differential Revision: D7908381
fbshipit-source-id: 889f373
Summary: Calling Future.get from UI thread, or under a lock the UI thread may try to take has been associated with ANRs.
Reviewed By: ddino
Differential Revision: D7859296
fbshipit-source-id: b87bd94
Summary:
This simplifies the frontends and backends in most cases. Before this diff,
returning `void` could be modelled either with a `None` return, or a dummy
return variable with type `Tvoid`. Now it's always the latter.
Reviewed By: sblackshear, dulmarod
Differential Revision: D7832938
fbshipit-source-id: 0a403d1
Summary:
The abstract interpreter tried to handle exceptional control-flow by propagating the *pre* of a block that threw an exception rather than the *post*.
This was a half-measure that isn't correct when an exception-throwing instruction isn't in the middle of a block.
The handling of exceptions wasn't actually used anywhere and was leading to further hacks in `ProcCfg`, so let's get rid of it.
Reviewed By: mbouaziz, jvillard
Differential Revision: D7843872
fbshipit-source-id: 2a4a815
Summary: We already suppress race reports if the field is marked in this way; makes sense to do the same thing for these reports.
Reviewed By: ngorogiannis
Differential Revision: D7589275
fbshipit-source-id: 8f0aeab
Summary:
Report nullable inconsistencies by relying on the bytecode, and not on the presence of analysis summary on disk.
This use the `--external-java-packages` to avoid reporting inconsistencies outside of the codebase.
Reviewed By: sblackshear
Differential Revision: D7481101
fbshipit-source-id: 281135d
Summary: This was causing false positives when returning the constant integer 0.
Reviewed By: sblackshear
Differential Revision: D7330143
fbshipit-source-id: 45d19dd
Summary:
At the moment, Java and Clang sources/sinks live in the same inferconfig entry.
If we try to parse a Java procedure that happens to be an invalid Clang qualified name (e.g., `MyClass.<init>`),
parsing will crash.
As a temporary fix, throw an exception and catch it instead.
In the future, we can avoid this by requiring that JSON source/sink specifications to indicate the language.
Reviewed By: mbouaziz
Differential Revision: D7291880
fbshipit-source-id: f8f4502
Summary: Add a new command-line option `--external-java-packages` which allows the user to specify a list of Java package prefixes for external packages. Then the analysis will not report non-actionable warnings on those packages (e.g., inconsistent `Nullable` annotations in external packages).
Reviewed By: jeremydubreil
Differential Revision: D7126960
fbshipit-source-id: c4f3c7c
Summary:
See comment--`Prop(resType = blah) myProp` will generate `.myProp`, `.myPropRes`, and `.myPropAttr`, and any of them can be used to set the prop.
Because our annotation parameter parsing is a bit primitive, handle this by simply checking the `Res` and `Attr` suffixes for every `Prop`.
This shouldn't lead to false negatives because these methods will only exist if the `resType` annotation is specified anyway.
Reviewed By: jeremydubreil
Differential Revision: D6955362
fbshipit-source-id: ec59b21
Summary:
The boolean lock domain is simple and surprisingly effective.
But it's starting to cause false positives in the case where locks are nested.
Releasing the inner lock also releases the outer lock.
This diff introduces a new locks domain: a map of locks (access paths) to a bounded count representing an underapproximation of the number of times the lock has been acquired.
For now, we just use a single dummy access path to represent all locks (and thus a count actually would have been sufficiently expressive; we don't need the map yet).
But I'm planning to remove this limitation in a follow-up by refactoring the lock models to give us an access path.
Knowing the names of locks could be useful for error messages and suggesting fixes.
Reviewed By: jberdine
Differential Revision: D6182006
fbshipit-source-id: 6624971
Summary:
Previously, we could understand than an access was safe either because it was possibly owned or protected by a thread/lock, but not both. If an access was both protected by a lock and rooted in a paramer (i.e., possibly owned), we would forget the ownership part of the precondition and remember only the lock bit. This leads to false positives in cases where an access protected by a lock is owned, but another unowned access to the same memory is not protected by a lock (see the new `unownedLockedWriteOk` E2E test for an example).
This diff makes access safety conditions disjunctive so we can simultaneously track whether an access is owned and whether an access is protected by a thread/lock. This will fix false positives like the one explained in T24015160.
Reviewed By: jberdine
Differential Revision: D6671489
fbshipit-source-id: d17715f
Summary:
We already knew not to warn when non-resource `Closeable`'s like `ByteArrayOutputStream` weren't closed, but we still warned on their subtypes.
This diff fixes that problem by checking subclasses in the frontend.
This also removes the need for Java source code models of non-resource types, so I removed them.
Reviewed By: jeremydubreil
Differential Revision: D6843413
fbshipit-source-id: 60fe7fb
Summary: This should allow to report several occurences of the an issue appearing several times within the same method.
Reviewed By: jvillard
Differential Revision: D6783298
fbshipit-source-id: 5555906
Summary:
This lets us fix the limitation of reporting false positives when a `private` function calls `build()` on a parameter without passing all of the required props.
We will now report such issues in the caller only if it fails to pass the required props.
An unfortunate consequence of this change is that we lose track of where the actual call to `build` occurs--we now report on the declaration of the caller function rather than on the call site of `build`.
I'll work on addressing that in a follow-up.
Reviewed By: jeremydubreil
Differential Revision: D6764153
fbshipit-source-id: 3b173e5
Summary: At each call to `Component$Builder.build()`, checks that the required props for `Component` have been set via prior calls to the `Builder`. Does not yet handle `Prop(optional = true)`, but will address that in a follow-up.
Reviewed By: jeremydubreil
Differential Revision: D6735524
fbshipit-source-id: 0c812fd
Summary:
In Java, static variables are distinguished by package/class:
the file where they are defined doesn't matter.
Fixes#831.
Closes https://github.com/facebook/infer/pull/833
Reviewed By: jeremydubreil
Differential Revision: D6661240
Pulled By: sblackshear
fbshipit-source-id: beeb2f9
Summary: There was a back and forth conversion between `string` and `IssueType.t` which was not necessary.
Reviewed By: sblackshear
Differential Revision: D6562747
fbshipit-source-id: 70b57a2
Summary: This will avoid collisions when the inner classes are implementing the same methods. For example, the previous version of the bug hash could conflate the issues when several annonymous inner classes are implementing the same method, e.g. a annonymous subclass of `Runnable` implementing `run()`.
Reviewed By: sblackshear
Differential Revision: D6461594
fbshipit-source-id: 2bb8545
Summary:
Simpler bug hash that is more independent of the underlying analysis. This now computes the hash based on:
- the bug type.
- the base filename: i.e for my/source/File.java, just keep File.java. So the hash will not change when moving files around.
- the simple method name: i.e. without package information and list of parameters. So changing the list of parameters will not affect the bug hash.
- the error message were the line numbers have been removed. So moving code or reformatting will not affect the hash.
Reviewed By: jberdine
Differential Revision: D6445639
fbshipit-source-id: 82e3cbe
Summary: The clang compiler introduces a materialized temporary expression which should be treated similarly to the Infer internal temporary variables.
Reviewed By: sblackshear
Differential Revision: D6331237
fbshipit-source-id: 81d8196
Summary: This only works for Java at the moment but we can re-organise the code later to add the Objective C equivalent of these assertion methods.
Reviewed By: mbouaziz
Differential Revision: D6230588
fbshipit-source-id: 46ee98e
Summary: The Java bytecode does not contain information about the location of abstract of interface methods. Before this diff, the analysis trace was tuncated and the file where the abstract or interface method was not included in the trace, which makes it harder to understand the Infer report, especially when the method is on a generated file that is not checked in the repository.
Reviewed By: sblackshear
Differential Revision: D6223612
fbshipit-source-id: c80c6f2
Summary: More general version of the fix in D6138749. This diff moves RacerD's lock modeling into a separate module and uses the module in the HIL translation to check when a function has lock/unlock semantics.
Reviewed By: jberdine, da319
Differential Revision: D6191886
fbshipit-source-id: 6e1fdc3
Summary:
In a summary, you never want to see a trace where non-footprint sources flow to a sink.
Such a trace is useless because nothing the caller does can make more data flow into that sink.
Reviewed By: jeremydubreil
Differential Revision: D5779983
fbshipit-source-id: d06778a
Summary:
If you write
```
boolean readUnderLockOk() {
synchronized (mLock) {
return mField;
}
}
```
it will be turned into
```
lock()
irvar0 = mField
unlock()
return irvar0
```
in the bytecode. Since HIL eliminates reads/writes to temporaries, it will make the above code appear to perform a read of `mField` outside of the lock.
This diff fixes the problem by forcing HIL to perform all pending reads/writes before you exit a critical section.
Reviewed By: jberdine
Differential Revision: D6138749
fbshipit-source-id: e8ad9a0
Summary: This check is deprecated and will be replaced by a dedicated checker to detect unitialized values.
Reviewed By: mbouaziz
Differential Revision: D6133108
fbshipit-source-id: 1c0e9ac
Summary: In preparation for making `-a checkers` the default (when no analyzer is specified), let's test `-a checkers` by default.
Reviewed By: mbouaziz
Differential Revision: D6051177
fbshipit-source-id: d8ef611
Summary:
Refactor `RegisterCheckers` to give a record type to checkers instead of a tuple type.
Print active checkers with their per-language information.
Improve the manual entries slightly.
Reviewed By: sblackshear
Differential Revision: D6051167
fbshipit-source-id: 90bcb61
Summary:
Whenever we see a use of a lock, infer that the current method can run in a multithreaded context. But only report when there's a write under a lock that can be read or written without synchronization elsewhere.
For now, we only infer this based on the direct usage of a lock; we don't assume a caller runs in a multithreaded context just because its (transitive) callee can.
We can work on that trickier case later, and we can work on smarter inference that takes reads under sync into account. But for now, warning on unprotected writes of reads that occur under sync appears to be too noisy.
Reviewed By: jberdine
Differential Revision: D5918801
fbshipit-source-id: 2450cf2
Summary:
This was a crutch from the days before ownership analysis.
We shouldn't need it anymore, and it was actually causing FP's because we were skipping analysis of `ImmutableList.builder()` and not understanding that the return value is owned.
Reviewed By: jeremydubreil
Differential Revision: D6035631
fbshipit-source-id: afa0ade
Summary:
This generates `--resource-leak-only` automatically, and make the other
checkers' `-only` option work as expected with respect to `--resource-leak` too
(eg, `--resource-leak --biabduction-only` disables resource leak).
Reviewed By: jeremydubreil
Differential Revision: D6051134
fbshipit-source-id: 2d4a2ba
Summary:
1. Mark some Makefile targets as depending on `MAKEFILE_LIST` so they get rebuilt on Makefile changes
2. Do not show boolean options with no documentation in the man pages (like we do for other option types).
3. Default to Lazy dynamic dispatch for the checkers.
4. In the tests, use `--<checker>-only` instead of relying on `--no-default-checkers`
5. `--no-filtering` is redundant if `--debug-exceptions` is passed
Reviewed By: jeremydubreil
Differential Revision: D6030578
fbshipit-source-id: 3320f0a
Summary: We will then be able to merge the tests for the other checkers without affecting these lab tests
Reviewed By: jvillard
Differential Revision: D6039433
fbshipit-source-id: e575ce9
Summary:
Another step toward running the biabduction analysis as a checker.
Depends on D6038210
Reviewed By: jvillard
Differential Revision: D6038682
fbshipit-source-id: fed45bf
Summary: Now that we report write-write races involving more than one write, we need to improve the traces accordingly.
Reviewed By: jberdine
Differential Revision: D6026845
fbshipit-source-id: b1366dd
Summary:
Previously, annotating something ThreadSafe meant "check that it is safe to run all of this procedure's methods in parallel with each other" (including self-parallelization).
This makes sense, but it means that if the user writes no annotations, we do no checking.
I'm moving toward a model of inferring when an access might happen on a thread that can run concurrently with other threads, then automatically checking that it is thread-safe w.r.t to all other accesses to the same memory (on or off the current thread thread).
This will let us report even when there are no `ThreadSafe` annotations.
Any method that is known to run on a new thread (e.g., `Runnable.run`) will be modeled as running on a thread that can run in parallel with other threads, and so will any method that is `synchronized` or acquires a lock.
In this setup, adding `ThreadSafe` to a method just means: "assume that the current method can run in parallel with any thread, including another thread that includes a different invocation of the same method (a self race) unless you see evidence to the contrary" (e.g., calling `assertMainThread` or annotating with `UiThread`).
The key step in this diff is changing the threads domain to abstract *what threads the current thread may run in parallel with* rather than *what the current thread* is. This makes things much simpler.
Reviewed By: jberdine
Differential Revision: D5895242
fbshipit-source-id: 2e23d1e
Summary:
Indicate if read or write is protected, and do not print only the
field but also the object involved in the race.
Reviewed By: sblackshear
Differential Revision: D5974250
fbshipit-source-id: 351a576
Summary:
This diff does two things:
# Infer no longer add the contrains that the return value of a skip function is never null. This was leading to false negatives and is not necessary as those return value are treated angelically
# Infer now support `Nonnull` on the return value of skip functions.
Reviewed By: jberdine, sblackshear
Differential Revision: D5840324
fbshipit-source-id: bbd8d82
Summary: Infer can then detect the resource leak when resources are stored into a container
Reviewed By: sblackshear
Differential Revision: D5887702
fbshipit-source-id: 6106cfb
Summary: The point of the tracing mode is to compute all the possible path leading to an error state. However, within a method, many of those paths are not feasibile in practice. This leads to many false alarms for the resource leak analysis.
Reviewed By: sblackshear
Differential Revision: D5888695
fbshipit-source-id: 2dbc57b
Summary: Model the `remove(...)` and the `clear()` method of `HashMap`.
Reviewed By: sblackshear
Differential Revision: D5887674
fbshipit-source-id: c3f40ee
Summary: Handling the utility functions for asserting that we're on background thread.
Reviewed By: jberdine
Differential Revision: D5863435
fbshipit-source-id: 3ad95b5
Summary:
Previously, we just tracked a boolean representing whether we were possibly on the main thread (true) or definitely not on the main thread (false).
In order to start supporting `Thread.start`, `Runnable.run`, etc., we'll need something more expressive.
This diff introduces a lattice:
```
Any
/ \
Main Background
\ /
Unknown
```
as the new threads domain. The initial value is `Unknown`, and we introduce `Main` in situations where we would have introduced `true` before.
This (mostly) preserves behavior: the main difference is that before code like
```
if (*) {
assertMainThread()
} else {
x.f = ...
}
```
would have recorded that the access to `x.f` was on the main thread, whereas now we'll say that it's on an unknown thread.
Reviewed By: peterogithub
Differential Revision: D5860256
fbshipit-source-id: efee330
Summary:
It's useful to be able to disable de-duplication on the command line with `--no-filtering`.
Gate de-duplication with `Config.filtering` and move the de-duplication tests to a new directory under the build systems tests.
Reviewed By: jeremydubreil
Differential Revision: D5865329
fbshipit-source-id: 5094f5b
Summary:
Since D5381239, infer is careful not to delete directories that do not "look
like" results directories on startup, in case the user passed, eg, `-o /`.
In our repo, lots of results dir are created by build/test of infer, and when
the version of infer changes and the expected contents of results directories
change then it might start refusing to delete the results directories created
with another version of infer.
Add an option to force infer to delete the results directory no matter how
dodgy it looks, and use it in our repo by adding the option in every
.inferconfig.
Reviewed By: mbouaziz
Differential Revision: D5870984
fbshipit-source-id: 09412de
Summary:
Sort the complete set of warnings by everything except procname, then de-duplicate.
This scheme prevents reporting identical error messages on the same line/same file.
This is important for avoiding duplicate reports on multiple instantiations of the same template.
Reviewed By: jberdine
Differential Revision: D5819467
fbshipit-source-id: 984f47f
Summary: The resolution was previously only happening for constructors, but calls to private methods or to `super` are also neither static calls nor virtual calls. In this case, the resolution logic should be the same as for constructors.
Reviewed By: sblackshear
Differential Revision: D5830376
fbshipit-source-id: 9b56f80
Summary: With this diff, the analysis trace will jump to the definition of the skipped methods when the location is known. This is especially useful when the analysis is relying on the method annotations.
Reviewed By: sblackshear
Differential Revision: D5783428
fbshipit-source-id: 561b739
Summary: The list of fields of a Java object in SIL is the list of fields declared in the class plus all the fields declared in the the super classes. It turns out that we were missing the fields declared in the implemented interfaces.
Reviewed By: sblackshear
Differential Revision: D5720386
fbshipit-source-id: d65c9de
Summary: With this, we can now get now get inter-procedural issues involving native methods.
Reviewed By: sblackshear
Differential Revision: D5730638
fbshipit-source-id: 3bdbdbd
Summary: This makes the traces more readable when involving skipped functions.
Reviewed By: sblackshear
Differential Revision: D5731683
fbshipit-source-id: 49d363b
Summary:
A function can both be a sink and propagate source info, but we currently ignore the summary for any function that is also a sink.
This will cause us to under-report for (e.g.) `src1 = source(); src2 = strcpy(dest, src1); exec(src2)`.
This is both a potential buffer overflow and a potential shell injection, but we won't report the second issue.
Reviewed By: jberdine
Differential Revision: D5676167
fbshipit-source-id: 232ab2f
Summary: This check is not possible in Java as it natirally happens in the totally legit case of the `try ... finally`.
Reviewed By: sblackshear
Differential Revision: D5568802
fbshipit-source-id: 24ca074
Summary:
Instead of a whitelist and blacklist and default issue types and default
blacklist and filtering, consider a simpler semantics where
1. checkers can be individually turned on or off on the command line
2. most checkers are on by default
3. `--no-filtering` turns all issue types on, but they can then be turned off again by further arguments
This provides a more flexible CLI and is similar to other options in the infer
CLI, where "global" behaviour is generally avoided.
Dynamically created checkers (eg, AL linters) cause some complications in the
implementation but I think the semantics is still clear.
Also change the name of the option to mention "issue types" instead of
"checks", since the latter can be confused with "checkers".
Reviewed By: jberdine
Differential Revision: D5583238
fbshipit-source-id: 21de476
Summary:
We previously lumped ownership predicates in with all other predicates. That limited us to a flat ownership domain.
This diff separates out the ownership predicates so we can have a richer lattice of predicates with each access path.
This lets us be more precise; for example, we can now show that
```
needToOwnBothParams(Obj o1, Obj o2) {
Obj alias;
if (*) { alias = o1; } else { alias = o2; }
alias.f = ... // both o1 and o2 need to be owned for this to be safe
}
void ownBothParamsOk() {
needToOwnBothParams(new Obj(), new Obj()); // ok, would have complained before
}
```
is safe.
Reviewed By: jberdine
Differential Revision: D5589898
fbshipit-source-id: 9606a46
Summary:
Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds:
```
times in 10ms, ±differences measured in speedups, 4 cores
| | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys |
|-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------|
| byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 |
| native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 |
| byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 |
| change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 |
| change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 |
| change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 |
| change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 |
| change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 |
| change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 |
#+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2
50 cores
| | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys |
|---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------|
| byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 |
| native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 |
| byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 |
#+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2
```
Menu:
1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in
some information at build-time (really, at configure time, but TODO), such as
whether or not clang is enabled.
2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file
3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help.
4. jbuilder does not support subdirectories, so resort to listing all the
source files in the generated jbuild (only source directories need to be
manually listed in jbuild.in though). Still, the generated .merlin is wrong
and makes merlin find source files in _build, so manually tune it to get
good merlin support. We also lose some of merlin for unit tests as it
cannot see their build artefacts anymore.
5. checkCopyright gets its own jbuild because it's standalone. Also, remove
some deprecation warnings in checkCopyright due to the new version of Core from
a while ago.
6. Drop less-used Makefile features (they had regressed anyway) such as
building individual modules. Also, building mod_dep.pdf now takes all the
source files available so they better build (before, it would only take the
source files from the config, eg with or without clang) (that's pretty minor).
7. The toplevel is now built as a custom toplevel because that was easier. It
should soon be even easier: https://github.com/janestreet/jbuilder/issues/210
8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about
interface files without implementations.
In particular, I did not try to migrate too much of the Makefile logic to jbuilder,
more can be done in the future.
Reviewed By: jberdine
Differential Revision: D5573661
fbshipit-source-id: 4ca6d8f
Summary:
When a sink name is specified in `.inferconfig` or in OCaml, it might conflict with a function of the same name that has a different number of args.
We shouldn't try to create a sink in this case, and we definitely shouldn't crash.
Reviewed By: jeremydubreil
Differential Revision: D5561216
fbshipit-source-id: fa1859b
Summary: Those are not particularly relevant for the biabduction analysis. It would be easy to have a dedicated checker for this if we happen to need one day.
Reviewed By: sblackshear
Differential Revision: D5530834
fbshipit-source-id: 316e60f
Summary:
The Eradicate `Nullable` checker should now be run using:
infer -a checkers --eradicate ...
Reviewed By: mbouaziz
Differential Revision: D5529226
fbshipit-source-id: 0de2956
Summary:
This is unsound but will help the analysis to report less false alarms with the common pattern:
if (a.get() != null) {
a.get().foo();
}
Reviewed By: sblackshear
Differential Revision: D5528227
fbshipit-source-id: 750db4a
Summary: This was reusing the side effects of the `add_constraints_on_retval` for the final purpose of being angelic and just assigning a fresh value to the lhs of the load.
Reviewed By: sblackshear
Differential Revision: D5507037
fbshipit-source-id: ec1c89c
Summary:
Works the same way as read/write races on fields, except that are more relaxed (er, unsound) in deciding whether two containers may alias.
This is needed to avoid reporting a ton of FP's; full explanation in comments.
Reviewed By: da319
Differential Revision: D5493404
fbshipit-source-id: 0a5d8b1
Summary:
The way we represented container writes before was pretty hacky: just use a dummy field for the name of the method that performs the container write.
This diff introduces a new access kind for container writes that is much more structured.
This will make it easier to soundly handle aliasing between containers and support container reads in the near future.
Reviewed By: da319
Differential Revision: D5465747
fbshipit-source-id: e021ec2
Summary: Using a dedicated abstract domain, like Quandary does, is more suitable for taint analysis.
Reviewed By: sblackshear
Differential Revision: D5473794
fbshipit-source-id: c917417
Summary: We get the wrong answer on most of them for now, but that is expected
Reviewed By: ngorogiannis
Differential Revision: D5429242
fbshipit-source-id: 4899079
Summary:
This just makes the warnings silent for now. We may improve the analysis to check if the null check on the captured fields are consistent with the annotation on the corresponding parameters.
Eradicate also has the same issue. I added a test to outline this. The biabduction analysis will also probably fail on the same of annotation lookup. We may want implement the proper fix at the level of `Annotation.field_has_annot`.
Reviewed By: sblackshear
Differential Revision: D5419243
fbshipit-source-id: 6460de8
Summary: Adding to the Quandary tests, the list of tests that are already working for the bi-abduction based taint analysis.
Reviewed By: sblackshear
Differential Revision: D5395734
fbshipit-source-id: c4f2e79
Summary: We had a model for `Pools.SimplePool`, but were missing models for `Pools.Pool`. Since `SimplePool` and `SynchronizedPool` both extend `Pool`, modeling it should cover all of the cases.
Reviewed By: ngorogiannis
Differential Revision: D5236280
fbshipit-source-id: 9bbdb25
Summary:
:
No longer use deprecated reporting function for the suggest nullable checker
Depends on D5205009
Reviewed By: grievejia
Differential Revision: D5205843
fbshipit-source-id: f6dd059
Summary:
Read/write race errors should always show one trace for a read and one trace for a write.
We forget to pass the conflicting writes to the reporting function in one case, which prevented us from showing a well-formed trace.
Fixed it by making the `conflicts` parameter non-optional
Reviewed By: jberdine
Differential Revision: D5209332
fbshipit-source-id: 05da01a
Summary: We were almost always using `~report_reachable:true`, and in the cases where we weren't it is fine to do so. In general, a sink could read any state from its parameters, so it makes sense to complain if anything reachable from them is tainted.
Reviewed By: mbouaziz
Differential Revision: D5169067
fbshipit-source-id: ea7d659
Summary:
For now, we just support clearing the taint on a return value.
Ideally, we would associate a kind with the sanitizer and only clear taint that matches that kind.
However, it's fairly complicated to make that work properly with footprint sources.
I have some ideas about how to do it with passthroughs instead, but let's just do the simple thing for now.
Reviewed By: jeremydubreil
Differential Revision: D5141906
fbshipit-source-id: a5b8b5e
Summary: Using Conjunction for thread join has known false negatives. Finer grained recording of threading information fixes this.
Reviewed By: sblackshear
Differential Revision: D5111161
fbshipit-source-id: aab483c
Summary: This fixes a couple of false positives as objects of BufferedReader don't need to be closed if the wrapped reader resource gets closed correctly.
Reviewed By: sblackshear
Differential Revision: D5106596
fbshipit-source-id: 725fb80
Summary: Useful to have Eradicate and Biabduction agree on how to inform that the analysis that some objects are not null.
Reviewed By: sblackshear
Differential Revision: D5075127
fbshipit-source-id: 9e56981
Summary:
First step to be able to enable and disable the checkers to run in the following form:
> infer -a checkers --checker1 --checker2 --checker3 -- ...
and have a predefined list of checkers that are run by default with:
> infer -a checkers -- ...
Reviewed By: sblackshear
Differential Revision: D5007377
fbshipit-source-id: d7339ef
Summary:
Before we understood ownership, we needed this to avoid a mountain of Builder-related FP's.
Now that we have fairly sophisticated understanding of ownership, we can kill this hack.
Reviewed By: jaegs
Differential Revision: D4940238
fbshipit-source-id: 8d86e57
Summary: The purpose of the annotation reachability analysis is to report when a method annotated with `X` never calls, directly or indirectly, another method annotated with `Y`. However, there can be different call stacks following different execution paths from `X` to `Y`. Reporting more than one call stack ending with the same annotated procedure does not bring more signal to the end user. So the purpose of this diff is to avoid those duplicated reports and report at most one annotation reachability issue per end of call stack.
Reviewed By: sblackshear
Differential Revision: D4942765
fbshipit-source-id: 46325a7
Summary: Sawja assigns them on multiple control-flow paths, so they're not SSA.
Reviewed By: peterogithub
Differential Revision: D4896745
fbshipit-source-id: c805216
Summary:
There are false positives in the current analysis due to the
use of conjunction in the treatment of threaded. Changing conjunction to disjunction
removes these false positives. Some new false negatives arise, but all the old tests pass.
This is a stopgap towards a better solution being planned.
Reviewed By: sblackshear
Differential Revision: D4883280
fbshipit-source-id: c2a7e6e
Summary:
If we couldn't project the callee access path into the caller during summary application, we still added the corresponding trace to the caller state.
This was wasteful; it just bloats the caller with state it will never look at.
Fixed it by making `get_caller_ap_node` return `None` when the state won't be visible in the caller.
Reviewed By: jeremydubreil
Differential Revision: D4727937
fbshipit-source-id: 87665e9
Summary: This should make the reports much easier to understand. We can generalize to reporting a stack trace for all of the writes in the future if we wish.
Reviewed By: peterogithub
Differential Revision: D4845641
fbshipit-source-id: 589fdbc
Summary: If two public methods touch the same state and only one is marked `ThreadSafe`, it's reasonable to report unsafe accesses on both of them.
Reviewed By: peterogithub
Differential Revision: D4785038
fbshipit-source-id: 5a80da4
Summary:
*Unless* the unprotected write runs on the main thread and the read doesn't.
Otherwise, we'll already report on the unprotected write, and we don't want to duplicate.
Reviewed By: peterogithub
Differential Revision: D4798357
fbshipit-source-id: 5de06a0
Summary:
This is step further simplify the code to avoid cases where the summary of the procedure being analyzed can exist in two different versions:
# one version is the summary passed as parameter to every checker
# the other is a copy of the summary in the in-memory specs table
This diff implements:
# the analysis always run through the `Ondemand` module (was already the case before)
# the summary of the procedure being analyzed is created at the beginning of the on-demand analysis call
# all the checkers run in sequence, update their respective part of the payload and log errors to the error table
# the summary is store at the end of the on-demand analysis call
Reviewed By: sblackshear
Differential Revision: D4787414
fbshipit-source-id: 2d115c9
Summary:
Adds a new type and branching for a missing path of execution.
closes#575
Reviewed By: jvillard
Differential Revision: D4738681
fbshipit-source-id: f72344c
Summary:
It can be useful when debugging infer or the Makefiles themselves to see what
`make` is doing. Instead of editing Makefiles to remove `@` now you can `make
VERBOSE=1`.
This is just `git ls-files | grep -e Makefile -e '.*\.make' | xargs sed -e 's/^\t@/\t$(QUIET)/' -i`, and adding the definition of `QUIET` to Makefile.config.
Reviewed By: jeremydubreil
Differential Revision: D4779115
fbshipit-source-id: e6e4642
Summary:
No new functionality here; mostly `FN_` tests documenting our current limitations.
Will start chipping away at the false negatives in follow-up diffs.
Reviewed By: peterogithub
Differential Revision: D4780013
fbshipit-source-id: 7a0c821
Summary: Bringing the logic back to where it was before the big refactoring of the reporting logic.
Reviewed By: peterogithub
Differential Revision: D4774541
fbshipit-source-id: afeaaf8
Summary:
Move all of the reporting on top of the aggregation functionality.
This lets us delete lots of code
Reviewed By: peterogithub
Differential Revision: D4772223
fbshipit-source-id: 47cc51a
Summary:
This was the one type of races we were not yet reporting (besides ones that use the wrong synchronization :)).
Wrote new utility function to aggregate all accesses by the memory they access.
This makes it easy to say which accesses we should report and what their conflicts are.
Eventually, we can simplify the reporting of other kinds of unsafe accesses using this structure.
Reviewed By: peterogithub
Differential Revision: D4770542
fbshipit-source-id: 96d948e
Summary:
For collections whose type does not express that the collection is thread-safe (e.g., `Collections.syncrhonizedMap` and friends).
If you annotate a field holding one of these collections, we won't warn when you mutate the collection.
Reviewed By: jeremydubreil
Differential Revision: D4763565
fbshipit-source-id: 58b487a
Summary: It seems that we were not really using the `Bottom` part of the domain as a pair of (empty call map, empty tracking var map) was already acting as bottom.
Reviewed By: sblackshear
Differential Revision: D4759757
fbshipit-source-id: 53dedfe
Summary:
Most of our tests work by comparing the output of some command to a baseline
expected output. It's often needed to update that baseline.
Previously, that was crudely done by attempting to move every foo.exp.test file
to foo.exp. This does not work terribly well, in particular because
foo.exp.test might be stale.
Instead, add a `replace` target to every test that knows how to update the
baseline. This allows custom behaviours too, eg in the differential tests.
Most of the tests include base.make or differential.make, so add a replace target
there. A few tests are completely custom, add a replace target to them too.
Reviewed By: jeremydubreil
Differential Revision: D4754279
fbshipit-source-id: ec34273
Summary:
If I read off the main thread and write on the main we
could have a race. (Writes off main are already reported.)
Reviewed By: sblackshear
Differential Revision: D4746138
fbshipit-source-id: 8b6e9c5
Summary:
One limitation of Eradicate is that certain nullability patterns are not expressible using simply the `Nullable` annotation.
One such pattern is using the knowledge that a function returns null when passed null, but returns an object otherwise.
The annotation `PropagatesNullable` is a variant of `Nullable` applied to parameters when their value propagates to the return value.
A method annotated
```
B m(PropagatesNullable A x) { return x == null ? x : B(x); }
```
indicates that `m` returns null if `x` is null, or an object of class `B` if the argument is not null.
Examples with multiple parameters are in the test cases.
This diff builds some infrastructure for annotation transformers: the example above represents the identity function on nullability annotations.
Reviewed By: jvillard
Differential Revision: D4705938
fbshipit-source-id: 9f6194e
Summary:
Before, `trace_of_pname` only grabbed unprotected writes from the summary, so the traces ending in an unprotected read were truncated.
We now look at reads too when appropriate.
Reviewed By: peterogithub
Differential Revision: D4719740
fbshipit-source-id: 28f6e63
Summary: Now, running `infer -a checkers -- ...` will also run the ThreadSafety checker
Reviewed By: sblackshear
Differential Revision: D4691330
fbshipit-source-id: 04fc781
Summary: Run all the checkers one after each other, which allows the Infer AI framework to run several checkers together, including the possibility for them to collaborate.
Reviewed By: sblackshear
Differential Revision: D4621838
fbshipit-source-id: e264d67
Summary:
This makes sure that one can run `./build-infer.sh` then `make`. Otherwise it's
not always clear what one should do to recompile infer, eg when `make` will
work and when `./build-infer.sh` should be used instead, in particular when the
user doesn't have opam configured for her terminal.
Reviewed By: jberdine
Differential Revision: D4698159
fbshipit-source-id: 5df8059
Summary:
When both an unprotected write and a read/write race emanate from the same line,
undoubtedly because of interprocedurality, strip the read/write report (for now).
Perhaps report the info in more succinct form later, but keep to one report/line.
Reviewed By: sblackshear
Differential Revision: D4685102
fbshipit-source-id: 291cf20
Summary:
There was a bug where we allowed ourselves to project local variables from the callee summary into an access path in the caller.
We should only be able to project callee variables that are in the footprint.
Reviewed By: jeremydubreil
Differential Revision: D4684868
fbshipit-source-id: 53a2b9d
Summary:
Eradicate detects circular field initializations (e.g. a field initialized with itself)
by checking in the typestate at the end of the constructor whether the origin
of the field is a field name in the current class.
This has the problem that the following initialization pattern is not recognized as correct:
C(C x) { this.field = x.field }
To fix the issue, the origin information for field accesses x.f is extended
with the origin information of the inner object x.
Circularities are detected if the origin of x is "this".
Reviewed By: jberdine
Differential Revision: D4672472
fbshipit-source-id: 9277bdd
Summary: Previously, we wouldn't report races where the write was under synchronization.
Reviewed By: peterogithub
Differential Revision: D4658850
fbshipit-source-id: e9f4c41
Summary: I encountered cases where the class name part of the method name was passed as `(None, "package.Class")` instead of `("package", "Class")` and therefore incorrectly failing some inequality checks
Reviewed By: sblackshear
Differential Revision: D4662617
fbshipit-source-id: 98ee3e3
Summary:
Stop multiple reports per line happening. These come about
because of interprocedural access to multiple fields. Present one trace,
and summary information about other accesses.
Reviewed By: sblackshear
Differential Revision: D4636232
fbshipit-source-id: 9039fea
Summary:
All intermediate `.exp` files used for tests can be generated with custom info, based on what is needed for the tests purposes.
This customisation happens via command-line argument `--issues-fields`.
Reviewed By: cristianoc, jvillard
Differential Revision: D4628062
fbshipit-source-id: feaa382
Summary:
- The package declaration was wrong
- There was a leftover copy-pasted resource leak test from `CursorLeak.java`.
Reviewed By: sblackshear
Differential Revision: D4612687
fbshipit-source-id: 42c1a35
Summary: Rather than having three separate annotations related to checking/assuming thread-safety, let's just have one annotation instead.
Reviewed By: peterogithub
Differential Revision: D4605258
fbshipit-source-id: 17c935b
Summary: distinguish writes via method calls (e.g., add) from writes via assignment in the error messages
Reviewed By: sblackshear
Differential Revision: D4611748
fbshipit-source-id: 7594d3b
Summary: Report at most one read/write race or unprotected write per access path per method
Reviewed By: sblackshear, jvillard
Differential Revision: D4590815
fbshipit-source-id: 3c3a9d9
Summary:
To address a common source of false positives observed in D4494901.
We don't do anything with `release` yet, but can model it as releasing ownership in the future if we want to enforce correct usage of `SynchronizedPool`'s.
Reviewed By: peterogithub
Differential Revision: D4593635
fbshipit-source-id: 621e937
Summary: Reports on reads that have one or more conflicting writes. When you report, say which other methods race with it.
Reviewed By: sblackshear
Differential Revision: D4538793
fbshipit-source-id: 47ce700
Summary: Thread-local variables can't be shared between threads, so it's safe to mutate them outside of synchronization
Reviewed By: jeremydubreil
Differential Revision: D4568316
fbshipit-source-id: 0634cad
Summary:
I couldn't figure out why, but from within an infer release the traces we get
for this test are different than the expected ones. This is even consistent
across osx and linux.
In order to restore sanity, let's just hide this incomprehensible fact. Let's
come back to it if more tests exhibit this, maybe traces are not guaranteed to
be exactly the same across runs.
Reviewed By: sblackshear
Differential Revision: D4559405
fbshipit-source-id: dd88c59
Summary: Should stop us from reporting on benign races of fields that are caching resources.
Reviewed By: peterogithub
Differential Revision: D4538037
fbshipit-source-id: 15236b4
Summary: This annotation can then be used to suppress the warnings on non-android Java projects.
Reviewed By: sblackshear
Differential Revision: D4544858
fbshipit-source-id: 8a0b8fa
Summary:
The Java models for resources are way to complex. The main issue I am facing with these models is that small changes in the analysis can affect the generation of the models in some weird ways. For instance, I get different specs for some of the models between my devserver and my devvm, which seems to be mostly related with the backend treatment of `instanceof`.
The objective here is to simplify the models as much as possible in order to:
1) make debugging regressions easier
2) get simpler specs and less modeled methods shipped in `models.jar`
Reviewed By: sblackshear
Differential Revision: D4536115
fbshipit-source-id: 577183a
Summary: Better documentation, and could perhaps be checked instead of trusted later if the analysis understands threads better.
Reviewed By: jaegs
Differential Revision: D4537463
fbshipit-source-id: 4323c78
Summary: In some cases where a function is called directly on a formal (e.g, `def foo(o) { callSomething(o) }`, we were failing to propagate the footprint trace to the caller.
Reviewed By: jeremydubreil
Differential Revision: D4502404
fbshipit-source-id: d4d632f
Summary: This case was already working but there was no tests for it
Reviewed By: sblackshear
Differential Revision: D4529473
fbshipit-source-id: ca3ff02
Summary: This will be important for maintaining ownership of `View`'s, which involve a lot of casting.
Reviewed By: peterogithub
Differential Revision: D4520441
fbshipit-source-id: fdef226
Summary:
Previously, we would lose track of ownership in code like
```
Obj owned = new Obj();
Obj stillOwned = id(owned); // would lose ownership here
stillOwned.f = ... // would report false alarm here
```
This diff partially addresses the problem by adding a notion of "unconditional" (always owned) or "conditional" (owned if some formal at index i is owned) ownership.
Now we can handle simple examples like the one above.
I say "partially" because we still can't handle cases where there are different reasons for conditional ownership, such as
```
oneOrTwo(Obj o1, Obj o2) { if (*) return o1; else return o2; } // we won't understand that this maintains ownership if both formals are owned
Obj stillOwned = oneOrTwo(owned1, owned2);
stillOwned.f = ... // we'll report a false alarm here
```
This can be addressed in the future, but will require slightly more work
Reviewed By: peterogithub
Differential Revision: D4520069
fbshipit-source-id: 99c7418
Summary: This fixes a wrong level of indirection when performing the type substitution.
Reviewed By: sblackshear
Differential Revision: D4521008
fbshipit-source-id: 7324ea6
Summary:
This fixes false positives we had in fields written by callees of a constructor (see new E2E test).
This is also a bit cleaner than what we did before; instead of special-casing constructors, we just use the existing ownership concept.
Reviewed By: peterogithub
Differential Revision: D4505161
fbshipit-source-id: a739ebc
Summary:
Constants are always "owned" in the sense that no one can mutate them.
In code like
```
Obj getX(boolean b) {
if (b) {
return null;
}
return new Obj();
}
```
, we need to understand this in order to infer that the returned value is owned.
This should fix a few FP's that I've seen.
Reviewed By: peterogithub
Differential Revision: D4485452
fbshipit-source-id: beae15b
Summary: This should fix the issue with broken invariants when the method specialization on pointer ends up doing a substitution on non pointer types
Reviewed By: sblackshear
Differential Revision: D4487232
fbshipit-source-id: f3fce84
Summary: The method `junit.framework.TestCase.setUp()` is always run before the other methods by the JUnit testing framework. So the method act as a class initializer.
Reviewed By: sblackshear
Differential Revision: D4487371
fbshipit-source-id: 1998801
Summary: Just adding some more test cases on how Infer handles dynamic dispatch.
Reviewed By: jberdine
Differential Revision: D4486529
fbshipit-source-id: d90ef42
Summary:
This diff adds a set of access paths holding a value returned from a method annotated with Functional to the domain.
If a "functional" value is written to a field, we won't count that right as an unprotected access.
The idea is to be able to use the Functional annotation to get rid of benign race false positive, such as:
```
Functional T iAlwaysReturnTheSameThing();
T mCache;
T memoizedGetter() {
if (mCache == null) {
mCache = iAlwaysReturnTheSameThing();
}
return mCache;
}
```
Although there is a write-write race on `mCache`, we don't care because it will be assigned to the same value regardless of which writer wins.
Reviewed By: peterogithub
Differential Revision: D4476492
fbshipit-source-id: cfa5dfc
Summary:
We warn on unsafe accesses to fields that occur in a public method (or are reachable from a public method).
We ought not to consider VisibleForTesting methods as public, since they are only public for testing purposes.
Reviewed By: peterogithub
Differential Revision: D4477648
fbshipit-source-id: 5f58914
Summary: Simple model for List methods that write to the collection.
Reviewed By: peterogithub
Differential Revision: D4453381
fbshipit-source-id: 19edc51
Summary:
Previously, we would correctly be silent on code like `x = new T(); x.f = ...`, but would wrongly warn on code like `x = makeT(); x.f = ...`.
The reason is that we only allowed ownership through direct allocation.
This diff adds a boolean that specifies whether the return value is owned as part of the summary.
This allows us to correctly handle many common cases of (transitively) returning a freshly allocated object, but still won't work for understanding that ownership is maintained in examples like
`x = new T(); y = id(x); y.f = ...`.
Reviewed By: jvillard
Differential Revision: D4456864
fbshipit-source-id: b5eec02
Summary:
Eradicate currently considers a field initialized if it's simply accessed (not written to),
or initialized with another initialized field.
This fixes the issue.
Reviewed By: jvillard
Differential Revision: D4449541
fbshipit-source-id: 06265a8
Summary:
If we have code like
```
o.setF(source())
sink(o)
```
and `setF` is an unknown method, we probably want to report.
Reviewed By: jeremydubreil, mburman
Differential Revision: D4438896
fbshipit-source-id: 5edd204
Summary:
In code like
```
foo(o) {
iWriteToF(o)
}
```
, the condtional write to `f` in `iWriteToF` should become a conditional write for `foo`.
Reviewed By: peterogithub
Differential Revision: D4429160
fbshipit-source-id: f111ac4
Summary:
In code like
```
foo() {
Object local = new Object();
iWriteToAField(local);
}
```
, we don't want to warn because the object pointed to by `local` is owned by the caller, then ownership is transferred to the callee.
This diff supports this by introducing a notion of "conditional" and "unconditional" writes.
Conditional writes are writes that are rooted in a formal of the current procedure, and they are safe only if the actual bound to that formal is owned at the call site (as in the `foo` example above).
Unconditional writes are rooted in a local, and they are only safe if a lock is held in the caller.
Reviewed By: peterogithub
Differential Revision: D4429131
fbshipit-source-id: 2c6112b
Summary:
Races on volatile fields are less concerning than races on non-volatile fields because at least the read/write won't result in garbage.
For now, let's de-prioritize these writes by ignoring them.
Reviewed By: peterogithub
Differential Revision: D4434023
fbshipit-source-id: 05043ba
Summary:
Also make sure we don't introduce deprecated options in our repo, eg when
calling infer from infer.
Reviewed By: jeremydubreil
Differential Revision: D4430379
fbshipit-source-id: 77ea7fd
Summary: Just cleanup; gives us slightly less test code to maintain.
Reviewed By: jeremydubreil
Differential Revision: D4429265
fbshipit-source-id: d43c308
Summary:
Similar to marking classes ThreadConfined, we want to support marking fields as well.
The intended semantics are: don't warn on writes to the marked field outside of syncrhonization, but continue to warn on accesses to subfields.
Reviewed By: peterogithub
Differential Revision: D4406890
fbshipit-source-id: af8a114
Summary:
Adding models that allow us to warn on unguarded accesses to subclasses of `Map`, but not on accesses of threadsafe containers like `ConcurrentMap`.
Lots more containers to model later, but stopping at `Map`s for now to make sure the approach looks ok.
Reviewed By: jvillard
Differential Revision: D4385306
fbshipit-source-id: d791eee
Summary: Need to upgrade in order to specify some taint properties on a more recent `WebView` API.
Reviewed By: cristianoc
Differential Revision: D4382590
fbshipit-source-id: 0925742
Summary: These methods should only be called from other methods that also run on the UI thread, and they should not be starting new threads.
Reviewed By: peterogithub
Differential Revision: D4383133
fbshipit-source-id: 6cb2e40
Summary: Use the lazy dynamic dispatch by default in prod for the Java analysis
Reviewed By: sblackshear
Differential Revision: D4356872
fbshipit-source-id: 491e92e
Summary:
Without this it's not always obvious which test fails. It also makes it easier
to mass-patch test failures from the CI jobs to replace expected outputs with
actual outputs (eg, when debugging osx frontend tests from linux).
Reviewed By: jberdine
Differential Revision: D4352205
fbshipit-source-id: 8887d7b
Summary:
We currently can only model the return values of functions as sources.
In order to model inputs of endpoints as sources, we need the capability to treat the formals of certain functions as sources too.
This diff adds that capability by adding a function for getting the tainted sources to the source module, then using that info in the analysis.
Reviewed By: jeremydubreil
Differential Revision: D4314738
fbshipit-source-id: dd7d423
Summary:
Previously, summaries worked by flattening the access tree representing the post of the procedure into (in essence) a list of functions from caller input traces to callee output traces.
This is inefficient in many ways, and is also much more complex than just using the original access tree as the summary.
One big inefficiency of the old way is this: calling `Trace.append` is slow, and we want to do it as few times as possible.
Under the old summary system, we would do it at most once for each "function" in the summary list.
Now, we'll do it at most once for each node in the access tree summary.
This will be a smaller number of calls, since each node can summarize many input/output relationships.
Reviewed By: jeremydubreil
Differential Revision: D4271579
fbshipit-source-id: 34e407a
Summary: Don't warn on NotThreadSafe class, particularly when super is ThreadSafe
Reviewed By: sblackshear
Differential Revision: D4334417
fbshipit-source-id: 0df3b9d
Summary:
SuppressWarnings annotations are hardly used and add considerable
complexity due to requiring recompilation with an annotation processor.
Reviewed By: jvillard
Differential Revision: D4312193
fbshipit-source-id: c4fc07e
Summary:
If these collections don't encapsulate their state properly, there are bigger problems than thread safety issues :).
Plus, these warnings are less-than-actionable for non-Guava maintainers.
Reviewed By: peterogithub
Differential Revision: D4324277
fbshipit-source-id: cacfbf0
Summary:
Maintain an "ownership" set of access paths that hold locally allocated memory that has not escaped.
This memory is owned by the current procedure, so modifying it outside of synchronization is safe.
If an owned access path does escape to another procedure, we remove it from the ownership set.
Reviewed By: peterogithub
Differential Revision: D4320034
fbshipit-source-id: 64f9169
Summary: Rename the intermediate .exp.test files to .exp.test.noreplace so that they don't match the regexp used by `make test-replace`. Otherwise they can accidentally become .exp files that will show up in `git status`.
Reviewed By: cristianoc
Differential Revision: D4319436
fbshipit-source-id: df2ef21
Summary:
Before the diff, the code was considering as Nullable any annotation ending with `...Nullable`, including `SuppressParameterNotNullable`.
Closes#533
Reviewed By: jberdine
Differential Revision: D4317356
fbshipit-source-id: 6091c0f
Summary: Adding Buck `DEFS` macros for generating Infer genrules. The generated genrules can be used to run the analysis on any existing `java_library` targets.
Reviewed By: sblackshear
Differential Revision: D4291234
fbshipit-source-id: 6430e2e
Summary:
The Java frontend translates exceptions by assigning them to the return value.
This leads to weird behavior when the return type of the function is void.
Already handled one case of this in Quandary (ignoring assignments of exceptions to return value), but was missing the case where null is assigned to the return value.
The frontend does this to "clear" the value of previously assigned exceptions.
Reviewed By: jeremydubreil
Differential Revision: D4294060
fbshipit-source-id: 6bef5ef
Summary:
Although the Builder pattern is not actually thread-safe, Builder's are not expected to be shared between threads.
Handle this by ignoring all unprotected accesses in classes the end with "Builder".
We might be able to soften this heuristic in the future by ensuring rather than assuming that Builder are not shared between methods (or, ideally, between threads).
Reviewed By: peterogithub
Differential Revision: D4280761
fbshipit-source-id: a4e6738
Summary: This should no work even when Infer is not setup in the PATH
Reviewed By: jvillard
Differential Revision: D4262356
fbshipit-source-id: e3fa779
Summary: `ReentrantReadWriteLock.ReadLock` and `ReentrantReadWriteLock.WriteLock` are commonly used lock types that were not previously modeled.
Reviewed By: peterogithub
Differential Revision: D4262032
fbshipit-source-id: 4ff81a7
Summary:
`o.<init>` cannot be called in parallel with other methods of `o` from outside, so it's less likely to have thread safety violations in `o.<init>`.
This diff suppresses reporting of thread safety violations for fields touched (transitively) by a constructor.
We can do better than this in the future (t14842325).
Reviewed By: peterogithub
Differential Revision: D4259719
fbshipit-source-id: 20db71f
Summary: Originially, there was a missing package declaration meaning that the generated class was ending in a different place. I also added a test for equality of Integer to complement the test of no equality, which could be always true.
Reviewed By: sblackshear
Differential Revision: D4263676
fbshipit-source-id: 86ab0d3
Summary:
We only ought to report a source-sink flow at the call site where the sink is introduced.
Otherwise, we will report silly false positives.
Reviewed By: jeremydubreil
Differential Revision: D4234766
fbshipit-source-id: 118051f
Summary: This should make it easier to understand complex error reports.
Reviewed By: peterogithub
Differential Revision: D4254341
fbshipit-source-id: fb32d73
Summary: We'll eventually want fancy interprocedural traces. This diff adds the required boilerplate for this and adds the line number of each access to the error message. Real traces will come in a follow-up
Reviewed By: peterogithub
Differential Revision: D4251985
fbshipit-source-id: c9d9823
Summary: Adding this so we can test interprocedural trace-based reporting in a subsequent diff.
Reviewed By: peterogithub
Differential Revision: D4243046
fbshipit-source-id: 7d07f20
Summary: We're at risk for some silly false positives without these models.
Reviewed By: peterogithub
Differential Revision: D4244795
fbshipit-source-id: b0367e6
Summary: Add some basic command line API to run Infer using Buck genrules. Remains to fix issues with absolute vs relative paths and to see how to create these genrules on the fly for a given java or android library.
Reviewed By: sblackshear
Differential Revision: D4245622
fbshipit-source-id: 1cda4ee
Summary:
Dealing with symbolic links in project root is tricky. To avoid it, always normalize all paths to sources with `realpath`.
Changes to tests are expected - infer started to resolve symbolic links which screws up with our testing mechanism.
Reviewed By: jberdine
Differential Revision: D4237587
fbshipit-source-id: fe1cb01
Summary:
Before, we were using a set domain of strings to model a boolean domain.
An explicit boolean domain makes it a bit clear what's going on.
There are two things to note here:
(1) This actually changed the semantics from the old set domain. The set domain wouldn't warn if the lock is held on only one side of a branch, which isn't what we want.
(2) We can't actually test this because the modeling for `Lock.lock()` etc doesn't work :(.
The reason is that the models (which do things like adding attributes for `Lock.lock`) are analyzed for Infer, but not for the checkers.
We'll have to add separate models for thread safety.
Reviewed By: peterogithub
Differential Revision: D4242487
fbshipit-source-id: 9fc599d
Summary:
In Java, we handle unknown code by propagating behavior from the parameters of the unknown function call to the return value (or constructed object, in the case of a constructor). But we do this in a somewhat silly way--generating a new summary with these semantics at each unknown call site. Instead, this diff introduces these two options as predefined behaviors and adds specialized code for them.
As a side effect of this approach, unknown functions are no longer counted as passthroughs. This is ok; the original behavior was less of a reasoned decision and more of an unintended consequence of the way we decided to handle unknown code.
This new approach ought to be more efficient than the old one, and as a virtuous side effect it will be easier to specify how to handle unknown code in other languages like C++.
Reviewed By: jeremydubreil
Differential Revision: D4205624
fbshipit-source-id: bf97445
Summary: Run all java tests with project-root at `infer/tests`. Do it to keep things consistent between clang and java tests
Reviewed By: sblackshear
Differential Revision: D4233236
fbshipit-source-id: c3f24fd
Summary:
Let's introduce some concepts. A "known unknown" function is one for which no Java code exists (e.g., `native`, `abstract`, and `interface methods`). An "unknown unknown" function is one for which Java code may or may not exist, but we don't have the code or we choose not to analyze it (e.g., non-modeled methods from the core Java or Android libraries).
Previously, Quandary handled both known unknowns and unknown unknowns by propagating taint from the parameters of the unknown function to its return value. It turns out that it is really expensive to do this for known unknown functions. D4142697 was the diff that starting handling known unknown functions in this way, and bisecting shows that it was the start of the recent performance problems for Quandary.
This diff essentially reverts D4142697 by handling known unknowns as skips instead. Pragmatically, doing the propagation trick for Java/Android library functions (e.g., `String` functions!) matters much more, so i'm not too worried about the missed behaviors from this. Ideally, we will go back to the old handling once performance has improved (have lots of ideas there). But I need this to unblock me in the meantime.
Reviewed By: jeremydubreil
Differential Revision: D4205507
fbshipit-source-id: 79cb9c8
Summary:
Developers will sometimes write GuardedBy("T.f") with the intended semantics: "guarded by the field f of the object with type T in the current state".
We want to support this to avoid false positives.
Reviewed By: peterogithub
Differential Revision: D4197476
fbshipit-source-id: acd00d9
Summary:
The way interfaces are dealt with led to a false positive,
where tryLock() works OK for a Lock but not for a ReentrantLock.
The solution is just to provide the model.
While I am at it I am adding some more standard tests for Lock and ReentrantLock, which were not present.
Reviewed By: sblackshear
Differential Revision: D4204551
fbshipit-source-id: 9b6de28
Summary:
Record an abstraction of the bug traces in the tests. The abstraction of a
trace is the sequence of descriptions. In practice, descriptions are either
empty, or of the form "start/end/return from/call to procedure X". They seem
pretty stable.
Motivation: there is nothing testing the traces reported by Infer right now,
even though they are surfaced to developers. For instance, Quandary uses
--issues-txt instead of --issues-tests to make sure the traces do not regress.
This change would make this approach more widespread.
Reviewed By: sblackshear
Differential Revision: D4159597
fbshipit-source-id: 9c83952
Summary:
When loading results from a json file, sort them. This prints results in some
sane order for both --issues-test and --issues-txt, removing the need for
post-processing of the result.
Reviewed By: cristianoc
Differential Revision: D4167029
fbshipit-source-id: 37e9f1c
Summary:
- rename java.make -> javac.make, config.make -> java.make, and move to infer/tests/ so it's easier to use from infer/tests/build_systems/
- use these from ant's test Makefile, much code reuse!
- factor out common functionality between java and clang
A wrinkle: sorting is now done the same way for --issues-tests and
--issues-txt, which produces bogus (but still as deterministic) sorting for
--issues-txt. This is more of a cosmetic issue, but I hope to fix it in a later
diff that gets rid of calls to `sort` in favour of sorting directly from
`InferPrint`.
Reviewed By: jberdine
Differential Revision: D4166841
fbshipit-source-id: ed6f232
Summary: The thread safety checker is run independently of other analyses, using the command "infer -a threadsafety -- <build-command>".
Reviewed By: sblackshear
Differential Revision: D4148553
fbshipit-source-id: bc7b3f9
Summary:
Our patch to Javalib has been accepted, so we can parse programs with invokedynamic!
invokedynamic still crashes Sawja, but I have worked around this by replacing all invokedynamic's with invokestatic's before passing them to Sawja.
This means we can handle everything about invokedynamic except calling the correct function (I call a dummy function with the correct signature for now).
We can try to actually call the right method in the future.
Reviewed By: jvillard
Differential Revision: D4160384
fbshipit-source-id: a8ef4e1
Summary: When searching for cast errors, types that were not Java objects, e.g. arrays of primitive types were not taken into account, leading to incorrect class cast excpetion reports.
Reviewed By: sblackshear
Differential Revision: D4166184
fbshipit-source-id: 7157c95
Summary: If a procedure is both a source and a sink for the same value, and it's a sink first, you will get a false positive when applying the summary for the procedure.
Reviewed By: cristianoc
Differential Revision: D4145246
fbshipit-source-id: 97f0022
Summary: `make test` was always exiting with exit code 0, even in the case of test failures. This is definitely not what we want.
Reviewed By: sblackshear
Differential Revision: D4154912
fbshipit-source-id: 87b4b2b
Summary: Mark native methods as defined so that the analysis generates a summary for those methods. When analyzing Java projects compiled with Buck, the summaries for the dependencies methods of are retrieved from the classpath. In this case, having access to the summary is useful to access the attributes of a callee when the callee is part of a, previously analyzed, Buck target.
Reviewed By: sblackshear
Differential Revision: D4141362
fbshipit-source-id: 75888c8
Summary:
Analyses should handle methods whose code is unknown and methods whose summary is a no-op differently.
Previously, this was done correctly for some kinds of methods (e.g., native methods, which were recognized as unknown), but not for others (interface and abstract methods).
This diff makes sure we correctly treat all three kinds as unknown.
Reviewed By: jeremydubreil
Differential Revision: D4142697
fbshipit-source-id: c88cff3
Summary:
Instead of the custom filtering done by `InferPrint --issues-tests`, use the
filtering done by `infer` and run without filtering for our e2e tests. We still
test the filtering for our build systems integration tests, and this diff
restores that behaviour for the ant test (hence the bugs removed from
ant/issues.exp).
Also add internal exceptions to most tests to get more signal out of them (eg,
knowing when we add assertion failures and the like).
Retire the old `--issues-tests` to limit the number of ways we do filtering.
Reviewed By: jeremydubreil
Differential Revision: D4131308
fbshipit-source-id: 35805cc
Summary:
Our default strategy for handling unknown code is to propagate taint from the actuals to the return value.
But for commonly-used methods like `StringBuilder.append` (used every time you do `+` with a string in Java), this doesn't work.
The taint should be propagated to both the receiver and the return value in these cases.
I'm considering a solution where we always propagate taint to the receiver of unknown functions in the future, but I am concerned about the performance.
So let's stick with a few special string cases for now.
Reviewed By: cristianoc
Differential Revision: D4124355
fbshipit-source-id: 5b2a232
Summary: A must-have for reporting taint errors and any other interprocedural error where the trace is sufficiently complex.
Reviewed By: jvillard
Differential Revision: D4124072
fbshipit-source-id: 26b3b2b
Summary: A must-have for reporting taint errors and any other interprocedural error where the trace is sufficiently complex.
Reviewed By: jvillard
Differential Revision: D4106352
fbshipit-source-id: b2677e6
Summary: We want to skip readwrite locks for now, maybe report on their misuses later.
Reviewed By: sblackshear
Differential Revision: D4110998
fbshipit-source-id: 986f77e
Summary:
Previously, we recorded direct sinks as sinks and transitive sinks as passthroughs. This makes it difficult to create an expanded interprocedural trace when recording an error because we can't distinguish between sinks (which we want to expand) and passthroughs (which we don't). This diff changes recording of sinks so that a sink is now the *last* function in a trace to call a sink. To find out what the original sink was, the summary for the transitive sink in the trace will now need to be (recursively) expanded until we bottom out in the original sink.
Will do the same for sources in a follow-up diff.
Reviewed By: cristianoc
Differential Revision: D4103759
fbshipit-source-id: 6f435f5
Summary:
Needed to support upcoming diff(s) that change the nature of sources/sinks in a trace. Today they are the *original* source/sink, but in the future they will be the *transitive* source/sink (last procedure to return a source/call a sink).
This new convention will make the `returnAllSources`/`callAllSinks` form of these tests not so useful, since `returnAllSources`/`callAllSinks` will now show up as a single source/sink in the trace (at least without expanding the trace). By making these tests intraprocedural, we can make sure that we're still testing everything that we want to.
Reviewed By: cristianoc
Differential Revision: D4103754
fbshipit-source-id: 1733ecf
Summary:
See code comment about `throw exn` being translated as `return exn`.
This problem was revealed by D4081279, which started grabbing access paths from exceptions.
Reviewed By: jvillard
Differential Revision: D4096391
fbshipit-source-id: 9d91513
Summary: Doing `sychronized(A.class)` where `A` is an inner class was not previously recognized by the `GuardedBy` checker.
Reviewed By: peterogithub
Differential Revision: D4095094
fbshipit-source-id: c832f9e
Summary:
We issue a thread safety warning on a class not
marked ThreadSafe, when it has a super that is. This makes some sense. But,
it will be nice to remind that a super is so maeked, else the mesg could
seem out of context or surprising
Reviewed By: sblackshear
Differential Revision: D4075145
fbshipit-source-id: ebc2b83
Summary:
This diff revises the makefiles for java tests so that they are based on
the files actually produced and depended on, instead of the existing
imperative style. This is, I think, clearer and easier to modify, and
enables a little more parallelism.
Reviewed By: jvillard
Differential Revision: D4072560
fbshipit-source-id: c16d4bd
Summary:
Right now, taint gets lost if it flows into a constructor or procedure whose implementation is missing.
Since the core Java (e.g., String) and Android classes (e.g, Intent) are among these, this is bad.
We could handle this by writing a bunch of models instead, but that would be a lot of work (plus we may still miss cases).
Reviewed By: jvillard
Differential Revision: D4051591
fbshipit-source-id: 65851c8
Summary:
Before, if I wrote code like
```
x = src()
sink(x)
sink(x)
```
we would report three times instead of two.
The first flow would be double-reported.
Reviewed By: jeremydubreil
Differential Revision: D4024678
fbshipit-source-id: fcd5b30
Summary: when a method has writes to a field outside of synchrnoization, issue an appropriate error message identifying the fields
Reviewed By: sblackshear
Differential Revision: D4015612
fbshipit-source-id: 4f697fc
Summary:
This changes the algorithm for pure join to keep the constraints that,
after normalization, occur in both arguments. Previously pure join
would normalize, filter, and then union the constraints of the
arguments.
Reviewed By: sblackshear
Differential Revision: D3970394
fbshipit-source-id: 3dc1672
Summary:
Add a test case for a problem peterogithub uncovered with join of
attributes. The expected result is currently incorrect, to be fixed
later.
Reviewed By: sblackshear
Differential Revision: D3970363
fbshipit-source-id: 077705d
Summary:
We were previously leaking the passthroughs of the callee into the caller.
We definitely don't want to do this since it could make the summaries higher up in the call stack explode.
If we need to know the passthroughs of a callee, we can always read them from the callee's summary.
Reviewed By: jeremydubreil
Differential Revision: D3972679
fbshipit-source-id: 5b5903f
Summary: The Infer builtins can be used in the e2e tests, but those tests should not depend on the Infer models to avoid cyclic dependencies. This diff separates the models and the Infer builtins in two directories so that the test can depend on the builtins without depending on the models
Reviewed By: sblackshear
Differential Revision: D3929478
fbshipit-source-id: 7d0ab79
Summary:
Convert the last remaining tests to the new direct format: java harness and crashcontext.
Remove what is left of the old testing infrastructure.
Reviewed By: sblackshear
Differential Revision: D3886355
fbshipit-source-id: 5117868
Summary:
For tests that have reports of the form `<file>:<line>*`, sort first by
file, then by line numerically.
Reviewed By: sblackshear
Differential Revision: D3828044
fbshipit-source-id: d10cffe
Summary:
This diff converts the Eradicate and Checkers tests to the new direct test format, which does not rely on buck or junit.
A self-contained Makefile is used to compile and analyze the test files, including all the dependencies, and a special option in InferPrint is used to produce a file of expected results `issues.exp`, which is checked into the repository.
Having an explicit Makefile makes it easy to edit and compile one set of test files in isolation, to investigate test failures, do debugging, etc.
A bunch of boilerplate code is removed. For example, the single file of expected results `issues.exp` replaces the 1.5K LOC in `endtoend/java/eradicate`.
Reviewed By: jvillard
Differential Revision: D3764632
fbshipit-source-id: 6c68ab8
Ezgi Çiçek
Jules Villard
Martino Luca
Nikos Gorogiannis
Mehdi Bouaziz
Jeremy Dubreil
Dino Distefano
Sam Blackshear
Tony Hu
Radu Grigore
Daiva Naudziuniene
Peter O'Hearn
Anders Papitto
Josh Berdine
azhdar
Jia Chen
Paco Estevez Garcia
Cristiano Calcagno
Andrzej Kotulski
Dulma Churchill