Summary:
A space in user's path will lead to a make failure on line 899 of
Makefile. Let's espace the path to avoid that.
Reviewed By: jvillard
Differential Revision: D22044934
fbshipit-source-id: 5a949be1d
Summary:
This diff adds a prototype of a new checker that collects config checkings between markers.
Basically, what the checker is doing is a taint analysis.
* Taint source: function calls of "marker start"
* Taint sink: function calls of config checking
* Taint remove: function calls of "marker end"
By the taint analysis, the analysis results will say that which taints can reach to the sink. In other words, which marker ID that has been started can reach to the config checks, before marker's ending.
I am separating the diff into three steps:
(1/3) Add basic abstract semantics
(2/3) Add trace information
(3/3) Add reporting with test examples
Reviewed By: jvillard
Differential Revision: D21998170
fbshipit-source-id: e7759f62f
Summary:
Turns out it was useful, so it is now reborn in OCaml.
Fixes https://github.com/facebook/infer/issues/1262.
Reviewed By: skcho
Differential Revision: D22016185
fbshipit-source-id: 31ccb7540
Summary:
Hopefully solve issues with people having versions of sqlite that make
infer crash.
Fix#1081.
Reviewed By: skcho
Differential Revision: D21998757
fbshipit-source-id: 4baabc1c3
Summary:
This is mostly a partial revert of D19022905 and D19272627 for only the
part of it concerned with "install-with-libs".
Fixes#1260.
Reviewed By: skcho
Differential Revision: D21998484
fbshipit-source-id: ed884e772
Summary:
Write documentation for all documented issue types and all user-facing
checkers in the "next" version of the documentation. Next diff shows the
new website.
Reviewed By: dulmarod
Differential Revision: D21934370
fbshipit-source-id: 53315d2b4
Summary: We were missing `performance-exclusive` and `fb-performance` tests in the list of cost analysis targets.
Reviewed By: jvillard
Differential Revision: D21837972
fbshipit-source-id: 550d27918
Summary:
infer/src/deadcode/dune.in is not an OCaml-syntax dune file, so
exclude it from the list computed for use by the auto-formatter.
Reviewed By: jvillard
Differential Revision: D21583047
fbshipit-source-id: 13a99a89b
Summary:
Start with tests about dynamic dispatch to test the upcoming
pre-analysis.
Reviewed By: ezgicicek
Differential Revision: D21594496
fbshipit-source-id: 1771ea968
Summary:
Fix `make doc-publish` and make it publish the documentation to
website/static/{man,doc}/next/.
Reviewed By: ngorogiannis
Differential Revision: D21552291
fbshipit-source-id: fb6d07cfc
Summary:
The directory was created to have several sets of nullsafe tests but
there is only one in the end. Remove the redundant "-default".
Reviewed By: mityal
Differential Revision: D21300205
fbshipit-source-id: 46ed8b032
Summary:
The directory names had some interesting variety due to historical
reasons.
- {c,cpp,objc,objcpp}/errors/ date from the time when infer was only
biabduction
- java/infer/ dates from the time when we had an "--analyzer" option and
"infer" was one of them (sic), and eg another was "eradicate".
- c/biabduction/ dates from the time when the biabduction analysis was
being migrated to the "checkers" (AI) framework. For some reasons the
tests there are not a subset of c/infer/ but seem to be entirely new
tests.
The convention now dictates that we should name all of these
*/biabduction/. This diff moves the existing tests from c/biabduction/
into c/biabduction/misc/.
Reviewed By: mityal
Differential Revision: D21300147
fbshipit-source-id: 516d1cb15
Summary:
All dune libraries in infer/src/ were declared with their own public
names, each one needing its own .opam file. There's no need for that:
they can all be part of the `infer` library by calling them `infer.Foo`.
One wrinkle: now we need to explicitly point at their .mld files in the
generated documentation.
Reviewed By: jberdine
Differential Revision: D20798914
fbshipit-source-id: 64b64261c
Summary:
infer/lib/python/'s not pinin'! It's passed on! This library is no more!
It has ceased to be! It's expired and gone to meet its maker! It's a
stiff! Bereft of life, it rests in peace! If you hadn't nailed it to the
perch it'd be pushing up the daisies! 'ts metabolic processes are now
'istory! It's off the twig! It's kicked the bucket, it's shuffled off
its mortal coil, run down the curtain and joined the bleedin' choir
invisible!! THIS IS AN EX-PYTHON!!
Reviewed By: ngorogiannis
Differential Revision: D20672771
fbshipit-source-id: 7808c0ece
Summary:
Hopefully no one uses this. This is in Python and we'd like to get rid
of it. Easy enough to either re-implement if needed or to be
re-implemented by a third party.
Reviewed By: ngorogiannis
Differential Revision: D20626344
fbshipit-source-id: 484022482
Summary: Add a flag `is-inclusive-cost` (`true` by default) which computes inclusive cost for each function. Setting the flag to `false` computes exclusive cost of the function where the cost of the callees are assumed to be `0`.
Reviewed By: skcho
Differential Revision: D20558275
fbshipit-source-id: 6b5798916
Summary:
Manuals were previously built as part of `make test`, but `test` takes
too long so `make manuals` is a convenient replacement.
Reviewed By: ngorogiannis
Differential Revision: D20517145
fbshipit-source-id: 404c9921f
Summary:
Next step in moving logic from make to dune. Since dune understands
build rules with multiple targets we don't need to introduce
artificial pipelining as in make. Rules are pretty straightforward,
albeit somewhat verbose.
The tricky part here was adjusting deadcode detection.
Reviewed By: jvillard
Differential Revision: D20322605
fbshipit-source-id: 688e5f96f
Summary:
Main changes are:
1. Dune can promote targets into the source tree as a part of build. This
allows us to **remove custom promotion/installation logic in src/Makefile**.
2. Dune promotion only works for path within workspace. This required
**moving dune-workspace one folder up**: from infer/infer/src to infer/infer.
But this is not bad, since it makes it possible to migrate tests under dune at some point.
3. `checkCopyright` now also promoted into `infer/infer/bin` instead of
`infer/scripts` partly for consistency and partly because of the
dune-workspace location.
4. `byte` mode was replaced with `byte_complete`. The latter takes
similar amount of time to build compared to `byte`, but produces
standalone binaries that don't require InferCStubs to be
installed. This allowed to remove `dune_exec_shim` and custom logic
around `dune build InferCStubs.install` when dealing with byte
targets.
All in all, `infer/src/Makefile` is not about 2/3 its previous size
with less custom logic in Makefiles/scripts and more encoded in dune
build files.
Reviewed By: jvillard
Differential Revision: D20303902
fbshipit-source-id: 9e4c65bd0
Summary:
With the introduction of environments and profiles we no longer need
to generate most dune files in libraries via make. Also, those dune
builds don't need to be in OCaml.
In addition to converting build files to plain sexp definitions, this
patch also:
- Adjusts copyrightCheck to work correctly with sexp-based dune files.
- Adds auto-formatting for sexp-based dune files.
Reviewed By: jvillard
Differential Revision: D20250208
fbshipit-source-id: 495aeaa99
Summary:
With profiles and `(env ...)` stanza it's possible to consolidate
various ocamlc/ocamlopt/etc setups in a single place.
Where previously we needed to append `dune.common` to every dune file
and specify `flags` and `ocamlopt_flags` now the flags are specified
in `env` and applied accross the board.
This allows to
1. simplify build definitions,
2. avoid the need to generate dune files,
3. use plain sexps instead of OCaml and JBuilder plugin in build
files.
(I'll try to address 2 and 3 in the followup patches).
Existing `make` targets should continue working as before. Also, we
can use dune CLI like so:
```
infer/src$ dune printenv --profile opt # <- very useful for introspection
infer/src$ dune build check
infer/src$ dune build check --profile test
infer/src$ dune build infer.exe --profile dev
infer/src$ dune build infer.exe --profile opt
```
Also, with just 1 context something like `dune runtest` will run unit
tests only once instead of N times, where N is the number of contexts.
Now, there's one difference compared to the previous setup with
contexts:
- Previously, each context had its own build folder, and building infer
in opt context didn't invalidate any of the build artifacts in default
context. Therefore, alternating between `make` and `make opt` had low
overhead at the expense of having N copies of all build artifacts (1
for every context).
- Now, there's just 1 build folder and switching between profiles does
invalidate some artifacts (but not all) and rebuild takes a bit more
time.
So, if you're alternating like crazy between profiles your experience
may get worse (but not necessarily, more on that below). If you want
to trigger an opt build occasionally, you shouldn't notice much
difference.
For those who are concerned about slower build times when alternating
between different build profiles, there's a solution: [dune
cache](https://dune.readthedocs.io/en/stable/caching.html).
You can enable it by creating a file `~/.config/dune/config` with the
following contents:
```
(lang dune 2.0)
(cache enabled)
```
With cache enabled switching between different build profiles (but
also branches and commits) has ~0 overhead.
Dune cache works fine on Linux, but unfortunately there are [certain
problems with
MacOS](https://github.com/ocaml/dune/issues/3233) (hopefully, those
will be fixed soon and then there will be no downsides to using
profiles compared to contexts for our case).
Reviewed By: jvillard
Differential Revision: D20247864
fbshipit-source-id: 5f8afa0db
Summary:
This was never quite finished and inferbo has a new way to do sort of
the same thing.
Reviewed By: skcho, ngorogiannis
Differential Revision: D20362619
fbshipit-source-id: 7c7935d47
Summary:
Adding a model for malloc: we add an attribute "Allocated". This can be used for implementing memory leaks: whenever the variables get out of scope, we can check that if the variable has an attribute Allocated, it also has an attribute Invalid CFree.
Possibly we will need more details in the Allocated attribute, to know if it's malloc, or other allocation function, but we can add that later when we know how it should look like.
Reviewed By: jvillard
Differential Revision: D20364541
fbshipit-source-id: 5e667a8c3
Summary:
These were not used (and were actually activated byt the same config
param). They both are in experimental stage that never reached maturity.
Since the team does not have immediate plans to work on ObjC nullability
checker; and since "eradicate" (now known as nullsafe) is the main
solution for Java, removing it is sensible.
Reviewed By: jvillard
Differential Revision: D20279866
fbshipit-source-id: 79e64992b
Summary: Sometimes, we want to run/clean/replace tests for **only cost analysis**. Let's introduce a set of commands for this purpose.
Reviewed By: skcho
Differential Revision: D20141657
fbshipit-source-id: d0ad267b2
Summary:
More newer = more better.
This flips the Not_found -> Not_found_s switch, and forbids a bunch more
polymorphic comparisons (mostly turned into `int` comparisons for
convenience). Earlier diffs prepare for this so this diff is only about
breaking changes in the API, of which there are only a few.
Reviewed By: jberdine
Differential Revision: D19861583
fbshipit-source-id: fe54ce8f0
Summary:
This diff adds a taint domain in Inferbo. The taint value will be used to find vulnerable array
accesses in the following diffs.
Reviewed By: ezgicicek
Differential Revision: D19391028
fbshipit-source-id: 566b4c0fe
Summary:
Quoting the doc:
> `dune check` builds the minimal set of targets required for tooling
support. Essentially, this is .cmi, .cmt, .cmti, and .merlin files.
So, running `make check` can be a tad faster and more economical
way to typecheck the code as you develop (and make merlin understand
what's going on).
We already had `check` taget defined in `infer/src/Makefile` but it
was not exposed at the top level. Fixing it.
Reviewed By: jberdine
Differential Revision: D19619920
fbshipit-source-id: c143cecd8
Summary:
Kill these tests as that mode is not supported anymore.
Note that :
- "buck_cross_module" was effectively already dead since it's not hooked up to `make test`
- "buck" is actually another copy of "genrule" so wasn't testing anything
Reviewed By: ngorogiannis
Differential Revision: D19176166
fbshipit-source-id: b5bb90448
Summary:
Inferbo does not use the external relational domains, apron and elina. At some point, the parts of
inferbo using them were broken and they do not seem to be fixed easily in the near future. Let's
remove them and keep the code base cleaner.
Reviewed By: jvillard
Differential Revision: D19022905
fbshipit-source-id: e0eafe79f
Summary: The new domain is much better than the old one. Let's kill the old one (along with old litho tests) and simplify things.
Reviewed By: skcho
Differential Revision: D18959627
fbshipit-source-id: df77ae20e
Summary:
Let's add basic Java support to impurity checker. Since impurity checker relies on pulse, we need to add Java with Pulse callback as well. Pulse doesn't officially support Java yet, but we can enable it for impurity checker for now.
Many Java primitives/operations are not yet modeled (such as creation of new objects, support for collections etc.). Still, it is good to run impurity checker on the existing tests of the purity checker. Also, it is nice to see that we can identify most of the impure functions correctly in the purity dir. There are a lot of FNs though.
Reviewed By: skcho
Differential Revision: D17906237
fbshipit-source-id: 15308d285
Summary:
Introduce a new experimental checker (`--impurity`) that detects
impurity information, tracking which parameters and global variables
of a function are modified. The checker relies on Pulse to detect how
the state changes: it traverses the pre and post pairs starting from
the parameter/global variable and finds where the pre and post heaps
diverge. At diversion points, we expect to see WrittenTo/Invalid attributes
containing a trace of how the address was modified. We use these to
construct the trace of impurity.
This checker is a complement to the purity checker that exists mainly
for Java (and used for cost and loop-hoisting analyses). The aim of
this new experimental checker is to rely on Pulse's precise
memory treatment and come up with a more precise im(purity)
analysis. To distinguish the two checkers, we introduce a new issue
type `IMPURE_FUNCTION` that reports when a function is impure, rather
than when it is pure (as in the purity checker).
TODO:
- improve the analysis to rely on impurity information of external
library calls. Currently, all library calls are assumed to be nops,
hence pure.
- de-entangle Pulse reporting from analysis.
Reviewed By: skcho
Differential Revision: D17051567
fbshipit-source-id: 5e10afb4f
Artem Pianykh
Sungkeun Cho
Nikos Gorogiannis
Jules Villard
Ezgi Çiçek
Josh Berdine
Martin Trojer
Dulma Churchill
Mitya Lyubarskiy