Summary: We do not inject a destructor call if the destructor declaration does not contain a body in AST. We miss all the cases where the destructor is declared in `.h` file and defined in `.cpp` file as other files include `.h` file and do not contain the body of the destructor when destructor calls are being injected based on AST information. After this diff we inject destructor calls even if we do not have body for the destructor in AST.
Reviewed By: sblackshear
Differential Revision: D6796567
fbshipit-source-id: 1c187ec
Summary: More preparation for extending HIL with dereference and address of. We need left hand side of the assignment to also include dereference and address of.
Reviewed By: sblackshear
Differential Revision: D6976150
fbshipit-source-id: 47d1d76
Summary:
It prunes abstract memories on `assert` commands.
Problem: Since the assert command is sometimes translated to two
sequential `if` statments, it was not able to prune the memory
precisely at `assert` commands in Inferbo---the pruned memory at the
first branch was joined before the second branch.
Solution: To avoid losing the pruning information at the first branch,
now, it records which locations are pruned at the first branch and
applies the same pruning at the next branch if they have
semantically the same condition.
Reviewed By: mbouaziz
Differential Revision: D6895919
fbshipit-source-id: 15ac1cb
Summary:
See comment--`Prop(resType = blah) myProp` will generate `.myProp`, `.myPropRes`, and `.myPropAttr`, and any of them can be used to set the prop.
Because our annotation parameter parsing is a bit primitive, handle this by simply checking the `Res` and `Attr` suffixes for every `Prop`.
This shouldn't lead to false negatives because these methods will only exist if the `resType` annotation is specified anyway.
Reviewed By: jeremydubreil
Differential Revision: D6955362
fbshipit-source-id: ec59b21
Summary: InferPrint should not generate StatsLogs format at all unless Config.log_events is set to true
Reviewed By: mbouaziz, dulmarod
Differential Revision: D6976352
fbshipit-source-id: d12005a
Summary: In Obj-C blocks, we explicitly insert reads of the captured vars. This does the same thing for C++. For example, `foo() { int x = 1; [x]() { return x; } }` would previously not contain a read of `x` in `foo`. Now, we'll create a temporary that reads from `x` and pass it to the closure value.
Reviewed By: dulmarod
Differential Revision: D6939997
fbshipit-source-id: f218afc
Summary:
1) Fixes some false negatives when a method annotated with `nullable` in the header is not annotated in the implementation and the attribute lookup returns the implementation. In that case, we should follow the information given in the header.
2) Fixes some false positives when annotations are in the other way around, i.e. annotated in the implementation but not in the headers. For now, there should be no report in this case, but the analysis should be extended to report the inconsistency between the header and the implementation
3) Fixes some cases of weird reports caused by name conflicts where the method in the include has the same name has another method annotated differently.
Reviewed By: jvillard
Differential Revision: D6935379
fbshipit-source-id: 3577eb0
Summary: Preparing to extend HIL with Dereference and AddressOf expressions. Next steps: (1) change SIL -> HIL translation to preserve address of and dereference; (2) adapt analyses based on HIL to make use access expressions.
Reviewed By: jeremydubreil
Differential Revision: D6961928
fbshipit-source-id: 51da919
Summary:
Added a check for recursive calls not to add abduced reference parameters constraints. Abduced reference parameters constraints were causing assertion failure when renaming variables in specs, in particular, when transforming variables into callee variables.
A similar check is already in place for abduced retvals constraints.
Reviewed By: jeremydubreil
Differential Revision: D6856919
fbshipit-source-id: acfe840
Summary:
This allows Eradicate to lookup the annotations from the classpath and without requiring the code in the classpath to have been previously analyzed. The benefit is that source files can be analyzed independently of each other as long as the classpath is known.
The main goal is to run be able to run Eradicate as a linter without losing warnings.
We may have to add some more models of the standard libraries as no `Nullable` on a parameter does not necessarily mean that the method does not accept `null`.
Reviewed By: sblackshear
Differential Revision: D6921720
fbshipit-source-id: f525269
Summary: Some tags like `Bucket` are used, but a lot are just added to the list of tags and never read.
Reviewed By: mbouaziz
Differential Revision: D6886980
fbshipit-source-id: 4474d7f
Summary:
There's a lot of code for building up and moving around `Tags`.
When working on cleaning up some of the `Errlog` code, I noticed that `Tags` were included in the JSON and wondered why.
The answer is suprisingly just one thing: only the line tags get used, and even then they are only used to decide what frame to select as the start frame for the trace (i.e., the one that is highlighted first).
That seems like overkill; starting on trace on the actual line where the error occurs, starting at the beginning of the procedure where the error occurs, or starting at the first line of the trace all seem equally reasonable.
If we are happy with any of these alternatives, we can kill `Tags` altogether and potentially save a decent amount space in our JSON artifacts.
Reviewed By: mbouaziz
Differential Revision: D6876752
fbshipit-source-id: 1580127
Summary:
Useful to debug without having to rerun commands.
Looks like this:
```
Usage Error: Failed to execute compilation command:
'/home/jul/infer.fb/infer/bin/../../facebook-clang-plugins/clang/install/bin/clang'
'args.txt'
++Contents of 'args.txt':
'arg1.txt' 'arghorashy_hello_c.txt' 'args.txt'
++Contents of 'arg1.txt':
'arghorashy_c.txt'
++Contents of 'arg_c.txt':
'-c'
++Contents of 'arg_hello_c.txt':
'examples/hello.c'
Error message:
clang-5.0: error: no such file or directory: 'examples/hello.c'
*** Infer needs a working compilation command to run.
```
Reviewed By: mbouaziz
Differential Revision: D6872550
fbshipit-source-id: 65cd026
Summary:
- Combine two fields from ProcAttributes.t into a single field `method_kind` with more information
- New field details whether the procedure is an `OBJC_INSTANCE`, `CPP_INSTANCE`, `OBJ_CLASS`, `CPP_CLASS`, `BLOCK`, or `C_FUNCTION`
- `is_objc_instance_method` and `is_cpp_instance_method` fields no longer necessary
- Changed `is_instance` field in CMethod_signature to `method_kind` field of type ProcAttributes.method_kind
Reviewed By: dulmarod
Differential Revision: D6884402
fbshipit-source-id: 4b916c3
Summary: If the procedure is defined, then the attributes should be the same on the specs files or on the attributes table.
Reviewed By: sblackshear
Differential Revision: D6910086
fbshipit-source-id: 709b290
Summary:
- small optimization by starting deconstructing procnames/types in the dispatcher rather than the matchers
- as a consequence, returns fast for unhandled constructs like Java procnames or types
- Java is still not handled but at least does not crash
- re-enable Inferbo for Java
Reviewed By: jberdine
Differential Revision: D6912304
fbshipit-source-id: 76e95a8
Summary:
In some cases infer runs clang commands where we do not attach the plugin,
notably for pre-processor-only commands like `clang -E foo.c`. Usually these
commands are used by build systems to test their output, so infer should not
swallow it.
This makes infer echo the stdout of clang whenever we do not attach the plugin
to clang. When the plugin is attached, stdout is captured because that's where
the plugin outputs its results, so we cannot do the same in this case (not that
we would want to yet).
Fixes#696.
Reviewed By: mbouaziz
Differential Revision: D6912101
fbshipit-source-id: c4ad2e4
Summary:
Record "capture phases" in the runstate and in the source files table of the
database. Use this instead of filesystem timestamps to decide which files need
re-analyzing in the reactive analysis.
Reviewed By: jeremydubreil
Differential Revision: D6760833
fbshipit-source-id: 7955621
Summary:
The boolean lock domain is simple and surprisingly effective.
But it's starting to cause false positives in the case where locks are nested.
Releasing the inner lock also releases the outer lock.
This diff introduces a new locks domain: a map of locks (access paths) to a bounded count representing an underapproximation of the number of times the lock has been acquired.
For now, we just use a single dummy access path to represent all locks (and thus a count actually would have been sufficiently expressive; we don't need the map yet).
But I'm planning to remove this limitation in a follow-up by refactoring the lock models to give us an access path.
Knowing the names of locks could be useful for error messages and suggesting fixes.
Reviewed By: jberdine
Differential Revision: D6182006
fbshipit-source-id: 6624971
Summary: There's a new `ocaml_pos` type that the other clang frontend exceptions use, but Self.SelfClassException still used the raw tuple. Now, SelfClassException also uses this type.
Reviewed By: dulmarod
Differential Revision: D6900258
fbshipit-source-id: 94c7042
Summary:
- During backend execution, infer will log detailed stats about procedure analysis
- Logging is integrated with EventLogger
- `events_to_log` field added to Stats.t record in InferPrint
- New format in InferPrint - Logs
- `format_list` type changed to have a Utils.Outfile option to support Logs format
Reviewed By: dulmarod
Differential Revision: D6834538
fbshipit-source-id: 8c847f5
Summary:
Previously, we could understand than an access was safe either because it was possibly owned or protected by a thread/lock, but not both. If an access was both protected by a lock and rooted in a paramer (i.e., possibly owned), we would forget the ownership part of the precondition and remember only the lock bit. This leads to false positives in cases where an access protected by a lock is owned, but another unowned access to the same memory is not protected by a lock (see the new `unownedLockedWriteOk` E2E test for an example).
This diff makes access safety conditions disjunctive so we can simultaneously track whether an access is owned and whether an access is protected by a thread/lock. This will fix false positives like the one explained in T24015160.
Reviewed By: jberdine
Differential Revision: D6671489
fbshipit-source-id: d17715f
Summary:
- ast_node argument is now optional in functions `unimplemented` and `incorrect_assumption` in cFrontend_config
- The argument type was already an option, and the majority of the calls were with 'None'. This makes the function more intuitive to use
Reviewed By: sblackshear
Differential Revision: D6846141
fbshipit-source-id: 13deb8f
Summary:
We already knew not to warn when non-resource `Closeable`'s like `ByteArrayOutputStream` weren't closed, but we still warned on their subtypes.
This diff fixes that problem by checking subclasses in the frontend.
This also removes the need for Java source code models of non-resource types, so I removed them.
Reviewed By: jeremydubreil
Differential Revision: D6843413
fbshipit-source-id: 60fe7fb
Summary: The heuristics to determine the end of a block/procedure was too brittle, the new one ignores non significant instructions.
Reviewed By: jvillard
Differential Revision: D6845380
fbshipit-source-id: feab557
Summary:
The infer results directories in buck-out/ are "cleaned up" to avoid polluting
the Buck cache with too much data or non-deterministic data. In particular, the
runstate is deleted, which confused subsequent infer processes trying to read
the pre-existing results directory.
Add a special case in infer to delete pre-existing results directories in
buck-out instead of trying to load their state.
Reviewed By: mbouaziz
Differential Revision: D6845128
fbshipit-source-id: 5c716aa
Summary:
- `NonZeroInt` for added guarantees on the invariants of `SymLinear` coefficients
- some simplifications
- some optimizations
Reviewed By: jvillard
Differential Revision: D6833968
fbshipit-source-id: 39e28a0
Summary:
Make dead code detection part of `make test` so that dead code stops creeping
in. It's only enabled if all the analysers are enabled and if this is a
facebook build, because the dead code detection will have false positives
otherwise.
Reviewed By: mbouaziz
Differential Revision: D6807395
fbshipit-source-id: ebbd835
Summary:
This diff fixes the translation of `new` and `placement new` with one argument. If `placement new` has more than one argument it means that it is user-defined (this will be addressed in another diff).
update-submodule: facebook-clang-plugins
Reviewed By: sblackshear, mbouaziz
Differential Revision: D6807751
fbshipit-source-id: 7cf0290
Summary:
Before this diff, the `Ondemand` module would not cache the results of the function `analyze_proc_desc`, which is used by the toplvel iteration.
This should not have any effect on the performances at this point as the summaries were already cached in the `Specs` module. Now, we can start remove the use of the cache in the `Specs` module to avoid the duplication. Caching at the level of `Ondemand` is better as we can safely cache the information that the outcome of the analysis is `None`, which avoids scanning the filesystem or the DB multiple times.
Reviewed By: mbouaziz, jvillard
Differential Revision: D6713546
fbshipit-source-id: 309701b
Summary: This should allow to report several occurences of the an issue appearing several times within the same method.
Reviewed By: jvillard
Differential Revision: D6783298
fbshipit-source-id: 5555906
Summary: It was getting a bit difficult to tell which functions belonged where.
Reviewed By: jvillard
Differential Revision: D6764764
fbshipit-source-id: f9faada
Summary:
This lets us fix the limitation of reporting false positives when a `private` function calls `build()` on a parameter without passing all of the required props.
We will now report such issues in the caller only if it fails to pass the required props.
An unfortunate consequence of this change is that we lose track of where the actual call to `build` occurs--we now report on the declaration of the caller function rather than on the call site of `build`.
I'll work on addressing that in a follow-up.
Reviewed By: jeremydubreil
Differential Revision: D6764153
fbshipit-source-id: 3b173e5
Summary:
The captured variables of a closure are tuples (id, var, typ) with the implicit assumption
that &var -> id holds in the heap. This is true when the closure is created, but is not enforce otherwise.
This becomes a problem when the closure is stored in the heap, goes passed a bi-abduction, and then it's executed
(see new test). This was failing before this diff and now succeeds.
We add the verification of this constraint to the normalization of sigma.
At the moment I expect Precondition_not_met to be removed, but also later, we will be able to compute retain cycles
over the closures, as the correct captured variable info is kept through the execution.
Reviewed By: jvillard
Differential Revision: D6796525
fbshipit-source-id: a8a7655
Summary:
Not sure what an "iCFG" is but the dotty is only about CFGs anyway.
Diff obtained by mass-`sed`.
Reviewed By: sblackshear
Differential Revision: D6324280
fbshipit-source-id: b7603bb
Summary:
Also make it optional, since it's only used for debug messages. Name a couple
more of these for other similar functions.
Reviewed By: sblackshear
Differential Revision: D6797385
fbshipit-source-id: e6e9b2e
Summary:
I needed to do this for something, now I don't know if I want to do the thing
anymore but this seems generally useful to decrease a little bit the size of
Config.ml.
Reviewed By: sblackshear, mbouaziz
Differential Revision: D6796427
fbshipit-source-id: d9c009d
Summary:
Also, always log failures.
This also shows that the dead code detection does not detect dead exceptions :/
Reviewed By: jeremydubreil
Differential Revision: D6796843
fbshipit-source-id: 3d0ff5c
Summary:
Also, make it explicit when we load the global tenv instead of the per-file tenv.
This allows for some nice simplifications in some places, notably:
- `tenv_file` is gone from `Exe_env.file_data`
- `DB.global_tenv_fname` is no more
This will help moving the tenv from the capture/source_file/ directories on the
filesystem to the database, as keys for the relevant table are `SourceFile.t`.
Reviewed By: mbouaziz
Differential Revision: D6796594
fbshipit-source-id: 1ffd5b0
Summary:
The custom exception does not appear to serve any purpose. Also refactor the
complaining code to avoid duplication.
Reviewed By: mbouaziz
Differential Revision: D6784945
fbshipit-source-id: a2d969b
Summary:
They were constructed for each source file, and then joined into a global call
graph, only to get per-file lists of procedures. A tad wasteful.
Get this list from cfgs instead. Still record them in `exe_env` for now as
changing that code is a whole other beast.
One test falls victim of the flakiness of the analysis of recursive functions.
Reviewed By: jeremydubreil, mbouaziz
Differential Revision: D6324268
fbshipit-source-id: d5ff58f
Summary:
Last piece of significant logic relying on the call graph: the execution
environment. Mostly carve out the logic to detect duplicate symbols to not rely
on the call graph.
Also make the keys of the `file_map` be source files, because not having the
"cg filename" makes it harder otherwise.
Reviewed By: sblackshear
Differential Revision: D6621196
fbshipit-source-id: cab50ba
Summary:
In preparation for getting rid of call graphs, we need to find another way to
get the list of defined procedures (which is the only place where we use the
globally-computed call graph for now).
The natural way to get the list of procedures defined in a file is to load the
cfg for that file and look at the proc names that are the keys of the cfg. This
is way too expensive, as the CFG is big. Thus, we cache this list of proc names
as another column in the SQLite database of cfgs. This gives good performance
in benchmarks.
Reviewed By: jeremydubreil
Differential Revision: D6621142
fbshipit-source-id: ed265fe
Summary: At each call to `Component$Builder.build()`, checks that the required props for `Component` have been set via prior calls to the `Builder`. Does not yet handle `Prop(optional = true)`, but will address that in a follow-up.
Reviewed By: jeremydubreil
Differential Revision: D6735524
fbshipit-source-id: 0c812fd
Summary:
Record the db schema, infer version, and run dates into
infer-out/.infer_runstate.json. This allows us to check on startup whether the
results directory was generated using a compatible version of infer or not, and
give a better error message in the latter case than some SQLite error about
mismatching tables.
This will be used in a follow-up diff to record capture phases too, and avoid
relying on filesystem timestamps of the infer-out/capture/foo/ directories for
reactive analysis.
Had to change some tests Makefiles to make sure they do not attempt to re-use
stale infer-out directories, which would now fail the run.
The stale infer-out directory gets deleted if `--force-delete-results-dir` is
passed (but a warning still gets printed).
Reviewed By: mbouaziz
Differential Revision: D6760787
fbshipit-source-id: f36f7df
Summary:
This declutters `CommandLineOption` a little bit, and will be useful in a
follow-up diff where `InferCommand.t` will be used from an atd-generated file.
Reviewed By: mbouaziz
Differential Revision: D6772990
fbshipit-source-id: 3d32d00
Summary:
Previously imports with relative filenames would not get resolved so the result
would depend on where infer had been run from. Usually this was the project
root. Now, resolve path names of imports relative to the file doing the
`#IMPORT`. This changes behaviour most of the time.
Reviewed By: dulmarod
Differential Revision: D6784740
fbshipit-source-id: 4ccb7bf
Summary:
This changes the syntax for AL imports from `#IMPORT <file>` to `#IMPORT
"file"`. As a side-effect, the `file` part is now lex'd more permissively too.
Reviewed By: dulmarod
Differential Revision: D6784669
fbshipit-source-id: cc1bb73
Summary:
- During program translation, infer logs details about SelfClassException exceptions that are caught
- Logging is integrated with EventLogger library, uses existing FrontendException event type
- ast_node field in FrontEndException record used to store SelfClassException class_name field
- SelfClassException exception type extended to add support for storing exception details
- All instances where SelfClassException exception is raised modified to pass these details
Reviewed By: mbouaziz
Differential Revision: D6760513
fbshipit-source-id: a8efa9d
Summary:
- During program translation, infer logs details about IncorrectAssumption exceptions that are caught
- Logging is integrated with EventLogger library, uses existing FrontendException event type
- IncorrectAssumption exception type extended to add support for storing exception details
- All instances where IncorrectAssumption exception is raised modified to pass these details
Reviewed By: mbouaziz
Differential Revision: D6759287
fbshipit-source-id: 64f520e
Summary:
Reading a different .inferconfig makes little sense and is in contradiction
with the fact that we try hard to make all the infer processes agree on the set
of options.
Reviewed By: sblackshear
Differential Revision: D6761146
fbshipit-source-id: 67a0c54
Summary:
- During program translation, infer logs details about Unimplemented exceptions that are caught
- Exception type, source location, exception triggering location, and the ast_item it occurred in
- Logging is integrated with EventLogger library
- New type of event in EventLogger
- Unimplemented exception type extended to add support for storing these extra details
- All instances where unimplemented exception is raised modified to pass these details
Reviewed By: dulmarod
Differential Revision: D6748734
fbshipit-source-id: 725c7f3
Summary:
and add mli. We already had the logic for iterating over call chains, but it was overfitted to the should-update analysis.
Will use the generalized version in a follow-up.
Reviewed By: jvillard
Differential Revision: D6740692
fbshipit-source-id: 8c0d89f
Summary:
Getting double-logged messages when logs have not yet been setup is confusing,
so just don't log these messages to a log file.
Reviewed By: mbouaziz
Differential Revision: D6739173
fbshipit-source-id: 14db6b0