Summary:
Glorious, glorious man pages.
This changes a bunch of things that were hard to break up from the diff, so the
resulting diff is big.
Use `Cmdliner.Manpage` to format man pages (and also format a bit ourselves
since it is so stubborn).
As a bonus, introduce the following subcommands:
```
infer run ... # same as default mode with -- before
infer capture ... # -a capture
infer compile ... # -a compile
infer analyze ... # InferAnalyze
infer report ... # InferPrint
infer diff ... # this one is not new
infer clang ... # InferClang, not that you should use it
```
The man pages can still be improved a lot. Notable missing sections:
`ENVIRONMENT`, stuff about .inferconfig, some example usage, `DESCRIPTION`, ...
Reviewed By: jberdine
Differential Revision: D4921083
fbshipit-source-id: 9602230
Summary: This will be needed to generate man pages with an accurate date.
Reviewed By: jberdine, mbouaziz
Differential Revision: D4937498
fbshipit-source-id: b5ebd31
Summary:
Went through the trouble of killing these warnings, make sure they do not creep
up again in the future.
Reviewed By: mbouaziz
Differential Revision: D4937493
fbshipit-source-id: 0e2eda4
Summary:
We won't be needing to know the terminal size when we move the help to
manpages. Hopefully if we need C stubs again in the future we can refer back to
this diff to revive them.
Reviewed By: jberdine
Differential Revision: D4937491
fbshipit-source-id: 99139fa
Summary:
We lost InferClang++ a long time ago... It was installed properly on `make
install` but not during normal compilation!
Reviewed By: akotulski
Differential Revision: D4905947
fbshipit-source-id: 56375c2
Summary:
This debugger stops the execution of CTL during the evaluation of formulas, then shows useful info about the current state:
- Which formula is being evaluated
- In which part of the AST is such formula being evaluated
- Line number of the source file
- Whether a CTL-Transition will take place or not
- Node-ID that can be related to the dotty file containing the evaluation graph (the one in infer-out/lint_dotty/)
The AST is shown with coloured nodes, where each colour has the following meaning:
- [Default terminal colour], Bold: The node is being evaluated
- Green, Bold: The formula returned true on the current node
- Red, Bold: The formula returned false on the current node
Reviewed By: ddino
Differential Revision: D4834451
fbshipit-source-id: c9aa970
Summary:
We shouldn't install byte-executables unless the user types `make byte`.
Othewise everything gets very slow and the cause is not obvious.
Reviewed By: jeremydubreil
Differential Revision: D4779135
fbshipit-source-id: 757bfa2
Summary:
It can be useful when debugging infer or the Makefiles themselves to see what
`make` is doing. Instead of editing Makefiles to remove `@` now you can `make
VERBOSE=1`.
This is just `git ls-files | grep -e Makefile -e '.*\.make' | xargs sed -e 's/^\t@/\t$(QUIET)/' -i`, and adding the definition of `QUIET` to Makefile.config.
Reviewed By: jeremydubreil
Differential Revision: D4779115
fbshipit-source-id: e6e4642
Summary:
This removes the dependency of libffi, and gives better guarantees at
compile-time. A bit overkill to retrieve the width of the terminal but what do
you know...
Reviewed By: jberdine
Differential Revision: D4700003
fbshipit-source-id: 036989b
Summary: This is dead code, and depends on libffi which we could get rid of otherwise.
Reviewed By: jberdine
Differential Revision: D4705645
fbshipit-source-id: efd28ef
Summary:
This makes sure that one can run `./build-infer.sh` then `make`. Otherwise it's
not always clear what one should do to recompile infer, eg when `make` will
work and when `./build-infer.sh` should be used instead, in particular when the
user doesn't have opam configured for her terminal.
Reviewed By: jberdine
Differential Revision: D4698159
fbshipit-source-id: 5df8059
Summary:
This is useful to make sure `./build-infer.sh clang` and `./build-infer.sh
java` work correctly.
I had to move one unit test inside a new unit/clang/ directory used only if clang is enabled, and create a stub for it in unit/clang_stubs/ for when clang is disabled.
Renamed `OCAML_SOURCES` to the more consistent and descriptive `OCAML_CONFIG_SOURCES`.
Reviewed By: jeremydubreil
Differential Revision: D4571997
fbshipit-source-id: 9502114
Summary:
It's annoying that changing the Makefile or running `./configure` with
different options does not always retrigger compilation of some targets, eg
infer.
Reviewed By: akotulski
Differential Revision: D4571988
fbshipit-source-id: dda080f
Summary:
One gets very obscure errors when trying to run infer for clang when it was
compiled for Java, or vice-versa. This diff makes sure we crash early with the
appropriate error message. For instance:
```
$ ./build-infer java
$ infer -- clang -c hello.c
Uncaught exception:
(Failure
"Unsupported build mode: make/cc\
\nInfer was built with clang analyzers disabled.\
\nPlease rebuild infer with clang enabled.\
\n")
Raised at file "pervasives.ml", line 30, characters 22-33
Called from file "backend/infer.ml", line 398, characters 6-48
Called from file "backend/infer.ml", line 449, characters 20-38
$ infer --clang-compilation-db-files foo.json
Uncaught exception:
(Failure
"Unsupported build mode: clang compilation database\
\nInfer was built with clang analyzers disabled.\
\nPlease rebuild infer with clang enabled.\
\n")
Raised at file "pervasives.ml", line 30, characters 22-33
Called from file "backend/infer.ml", line 392, characters 8-65
Called from file "backend/infer.ml", line 449, characters 20-38
```
Reviewed By: sblackshear
Differential Revision: D4566641
fbshipit-source-id: d9a118f
Summary:
- inferbo introduced a dependency to extlib. When building Java analyzers, this
is implicitly pulled in by javalib, but it's missing when building only the
clang analyzers. Add `extlib` to the packages we build against.
- infer.ml and Javac.ml depend on Javalib, but it's easy to push down the code
that needs it to `jMain.ml` so that we can build without javalib for the
clang-only case.
- jMain.mli had 2 copies: one in java/ and one in java_stubs/. Make one a symlink to the other.
Reviewed By: jeremydubreil
Differential Revision: D4566581
fbshipit-source-id: 214a4eb
Summary:
Native compilation seems to take a couple of seconds to build the unit test
binary, but we don't need it to be native (and neither do users building infer
to install it on their machines). In fact, the test mode rebuilds it in
bytecode mode. For the sake of being able to run the unit tests when developing
on infer (and thus possibly while having some fatal warnings showing up in the
code, preventing us from building the test target), also build InferUnit in
bytecode mode.
Reviewed By: sblackshear, martinoluca
Differential Revision: D4537455
fbshipit-source-id: 374c84c
Summary:
Previously, we would first compute which build command is at hand, based on the
first argument after "infer --", then do everything depending on that piece of
information. However, the build command alone is not enough to know in which
"build mode" we are operating. For instance, there are several build modes
corresponding to "buck" build commands.
This led to duplication of the logic (to retrieve which build mode we are in in
the various phases of an infer run), and some invariants that had to be
re-asserted at various points in the code, eg that the arguments are not empty.
This diff adds a `build_mode` type (renaming the previous `build_mode` to
`build_system`) that identifies the various integrations we support. We compute
the build mode at the start of infer, then pass the build mode around.
Also, move `run_javac` to a new `integration/Javac.ml` file given that it's a
bit large.
Reviewed By: jberdine
Differential Revision: D4415074
fbshipit-source-id: db854a0
Summary:
1. One call to `Core.Std.String.slice` was wrong and caused the program to crash, and
2. The crash was silently ignored because the error code of uncaught OCaml
exceptions was the same as `CheckCopyright.copyright_malformed_exit_code` (=2)
Address both issues. Also build CheckCopyright with debug options.
Reviewed By: jberdine
Differential Revision: D4410306
fbshipit-source-id: d73b086
Summary:
`make byte` will populate infer/bin/ with bytecode version of each executable,
plus infer/bin/infer.byte (used to remember which of the native or byte
executables have been built most recently). `make infer` now also creates
infer/bin/infer.native, so that we're sure to replace the executables with
native/byte versions as appropriate.
This is to make debugging a tad easier:
make byte
ledit ocamldebug $(which infer) <infer args>
Whereas previously one had to:
make -C infer/src byte
ledit ocamldebug infer/_build/infer/backend/infer.byte <infer args>
Reviewed By: jberdine
Differential Revision: D4409476
fbshipit-source-id: ab5f57d
Summary:
C stubs were causing issues with building:
- need OCaml stubs of the C stubs for byte compilation!
- brittle (to remain polite) support in ocamlbuild
Ctypes is awesome, use it instead.
Slight wrinkle on the previous statement:
- ioctl(2) is variable arguments, which is not officially supported by Ctypes but should work in our use-case
- I'm hardcoding the value of a C macro found in system headers
Reviewed By: jberdine
Differential Revision: D4319507
fbshipit-source-id: 352804a
Summary:
This removes support for developing infer using Eclipse. If you use Eclipse,
consider using Atom/Emacs/vim instead, which have good OCaml/Reason support.
This allows us to get rid of a couple quirks:
- do not generated ocaml annots (this is very slow)
- move OCaml _build directory to infer/src/ where it makes more sense
Reviewed By: jberdine
Differential Revision: D4319480
fbshipit-source-id: 6f063fc
Summary:
Use In_channel and Out_channel operations instead of those in Pervasives. Don't
use physical equality on values that aren't heap-allocated since it doesn't help
the compiler generate faster code and the semantics is unspecified. Also use
phys_equal for physical equality.
Reviewed By: sblackshear
Differential Revision: D4232459
fbshipit-source-id: 36fcfa8
Summary:
Useful for refactoring purposes, to provide a list of modules in
dependency order.
Reviewed By: jeremydubreil
Differential Revision: D4232363
fbshipit-source-id: 2adaaf5
Summary:
This diff adds a dependency on ctypes.foreign and uses the example
binding of fts to implement remove_directory_tree.
Reviewed By: yunxing
Differential Revision: D4115569
fbshipit-source-id: 3509955
Summary:
`install` will not do anything if the file didn't change, which should give
`make` more opportunities to not do work.
Reviewed By: jeremydubreil
Differential Revision: D4161918
fbshipit-source-id: 9b9061a
Summary:
This diff ports checkCopyright to Core, builds it separately from other
executables, and fixes the build command in the linter.
Reviewed By: jvillard
Differential Revision: D4148217
fbshipit-source-id: 8aefc98
Summary: This fixes the build when `./configure --disable-c-analyzers` is used.
Reviewed By: jberdine
Differential Revision: D4146818
fbshipit-source-id: bec4b48
Summary:
InferClang knows what to do if its name ends in ++. So it is not
necessary to pass whether or not the original clang executable ended in
++ to InferClang using the the INFER_XX environment variable. Instead,
create an InferClang++ symbolic link and make the clang wrapper call
either InferClang or InferClang++ as needed.
Reviewed By: jvillard
Differential Revision: D4078416
fbshipit-source-id: 3b5d5d0
Summary:
This diff revises the makefiles for java tests so that they are based on
the files actually produced and depended on, instead of the existing
imperative style. This is, I think, clearer and easier to modify, and
enables a little more parallelism.
Reviewed By: jvillard
Differential Revision: D4072560
fbshipit-source-id: c16d4bd
Jules Villard
Andrzej Kotulski
Martino Luca
Dulma Churchill
Cristiano Calcagno
Kihong Heo
Josh Berdine
Yunxing Dai