Summary: This diff adds TryEntry and TryExit statements to the entry and exit of C++ `try` block, in order to handle exceptional control flow better in analyses.
Reviewed By: da319, jvillard
Differential Revision: D26946188
fbshipit-source-id: 33f4ae9e7
Summary:
D20769039 (cec8cbeff2) added a preanalysis step that creates edges from throw nodes to all reachable catch nodes. It intended to fix some deadstore FPs however it caused more damage than the fix itself. In particular, throws were connected irrespective of
- the type of the exception
- whether the try was surrounded by a catch
This in turn caused weird CFGs with dangling and impossible to understand nodes:(
This diff reverts this change for now.
Instead, the fix should probably be done in the frontend where we have more information about try/catch blocks.
Reviewed By: da319
Differential Revision: D25997475
fbshipit-source-id: bbeabfbef
Summary:
This is several inter-connected changes together to keep the tests
happy.
The ConditionalOperator `b?t:e` is translated by first creating a
placeholder variable to temporarily store the result of the evaluation
in each branch, then the real thing we want to assign to reads that
variable. But, there are situations where that changes the semantics of
the expression, namely when the value created is a struct on the stack
(eg, a C++ temporary). This is because in SIL we cannot assign the
*address* of a program variable, only its contents, so by the time we're
out of the conditional operator we cannot set the struct value
correctly anymore: we can only set its content, which we did, but that
results in a "shifted" struct value that is one dereference away from
where it should be.
So a batch of changes concern `conditionalOperator_trans`:
- instead of systematically creating a temporary for the conditional,
use the `trans_state.var_exp_typ` provided from above if available
when translating `ConditionalOperator`
- don't even set anything if that variable was already initialized by
merely translating the branch expression, eg when it's a constructor
- fix long-standing TODO to propagate these initialization facts
accurately for ConditionalOperator (used by `init_expr_trans` to also
figure out if it should insert a store to the variable being
initialised or not)
The rest of the changes adapt some relevant other constructs to deal
with conditionalOperator properly now that it can set the current
variable itself, instead of storing stuff inside a temp variable. This
change was a problem because some constructs, eg a variable declaration,
will insert nodes that set up the variable before calling its
initialization, and now the initialization happens *before* that setup,
in the translation of the inner conditional operator, which naturally
creates nodes above the current one.
- add a generic helper to force a sequential order between two
translation results, forcing node creation if necessary
- use that in `init_expr_trans` and `cxxNewExpr_trans`
- adjust many places where `var_exp_typ` was incorrectly not reset when translating sub-expressions
The sequentiality business creates more nodes when used, and the
conditionalOperator business uses fewer temporary variables, so the
frontend results change quite a bit.
Note that biabduction tests were invaluable in debugging this. There
could be other constructs to adjust similarly to cxxNewExpr that were
not covered by the tests though.
Added tests in pulse that exercises the previous bug.
Reviewed By: da319
Differential Revision: D24796282
fbshipit-source-id: 0790c8d17
Summary:
We were missing assignment to captured variables with initializers.
Consider the following example:
```
S* update_inside_lambda_capture_and_init(S* s) {
S* object = nullptr;
auto f = [& o = object](S* s) { o = s; };
f(s);
return object;
}
```
which was translated to
```
VARIABLE_DECLARED(o:S*&);
*&o:S*&=&object
*&f =(_fun...lambda..._operator(),([by ref]&o &o:S*&))
```
However, we want to capture `o` (which is an address of `object`), rather `&o` in closure.
After the diff
```
VARIABLE_DECLARED(o:S*&);
*&o:S*&=&object
n$7=*&o:S*&
*&f =(_fun...lambda..._operator(),([by ref]n$7 &o:S*&))
```
Reviewed By: jvillard
Differential Revision: D23567346
fbshipit-source-id: 20f77acc2
Summary:
- Add `no_return` models for Java's `exit(...)` methods (can be extended further later on)
- handle throw-catch better by short-cutting throw nodes to not exit node but to all **catch nodes** that are reachable by the node. If there is no catch node, we short-cut to the exit node as before.
This removes a FP from deadstore tests because before we simply were not able to handle CF from throw-> catch nodes at all.
Reviewed By: skcho
Differential Revision: D20769039
fbshipit-source-id: e978f6cdb
Summary:
These have proved to be too fragile to maintain as they would often break
compilation of user code. They have been off by default for more than a year
now (D7350715).
Removing the include models shows a more accurate picture of what infer results
look like in production. As such, lots of tests have changed, mostly
biabduction but also in inferbo. SIOF was using include-based models too but
now libc++ is better and iostreams are implemented in a way that SIOF
understands (instead of being magical creatures) so nothing changed there.
Reviewed By: skcho
Differential Revision: D16602171
fbshipit-source-id: ce38f045b
Summary:
Add an option to specify some classes that we really want to warn about
with the liveness checker, even when they appear used because of the
implicit destructor call inserted by the compiler.
Reviewed By: mbouaziz
Differential Revision: D13991129
fbshipit-source-id: 7fafdba84
Summary: When a `VarDecl` has the attribute `unused` then do not assign its initialisation result to the corresponding variable.
Reviewed By: ngorogiannis
Differential Revision: D13974497
fbshipit-source-id: 28029f995
Summary: We do not want to export unnecessary information from clang plugin, hence, the solution to this false positive would be to annotate with `__unused__` attribute.
Reviewed By: jvillard
Differential Revision: D13861333
fbshipit-source-id: 774009f37
Summary:
It enables the translation of casting expression. As of now, it
translates only the castings of pointers to integer types, in order to
avoid too much of change, which may mess the checkers up.
Reviewed By: jvillard
Differential Revision: D12920568
fbshipit-source-id: a5489df24
Summary: We had a special case for fixing false positives on constexpr implicitly captured by lambdas. However, we do not report dead stores on constexpr anymore, hence, do not need the special case anymore. Moreover, the special case was not only capturing constexpr in lambdas, but also any variables which type had `const` (see new test `capture_const_bad` which was not being reported before this diff)
Reviewed By: mbouaziz
Differential Revision: D9654848
fbshipit-source-id: 882fd2804
Summary: We report dead store false positives in template arguments when constexpr is used. To remove the false positives, with the expense of some false negatives, we do not report dead stores on constexpr anymore.
Reviewed By: mbouaziz
Differential Revision: D9608095
fbshipit-source-id: 91b0c71c4
Summary: Exceptional successors were not meant to be created for return nodes, but they were created if try block had a single return statement.
Reviewed By: jvillard
Differential Revision: D8913371
fbshipit-source-id: 6ac85b21d
Summary:
These just point to expressions that we know how to translate.
Fixes#950
Reviewed By: mbouaziz
Differential Revision: D8713784
fbshipit-source-id: 9eafa39
Summary:
It's useful to test that the bucket a given error is classified as doesn't
change over time without notice.
This records the bucket for *all* the tests, even though some never produce a
bucket. This is to be on the safe size instead of risking to forget adding the
bucket information when the test changes, or when copy/pasting from a test that
doesn't have buckets to one that does.
The implementation is pretty crude: it greps the beginning of the qualifier
string for a `[bucket]`.
Reviewed By: mbouaziz
Differential Revision: D8236393
fbshipit-source-id: b3b1eb9
Summary:
Change the license of the source code from BSD + PATENTS to MIT.
Change `checkCopyright` to reflect the new license and learn some new file
types.
Generated with:
```
git grep BSD | xargs -n 1 ./scripts/checkCopyright -i
```
Reviewed By: jeremydubreil, mbouaziz, jberdine
Differential Revision: D8071249
fbshipit-source-id: 97ca23a
Summary:
This diff:
- translates C++ `catch` blocks
- adds an exceptional control-flow edge from the end of a `try` block to the beginning of a `catch` block
This obviously doesn't reflect the way exceptions actually work, but I think it is better than what we have now. For one thing, we'll see/translate code inside `catch` blocks, which were opaque before. If Clang analyses don't want this behavior, they can simply use `ProcCfg.Normal` (which, up until this diff, behaved identically to `ProcCfg.Exceptional`.
In the future, we can extend `trans_state` to track blocks that might throw an exception, and have each of these blocks transition to `catch` instead.
Reviewed By: jvillard
Differential Revision: D7814521
fbshipit-source-id: 67b86a6
Summary:
Before D7100561, the frontend translated capture-by-ref and capture-by-value in the same way.
Now we can tell the difference and report bugs in the capture-by-value case.
Reviewed By: jeremydubreil
Differential Revision: D7102214
fbshipit-source-id: e9d3ac7
Summary:
You can capture a variable by reference in a lambda, assign to it, and then invoke the lambda.
This looks like a dead store from the perspective of the current analysis.
This diff mitigates the problem by computing an additional analysis that tracks variables captured by ref at each program point.
It refuses to report a dead store on a variable that has already been captured by reference.
Later, we might want to incorporate the results of this analysis directly into the liveness analysis instead of just using it to gate reporting.
Reviewed By: jeremydubreil
Differential Revision: D7090291
fbshipit-source-id: 25eeffa
Summary:
As da319 points out, we did not handle this case correctly before. There were a few reasons why:
(1) An assignment like `struct S s = mk_s()` gets translated as `tmp = mk_s(); S(&s, tmp)`, so we didn't see the write to `s`.
(2) We counted uses of variables in destructors and dummy `_ = *s` assignments as reads, which meant that any struct values were considered as live.
This diff fixes these limitations so we can report on dead stores of struct values.
Reviewed By: da319
Differential Revision: D6327564
fbshipit-source-id: 2ead4be
Summary:
The "placement new" operator `new (e) T` constructs a `T` in the pre-allocated memory address `e`.
We weren't translating the `e` part, which was leading to false positives in the dead store analysis.
Reviewed By: dulmarod
Differential Revision: D5814191
fbshipit-source-id: 05c6fa9
Summary:
When a lambda has an `auto` parameter, the inferred type of the parameter because part of the name.
Our heuristic for identifying lambda was checking if the lambda's name was exactly `operator()`, which won't catch this case.
Reviewed By: jvillard
Differential Revision: D5753323
fbshipit-source-id: 85ff75a
Summary:
Not translating these properly was causing false positives for the dead store analysis in cases like
```
int i = 0;
return [j = i]() { return j; }();
```
Reviewed By: da319
Differential Revision: D5731562
fbshipit-source-id: ae79ac8
Summary:
Pretty basic: warn when we see an assignment instruction `x = ...` and `x` is not live in the post of the instruction.
Only enabled for Clang at the moment because linters already warn on this for Java. But we can enable it later if we want to (should be fully generic).
Reviewed By: jeremydubreil
Differential Revision: D5450439
fbshipit-source-id: 693514c
Sungkeun Cho
Ezgi Çiçek
Jules Villard
Daiva Naudziuniene
David Lively
Mehdi Bouaziz
Sam Blackshear
Jeremy Dubreil