Summary:
`ocamlc` didn't tell us but there are a bunch of dead exceptions in
`Exceptions.ml` that translate into dead issue types.
Found with:
```
for ex in $(grep -o -e '^exception [^ ]*' infer/src/IR/Exceptions.mli | cut -d ' ' -f 2); do git grep -q -e '\braise .*'$ex || git grep -q -e 'Exceptions\.'$ex || echo $ex; done
```
Reviewed By: skcho
Differential Revision: D21618645
fbshipit-source-id: f60a3f445
Summary:
We stopped relying on an external perf data file to determine which functions are on the cold start. Let's remove this issue now.
NB: Keeping the `--perf-profiler-data-file` as deprecated to prevent issues on the CI and prod.
Reviewed By: skcho
Differential Revision: D21594150
fbshipit-source-id: faa58782d
Summary:
In the previous diff we changed the semantics of nested classes w.r.t.
to Nullsafe.
Let's make it clear if users will attempt to misuse it.
Reviewed By: artempyanykh
Differential Revision: D21230717
fbshipit-source-id: 0ecc0dd06
Summary:
It is true that `Info` issues are normally not intended for the end user
and in general should be hidden by default.
However, the current behavior - show them only if `--no-filtering` is
true - is super non-intuitive and complicates already complex reporting
logic.
Lets use the general "enable/disable" mechanism for controlling this.
Reviewed By: jvillard
Differential Revision: D21154140
fbshipit-source-id: 69e4c88e4
Summary:
This information can be useful for tooling responsible for further
processing (e.g. metric calculation and logging)
Reviewed By: artempyanykh
Differential Revision: D20914583
fbshipit-source-id: 61804d88f
Summary:
Seems like a more sensible name. Most tooling should read report.json so
won't notice.
Still output a bugs.txt file with a message to point to report.txt while
people migrate.
Reviewed By: mityal, artempyanykh
Differential Revision: D20626111
fbshipit-source-id: efb84d098
Summary:
The documentation of `--quiet` dates back from when it applied only to
`InferPrint.ml`. Make it more general and more in line with
expectations one might have about a `--quiet` option:
- change the doc
- make it disable the progress bar
Reviewed By: ngorogiannis
Differential Revision: D20626110
fbshipit-source-id: db096fd31
Summary:
This is likely not the final refinement, rather one step forward.
We classify all classes by 3 categories:
- Nullsafe and 0 issues
- can add Nullsafe and will be 0 issues
- the rest (class needs improvement)
Each class will fall into exactly one category.
Error messaging is WIP, they are not intended to be surfaced to the user
just yet.
Note how this diff uses the result of the previous refactoring.
Reviewed By: artempyanykh
Differential Revision: D20512999
fbshipit-source-id: 7f462d29d
Summary:
First version of a new memory leak check based on Pulse. The idea is to examine unreachable cells in the heap and check that the "Allocated" attribute is available but the "Invalid CFree" isn't. This is done when we remove variables from the state.
Currently it only works for malloc, we can extend it to other allocation functions later.
Reviewed By: jvillard
Differential Revision: D20444097
fbshipit-source-id: 33b6b25a2
Summary:
This diff is doing three things:
1. Finishes work paved in D20115024, and applies it to nullsafe. In that diff, we hardened API for
file level analysis. Here we use this API in nullsafe, so now we can
analyze things on file-level, not only in proc-level like it was before!
2. Introduces a class-level analysis. For Nullsafe purposes, file is not
an interesting granularity, but we want to analyze a lot of things on
file level. Interesting part here is anonymous classes and how we link
them to their corresponding user-defined classes.
3. Introduces a first (yet to be improved) implementation of class-level
analysis. Namely it is "meta-issues" that tell what is going with class
on high level. For now these are two primitive issues, and we will
refine them in follow up diffs. They are disabled by default.
Follow ups include:
1. Refining semantics of meta-issues.
2. Adding other issues that we could not analyze before or analyzed not
user friendly. Most importantly, we will use it to improve reporting for
FIELD NOT INITIALIZED, which is not very user friendly exactly because
of lack of class-level aggregation.
Reviewed By: artempyanykh
Differential Revision: D20417841
fbshipit-source-id: 59ba7d2e3
Summary:
This was never quite finished and inferbo has a new way to do sort of
the same thing.
Reviewed By: skcho, ngorogiannis
Differential Revision: D20362619
fbshipit-source-id: 7c7935d47
Summary:
Make <infer-out>/report.json the default value for this option, as this
is what is used 99% of the time. Clean up test options using this.
Reviewed By: ngorogiannis
Differential Revision: D20362644
fbshipit-source-id: a1bb18757
Summary:
InferPrint hasn't been in charge of writing bugs.txt since forever.
This will be re-implemented as a post-processing of report.json instead
(like it is now, but in OCaml instead of python).
Reviewed By: ngorogiannis
Differential Revision: D20362641
fbshipit-source-id: 83d8cb53d
Summary:
These were not used (and were actually activated byt the same config
param). They both are in experimental stage that never reached maturity.
Since the team does not have immediate plans to work on ObjC nullability
checker; and since "eradicate" (now known as nullsafe) is the main
solution for Java, removing it is sensible.
Reviewed By: jvillard
Differential Revision: D20279866
fbshipit-source-id: 79e64992b
Summary:
This diff renames `ZERO_XXX` issues to more appropriately named and descriptive
`XXX_UNREACHABLE_AT_EXIT` and replaces bottom with
unreachable in cost kinds and issues.
Reviewed By: skcho
Differential Revision: D20140301
fbshipit-source-id: eb6076b30
Summary:
Add support for nullsafe mode with `trust=all` and `trust=none` a case
with a specific trust list is not supported yet and needs to be
implemented separately.
Tests introduce one unexpected
`ERADICATE_INCONSISTENT_SUBCLASS_PARAMETER_ANNOTATION` issue which
complains about `this` having incorrect nullability; it is a bug and
needs to be fixed separately.
Reviewed By: mityal
Differential Revision: D19662708
fbshipit-source-id: 3bc1e3952
Summary: We don't use allocation costs in prod at the moment. There is no plan to do so in the near future. Let's not report them anymore and also save some space in `costs-report.json`.
Reviewed By: skcho
Differential Revision: D19766828
fbshipit-source-id: 06dffa61d
Summary:
This diff introduces two issue types: `BUFFER_OVERRUN_T1` and `INFERBO_ALLOC_IS_TAINTED`, which
denotes tainted values are used in array accesses and memory allocations, respectively.
Note that the taint analysis is intra-procedural for now.
Reviewed By: ezgicicek
Differential Revision: D19410536
fbshipit-source-id: af85148ec
Summary: This adds a check for when developers use weakSelf (and maybe strongSelf) in a block, when there is no need for it, because it won't cause a retain cycle. In general there is an annotation in Objective-C for methods that take blocks, NS_NOESCAPE, that means that the passed block won't leave the scope, i.e. is "no escaping". So we report when weakSelf is used and the block has the annotation.
Reviewed By: ngorogiannis
Differential Revision: D19662468
fbshipit-source-id: f5ac695aa
Summary:
Adding a new check as part of the SelfInBlock checker, for cases when a strong pointer to self, that is not self, is captured in the block.
This will cover the following wrong scenarios:
1. strongSelf is a local variable in a block as it should be, and then it's used in a sub-block, in which case it's a captured variable.
2. weakSelf is defined without the weak attribute by mistake.
Reviewed By: ngorogiannis
Differential Revision: D19538036
fbshipit-source-id: 151871745
Summary: Raises an error when weakSelf is used multiple times in a block. The issue is that there could be unexpected behaviour. Even if `weakSelf` is not nil in the first use, it could be nil in the following uses since the object that `weakSelf` points to could be freed anytime.
Reviewed By: skcho
Differential Revision: D18765493
fbshipit-source-id: 37fc652e3
Summary:
Now we point to the root cause of the problem, and also provide
actionable way to solve the issue
Reviewed By: artempyanykh
Differential Revision: D18575650
fbshipit-source-id: ba4884fe1
Summary:
Note: Disabled by default.
Having some support for values, we can report when a null or constant
value is being dereferenced. The particularity here is that we don't
report when 0 is a possible value for the address, or even if we know
that the value of the address can only be 0 in that branch! Instead, we
allow ourselves to report only when we the address has been *set* to
NULL (or any constant).
This is in line with how pulse deals with other issues: only report when
1. we see an address become invalid, and
2. we see the same address be used later on
Reviewed By: skcho
Differential Revision: D17665468
fbshipit-source-id: f1ccf94cf
Summary:
The variable strongSelf, because it is equal to a weak captured pointer, needs to be checked for null before being used, otherwise it could be null by the time the block is executed.
Added this check to the SelfInBlock checker, and removed it from biabduction.
We want to migrate all the objc checks from biabduction, so it will be easier to change and faster and more reliable. Moreover, this check is more general, it will flag any use of unchecked strongSelf, not just a dereference.
Reviewed By: skcho
Differential Revision: D18403849
fbshipit-source-id: a9cf5d80b
Summary:
Let's introduce a set of new cost analysis issue types that are raised when the function is statically determined to run on the UI thread. For this, we rely on the existing `runs_on_ui_thread` check that is developed for RacerD. We also update the cost summary and `jsonbug.cost_item` to include whether a method is on the ui thread so that we don't repeatedly compute this at diff time for complexity increase issues.
Note that `*_UI_THREAD` cost issues are assumed to be more strict than `*_COLD_START` reports at the moment. Next, we can also consider adding a new issue type that combines both such as `*_UI_THREAD_AND_COLD_START` (i.e. for methods that are both on cold start and run on ui thread).
Reviewed By: ngorogiannis
Differential Revision: D18428408
fbshipit-source-id: f18805716
Summary: We only care about expensive invariant calls. Let's disable the usual one since it is not used and there is no point filling up our dbs.
Reviewed By: dulmarod
Differential Revision: D18298530
fbshipit-source-id: 7a933c8da
Summary:
Describe what the --report-*-* options actually do instead of their
outdated documentation from the time where this was
`--checkers-blacklist-regex`, `--infer-blacklist-regex` and the like.
Reviewed By: dulmarod, mityal
Differential Revision: D17906015
fbshipit-source-id: 204349e9e
Summary:
The documentation and uses of filtering disagree. One typical usage is deduplication.
Split that where obvious, add comments where not obvious, and leave alone when obviously unrelated to deduplication.
Reviewed By: mityal
Differential Revision: D17715329
fbshipit-source-id: ec757927b
Summary:
Introduce a new experimental checker (`--impurity`) that detects
impurity information, tracking which parameters and global variables
of a function are modified. The checker relies on Pulse to detect how
the state changes: it traverses the pre and post pairs starting from
the parameter/global variable and finds where the pre and post heaps
diverge. At diversion points, we expect to see WrittenTo/Invalid attributes
containing a trace of how the address was modified. We use these to
construct the trace of impurity.
This checker is a complement to the purity checker that exists mainly
for Java (and used for cost and loop-hoisting analyses). The aim of
this new experimental checker is to rely on Pulse's precise
memory treatment and come up with a more precise im(purity)
analysis. To distinguish the two checkers, we introduce a new issue
type `IMPURE_FUNCTION` that reports when a function is impure, rather
than when it is pure (as in the purity checker).
TODO:
- improve the analysis to rely on impurity information of external
library calls. Currently, all library calls are assumed to be nops,
hence pure.
- de-entangle Pulse reporting from analysis.
Reviewed By: skcho
Differential Revision: D17051567
fbshipit-source-id: 5e10afb4f
Summary:
This check was an incomplete attempt to make nullsafe check nutritious
annotations for fields that get modified.
This was never fully productionized, and this check is turned off by
default.
In near future, we don't anticipate supporting this feature, so let's
remove it to simplify the code.
Reviewed By: artempyanykh
Differential Revision: D17282015
fbshipit-source-id: d63a2f1f7
Summary: Use_after_free was used both for biabduction and pulse, and the biabduction version is blacklisted by default. As a result, the Pulse version was also disabled unintentionally. This changes the name of the old use_after_free so that now we can get use_after_free bugs whenever pulse is enabled.
Reviewed By: skcho
Differential Revision: D17182687
fbshipit-source-id: 539ca69de
Summary:
`Present` annotation was an experiment made many years ago that never
got into real usage. The idea was to annotate Optional<> types with
Present, which means that it is safe to call get().
We don't plan to support `Present` annotation for optional types in the
near future.
Support of `Present` annotation requires extra levels of abstraction
that make the changing the behavior and introducing new features harder.
A lot of checks for nullability are written in generic way so they also
check for presense.
Getting rid of that will allow us to simplify our
work for introducing new semantics for nullsafe.
Reviewed By: ngorogiannis
Differential Revision: D17153432
fbshipit-source-id: c5ea9bdf1
Summary:
I found it very confusing that running infer with --debug makes the
report to be different.
Intuitively, I expect (and I think majority of users would expect) that
`--debug` makes things more verbose (and potentially more slow / consuming
more memory and disk space), but does not change anything apart from it.
One pro of preserving existing behavior, pointed by jvillard:
- Suppose some check is experimental or disabled in the config. The
users expect the issue to be found, but it does not show up. They run
`infer --debug` to understand the behavior, and suddenly the issue shows
up.
I, hovewer, find this pro not important enough and potentially confusing
the users even more.
(If they want to investigate seriously, they can always use
--no-filtering, and there are a lot of cases when the issue does not
show up for others, much hard to undertand reasons, than the fact that
it is disabled).
Reviewed By: jvillard
Differential Revision: D17113750
fbshipit-source-id: 46cc93503
Summary:
The default values of config options can sometimes depend on build-time
configuration values. This makes checking that the manuals "remain the same"
trickier as the manuals can be different depending on the platform. This
removes *all* default values from the checked-in manuals. We could be more
fine-grained and scrub only the values that are susceptible to change but for
now this is probably good enough.
This is done by implementing new options `--help-scrubbed` and
`--help-scrubbed-full` and using these in our tests instead of `--help` and
`--help-full` (which remain unaffected).
Also don't wrap the default values in `$(i,...)` anymore because the defaults
can trigger line breaks and then the man page is ill-formatted because that
format is stupid.
Reviewed By: mityal
Differential Revision: D16543779
fbshipit-source-id: bc929ff8c
Summary:
- Add allocation costs to `costs-report.json` and enable diffing over allocation costs.
- Also, let's be more consistent and modular in naming our cost issues.
- introduce a generic issue type `X_TIME_COMPLEXITY_INCREASE` where `X` can be one of the cost kinds. If the function is on the cold start, issue can have the `COLD_START` suffix. Similarly for infinite/zero/expensive calls.
- Change `PERFORMANCE_VARIATION` -> `EXECUTION_TIME_COMPLEXITY_INCREASE`
- Add new issue type for `ALLOCATION_COMPLEXITY_INCREASE_COLD_START` which will be enabled by default
- Refactor cost issues to be more modular and succinct. This also makes addition of a new cost kind very easy by adding the kind into the `enabled_cost_kinds` list in `CostKind.ml`
Reviewed By: mbouaziz
Differential Revision: D15822681
fbshipit-source-id: cf89ece59
Summary:
This is a simple checker that identifies inefficient uses of `keySet` iterator where (not only the key but also) the value is accessed via `get(key)`. It is more efficient to use `entrySet` iterator which already returns both key-value pairs. This optimization would get rid of many extra lookups which can be expensive.
We simply traverse the CFG starting from the loop head upwards and pick up the map that is iterated over. Then, we check in the loop nodes if there is a call to `get(...)` over this map. If, so we report.
Reviewed By: ngorogiannis
Differential Revision: D15737779
fbshipit-source-id: 702465b4e
Summary: Previously there was no way of getting that list from the manual.
Reviewed By: jeremydubreil
Differential Revision: D15158598
fbshipit-source-id: 1705ed59d
Jules Villard
Ezgi Çiçek
Mitya Lyubarskiy
Dulma Churchill
Artem Pianykh
Nikos Gorogiannis
Sungkeun Cho
Radu Grigore
Dino Distefano
Jeremy Dubreil