Summary:
Before this diff, it gave up pruning of linear bound by minmax bound.
For example, `overapprox_min (x+c1, c2+min(d1,y))` was `x+c1`.
However, we can get a bit more preciser value as follows.
```
overapprox_min (x+c1, c2+min(d1,y))
<= min (x+c1, c2+d1)
= c1+min(c2+d1-c1, x)
```
Reviewed By: ezgicicek
Differential Revision: D16543837
fbshipit-source-id: 8fdbce097
Summary:
- make most behaviours independent of the java version so that either works fine without user intervention
- modify regexp used to parse `javac` output to work for all versions
- no need to be sure we are in Java 11 to match java 11-only method name in quandary
- for the rest, provide a command-line flag to specify the java version manually in case it differs from the version that infer was built against
- this only affects the Maven integration for now
To do all that, also change the configure script to record the version of java instead of just a boolean for whether it's >= 10.
Reviewed By: ezgicicek
Differential Revision: D16493988
fbshipit-source-id: 622e91b25
Summary:
The default values of config options can sometimes depend on build-time
configuration values. This makes checking that the manuals "remain the same"
trickier as the manuals can be different depending on the platform. This
removes *all* default values from the checked-in manuals. We could be more
fine-grained and scrub only the values that are susceptible to change but for
now this is probably good enough.
This is done by implementing new options `--help-scrubbed` and
`--help-scrubbed-full` and using these in our tests instead of `--help` and
`--help-full` (which remain unaffected).
Also don't wrap the default values in `$(i,...)` anymore because the defaults
can trigger line breaks and then the man page is ill-formatted because that
format is stupid.
Reviewed By: mityal
Differential Revision: D16543779
fbshipit-source-id: bc929ff8c
Summary:
This diff prevents that the latest prune value is overwritten as top
from callees.
Reviewed By: jvillard
Differential Revision: D16540391
fbshipit-source-id: bdd5b42ed
Summary:
This diff improves the precision of the mod operator.
For example, result of x % c (when x>=0 and c>0) is
(before) [0, c-1]
(after) [0, min(c-1,x)]
Reviewed By: ezgicicek
Differential Revision: D16518578
fbshipit-source-id: a68660ee7
Summary: This diff tries to do weak update for the abstract locations by pointer arithmetic, e.g. `p[n]` or `p+n`, even if the type of `p` is declared as a simple pointer, not an array.
Reviewed By: ezgicicek
Differential Revision: D16458367
fbshipit-source-id: 3b4cdd7e4
Summary:
A test that records the expected output of:
- reverse analysis call graph
- introduced/pre-existing/fixed issues
- cost analysis results
Currently only the call graph is non-empty.
Reviewed By: PhoebeMay
Differential Revision: D16495470
fbshipit-source-id: f186d73d2
Summary:
The `represents_multiple_values` flag was adopted to decide whether updating abstract value strongly or weakly. However, the flag was included in the `Val` domain, which is strange, because it is a property of abstract locations, rather than abstract values. This makes the behavior of memory update function depend on the abstract value to update, making its code complicated.
This diff detach the `represents_multiple_values` flag from the `Value` domain, thus the memory update does not depend on the abstract value. Since this is a refactoring, I believe the diff should not make many semantic changes.
Reviewed By: ezgicicek
Differential Revision: D16441734
fbshipit-source-id: 4c10779d7
Summary: The reverse analysis call-graph is logged if `--debug-level-analysis` > 0, so that its value can be inspected for tests
Reviewed By: jvillard
Differential Revision: D16440567
fbshipit-source-id: 1ec6af1f3
Summary:
Pulse didn't treat local variables going out of scope as invalidating the corresponding address in memory. This diff fixes that by
- marking all local variables that exits the scope with the attribute `AddressOfStackVariable`
- before we write the summary for the proc, we make sure to invalidate all such addresses local to the procedure as `Invalid.` If such an address is read, then we would raise a use-after-lifetime issue.
Reviewed By: jvillard
Differential Revision: D16458355
fbshipit-source-id: 3686524cb
Summary: This implements incremental diff analysis by deleting only the summaries that need to be re-analyzed, keeping all summaries corresponding to procedures that have not been changed (or had a callee change).
Reviewed By: jvillard
Differential Revision: D16358474
fbshipit-source-id: 660a704a0
Summary: Incremental analysis relies on analysis results in the results directory, so don't delete this directory if `--incremental-analysis` is used
Reviewed By: jvillard
Differential Revision: D16458113
fbshipit-source-id: bf7c63cb3
Summary:
The same logic for reading the env var and defaulting to the local
results dir was duplicated in a bunch of places.
Reviewed By: artempyanykh
Differential Revision: D16458976
fbshipit-source-id: 41f1a4f9c
Summary:
There was a little bit of code duplication around `analyze_proc` to deal with
the fact that we may be starting from either a proc name or a proc desc. Create
a new `callee` type that represents this more explicitly. This allows not
loading the `proc_desc` eagerly when we don't need it, although that doesn't
seem to impact perf measurably.
Reviewed By: ezgicicek
Differential Revision: D16442221
fbshipit-source-id: 8e8ebbd6b
Summary:
TL;DR: Until this patch, if you ran infer on MacOS Mojave you most
likely would get an error related to missing header files. Now infer
tries to automatically locate current MacOS SDK path thus providing a
better experience for first time users.
Consider helloworld.c
```
#include <stdio.h>
int main()
{
return 0;
}
```
Invoking the analysis `infer -- cc -c helloworld.c` fails with
facebook-clang-plugins/.../include/c++/v1/stdio.h:108:15: fatal error: 'stdio.h' file not found
The reason for this is twofold:
1. infer uses its own clang, not Apple's one (thus custom paths are
not properly setup).
2. Apple stopped copying standard headers from SDK to /usr/include.
Reviewed By: jvillard
Differential Revision: D16377866
fbshipit-source-id: c336ad64f
Summary: This test wasn't building correctly or being called by the toplevel makefile
Reviewed By: jvillard
Differential Revision: D16458386
fbshipit-source-id: 48a0c2f36
Summary:
:
In previous commits we introduced deriving capabilities in Backend stats.
Now we can rewrite the code so that usage of all fields is enforced at compile time.
Reviewed By: jvillard
Differential Revision: D16458130
fbshipit-source-id: aef751440
Summary:
As discussed in D16358474, the options `--reanalyze` and `--incremental-analysis` are not compatible
This diff warns about the compatibility problem in the documentation
Reviewed By: jvillard
Differential Revision: D16440482
fbshipit-source-id: ab841ace6
Summary:
Minor improvements to a bunch of stuff
- mostly, always log backend stats and time spent analysing, regardless of `-j 1`
- output stats more like they appear in the record
- split `InferAnalyze.main` to be more readable (hopefully)
Reviewed By: mityal
Differential Revision: D16440586
fbshipit-source-id: 6f91f53cd
Summary:
It's a bit more annoying to `incr` but is more uniform with the other
`mutable` field.
Reviewed By: ngorogiannis
Differential Revision: D16359027
fbshipit-source-id: 817cd94a0
Summary:
Modify the scheduler to collect results from children at the end of the
parallel execution. Use this to collect backend stats and log their
aggregated sum.
Reviewed By: ezgicicek
Differential Revision: D16358867
fbshipit-source-id: 775792ef7
Summary:
Use it to trace summary stats. It will be used more/better in future
diffs that aggregates stats across parallel workers.
Reviewed By: ezgicicek
Differential Revision: D16358868
fbshipit-source-id: 764614153
Summary:
Summary.ml defines both a bunch of types and how to use them and a
mechanism to save and store summaries on disk while maintaining a
complex in-memory cache of what's on disk. Make the distinction clear.
Reviewed By: ngorogiannis
Differential Revision: D16358869
fbshipit-source-id: 9d4c6cb77
Summary:
It downgrades issues of void pointer to L5, because of its impreciseness. This is not
ideal but Inferbo cannot analyze arrays pointed by void pointers precisely at the moment.
Reviewed By: jvillard
Differential Revision: D16379911
fbshipit-source-id: f2c016aba
Summary:
Fixes#1126
Different checks contain some ad hoc places that look at this param, but there is no systematic way to suppress this.
The centralized place that is filtering results is `reporting.ml`.
Note that this diff does not remove other usages, because they do more than mere filtering results.
Reviewed By: jvillard
Differential Revision: D16339655
fbshipit-source-id: afabdc97a
Summary:
The analysis call graph is the call graph from the perspective of the analyses run in infer
This commit creates the reverse analysis call graph to be used for incremental diff analysis
Reviewed By: ezgicicek
Differential Revision: D16335938
fbshipit-source-id: 0cbab3298
Summary: The reverse call graph will be constructed by adding edges one-by-one, so expose functionality in CallGraph to add a single edge to the graph
Reviewed By: jvillard
Differential Revision: D16285016
fbshipit-source-id: 553fe1ecf
Summary:
Add a function to delete a summary from disk and caches
This is needed so that summaries corresponding to invalidated procedures can be removed (as part of incremental diff analysis)
Reviewed By: ngorogiannis
Differential Revision: D16332752
fbshipit-source-id: 7d3c7a121
Summary:
The genrule-capture integration with Java relies on a buck config flag `infer.infer_bin=<path to infer>` (see test changes in `DEFS` below).
In a CI environment where the infer binary is checked out under a random directory, this means that the buck genrule is keyed by a random string (the path to infer), and this defeats caching.
Switch to the following contract: the genrule target does not expect a config flag at all. Instead it runs whichever `infer` binary is in the path. To make sure the binary is the same one with the originator, the capture integration runs buck under a modified `PATH` where the originator `infer` is sure to be the first matching entry.
NB cache invalidation is still OK because we rely on `infer.version` buck config flag, which will be hashed into the rulekey.
Reviewed By: jvillard
Differential Revision: D16332696
fbshipit-source-id: 2975d5c26
Summary: The method defined in the interface didn't match the implementation. Caught by ulyssesr.
Differential Revision: D16339179
fbshipit-source-id: 9cbb1dc74
Summary:
Write a function to read in the summaries from the `.specs` folder
This is needed so the reverse analysis call graph can be constructed from the summaries
Reviewed By: ngorogiannis
Differential Revision: D16282333
fbshipit-source-id: 101ce2c5b
Summary:
This javalib release gives compatibility with java 9 modules.
It should also remove some Infer warnings (when a class has no superclass)
JFile.sep is now a char
Reviewed By: jvillard
Differential Revision: D16220583
fbshipit-source-id: 5d05afde0
Summary:
When a file is passed to infer through `--changed-files-index` which is
- an absolute path
- the file does not exist
Then the code fails throwing an exception in the function below while trying to relativise the absolute path.
The behaviour on relative paths is to skip missing files, and does not fail because Infer does not attempt to relativise them.
Swallow the exception and skip the file; and so unify the behaviour across relative and absolute paths.
Reviewed By: mityal
Differential Revision: D16279672
fbshipit-source-id: 33b468da7
Summary:
Move the logic that is general to any call graph from SyntacticCallGraph.ml into CallGraph.ml
This will allow the call graph logic to be re-used in a later diff
Reviewed By: ezgicicek
Differential Revision: D16265150
fbshipit-source-id: 10a067f28
Summary:
This sometimes fail in our CI, eg:
```
[*ERROR**][66148] file has vanished: "/data/sandcastle/boxes/trunk-git-infer/infer/tests/build_systems/utf8_in_pwd/../codetoanalyze/make/utf8_in_function_names-617be4bc.o.tmp"
```
The issue seems to be that we are too greedy and try and copy files that may
disappear. This diff makes the list of files to copy over explicit to exclude
such temporary files.
Reviewed By: artempyanykh
Differential Revision: D16261872
fbshipit-source-id: 2b080d27a
Summary:
Add a flag to enable incremental diff analysis, where old summaries are not recomputed unless necessary
The implementation for this flag will follow
Reviewed By: ngorogiannis
Differential Revision: D16222865
fbshipit-source-id: e7e225a87
Summary:
newer is better, right?
All the code changes in infer are because of core being bumped to v0.12.
Reviewed By: jberdine
Differential Revision: D16223183
fbshipit-source-id: f3c339966
Summary:
A common gotcha is the new test. Model the minimum amount of
`std::basic_string` to catch it.
Reviewed By: mbouaziz, ngorogiannis
Differential Revision: D16121090
fbshipit-source-id: 66f06cb43
Summary:
Be more flexible in what type of function calls are allowed in `ViaCall ...` actions to be able to include models.
Also get rid of `here here` in traces /o\
As a side-effect, get more precise (=qualified) procedure names in
traces (but not in messages so as not to be too verbose).
Reviewed By: mbouaziz, ngorogiannis
Differential Revision: D16121092
fbshipit-source-id: fb51b02f8
Summary:
The domain supported path sensitivity wrt to a specific boolean guard `Branch.unlikely`. This isn't used in actual code, so remove it.
Also
- add an .mli to the domain;
- unabbreviate domain name to match analyser name;
- use Payload.read instead of calling Ondemand directly;
- adjust tests.
Reviewed By: mbouaziz
Differential Revision: D16203953
fbshipit-source-id: 743aa4400
Summary:
`CallGraph.ml` computes a call graph using the explicit procedure calls in the source code (ie computes a syntactic call graph)
I am going to be adding code for an 'analysis call graph' that gives the callees of a procedure from the perspective of the analyses in infer
This diff renames `CallGraph.ml` to avoid confusion with the new analysis call graph logic
Reviewed By: ngorogiannis, jvillard
Differential Revision: D16204436
fbshipit-source-id: 67bed8e28
Summary: This function is suspected to be slow, let's take a look at realtime distribution
Reviewed By: ngorogiannis
Differential Revision: D16221864
fbshipit-source-id: 2698602a9
Summary:
Move annotation reachability tests to their own directory.
Clean up and complete the tests.
Reviewed By: jvillard
Differential Revision: D16201387
fbshipit-source-id: 8a87a25b7
Summary:
Treat `MainThread` and `WorkerThread` annotations.
Fix wrong test (`AnyThread` cannot call a UI-only method, because it can be called by ANY thread ;) ) See https://developer.android.com/reference/android/support/annotation/AnyThread
Clean up the code a bit.
Reviewed By: jvillard
Differential Revision: D16183798
fbshipit-source-id: 6b7e3b27e
Summary:
This probably never matters because what kind of function would get > 1000 specs?
Anyhow, this way we can all sleep better at night.
Reviewed By: mbouaziz
Differential Revision: D16202186
fbshipit-source-id: b3294b712
Summary:
- Change the method `Ondemand.analyze_proc_name` so that `caller_summary` is not optional
- Introduce a new method `analyze_proc_name_no_caller` to replace `analyze_proc_name` when there is no caller
Reviewed By: ngorogiannis
Differential Revision: D16183378
fbshipit-source-id: c0c67f869
Summary: Refactor the methods `analyze_proc_desc` and `analyze_proc_name` in `ondemand.ml` so that they no longer share code
Reviewed By: ngorogiannis
Differential Revision: D16182733
fbshipit-source-id: 5aee03092
Summary: Register the callees of a procedure in the set `Summary.callee_pnames`
Reviewed By: ngorogiannis
Differential Revision: D16165016
fbshipit-source-id: 364aa948c
Summary:
Store a set callee names (`Typ.Procname.Set`) in the summary of a procedure
This will allow a call graph to be constructed showing the dependencies between procedures from the perspective of the analyses
Reviewed By: ngorogiannis
Differential Revision: D16148907
fbshipit-source-id: ab6f5d616
Summary:
The fields `tenv` and `integer_type_widths` can be obtained from the `exe_env` field of `proc_callback_args`
This commit removes the redundant fields
Reviewed By: ngorogiannis
Differential Revision: D16149520
fbshipit-source-id: d37526fd4
Summary:
Supply the caller `Summary.t` to `Ondemand.analyze_proc_name` and `Ondemand.analyze_proc_desc` instead of the caller `Procdesc.t`
This change will enable a later commit to record the procedures that are called by a procedure in its summary
Reviewed By: ngorogiannis
Differential Revision: D16148677
fbshipit-source-id: cf353e89a
Summary:
Cluster checkers call `SummaryPayload.read` but set the `caller_summary` to correspond to the same summary as gives the `callee_pname`
This change introduces a new method `read_toplevel_procedure` that does not require a `caller_summary`, to be used by the cluster checkers
Reviewed By: ngorogiannis
Differential Revision: D16131660
fbshipit-source-id: 12caa1000
Summary: There were FNs caused by only looking for the immediate predecessors when we were checking the pattern. This diff heuristically chases 4 more predecessors to reduce the number of FNs.
Reviewed By: ngorogiannis
Differential Revision: D16149983
fbshipit-source-id: f65c57a0a
Summary: Adding typechecks to prevent potential FPs like the added test
Reviewed By: ngorogiannis
Differential Revision: D16149511
fbshipit-source-id: 6d3fe0ad4
Summary:
Change the datatype `ProcData` to include a field of type `Summary.t` instead of a field of type `Procdesc.t`
This will enable a later commit to supply a summary to `Ondemand.analyze_proc_desc` and `Ondemand.analyze_proc_name`
Reviewed By: ngorogiannis
Differential Revision: D16121405
fbshipit-source-id: 342374121
Summary:
`proc_desc` is an argument to the function `iterate_procedure_callbacks` in `callbacks.ml` but can always be obtained from another argument (`summary`)
This commit removes the redundant argument
Reviewed By: ngorogiannis
Differential Revision: D16107332
fbshipit-source-id: 21c21921e
Summary:
The record `proc_callback_args` (defined in `callbacks.ml`) contains the fields `proc_desc` and `summary`.
The field `proc_desc` is redundant because it can be obtained from `summary`.
This diff removes `proc_desc` and uses the summary to obtain it where needed.
Reviewed By: ngorogiannis
Differential Revision: D16090783
fbshipit-source-id: 5632d1f4a
Summary:
Replaced by pulse. `--ownership` is now a deprecated form of `--pulse`.
The ownership checker is starting to give wrong answers due to changes in the
clang frontend, so it's better to remove it in favour of pulse.
there_goes_my_hero
Reviewed By: ngorogiannis
Differential Revision: D16107650
fbshipit-source-id: bb2446a19
Summary: Refactor `ondemand.ml` so that the function `analyze_proc` does not need to be passed around as a function argument
Reviewed By: ngorogiannis, jvillard
Differential Revision: D16089689
fbshipit-source-id: 97ba07619
Summary:
javalib 3.0 adds more support for lambdas and instance methods in interfaces.
Java constant type has 2 more constructors. We don't handle them when
generating SIL (as before) but at least we are compatible with
javalib 3.0
Reviewed By: jvillard
Differential Revision: D16030479
fbshipit-source-id: 0b1508482
Summary:
So it turns out we need to translate even more cases. Pulse had a FP
before that this fixes.
Reviewed By: ezgicicek
Differential Revision: D16073629
fbshipit-source-id: c03460b5a
Summary:
This is needed to test some functionality in the next diff. Only one
test changes (no longer a FN), which is now documented. Also, stop
including the "header models" meant for biabduction!
Maybe one day we'll need to have several test modes for different C++
versions. Seems overkill for now, so let's wait until we see some actual
issues (eg FPs) that manifest in one version but not the other.
Reviewed By: mbouaziz
Differential Revision: D16073630
fbshipit-source-id: 1cfdfc933
Summary:
Previously it was required to provide SDKROOT during configure on Mojave
hosts to `make` the project which in scripts was messing up local clang
and somewhat error-prone. Instead we could use xcrun to find required SDK
paths automatically.
Reviewed By: jvillard
Differential Revision: D16072354
fbshipit-source-id: 93cbf3980
Summary:
Move control of the number of remaining task from the taskbar [1] to each task generator [2]. This means that the call graph scheduler can count all procedures in mutually-recursive cycles as dealt with when only those procedures are left.
[1] : `infer/src/base/TaskBar.ml`
[2] : type defined in `/infer/src/base/ProcessPool.ml`
Reviewed By: ngorogiannis
Differential Revision: D16071497
fbshipit-source-id: aa9436638
Summary: Could be made better for cycles but not used and not unit tested, let's remove it.
Reviewed By: ngorogiannis
Differential Revision: D16017744
fbshipit-source-id: 6f7ae95c1
Summary: Do not fail on cycles, normalize values issuing from cycles, but do not try to recognize equal cycles like `let rec x = 1 :: x` and `let rec y = 1 :: 1 :: y`. This is unlikely to happen in our code.
Reviewed By: ngorogiannis
Differential Revision: D16017365
fbshipit-source-id: 691bb756c
Summary:
Sometimes the post of a function call has attributes on addresses that
were mentioned in the pre but are no longer reachable in the post. We
don't want to forget these, see added test.
Reviewed By: mbouaziz
Differential Revision: D16050050
fbshipit-source-id: 1ce522b97
Summary:
Previously we would union them with the previous attributes. I don't
think that makes sense.
Also change the interface a bit in preparation for the next commit.
Reviewed By: mbouaziz
Differential Revision: D16050051
fbshipit-source-id: 2e8f88f4e
Summary:
Noticed that:
- some option was always `Some _`
- recording the post never raises `Aliasing` (only exploring the pre does)
- a mutual recursion was unused
Reviewed By: mbouaziz
Differential Revision: D16050052
fbshipit-source-id: 7f77aae08
Summary:
Currently, `Callbacks.analyze_procedures` creates a function to call the method `Callbacks.iterate_procedure_callbacks`. This is supplied as an argument to functions in `ondemand.ml`, so that it can be invoked. This is done to avoid a cyclic dependancy.
This diff moves the functions that `ondemand.ml` needs to call into `ondemand.ml`, avoiding the need to supply them as arguments.
Reviewed By: ngorogiannis
Differential Revision: D16028836
fbshipit-source-id: 16ae27a3e
Summary:
The previous code would call the destructor for the C++ temporary
*before* the prune nodes, which then try to dereference it. Wrong.
Quick fix: don't destroy temporaries in conditionals.
Reviewed By: mbouaziz
Differential Revision: D16030735
fbshipit-source-id: e11abad58
Summary:
Similar to D16005395: `folly::Optional` has a boolean field to know if
it needs to destroy the wrapped object and pulse ignores that
completely, causing false positives each time an `Optional` is created
around something with a non-trivial destructor.
Reviewed By: mbouaziz
Differential Revision: D16030149
fbshipit-source-id: aeed4a0b3
Summary:
We were skipping some instructions before and that was a problem for
pulse. See added pulse test.
Reviewed By: mbouaziz
Differential Revision: D16030150
fbshipit-source-id: 9c62e6213
Summary: Not sure if anyone uses this but there, now it's modelled.
Reviewed By: mbouaziz
Differential Revision: D16008162
fbshipit-source-id: f4795dcba
Summary:
Prevent false positives about variables captured by value gone out of
scope.
Reviewed By: ezgicicek
Differential Revision: D16008165
fbshipit-source-id: d70e47db4
Summary: We know how to do interprocedural calls so let's use that!
Reviewed By: mbouaziz
Differential Revision: D16008164
fbshipit-source-id: 4c34bf704
Summary:
`function::operator=` is called whenever we assign a literal lambda to a
variable, so it's pretty useful to be able to report anything on
lambdas.
Reviewed By: mbouaziz
Differential Revision: D16008163
fbshipit-source-id: a9d07668d
Summary:
The previous version had a potentially exponential behavior on values with already lots of sharing.
This is fixed here at the price of a multiplicative constant factor (cost of `Hashtbl.hash`).
It also prepares for the handling of cycles.
Reviewed By: ngorogiannis
Differential Revision: D16016906
fbshipit-source-id: 611287917
Summary:
In light of Pulse's misadventures with HIL, leave a warning for future
checkers writers. Comment mostly taken from summary of D15824961.
Reviewed By: ngorogiannis
Differential Revision: D16005392
fbshipit-source-id: 805f17584
Summary:
This can take a minute or so during which the user would have no idea
what infer is doing.
Reviewed By: ngorogiannis
Differential Revision: D16005393
fbshipit-source-id: 586812527
Summary:
No need to hide the real reason for the crash behind another crash when
trying to print the error message.
Reviewed By: mbouaziz, ngorogiannis
Differential Revision: D16005394
fbshipit-source-id: dc3d9437e
Summary:
The constructor of `folly::SocketAddress` conditionally deletes some
object and then makes that condition false. The destructor then does the
same. Pulse ignores conditionals so will see a double delete.
Just skip that function for now, but it should be easy for pulse to be
more correct here if it knew how to compare constant values.
Reviewed By: mbouaziz
Differential Revision: D16005395
fbshipit-source-id: 036f5091b
Summary:
Printing `Exp.Const (Cfun proc_name)` adds `_fun_` in front of the
procedure name, eg `_fun_foo` instead of `foo`. This showed up in pulse
traces.
Reviewed By: mbouaziz
Differential Revision: D16004606
fbshipit-source-id: 72ac6866f
Summary:
Fixes a false positive where the address of a C++ temporary is bound to
a static const reference variable then returned. The fix doesn't try to
establish that the variable is a const reference so could lead to false
negatives but that can be addressed later.
Reviewed By: ezgicicek
Differential Revision: D16004538
fbshipit-source-id: e403dbefe
Summary:
Replace Hashtbl.clear with Hashtbl.reset
This saves memory because the reset method shrinks the hash-table, whereas the clear method just empties it
Reviewed By: jvillard
Differential Revision: D16004966
fbshipit-source-id: f32b00b0f
Summary:
[apologies for the unreviewable diff...]
Get rid of HIL expressions in pulse. This finishes the HIL -> SIL
migration. The first step made pulse start from SIL instructions but
would translate most accesses to HIL to re-use most of the existing
pulse code. This diff gets rid of the intermediate translation of SIL
expressions to HIL expressions.
Big changes:
1. `PulseOperations` mostly rewritten, driven by using `Exp.t` instead of `HilExp.AccessExpression.t` for everything.
2. Stop trying to reverse-engineer what addresses mean in terms of
access paths from program variables. Rely on the trace pointing at
the right places in the code to be enough. This is because it wasn't
that useful (and could even be misleading when wrong) but could be
prohibitively expensive in degenerate cases (eg nodes with tens of
thousands of successive array accesses...)
3. `PulseAbductiveDomain.apply_post` now returns the computed return
value instead of recording it itself.
4. Change of vocabulary: `materialize` -> `eval`, `crumb` -> `event`
5. Function calls arguments are now evaluated prior to doing anything
else, which saves everything else from having to (remember to) do
that. In particular, this changes how models look quite a bit.
Reviewed By: mbouaziz
Differential Revision: D15986373
fbshipit-source-id: 1d79935de
Summary:
Passing an absolute project path as buck config flag makes buck caching almost impossible for infer artefacts, since on every host/run that directory can be different.
Eliminate that and rely on shell commands to find the project root, executed within the genrule.
Reviewed By: jvillard
Differential Revision: D15963807
fbshipit-source-id: b6e590029
Summary:
Some functions exposed in ScubaLogging interface were not
used outside of ScubaLogging and caused deadcode to fail.
Reviewed By: ngorogiannis
Differential Revision: D15964204
fbshipit-source-id: d823dbf8b
Summary:
Reduces the size of the `tenv` by sharing values as most as possible, in an untyped - but supposedly safe - way, by using black magic on objects.
Can be reused for other things later.
Reviewed By: ngorogiannis
Differential Revision: D15855870
fbshipit-source-id: 169a4b86b
Summary:
Using `Marshal.to_string` to create SQLite values used in comparisons is brittle as there is no guarantee that it will return the same value for structurally equal values.
When adding sharing, this will definitely break.
From the SQLite queries I found, only `SourceFile` and `Procname` are used in comparisons.
I haven't tested performance.
It shouldn't change anything for `SourceFile` as there is no possible sharing.
It shouldn't change much for `Procname` as they are pretty small anyway.
Reviewed By: ngorogiannis
Differential Revision: D15923122
fbshipit-source-id: ce4af1fe3
Summary: Inject destructor calls to destroy a temporary when its lifetime ends.
Reviewed By: mbouaziz
Differential Revision: D15674209
fbshipit-source-id: 0f783a906
Summary:
Now that HIL doesn't help us anymore we need to reconstruct its mapping
"SIL logical var -> program access path". We already have everything we
need in pulse: it suffices to walk the current memory graph starting
from program variables until we find the value of the temporary we are
interested in.
This diff also builds some type machinery to make sure all accesses are
explained.
Reviewed By: mbouaziz
Differential Revision: D15824959
fbshipit-source-id: 722c81b39
Summary:
It turns out HIL gets in the way of a precise heap analysis. For
instance, instead of:
```
n$0 = *&x.f
_ = delete(&x)
*&y = n$0
```
HIL tries hard to forget about intermediate variables and shows instead
```
_ = delete(&x)
*&y = *&x.f
```
Oops, that's a use-after-delete, whereas the original code was safe.
While it's easy to write SIL programs that are completely unsound for
HIL, they are not generated very often from the frontends. In fact, the
problem became apparent only when making the clang frontend translate
C++ temporaries destructors, which produces the situation above
routinely.
This diff makes the minimal amount of change to make Pulse build and
produce equivalent results (minus HIL bugs) starting from SIL instead of
HIL. The reporting sucks for now because we need to translate SIL
temporaries back into program access paths. This is done in the next
diff.
Reviewed By: mbouaziz
Differential Revision: D15824961
fbshipit-source-id: 8e4e2a3ed
Summary:
Just moving code around.
This is needed later to make some types in `PulseTrace` depend on
a new that I'll have to define in `PulseDomain`.
Also, this gives better names all around I think
Reviewed By: mbouaziz
Differential Revision: D15881281
fbshipit-source-id: e86c1472e
Summary:
Just moving code around.
This is needed later to make some types in `PulseInvalidation` depend on
a new type that I'll have to define in `PulseDomain`.
Reviewed By: mbouaziz
Differential Revision: D15824962
fbshipit-source-id: 86cba2bfb
Summary:
Make it possible to re-use the graph visitor to compute all sorts of
things with a flexible API where you can pass a function that folds over
all addresses reachable from certain stack variables (specified with a
filter) and gets passed the access path that leads to each address.
This is used in later commits.
Reviewed By: mbouaziz
Differential Revision: D15824960
fbshipit-source-id: c424a71cb
Summary: Preanalysis is performed at the frontend now. Hence, we don't need to repeatedly check/set when/if it is performed.
Reviewed By: mbouaziz
Differential Revision: D15863175
fbshipit-source-id: f9c6b7ae1
Summary:
One "interesting" feature of the approach of merging the captured targets in Java, is that we union their type environments, as opposed to store partial tenvs together with each source file, which is the case for Clang.
This means
- the final global type environment is potentially huge because it contains all the types in all targets.
- all analysis workers start by loading that tenv in memory, meaning we consume `|size of tenv| x #cpus` memory, which can tip the balance towards OOMs
This diff attempts to economise on global tenv size. This is done by increasing sharing which is then preserved by marshalling. It's done in a brute force way, with hashtables for each struct component, and is not fully effective due to the recursion amongst types and types names, as well types appearing inside other constructs such as procnames.
This is done when calling `Tenv.store` so that
- the computation can be parallelised somewhat (capture is parallel, merging is not)
- buck caching will benefit from smaller tenvs.
This saves about 24% of total memory devoted to the type environment.
Reviewed By: mbouaziz
Differential Revision: D15840054
fbshipit-source-id: 6f03be1a4
Summary:
- Add allocation costs to `costs-report.json` and enable diffing over allocation costs.
- Also, let's be more consistent and modular in naming our cost issues.
- introduce a generic issue type `X_TIME_COMPLEXITY_INCREASE` where `X` can be one of the cost kinds. If the function is on the cold start, issue can have the `COLD_START` suffix. Similarly for infinite/zero/expensive calls.
- Change `PERFORMANCE_VARIATION` -> `EXECUTION_TIME_COMPLEXITY_INCREASE`
- Add new issue type for `ALLOCATION_COMPLEXITY_INCREASE_COLD_START` which will be enabled by default
- Refactor cost issues to be more modular and succinct. This also makes addition of a new cost kind very easy by adding the kind into the `enabled_cost_kinds` list in `CostKind.ml`
Reviewed By: mbouaziz
Differential Revision: D15822681
fbshipit-source-id: cf89ece59
Summary:
This one isn't caught because we don't destruct temporaries that are
bound to a const reference. According to the C++ standard these should
get destroyed when the const reference gets destroyed but instead we
just don't destroy them for now.
Reviewed By: mbouaziz
Differential Revision: D15760209
fbshipit-source-id: 32c935ec0
Summary:
In a next diff temporaries will get destructed at the end of their
lifetimes and that naive model would be causing false positives.
The flipside is that we lose all reports on closures for now, will need
to model them separately later.
Reviewed By: mbouaziz
Differential Revision: D15695943
fbshipit-source-id: c2c482c02
Summary:
Needed for next diff: we'll need to do 2 passes on the AST to collect
the temporaries to destroy at the end of an `ExprWithCleanups`, but the
SIL names of these temporaries are generated freshly on the fly so they
would get different names if we do it naively.
This adds a hashmap to the translation context so the temporary
corresponding to a given `MaterializeTemporyExpr` is only generated once
and then reused.
Reviewed By: mbouaziz
Differential Revision: D15674212
fbshipit-source-id: 0e16062d9
Summary:
This started as an attempt to understand how to modify the frontend to
inject destructors for C++ temporaries (see next diffs).
This diff rewrites the existing logic for computing the list of
variables that should be destroyed at the end of each statement, either
because it's the end of their syntactic scope or because control flow
branches outside of their syntactic scope.
The frontend translates a function from the last instructions to the
first, but scope computation needs to be done in the other direction, so
it's done in a separate pass *before* the main translation happens. That
first pass creates a map from statements in the AST to the list of
variables that should be destroyed at the end of these statements. This
is still the case now.
Before, that map would be computed in a bit of a weird way: scopes are
naturally a stack but instead of that the structure maintained was a
flat list + a counter to know where the current scope ended in that
list.
In this diff, redo the computation maintaining a stack of scopes
instead, which is a bit cleaner. Also treat more instructions as
introducing a new scope, eg if, for, ...
Reviewed By: mbouaziz
Differential Revision: D15674208
fbshipit-source-id: c92429e82
Summary:
Somewhat trivial: add a string to "Destruction" nodes to indicate why
they were created. Rename the main `instruction_aux` function into
`instruction_translate` (see next diff for why).
Reviewed By: mbouaziz
Differential Revision: D15674211
fbshipit-source-id: 8a7eda72c
Summary:
I rewrote the test so it doesn't need any C++ headers so that:
- it's easier to see what's going on
- it's easier to debug: the whole AST is now somewhat readable vs before
the headers made it impossibly long
Reviewed By: ezgicicek
Differential Revision: D15674213
fbshipit-source-id: d98941983
Summary: This allows to match `foo<int_&>` and many other horrible names.
Reviewed By: mbouaziz
Differential Revision: D15825403
fbshipit-source-id: c892033aa
Summary:
I realized that there was a discrepancy in the # of instructions between whether we run a single analysis or multiple analyses at the same time. It turns out that in biabduction, bufferoverrun and other HIL analyses we did Preanalysis step (which adds scope instructions and invokes liveness etc.) but not in others. This discrepancy results in inconsistent analysis results (e.g. in the new inefficient-keyset-iterator) that rely on instructions. We should be consistent. Hence, we now invoke Preanalysis in the frontend and remove all other uses in the rest of the checkers.
Consequently, I had to update the inefficient-keyset-checker to take the CFG resulting from Preanalysis with extra scoping instructions.
Reviewed By: mbouaziz, ngorogiannis, jvillard
Differential Revision: D15803492
fbshipit-source-id: 4e21eb610
Summary:
This is a simple checker that identifies inefficient uses of `keySet` iterator where (not only the key but also) the value is accessed via `get(key)`. It is more efficient to use `entrySet` iterator which already returns both key-value pairs. This optimization would get rid of many extra lookups which can be expensive.
We simply traverse the CFG starting from the loop head upwards and pick up the map that is iterated over. Then, we check in the loop nodes if there is a call to `get(...)` over this map. If, so we report.
Reviewed By: ngorogiannis
Differential Revision: D15737779
fbshipit-source-id: 702465b4e
Summary:
Move genrule capture integration logic from shell to OCaml.
Also, stop relying on side-effects of buck compilation for constructing the infer-deps.txt file used for merging. Now this is obtained by passing `--show-output` to buck, which spits out the `buck-out` output paths to the targets we asked to build.
Reviewed By: ezgicicek
Differential Revision: D15715608
fbshipit-source-id: 8fa896ba6
Summary:
The synthetic methods from `topl.Property` are now nonempty: they
simulate a nondeterministic automaton.
Reviewed By: jvillard
Differential Revision: D15668471
fbshipit-source-id: 050408283
Summary:
Instrument SIL according to TOPL properties. Roughly, the
instrumentation is a set of calls into procedures that simulate a
nondeterministic automaton. For now, those procedures are NOP dummies.
Reviewed By: jvillard
Differential Revision: D15063942
fbshipit-source-id: d22c2f6fa
Summary:
When multiple buck java tests use the same `buck-out` they sometimes fail. This isn't surprising, as they presumably clobber each other's output when running on the same files.
Since there is no reason to have this global, shared buck repo, create one for each test, inside the test directory. Also, clean up the Makefiles a bit -- they provide bogus compile targets, for example, and have mostly wrong source dependencies.
That done, remove the `testlock` crutch which enforces mutual exclusion between tests, from the buck/java tests.
I do not understand why the buck clang tests can share the global repo without failure, but there you go.
Reviewed By: jvillard
Differential Revision: D15579133
fbshipit-source-id: 7eff79173
Summary: Not sure how that happens but it does. Instead of crashing, log the error and continue.
Reviewed By: martintrojer
Differential Revision: D15660008
fbshipit-source-id: c87e724d4
Summary: The previous commit broke the `--foo arg` case because it matched `--foo` in the case looking for `--foo=`.
Reviewed By: mbouaziz
Differential Revision: D15670472
fbshipit-source-id: ab81c7357
Summary: There's currently no way to skip these when they are passed to clang.
Reviewed By: martintrojer
Differential Revision: D15669132
fbshipit-source-id: be97d2638
Summary:
It is unsafe to call protocol methods defined optional. Before calling them we should check it
the implementation exists by calling
`if ([object respondsToSelector:selector(...)]) ...`
Without the above check we get run time crashes.
Reviewed By: jvillard
Differential Revision: D15554951
fbshipit-source-id: f0560971b
Summary: In its new form it actually tests that infer takes the correct branch.
Reviewed By: mbouaziz
Differential Revision: D15494297
fbshipit-source-id: 7b9bb8f75
Summary:
- take advantage more structured attributes in the exported AST
- circumvent new format of `if` and `switch`
- a few new features/nodes but nothing major there
update-submodule: facebook-clang-plugins
Reviewed By: mbouaziz, martintrojer
Differential Revision: D15453572
fbshipit-source-id: c0c24345f
Summary:
Somehow clang now chooses slightly different arguments to pass to `ld`
in the invocation that `ndk-build` makes to link:
```
--- clang7 2019-05-28 07:47:19.214949009 -0700
+++ clang8 2019-05-28 07:46:55.095924374 -0700
@@ -1,6 +1,15 @@
"/opt/android_ndk/r15c/toolchains/aarch64-linux-android-4.9/prebuilt/linux-x86_64/lib/gcc/aarch64-linux-android/4.9.x/../../../../aarch64-linux-android/bin/ld"
"--sysroot=/opt/android_ndk/r15c/platforms/android-21/arch-arm64"
+"-EL"
"--fix-cortex-a53-843419"
+"-z"
+"now"
+"-z"
+"relro"
+"-z"
+"max-page-size=4096"
+"--hash-style=gnu"
+"--hash-style=both"
"--no-add-needed"
"--enable-new-dtags"
"--eh-frame-hdr"
@@ -32,7 +41,7 @@
"--fatal-warnings"
"-lc"
"-lm"
-"-lstdc++"
+"-lc++"
"-lm"
"-lgcc"
"-ldl"
```
In particular:
- `lc++` results in `libc++.so` not found from the toolchain
- the forced relocation `-z relro` fails with "/..//bin/ld: ./obj/local/arm64-v8a/objs/hello/__/hello.o: Relocations in generic ELF (EM: 183)" and other weirder errors
Somehow pretending the C++ compiler is `clang` instead of `clang++` stops the insanity.
Also add an Application.mk file to specify some sane defaults.
Also add `V=1` to the `ndk-build` invocation in our tests so that when it fails we have a bit more to work with.
Reviewed By: mbouaziz, martintrojer
Differential Revision: D15518447
fbshipit-source-id: 40203814b
Summary:
- Rename `invariantModels` to `purityModels`
- Track which arguments are modified in purity models. Before we were invalidating all arguments of impure modeled functions. Instead, now we only invalidate modified args given in the model. This should ideally result in more precision in the analysis.
- Add some more purity models for :`cast`, `new`, `new_array` and `Math.random`
Reviewed By: mbouaziz
Differential Revision: D15535332
fbshipit-source-id: 5395800d9
Summary:
That test wasn't hooked up to `make test` and so regressed at some
unknown time in the past. Just recording the new state of things for
now.
Reviewed By: ngorogiannis
Differential Revision: D15495234
fbshipit-source-id: 14fb112de
Summary:
Infer was complaining about a parameter not null checked, which was failing the
model compilation since no errors are allowed on models.
Reviewed By: ezgicicek
Differential Revision: D15453573
fbshipit-source-id: 3bd0df715
Summary:
`infer_events` table is a key-value storage that also have list of fields common for entire infer run.
Infer should be agnostic of many of such fields (e.g. diff number).
Hence we will pass such extra fields through CI.
Note that only "normals" (strings in scuba terminology) are currently supported.
Reason being: most of things that are technically ints (like IDs) should actually be normals (because average etc does not make sense for them; and group by, in contrast, does).
Reviewed By: jvillard
Differential Revision: D15376636
fbshipit-source-id: 729eaabfc
Summary: There can be A LOT of procedures -- currently we log two lines (started/done) for each one, when doing call graph scheduling. This leads to ridiculously long log files. Switch to only log these messages in the log file and only if we are verbose logging.
Reviewed By: jvillard
Differential Revision: D15413330
fbshipit-source-id: 6e26693e8
Summary:
Thanks to the newly added `StarField`, path length is better controlled before ondemand is used.
Hence there is no need to (unsoundly) canonicalize paths then anymore.
Reviewed By: ezgicicek
Differential Revision: D15409716
fbshipit-source-id: 9ea7b4717
Summary:
This messes with the deduplication heuristic when templated function
names show up in the error messages, since the heuristic demands that
the error messages are the same.
Reviewed By: mbouaziz
Differential Revision: D15374333
fbshipit-source-id: 70232d254
Summary:
Improve the error messages, change is more or less documented in the
code.
Reviewed By: mbouaziz
Differential Revision: D15374334
fbshipit-source-id: f1dd54180
Summary:
Some edge case involving casting field pointers to the structure type itself generated arbitrarily long paths when used in a loop.
Without changing the widening, this diff avoids repetitions of fields in paths by abstracting them with a star.
E.g. `x.a.b.c.b` will become `x.a.b.c*.b`, and so will `x.a.b.c.a.b`, `x.a.b.c.c.b`, or `x.a.b.c.b.b`.
Reviewed By: ngorogiannis
Differential Revision: D15352143
fbshipit-source-id: 5ea426c5e
Summary:
I was wondering what were the empty sessions and why inferbo was running twice.
Answer: the empty sessions were 'compute pre' and the second run of inferbo was the narrowing phase.
Reviewed By: ngorogiannis
Differential Revision: D15378138
fbshipit-source-id: 507a3df42
Summary:
This was hardcoded to `true` and its purpose is unclear to me. I kill
what confuses me.
Reviewed By: jeremydubreil
Differential Revision: D15294783
fbshipit-source-id: 3c1c469ee
Summary:
- Makes sure that `start_session` and `finish_session` are well parenthesized
- Avoids a try finally when debug is disabled
Reviewed By: ngorogiannis
Differential Revision: D15371841
fbshipit-source-id: 340203edb
Summary:
Before: the trace would explain how a value was invalidated and
accessed, but not how the value that was invalidated had been
constructed.
Now: `PulseTrace.t` records breadcrumbs of how the value was constructed
in addition to the interproc "action" trace leading to the invalidation
or access action.
Concretely:
```
void bad(X &x) {
X *y = x;
X *z = x;
delete y;
access(z);
}
```
will produce the trace:
Invalidation part:
y = x
delete y
Access part:
z = x
access(z)
access to z->f inside of access(z)
Before this diff the "Access part" would be missing the "z = x" part of
the trace, so it might be confusing why `z` has anything to do with `y`.
However, such "breadcrumbs" are not recorded in the inter-procedural
part, only the sequence of calls is. This is a trade-off for simplicity,
maybe it's enough for developers maybe it isn't, we'll find out later.
Reviewed By: jberdine
Differential Revision: D15354438
fbshipit-source-id: 8d0aed717
Summary:
In preparation for the next diff that re-uses `PulseTrace.t` for a type
that combines breadcrumbs + action.
No change intended.
Reviewed By: mbouaziz, jberdine
Differential Revision: D15354437
fbshipit-source-id: cbb8757b4
Summary:
Before: no links to procedure summary and nodes in header file debug html
Now: some or all of them if you are lucky enough
Reviewed By: jvillard
Differential Revision: D15279379
fbshipit-source-id: a145f9e66
Summary:
Before: they are written only when the file is fully analyzed.
Now: a first version is written as soon as the file gets analyzed so that we get links to nodes, the final version overwrites it
Reviewed By: jvillard
Differential Revision: D15279351
fbshipit-source-id: a3120aa31
Summary:
update-submodule: facebook-clang-plugins
We used to translate `offsetof` by an unknown value.
This fixes it. It is now translated like an integer literal.
Reviewed By: ddino
Differential Revision: D15317799
fbshipit-source-id: ae89e0ec5
Summary:
API and stub implementation for real-time logging capabilities.
Low-level implementation requires interaction with FB-specific deployment of Scribe, hence it is stubbed out.
Reviewed By: jberdine
Differential Revision: D15259559
fbshipit-source-id: 712cb99e1
Summary:
Enabling starvation by default (D15158597) makes infer double report racerd
issues in these tests. The reason seems to be that both racerd and starvation
use `IssueLog` to record issues, so racerd records its issues there (using side
effects), then starvation adds its own (empty) set of issues and reports
whatever is there again. Since nothing cleans up the IssueLog in the middle,
racerd issues get reported twice: once as racerd issues and the other as
starvation issues.
Let's fix this later, for now just unbreak the test itself.
Reviewed By: mbouaziz, ngorogiannis
Differential Revision: D15277552
fbshipit-source-id: 3e7be8795
Summary: Previously there was no way of getting that list from the manual.
Reviewed By: jeremydubreil
Differential Revision: D15158598
fbshipit-source-id: 1705ed59d
Summary:
A more dynamic scheduling scheme will potentially run into the situation where no new work packets can be scheduled, but more work will be possible to schedule in the future, perhaps when some dependent work packet finishes being analysed.
The current implementation prevents that, as it expects that if a worker goes idle, it stays idle.
The changes here address this in two parts:
- the `select` call is always given a finite timeout. If given an infinite timeout, we will not be able to poll the task generator for more work, where none were previously possible.
- when the `select` call times out without updates, check if there is an idle child, and if so if the task generator has more work right now.
See also ProcessPool.mli for comments.
Reviewed By: mbouaziz
Differential Revision: D15197749
fbshipit-source-id: babe5da8e
Summary:
Before moving to any kind of non-trivial scheduling, we need to change the Tasks interface.
In particular, it's too restrictive to expect that the tasks to be scheduled are provided as a list before starting execution. For example, dynamic scheduling does not fit the bill here. Also, the list expectation means all scheduling work has to be done up front.
The solution here is to move to a `Sequence`-like interface with one difference:
- The function returning the next task expects a task option argument. That argument is the task that was just finished (if any) by the worker expecting new work. This will be useful for things like task dependencies (for instance, a procedure has been analysed, and can be marked so).
Reviewed By: mbouaziz
Differential Revision: D15181613
fbshipit-source-id: 21f3ba825
Summary:
Adds option `--summary-stats` to `infer report`.
The formatting is not perfect yet but it gives what I want.
Reviewed By: ngorogiannis
Differential Revision: D15064162
fbshipit-source-id: 56c4b4929
Summary: No reason to use custom function name and not implement `Hashable`.
Reviewed By: mbouaziz
Differential Revision: D15097603
fbshipit-source-id: 7303fc15e
Summary: Remove from inferbo summary locations that are unreachable from callers
Reviewed By: ezgicicek
Differential Revision: D15064518
fbshipit-source-id: 734e79b4a
Summary: Using `Fields.to_list` also makes sure we don't forget fields.
Reviewed By: ezgicicek
Differential Revision: D15062353
fbshipit-source-id: aaac9be99
Summary:
TOPL properties are essentially automata, which will be modeled as a set
of procedures. The code-to-analyze makes calls into these procedures,
thereby driving the automaton. In this commit, these calls do not do
anything. The point is to prepare the hook-up mechanism.
Reviewed By: jvillard
Differential Revision: D14819650
fbshipit-source-id: d95ecdb3d
Summary: The name was misleading, the function only forget locs for relations.
Reviewed By: ezgicicek
Differential Revision: D15045933
fbshipit-source-id: 7f41a55e7
Summary:
- `--source-files` was missing.
- The three modes are actually independent, make it clearer and group options by mode.
- Fail if `--procedures` and `--source-files` are used together.
Reviewed By: jeremydubreil
Differential Revision: D15049822
fbshipit-source-id: cc515cb56
Summary:
Replace `$(u,...)` with `$(i,...)` since `$(u,...)` doesn't exist.
Cmdliner was emitting a warning at runtime:
cmdliner error: Unknown cmdliner markup $(u,...) in "Specify classes where the destructor should be ignored when computing liveness. In other words, assignement to variables of these types (or common wrappers around these types such as $(u,unique_ptr<type>)) will count as dead stores when the variables are not read explicitly by the program. (default: $(i,[]))"
Reviewed By: mbouaziz
Differential Revision: D15045004
fbshipit-source-id: e03ece4f7
Summary:
A long-standing easter egg from infer error messages is the "object
`null` could be null and is dereferenced at line ...". I tried to fix
this but the part that generates the first "null" in the message and the
part that generates the second one are very far apart and it's hard to
see how to make the second part aware of the first in a clean way.
Instead, hack around it by detecting if the string representing the
value is literally `null` and in that case chop `could be null ` from
the error messages...
Reviewed By: jeremydubreil
Differential Revision: D14972324
fbshipit-source-id: ccc48ce6b
Summary:
We get messages like " object returned by `getArguments()` at line 101."
instead of " object returned by `getArguments()` could be null and is
dereferenced at line 101.". Tracking it down, it happens for
nullable-looking values, but I don't know why.
It seems that something regressed but I couldn't track it down.
So, just generate the error message in the same way as for non-nullable
objects in this case to fix the non-sensical message.
Reviewed By: jeremydubreil
Differential Revision: D14972325
fbshipit-source-id: 2a97501cc
Summary:
Feedback from peterogithub:
- mention which access path is being invalidated and accessed in the message
- mention the line at which it was invalidated (the line at which it's accessed is already the line at which we report)
- traces for stack variable/C++ temporary address escapes
- delete double implementation of the same functionality in
`PulseTrace`: `location_of_action_start` is the same as
`outer_location_of_action`...
Reviewed By: jberdine
Differential Revision: D14800294
fbshipit-source-id: 3d9ab9b3d
Summary:
Similarly to function parameters (and the return value), we need to
apply the pre/post of a function call to the globals mentioned in its
summary.
- tigthen summaries further to remember only abducible variables in the
post (as well as in the pre)
- take globals into account when applying pre/post pairs
Reviewed By: jberdine
Differential Revision: D14780800
fbshipit-source-id: fc0d180bb
Summary:
The heuristic to detect variables going out of scope was to detect any
access expression passed as argument to an injected destructor call.
However destructor calls are also injected in destructor bodies to
destruct each field of an object, so the heuristic would detect fields
going out of scope, which, erm, doesn't make sense. Limit the heuristic
to local program variables.
Reviewed By: jberdine
Differential Revision: D14771454
fbshipit-source-id: ffa3c9fe3
Summary:
Only throw values to the pre if they can be followed from "abducible"
variables: formals of the current method and globals.
Because figuring out if a `Pvar.t` is a formal of the current procedure
is actually a giant pain, hack something not too bad instead:
pre-register all formals at the start of the analysis of the
procedure. Then the only other variables we care about in the
precondition are globals, which we can detect easily.
This is mostly an optimisation (summaries won't include irrelevant
"abduced" facts about the procedure's local variables anymore), but it
also fixes a bug where we would sometimes overwrite things in the pre. I
think that's why the tests improved.
Reviewed By: ngorogiannis
Differential Revision: D14753493
fbshipit-source-id: 08e73637f
Summary:
This is useful for the model of `exit` that returns 0 disjuncts. All
other models return 1 disjunct for now, but in the future things like
`malloc()` will need to return 2 possible states for instance.
Reviewed By: ngorogiannis
Differential Revision: D14753491
fbshipit-source-id: 3e7387d6d
Summary:
This mostly doesn't make sense. The only thing this would have been good
for was to give the most accurate result on access paths such as
`*(&(x.f))`, but these are normalised anyway (into `x.f`) so we actually
never see these. That said there might be some use to some similar logic
in the future, but in the meantime let's delete the current feature as
it wasn't thought through.
Reviewed By: ezgicicek
Differential Revision: D14753492
fbshipit-source-id: 597cec027
Summary:
The previous message formatting had regressed and produced non-sensical messages.
More importantly, remove template parameters from error messages to
trigger the heuristic in `InferPrint` that deduplicates errors that are
on the same line with the same error type and message. Without this we
get hundreds of reports that correspond to as many instantiations of the
same code.
Reviewed By: ngorogiannis
Differential Revision: D14747979
fbshipit-source-id: 3c4aad2b1
Summary:
We see the magic function `__variable_initialization` at the point where
the variable is declared, eg `int x = foo()`. It's safe to reset `&x` at
that point. This circumvents an issue that pops up in some rare cases
where the ternary conditional operator `?:` and variable initialization
conspire to produce weird frontend results.
Some test becomes a FN again, but I think it was being reported for the
wrong reasons; will investigate more later.
Reviewed By: ngorogiannis
Differential Revision: D14747980
fbshipit-source-id: e75d6e30f
Summary:
This is ~2.5x wall clock faster, ~5x user time faster, and finds 98% of
the bugs. Not very scientific yet but seems better than the previous
non-scientific arbitrary default.
Reviewed By: ngorogiannis
Differential Revision: D14753494
fbshipit-source-id: b72cdd613
Summary:
Useful to know which disjunct is being executed. Reprinting them
wholesale is too spammy so compromise by outputting just enough to be
able to reconstruct the info "which disjunct was executed and which new
disjuncts were produced?".
Reviewed By: ngorogiannis
Differential Revision: D14753495
fbshipit-source-id: f5aa68160
Summary:
This isn't needed now that this information is recorded in
`PulseTrace.action` instead.
Reviewed By: mbouaziz
Differential Revision: D14645089
fbshipit-source-id: 9c3f38722
Summary:
This ensures that each attribute type can only be present once per
address. Makes ~80x time improvement on pathological cases such as
Duff's device.
This introduces a new kind of Set in `PrettyPrintable`.
Reviewed By: mbouaziz
Differential Revision: D14645091
fbshipit-source-id: c7f9b760c
Summary:
Detect when a variable goes out of scope. When that's the case, mark its
address *and* its contents as invalid.
Give subsequent uses a USE_AFTER_LIFETIME error type instead of
USE_AFTER_DESTRUCTOR.
Reviewed By: jberdine
Differential Revision: D14387147
fbshipit-source-id: a2c530fda
Sungkeun Cho
Jules Villard
Ezgi Çiçek
Phoebe Nichols
Artem Pianykh
Mitya Lyubarskiy
David Pichardie
Nikos Gorogiannis
Martin Trojer
Mehdi Bouaziz
Radu Grigore
Dino Distefano
Josh Berdine
Peter O'Hearn
Jeremy Dubreil
Andrew Adams-Moran
David Lively
Lee Howes
Daniel Mercier