Summary:
This approach was requiring the `InferArray` class to always be part of the classpath, and the only benefit was to preserve the length of the arrays, when known, on calls to `clone()` method. However, adding it to the models would create circular dependencies between the models, the builtins and the tests.
The code is now simpler and we can more aggressively fail when classes that are supposed to be found from the classpath are not found.
Reviewed By: sblackshear
Differential Revision: D5703173
fbshipit-source-id: 3e6cea5
Summary:
Saw these two types of errors before (but they're hard to reproduce locally) when building the models:
- `ERROR: Zip.Error("/mnt/btrfs/trunk-git-infer-739-1503054473/infer/bin/../lib/java/models.jar", "", "end of central directory not found, not a ZIP file")`. I think this means infer reads a partially-written models jar. We shouldn't try to load this in models mode.
- `install` would complain that the destination already exists. I think this can only happen if there's a race and the file gets created between when install first checks and when it tries to write to it.
This made me realise that the some of the models are computed in C and C++ mode
and we pick one computed spec arbitrarily. That sounds a bit dodgy but at least
now we do so in a non-racy way.
Reviewed By: jeremydubreil
Differential Revision: D5658389
fbshipit-source-id: 8077279
Summary: Using a dedicated abstract domain, like Quandary does, is more suitable for taint analysis.
Reviewed By: sblackshear
Differential Revision: D5473794
fbshipit-source-id: c917417
Summary: This fixes a couple of false positives as objects of BufferedReader don't need to be closed if the wrapped reader resource gets closed correctly.
Reviewed By: sblackshear
Differential Revision: D5106596
fbshipit-source-id: 725fb80
Summary: Useful to have Eradicate and Biabduction agree on how to inform that the analysis that some objects are not null.
Reviewed By: sblackshear
Differential Revision: D5075127
fbshipit-source-id: 9e56981
Summary:
It can be useful when debugging infer or the Makefiles themselves to see what
`make` is doing. Instead of editing Makefiles to remove `@` now you can `make
VERBOSE=1`.
This is just `git ls-files | grep -e Makefile -e '.*\.make' | xargs sed -e 's/^\t@/\t$(QUIET)/' -i`, and adding the definition of `QUIET` to Makefile.config.
Reviewed By: jeremydubreil
Differential Revision: D4779115
fbshipit-source-id: e6e4642
Summary:
This makes sure that one can run `./build-infer.sh` then `make`. Otherwise it's
not always clear what one should do to recompile infer, eg when `make` will
work and when `./build-infer.sh` should be used instead, in particular when the
user doesn't have opam configured for her terminal.
Reviewed By: jberdine
Differential Revision: D4698159
fbshipit-source-id: 5df8059
Summary:
This is helpful to make sure tests are up to date wrt the models.
Also made the Java deps depend on the models.jar instead of the model sources
as that's what the tests will be using. In particular, updating the sources of
the models will not update the results of a test unless someone rebuilds
models.jar, so rerunning the tests when the models haven't been rebuilt is
useless.
Reviewed By: akotulski
Differential Revision: D4635129
fbshipit-source-id: 75b4ab6
Summary:
The Java models for resources are way to complex. The main issue I am facing with these models is that small changes in the analysis can affect the generation of the models in some weird ways. For instance, I get different specs for some of the models between my devserver and my devvm, which seems to be mostly related with the backend treatment of `instanceof`.
The objective here is to simplify the models as much as possible in order to:
1) make debugging regressions easier
2) get simpler specs and less modeled methods shipped in `models.jar`
Reviewed By: sblackshear
Differential Revision: D4536115
fbshipit-source-id: 577183a
Summary: The diff remove the no-op model for `Cursor.close()` by the frontend-based `Closeable` as resources mechanism where every call of the form `object.close()` removes the file attribute on `object` when `object` is of type `Closeable`.
Reviewed By: sblackshear
Differential Revision: D4519386
fbshipit-source-id: 83633d4
Summary: Those should be treated angelically during the analysis with the same end results
Reviewed By: sblackshear
Differential Revision: D4518930
fbshipit-source-id: ee5bae8
Summary: Not clear why we need to disable this case and in which case is Infer creating too many disjunctions.
Reviewed By: sblackshear
Differential Revision: D4509394
fbshipit-source-id: fbc106d
Summary:
Turns this was needed only because we want infer-out to be models/infer.
Passing `--buck` together with passing `-d models` to `javac` was achieving the
same thing in a more roundabout way.
Reviewed By: jeremydubreil
Differential Revision: D4423185
fbshipit-source-id: 7cafe3b
Summary: Need to upgrade in order to specify some taint properties on a more recent `WebView` API.
Reviewed By: cristianoc
Differential Revision: D4382590
fbshipit-source-id: 0925742
Summary: Use the lazy dynamic dispatch by default in prod for the Java analysis
Reviewed By: sblackshear
Differential Revision: D4356872
fbshipit-source-id: 491e92e
Summary: Using multicore introduces some flakiness when building the models. This leads to summries for the models that are not always the same after rebuidling from scratch.
Reviewed By: jberdine
Differential Revision: D4306468
fbshipit-source-id: 96933d6
Summary:
The way interfaces are dealt with led to a false positive,
where tryLock() works OK for a Lock but not for a ReentrantLock.
The solution is just to provide the model.
While I am at it I am adding some more standard tests for Lock and ReentrantLock, which were not present.
Reviewed By: sblackshear
Differential Revision: D4204551
fbshipit-source-id: 9b6de28
Summary:
`install` will not do anything if the file didn't change, which should give
`make` more opportunities to not do work.
Reviewed By: jeremydubreil
Differential Revision: D4161918
fbshipit-source-id: 9b9061a
Summary:
Config.analyze_models, set by the INFER_ANALYZE_MODELS environment
variable, is redundant with Config.models_mode.
Reviewed By: jvillard
Differential Revision: D4047338
fbshipit-source-id: 4522d65
Summary: The Infer builtins can be used in the e2e tests, but those tests should not depend on the Infer models to avoid cyclic dependencies. This diff separates the models and the Infer builtins in two directories so that the test can depend on the builtins without depending on the models
Reviewed By: sblackshear
Differential Revision: D3929478
fbshipit-source-id: 7d0ab79
Summary:
Hardcoding `variable@` in Makefiles is Bad™ because it prevents the users from
overwriting them easily with `make variable="my custom value"`. The right way
to do it is thus:
```
variable = variable@
# then use $(variable) everywhere
```
This diff puts all the `variable = variable@` lines in Makefile.config.in, and
changes every occurrence of a `variable@` to `$(variable)` everywhere else.
I mostly automated generating this diff. Here are the steps I did:
- find out which `variable@`s we use:
find . -name 'Makefile*' -exec grep -e '@[^@ []\+@' -o -h \{\} \+ | sort | uniq > config_variables
- write this `replace.sh` script to replace every `variable@` with `$(variable)`:
```
#!/bin/sh
config_vars_file=$1
shift
for line in $(cat $config_vars_file); do
var=$(echo $line | tr -d @)
sed -i -e "s/$line/\$($var)/g" $@ > /dev/null
done
```
- run the script as such:
find . -name 'Makefile.*in' \( -not -wholename './Makefile.config.in' \) -exec ./replace.sh config_variables \{\} \+
- put all the `VARIABLE = VARIABLE@` lines in Makefile.config.in
- move all `Makefile.in` to `Makefile`, since they don't need to be generated by `./configure` anymore:
```
for i in $(find . -name 'Makefile.*in' \( -not -wholename './Makefile.config.in' \)); do \
rm $(dirname $i)/$(basename $i .in) && git mv $i $(dirname $i)/$(basename $i .in) ; \
done
```
- delete all Makefile except Makefile.config from configure.ac
- manually inspect and remove remaining instances of `VAR = $(VAR)` in makefiles, looking at the output of `git grep '^\(\w\+\) = $(\1)'`
Reviewed By: jberdine
Differential Revision: D3358379
fbshipit-source-id: 5d37f02
Summary:public
The code:
DataInputStream in = new DataInputStream(new BufferedInputStream(new FileInputStream(file)));
creates a resource with `FileInputStream()` and wraps it twice as a field of `BufferedInputStream` and then as a field of `DataInputStream`. Then calling:
in.close();
needs to go down the wrappers hierachy: `DataInputStream.close()` -> `FilterInputStream.close()` which then calls `BufferedInputStream.close()` -> `FilterInputStream.close()` -> `FileInputStream.close()`.
Going down the wrapper was not working before because `FilterInputStream.close()` was only going further when the type of field `in` was `FileInputStream` wheras it should also continue when the type of the field is any subtype of `FilterInputStream`, e.g. `DataInputStream` and `BufferedInputStream` like in the test example. This diff fixes this last aspect.
Reviewed By: sblackshear
Differential Revision: D3174822
fb-gh-sync-id: 3adbb7e
fbshipit-source-id: 3adbb7e
Summary:public
This is needed to have a working `opam install infer`. Actual working `opam
install infer` in a follow-up diff.
Reviewed By: jberdine
Differential Revision: D3109308
fb-gh-sync-id: 49d7276
fbshipit-source-id: 49d7276
Summary:
public
This model does not seem to bring anything anymore. Useless because ...
Reviewed By: cristianoc
Differential Revision: D2920118
fb-gh-sync-id: 7f708d7
shipit-source-id: 7f708d7
Jeremy Dubreil
Jules Villard
Sam Blackshear
Josh Berdine
Peter O'Hearn
Lázaro Clapp Jiménez Labora