Summary:
Move Inferbo safety conditions to their own file.
Split the old `Condition.t` to a condition together with a trace.
This will ease having: different kind of condition and several traces for the same condition (see following diff)
Reviewed By: jvillard
Differential Revision: D5942030
fbshipit-source-id: d74a612
Summary: Not using this for now, and it seems good to simplify the complex domain as much as we can.
Reviewed By: jberdine
Differential Revision: D5970233
fbshipit-source-id: a451503
Summary:
This is due to the changes in `facebook-clang-plugins` where objc_object_type_info now has a `field_prefix` set to `ooti_`
See 5f2042abe6 for the changes made to `facebook-clang-plugins`
update-submodule: facebook-clang-plugins
Reviewed By: jvillard
Differential Revision: D5963064
fbshipit-source-id: 9705774
Summary:
Running `infer report foo.specs` would overwrite report.json with an empty json.
Only recompute report.json when running `infer-analyze` or `infer-run`.
Reviewed By: mbouaziz
Differential Revision: D5963500
fbshipit-source-id: e579c6f
Summary:
Use a monotonic time source instead.
Also, sleep between retries in the Serialization code.
Reviewed By: jberdine
Differential Revision: D5941697
fbshipit-source-id: 05efbe1
Summary:
Despite what the sqlite manual says, it looks like it's possible for sqlite not
to remove the -shm and -wal files after a successful termination.
Close the database and clean them up in Buck mode so that they do not perturb
the cache.
Reviewed By: martinoluca
Differential Revision: D5953967
fbshipit-source-id: 9068b01
Summary:
Inject a marker using a global variable in <iostream>, and whitelist it so that
the frontend translates it.
Use the marker in the SIOF checker to tell whether a file includes <iostream>.
If so, start the analysis of its methods assuming that the standard streams are
initialised.
Reviewed By: sblackshear
Differential Revision: D5941343
fbshipit-source-id: 3388d55
Summary:
The previous domain for SIOF was duplicating some work with the generic Trace
domain, and basically was a bit confused and confusing. A sink was a set of
global accesses, and a state contains a set of sinks. Then the checker has to
needlessly jump through hoops to normalize this set of sets of accesses into a
set of accesses.
The new domain has one sink = one access, as suggested by sblackshear. This simplifies
a few things, and makes the dedup logic much easier: just grab the first report
of the list of reports for a function.
We only report on the fake procedures generated to initialise a global, and the
filtering means that we keep only one report per global.
Reviewed By: sblackshear
Differential Revision: D5932138
fbshipit-source-id: acb7285
Summary:
Wrap ANSITerminal so that it doesn't apply control codes unless they can be
interpreted, and so that clients are unable to call ANSITerminal directly.
Reviewed By: mbouaziz
Differential Revision: D5953733
fbshipit-source-id: 6b3602a
Summary:
Bottom bounds do not make sense (what is the meaning of `[_|_; 1]`?), let's get rid of them.
`Bot` was useful for substitution though, with a special meaning, use `bottom_lifted` for that case.
Reviewed By: skcho
Differential Revision: D5941796
fbshipit-source-id: 5778255
Summary: A bottom interval in a safety condition doesn't make sense. Let's not allow it at all.
Reviewed By: skcho
Differential Revision: D5941552
fbshipit-source-id: 6bd2a65
Summary: If we know for sure we won't need to store an attribute in the DB, there's no need to compute its marshalled value.
Reviewed By: jberdine
Differential Revision: D5891050
fbshipit-source-id: cf4534e
Summary:
This adds more structure to the SQL schema backing attributes. With that, we
can transfer the logic for updating attributes in SQLite, instead of doing
optimistic concurrency in the client.
Reviewed By: jberdine
Differential Revision: D5891038
fbshipit-source-id: 6577ba2
Summary:
- use a similar key as for specs in the attributes table
- cache blob computations
- this improves memory usage a lot
Reviewed By: mbouaziz
Differential Revision: D5824177
fbshipit-source-id: c318577
Summary:
Preparing statements allocates memory and is generally best done once and for all.
We need to re-prepare statements when opening a new DB connexion (after each fork).
Reviewed By: mbouaziz
Differential Revision: D5824157
fbshipit-source-id: 4d239ac
Summary: Not sure if useful but seems sensible. It disappears at the top of the stack when we do merging in SQL.
Reviewed By: mbouaziz
Differential Revision: D5824131
fbshipit-source-id: fd64752
Summary: Use `pp` functions until it needs to be turned into a string.
Reviewed By: jvillard
Differential Revision: D5941473
fbshipit-source-id: 87ca9df
Summary:
Use an SQLite database to store proc attributes, instead of files on disk.
Wrap SQLite operations in two layers:
1. `SqliteUtils` provides helper functions to make sure DB operations succeed
2. `KeyValue` provides a functor to expose a simple and type-safe key/value store backed by the SQLite DB.
Reviewed By: jberdine
Differential Revision: D5640053
fbshipit-source-id: 31050e5
Summary:
Its value is unused in Infer and is constantly emitted as None from facebook-clang-plugins, so it was also removed from facebook-clang-plugins (a96c39601f)
update-submodule: facebook-clang-plugins
Reviewed By: jvillard
Differential Revision: D5940900
fbshipit-source-id: e7fd6ae
Summary: Remove functions that are redundant with Base.List functions on sorted lists.
Reviewed By: mbouaziz
Differential Revision: D5931792
fbshipit-source-id: caec210
Summary: The case of closures was not considered for the convertion of SIL instructions into HIL instructions
Reviewed By: sblackshear
Differential Revision: D5929675
fbshipit-source-id: bb6920a
Summary: These folders are left empty when linting, so better not create them.
Reviewed By: jvillard
Differential Revision: D5921418
fbshipit-source-id: f6efc4f
Summary: The tests are slower when running in debug mode, and it creates a lot of html outputs
Reviewed By: sblackshear
Differential Revision: D5916511
fbshipit-source-id: 07c90b7
Summary:
This diff does two things:
# Infer no longer add the contrains that the return value of a skip function is never null. This was leading to false negatives and is not necessary as those return value are treated angelically
# Infer now support `Nonnull` on the return value of skip functions.
Reviewed By: jberdine, sblackshear
Differential Revision: D5840324
fbshipit-source-id: bbd8d82
Summary:
`reraise` was error-prone when one forgot to save the backtrace between where the exception is caught and where it is reraised.
If any exception was raised (even caught) in between, the printed backtrace would be the one of the last exception thrown and it would be very confusing.
This diff kills `reraise` and introduces `reraise_after exn ~f` and `reraise_if exn ~f` to be used right after catching the exception.
Also turned some of them to the common pattern `try_finally ~f ~finally`.
Reviewed By: jvillard
Differential Revision: D5911244
fbshipit-source-id: 9883d1e
Summary: Example of combination between annotating fields with nullable and the biabduction analysis in Objective C
Reviewed By: dulmarod
Differential Revision: D5906016
fbshipit-source-id: b95c6e0
Summary:
The interval bound of the abstract domain is extended.
`[min|max](int, symbol)` => `int [+|-] [min|max](int, symbol)`
As a result, `vector::empty` can be modelled to return a more precise value: `1 - min(1, size)`.
Reviewed By: mbouaziz
Differential Revision: D5899404
fbshipit-source-id: c8c3f49
Summary:
We take it into account to not report bugs inside the available block. This requires a plugin change.
update-submodule: facebook-clang-plugins
Reviewed By: jvillard
Differential Revision: D5891511
fbshipit-source-id: 21a02ad
Summary:
With this change and the previous facebook-clang-plugins change, infer no
longer exhausts the biniou buffer when reading the serialized C++ AST.
update-submodule: facebook-clang-plugins
Reviewed By: mbouaziz
Differential Revision: D5891081
fbshipit-source-id: cf48eac
Summary:
These get way too big in C++, and we only use the very first word of them, to
tell apart class from struct from union... so sad, very bad.
update-submodule: facebook-clang-plugins
Reviewed By: mbouaziz
Differential Revision: D5890594
fbshipit-source-id: 49e6284
Summary:
The only language types we have are Java/Clang/Python. The unit of analysis is a source file, and you can't write a source file that mixes two or more of these languages (to the best of my knowledge).
This diff simplifies using the assumption that all procedures in a file are written in the same language.
Reviewed By: jeremydubreil
Differential Revision: D5886942
fbshipit-source-id: 88c3759
Summary:
The only language types we have are Java/Clang/Python. The unit of analysis is a source file, and you can't write a source file that mixes two or more of these languages (to the best of my knowledge).
This diff simplifies using the assumption that all procedures in a file are written in the same language.
Reviewed By: jeremydubreil
Differential Revision: D5886942
fbshipit-source-id: 8555a16
Summary: Only Eradicate uses this, no need to create it for every checker.
Reviewed By: jeremydubreil
Differential Revision: D5886775
fbshipit-source-id: 7242437
Summary:
A Java cluster checker currently defines a "cluster" as all of the procedures in the same class.
But the cluster checker actually knows about all the procedures defined in the same source file.
In some checkers (such as thread-safety), we want to aggregate results across classes in the same file, not just methods in the same class.
This refactoring leaves the behavior the same for now, but will make it easier to do this in the near future.
Reviewed By: jeremydubreil
Differential Revision: D5885896
fbshipit-source-id: 0815fca
Summary:
Calling functions that raise exceptions (even if they get caught) may smudge
the backtraces we get from OCaml. We need to record the original backtrace
*before* calling such fuctions on the path between catching an exception and
reraising it.
Also change the heptuple returned by `Exceptions.recognize_exception` into a
record type, and make that function not raise when classifying exceptions.
Reviewed By: jberdine
Differential Revision: D5882934
fbshipit-source-id: 8e99fe8
Summary: Infer can then detect the resource leak when resources are stored into a container
Reviewed By: sblackshear
Differential Revision: D5887702
fbshipit-source-id: 6106cfb
Summary: The point of the tracing mode is to compute all the possible path leading to an error state. However, within a method, many of those paths are not feasibile in practice. This leads to many false alarms for the resource leak analysis.
Reviewed By: sblackshear
Differential Revision: D5888695
fbshipit-source-id: 2dbc57b
Summary: Model the `remove(...)` and the `clear()` method of `HashMap`.
Reviewed By: sblackshear
Differential Revision: D5887674
fbshipit-source-id: c3f40ee
Summary: Handling the utility functions for asserting that we're on background thread.
Reviewed By: jberdine
Differential Revision: D5863435
fbshipit-source-id: 3ad95b5
Summary:
Previously, we just tracked a boolean representing whether we were possibly on the main thread (true) or definitely not on the main thread (false).
In order to start supporting `Thread.start`, `Runnable.run`, etc., we'll need something more expressive.
This diff introduces a lattice:
```
Any
/ \
Main Background
\ /
Unknown
```
as the new threads domain. The initial value is `Unknown`, and we introduce `Main` in situations where we would have introduced `true` before.
This (mostly) preserves behavior: the main difference is that before code like
```
if (*) {
assertMainThread()
} else {
x.f = ...
}
```
would have recorded that the access to `x.f` was on the main thread, whereas now we'll say that it's on an unknown thread.
Reviewed By: peterogithub
Differential Revision: D5860256
fbshipit-source-id: efee330
Summary:
It's useful to be able to disable de-duplication on the command line with `--no-filtering`.
Gate de-duplication with `Config.filtering` and move the de-duplication tests to a new directory under the build systems tests.
Reviewed By: jeremydubreil
Differential Revision: D5865329
fbshipit-source-id: 5094f5b
Summary:
Since D5381239, infer is careful not to delete directories that do not "look
like" results directories on startup, in case the user passed, eg, `-o /`.
In our repo, lots of results dir are created by build/test of infer, and when
the version of infer changes and the expected contents of results directories
change then it might start refusing to delete the results directories created
with another version of infer.
Add an option to force infer to delete the results directory no matter how
dodgy it looks, and use it in our repo by adding the option in every
.inferconfig.
Reviewed By: mbouaziz
Differential Revision: D5870984
fbshipit-source-id: 09412de
Summary: Will then be easier to understand if some changes in the test results is legit or not.
Reviewed By: sblackshear
Differential Revision: D5863961
fbshipit-source-id: 7eb3f33
Summary: Parmap delivers a better scheduling, which works as a pipeline, as opposed to what existed before, which schedules processes in batches.
Reviewed By: jvillard
Differential Revision: D5678661
fbshipit-source-id: a632c71
Summary:
Suggesting to add `_Nullable` on the fields checked for, or assigned to, `nullptr` will allow the biabduction analysis to report null dereferences that are related to the lifetime of objects.
Depends on D5832147
Reviewed By: sblackshear
Differential Revision: D5836538
fbshipit-source-id: c1b8e48
Summary: The prune nodes where translated as `prune (expr = false)` and `prune ( expr != false)`. This case is a bit tricky to deconstruct in HIL. This diff translates the prune instructions as just `prune !expr` for the true branch and `prune expr` for the false branch.
Reviewed By: dulmarod
Differential Revision: D5832147
fbshipit-source-id: 2c3502d
Summary:
We need to make sure that destructors of virtual base classes are called only once. Similarly to what clang does, we have two destructors for a class: a destructor wrapper and an inner destructor.
Destructor wrapper is called from outside, i.e., when variables go out of scope or when destructors of fields are being called.
Destructor wrappers have calls to inner destructors of all virtual base classes in the inheritance as their bodies.
Inner destructors have destructor bodies and calls to destructor wrappers of fields and inner destructors of non-virtual base classes.
Reviewed By: dulmarod
Differential Revision: D5834555
fbshipit-source-id: 51db238
Summary:
The "placement new" operator `new (e) T` constructs a `T` in the pre-allocated memory address `e`.
We weren't translating the `e` part, which was leading to false positives in the dead store analysis.
Reviewed By: dulmarod
Differential Revision: D5814191
fbshipit-source-id: 05c6fa9
Summary:
With flambda (`-O3`), compilation time is ~5x slower, but the backend is ~25% faster!
To mitigate the atrocious compilation times, introduce a new `opt` build mode in the jbuilder files.
- build in "opt" mode by default from the toplevel (so that install scripts and external users get the fastest infer by default), in "default" mode by default from infer/src (since the latter is only called directly by infer devs, for faster builds)
- `make byte` is as fast as before in any mode
- `make test` will build "opt" by default, which is very slow. Solution for testing (or building the models) locally: `make BUILD_MODE=default test`.
- You can even change the default locally with `export BUILD_MODE=default`.
The benchmarks are to be taken with a sizable pinch of salt because I ran them only once and other stuff could be running in the background. That said, the perf win is consistent across all projects, with 15-20% win in wallclock time and around 25% win in total CPU time, ~9% win in sys time, and ~25% fewer minor allocations, and ~5-10% fewer overall allocations. This is only for the backend; the capture is by and large unaffected (either the same or a tad faster within noise range).
Here are the results running on OpenSSL 1.0.2d on osx (12 cores, 32G RAM)
=== base
infer binary: 26193088 bytes
compile time: 40s
capture:
```lang=text
real 1m7.513s
user 3m11.437s
sys 0m55.236s
```
analysis:
```lang=text
real 5m41.580s
user 61m37.855s
sys 1m12.870s
```
Memory profile:
```lang=json
{
...
"minor_gb": 0.1534719169139862,
"promoted_gb": 0.0038930922746658325,
"major_gb": 0.4546157643198967,
"allocated_gb": 0.6041945889592171,
"minor_collections": 78,
"major_collections": 23,
"compactions": 7,
"top_heap_gb": 0.07388687133789062,
"stack_kb": 0.3984375,
"minor_heap_kb": 8192.0,
...
}
```
=== flambda with stock options (no `-Oclassic`, just the same flags as base)
Exactly the same as base.
=== flambda `-O3`
infer binary: 56870376 bytes (2.17x bigger)
compile time: 191s (4.78x slower)
capture is the same as base:
```lang=text
real 1m9.203s
user 3m12.242s
sys 0m58.905s
```
analysis is ~20% wallclock time faster, ~25% CPU time faster:
```lang=text
real 4m32.656s
user 46m43.987s
sys 1m2.424s
```
memory usage is a bit lower too:
```lang=json
{
...
"minor_gb": 0.11583046615123749, // 75% of previous
"promoted_gb": 0.00363825261592865, // 93% of previous
"major_gb": 0.45415670424699783, // about same
"allocated_gb": 0.5663489177823067, // 94% of previous
"minor_collections": 73,
"major_collections": 22,
"compactions": 7,
"top_heap_gb": 0.07165145874023438,
"stack_kb": 0.3359375,
"minor_heap_kb": 8192.0,
...
}
```
=== flambda `-O2`
Not nearly as exciting as `-O3`, but the compilation cost is still quite high:
infer: 37826856 bytes
compilation of infer: 100s
Capture and analysis timings are mostly the same as base.
Reviewed By: jberdine
Differential Revision: D4867979
fbshipit-source-id: 99230b7
Summary:
This can be a long-running step and it's useful to know how long it took. We
already dump some statistics on stderr after merging is done, this just adds
one more line.
Reviewed By: mbouaziz
Differential Revision: D5833580
fbshipit-source-id: 70e19ab
Summary:
Simple instance of the problem: analyzing the following program times out.
```
#include <tuple>
void foo() {
std::tuple<std::tuple<int>> x;
}
```
Replacing `std::tuple<std::tuple<int>>` by `std::tuple<int>` makes the analysis
terminate.
In the AST, both tuple<tuple<int>> and tuple<int> have the same template
specialization type: "Pack" (which means we're supposed to go look into the
arguments of the template to get their values). This is not information enough
and that's the plugin fault.
On the backend side, this means that two types have the same Typ.Name.t, namely
"std::tuple<_>", so they collide in the tenv. The definition of
tuple<tuple<int>> is the one making it into the tenv. One of the fields of the
corresponding CxxRecord is of type "tuple<int>", which we see as the same
"tuple<_>", which causes the loop.
update-submodule: facebook-clang-plugins
Reviewed By: mbouaziz
Differential Revision: D5775840
fbshipit-source-id: 0528604
Summary:
Sort the complete set of warnings by everything except procname, then de-duplicate.
This scheme prevents reporting identical error messages on the same line/same file.
This is important for avoiding duplicate reports on multiple instantiations of the same template.
Reviewed By: jberdine
Differential Revision: D5819467
fbshipit-source-id: 984f47f
Summary: The resolution was previously only happening for constructors, but calls to private methods or to `super` are also neither static calls nor virtual calls. In this case, the resolution logic should be the same as for constructors.
Reviewed By: sblackshear
Differential Revision: D5830376
fbshipit-source-id: 9b56f80
Summary:
The reporting phases iterates over each procedure summary and print all the issues from each procedure.
That's nice because we don't have to build a big list of the issues in-memory, but it's not so nice if you want to ouput the reports in a certain order or de-duplicate them.
This diff builds the in-memory list and outputs the issues afterward. By itself, this isn't very useful. But in the near future it will allow us to:
- Group all of the issues from the same file (finally!!!)
- Get rid of duplicate issues on multiple instantiations of the same C++ template
- Probably other cool stuff too
Reviewed By: jeremydubreil, mbouaziz
Differential Revision: D5816646
fbshipit-source-id: 799bcd0
Summary:
The clang frontend uses `assert false` for unimplemented features that should
abort method translations, as well as for genuine internal errors.
Distinguishing between the two, we can fail hard on the latter and not the
former.
1. This introduces a new exception `Unimplemented` that is used instead of `assert false` where appropriate.
2. Changed some other cases into `die ...` (when there's an error message to display)
3. Wherever a path in the code that we assumed to be unreachable was observed reachable, we now raise `IncorrectAssumption`. These should be fixed, but the fixes are not obvious.
Reviewed By: sblackshear
Differential Revision: D5784384
fbshipit-source-id: 61b55af
Summary:
In the most recent version of clang plugin, lambda captures were moved from `LambdaExpr` to `CXXRecordDecl`. Updating infer to reflect this change.
update-submodule: facebook-clang-plugins
Reviewed By: jvillard
Differential Revision: D5823034
fbshipit-source-id: dd5fc45
Summary: This will run infer with `--no-keep-going` by default in our tests.
Reviewed By: sblackshear
Differential Revision: D5814237
fbshipit-source-id: c1e1a4e
Summary:
"Running as clang" was its own infer subcommand. That's not terribly good
because it makes it hard to specify another subcommand, and in particular it
broke the `compile` subcommand in some integrations because "running as clang"
would always do capture. The cmake tests required to run with `--keep-going`
because of this.
Instead of having its own fake subcommand, simply add a new boolean in the
config for "infer runs as clang", as we do for javac already (used in the mvn
integration).
Also make logging of the environment better.
Reviewed By: jberdine
Differential Revision: D5813986
fbshipit-source-id: 72b96cd
Summary: This is to prevent test failures to happen whenchanging the code a little.
Reviewed By: sblackshear
Differential Revision: D5815349
fbshipit-source-id: 8516102
Summary: Destroying local variables that are out of scope after `continue`.
Reviewed By: jberdine
Differential Revision: D5804120
fbshipit-source-id: 638cff5
Summary: I often find myself needing a generic `Pp.seq` where I can specify the separator.
Reviewed By: jeremydubreil
Differential Revision: D5803915
fbshipit-source-id: fb8d30d
Summary: That match branch is Java-only but could be reached with a C++ method, causing a crash.
Reviewed By: jberdine, mbouaziz
Differential Revision: D5814041
fbshipit-source-id: 6b1b501
Summary: It's useful to be able to configure both max depth and max width
Reviewed By: jeremydubreil
Differential Revision: D5801567
fbshipit-source-id: 0138cd7
Summary:
Races on the internal implementation of data structures defined in
system headers are currently not detected, since the memory accesses
are in procedures that are not analyzed.
This diff adds models for a few std::map operations that indicate if
they read or write the underlying representation.
Reviewed By: da319
Differential Revision: D5804293
fbshipit-source-id: 55ff28c
Summary: Try to preserve the original backtrace. Introduce `reraise` in the global namespace.
Reviewed By: jberdine
Differential Revision: D5804121
fbshipit-source-id: 0947a47
Summary:
This makes it much easier to read infer logs coming from these subprocesses
that use a sub-results dir.
Reviewed By: jberdine
Differential Revision: D5777783
fbshipit-source-id: f074536
Summary: Destroying local variables that are out of scope after `break`.
Reviewed By: jberdine
Differential Revision: D5764647
fbshipit-source-id: a7e06ae
Summary: The successor node of `continue` was not correct inside the `do while`.
Reviewed By: sblackshear
Differential Revision: D5769578
fbshipit-source-id: d7b0843
Summary:
Read the documentation and it doesn't seem like these functions are guaranteed to choose the same value in different runs.
I hypothesize that these may be the source of flakiness in the thread-safety tests/smoke tests.
Reviewed By: jvillard
Differential Revision: D5794384
fbshipit-source-id: 02b7a96
Summary: With this diff, the analysis trace will jump to the definition of the skipped methods when the location is known. This is especially useful when the analysis is relying on the method annotations.
Reviewed By: sblackshear
Differential Revision: D5783428
fbshipit-source-id: 561b739
Summary: The code was previously inconsistent as passing the option was using an empty list of instructions to translate the code but still using the original JBIR representation to connect the nodes.
Reviewed By: sblackshear
Differential Revision: D5795903
fbshipit-source-id: 88c0e64
Summary:
The behaviour of infer was observed to be different in 4.04.2 vs (4.05.0 or
4.04.2+flambda). Investigating further, the behaviour is also different in byte
vs native versions of infer under 4.04.2. Looking at the Changelog of 4.05.0
(thanks mbouaziz), there are fixes for inconsistent behaviours between byte
and native relative to evaluation order.
Lots of debugging later, this 1 line patch is born. Also use `List.concat_map`
instead of re-implementing it.
Reviewed By: jberdine
Differential Revision: D5793809
fbshipit-source-id: 374fb4c
Summary: With Logging.exit you have more control of the code that invokes exit, for example when forking and running certain functions that may in turn invoke exit, and you want to handle the execution flow differently - like invoking certain callbacks before exiting, or not exiting at all.
Reviewed By: jvillard
Differential Revision: D5746914
fbshipit-source-id: 596fba1
Summary: This will prevent trivial errors like misspelling node names, e.g. when those are typed as part of the operators `IN-NODE <node-name>` or `HOLDS-IN-NODE <node-name>`
Reviewed By: dulmarod
Differential Revision: D5680411
fbshipit-source-id: e241c1c
Summary: This should be equivalent as far as bug finding is concerned, but will allow the analysis traces to jump into the skipped methods.
Reviewed By: sblackshear
Differential Revision: D5778245
fbshipit-source-id: 3fd061f
Summary:
We supported globals as sources before, but we did so by allowing ClangTrace etc. to match against any access path in the footprint of the trace.
This is very powerful/flexible, but it's ultimately not a good idea because it leads to traces that are hard to read.
This is because a footprint source doesn't have any information about its provenance: we might know that the value came from a global, but we don't know where the read occurred.
The mechanism for handling procedure calls as sources already knows how to solve this problem.
This diff implements globals as sources as a special case of procedure call sources instead.
This will give us much nicer traces with full provenance of the read from the global.
Reviewed By: mbouaziz
Differential Revision: D5772299
fbshipit-source-id: 491ae81
Summary: This is almost equivalent to the previous one except in the case where new and old are both undefined: before, we would just pick "old", but now we pick the biggest according to their source files. I think the previous behaviour was a bug because it was more non-deterministic.
Reviewed By: jberdine
Differential Revision: D5649481
fbshipit-source-id: aeb527d
Summary: It is not clear to me what the removed code was for in the first place. Basically, it was replacing the pure part of propositions in a semantically equivalent way, e.g. replacing `a = b /\ Attribute(a)` to `a = b /\ Attribute(b)`, and `a = b /\ Attribute(b)` to `a = b /\ Attribute(a)`.
Reviewed By: jberdine
Differential Revision: D5657366
fbshipit-source-id: 93cd9e0
Summary: The list of fields of a Java object in SIL is the list of fields declared in the class plus all the fields declared in the the super classes. It turns out that we were missing the fields declared in the implemented interfaces.
Reviewed By: sblackshear
Differential Revision: D5720386
fbshipit-source-id: d65c9de
Summary:
Calling `Exn.backtrace` doesn't give us the current backtrace, only the one of
the latest exception raised. Change the logic of toplevel exception catching to
print the right backtrace.
Also, do not use `Format` to print from `Config` as `Logging` may have messed
with it already.
Finally, throw in some colours!
Reviewed By: jberdine
Differential Revision: D5764825
fbshipit-source-id: cd51688
Summary: Add procedure where error is triggered (if available) + bad data to messages.
Reviewed By: jvillard
Differential Revision: D5756398
fbshipit-source-id: a16f7cf
Summary:
When a lambda has an `auto` parameter, the inferred type of the parameter because part of the name.
Our heuristic for identifying lambda was checking if the lambda's name was exactly `operator()`, which won't catch this case.
Reviewed By: jvillard
Differential Revision: D5753323
fbshipit-source-id: 85ff75a
Summary:
Not translating these properly was causing false positives for the dead store analysis in cases like
```
int i = 0;
return [j = i]() { return j; }();
```
Reviewed By: da319
Differential Revision: D5731562
fbshipit-source-id: ae79ac8
Summary:
Keep track of generated files better and make sure we nuke them on `make clean`.
Also get rid of a few unused variables in infer/src/Makefile.
Reviewed By: sblackshear
Differential Revision: D5754553
fbshipit-source-id: b5fca41
Summary: We inject destructor calls of base classes inside destructor bodies after the destructor calls of fields.
Reviewed By: dulmarod
Differential Revision: D5745499
fbshipit-source-id: 90745ec
Summary: Refactoring destructor translation to take type pointer instead of qual type as a parameter, as we only have type pointers for base classes.
Reviewed By: dulmarod
Differential Revision: D5745490
fbshipit-source-id: 121f492
Summary: We used to crash whenever we hit these. The simple translation implemented here is not particularly inspiring, but it is better than crashing.
Reviewed By: jvillard
Differential Revision: D5702095
fbshipit-source-id: 3795d43
Summary: This appears to be interchangeable with `Config.debug`, so let's kill it.
Reviewed By: jvillard
Differential Revision: D5742685
fbshipit-source-id: d390b6b
Summary: This adds an option to only translate the body of a method when the file matches the give pattern. This is especially intended to be use for generated files.
Reviewed By: jvillard
Differential Revision: D5729120
fbshipit-source-id: 1e28469
Summary: With this, we can now get now get inter-procedural issues involving native methods.
Reviewed By: sblackshear
Differential Revision: D5730638
fbshipit-source-id: 3bdbdbd
Summary: Atoms of the form `identifier = footprint var` naturally occurs with the angelic analysis mode. So it is not clear to me why we should drop those.
Reviewed By: sblackshear
Differential Revision: D5654754
fbshipit-source-id: 9dd2eb5
Summary:
- failwith police: no more `failwith`. Instead, use `Logging.die`.
- Introduce the `SimpleLogging` module for dying from modules where `Logging`
cannot be used (usually because that would create a cyclic dependency).
- always log backtraces, and show backtraces on the console except for usage errors
- Also point out in the log file where the toplevel executions of infer happen
Reviewed By: jeremydubreil
Differential Revision: D5726362
fbshipit-source-id: d7a01fc
Summary: This makes the traces more readable when involving skipped functions.
Reviewed By: sblackshear
Differential Revision: D5731683
fbshipit-source-id: 49d363b
Summary: This new tests outlines that Infer does not detect inter-target issues involving native methods.
Reviewed By: sblackshear
Differential Revision: D5720873
fbshipit-source-id: cce8193
Summary: This should not affect the analysis results so there is no need to raise an exception here. We can always add this unsigned shift operator to SIL if we want the analysis to take them into account
Reviewed By: sblackshear
Differential Revision: D5703792
fbshipit-source-id: 739891f
Summary:
This approach was requiring the `InferArray` class to always be part of the classpath, and the only benefit was to preserve the length of the arrays, when known, on calls to `clone()` method. However, adding it to the models would create circular dependencies between the models, the builtins and the tests.
The code is now simpler and we can more aggressively fail when classes that are supposed to be found from the classpath are not found.
Reviewed By: sblackshear
Differential Revision: D5703173
fbshipit-source-id: 3e6cea5
Summary:
I'm working on parameterizing access trees with a config that will limit max depth + perhaps width if needed.
This is a stepping stone to enforcing max depth.
Reviewed By: jvillard
Differential Revision: D5693453
fbshipit-source-id: c15b0ee
Summary:
Rather than printing the footprint using its actual representation (an access trie with bool nodes), print it as a set of access paths.
This makes it easier to read sources in Quandary specs/debug Quandary.
Reviewed By: jeremydubreil
Differential Revision: D5682630
fbshipit-source-id: ac55b7f
Summary:
Add `is_empty` to `AbstractDomain.WithBottom` sig and use the empty checks for nicer printing of access trees: don't print empty nodes/traces.
This should make it easier to debug Quandary; it's pretty hard to stare at an access tree and see what's going on right now.
Reviewed By: jberdine
Differential Revision: D5682248
fbshipit-source-id: 56d2a9d
Summary:
This gets rid of the horrible hack of asking jbuilder to build
_build/{default,test}/.ppx/ppx_compare/ppx.exe prior to starting several
jbuilds in parallel. We now refrain from starting several jbuilds in parallel.
Also, I finally understood that order-only deps do nothing for phony targets,
and not much else for non-phony ones. I hate make even more.
Reviewed By: jberdine
Differential Revision: D5678699
fbshipit-source-id: 52179e8
Summary:
This simplifies the jbuild files: no need to list these files explicitly
anymore, nor to exclude them explicitly from the main `InferModules` library
(due to their different compilation flags).
Isolate common parts into jbuild.common do `cat`-based code inclusion into
jbuild files to factorize code.
Reviewed By: jberdine
Differential Revision: D5678328
fbshipit-source-id: 6d7d925
Summary: In case of syntax errors in AL files, stdout will contain a JSON list with all files affected by the errors, including info like filename and line number.
Reviewed By: dulmarod, jvillard
Differential Revision: D5640272
fbshipit-source-id: 569b16d
Summary:
A function can both be a sink and propagate source info, but we currently ignore the summary for any function that is also a sink.
This will cause us to under-report for (e.g.) `src1 = source(); src2 = strcpy(dest, src1); exec(src2)`.
This is both a potential buffer overflow and a potential shell injection, but we won't report the second issue.
Reviewed By: jberdine
Differential Revision: D5676167
fbshipit-source-id: 232ab2f
Summary:
We now represent the footprint with an access trie, so this code is no longer required.
This lets us simplify things a bit
Reviewed By: jberdine
Differential Revision: D5664484
fbshipit-source-id: c35edf2
Summary:
In looking at summaries that Quandary took a long time to compute, one thing I notice frequently is redundancy in the footprint sources (e.g., I might see `Footprint(x), Footprint(x.f), Footprint(x*)`).
`sudo perf top` indicates that joining big sets of sources is a major performance bottleneck, and a large number of footprint sources is surely a big part of this (since we expect the number of non-footprint sources to be small).
This diff addresses the redundancy issue by using a more complex representation for a set of sources. The "known" sources are still in a set, but the footprint sources are now represented as a set of access paths (via an access trie).
The access path trie is a minimal representation of a set of access paths, so it would represent the example above as a simple `x*`.
This should make join/widen/<= faster and improve performance
Reviewed By: jberdine
Differential Revision: D5663980
fbshipit-source-id: 9fb66f8
Summary:
The previous widening operator added stars to the *end* of paths that existed in `next` but not `prev`. This is not enough to ensure termination in the case where the trie is growing both deeper and wider at the same time.
The newly added test demonstrates this issue. In the code, there's an ever-growing path of the form `tmp.prev.next.prev.next...` that wasn't summarized by the previous widening operator. The new widening is much more aggressive: it replaces *any* node present in `next` but not `prev` with a `*` (rather than trying to tack a star onto the end). This fixes the issue.
This issue was causing divergence on tricky doubly-linked list code in prod.
Reviewed By: jeremydubreil
Differential Revision: D5665719
fbshipit-source-id: 1310a92
Summary:
Saw these two types of errors before (but they're hard to reproduce locally) when building the models:
- `ERROR: Zip.Error("/mnt/btrfs/trunk-git-infer-739-1503054473/infer/bin/../lib/java/models.jar", "", "end of central directory not found, not a ZIP file")`. I think this means infer reads a partially-written models jar. We shouldn't try to load this in models mode.
- `install` would complain that the destination already exists. I think this can only happen if there's a race and the file gets created between when install first checks and when it tries to write to it.
This made me realise that the some of the models are computed in C and C++ mode
and we pick one computed spec arbitrarily. That sounds a bit dodgy but at least
now we do so in a non-racy way.
Reviewed By: jeremydubreil
Differential Revision: D5658389
fbshipit-source-id: 8077279
Summary: Also, stop trying to delete directories that do not exist: "sources" and "filelists".
Reviewed By: mbouaziz
Differential Revision: D5658089
fbshipit-source-id: e1cdb13
Summary:
This is a check for when an unavailable class is being allocated.
This diff also adds a check for the context to remove false positives: If the class is not available but the method calls are wrapped in a check whether the class is available, then don't report.
Reviewed By: jvillard
Differential Revision: D5631191
fbshipit-source-id: 2082dfe
Summary: Other parts of the code where using the checks in the AndroidFramework module. It is better to have those things in one place.
Reviewed By: sblackshear
Differential Revision: D5654247
fbshipit-source-id: 2a783e7
Summary:
Calling exit at the end of a proc does not create unreachable code, prior to this commit inferbo reports that it does.
We extend collect_instrs to detect when we're at the end of a procedure in C and not report on unreachable code if we call a procedure there.
Reviewed By: mbouaziz
Differential Revision: D5623637
fbshipit-source-id: 0d5f326
Summary: This check is not possible in Java as it natirally happens in the totally legit case of the `try ... finally`.
Reviewed By: sblackshear
Differential Revision: D5568802
fbshipit-source-id: 24ca074
Summary:
Instead of a whitelist and blacklist and default issue types and default
blacklist and filtering, consider a simpler semantics where
1. checkers can be individually turned on or off on the command line
2. most checkers are on by default
3. `--no-filtering` turns all issue types on, but they can then be turned off again by further arguments
This provides a more flexible CLI and is similar to other options in the infer
CLI, where "global" behaviour is generally avoided.
Dynamically created checkers (eg, AL linters) cause some complications in the
implementation but I think the semantics is still clear.
Also change the name of the option to mention "issue types" instead of
"checks", since the latter can be confused with "checkers".
Reviewed By: jberdine
Differential Revision: D5583238
fbshipit-source-id: 21de476
Summary:
Every module declared but not used in the same source file is warned about
currently. Disable the noisy warning.
For instance, before this diff (and after "M-x merlin-restar-process"):
1. open AbstractInterpreter.ml
2. merlin shows a warning for `module Make` inside emacs
Reviewed By: jberdine
Differential Revision: D5621383
fbshipit-source-id: c175e5d
Summary:
Seeing rrors in "/foo/bar/src/base/infer.ml" is less distracting than seeing
errors in "/foo/bar/src/./base/infer.ml".
Reviewed By: jberdine
Differential Revision: D5621060
fbshipit-source-id: 55ee069
Summary:
The issue was as follows:
- ppx.exe depended on all the ocaml source files
- ppx.exe is an implicit prerequisit of all the (non-automatically-generated) build objects in jbuilder
- as a result, when modifying a source file, we would recompile ppx.exe, thus all the source files
ppx.exe only needs to depend on all the generated source files, so that
jbuilder can find them all.
Reviewed By: jberdine
Differential Revision: D5621007
fbshipit-source-id: 92c5b9c
Summary:
The `-index-store-path` argument does not exist in Clang 5.0 and it gets discarded without any error message. The problem is that its argument, a folder, is not discarded, and Clang considers it as a source file. This leads to the following errors:
- `cannot specify -o when generating multiple output files` (this happens if a `-o` argument is passed)
- `error reading '<PATH>'` (this can be observed when running the "normalized" version of the clang command, generated via the -### flag)
This weird case can be observed when `-index-store-path` is passed in a sequence like the following: `-x c -index-store-path <PATH> -c`.
With this change, we remove the `index-store-path` option, and its argument, from the original clang command.
Reviewed By: jvillard
Differential Revision: D5601808
fbshipit-source-id: 4200308
Summary:
This gives additional information to users. For instance:
```
--biabduction
Activates: the separation logic based bi-abduction analysis using
the checkers framework (Conversely: --no-biabduction)
This option is relevant to infer-analyze(1).
```
Reviewed By: sblackshear
Differential Revision: D5583197
fbshipit-source-id: 2960b90
Summary:
We previously lumped ownership predicates in with all other predicates. That limited us to a flat ownership domain.
This diff separates out the ownership predicates so we can have a richer lattice of predicates with each access path.
This lets us be more precise; for example, we can now show that
```
needToOwnBothParams(Obj o1, Obj o2) {
Obj alias;
if (*) { alias = o1; } else { alias = o2; }
alias.f = ... // both o1 and o2 need to be owned for this to be safe
}
void ownBothParamsOk() {
needToOwnBothParams(new Obj(), new Obj()); // ok, would have complained before
}
```
is safe.
Reviewed By: jberdine
Differential Revision: D5589898
fbshipit-source-id: 9606a46
Summary:
This makes it easier to test a single checker.
Also refactor the code to make it harder to mess up the list of default/all checkers.
Reviewed By: sblackshear
Differential Revision: D5583209
fbshipit-source-id: 7c919b2
Summary:
This makes the CLI more complete: before, it was often impossible to "go back"
once some options were passed, namely options produced by `mk_*_{list,opt}`.
Now these automatically create an accompanying `--<long>-reset` option that
resets the config variable to its default value.
Also unify our naming of `~meta` arguments:
- no more spaces in them (except one instance where it's a whole sentence)
- use `+foo` if `foo` can be specified multiple times
Reviewed By: dulmarod
Differential Revision: D5583187
fbshipit-source-id: a8c2567
Summary:
Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds:
```
times in 10ms, ±differences measured in speedups, 4 cores
| | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys |
|-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------|
| byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 |
| native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 |
| byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 |
| change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 |
| change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 |
| change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 |
| change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 |
| change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 |
| change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 |
#+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2
50 cores
| | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys |
|---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------|
| byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 |
| native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 |
| byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 |
#+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2
```
Menu:
1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in
some information at build-time (really, at configure time, but TODO), such as
whether or not clang is enabled.
2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file
3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help.
4. jbuilder does not support subdirectories, so resort to listing all the
source files in the generated jbuild (only source directories need to be
manually listed in jbuild.in though). Still, the generated .merlin is wrong
and makes merlin find source files in _build, so manually tune it to get
good merlin support. We also lose some of merlin for unit tests as it
cannot see their build artefacts anymore.
5. checkCopyright gets its own jbuild because it's standalone. Also, remove
some deprecation warnings in checkCopyright due to the new version of Core from
a while ago.
6. Drop less-used Makefile features (they had regressed anyway) such as
building individual modules. Also, building mod_dep.pdf now takes all the
source files available so they better build (before, it would only take the
source files from the config, eg with or without clang) (that's pretty minor).
7. The toplevel is now built as a custom toplevel because that was easier. It
should soon be even easier: https://github.com/janestreet/jbuilder/issues/210
8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about
interface files without implementations.
In particular, I did not try to migrate too much of the Makefile logic to jbuilder,
more can be done in the future.
Reviewed By: jberdine
Differential Revision: D5573661
fbshipit-source-id: 4ca6d8f
Summary:
The only path to the `MergeCaptured.slink` function is when we should merge, so
it doesn't make sense to check `Config.merge` again. In the case of `infer run
--flavors -- buck ...`, this would create regular symlinks instead of the much
faster multilinks.
Reviewed By: jberdine
Differential Revision: D5574020
fbshipit-source-id: df710ca
Summary:
Fix for the #669. Recursion problem has been reproduced (see the new doctest in the latest commit) and eliminated. I guess the new version will work faster too (no more unnecessary slicing).
Closes https://github.com/facebook/infer/pull/697
Reviewed By: sblackshear
Differential Revision: D5507925
Pulled By: jvillard
fbshipit-source-id: 21fa07b
Summary:
This is a needed step in the direction of making prenalysis functional: it will return a view of the CFG rather than mutating the CFG.
ProcCfg already works by providing a view on the underyling CFG, but the bi-abduction can't leverage this because it uses the "raw" CFG.
This diff does a partial swap of the raw CFG for an exceptional ProcCfg. The goal is to make sure the bi-abduction never calls `Procdesc.get_instrs`; it should use the `ProcCfg` wrapper instead.
That way, preanalyses that add instructions (like the liveness prenalysis) will work.
There's still some calls to `Procdesc.get_succs` etc., but we can remove those in a future diff.
They're not on the critical path because the current preanalyses only add instructions, not nodes or edges.
Reviewed By: jeremydubreil
Differential Revision: D5556387
fbshipit-source-id: 4ffda00
Summary:
Previous version was hard to understand because it was doing many things within same code. New version has different code for Arrays, Structs and others.
There is some copy-paste, but it's easier to follow code (open to suggestions though)
Reviewed By: dulmarod
Differential Revision: D5547999
fbshipit-source-id: 77ecb24
Summary: It wasn't using code from `std::vector::empty` which recently was improved. Instead of inlining `std::vector::empty`, call it to know whether vector is empty or not.
Reviewed By: jvillard
Differential Revision: D5573379
fbshipit-source-id: e024a42
Summary: Useful for identifying user-controlled array accesses that could lead to buffer overflows
Reviewed By: mbouaziz
Differential Revision: D5520985
fbshipit-source-id: 92984f6
Summary:
When a sink name is specified in `.inferconfig` or in OCaml, it might conflict with a function of the same name that has a different number of args.
We shouldn't try to create a sink in this case, and we definitely shouldn't crash.
Reviewed By: jeremydubreil
Differential Revision: D5561216
fbshipit-source-id: fa1859b
Summary: This is unused, as far as I can tell. If we want to revive it, we can do it in AL or as a simple checker; it certainly doesn't require the full might of bi-abduction.
Reviewed By: jeremydubreil
Differential Revision: D5556325
fbshipit-source-id: e3895c2
Summary:
Replace `inferTraceBugs` with `infer-explore` with a similar CLI. Some options changed:
- --max-level -> --max-nesting, and "max" is the default value instead of a possible value
- --no-source -> --no-source-preview
Reviewed By: mbouaziz
Differential Revision: D5526651
fbshipit-source-id: 8383f37
Summary:
In some cases we normalize expressions to check some facts about them. In these
cases, trying to keep as much information as possible in the expression, such
as the fact it comes from a `sizeof()` expression, is not needed. Doing
destructive normalization allows us to replace `sizeof()` by its
statically-known value.
closes#706
Reviewed By: mbouaziz
Differential Revision: D5536685
fbshipit-source-id: cc3d731
Summary: A temporary workaround until we can understand why this happens and fix it.
Reviewed By: jeremydubreil
Differential Revision: D5559838
fbshipit-source-id: dc86eb9
Summary: That was too noisy. Propagate `--quiet` to the Python reporting hook so as to still emit bugs.txt and so on.
Reviewed By: martinoluca
Differential Revision: D5501106
fbshipit-source-id: 63b6451
Summary:
This allows the user to specify a different command to build the current version of the project vs to build the previous version of the project. Here's an example:
```
infer diff --gen-previous-build-command-script "echo clang -c hello.c" ... -- clang -c hello2.c
```
By default the two build commands are the same. If the script is to be used for both the current and the previous versions, then it's on the user to run it once first, eg:
```
infer diff --gen-previous-build-command-script "./myscript.sh previous" ... -- $(./myscript.sh current)
```
Reviewed By: martinoluca
Differential Revision: D5500989
fbshipit-source-id: 7374b44
Summary: Working on making CFG immutable by killing refs to functions that mutate them. This is an easy one because it doesn't do anything :).
Reviewed By: jeremydubreil, mbouaziz
Differential Revision: D5551521
fbshipit-source-id: bec76a9
Summary:
Record the list of access paths (if any) used in the index expression for each array access.
This will make it possible to use array accesses as sinks in Quandary
Reviewed By: jeremydubreil
Differential Revision: D5531356
fbshipit-source-id: 8204909
Summary:
Do not use the deprecated (and slower) `#infer` flavor. Instead, `infer-run`
runs capture with the `#infer-capture-all` flavor, followed by merging targets,
followed by the analysis.
Move the call to `MergeCapture` around to make this change easier.
Reviewed By: mbouaziz
Differential Revision: D5547199
fbshipit-source-id: 53c9996
Summary:
With current model, there are issues with cxx range loop. It looks like
it comes from std::vector::size model.
example of such FP:
```
int t = vec.size();
for(auto& elem : vec) {
auto x = elem
}
```
Reviewed By: jvillard
Differential Revision: D5545914
fbshipit-source-id: fbe55b3
Summary: Those are not particularly relevant for the biabduction analysis. It would be easy to have a dedicated checker for this if we happen to need one day.
Reviewed By: sblackshear
Differential Revision: D5530834
fbshipit-source-id: 316e60f
Summary:
The Eradicate `Nullable` checker should now be run using:
infer -a checkers --eradicate ...
Reviewed By: mbouaziz
Differential Revision: D5529226
fbshipit-source-id: 0de2956
Summary:
It's nice to have "raw" as the default kind of access path, since it's used much more often than the abstraction.
This is also a prereq for supporting index expressions in access paths, since we'll need mutual recursion between accesses and access paths.
Reviewed By: jeremydubreil
Differential Revision: D5529807
fbshipit-source-id: cb3f521
Summary:
This is unsound but will help the analysis to report less false alarms with the common pattern:
if (a.get() != null) {
a.get().foo();
}
Reviewed By: sblackshear
Differential Revision: D5528227
fbshipit-source-id: 750db4a
Summary:
Previously, only the bug type + file name (up to renaming) were taken into
account, which was too coarse. The key is file-independent and provides
additional signal.
Reviewed By: martinoluca
Differential Revision: D5536858
fbshipit-source-id: 70b732b
Summary: This was reusing the side effects of the `add_constraints_on_retval` for the final purpose of being angelic and just assigning a fresh value to the lhs of the load.
Reviewed By: sblackshear
Differential Revision: D5507037
fbshipit-source-id: ec1c89c
Summary: D5526683 assumed that this was the case, and broke the report hook.
Reviewed By: martinoluca
Differential Revision: D5527353
fbshipit-source-id: 2e169b9
Summary:
Bumps facebook-clang-plugins to a version that outputs sizeof() info in bytes and not bits.
update-submodule: facebook-clang-plugins
Reviewed By: akotulski
Differential Revision: D5526747
fbshipit-source-id: 6019542
Summary:
Cosmetic changes to the output of `make clean` and `make test-replace`.
Run the inferTraceBugs tests from tests/build_systems/ like other such e2e
tests, so that they can run in parallel with other tests instead of
sequentially at the end.
Reviewed By: dulmarod
Differential Revision: D5526599
fbshipit-source-id: 57231bd
Summary:
Works the same way as read/write races on fields, except that are more relaxed (er, unsound) in deciding whether two containers may alias.
This is needed to avoid reporting a ton of FP's; full explanation in comments.
Reviewed By: da319
Differential Revision: D5493404
fbshipit-source-id: 0a5d8b1
Summary:
This was hardcoded but it's passed as an option to the script. It can be useful to generate text reports from arbitrary json reports, eg:
./infer/lib/python/report.py --issues-json infer-out/report.json --project-root . --results-dir infer-out --issues-txt foo.txt
Reviewed By: martinoluca
Differential Revision: D5526683
fbshipit-source-id: 3f9c3ee
Summary: This seems more in line with the expectations of the JSON format.
Reviewed By: mbouaziz
Differential Revision: D5500939
fbshipit-source-id: 76dcc47
Summary: This used to be in a different module but now that `driver_mode` is in `Driver` it should really be called `Driver.mode`.
Reviewed By: mbouaziz
Differential Revision: D5499575
fbshipit-source-id: ab96473
Summary: Automatically set --reactive because the diff analysis will be faster that way.
Reviewed By: jeremydubreil
Differential Revision: D5499443
fbshipit-source-id: 1a35cee
Summary:
This was an oversight. The prologue has to be run before capture and analysis
(see eg Infer.run). This sets up a bunch of things that are useful for the
diff analysis as well.
Reviewed By: jeremydubreil
Differential Revision: D5499405
fbshipit-source-id: 8f339cf
Summary:
If -fembed-bitcode is passed, it leads to multiple cc1 commands, which
try to read .bc files that don't get generated, and fail. So pass
-fembed-bitcode=off to disable.
Reviewed By: martinoluca
Differential Revision: D5516879
fbshipit-source-id: 478057a
Summary:
If you run `infer report --issues-txt ilovecats.txt ...` then bugs may mysteriously miss from `ilovecats.txt`, unless you flush. (See rules of thumb for `Format` module.)
Closes https://github.com/facebook/infer/pull/694
Reviewed By: mbouaziz
Differential Revision: D5442335
Pulled By: jvillard
fbshipit-source-id: 73272a0
Summary:
The python scripts support this option but don't do anything with it. Note:
This doesn't remove support for android harnesses.
Reviewed By: sblackshear
Differential Revision: D5501019
fbshipit-source-id: 14c4e3f
Summary: The `--failures-allowed` was doing for the Clang frontend what `--keep-doing` was doing for the backend. This revision merges the two options to simplify the Infer CLI and our tests.
Reviewed By: jvillard
Differential Revision: D5474347
fbshipit-source-id: 09bcea4
Summary:
update-submodule: facebook-clang-plugins
Moving to a newer version of clang, see ffb5dd0114
Reviewed By: jvillard
Differential Revision: D5452529
fbshipit-source-id: 28bc215
Summary:
Better to bail early than have mysterious failures. These used to have the wrong error messages:
```
$ cd examples/android_hello/
$ infer -- ./gradlew rubbish
Capturing in gradle mode...
Running and capturing gradle compilation...
10:46:56.730 [ERROR] [org.gradle.internal.buildevents.BuildExceptionReporter]
10:46:56.730 [ERROR] [org.gradle.internal.buildevents.BuildExceptionReporter] FAILURE: Build failed with an exception.
10:46:56.730 [ERROR] [org.gradle.internal.buildevents.BuildExceptionReporter]
10:46:56.730 [ERROR] [org.gradle.internal.buildevents.BuildExceptionReporter] * What went wrong:
10:46:56.730 [ERROR] [org.gradle.internal.buildevents.BuildExceptionReporter] Task 'rubbish' not found in root project 'android_hello'.
10:46:56.730 [ERROR] [org.gradle.internal.buildevents.BuildExceptionReporter]
10:46:56.730 [ERROR] [org.gradle.internal.buildevents.BuildExceptionReporter] * Try:
10:46:56.730 [ERROR] [org.gradle.internal.buildevents.BuildExceptionReporter] Run gradlew tasks to get a list of available tasks. Run with --stacktrace option to get the stack trace.
Nothing to compile. Try running `./gradlew clean` first.
ERROR: (Unix.Exit_or_signal (Exit_non_zero 66))
$ cd -
$ infer --flavors --Xbuck --keep-going -- buck build //toto:toto
Capturing in buck mode...
moving files in buck-out to buck-out/.trash/buck-outwiiL6N
Not using buckd because watchman isn't installed.
BUILD FAILED: No build file at toto/BUCK when resolving target //toto:toto#infer.
Buck failed, but continuing the analysis because --keep-going was passed
Not using buckd because watchman isn't installed.
No build file at toto/BUCK when resolving target //toto:toto#infer.
Traceback (most recent call last):
File "/home/jul/infer/infer/bin/../lib/python/infer.py", line 186, in <module>
main()
File "/home/jul/infer/infer/bin/../lib/python/infer.py", line 168, in main
capture_exitcode = imported_module.gen_instance(args, cmd).capture()
File "/home/jul/infer/infer/lib/python/inferlib/capture/buck.py", line 89, in capture
return self.capture_with_flavors()
File "/home/jul/infer/infer/lib/python/inferlib/capture/buck.py", line 242, in capture_with_flavors
result_paths = self._get_analysis_result_paths()
File "/home/jul/infer/infer/lib/python/inferlib/capture/buck.py", line 148, in _get_analysis_result_paths
out = [x.split(None, 1)[1] for x in buck_output.strip().split('\n')]
IndexError: list index out of range
ERROR: (Unix.Exit_or_signal (Exit_non_zero 1))
$ cd infer/build_systems/ant/ && infer -- ant rubbish
Capturing in ant mode...
BUILD FAILED
Target "rubbish" does not exist in the project "null".
at org.apache.tools.ant.Project.tsort(Project.java:1929)
at org.apache.tools.ant.Project.topoSort(Project.java:1837)
at org.apache.tools.ant.Project.topoSort(Project.java:1800)
at org.apache.tools.ant.Project.executeTarget(Project.java:1376)
at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
at org.apache.tools.ant.Project.executeTargets(Project.java:1260)
at org.apache.tools.ant.Main.runBuild(Main.java:857)
at org.apache.tools.ant.Main.startAnt(Main.java:236)
at org.apache.tools.ant.launch.Launcher.run(Launcher.java:287)
at org.apache.tools.ant.launch.Launcher.main(Launcher.java:113)
Total time: 0 seconds
Nothing to compile. Try running `ant clean` first.
ERROR: (Unix.Exit_or_signal (Exit_non_zero 66))
```
Now we fail better, for instance:
```
$ infer --flavors --Xbuck --keep-going -- buck build //toto:toto
Capturing in buck mode...
moving files in buck-out to buck-out/.trash/buck-outHag8Ji
Not using buckd because watchman isn't installed.
BUILD FAILED: No build file at toto/BUCK when resolving target //toto:toto#infer.
Buck failed, but continuing the analysis because --keep-going was passed
Not using buckd because watchman isn't installed.
No build file at toto/BUCK when resolving target //toto:toto#infer.
ERROR: (Unix.Exit_or_signal (Exit_non_zero 70))
$ cd infer/build_systems/ant/ && infer -- ant rubbish
Capturing in ant mode...
BUILD FAILED
Target "rubbish" does not exist in the project "null".
at org.apache.tools.ant.Project.tsort(Project.java:1929)
at org.apache.tools.ant.Project.topoSort(Project.java:1837)
at org.apache.tools.ant.Project.topoSort(Project.java:1800)
at org.apache.tools.ant.Project.executeTarget(Project.java:1376)
at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
at org.apache.tools.ant.Project.executeTargets(Project.java:1260)
at org.apache.tools.ant.Main.runBuild(Main.java:857)
at org.apache.tools.ant.Main.startAnt(Main.java:236)
at org.apache.tools.ant.launch.Launcher.run(Launcher.java:287)
at org.apache.tools.ant.launch.Launcher.main(Launcher.java:113)
Total time: 0 seconds
ERROR: couldn't run compilation command `['ant', '-verbose', u'rubbish']`
ERROR: (Unix.Exit_or_signal (Exit_non_zero 1))
```
Reviewed By: jeremydubreil
Differential Revision: D5469607
fbshipit-source-id: a3eb05c
Summary:
The way we represented container writes before was pretty hacky: just use a dummy field for the name of the method that performs the container write.
This diff introduces a new access kind for container writes that is much more structured.
This will make it easier to soundly handle aliasing between containers and support container reads in the near future.
Reviewed By: da319
Differential Revision: D5465747
fbshipit-source-id: e021ec2
Summary: Using a dedicated abstract domain, like Quandary does, is more suitable for taint analysis.
Reviewed By: sblackshear
Differential Revision: D5473794
fbshipit-source-id: c917417
Summary: Because making a diff which breaks the tests because it silently fails to create the right posts for the models is notoriously hard to debug
Reviewed By: sblackshear
Differential Revision: D5471611
fbshipit-source-id: ef04539
Summary:
Both `stringWithUTF8String` and `stringWithString` implements copy semantics that copies the content of their parameter into a newly allocated buffer. We modeled this as pointer assignment in the past, which means that once we write
```
NSString* foo() {
char buf[...];
...
return [NSString stringWithUTF8String:buf];
}
```
We are going to get a spurious stack variable address escape report because local pointer `buf` is assigned to the newly created string and the string gets returned.
This diff tries to address the issue by heap-allocating a buffer and `memcpy` the contents in `stringWithUTF8String` and `stringWithString`. But this change will create another problem: the allocated buffer will be reported as leaked by the backend, while in reality those buffers won't actually be leaked as they are allocated in a region that will be periodically autoreleased. To suppress spurious memory leak FPs, I added another attribute `Awont_leak` that will suppress the leakage report on any expressions that get tagged with it.
Reviewed By: jeremydubreil
Differential Revision: D5403084
fbshipit-source-id: df6de7f
Summary: This gives us more expressive power when defining sources--we can use heuristics like "`foo(o)` only returns a source when `o` is not a constant".
Reviewed By: jvillard
Differential Revision: D5467935
fbshipit-source-id: f3d581d
Summary: This should make it faster to use embarassingly big regexps in AL.
Reviewed By: mbouaziz
Differential Revision: D5462938
fbshipit-source-id: 0431730
Summary:
Pretty basic: warn when we see an assignment instruction `x = ...` and `x` is not live in the post of the instruction.
Only enabled for Clang at the moment because linters already warn on this for Java. But we can enable it later if we want to (should be fully generic).
Reviewed By: jeremydubreil
Differential Revision: D5450439
fbshipit-source-id: 693514c
Summary:
oops_house
This was introduced when upgrading Core, as `Unix.readdir` became deprecated in
favour of `Unix.readdir_opt` but the exception-based logic was left unchanged.
Reviewed By: mbouaziz
Differential Revision: D5461353
fbshipit-source-id: c0994c3
Summary:
Phony dependencies are not good for incrementality. Retain the nice
factorization of code introduced by D5415318 but depend directly on the
relevant files instead of the phony target.
Reviewed By: mbouaziz
Differential Revision: D5461188
fbshipit-source-id: 069519b
Summary: Making it simple to add a new access type for "un-annotated interface call" in an upcoming diff.
Reviewed By: da319
Differential Revision: D5445914
fbshipit-source-id: f29e342
Summary: We get the wrong answer on most of them for now, but that is expected
Reviewed By: ngorogiannis
Differential Revision: D5429242
fbshipit-source-id: 4899079
Summary:
The previous version
- assumed that `infer` was in `PATH`
- would pick any old `infer` in `PATH` and not necessarily the right version
Reviewed By: mbouaziz
Differential Revision: D5433624
fbshipit-source-id: a59be3d
Summary: Long lists will be broken into lines rather than stretch out on a single line.
Reviewed By: jvillard
Differential Revision: D5424323
fbshipit-source-id: 115f16a
Summary:
This commit avoids precision loss on pruning.
// x -> [s$1, s$2]
if(x) { ... }
// x -> ?
before: x -> [min(0, s$1), max(0, s$2)]
because two x values, [0, 0] (true case) and [s$1, s$2] (false case), were joined after the if branch.
after: x -> [s$1, s$2]
Reviewed By: mbouaziz
Differential Revision: D5431009
fbshipit-source-id: 14a9efe
Summary:
Infer is only using clang's AST which means it can ignore flags passed to LLVM backend via `-mllvm` flag.
It will make it easier to maintain compatibility between different versions of clang/LLVM (ie. when flag is not available in LLVM used by infer)
Reviewed By: jvillard
Differential Revision: D5423685
fbshipit-source-id: a9de681
Summary: Changing .inferconfig can change the analysis results, so we want the cache to get invalidated when .inferconfig changes.
Reviewed By: jeremydubreil
Differential Revision: D5419734
fbshipit-source-id: 01ad874
Summary:
This just makes the warnings silent for now. We may improve the analysis to check if the null check on the captured fields are consistent with the annotation on the corresponding parameters.
Eradicate also has the same issue. I added a test to outline this. The biabduction analysis will also probably fail on the same of annotation lookup. We may want implement the proper fix at the level of `Annotation.field_has_annot`.
Reviewed By: sblackshear
Differential Revision: D5419243
fbshipit-source-id: 6460de8
Summary: This way, if infer crashes then the log files will be available for inspection, but if it succeeds we still get rid of the (non-deterministic) logs before Buck caches the results.
Reviewed By: sblackshear
Differential Revision: D5416032
fbshipit-source-id: 22e58be
Summary:
Fixes 2 issues with the build:
- The OCaml dependencies (Version.ml, atdgen-generated stuff, ...) would be generated twice when running `make -j test` from a clean tree, because `make` has no inter-Makefile visibility over common dependencies.
- We would run `atdgen` twice: once for the .ml, once for the .mli, even though one invocation is enough for both.
Add `make ocaml_clean` to nuke only the OCaml code (in particular because
rebuilding the C++ code in the plugin is slow when all I want to get rid of the
OCaml stuff).
Reviewed By: mbouaziz
Differential Revision: D5415318
fbshipit-source-id: 16f42c6
Summary:
First steps towards implementing diff analysis functionalities inside infer
itself. What works: run infer, checkout parent, re-run infer, checkout top
revision, compute the reportdiff (but no final surfacing on the console). Lots
of TODO still, inlined in the code.
Reviewed By: jberdine
Differential Revision: D5364226
fbshipit-source-id: 5b7f9a5
Summary:
Allowing the user to configure where to store the JSON report is asking for
trouble. In fact, some places in the code hardcoded "results.json" anyway.
Someone wanting to have results.json somewhere else can still copy report.json
once infer has run.
Reviewed By: jberdine
Differential Revision: D5415079
fbshipit-source-id: 9439cb6
Summary:
This reverts commit 7177bb6b8af1404fde408ead4750ef48ed9bdaff.
In practice, `extract_filepath` exhausts the call stack, leading to "RuntimeError: maximum recursion depth exceeded" exceptions. Perhaps a loop needs to be used instead.
Reviewed By: jvillard
Differential Revision: D5409892
fbshipit-source-id: 09ccccd
Summary: CFG nodes were not connected and some instructions ended up in wrong place. Fix those issues
Reviewed By: dulmarod
Differential Revision: D5406720
fbshipit-source-id: 2a70e1a
Summary: Introduce `Logging.die` to try and exit with consistent error codes depending on what failed.
Reviewed By: mbouaziz
Differential Revision: D5406642
fbshipit-source-id: 25d98fc
Summary: This will allow us to gradually get rid of the exceptions thrown during the analysis while detecting the regressions earlier
Reviewed By: jberdine, jvillard
Differential Revision: D5385154
fbshipit-source-id: 605e3f5
Summary:
Problem: The analyzer did not know that the value of `v.size()` is an alias of `v.infer_size`, so `v.infer_size` is not pruned by the if condition. As a result it raises a false alarm.
void safe_access(std::vector<int> v) {
if (v.size() >= 10) {
v[9] = 1; // error: BUFFER_OVERRUN Offset: [9, 9] Size: [5, 5]
}
}
void call_safe_access_Good() {
std::vector<int> v(5, 0);
safe_access(v);
}
Solution: Adding alias for return value to the abstract domain.
Now Inferbo can prune `v.infer_size` because it knows that the value of `v.size()` is an alias of `v.infer_size`. There is already an alias domain in Inferbo, so we added a specific room for the retrun value.
Reviewed By: jvillard, mbouaziz
Differential Revision: D5396988
fbshipit-source-id: 4a4702c
Summary:
1. Allow it to forward -version calls to javac (so that if the build system wants
to check the compiler version it doesn't end up with Infer's version)
2. Preserve empty arguments:
javac -bootclasspath "" -classpath a.jar ...
currently gives:
javac: invalid flag: a.jar
Closes https://github.com/facebook/infer/pull/688
Differential Revision: D5406058
Pulled By: jvillard
fbshipit-source-id: 7fa1bcf
Summary:
Conversion and reformat of infer source using ocamlformat
auto-formatting tool.
Current status:
- Because Reason does not handle docstrings, the output of the
conversion is not 'Warning 50'-clean, meaning that there are
docstrings with ambiguous placement. I'll need to manually fix
them just before landing.
Reviewed By: jvillard
Differential Revision: D5225546
fbshipit-source-id: 3bd2786
Summary:
Add support for converting without actually converting. To be used as
a landing pad for rebasing over the conversion.
Reviewed By: jvillard
Differential Revision: D5379967
fbshipit-source-id: 1bd932d
Summary: Adding to the Quandary tests, the list of tests that are already working for the bi-abduction based taint analysis.
Reviewed By: sblackshear
Differential Revision: D5395734
fbshipit-source-id: c4f2e79
Summary:
Error'ing when getting several subcommands on the command line only makes sense
when the user typed these options herself. This was causing a bug in the Gradle
integration, and possibly others (see GitHub issue).
Fixes#668
Reviewed By: jeremydubreil
Differential Revision: D5381850
fbshipit-source-id: f332377
Summary:
Fixes#683
Disclaimer: I don't know what XML namespaces/namespace prefixes are, but this seems to do the trick.
Reviewed By: mbouaziz
Differential Revision: D5381480
fbshipit-source-id: 3da16e7
Summary: This will allow to replace type vars into concrete types in expressions.
Reviewed By: jvillard, mbouaziz
Differential Revision: D5209276
fbshipit-source-id: c1650f8
Summary:
The thread safety domain manipulates access paths that are a variable
followed by a sequence of field or index accesses. Some expressions
from C++ code do not fit that form, such as cases where subtraction of
an offset from a pointer is used to obtain another pointer, whose
fields are then accessed. Previously the analyzer would crash on such
expressions. This diff partially treats them by introducing dummy
variables.
Reviewed By: da319
Differential Revision: D5343567
fbshipit-source-id: f73b520
Summary:
:
because otherwise people would believe they can use the internal representation of these std lib but it fails for our models.
Reviewed By: jvillard
Differential Revision: D5368671
fbshipit-source-id: 4e53d5a
Summary: So that it get rebuilt. Test is clang_compilation_db_relpath
Reviewed By: mbouaziz
Differential Revision: D5364561
fbshipit-source-id: 8cae984
Summary:
:
Get rid of model location in reports.
The goal is to avoid changing `issues.exp` whenever a model is updated.
Reviewed By: jvillard
Differential Revision: D5356608
fbshipit-source-id: 88ecaba
Summary: This could generate enormous amounts of logs on medium-sized projects (eg rocksdb) when running with `--stats`. Review other debug levels in inferbo as well.
Reviewed By: mbouaziz
Differential Revision: D5364139
fbshipit-source-id: 5c8d206
Summary:
In C++ it may happen that a procedure return 'variable' is an access
path that cannot be translated to Hil. For now just skip these instead
of crashing.
Reviewed By: mbouaziz
Differential Revision: D5356134
fbshipit-source-id: 977dfba
Summary:
They are expected to occur in C++ code, so don't fail on them. For now
just skip them, although a better treatment of dynamic dispatch may be
needed later.
Reviewed By: da319, mbouaziz
Differential Revision: D5292462
fbshipit-source-id: 4285514
Summary:
Indexing into a string literal expression would generate a fresh
variable on every application of a transformer. This violated
finiteness of the domain, and caused divergence.
Reviewed By: da319
Differential Revision: D5342951
fbshipit-source-id: e95e84e
Summary: It was passing the argument multiple times rather than once with all the accepted values
Reviewed By: jvillard
Differential Revision: D5338509
fbshipit-source-id: 22b86a5
Summary: This is useful when we only want to examine the html for some but not all source files.
Reviewed By: jvillard
Differential Revision: D5334786
fbshipit-source-id: 774c23c
Summary:
It instantiates fields of structures when a pointer to which is given
as a function parameter, e.g., `foo(&s);`.
Reviewed By: mbouaziz, jvillard
Differential Revision: D5337645
fbshipit-source-id: c06da29
Summary: Rename historical option to its new form, since the old form was no longer accepted by infer.
Reviewed By: martinoluca
Differential Revision: D5329033
fbshipit-source-id: 4fa9402
Summary:
We keep track of both `beginPtr` and `endPtr` but the modelling was mostly
about `beginPtr` as some sort of approximation I guess. This shouldn't change
much but will be useful later when doing more iterator stuff.
Reviewed By: mbouaziz
Differential Revision: D5255772
fbshipit-source-id: 0f6e3e8
Summary:
This will be needed to re-use the functions now in Driver.ml in other contexts
without always adding to infer.ml. For instance, this is used in a later diff
to do a diff-analysis orchestrator that needs to run the capture and analysis
several times.
Reviewed By: jberdine
Differential Revision: D5319862
fbshipit-source-id: caf9551
Summary: Needed in a later diff to be able to compute the set of changed files *during* an infer execution.
Reviewed By: jberdine
Differential Revision: D5319667
fbshipit-source-id: 226ec91
Summary: This seems to move in the right direction. Also, `const operator[]` did not do an `access_at`, which I fixed.
Reviewed By: mbouaziz
Differential Revision: D5320427
fbshipit-source-id: c31c5ea
Summary: Unknown library returns the unknown pointer as well as the top interval.
Reviewed By: mbouaziz, jvillard
Differential Revision: D5282669
fbshipit-source-id: 34c7e18
Summary:
Thanks to the logging introduced in D5293334 (or because of, depending on your liking of spam), I noticed that there lots of errors being logged of the form
Couldn't read multilink file '/home/jul/infer/infer/tests/codetoanalyze/cpp/errors/infer-out/attributes/d0/multilink.txt': /home/jul/infer/infer/tests/codetoanalyze/cpp/errors/infer-out/attributes/d0/multilink.txt: No such file or directory
I don't think it makes sense to care about multilink files except when `--merge` is specified.
Also introduced a .mli and self-documented a function.
Reviewed By: akotulski
Differential Revision: D5310129
fbshipit-source-id: c3a6276
Summary:
Once the fixed/preexisting/introduced sets have been computed, they endure
further filtering which may decide that more of them are equal. These bugs just
get dropped on the floor. Put these into preexisting as well instead, at least
in the case of the "skip_duplicated_types_on_filenames" filter.
Reviewed By: martinoluca
Differential Revision: D5274248
fbshipit-source-id: 99b3f3d
Summary:
This diff tries to achieve the followings: if we have the following C++ codes:
```
bool foo(int x, int y) {
return &x == &y;
}
```
We want the C++ frontend to emit Sil as if the input is written as
```
bool foo(int x, int y) {
if (&x == &y) return 1; else return 0;
}
```
This matches the behavior of our Java frontend.
The reason why we prefer an explicit branch is that it will force the backend to eagerly produce two different specs for `foo`. Without the explicit branch, for the above example the backend would produce one spec with `return = (&x == &y)` as the post condition, which is not ideal because (1) we don't want local variables to escape to the function summary, and (2) with the knowledge that no two local variables may alias each other, the backend could actually determines that `&x == &y` is always false, emitting a more precise postcondition `return = 0`. This is not possible if we do not eagerly resolve the comparison expression.
Reviewed By: akotulski
Differential Revision: D5260745
fbshipit-source-id: 6bbbf99
Summary:
:
There are throw wrapper functions like `std::__throw_bad_alloc()` defined in both libstdc++ (https://github.com/gcc-mirror/gcc/blob/master/libstdc%2B%2B-v3/include/bits/functexcept.h) and libc++ (e.g. 907c1196a7/include/new (L145)). Folly actually exports some of them as well (diffusion/FBS/browse/master/fbcode/folly/portability/BitsFunctexcept.h). The function body of those wrappers merely throws the corresponding exception. My understanding is that the primary purpose of the wrappers is to throw the exception if everything goes well and to fall back to something reasonable when exception is disabled (e.g. when `-fno-exceptions` is passed to the compiler).
The problem is that infer doesn't really understand what those functions do, and I've seen some false positives get reported as a result of it. So to remove those FPs we need to either model them or handle them specially. Modeling those wrappers by either whitelisting them or overriding the include files turns out to be difficult, as those wrappers are only declared but not defined in the STL headers. Their implementations are not available to Infer so whitelisting them does nothing, and if I provide custom implementations in the headers then normal compilation process will be disrupted because the linker would complain about duplicated implementation.
What I did here is to replace functions whose name matches one of the throw wrapper's name with a `BuiltinDecls.exit`. I have to admit that this is a bit hacky: initially I was trying to do something more general: replacing functions with `noreturn` attribute with `BuitinDecls.exit`. That did not work because, CMIIW, the current frontend only exports function attributes for functions with actual bodies, not declaration-only functions. I'd love to be informed if there are better ways to handle those wrappers.
Reviewed By: jeremydubreil
Differential Revision: D5266030
fbshipit-source-id: 4580227
Summary:
:
Do not store dummy `_` into the stack.
This makes debugging a lot easier
Reviewed By: skcho
Differential Revision: D5275941
fbshipit-source-id: ce329a5
Summary:
:
What is relevant for the Buck integration is not the list of bugs that we find in a single target, which is essentially identical to testing `infer -- javac ...`, but to make sure that we still find the issues that are involving several Buck targets, and later other things like the caching mechanism.
This should also make the tests faster.
Reviewed By: jberdine, jvillard
Differential Revision: D5250205
fbshipit-source-id: 7f66b68
Summary:
I changed the link, so that now it works.
Closes https://github.com/facebook/infer/pull/666
Differential Revision: D5256662
Pulled By: dulmarod
fbshipit-source-id: 5ae622d
Summary: This change introduces the a new argument that lets you restrict the results of a differential report to only certain files.
Reviewed By: mbouaziz
Differential Revision: D5236626
fbshipit-source-id: 52711e9
Summary: Looks much less confusing when C++ templates with `<stuff>` are involved.
Reviewed By: mbouaziz
Differential Revision: D5255551
fbshipit-source-id: f4a93e6
Summary:
After D5245416 I was taking a closer look and decided it's best to get rid of the `Interprocedural` module altogether.
Since jeremydubreil's refactoring to pass the summaries around everywhere, this module doesn't do much (it used to make sure the summary actually got stored to disk).
Client code is shorter and simpler without this module.
Reviewed By: mbouaziz
Differential Revision: D5255400
fbshipit-source-id: acd1c00
Summary:
Only one instance will win in the end so it's not useful to double register.
Log when that happens. Currently it happens in the Java tests on
`InferBuiltins` but I don't understand why so I left it alone.
Reviewed By: jberdine
Differential Revision: D5217928
fbshipit-source-id: dc7ccca