Summary: This will be needed to generate man pages with an accurate date.
Reviewed By: jberdine, mbouaziz
Differential Revision: D4937498
fbshipit-source-id: b5ebd31
Summary:
As an interprocedural checker, SIOF should not run unless explicitly required.
Make it a new type of analyzer like other similar checkers.
Reviewed By: mbouaziz
Differential Revision: D4937820
fbshipit-source-id: a9e2d38
Summary: `bufferoverrun` is not part of `checkers` yet so bufferoverrun tests require their own Makefile
Reviewed By: jvillard
Differential Revision: D4937558
fbshipit-source-id: 20380f1
Summary:
Try to read .inferconfig in the current directory, then in .., then in ../..,
etc. This can be overriden with the `INFERCONFIG` environment variable.
This removes the need for two-phase parsing, so clean up that code too.
Paths in .inferconfig are interpreted relative to where .inferconfig is located.
This does not apply to other path-sensitive things like regexpes... this is not
a show stopper because regexpes can account for the fact that infer may be
called from different project roots.
Make sure we fail when .inferconfig exists but cannot be read.
Reviewed By: jberdine
Differential Revision: D4843142
fbshipit-source-id: 340a63f
Summary:
We shouldn't encourage contributors to run only a subset of the tests with
`make test`, but it's more helpful to complain clearly should they try to do
so.
Now `make test` will ensure that both the clang and the Java analyzers are
enabled, otherwise it will refuse to run and suggest to run `make config_tests`
instead.
It can still be useful to be able to run only the Java or Clang tests. The diff
also fixes the cases where that previously failed.
Fixes#634
Reviewed By: jberdine
Differential Revision: D4826515
fbshipit-source-id: 4b76029
Summary:
Nuking the specs then building the models was not a great idea: the models do
not look at specs but only at some dummy marker files, eg
infer/lib/specs/c_models, so they don't necessarily realize that they need to
be rebuilt when the specs have been nuked!
One easy workaround would be to also delete the marker files, but then we would
*always* rebuild the models when building infer. Not good.
The solution here is to nuke the specs and marker files only when the clang
dependencies change, then rebuild all the models.
Reviewed By: jberdine, jeremydubreil
Differential Revision: D4781424
fbshipit-source-id: 2d2606e
Summary:
We shouldn't install byte-executables unless the user types `make byte`.
Othewise everything gets very slow and the cause is not obvious.
Reviewed By: jeremydubreil
Differential Revision: D4779135
fbshipit-source-id: 757bfa2
Summary:
It can be useful when debugging infer or the Makefiles themselves to see what
`make` is doing. Instead of editing Makefiles to remove `@` now you can `make
VERBOSE=1`.
This is just `git ls-files | grep -e Makefile -e '.*\.make' | xargs sed -e 's/^\t@/\t$(QUIET)/' -i`, and adding the definition of `QUIET` to Makefile.config.
Reviewed By: jeremydubreil
Differential Revision: D4779115
fbshipit-source-id: e6e4642
Summary:
Most of our tests work by comparing the output of some command to a baseline
expected output. It's often needed to update that baseline.
Previously, that was crudely done by attempting to move every foo.exp.test file
to foo.exp. This does not work terribly well, in particular because
foo.exp.test might be stale.
Instead, add a `replace` target to every test that knows how to update the
baseline. This allows custom behaviours too, eg in the differential tests.
Most of the tests include base.make or differential.make, so add a replace target
there. A few tests are completely custom, add a replace target to them too.
Reviewed By: jeremydubreil
Differential Revision: D4754279
fbshipit-source-id: ec34273
Summary:
Sometimes building the models segfaults mysteriously. I've observed in the
latest instance that `make -C infer/models clean` solved the issue so this is
likely a good idea.
Reviewed By: mbouaziz
Differential Revision: D4745924
fbshipit-source-id: cdb50d8
Summary:
This removes the dependency of libffi, and gives better guarantees at
compile-time. A bit overkill to retrieve the width of the terminal but what do
you know...
Reviewed By: jberdine
Differential Revision: D4700003
fbshipit-source-id: 036989b
Summary:
Two issues in the previous code:
1. We'd just tack on `#compilation-database` so if there already are `#flavors`
in a Buck target then we get a malformed `#flavors#compilation-database`
instead of `#flavors,compilation-database`. There's already code to deal
with that for other flavors (`#infer-capture-all`), so extend and reuse that.
2. The code didn't work if there are spaces in target names (sigh). Harden the
code a bit so that it works. Unfortunately Buck doesn't escape spaces at all
in its `buck targets --show-output` output, so the parsing still relies on
there being no spaces in flavors to work correctly. Sample output:
```
$ buck targets --show-full-output //clang_compilation_database:Hel\ lo#compilation-database
Not using buckd because watchman isn't installed.
[+] PROCESSING BUCK FILES...0.1s [100%] 🐳 New buck daemon
//clang_compilation_database:Hel lo#compilation-database /home/jul/infer/infer/tests/build_systems/codetoanalyze/buck-out/gen/clang_compilation_database/__Hel lo#compilation-database.json
```
Also, some code in codetoanalyze/clang-compilation-database/ didn't compile, so
fix that.
Reviewed By: dulmarod
Differential Revision: D4714338
fbshipit-source-id: b8ae324
Summary:
This makes sure that one can run `./build-infer.sh` then `make`. Otherwise it's
not always clear what one should do to recompile infer, eg when `make` will
work and when `./build-infer.sh` should be used instead, in particular when the
user doesn't have opam configured for her terminal.
Reviewed By: jberdine
Differential Revision: D4698159
fbshipit-source-id: 5df8059
Summary:
There is no point in attaching plugin to `clang -E` calls since they don't produce any AST.
Same applies to `-M`, `-MM`, etc. (but not `-MD` nor `-MMD`).
Reviewed By: jvillard
Differential Revision: D4681618
fbshipit-source-id: 7a76add
Summary: We had our own mechanism for saving `./configure` flags, which does not work if flags contain whitespace. It turns out that `./config.stats --config` is a thing though.
Reviewed By: mbouaziz
Differential Revision: D4642422
fbshipit-source-id: ae075ca
Summary:
Given two analysis results, it's now possible to compare them with the following command:
infer --diff --report-current reportA.json --report-previous reportB.json --file-renamings file_renamings.json
this command will then generate 3 files in `infer-out/differential/{introduced, fixed, preexisting}.json`, whose meaning is the following:
- `introduced.json` has all issues in `current` that are not in `previous`
- `fixed.json` has all issues in `previous` that are not in `current`
- `preexisting.json` has all issues that are in both `current` and `previous`
The json files generated can then be used to categorise results coming from incremental analyses of a codebase.
Reviewed By: jvillard
Differential Revision: D4482517
fbshipit-source-id: 1f7df3e
Summary: Not priting it results in staring terminal not priting anything for a long time. Just to realize `make` just started to build clang.
Reviewed By: martinoluca, jvillard
Differential Revision: D4642791
fbshipit-source-id: 177a228
Summary:
This is useful to make sure `./build-infer.sh clang` and `./build-infer.sh
java` work correctly.
I had to move one unit test inside a new unit/clang/ directory used only if clang is enabled, and create a stub for it in unit/clang_stubs/ for when clang is disabled.
Renamed `OCAML_SOURCES` to the more consistent and descriptive `OCAML_CONFIG_SOURCES`.
Reviewed By: jeremydubreil
Differential Revision: D4571997
fbshipit-source-id: 9502114
Summary:
It's annoying that changing the Makefile or running `./configure` with
different options does not always retrigger compilation of some targets, eg
infer.
Reviewed By: akotulski
Differential Revision: D4571988
fbshipit-source-id: dda080f
Summary:
Xcode's compilation databases follows a different convention than cmake's and
escape the `"file"` and `"dir"` fields of each unit to make them shell-ready.
We need to treat them differently when reading them.
This adds a new `--clang-compilation-db-files-escaped` option and makes the
code related to reading compilation databases deal correctly with both
conventions.
Reviewed By: akotulski
Differential Revision: D4559239
fbshipit-source-id: 51120ae
Summary: Some compilation databases give relatives paths for the `"file"` field. This is not ambiguous as there is also a `"dir"` field, so use that to make the path absolute when needed.
Reviewed By: dulmarod
Differential Revision: D4559145
fbshipit-source-id: be36a16
Summary: One step on the way to being able to test java/clang separately.
Reviewed By: akotulski
Differential Revision: D4558948
fbshipit-source-id: c0c7556
Summary:
This replaces the previous integration written in Python, which consisted in 1)
run the mvn command and parse its output to locate "directories containing
source files", 2) run on files named "*.java" in these directories. This meant
we had to run javac twice on each source file, and more importantly this
mechanism of finding source files was very fragile. In fact, I could not make
it work on several mvn projects I tried.
The new integration is based on parsing "pom.xml" to add an "infer-capture"
profile which instructs mvn to run `/path/to/infer` instead of `javac`. We also
add this profile to each maven submodule.
Users can specify an "infer-capture" profile themselves if the default one
doesn't work; in that case we don't inject our own "infer-capture" profile.
Reviewed By: jeremydubreil
Differential Revision: D4409613
fbshipit-source-id: d664274
Summary:
`make byte` will populate infer/bin/ with bytecode version of each executable,
plus infer/bin/infer.byte (used to remember which of the native or byte
executables have been built most recently). `make infer` now also creates
infer/bin/infer.native, so that we're sure to replace the executables with
native/byte versions as appropriate.
This is to make debugging a tad easier:
make byte
ledit ocamldebug $(which infer) <infer args>
Whereas previously one had to:
make -C infer/src byte
ledit ocamldebug infer/_build/infer/backend/infer.byte <infer args>
Reviewed By: jberdine
Differential Revision: D4409476
fbshipit-source-id: ab5f57d
Summary:
This diff allows to use the linters written in DSL to check for bugs.
Now new checkers can be written directly in the DSL.
The diff also remove some weirdness and simplify the CTL semantics.
For example no need to unwrap a node when evaluating the IN operator.
Also no need to distinguish anymore between stmt and decl in the
semantics of EX and EF.
Moreover, the diff de-couple hard-coded checkers (eg checks on component kit)
from those checkers parsed in the .al files.
Reviewed By: martinoluca
Differential Revision: D4375207
fbshipit-source-id: 9ac2d47
Summary:
Without this it's not always obvious which test fails. It also makes it easier
to mass-patch test failures from the CI jobs to replace expected outputs with
actual outputs (eg, when debugging osx frontend tests from linux).
Reviewed By: jberdine
Differential Revision: D4352205
fbshipit-source-id: 8887d7b
Summary:
Seems like we cannot run 2 instances of Buck in parallel even when one uses
buck-out/ and the other buck-out/foo/.
Reviewed By: sblackshear
Differential Revision: D4347090
fbshipit-source-id: 7e65d2f
Summary:
This will simplify the InferPrint logic of checking what should/should-not be reported.
I will remove the issue names in Localise in a next diff.
Reviewed By: ddino
Differential Revision: D4334327
fbshipit-source-id: ebcfd6c
Summary:
Most of the diff adds a way to run an existing test with different infer
options.
Also, do not run the Python script when capturing "analyze".
fixes https://github.com/facebook/infer/issues/518
Reviewed By: jberdine
Differential Revision: D4333762
fbshipit-source-id: 642acff
Jules Villard
Mehdi Bouaziz
Dino Distefano
Andrzej Kotulski
Martino Luca
Dulma Churchill
Kihong Heo
Josh Berdine