Summary:
Warning: This might be a bit brutal.
PerfStats and EventLogger are pretty much subsumed by `ScubaLogging`.
It seems no one has been looking at the data they generate recently.
Let's delete them! If we need to re-implement some parts later on, let's
do that using `ScubaLogging`, which is better (eg, still produces data
when infer crashes).
Things we lose:
- errors in the clang frontend due to missing decl translation, etc.
- errors in biabduction due to timeouts, functions not found, etc.
We could also re-implement these using BackendStats and ScubaLogging
instead of brutally deleting everything.
Reviewed By: ngorogiannis
Differential Revision: D20343087
fbshipit-source-id: 90a3121ca
Summary:
The goals are to have all the checker definitions and documentation in one
place (except how to actually run them, since that's not quite the same
concept; for example inferbo is one checker but several analyses depend on its
symbolic execution), and later on to be able to link issues reported by infer
back to the checker that generated them.
This makes apparent that the documentation of our checkers is lacking,
not touching that in this diff.
Not sure if "analysis" would be a better name than "checker" at this
point? For instance "Linters" is one of the checkers, which historically
at least we have not considered to be the case.
Reviewed By: mityal
Differential Revision: D20252386
fbshipit-source-id: fc611bfb7
Summary:
Problem: `infer report <specs file name>` is called manually sometimes to see analysis results in CLI. However, giving the specs file name is sometimes annoying, because the specs file name may be quite long and include special characters sometimes.
This diff introduces `--procedures-summary` to lookup the summaries interactively in `infer explore`.
example1: There are 8 procedures that include "max" in their names, then I selected one of them by entering a number.
```
$ infer explore --procedures --procedures-filter '.*max.*' --procedures-summary
0: minmax_div_const2_Bad_FN
1: minmax_div_const_Good
2: use_int64_max_Bad
3: use_uint64_max_Good
4: use_int64_max_Good
5: minmax_div_const_Bad
6: minmax_div_const2_Good
7: use_uint64_max_Bad
Select one number (type 'a' for selecting all, 'q' for quit): 2
void use_int64_max_Bad()
Analyzed
ERRORS: BUFFER_OVERRUN_L1
WARNINGS:
FAILURE:NONE SYMOPS:0
BufferOverrunAnalysis: StackLocs: { } MemPure: { } Alias: { ret= }
BufferOverrunChecker: Safety conditions:
{ }
```
example2: If there is only one specs file that satisfies the given filter, it reports the summary of that procedure without an interaction.
```
$ infer explore --procedures --procedures-filter '.*add_in_loop_ok.*' --procedures-summary
Selected proc name: void ArrayListTest.add_in_loop_ok()
void void ArrayListTest.add_in_loop_ok()(ArrayListTest* this)
Analyzed
ERRORS:
WARNINGS:
FAILURE:NONE SYMOPS:0
BufferOverrunAnalysis: StackLocs: { } MemPure: { } Alias:
{ i=size(__new-390022197-0-1.elements), ret= }
LatestPrune: latest { i -> (5, { }, { }) by ((5, { }, { }) >= (5, { }, { })),
__new-390022197-0-1.elements -> (⊥, { }, { __new-390022197-1-1 -> length : 5 }) by ((5, { }, { }) >= (5, { }, { })) }
BufferOverrunChecker: Safety conditions:
{ }
```
Reviewed By: jvillard
Differential Revision: D20284052
fbshipit-source-id: 2131339f1
Summary: Add the possibility of passing Scuba tagsets through the command line arguments.
Reviewed By: ngorogiannis
Differential Revision: D20262807
fbshipit-source-id: 9134cce8f
Summary:
It's a lot of code to maintain for something that no one ever uses
anymore.
Reviewed By: ngorogiannis
Differential Revision: D20282794
fbshipit-source-id: 28422c415
Summary:
These were not used (and were actually activated byt the same config
param). They both are in experimental stage that never reached maturity.
Since the team does not have immediate plans to work on ObjC nullability
checker; and since "eradicate" (now known as nullsafe) is the main
solution for Java, removing it is sensible.
Reviewed By: jvillard
Differential Revision: D20279866
fbshipit-source-id: 79e64992b
Summary:
This diff renames `ZERO_XXX` issues to more appropriately named and descriptive
`XXX_UNREACHABLE_AT_EXIT` and replaces bottom with
unreachable in cost kinds and issues.
Reviewed By: skcho
Differential Revision: D20140301
fbshipit-source-id: eb6076b30
Summary:
The `--continue-analysis` option enables continuing analysis after more targets are captured by
`--continue`. For example,
```
$ infer capture -- buck build tgt1
$ infer analyze --merge
$ infer capture --continue -- bucck build tgt2
$ infer analyze --merge --continue-analyze
```
In the last analysis, it reuses the analysis results of `tgt1` from the previous analysis. If
`tgt1` and `tgt2` have a same dependency to a library, the analysis results of the library is also
reused.
Reviewed By: dulmarod
Differential Revision: D19996598
fbshipit-source-id: bb6874a6f
Summary:
Add support for nullsafe mode with `trust=all` and `trust=none` a case
with a specific trust list is not supported yet and needs to be
implemented separately.
Tests introduce one unexpected
`ERADICATE_INCONSISTENT_SUBCLASS_PARAMETER_ANNOTATION` issue which
complains about `this` having incorrect nullability; it is a bug and
needs to be fixed separately.
Reviewed By: mityal
Differential Revision: D19662708
fbshipit-source-id: 3bc1e3952
Summary: We don't use allocation costs in prod at the moment. There is no plan to do so in the near future. Let's not report them anymore and also save some space in `costs-report.json`.
Reviewed By: skcho
Differential Revision: D19766828
fbshipit-source-id: 06dffa61d
Summary:
This diff introduces two issue types: `BUFFER_OVERRUN_T1` and `INFERBO_ALLOC_IS_TAINTED`, which
denotes tainted values are used in array accesses and memory allocations, respectively.
Note that the taint analysis is intra-procedural for now.
Reviewed By: ezgicicek
Differential Revision: D19410536
fbshipit-source-id: af85148ec
Summary:
This diff adds a taint domain in Inferbo. The taint value will be used to find vulnerable array
accesses in the following diffs.
Reviewed By: ezgicicek
Differential Revision: D19391028
fbshipit-source-id: 566b4c0fe
Summary: This adds a check for when developers use weakSelf (and maybe strongSelf) in a block, when there is no need for it, because it won't cause a retain cycle. In general there is an annotation in Objective-C for methods that take blocks, NS_NOESCAPE, that means that the passed block won't leave the scope, i.e. is "no escaping". So we report when weakSelf is used and the block has the annotation.
Reviewed By: ngorogiannis
Differential Revision: D19662468
fbshipit-source-id: f5ac695aa
Summary:
Adding a new check as part of the SelfInBlock checker, for cases when a strong pointer to self, that is not self, is captured in the block.
This will cover the following wrong scenarios:
1. strongSelf is a local variable in a block as it should be, and then it's used in a sub-block, in which case it's a captured variable.
2. weakSelf is defined without the weak attribute by mistake.
Reviewed By: ngorogiannis
Differential Revision: D19538036
fbshipit-source-id: 151871745
Summary:
Now we can either disable it, or enable it only.
For integrations that disable it, this will allow to enable it for
NullsafeStrict classes without enabled it fully
Reviewed By: artempyanykh
Differential Revision: D19409131
fbshipit-source-id: a2b1fe650
Summary:
That was used only by the now-defunct Java Buck integration without
genrules.
Reviewed By: ngorogiannis
Differential Revision: D19176545
fbshipit-source-id: 8253b614a
Summary:
You should use `--buck-java` instead, which uses the new "genrule
master" integration.
This diff makes it impossible to select the previous integration.
Upcoming diffs will clean up the resulting dead code.
This also make infer fail hard when no buck mode is specified in a buck
capture command, eg `infer -- buck build //foo:foo`. The reason is that
we need to choose between 3 incompatible integrations and making any of
them the default will confuse at least one person in the future.
Reviewed By: ngorogiannis
Differential Revision: D19176391
fbshipit-source-id: 707d18b50
Summary:
These changes introduce the RestartScheduler which for now is a copy of the FileScheduler:
- added it as a possible argument to the recently added `--scheduler` option.
- made the necessary changes in `InferAnalyze` to call it if it was chosen.
Reviewed By: ngorogiannis
Differential Revision: D19373505
fbshipit-source-id: 98f065057
Summary: Add command line option that directs racerd to treat all return values from unknown code (including abstract methods) as owned objects. This is essentially treating return values with full angelicism
Reviewed By: artempyanykh
Differential Revision: D19368375
fbshipit-source-id: 6a10153fa
Summary:
This changes how we select amongst our (currently) 4 Buck integrations
for Java and clang, as well as how the user's choice is reflected by the
Config module.
The old command line interface is still supported but is now deprecated.
The changes in how to select each integration are:
- clang via "flavors", activated with `--flavors`, now with `--buck-clang`
- clang via "compilation DB", activated with `--buck-compilation-database`, unchanged
- Java via "genrule", activated with `--genrule-master-mode`, now with `--buck-java`
- Java "without genrules", used to be activated by *not specifying any other Buck mode*, unchanged
Instead of various `Config` flags corresponding to the previous CLI that
are allowed in any combination of `flavors`,
`buck_compilation_database`, `genrule_master_mode`, `Config` now exposes
a single `buck_mode` datatype. This allows, eg, `flavors` to override
`buck_compilation_database` if needed. It will also make it easier to
get rid of the old "Java without genrules" integration in a later diff
(see inline comments).
Reviewed By: ngorogiannis
Differential Revision: D19175686
fbshipit-source-id: 29b3831be
Summary:
The re-execution phase uses only the preconditions found by the footprint phase. Thus, Infer should
not spend time optimizing POSTconditions. These are used only to find custom errors.
Reviewed By: jvillard
Differential Revision: D19035495
fbshipit-source-id: d52b82733
Summary:
Inferbo does not use the external relational domains, apron and elina. At some point, the parts of
inferbo using them were broken and they do not seem to be fixed easily in the near future. Let's
remove them and keep the code base cleaner.
Reviewed By: jvillard
Differential Revision: D19022905
fbshipit-source-id: e0eafe79f
Summary: The new domain is much better than the old one. Let's kill the old one (along with old litho tests) and simplify things.
Reviewed By: skcho
Differential Revision: D18959627
fbshipit-source-id: df77ae20e
Summary: It is not used anywhere and there are no plans to revive it. Kill it!
Reviewed By: skcho
Differential Revision: D18934719
fbshipit-source-id: b9b069b96
Summary: This diff checks litho condition on the new abstract value. This is triggered with `--new-litho-domain`, but it is intra-procedural as of now.
Reviewed By: ezgicicek
Differential Revision: D18783203
fbshipit-source-id: 98570104e
Summary: Raises an error when weakSelf is used multiple times in a block. The issue is that there could be unexpected behaviour. Even if `weakSelf` is not nil in the first use, it could be nil in the following uses since the object that `weakSelf` points to could be freed anytime.
Reviewed By: skcho
Differential Revision: D18765493
fbshipit-source-id: 37fc652e3
Summary:
We were wrongly not supressing third-party calls in
case third party repo is provided: there was a bug in the function is_modelled_externally.
because of this we accidentally stopped supressing third party and
started to advertise it in non-strict mode.
we do plan doing that, but little bit further ahead :)
So let's add a param guiding this.
Reviewed By: artempyanykh
Differential Revision: D18658271
fbshipit-source-id: 703f2675b
Summary:
Now we point to the root cause of the problem, and also provide
actionable way to solve the issue
Reviewed By: artempyanykh
Differential Revision: D18575650
fbshipit-source-id: ba4884fe1
Summary:
First step towards a global analysis. A new command line flag activates the step in `Driver`.
The whole-program analysis is a simple, quadratic (inefficient-as-yet), iteration over all domain elements. However, it is restricted to those elements that are explicitly scheduled to run.
Reviewed By: skcho
Differential Revision: D17787441
fbshipit-source-id: 9fecd766c
Summary:
Note: Disabled by default.
Having some support for values, we can report when a null or constant
value is being dereferenced. The particularity here is that we don't
report when 0 is a possible value for the address, or even if we know
that the value of the address can only be 0 in that branch! Instead, we
allow ourselves to report only when we the address has been *set* to
NULL (or any constant).
This is in line with how pulse deals with other issues: only report when
1. we see an address become invalid, and
2. we see the same address be used later on
Reviewed By: skcho
Differential Revision: D17665468
fbshipit-source-id: f1ccf94cf
Summary:
The variable strongSelf, because it is equal to a weak captured pointer, needs to be checked for null before being used, otherwise it could be null by the time the block is executed.
Added this check to the SelfInBlock checker, and removed it from biabduction.
We want to migrate all the objc checks from biabduction, so it will be easier to change and faster and more reliable. Moreover, this check is more general, it will flag any use of unchecked strongSelf, not just a dereference.
Reviewed By: skcho
Differential Revision: D18403849
fbshipit-source-id: a9cf5d80b
Summary:
Let's introduce a set of new cost analysis issue types that are raised when the function is statically determined to run on the UI thread. For this, we rely on the existing `runs_on_ui_thread` check that is developed for RacerD. We also update the cost summary and `jsonbug.cost_item` to include whether a method is on the ui thread so that we don't repeatedly compute this at diff time for complexity increase issues.
Note that `*_UI_THREAD` cost issues are assumed to be more strict than `*_COLD_START` reports at the moment. Next, we can also consider adding a new issue type that combines both such as `*_UI_THREAD_AND_COLD_START` (i.e. for methods that are both on cold start and run on ui thread).
Reviewed By: ngorogiannis
Differential Revision: D18428408
fbshipit-source-id: f18805716
Summary:
Ability to accept relative path is convenient for testing and local
debugging.
Ability to accept absolute paths is needed for buck integration - buck
knows absolute path (to properly invalidate cache when the content of
the folder is changed) and passes it to infer.
Reviewed By: artempyanykh
Differential Revision: D18370407
fbshipit-source-id: be7f12ae1
Summary:
In this diff, we just load the info from the storage. Next diff will be
actually using this information to infer nullability.
`ThirdPartyAnnotationGlobalRepo.get_repo` will be used in the next diff,
hence #skipdeadcode
Reviewed By: artempyanykh
Differential Revision: D18347647
fbshipit-source-id: 82a9223c6
Summary: We only care about expensive invariant calls. Let's disable the usual one since it is not used and there is no point filling up our dbs.
Reviewed By: dulmarod
Differential Revision: D18298530
fbshipit-source-id: 7a933c8da
Summary:
Describe what the --report-*-* options actually do instead of their
outdated documentation from the time where this was
`--checkers-blacklist-regex`, `--infer-blacklist-regex` and the like.
Reviewed By: dulmarod, mityal
Differential Revision: D17906015
fbshipit-source-id: 204349e9e
Summary: Not used feature and with no obvious roadmap anymore.
Reviewed By: jberdine, jvillard
Differential Revision: D17855860
fbshipit-source-id: fd75b9d62
Summary: `litho` checker contained two checkers: required-props and graphQL field accesses. Although they use the same domain, their reporting conditions and analysis details are different. However, they were bundled into the same analysis by adding disjunctions to `exec_instr` to handle both cases. Let's separate them into two different checkers, keeping a modular transfer function and analyzer that is reused by these two checkers.
Reviewed By: skcho
Differential Revision: D17788834
fbshipit-source-id: 47d77063b
Summary:
The documentation and uses of filtering disagree. One typical usage is deduplication.
Split that where obvious, add comments where not obvious, and leave alone when obviously unrelated to deduplication.
Reviewed By: mityal
Differential Revision: D17715329
fbshipit-source-id: ec757927b
Summary:
Introduce a new experimental checker (`--impurity`) that detects
impurity information, tracking which parameters and global variables
of a function are modified. The checker relies on Pulse to detect how
the state changes: it traverses the pre and post pairs starting from
the parameter/global variable and finds where the pre and post heaps
diverge. At diversion points, we expect to see WrittenTo/Invalid attributes
containing a trace of how the address was modified. We use these to
construct the trace of impurity.
This checker is a complement to the purity checker that exists mainly
for Java (and used for cost and loop-hoisting analyses). The aim of
this new experimental checker is to rely on Pulse's precise
memory treatment and come up with a more precise im(purity)
analysis. To distinguish the two checkers, we introduce a new issue
type `IMPURE_FUNCTION` that reports when a function is impure, rather
than when it is pure (as in the purity checker).
TODO:
- improve the analysis to rely on impurity information of external
library calls. Currently, all library calls are assumed to be nops,
hence pure.
- de-entangle Pulse reporting from analysis.
Reviewed By: skcho
Differential Revision: D17051567
fbshipit-source-id: 5e10afb4f
Jules Villard
Sungkeun Cho
Fernando Gasperi Jabalera
Mitya Lyubarskiy
Ezgi Çiçek
Artem Pianykh
Nikos Gorogiannis
Dulma Churchill
Radu Grigore
Martin Trojer