Summary: Under the buck/java integration, the classpath is propagated to all infer command lines. Logging that leads to huge waste and full disks. Make the logging conditional to debug mode.
Reviewed By: skcho
Differential Revision: D18934088
fbshipit-source-id: 7e2f410f5
Summary:
This diff enables parsing and auto-formatting documentation
comments (aka docstrings).
I have looked at this entire diff and manually made some changes to
improve the formatting. In some cases it looked like it would take too
much time, or benefit from someone more familiar with the code doing
it, and I instead disabled auto-formatting docstrings in those files.
Also, there are some source files where the docstrings are invalid,
and some where the structure detected by the parser appears not to
match what was intended. Auto-formatting has been disabled for these
files.
Reviewed By: ezgicicek
Differential Revision: D18755888
fbshipit-source-id: 68d72465d
Summary:
One standard way to schedule work is by starting a thread. We treat this by
- Treating invocations of `start` on a receiver with the `Runnable _` attribute as scheduling that runnable for parallel execution in the background (as opposed to on the UI thread).
- If `start` is used on an object of a subclass of `Thread` everything already works thanks to the `get_exp_attributes` function which will implicitly ascribe to an expression the attribute `Runnable _` if the expression points to an object with a known `run` method. This will even take care of some degree of dynamic dispatch, yay!
- If `start` is used on a `Thread` object which has been created with a constructor call provided with a `Runnable` argument, we have to appropriately model that constructor call, which is what is done in `do_call`.
Reviewed By: jvillard
Differential Revision: D18726676
fbshipit-source-id: 0bd83c28e
Summary:
The introduction of inferbo intervals as pulse attributes creates the
first relational attributes. To make sense of inferbo intervals
appearing in summaries when in a caller context, we need to substitute
the abstract values they contain in the callee with the abstract values
they correspond to in the caller.
This has a significant consequence: we have to delay the check that
arithmetic constraints in the callee are satisfiable at the call-site
until *after* we have discovered all the relationships between callee
values and caller values from the heap. To solve this, we now run an
arithmetic constraints check *after* having materialised all the
addresses.
We also need to translate the abstract values in the attributes in the
post before recording them in the caller, for the same reasons.
Quite some code in this diff is concerned with substituting pulse values
inside inferbo intervals. There is a complication there too: even after
having discovered relationships between caller and callee abstract
values induced by the heap shapes, there could be abstract values in the
callee's attributes that we haven't seen yet. We need to make up new
values for these in the caller, so this substitution has to return a
potentially extended substitution.
Reviewed By: skcho
Differential Revision: D18745695
fbshipit-source-id: 077ae7670
Summary:
It extracts RHS of alias from `AliasTarget.t`, so it changes the `AliasMap` domain:
```
before : KeyLhs.t -> AliasTarget.t // AliasTarget.t includes KeyRhs.t
after : KeyLhs.t -> KeyRhs.t * AliasTarget.t
```
Reviewed By: ezgicicek
Differential Revision: D18299537
fbshipit-source-id: 1446580a8
Summary:
Now that we have two similar functions, it becomes confusing, because `Pp.to_string` and `Pp.string_of_pp` can seem to do the same stuff, while in reality they do the opposite.
Well, it is still bit confusing, because the proper names would be
`Pp.pp_of_to_string` and `Pp.to_string_of_pp`, but I think this high
level order names are not necessary given that in most cases they will
be used as concrete functions.
I think `Pp.of_string` captures such usages better than `to_string` used to do: you need to pp stuff,
but you have a string (or, technically, a function that returns a string), so you pretty print OF that string, aren't you?
Reviewed By: jvillard
Differential Revision: D18245876
fbshipit-source-id: fd4b6ab68
Summary:
This is a helper module for reading info from a 3rd party nullability repository.
Next diffs are going to use it for reading nullability repository from
disk.
Reviewed By: artempyanykh
Differential Revision: D18225473
fbshipit-source-id: 06a2dc97e
Summary:
It's annoying to see `sexp_list` everywhere instead of `list`, eg in
merlin.
See also D17907938.
Reviewed By: ngorogiannis
Differential Revision: D17927994
fbshipit-source-id: 84599e8bc
Summary:
Previously we would incorrectly report the time for the whole process
and this could include capture time too.
Reviewed By: mityal
Differential Revision: D17423977
fbshipit-source-id: b3ed754b3
Summary: Numeric attribute ranks are getting confused with addresses. Add an option (false by default) to MakePPUniqRankSet which prevents printing of the ranks.
Reviewed By: jvillard
Differential Revision: D17094269
fbshipit-source-id: 353c52fca
Summary:
It prunes the size of collections when the size function is called in the condition expression. The diff extended the alias domain to understand temporary variables of SIL from Java.
Depends on D16761461
Reviewed By: ezgicicek
Differential Revision: D16761611
fbshipit-source-id: 849c5c71c
Summary:
newer is better, right?
All the code changes in infer are because of core being bumped to v0.12.
Reviewed By: jberdine
Differential Revision: D16223183
fbshipit-source-id: f3c339966
Summary: Could be made better for cycles but not used and not unit tested, let's remove it.
Reviewed By: ngorogiannis
Differential Revision: D16017744
fbshipit-source-id: 6f7ae95c1
Summary: Do not fail on cycles, normalize values issuing from cycles, but do not try to recognize equal cycles like `let rec x = 1 :: x` and `let rec y = 1 :: 1 :: y`. This is unlikely to happen in our code.
Reviewed By: ngorogiannis
Differential Revision: D16017365
fbshipit-source-id: 691bb756c
Summary:
The previous version had a potentially exponential behavior on values with already lots of sharing.
This is fixed here at the price of a multiplicative constant factor (cost of `Hashtbl.hash`).
It also prepares for the handling of cycles.
Reviewed By: ngorogiannis
Differential Revision: D16016906
fbshipit-source-id: 611287917
Summary:
Reduces the size of the `tenv` by sharing values as most as possible, in an untyped - but supposedly safe - way, by using black magic on objects.
Can be reused for other things later.
Reviewed By: ngorogiannis
Differential Revision: D15855870
fbshipit-source-id: 169a4b86b
Summary:
Instrument SIL according to TOPL properties. Roughly, the
instrumentation is a set of calls into procedures that simulate a
nondeterministic automaton. For now, those procedures are NOP dummies.
Reviewed By: jvillard
Differential Revision: D15063942
fbshipit-source-id: d22c2f6fa
Summary:
Improve the error messages, change is more or less documented in the
code.
Reviewed By: mbouaziz
Differential Revision: D15374334
fbshipit-source-id: f1dd54180
Summary:
TOPL properties are essentially automata, which will be modeled as a set
of procedures. The code-to-analyze makes calls into these procedures,
thereby driving the automaton. In this commit, these calls do not do
anything. The point is to prepare the hook-up mechanism.
Reviewed By: jvillard
Differential Revision: D14819650
fbshipit-source-id: d95ecdb3d
Summary:
This ensures that each attribute type can only be present once per
address. Makes ~80x time improvement on pathological cases such as
Duff's device.
This introduces a new kind of Set in `PrettyPrintable`.
Reviewed By: mbouaziz
Differential Revision: D14645091
fbshipit-source-id: c7f9b760c
Summary: Spent some time staring at empty HTML output instead of seeing `<Some ...>` because I'm dumb. Now it's dumb proof.
Reviewed By: mbouaziz
Differential Revision: D14258492
fbshipit-source-id: d1368d212
Summary:
The `oenv` is an option.
This diff ensures that it is `Some` during the analysis and `None` when it is stored in a summary.
It could have been resolved with another type, e.g. `unit`, but an option was needed to avoid duplicating code that is generic up to some point.
The price to pay is a parametric type.
Reviewed By: skcho
Differential Revision: D13825418
fbshipit-source-id: 71824609d
Summary:
Record per-location traces. Actually, that doesn't quite make sense as a
location can be accessed in many ways, so associate a trace to each
*edge* in the memory graph. For instance, when doing `x->f = *y`, we
want to take the history of the `<val of y> --*--> ..` edge, add "assigned
at location blah" to it and store this extended history to the edge
`<val of x> --f--> ..`.
Use this machinery to print nicer traces in `infer explore` and better
error messages too (include the last assignment, like biabduction
messages).
Reviewed By: da319
Differential Revision: D13518668
fbshipit-source-id: 0a62fb55f
Summary:
When assign to the special `return` variable, check that the result is
not the address of a local variable, otherwise report.
Reviewed By: ngorogiannis
Differential Revision: D13466896
fbshipit-source-id: 465da7f13
Summary:
When a lambda gets created, record the abstract addresses it captures, then
complain if we see some of them be invalidated before it is called.
Add a notion of "allocator" for reporting better messages. The messages are
still a bit sucky, will need to improve them more generally at some point.
```
jul lambda ~ infer 1 infer -g --pulse-only -- clang -std=c++11 -c infer/tests/codetoanalyze/cpp/pulse/closures.cpp
Logs in /home/jul/infer.fb/infer-out/logs
Capturing in make/cc mode...
Found 1 source file to analyze in /home/jul/infer.fb/infer-out
Found 2 issues
infer/tests/codetoanalyze/cpp/pulse/closures.cpp:21: error: USE_AFTER_DESTRUCTOR
`&(f)` accesses address `s` captured by `&(f)` as `s` invalidated by destructor call `S_~S(s)` at line 20, column 3 past its lifetime (debug: 5).
19. f = [&s] { return s.f; };
20. } // destructor for s called here
21. > return f(); // s used here
22. }
23.
infer/tests/codetoanalyze/cpp/pulse/closures.cpp:30: error: USE_AFTER_DESTRUCTOR
`&(f)` accesses address `s` captured by `&(f)` as `s` invalidated by destructor call `S_~S(s)` at line 29, column 3 past its lifetime (debug: 8).
28. f = [&] { return s.f; };
29. }
30. > return f();
31. }
32.
Summary of the reports
USE_AFTER_DESTRUCTOR: 2
```
Reviewed By: da319
Differential Revision: D13400074
fbshipit-source-id: 3c68ff4ea
Summary:
Sometimes in debug mode, the condition set is too big to print in the
log file. This diff limits the maximum number of conditions to print
as 30.
Reviewed By: mbouaziz
Differential Revision: D12836661
fbshipit-source-id: 8ddfe64a7
Nikos Gorogiannis
Jules Villard
Josh Berdine
Sungkeun Cho
Mitya Lyubarskiy
Ezgi Çiçek
Artem Pianykh
Mehdi Bouaziz
Radu Grigore
Jeremy Dubreil
Daniel Mercier
Nikos Gorogiannis