Summary:
I found it very confusing that running infer with --debug makes the
report to be different.
Intuitively, I expect (and I think majority of users would expect) that
`--debug` makes things more verbose (and potentially more slow / consuming
more memory and disk space), but does not change anything apart from it.
One pro of preserving existing behavior, pointed by jvillard:
- Suppose some check is experimental or disabled in the config. The
users expect the issue to be found, but it does not show up. They run
`infer --debug` to understand the behavior, and suddenly the issue shows
up.
I, hovewer, find this pro not important enough and potentially confusing
the users even more.
(If they want to investigate seriously, they can always use
--no-filtering, and there are a lot of cases when the issue does not
show up for others, much hard to undertand reasons, than the fact that
it is disabled).
Reviewed By: jvillard
Differential Revision: D17113750
fbshipit-source-id: 46cc93503
Summary:
This is more powerful than `"symbols"` for more advanced use-cases. Keep
`"symbols"` unchanged to make migrating easier.
Differential Revision: D16985756
fbshipit-source-id: dfbb09393
Summary:
The models are only for biabduction so try to make that clearer in the
code and documentation.
Reviewed By: skcho
Differential Revision: D16603147
fbshipit-source-id: 4a2be53de
Summary:
It's not being worked on and is not in a state where it works.
It would probably better to write this as a script of some kind or else
resurrect this subcommand in a form where it behaves more like a script,
ie fork/execs infer analyses instead of having them be function calls
(but then it might as well *be* a script as it would likely be more
flexible).
In any case...
youarealreadydead
Reviewed By: ezgicicek
Differential Revision: D16602417
fbshipit-source-id: d0d129539
Summary:
These have proved to be too fragile to maintain as they would often break
compilation of user code. They have been off by default for more than a year
now (D7350715).
Removing the include models shows a more accurate picture of what infer results
look like in production. As such, lots of tests have changed, mostly
biabduction but also in inferbo. SIOF was using include-based models too but
now libc++ is better and iostreams are implemented in a way that SIOF
understands (instead of being magical creatures) so nothing changed there.
Reviewed By: skcho
Differential Revision: D16602171
fbshipit-source-id: ce38f045b
Summary:
- make most behaviours independent of the java version so that either works fine without user intervention
- modify regexp used to parse `javac` output to work for all versions
- no need to be sure we are in Java 11 to match java 11-only method name in quandary
- for the rest, provide a command-line flag to specify the java version manually in case it differs from the version that infer was built against
- this only affects the Maven integration for now
To do all that, also change the configure script to record the version of java instead of just a boolean for whether it's >= 10.
Reviewed By: ezgicicek
Differential Revision: D16493988
fbshipit-source-id: 622e91b25
Summary:
The default values of config options can sometimes depend on build-time
configuration values. This makes checking that the manuals "remain the same"
trickier as the manuals can be different depending on the platform. This
removes *all* default values from the checked-in manuals. We could be more
fine-grained and scrub only the values that are susceptible to change but for
now this is probably good enough.
This is done by implementing new options `--help-scrubbed` and
`--help-scrubbed-full` and using these in our tests instead of `--help` and
`--help-full` (which remain unaffected).
Also don't wrap the default values in `$(i,...)` anymore because the defaults
can trigger line breaks and then the man page is ill-formatted because that
format is stupid.
Reviewed By: mityal
Differential Revision: D16543779
fbshipit-source-id: bc929ff8c
Summary:
As discussed in D16358474, the options `--reanalyze` and `--incremental-analysis` are not compatible
This diff warns about the compatibility problem in the documentation
Reviewed By: jvillard
Differential Revision: D16440482
fbshipit-source-id: ab841ace6
Summary:
Add a flag to enable incremental diff analysis, where old summaries are not recomputed unless necessary
The implementation for this flag will follow
Reviewed By: ngorogiannis
Differential Revision: D16222865
fbshipit-source-id: e7e225a87
Summary:
Replaced by pulse. `--ownership` is now a deprecated form of `--pulse`.
The ownership checker is starting to give wrong answers due to changes in the
clang frontend, so it's better to remove it in favour of pulse.
there_goes_my_hero
Reviewed By: ngorogiannis
Differential Revision: D16107650
fbshipit-source-id: bb2446a19
Summary:
- Add allocation costs to `costs-report.json` and enable diffing over allocation costs.
- Also, let's be more consistent and modular in naming our cost issues.
- introduce a generic issue type `X_TIME_COMPLEXITY_INCREASE` where `X` can be one of the cost kinds. If the function is on the cold start, issue can have the `COLD_START` suffix. Similarly for infinite/zero/expensive calls.
- Change `PERFORMANCE_VARIATION` -> `EXECUTION_TIME_COMPLEXITY_INCREASE`
- Add new issue type for `ALLOCATION_COMPLEXITY_INCREASE_COLD_START` which will be enabled by default
- Refactor cost issues to be more modular and succinct. This also makes addition of a new cost kind very easy by adding the kind into the `enabled_cost_kinds` list in `CostKind.ml`
Reviewed By: mbouaziz
Differential Revision: D15822681
fbshipit-source-id: cf89ece59
Summary:
This is a simple checker that identifies inefficient uses of `keySet` iterator where (not only the key but also) the value is accessed via `get(key)`. It is more efficient to use `entrySet` iterator which already returns both key-value pairs. This optimization would get rid of many extra lookups which can be expensive.
We simply traverse the CFG starting from the loop head upwards and pick up the map that is iterated over. Then, we check in the loop nodes if there is a call to `get(...)` over this map. If, so we report.
Reviewed By: ngorogiannis
Differential Revision: D15737779
fbshipit-source-id: 702465b4e
Summary:
Instrument SIL according to TOPL properties. Roughly, the
instrumentation is a set of calls into procedures that simulate a
nondeterministic automaton. For now, those procedures are NOP dummies.
Reviewed By: jvillard
Differential Revision: D15063942
fbshipit-source-id: d22c2f6fa
Summary:
`infer_events` table is a key-value storage that also have list of fields common for entire infer run.
Infer should be agnostic of many of such fields (e.g. diff number).
Hence we will pass such extra fields through CI.
Note that only "normals" (strings in scuba terminology) are currently supported.
Reason being: most of things that are technically ints (like IDs) should actually be normals (because average etc does not make sense for them; and group by, in contrast, does).
Reviewed By: jvillard
Differential Revision: D15376636
fbshipit-source-id: 729eaabfc
Summary:
API and stub implementation for real-time logging capabilities.
Low-level implementation requires interaction with FB-specific deployment of Scribe, hence it is stubbed out.
Reviewed By: jberdine
Differential Revision: D15259559
fbshipit-source-id: 712cb99e1
Summary: Previously there was no way of getting that list from the manual.
Reviewed By: jeremydubreil
Differential Revision: D15158598
fbshipit-source-id: 1705ed59d
Summary:
Adds option `--summary-stats` to `infer report`.
The formatting is not perfect yet but it gives what I want.
Reviewed By: ngorogiannis
Differential Revision: D15064162
fbshipit-source-id: 56c4b4929
Summary:
Replace `$(u,...)` with `$(i,...)` since `$(u,...)` doesn't exist.
Cmdliner was emitting a warning at runtime:
cmdliner error: Unknown cmdliner markup $(u,...) in "Specify classes where the destructor should be ignored when computing liveness. In other words, assignement to variables of these types (or common wrappers around these types such as $(u,unique_ptr<type>)) will count as dead stores when the variables are not read explicitly by the program. (default: $(i,[]))"
Reviewed By: mbouaziz
Differential Revision: D15045004
fbshipit-source-id: e03ece4f7
Summary:
This is ~2.5x wall clock faster, ~5x user time faster, and finds 98% of
the bugs. Not very scientific yet but seems better than the previous
non-scientific arbitrary default.
Reviewed By: ngorogiannis
Differential Revision: D14753494
fbshipit-source-id: b72cdd613
Summary:
TOPL properties are essentially automata, which specify a bad pattern.
This commit is just a parser for them.
Reviewed By: jvillard
Differential Revision: D14477671
fbshipit-source-id: c38a8ef37
Summary:
Add an option to specify some classes that we really want to warn about
with the liveness checker, even when they appear used because of the
implicit destructor call inserted by the compiler.
Reviewed By: mbouaziz
Differential Revision: D13991129
fbshipit-source-id: 7fafdba84
Summary:
Add the `--source-files-cfg` option to emit CFGs as .dot files just as if one
had run with `--debug` to begin with. The usual `--source-files-filter`
applies. For example:
```
$ cd examples
$ infer -- clang -c hello.c
$ infer --continue -- javac Hello.java
$ infer --continue -- make -C c_hello
$ infer explore --source-files --source-files-cfg --source-files-filter ".*\.c$"
hello.c
c_hello/example.c
CFGs written in /home/jul/infer.fb/examples/infer-out/captured/*/icfg.dot
```
Reviewed By: ezgicicek, mbouaziz
Differential Revision: D13973062
fbshipit-source-id: 3077e8b91