Summary: Because making a diff which breaks the tests because it silently fails to create the right posts for the models is notoriously hard to debug
Reviewed By: sblackshear
Differential Revision: D5471611
fbshipit-source-id: ef04539
Summary:
Add support for Makefiles to the copyright linter. Makefiles are a bit
different than shell because they should start with the copyright notice
straight away (whereas shell starts with the #! stuff).
Reviewed By: mbouaziz
Differential Revision: D4786620
fbshipit-source-id: 504dc23
Summary:
It can be useful when debugging infer or the Makefiles themselves to see what
`make` is doing. Instead of editing Makefiles to remove `@` now you can `make
VERBOSE=1`.
This is just `git ls-files | grep -e Makefile -e '.*\.make' | xargs sed -e 's/^\t@/\t$(QUIET)/' -i`, and adding the definition of `QUIET` to Makefile.config.
Reviewed By: jeremydubreil
Differential Revision: D4779115
fbshipit-source-id: e6e4642
Summary:
This is helpful to make sure tests are up to date wrt the models.
Also made the Java deps depend on the models.jar instead of the model sources
as that's what the tests will be using. In particular, updating the sources of
the models will not update the results of a test unless someone rebuilds
models.jar, so rerunning the tests when the models haven't been rebuilt is
useless.
Reviewed By: akotulski
Differential Revision: D4635129
fbshipit-source-id: 75b4ab6
Summary:
Before: `make clean` followed by running `infer -- make`. If infer fails, it is
rerun automatically (by the `silent_on_success` Makefile function) to show the
output to the user, but by then there is nothing to build and `make` does
nothing.
Now: run directly `infer -- make clean all`. If infer fails, the command is
rerun and rebuilds all the source files, so there is a higher chance that the
same error will be displayed to the user than the one that originally caused
the command to fail.
Reviewed By: dulmarod
Differential Revision: D4578477
fbshipit-source-id: 774f45c
Summary:
Turns out that swapping stdout and stderr using a temporary fd 3 was screwing
up with make's jobserver, who also uses fd 3!
Also, infer is partly to blame as it also calls `make`. Unsetting `MAKEFLAGS`
in infer tells `make` that the way infer calls `make` is independent from
parent `make` invocations.
Also, simplify the rules for direct tests and build system tests.
Reviewed By: jberdine
Differential Revision: D4328979
fbshipit-source-id: 96818e8
Summary:
`install` will not do anything if the file didn't change, which should give
`make` more opportunities to not do work.
Reviewed By: jeremydubreil
Differential Revision: D4161918
fbshipit-source-id: 9b9061a
Summary:
Config.analyze_models, set by the INFER_ANALYZE_MODELS environment
variable, is redundant with Config.models_mode.
Reviewed By: jvillard
Differential Revision: D4047338
fbshipit-source-id: 4522d65
Summary:
Given that mangling now respects `extern "C" {}` declarations, pnames of C function will have no mangling and we don't need to discard mangled part from procname.
Move `malloc` detection to `get_builtin_pname_opt` function (together with all others)
Reviewed By: dulmarod
Differential Revision: D3804402
fbshipit-source-id: 9ae9991
Summary:
a) An update to build-infer.sh to avoid downloading/building 4.02.3
ocaml compiler when it is already present.
b) Add the ifdef to avoid this error on glibc systems:
clang -c -w libc_basic.c -o libc_basic.o
libc_basic.c:692:12: error: unknown type name '__WAIT_STATUS'
pid_t wait(__WAIT_STATUS stat_loc) {
^
Closes https://github.com/facebook/infer/pull/429
Reviewed By: akotulski
Differential Revision: D3704604
Pulled By: jvillard
fbshipit-source-id: d557f1b
Summary:
Use Itanium mangling for C++ functions/methods instead of raw type name. This is a step towards removing expensive `ti_raw` field from `type_info`.
For virtual methods, use mangled name of the method from base class in order for dynamic dispatch to work.
Reviewed By: dulmarod
Differential Revision: D3556118
fbshipit-source-id: e45edb5
Summary:
When analyzing C model in C++, we were seeing some SKIP function triggered by generated constructors/operators= for C structs.
In C they weren't present, but in C++ compiler generates them for us. To avoid this (and future) problems
with models, translate all functions that are needed when computing the model
Reviewed By: dulmarod
Differential Revision: D3561873
fbshipit-source-id: f8ad2a0
Summary:
Array types where the length is not statically known were represented
using fresh variables. This diff:
- Makes array type length optional, reducing the amount of work needed
for renaming, substitution, and normalization.
- Revises uses of array length so that the length component of a
Tarray type represents only the statically determined constant
length of an array type, and the length component of a Sizeof
expression represents the dynamically determined length of an array
value.
- Restricts the type of static lengths from a general expression
(Sil.exp) to an integer (Sil.Int.t), enforcing that static types are
constant. This in particular ensures that types contain no
variables, and so are invariant under operations such as renaming
and substitution.
- Removes the type substitution and renaming functions typ_sub,
typ_normalize, and typ_captured_ren. Now that array type lengths
are constant integers, all of these functions are the identity.
Reviewed By: cristianoc
Differential Revision: D3387343
fbshipit-source-id: b5db768
Summary:
Hardcoding `variable@` in Makefiles is Bad™ because it prevents the users from
overwriting them easily with `make variable="my custom value"`. The right way
to do it is thus:
```
variable = variable@
# then use $(variable) everywhere
```
This diff puts all the `variable = variable@` lines in Makefile.config.in, and
changes every occurrence of a `variable@` to `$(variable)` everywhere else.
I mostly automated generating this diff. Here are the steps I did:
- find out which `variable@`s we use:
find . -name 'Makefile*' -exec grep -e '@[^@ []\+@' -o -h \{\} \+ | sort | uniq > config_variables
- write this `replace.sh` script to replace every `variable@` with `$(variable)`:
```
#!/bin/sh
config_vars_file=$1
shift
for line in $(cat $config_vars_file); do
var=$(echo $line | tr -d @)
sed -i -e "s/$line/\$($var)/g" $@ > /dev/null
done
```
- run the script as such:
find . -name 'Makefile.*in' \( -not -wholename './Makefile.config.in' \) -exec ./replace.sh config_variables \{\} \+
- put all the `VARIABLE = VARIABLE@` lines in Makefile.config.in
- move all `Makefile.in` to `Makefile`, since they don't need to be generated by `./configure` anymore:
```
for i in $(find . -name 'Makefile.*in' \( -not -wholename './Makefile.config.in' \)); do \
rm $(dirname $i)/$(basename $i .in) && git mv $i $(dirname $i)/$(basename $i .in) ; \
done
```
- delete all Makefile except Makefile.config from configure.ac
- manually inspect and remove remaining instances of `VAR = $(VAR)` in makefiles, looking at the output of `git grep '^\(\w\+\) = $(\1)'`
Reviewed By: jberdine
Differential Revision: D3358379
fbshipit-source-id: 5d37f02
Summary:public
Create separate specs for C models compiled in C++. It will allow us to tweak behavior/names of certain
functions based on the compilation language (such as adding `std::` namespace in C++).
Reviewed By: jvillard
Differential Revision: D2938992
fb-gh-sync-id: 73902f8
shipit-source-id: 73902f8
Summary:
public
When building models, make was invoked explicitly with `make -j` rather
than with `$(MAKE)`. This prevented controlling parallelism from the
top-level make invocation.
Reviewed By: akotulski
Differential Revision: D2786812
fb-gh-sync-id: 7f6d58c
Summary:
public
Lines other than the first of multi-line comments in non-ocaml files
were flush right instead of aligned.
Reviewed By: jvillard
Differential Revision: D2739752
fb-gh-sync-id: c85f56e
Summary:
public
Use autoconf's detection of xcode-select to decide whether to build the ObjC
models or not.
Reviewed By: jeremydubreil
Differential Revision: D2703864
fb-gh-sync-id: e6dadca
Summary: @publicThe first argument of builtin calls in C gets translated twice, which is bad if the argument is a side-effecting expression like a function call.
Test Plan: Attached test previously reported a memory leak because the translation introduces an extra call to malloc(), now reports nothing.
Summary:
@public
Remove setjmp that is causing problems in the models in linux.
Will investigate and add it again later.
Test Plan: All the models are now created. In particular strcpy, strdup and a few others in the beginning of the file.
Jeremy Dubreil
Mehdi Bouaziz
Jules Villard
Josh Berdine
Andrzej Kotulski
Martino Luca
Raghavendra Prabhu
Dulma Churchill
Dino Distefano
Cristiano Calcagno
Sam Blackshear
Open Source Synchronization