Summary:
This diff lifts the `PulseAbductiveDomain.t` in `PulseExecutionState` by tracking whether the program continues the analysis normally or exits unusually (e.g. by calling `exit` or `throw`):
```
type exec_state =
| ContinueProgram of PulseAbductiveDomain.t (** represents the state at the program point *)
| ExitProgram of PulseAbductiveDomain.t
(** represents the state originating at exit/divergence. *)
```
Now, Pulse's actual domain is tracked by `PulseExecutionState` and as soon as we try to analyze an instruction at `ExitProgram`, we simply return its state.
The aim is to recover the state at the time of the exit, rather than simply ignoring them (i.e. returning empty disjuncts). This allows us to get rid of some FNs that we were not able to detect before. Moreover, it also allows the impurity analysis to be more precise since we will know how the state changed up to exit.
TODO:
- Impurity analysis needs to be improved to consider functions that simply exit as impure.
- The next goal is to handle error state similarly so that when pulse finds an error, we recover the state at the error location (and potentially continue to analyze?).
Disclaimer: currently, we handle throw statements like exit (as was the case before). However, this is not correct. Ideally, control flow from throw nodes follows catch nodes rather than exiting the program entirely.
Reviewed By: jvillard
Differential Revision: D20791747
fbshipit-source-id: df9e5445a
Summary:
A plus is a plus, no need to give up when +/- is about pointers. This
gets rid of some false positives involving pointer arithmetic.
However, the problem remains if we make things a bit more
inter-procedural. This is documented in an added test.
Reviewed By: ezgicicek
Differential Revision: D18932877
fbshipit-source-id: 4ad1cfe72
Summary:
- Do most of the work of `solve_arithmetic_constraints` inside `subst_attribute` instead, since we need to re-use the latter function for post-conditions where the first function is not appropriate.
- When substituting arithmetic constraints, we refine arithmetic information (both concrete intervals and inferbo), which can lead to inconsistent states. Instead of recording the new arithmetic facts by returning a new current state, just act as a map on attributes. This is to enable doing the point above.
- All this lead to a somewhat messy refactoring...
- Rename `CannotApplyPre` to `Contradiction` since it's used for post-conditions as well now
Reviewed By: skcho
Differential Revision: D18889120
fbshipit-source-id: d81647143
Summary:
Finally use information from the inferbo intervals in pulse's domain to
make decisions about whether conditionals are feasible or not.
Reviewed By: skcho
Differential Revision: D18811193
fbshipit-source-id: d80a28657
Summary:
This gets rid of false positives when something invalid (eg null) is
passed by reference to an initialisation function. Havoc'ing what the
contents of the pointer to results in being optimistic about said
contents in the future.
Also surprisingly gets rid of some FNs (which means it can also
introduce FPs) in the `std::atomic` tests because a path condition
becomes feasible with havoc'ing.
There's a slight refinement possible where we don't havoc pointers to
const but that's more involved and left as future work.
Reviewed By: skcho
Differential Revision: D18726203
fbshipit-source-id: 264b5daeb
Summary:
Turns out code uses atomics in important places, modelling it removes
FPs.
The tests are copied from biabduction and adapted and extended a bit. I
didn't implement compare_exchange primitives for now (plus, giving them
a sequential semantics like in biabduction is probably a bit cheeky).
Reviewed By: skcho
Differential Revision: D18708576
fbshipit-source-id: a3581b8a4
Summary:
This diff adds inferbo's interval values to pulse's attributes. The added values will be used to
filter out infeasible passes in the following diffs.
Reviewed By: jvillard
Differential Revision: D18726667
fbshipit-source-id: c1125ac6e
Summary:
Note: Disabled by default.
Having some support for values, we can report when a null or constant
value is being dereferenced. The particularity here is that we don't
report when 0 is a possible value for the address, or even if we know
that the value of the address can only be 0 in that branch! Instead, we
allow ourselves to report only when we the address has been *set* to
NULL (or any constant).
This is in line with how pulse deals with other issues: only report when
1. we see an address become invalid, and
2. we see the same address be used later on
Reviewed By: skcho
Differential Revision: D17665468
fbshipit-source-id: f1ccf94cf
Summary:
This adds a more interesting value domain to pulse: concrete intervals.
There are still two main limitations:
1. arithmetic operations are all over-approximated: any assignment involving arithmetic operations is replaced by non-determinism
2. abstract values that are discovered to be equal are not merged into one
Reviewed By: skcho
Differential Revision: D18058972
fbshipit-source-id: 0492a590f
Summary:
This does several things because it was hard to split it more:
1. Split most of the arithmetic reasoning to PulseArithmetic.ml. This
doesn't need to be reviewed thoroughly because an upcoming diff
changes the domain from just `EqualTo of Const.t` to an interval domain!
2. When going through a prune node intra-procedurally, abduce arithmetic
facts to the pre (instead of just propagating them). This is the "assume
as assert" trick used by biabduction 1.0 too and allows to propagate
arithmetic constraints to callers.
3. Use 2 when applying summaries by pruning specs whose preconditions
have un-satisfiable arithmetic constraints.
This changes one of the tests! Pulse now does a bit more work to find
the false positive, as can be seen in the longer trace.
Reviewed By: skcho
Differential Revision: D18117160
fbshipit-source-id: af3b2c8c0
Summary: In preparation for improvements to the arithmetic reasoning.
Reviewed By: dulmarod
Differential Revision: D17977207
fbshipit-source-id: ee98e0772
Summary:
bigmacro_bender
There are 3 ways pulse tracks history. This is at least one too many. So
far, we have:
1. "histories": a humble list of "events" like "assigned here", "returned from call", ...
2. "interproc actions": a structured nesting of calls with a final "action", eg "f calls g calls h which does blah"
3. "traces", which combine one history with one interproc action
This diff gets rid of interproc actions and makes histories include
"nested" callee histories too. This allows pulse to track and display
how a value got assigned across function calls.
Traces are now more powerful and interleave histories and interproc
actions. This allows pulse to track how a value is fed into an action,
for instance performed in callee, which itself creates some more
(potentially now interprocedural) history before going to the next step
of the action (either another call or the action itself).
This gives much better traces, and some examples are added to showcase
this.
There are a lot of changes when applying summaries to keep track of
histories more accurately than was done before, but also a few
simplifications that give additional evidence that this is the right
concept.
Reviewed By: skcho
Differential Revision: D17908942
fbshipit-source-id: 3b62eaf78
Summary:
- add the variable being declared so we can report it back in the trace in addition to its location
- distinguish between local vars and formals
Reviewed By: skcho
Differential Revision: D17930348
fbshipit-source-id: a5b863e64
Summary:
When we make the decision to go into a branch "v = N" where some
abstract value is compared to a constant, remember the corresponding
equality. This allows to prune simple infeasible paths
intra-procedurally.
Further work is needed to make this useful interprocedurally, for
instance either or both of these ideas could be explored:
- abduce v=N in the precondition and do not apply summaries when the
equalities in the pre are not satisfied
- prune post-conditions that lead to unsat states where a value has to
be equal to several different constants
Reviewed By: skcho
Differential Revision: D17906166
fbshipit-source-id: 5cc84abc2
Summary:
When we know "x = 3" and we have a condition "x != 3" we know we can
prune the corresponding path.
Reviewed By: skcho
Differential Revision: D17665472
fbshipit-source-id: 988958ea6
Summary:
Unfortunately it is very hard to predict when
`Typ.Procname.describe` will add `()` after the function name, so we
cannot make sure it is always there.
Right now we report clowny stuff like "error while calling `foo()()`",
which this change fixes.
Reviewed By: ezgicicek
Differential Revision: D17665470
fbshipit-source-id: ef290d9c0
Summary:
Pulse didn't treat local variables going out of scope as invalidating the corresponding address in memory. This diff fixes that by
- marking all local variables that exits the scope with the attribute `AddressOfStackVariable`
- before we write the summary for the proc, we make sure to invalidate all such addresses local to the procedure as `Invalid.` If such an address is read, then we would raise a use-after-lifetime issue.
Reviewed By: jvillard
Differential Revision: D16458355
fbshipit-source-id: 3686524cb
Summary:
A common gotcha is the new test. Model the minimum amount of
`std::basic_string` to catch it.
Reviewed By: mbouaziz, ngorogiannis
Differential Revision: D16121090
fbshipit-source-id: 66f06cb43
Summary:
Be more flexible in what type of function calls are allowed in `ViaCall ...` actions to be able to include models.
Also get rid of `here here` in traces /o\
As a side-effect, get more precise (=qualified) procedure names in
traces (but not in messages so as not to be too verbose).
Reviewed By: mbouaziz, ngorogiannis
Differential Revision: D16121092
fbshipit-source-id: fb51b02f8
Summary:
This is needed to test some functionality in the next diff. Only one
test changes (no longer a FN), which is now documented. Also, stop
including the "header models" meant for biabduction!
Maybe one day we'll need to have several test modes for different C++
versions. Seems overkill for now, so let's wait until we see some actual
issues (eg FPs) that manifest in one version but not the other.
Reviewed By: mbouaziz
Differential Revision: D16073630
fbshipit-source-id: 1cfdfc933
Summary:
Sometimes the post of a function call has attributes on addresses that
were mentioned in the pre but are no longer reachable in the post. We
don't want to forget these, see added test.
Reviewed By: mbouaziz
Differential Revision: D16050050
fbshipit-source-id: 1ce522b97
Summary: Not sure if anyone uses this but there, now it's modelled.
Reviewed By: mbouaziz
Differential Revision: D16008162
fbshipit-source-id: f4795dcba
Summary:
Prevent false positives about variables captured by value gone out of
scope.
Reviewed By: ezgicicek
Differential Revision: D16008165
fbshipit-source-id: d70e47db4
Summary: We know how to do interprocedural calls so let's use that!
Reviewed By: mbouaziz
Differential Revision: D16008164
fbshipit-source-id: 4c34bf704
Summary:
`function::operator=` is called whenever we assign a literal lambda to a
variable, so it's pretty useful to be able to report anything on
lambdas.
Reviewed By: mbouaziz
Differential Revision: D16008163
fbshipit-source-id: a9d07668d
Summary:
Printing `Exp.Const (Cfun proc_name)` adds `_fun_` in front of the
procedure name, eg `_fun_foo` instead of `foo`. This showed up in pulse
traces.
Reviewed By: mbouaziz
Differential Revision: D16004606
fbshipit-source-id: 72ac6866f
Summary:
[apologies for the unreviewable diff...]
Get rid of HIL expressions in pulse. This finishes the HIL -> SIL
migration. The first step made pulse start from SIL instructions but
would translate most accesses to HIL to re-use most of the existing
pulse code. This diff gets rid of the intermediate translation of SIL
expressions to HIL expressions.
Big changes:
1. `PulseOperations` mostly rewritten, driven by using `Exp.t` instead of `HilExp.AccessExpression.t` for everything.
2. Stop trying to reverse-engineer what addresses mean in terms of
access paths from program variables. Rely on the trace pointing at
the right places in the code to be enough. This is because it wasn't
that useful (and could even be misleading when wrong) but could be
prohibitively expensive in degenerate cases (eg nodes with tens of
thousands of successive array accesses...)
3. `PulseAbductiveDomain.apply_post` now returns the computed return
value instead of recording it itself.
4. Change of vocabulary: `materialize` -> `eval`, `crumb` -> `event`
5. Function calls arguments are now evaluated prior to doing anything
else, which saves everything else from having to (remember to) do
that. In particular, this changes how models look quite a bit.
Reviewed By: mbouaziz
Differential Revision: D15986373
fbshipit-source-id: 1d79935de
Summary: Inject destructor calls to destroy a temporary when its lifetime ends.
Reviewed By: mbouaziz
Differential Revision: D15674209
fbshipit-source-id: 0f783a906
Summary:
Now that HIL doesn't help us anymore we need to reconstruct its mapping
"SIL logical var -> program access path". We already have everything we
need in pulse: it suffices to walk the current memory graph starting
from program variables until we find the value of the temporary we are
interested in.
This diff also builds some type machinery to make sure all accesses are
explained.
Reviewed By: mbouaziz
Differential Revision: D15824959
fbshipit-source-id: 722c81b39
Summary:
It turns out HIL gets in the way of a precise heap analysis. For
instance, instead of:
```
n$0 = *&x.f
_ = delete(&x)
*&y = n$0
```
HIL tries hard to forget about intermediate variables and shows instead
```
_ = delete(&x)
*&y = *&x.f
```
Oops, that's a use-after-delete, whereas the original code was safe.
While it's easy to write SIL programs that are completely unsound for
HIL, they are not generated very often from the frontends. In fact, the
problem became apparent only when making the clang frontend translate
C++ temporaries destructors, which produces the situation above
routinely.
This diff makes the minimal amount of change to make Pulse build and
produce equivalent results (minus HIL bugs) starting from SIL instead of
HIL. The reporting sucks for now because we need to translate SIL
temporaries back into program access paths. This is done in the next
diff.
Reviewed By: mbouaziz
Differential Revision: D15824961
fbshipit-source-id: 8e4e2a3ed
Summary:
In a next diff temporaries will get destructed at the end of their
lifetimes and that naive model would be causing false positives.
The flipside is that we lose all reports on closures for now, will need
to model them separately later.
Reviewed By: mbouaziz
Differential Revision: D15695943
fbshipit-source-id: c2c482c02
Summary:
This messes with the deduplication heuristic when templated function
names show up in the error messages, since the heuristic demands that
the error messages are the same.
Reviewed By: mbouaziz
Differential Revision: D15374333
fbshipit-source-id: 70232d254
Summary:
Improve the error messages, change is more or less documented in the
code.
Reviewed By: mbouaziz
Differential Revision: D15374334
fbshipit-source-id: f1dd54180
Summary:
Before: the trace would explain how a value was invalidated and
accessed, but not how the value that was invalidated had been
constructed.
Now: `PulseTrace.t` records breadcrumbs of how the value was constructed
in addition to the interproc "action" trace leading to the invalidation
or access action.
Concretely:
```
void bad(X &x) {
X *y = x;
X *z = x;
delete y;
access(z);
}
```
will produce the trace:
Invalidation part:
y = x
delete y
Access part:
z = x
access(z)
access to z->f inside of access(z)
Before this diff the "Access part" would be missing the "z = x" part of
the trace, so it might be confusing why `z` has anything to do with `y`.
However, such "breadcrumbs" are not recorded in the inter-procedural
part, only the sequence of calls is. This is a trade-off for simplicity,
maybe it's enough for developers maybe it isn't, we'll find out later.
Reviewed By: jberdine
Differential Revision: D15354438
fbshipit-source-id: 8d0aed717
Summary:
Feedback from peterogithub:
- mention which access path is being invalidated and accessed in the message
- mention the line at which it was invalidated (the line at which it's accessed is already the line at which we report)
- traces for stack variable/C++ temporary address escapes
- delete double implementation of the same functionality in
`PulseTrace`: `location_of_action_start` is the same as
`outer_location_of_action`...
Reviewed By: jberdine
Differential Revision: D14800294
fbshipit-source-id: 3d9ab9b3d
Summary:
Similarly to function parameters (and the return value), we need to
apply the pre/post of a function call to the globals mentioned in its
summary.
- tigthen summaries further to remember only abducible variables in the
post (as well as in the pre)
- take globals into account when applying pre/post pairs
Reviewed By: jberdine
Differential Revision: D14780800
fbshipit-source-id: fc0d180bb
Summary:
Only throw values to the pre if they can be followed from "abducible"
variables: formals of the current method and globals.
Because figuring out if a `Pvar.t` is a formal of the current procedure
is actually a giant pain, hack something not too bad instead:
pre-register all formals at the start of the analysis of the
procedure. Then the only other variables we care about in the
precondition are globals, which we can detect easily.
This is mostly an optimisation (summaries won't include irrelevant
"abduced" facts about the procedure's local variables anymore), but it
also fixes a bug where we would sometimes overwrite things in the pre. I
think that's why the tests improved.
Reviewed By: ngorogiannis
Differential Revision: D14753493
fbshipit-source-id: 08e73637f
Summary:
This mostly doesn't make sense. The only thing this would have been good
for was to give the most accurate result on access paths such as
`*(&(x.f))`, but these are normalised anyway (into `x.f`) so we actually
never see these. That said there might be some use to some similar logic
in the future, but in the meantime let's delete the current feature as
it wasn't thought through.
Reviewed By: ezgicicek
Differential Revision: D14753492
fbshipit-source-id: 597cec027
Summary:
The previous message formatting had regressed and produced non-sensical messages.
More importantly, remove template parameters from error messages to
trigger the heuristic in `InferPrint` that deduplicates errors that are
on the same line with the same error type and message. Without this we
get hundreds of reports that correspond to as many instantiations of the
same code.
Reviewed By: ngorogiannis
Differential Revision: D14747979
fbshipit-source-id: 3c4aad2b1
Summary:
We see the magic function `__variable_initialization` at the point where
the variable is declared, eg `int x = foo()`. It's safe to reset `&x` at
that point. This circumvents an issue that pops up in some rare cases
where the ternary conditional operator `?:` and variable initialization
conspire to produce weird frontend results.
Some test becomes a FN again, but I think it was being reported for the
wrong reasons; will investigate more later.
Reviewed By: ngorogiannis
Differential Revision: D14747980
fbshipit-source-id: e75d6e30f
Summary:
This ensures that each attribute type can only be present once per
address. Makes ~80x time improvement on pathological cases such as
Duff's device.
This introduces a new kind of Set in `PrettyPrintable`.
Reviewed By: mbouaziz
Differential Revision: D14645091
fbshipit-source-id: c7f9b760c
Summary:
Detect when a variable goes out of scope. When that's the case, mark its
address *and* its contents as invalid.
Give subsequent uses a USE_AFTER_LIFETIME error type instead of
USE_AFTER_DESTRUCTOR.
Reviewed By: jberdine
Differential Revision: D14387147
fbshipit-source-id: a2c530fda
Summary:
Instead of emitting an ad-hoc builtin on variable declaration emit a new
metadata instruction. This allows us to remove the code matching on that
ad-hoc builtin that had to be inserted in several checkers.
Inferbo & pulse used that information meaningfully and had to undergo
some minor changes to cope with the new metada instruction.
Reviewed By: ezgicicek
Differential Revision: D14833100
fbshipit-source-id: 9b3009d22
Summary:
Bundle all non-semantic-bearing instructions into a `Metadata _`
instruction in SIL.
- On a documentation level this makes clearer the distinction between
instructions that encode the semantics of the program and those that are
just hints for the various backend analysis.
- This makes it easier to add more of these auxiliary instructions in
the future. For example, the next diff introduces a new `Skip` auxiliary
instruction to replace the hacky `ExitScope([], Location.dummy)`.
- It also makes it easier to surface all current and future such
auxiliary instructions to HIL as the datatype for these syntactic hints
can be shared between SIL and HIL. This diff brings `Nullify` and
`Abstract` to HIL for free.
Reviewed By: ngorogiannis
Differential Revision: D14827674
fbshipit-source-id: f68fe2110
Summary:
Some of these tests were wrong, eg `~lambda()` calls `lambda()` then...
takes the bitwise complement or something? The intent was to call the
destructor.
Add interprocedural tests for later.
Reviewed By: jberdine
Differential Revision: D14324762
fbshipit-source-id: 40d2c32f5
Summary:
Previously we would say that `lhs <= rhs` (or `lhs |- rhs`) when a
mapping existed between the abstract addresses of `lhs` and `rhs` such
that `mapping(lhs)` was a supergraph of `rhs`. In particular,
we had that `x |-> x' * x' |-> x'' |- x |-> x'`. This is not entirely
great, in particular once we get pairs of state representing footprint +
current state. I'm not sure I have an extremely compelling argument why
though, except that it's not the usual way we do implication in SL, but
there wasn't a compelling argument for the previous state of affairs
either.
This changes `|-` to be true only when `mapping(lhs) = rhs` (modulo only
considering the addresses reachable from the stack variables).
Reviewed By: jberdine
Differential Revision: D14568272
fbshipit-source-id: 1bb83950e
Summary: This helps convergence when `<=` is based on physical equality for example, and widening is implemented as `widen ~prev ~next = join prev next`.
Reviewed By: skcho
Differential Revision: D14568270
fbshipit-source-id: ded5ed296
Summary:
When joining two lists of disjuncts we try to ensure there isn't a state
that under-approximates another already in the list. This helps reduce
the number of disjuncts that are generated by conditionals and loops.
Before we would always just add more disjuncts unless they were
physically equal but now we do a subgraph computation to assess
under-approximation.
We only do this half-heartedly for now however, only taking into
consideration the "new" disjuncts vs the "old" ones. It probably makes
sense to do a full quadratic search to minimise the number of disjuncts
from time to time but this isn't done here.
Reviewed By: mbouaziz
Differential Revision: D14258482
fbshipit-source-id: c2dad4889
Summary:
The disjunctive domain shouldn't really be a set in the first place as
comparing abstract states for equality is expensive to do naively
(walking the whole maps representing the abstract heap). Moreover in
practice these sets have a small max size (currently 50 for pulse, the
only client), so switching them to plain lists makes sense.
Reviewed By: mbouaziz
Differential Revision: D14258489
fbshipit-source-id: c512169eb
Summary:
It's useful to keep the size of states down, especially when humans are
trying to read it. It will also help keep the size of summaries down in
the inter-procedural pulse.
Reviewed By: mbouaziz
Differential Revision: D14258486
fbshipit-source-id: 45ebcac67
Summary:
Record per-location traces. Actually, that doesn't quite make sense as a
location can be accessed in many ways, so associate a trace to each
*edge* in the memory graph. For instance, when doing `x->f = *y`, we
want to take the history of the `<val of y> --*--> ..` edge, add "assigned
at location blah" to it and store this extended history to the edge
`<val of x> --f--> ..`.
Use this machinery to print nicer traces in `infer explore` and better
error messages too (include the last assignment, like biabduction
messages).
Reviewed By: da319
Differential Revision: D13518668
fbshipit-source-id: 0a62fb55f
Summary:
When a C++ temporary goes out of scope, tag its address in the heap with
a new attribute `AddressOfCppTemporary` so that we can later check that
we don't return it.
Reviewed By: da319
Differential Revision: D13466898
fbshipit-source-id: 8808338b4
Summary:
When assign to the special `return` variable, check that the result is
not the address of a local variable, otherwise report.
Reviewed By: ngorogiannis
Differential Revision: D13466896
fbshipit-source-id: 465da7f13
Summary:
It's ok to take an address of a field / array access of an invalid object.
This diff calculates the inner most dereference for an access expression starting with `&` and does not report on the dereference even if the address is invalid.
Reviewed By: jvillard
Differential Revision: D13450758
fbshipit-source-id: 18c038701
Summary:
When we create Dereference edge, we also create TakeAddress back edge. This causes false positives for stack variables. When we write to a stack variable and then take its address, the resulting address is the one from the back edge of the written value. See example `push_back_value_ok`. To solve this issue, this diff changes stack to denote a map from address of variables rather than from variables.
We still have issue for fields, see example, FP_push_back_value_field_ok. To solve this, we probably need to remove back edges.
Reviewed By: jvillard
Differential Revision: D13432415
fbshipit-source-id: 9254a1a6d
Summary:
When a lambda gets created, record the abstract addresses it captures, then
complain if we see some of them be invalidated before it is called.
Add a notion of "allocator" for reporting better messages. The messages are
still a bit sucky, will need to improve them more generally at some point.
```
jul lambda ~ infer 1 infer -g --pulse-only -- clang -std=c++11 -c infer/tests/codetoanalyze/cpp/pulse/closures.cpp
Logs in /home/jul/infer.fb/infer-out/logs
Capturing in make/cc mode...
Found 1 source file to analyze in /home/jul/infer.fb/infer-out
Found 2 issues
infer/tests/codetoanalyze/cpp/pulse/closures.cpp:21: error: USE_AFTER_DESTRUCTOR
`&(f)` accesses address `s` captured by `&(f)` as `s` invalidated by destructor call `S_~S(s)` at line 20, column 3 past its lifetime (debug: 5).
19. f = [&s] { return s.f; };
20. } // destructor for s called here
21. > return f(); // s used here
22. }
23.
infer/tests/codetoanalyze/cpp/pulse/closures.cpp:30: error: USE_AFTER_DESTRUCTOR
`&(f)` accesses address `s` captured by `&(f)` as `s` invalidated by destructor call `S_~S(s)` at line 29, column 3 past its lifetime (debug: 8).
28. f = [&] { return s.f; };
29. }
30. > return f();
31. }
32.
Summary of the reports
USE_AFTER_DESTRUCTOR: 2
```
Reviewed By: da319
Differential Revision: D13400074
fbshipit-source-id: 3c68ff4ea
Summary: Model more `std::vector` functions that can potentially invalidate references to vector's elements (https://en.cppreference.com/w/cpp/container/vector).
Reviewed By: mbouaziz
Differential Revision: D13399161
fbshipit-source-id: 95cf2cae6
Summary: Similarly as `std::vector::push_back`, `std::vector::reserve` can invalidate the references to elements if the new size is bigger than the existing one. More info on `std::vector::reserve`: https://en.cppreference.com/w/cpp/container/vector/reserve
Reviewed By: jvillard
Differential Revision: D13340324
fbshipit-source-id: bf99b6923
Summary: Instead of variable having the value of a single location on stack, we now allow variables to have multiple locations. Consequently, we also allow a memory location to point to a set of locations in the heap. We enforce a limit on a maximum number of locations in a set (currently 5).
Reviewed By: jvillard
Differential Revision: D13190876
fbshipit-source-id: 5cb5ba9a6
Summary: Recent improvements in join fixed `FP_allocate_in_branch_ok` because the variable was not read after the join.
Reviewed By: mbouaziz
Differential Revision: D13233441
fbshipit-source-id: 89b701e12
Summary:
It's useful for checkers to know when variables go out of scope to
perform garbage collection in their domains, especially for complex
domains with non-trivial joins. This makes the analyses more precise at
little cost.
This could have been added as a custom function call to a builtin, but I
decided against it because this instruction doesn't have the semantics
of any function call. It's better for each checker to explicitly not
deal with the custom instruction instead.
Reviewed By: jberdine
Differential Revision: D13102951
fbshipit-source-id: 33be22fab
Summary:
I hear that this scheduler is better. I want the best scheduler
possible. Also pulse's join is a bit complex so it might matter one day.
whydididothis
Reviewed By: mbouaziz
Differential Revision: D12958131
fbshipit-source-id: 3bd77ccba
Summary: For a general case of `operator=` we want to create a fresh location for the first parameter as `operator=` behaves as copy assignment.
Reviewed By: jvillard
Differential Revision: D12940635
fbshipit-source-id: 89c6e530d
Summary:
Whenever `vec.reserve(n)` is called, remember that the vector is
"reserved". When doing `vec.push_back(x)` on a reserved vector, assume
enough size has been reserved in advance and do not invalidate the
underlying array.
This gets rid of false positives.
Reviewed By: mbouaziz
Differential Revision: D12939837
fbshipit-source-id: ce6354fc5
Summary:
Instead of keeping at most one invalidation fact for each address, keep
a set of them and call them "attributes". Keeping a set of invalidation
facts is redundant since we always only want the smallest one, but
makes the implementation simpler, especially once we add more kinds of
attributes (used for modelling, see next diffs).
Reviewed By: mbouaziz
Differential Revision: D12939839
fbshipit-source-id: 4a54c2132
Summary:
Copied on the ownership checker logic: return the initial value of the
domain as return. This can probably be improved.
Reviewed By: mbouaziz
Differential Revision: D12888102
fbshipit-source-id: 9e2dac7fc
Summary:
When initialising a variable via semi-exotic means, the frontend loses
the information that the variable was initialised. For instance, it
translates:
```
struct Foo { int i; };
...
Foo s = {42};
```
as:
```
s.i := 42
```
This can be confusing for backends that need to know that `s` actually
got initialised, eg pulse.
The solution implemented here is to insert of dummy call to
`__variable_initiazition`:
```
__variable_initialization(&s);
s.i := 42;
```
Then checkers can recognise that this builtin function does what its
name says.
Reviewed By: mbouaziz
Differential Revision: D12887122
fbshipit-source-id: 6e7214438
Summary:
Now that arrays are dealt with separately (see previous diff), we can
turn the join back into an over-approximation as far as invalid
locations are concerned.
Reviewed By: skcho
Differential Revision: D12881989
fbshipit-source-id: fd85e49c0
Summary:
This prevents the join from wrongly assuming that we haven't seen a
variable on one side of the join.
Reviewed By: skcho
Differential Revision: D12881987
fbshipit-source-id: 42a776adb
Summary: For `operator=(lhs, rhs)` we want to model it as an assignment if rhs is materialized temporary created in the constructor.
Reviewed By: jvillard
Differential Revision: D10462510
fbshipit-source-id: 998341e69
Summary: Do not create a new location for placement new argument if it already exists.
Reviewed By: jvillard
Differential Revision: D12839942
fbshipit-source-id: 758b67a82
Summary:
Get rid of `USE_AFTER_LIFETIME`. This could be useful to deploy pulse
alongside the ownership checker too.
Reviewed By: da319
Differential Revision: D12857477
fbshipit-source-id: 8e2a2a37c
Summary:
Keep `USE_AFTER_LIFETIME` for unclassified errors (for now it contains
vector invalidation too because I can't think of a good name for
them, and maybe it makes sense to wait until we have more types of them
to decide on a name).
Reviewed By: da319
Differential Revision: D12825060
fbshipit-source-id: bd75ef698
Summary:
Getting this right will be long and complex so for now the easiest is to
underreport and only consider as invalid the addresses we know to be invalid on
both sides of a join. In fact the condition for an address to be invalid after
a join is more complex than this: it is invalid only if *all* the addresses in
its equivalence class as discovered by the join are invalid.
Reviewed By: skcho
Differential Revision: D12823925
fbshipit-source-id: 2ca109356
Summary: Similarly as for destructors, we provide an address of an object as a first parameter to constructors. When constructor is called we want to create a fresh location for a new object.
Reviewed By: jvillard
Differential Revision: D10868433
fbshipit-source-id: b60f32953
Summary: We provide an address of an object as a parameter to destructor. When destructor is called the object itself is invalidated, but not the address.
Reviewed By: jvillard
Differential Revision: D12824032
fbshipit-source-id: 516eebcf8
Summary:
The time has come to keep track of which tests pass and which are FP/FN
for pulse.
Reviewed By: mbouaziz
Differential Revision: D10854064
fbshipit-source-id: 60938e48f
Summary:
Turns out once a vector array became invalid it stayed that way, instead
of the vector getting a new valid internal array.
Reviewed By: skcho
Differential Revision: D10853532
fbshipit-source-id: f6f22407f
Summary:
Now the domain can reason about `&` and `*` too. When recording `&`
between two locations also record a back-edge `*`, and vice-versa.
Reviewed By: mbouaziz
Differential Revision: D10509335
fbshipit-source-id: 8091b6ec0
Summary: This is more flexible and allows us to give more details when reporting.
Reviewed By: mbouaziz
Differential Revision: D10509336
fbshipit-source-id: 79c3ac1c8
Ezgi Çiçek
Jules Villard
Sungkeun Cho
Peter O'Hearn
David Lively
Jeremy Dubreil
Daiva Naudziuniene