Summary:
Change ocamlformat installation procedure to use opam instead of
pinning.
Reformat all code with v0.2, which has a few improvements.
Reviewed By: jvillard
Differential Revision: D6292057
fbshipit-source-id: 759967f
Summary:
Install ocamlformat from github as part of `make devsetup`, and use it
for formatting OCaml (and jbuild) code.
Reviewed By: jvillard
Differential Revision: D6092464
fbshipit-source-id: 4ba0845
Summary:
Use an SQLite database to store proc attributes, instead of files on disk.
Wrap SQLite operations in two layers:
1. `SqliteUtils` provides helper functions to make sure DB operations succeed
2. `KeyValue` provides a functor to expose a simple and type-safe key/value store backed by the SQLite DB.
Reviewed By: jberdine
Differential Revision: D5640053
fbshipit-source-id: 31050e5
Summary:
- failwith police: no more `failwith`. Instead, use `Logging.die`.
- Introduce the `SimpleLogging` module for dying from modules where `Logging`
cannot be used (usually because that would create a cyclic dependency).
- always log backtraces, and show backtraces on the console except for usage errors
- Also point out in the log file where the toplevel executions of infer happen
Reviewed By: jeremydubreil
Differential Revision: D5726362
fbshipit-source-id: d7a01fc
Summary:
Conversion and reformat of infer source using ocamlformat
auto-formatting tool.
Current status:
- Because Reason does not handle docstrings, the output of the
conversion is not 'Warning 50'-clean, meaning that there are
docstrings with ambiguous placement. I'll need to manually fix
them just before landing.
Reviewed By: jvillard
Differential Revision: D5225546
fbshipit-source-id: 3bd2786
Summary:
Change the API of `Logging` wrt to writing to files and to the console (see
changes in logging.mli).
Write only to one log file: infer-out/log. Prefix each line with the kind of
warning and the PID of the process emitting it. Writing with `O_APPEND` is
atomic so the file should not get garbled by concurrent writes. To get the
output of a single process, find out which one interests you by looking at
infer-out/log, then `grep ^[<PID>] infer-out/log`.
Introduce 3 log levels for debug output and command-line options to set them
for various categories individually.
Change tons of `"\n"` to `"@\n"` so the `Format` module is aware of newlines
without us having to look through every character of every logged string for
`\n` characters.
Reviewed By: mbouaziz
Differential Revision: D5165317
fbshipit-source-id: 93c922f
Summary:
Try and enforce the following rules:
- stderr is for updating the user about progress or errors
- Introduce Logging.progress that outputs to stderr, but honours --quiet
- Logging.stderr is as before
- Logging.out now prints to stderr (or to log files as before if set up) and
not stdout. If some information should go on stdout then the user should be
able to rely on it (ie, it's not just some progress message). For now only
the summary of the errors is printed on stdout by default.
- Logging.err* functions are gone. If the error is user-visible, it should be
Logging.stderr, or `failwith`. If not, go to the same log file as other
output, which personally I find much more convenient than having to dig through
2 log files every time I'm looking for some output.
Reviewed By: jberdine
Differential Revision: D5095720
fbshipit-source-id: 68999c9
Summary: The Java frontend creates a single `tenv` file per `javac` invocation, but the code loading the `tenv` for a given Java procedure in the backend was not taking advantage of it. Also, with the lazy dynamic dispatch algorithm, the procedure name can be created on-demand and therefore defeat the approach to load the tenv by looking at the call graph to associate existing procedure names to the corresponding serialized tenv file. This diff should also fix this last point.
Reviewed By: sblackshear
Differential Revision: D4969254
fbshipit-source-id: 66ed318
Summary:
Limit the use of `SourceFile.invalid` (renamed from `SourceFile.empty`) as much
as possible. In particular, do not generate bogus procnames for external global
variables: their translation unit was set to the invalid source file, now we
distinguish between extern/non-extern global variables more explicitly.
`SourceFile.invalid` is still used in too many places to actually remove it, often as a dummy initial value that never gets used, but sometimes as an actual value... Worse, we cannot fail on all operations on `SourceFile.Invalid` yet: the `SourceFile.to_string` method is used in too many places where it could get `SourceFile.Invalid` as argument. It's easy to see where it's used by making it raise in the code, then running the tests. This results in spaghetti backtraces that are hard to trace back to a root cause.
Reviewed By: akotulski, jeremydubreil
Differential Revision: D4860019
fbshipit-source-id: 45be040
Summary:
All tests were redirecting `stderr` into duplicates.txt which made it much harder to see other error messages in stderr (such as uncaught exceptions).
To mitigate it, write duplicates to separate file and don't redirect `stderr` to another file.
Reviewed By: jvillard
Differential Revision: D4728938
fbshipit-source-id: 8ad2fc8
Summary:
Add a new command-line option `--per-procedure-parallelism`, to change the granularity of parallelism of the analysis from file to procedure.
This is intended for `--reactive` mode where e.g. a single file is changed and the analysis currently uses just one core.
When the option is used, the Makefile mechanism is replaced by using forking instead.
The parent process does as little allocation as possible, to avoid taxing the kernel.
Caveats:
- Not active in Java, (issues with camlzip).
- Not active in checkers, yet.
Example use:
```
infer --reactive --changed-files-index index.txt --per-procedure-parallelism -- analyze
```
Reviewed By: jberdine
Differential Revision: D4634884
fbshipit-source-id: e358c18
Summary: 957b243 removed the last use of `Exe_env.get_tenv ~create:true`
Reviewed By: jeremydubreil
Differential Revision: D4364521
fbshipit-source-id: 819efee
Summary: Allow backend to trigger compilation of extra files when it needs them. This will allow infer to capture less files initally and possibly speed up compilation
Reviewed By: cristianoc, jberdine
Differential Revision: D4231581
fbshipit-source-id: 181abea
Summary:
Use In_channel and Out_channel operations instead of those in Pervasives. Don't
use physical equality on values that aren't heap-allocated since it doesn't help
the compiler generate faster code and the semantics is unspecified. Also use
phys_equal for physical equality.
Reviewed By: sblackshear
Differential Revision: D4232459
fbshipit-source-id: 36fcfa8
Summary:
Utils contains definitions intended to be in the global namespace for
all of the infer code-base, as well as pretty-printing functions, and
assorted utility functions mostly for dealing with files and processes.
This diff changes the module opened into the global namespace to
IStd (Std conflict with extlib), and moves the pretty-printing
definitions from Utils to Pp.
Reviewed By: jvillard
Differential Revision: D4232457
fbshipit-source-id: 1e070e0
Summary:
Functions related to source files were already namespaced by `source_file_` prefix. Make separate module for them.
In high level it replaces all `source_file_` with `SourceFile.` and then fixes all remaining compilation errors
Reviewed By: jvillard
Differential Revision: D4299053
fbshipit-source-id: 20b1d39
Summary:
`DB.source_file_to_string` is very easy to misuse and it shouldn't even exist.
In preparation for that day, replace most of `source_file_to_string` with `source_file_pp`
Reviewed By: jvillard
Differential Revision: D4258390
fbshipit-source-id: 447cf5a
Summary:
Location.nLOC was introducing a lot of complexity for little benefit (and edge cases were wrong anyway).
We can restore it in some simplified way if we find that we need it
Reviewed By: jeremydubreil
Differential Revision: D4139868
fbshipit-source-id: 4f8e033
Summary:
This fixes a perf issue on large files, where a copy of the type environment and control flow graph were loaded for each procedure analyzed in the file.
If the type environment or the control flow graph are big, and the file contains many procedures, this can cause a big memory overhead.
Reviewed By: jvillard
Differential Revision: D4008655
fbshipit-source-id: 11d07c1
Summary:
The global reference `DB.current_source` is used internally in the module DB, by all the front-ends, and directly and indirectly by the back-end, including saving and restoring the state in case of on-demand procedure calls. In particular, it is heavily used in printing functions.
This diff cleans up the flow of information about what the current file is, making it explicit, and removes the reference.
Reviewed By: jberdine
Differential Revision: D3901247
fbshipit-source-id: ef596bd
Summary:
Simplify DB initialization by removing some unit functions, since
Config values are now already initialized at module load time.
Reviewed By: akotulski
Differential Revision: D3522728
fbshipit-source-id: ac93d30
Summary:public
Eliminate the use of the -open Utils command line option passed to the compiler in favor of `open! Utils` in each source file. While slightly convenient, this option causes more headaches than it is worth with other tools e.g. merlin.
Reviewed By: jvillard
Differential Revision: D3168193
fb-gh-sync-id: 4285ef6
fbshipit-source-id: 4285ef6
Summary:public
Remove back-end infrastructure that exists only when on-demand mode is disabled.
This, together with removing a few command-line options, sheds a lot of weight in the back-end.
No changes expected for on-demand mode.
Reviewed By: sblackshear
Differential Revision: D2960242
fb-gh-sync-id: 220d821
shipit-source-id: 220d821
Summary:public
Deprecate the incremental mode.
Several parts of the back-end can be removed.
The options for incremental analysis -i at the python level are now deprecated, and re-routed to --reactive.
The main difference with --reactive is that it does not produce an analysis of the whole project, but is limited to what is reachable via reactive propagation starting from the changed files.
Reviewed By: sblackshear
Differential Revision: D2960078
fb-gh-sync-id: 6e8b46b
shipit-source-id: 6e8b46b
Summary:public
I have seen enough comments in this space by people during code review to switch on the analyses the compiler can already do. This diff is an automated renaming of unused identifiers to _, with a few additional changes made when reading the diff of the results for things that stood out as particularly strange. This base-lines all of the existing warnings. I'm not sure this is a good idea, since it might be better for those familiar with each part of the code to look at these warnings and use them as pointers to suspicious code.
Reviewed By: jeremydubreil
Differential Revision: D2938376
fb-gh-sync-id: 6e67817
shipit-source-id: 6e67817
Summary:
public This assert false causes the whole analysis to crash.
It is currently happening intermittently which makes it hard to debug.
Other inconsistencies don't cause the whole analysis to crash normally,
so this one seems to be too strict.
Reviewed By: cristianoc
Differential Revision: D2849864
fb-gh-sync-id: de6dce0
Summary:
public there was a problem with
templated method names that had '/' in its names.
This happened for names like this: `method_name<(anonymous lambda in path/to/src:1:1)>`
Plus random fix to backend logging
Reviewed By: dulmarod
Differential Revision: D2749359
fb-gh-sync-id: b9a0fcd
Summary: public
modules are better for namespacing.
How I made this diff:
1. moved list_* functions from utils.ml{,i} to iList.ml{,i}
2. shell commands:
grep '^val ' infer/src/backend/iList.mli | cut -f 2 -d ' ' | tr '\n' ' '
# gives a list of former list_ functions that IList implements, fed into the loops below:
LISTNAMES=" compare equal append combine exists filter flatten flatten_options find fold_left fold_left2 for_all for_all2 hd iter iter2 length fold_right map mem nth partition rev rev_append rev_map sort split stable_sort tl drop_first drop_last rev_with_acc remove_duplicates remove_irrelevant_duplicates merge_sorted_nodup intersect mem_assoc assoc map2 to_string"
# replace " list_*" function calls with IList.* ones
for i in $LISTNAMES; do find . -name '*.ml' -exec sed -i -e "s/ list_$i\b/ IList.$i/g" \{\} \; ; done
# replace (list_* functions with (IList.* ones
for i in $LISTNAMES; do find . -name '*.ml' -exec sed -i -e "s/(list_$i\b/(IList.$i/g" \{\} \; ; done
# ditto with [
for i in $LISTNAMES; do find . -name '*.ml' -exec sed -i -e "s/\[list_$i\b/[IList.$i/g" \{\} \; ; done
3. Then fix up the rest by hand. In particular, stuff that called Utils.list_*
explicitely, and stuff that used the "Fail" exception that has moved to
IList. (may revisit this in the future)
Reviewed By: jeremydubreil, cristianoc
Differential Revision: D2550241
fb-gh-sync-id: cd64b10
Josh Berdine
Jules Villard
Sam Blackshear
Jeremy Dubreil
Andrzej Kotulski
Cristiano Calcagno
Dulma Rodriguez