Summary:
Ever since deadcode/dune stopped being a dune.in file that created the
dune file on the fly, `make check` stopped working because it now tried
to build the "deadcode" executable but usually all_infer_in_one_file.ml
isn't around and so it fails. Only create deadcode/dune when needed to
avoid dune taking deadcode/ into account on most operations.
Reviewed By: ezgicicek
Differential Revision: D21528811
fbshipit-source-id: 040e4c138
Summary:
- move unit/clang/ to clang/unit/ and make it a dune library
- move unit/nullsafe/ to nullsafe/unit/ and make it a dune library
- make unit/ a dune library
- inline most of dune.common.in into dune.in and make more explicit
rules for each binary as they don't depend on the same libraries
- move inferunit from unit/ to ./ like the other toplevel binaries
Reviewed By: skcho
Differential Revision: D21440822
fbshipit-source-id: 075c693e0
Summary:
Using the same trick as for the java frontend: define a dune library
that takes either all the modules in the directory (except possibly
stubs) or none of the modules (except possible stubs).
In order to break the circular dependency between al/ and clang/,
introduce a dirty callback in clang/.
Reviewed By: dulmarod
Differential Revision: D21440823
fbshipit-source-id: ac6b40b4e
Summary:
Kill java_stubs/ with this one easy trick:
- java/dune contains either the "normal" modules or just the
JavaFrontendStubs module
- libraries that depend on java need to open JavaFrontendStubs if java
is disabled to bring the expected modules from java/ into their
namespace
Also needed to move biabduction/Prover.Subtyping_check to
absint/SubtypingCheck because the Java frontend was using it.
Reviewed By: ngorogiannis
Differential Revision: D21435937
fbshipit-source-id: af957253a
Summary:
- Open-source stubs are in a library with no dependencies
- That library is included in InferBase, but in facebook builds it
contains no modules
Reviewed By: ezgicicek
Differential Revision: D20922574
fbshipit-source-id: af918a687
Summary:
Main changes are:
1. Dune can promote targets into the source tree as a part of build. This
allows us to **remove custom promotion/installation logic in src/Makefile**.
2. Dune promotion only works for path within workspace. This required
**moving dune-workspace one folder up**: from infer/infer/src to infer/infer.
But this is not bad, since it makes it possible to migrate tests under dune at some point.
3. `checkCopyright` now also promoted into `infer/infer/bin` instead of
`infer/scripts` partly for consistency and partly because of the
dune-workspace location.
4. `byte` mode was replaced with `byte_complete`. The latter takes
similar amount of time to build compared to `byte`, but produces
standalone binaries that don't require InferCStubs to be
installed. This allowed to remove `dune_exec_shim` and custom logic
around `dune build InferCStubs.install` when dealing with byte
targets.
All in all, `infer/src/Makefile` is not about 2/3 its previous size
with less custom logic in Makefiles/scripts and more encoded in dune
build files.
Reviewed By: jvillard
Differential Revision: D20303902
fbshipit-source-id: 9e4c65bd0
Summary:
With the introduction of environments and profiles we no longer need
to generate most dune files in libraries via make. Also, those dune
builds don't need to be in OCaml.
In addition to converting build files to plain sexp definitions, this
patch also:
- Adjusts copyrightCheck to work correctly with sexp-based dune files.
- Adds auto-formatting for sexp-based dune files.
Reviewed By: jvillard
Differential Revision: D20250208
fbshipit-source-id: 495aeaa99
Summary: This diff finds dead modules, i.e, .ml files that is not used in the binaries.
Reviewed By: ngorogiannis
Differential Revision: D20035984
fbshipit-source-id: 56ac2e817
Summary: This tests the previous commit D17093980, which moves incremental analysis to run before capture
Reviewed By: ngorogiannis
Differential Revision: D17113475
fbshipit-source-id: 702d967b3
Summary: Test that cost analysis works with incremental analysis enabled
Reviewed By: ezgicicek
Differential Revision: D16620101
fbshipit-source-id: b41403954
Summary:
Add test `incremental_analysis_remove_file` to the toplevel makefile so that it is called by `make test` etc
Also swapped the src_before and src_after files so the test checks file removal instead of addition.
Reviewed By: jvillard
Differential Revision: D16562340
fbshipit-source-id: 79bab5f66
Summary:
A test that records the expected output of:
- reverse analysis call graph
- introduced/pre-existing/fixed issues
- cost analysis results
Currently only the call graph is non-empty.
Reviewed By: PhoebeMay
Differential Revision: D16495470
fbshipit-source-id: f186d73d2
Summary:
Switches from opam 1 to opam 2.
Opam2 has some cool new features that simplify some of the scripting.
Notable changes:
1. Use the new `opam lock` *plugin* from https://github.com/AltGr/opam-lock/ instead of https://github.com/rgrinberg/opam-lock. This has a simpler interface for our purposes.
2. Change the way `./build-infer.sh` can be called to use an already existing switch: simply pass `--user-opam-switch` to the script and it won't attempt to create/set the current switch. This can be used to build infer in a local switch for instance.
3. Take advantage of automatic pinning where possible, eg to install infer deps without using opam.locked.
Reviewed By: ngorogiannis
Differential Revision: D13167863
fbshipit-source-id: 1a667c270
Summary: Experimental feature: Use memcached for summaries as a look-aside cache during analysis.
Reviewed By: jvillard
Differential Revision: D12939311
fbshipit-source-id: 9f78994e2
Summary:
This allows infer devs to see the effects their changes have on the infer manuals.
Check in the manuals for each subcommand + the output of `--help-full` to get a
complete picture. If this is too annoying we can also check in only
`--help-full`.
Reviewed By: mbouaziz
Differential Revision: D9916404
fbshipit-source-id: b981e2c33
Summary:
Some paths are hardcoded in infer as being relative to the current executable,
for instance the directory where to find the models. By copying infertop.bc to
infer/bin like we do for `infer` these relative paths lead to the expected
place, which means models can be loaded in the toplevel like they would be in a
normal infer execution. This is more useful for debugging than previously.
Reviewed By: jeremydubreil, mbouaziz
Differential Revision: D9197142
fbshipit-source-id: 48c4f82fb
Summary:
Change the documentation to refer to (upcoming) binary releases. Update the
scripts to treat .release differently: now we want to build clang and the
plugins even in release mode, as that's just the preparation for the release
tarball containing only binaries.
Reviewed By: mbouaziz
Differential Revision: D8235388
fbshipit-source-id: bfb4ae8
Summary:
It works now. Jumping to definition or calling merlin-document on files from
opam libraries doesn't seem to work when several libraries used by infer define
the same module (e.g. string.ml exists in ocaml lib, core_kernel, and base).
Reviewed By: let-def
Differential Revision: D7708218
fbshipit-source-id: 8e74b9b
Summary:
Partial revert of a21644685f / D7381857 due to an
issue introduced in 1.0+beta19 that prevents jbuilder from generating the
correct .merlin (https://github.com/ocaml/dune/issues/657).
Reviewed By: mbouaziz
Differential Revision: D7414970
fbshipit-source-id: 10561e9
Summary:
Looks like the remaining issues were solved. In particular, build the toplevel
with the same ppx as infer so that the ppx information makes it to .merlin.
Reviewed By: mbouaziz
Differential Revision: D7381857
fbshipit-source-id: 5847d56
Summary:
There's actually a nice separation between IR/, base/, istd/, and the rest of
infer, so they can be made into separate jbuilder libraries so that the
separation remains. This helps make sense of the infer codebase.
Also:
- move everything biabduction-related out of backend/ and into a new
biabduction/ directory. This clarifies the current situation where backend/
contains a mix of analysis-independent code (still there now), and
biabduction-specific code (moved to biabduction/).
- move everything from base/ that is not infer-specific into istd/, e.g. IList.ml
- kill unused `FbTraceCalls`
- A couple of files needed to move around to complete the separation of base/ and IR/
Reviewed By: mbouaziz
Differential Revision: D7381842
fbshipit-source-id: cd86dea
Summary:
Record "capture phases" in the runstate and in the source files table of the
database. Use this instead of filesystem timestamps to decide which files need
re-analyzing in the reactive analysis.
Reviewed By: jeremydubreil
Differential Revision: D6760833
fbshipit-source-id: 7955621
Summary:
The infer results directories in buck-out/ are "cleaned up" to avoid polluting
the Buck cache with too much data or non-deterministic data. In particular, the
runstate is deleted, which confused subsequent infer processes trying to read
the pre-existing results directory.
Add a special case in infer to delete pre-existing results directories in
buck-out instead of trying to load their state.
Reviewed By: mbouaziz
Differential Revision: D6845128
fbshipit-source-id: 5c716aa
Summary:
Make dead code detection part of `make test` so that dead code stops creeping
in. It's only enabled if all the analysers are enabled and if this is a
facebook build, because the dead code detection will have false positives
otherwise.
Reviewed By: mbouaziz
Differential Revision: D6807395
fbshipit-source-id: ebbd835
Summary:
Record the db schema, infer version, and run dates into
infer-out/.infer_runstate.json. This allows us to check on startup whether the
results directory was generated using a compatible version of infer or not, and
give a better error message in the latter case than some SQLite error about
mismatching tables.
This will be used in a follow-up diff to record capture phases too, and avoid
relying on filesystem timestamps of the infer-out/capture/foo/ directories for
reactive analysis.
Had to change some tests Makefiles to make sure they do not attempt to re-use
stale infer-out directories, which would now fail the run.
The stale infer-out directory gets deleted if `--force-delete-results-dir` is
passed (but a warning still gets printed).
Reviewed By: mbouaziz
Differential Revision: D6760787
fbshipit-source-id: f36f7df
Summary:
Horrible but somewhat-documented hack to get inter-file dead code analysis for
the OCaml code.
Reviewed By: mbouaziz
Differential Revision: D6724234
fbshipit-source-id: 3a5b9cd
Summary:
No need for our own patched version now that it's available in opam.
You should `opam pin remove --no-action javalib && ./build-infer.sh` to get rid of the previous version.
Reviewed By: mbouaziz
Differential Revision: D6063730
fbshipit-source-id: 8efd598
Summary:
Installing with `opam pin` risks upgrading a lot of package in the current
switch, which is very slow. It's also wasted work since we'll install back
their older versions afterwards with `opam lock`. Moreover, that second step
can now fail if javalib needs to be recompiled (which it seems it does),
because we delete the javalib sources after having pinned them.
Solution: 1. do not install javalib at `opam pin` time, and 2. do not remove its source tree after pinning.
Reviewed By: martinoluca
Differential Revision: D5764153
fbshipit-source-id: 9c9b1c7
Summary:
This gets rid of the horrible hack of asking jbuilder to build
_build/{default,test}/.ppx/ppx_compare/ppx.exe prior to starting several
jbuilds in parallel. We now refrain from starting several jbuilds in parallel.
Also, I finally understood that order-only deps do nothing for phony targets,
and not much else for non-phony ones. I hate make even more.
Reviewed By: jberdine
Differential Revision: D5678699
fbshipit-source-id: 52179e8
Summary:
This simplifies the jbuild files: no need to list these files explicitly
anymore, nor to exclude them explicitly from the main `InferModules` library
(due to their different compilation flags).
Isolate common parts into jbuild.common do `cat`-based code inclusion into
jbuild files to factorize code.
Reviewed By: jberdine
Differential Revision: D5678328
fbshipit-source-id: 6d7d925
Summary:
Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds:
```
times in 10ms, ±differences measured in speedups, 4 cores
| | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys |
|-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------|
| byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 |
| native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 |
| byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 |
| change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 |
| change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 |
| change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 |
| change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 |
| change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 |
| change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 |
#+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2
50 cores
| | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys |
|---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------|
| byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 |
| native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 |
| byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 |
#+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2
```
Menu:
1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in
some information at build-time (really, at configure time, but TODO), such as
whether or not clang is enabled.
2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file
3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help.
4. jbuilder does not support subdirectories, so resort to listing all the
source files in the generated jbuild (only source directories need to be
manually listed in jbuild.in though). Still, the generated .merlin is wrong
and makes merlin find source files in _build, so manually tune it to get
good merlin support. We also lose some of merlin for unit tests as it
cannot see their build artefacts anymore.
5. checkCopyright gets its own jbuild because it's standalone. Also, remove
some deprecation warnings in checkCopyright due to the new version of Core from
a while ago.
6. Drop less-used Makefile features (they had regressed anyway) such as
building individual modules. Also, building mod_dep.pdf now takes all the
source files available so they better build (before, it would only take the
source files from the config, eg with or without clang) (that's pretty minor).
7. The toplevel is now built as a custom toplevel because that was easier. It
should soon be even easier: https://github.com/janestreet/jbuilder/issues/210
8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about
interface files without implementations.
In particular, I did not try to migrate too much of the Makefile logic to jbuilder,
more can be done in the future.
Reviewed By: jberdine
Differential Revision: D5573661
fbshipit-source-id: 4ca6d8f
Jules Villard
Artem Pianykh
Nikos Gorogiannis
Yangshun Tay
BSKY
Sungkeun Cho
Mitya Lyubarskiy
Dulma Churchill
Phoebe Nichols
Martin Trojer
Josh Berdine
Nikos Gorogiannis
Martino Luca
