Summary: Use the Hashtbl functions directly as `Cfg` knows that a cfg is a hashtbl.
Reviewed By: sblackshear, jeremydubreil
Differential Revision: D6727732
fbshipit-source-id: 2cdda91
Summary:
- After completing program translation, infer logs # of attempted procedure translations and # of completed procedure translations via EventLogger
- New possible type of event in EventLogger
Reviewed By: dulmarod
Differential Revision: D6711662
fbshipit-source-id: 5e31332
Summary:
- After completing program translation, infer logs # of attempted procedure translations and # of completed procedure translations
- New global state in cFrontend_config.ml to represent # of attempted procedure translations and # of failed procedure translations
- Will be integrated with logging framework
Reviewed By: dulmarod
Differential Revision: D6703248
fbshipit-source-id: 10c916a
Summary:
Instead of storing the cfgs of source files inside their own individual files,
put them in results.db, in their own table. (that table may change in the
future to map source files to more than just their cfgs, eg their tenv as well)
Reviewed By: jberdine
Differential Revision: D6297201
fbshipit-source-id: 7fa891d
Summary: In every place this was used except one, `debug_mode` is also used as a gate.
Reviewed By: jeremydubreil
Differential Revision: D6450913
fbshipit-source-id: 6a5716d
Summary:
Install ocamlformat from github as part of `make devsetup`, and use it
for formatting OCaml (and jbuild) code.
Reviewed By: jvillard
Differential Revision: D6092464
fbshipit-source-id: 4ba0845
Summary:
Conversion and reformat of infer source using ocamlformat
auto-formatting tool.
Current status:
- Because Reason does not handle docstrings, the output of the
conversion is not 'Warning 50'-clean, meaning that there are
docstrings with ambiguous placement. I'll need to manually fix
them just before landing.
Reviewed By: jvillard
Differential Revision: D5225546
fbshipit-source-id: 3bd2786
Summary:
Change the API of `Logging` wrt to writing to files and to the console (see
changes in logging.mli).
Write only to one log file: infer-out/log. Prefix each line with the kind of
warning and the PID of the process emitting it. Writing with `O_APPEND` is
atomic so the file should not get garbled by concurrent writes. To get the
output of a single process, find out which one interests you by looking at
infer-out/log, then `grep ^[<PID>] infer-out/log`.
Introduce 3 log levels for debug output and command-line options to set them
for various categories individually.
Change tons of `"\n"` to `"@\n"` so the `Format` module is aware of newlines
without us having to look through every character of every logged string for
`\n` characters.
Reviewed By: mbouaziz
Differential Revision: D5165317
fbshipit-source-id: 93c922f
Summary: This function is always used in the frontend where summaries don't exist yet
Reviewed By: akotulski
Differential Revision: D4979132
fbshipit-source-id: 8d49c52
Summary:
Limit the use of `SourceFile.invalid` (renamed from `SourceFile.empty`) as much
as possible. In particular, do not generate bogus procnames for external global
variables: their translation unit was set to the invalid source file, now we
distinguish between extern/non-extern global variables more explicitly.
`SourceFile.invalid` is still used in too many places to actually remove it, often as a dummy initial value that never gets used, but sometimes as an actual value... Worse, we cannot fail on all operations on `SourceFile.Invalid` yet: the `SourceFile.to_string` method is used in too many places where it could get `SourceFile.Invalid` as argument. It's easy to see where it's used by making it raise in the code, then running the tests. This results in spaghetti backtraces that are hard to trace back to a root cause.
Reviewed By: akotulski, jeremydubreil
Differential Revision: D4860019
fbshipit-source-id: 45be040
Summary: procnames will depend on Typ.t soon and we need to go from `type_ptr` to `Typ.t` when creating procnames. `CType_decl` does this translation it can't depend on `mk_procname_` functions.
Reviewed By: jvillard
Differential Revision: D4620560
fbshipit-source-id: 9524178
Summary:
Module CFrontend_utils is a container for two modules: Ast_utils and General_utils.
Instead of opening CFrontend_utils in several places, it is now split into two separate modules CAst_utils and CGeneral_utils, which are now accessed directly.
Reviewed By: jberdine
Differential Revision: D4392710
fbshipit-source-id: ea756a2
Summary: Allow backend to trigger compilation of extra files when it needs them. This will allow infer to capture less files initally and possibly speed up compilation
Reviewed By: cristianoc, jberdine
Differential Revision: D4231581
fbshipit-source-id: 181abea
Summary:
Utils contains definitions intended to be in the global namespace for
all of the infer code-base, as well as pretty-printing functions, and
assorted utility functions mostly for dealing with files and processes.
This diff changes the module opened into the global namespace to
IStd (Std conflict with extlib), and moves the pretty-printing
definitions from Utils to Pp.
Reviewed By: jvillard
Differential Revision: D4232457
fbshipit-source-id: 1e070e0
Summary:
Functions related to source files were already namespaced by `source_file_` prefix. Make separate module for them.
In high level it replaces all `source_file_` with `SourceFile.` and then fixes all remaining compilation errors
Reviewed By: jvillard
Differential Revision: D4299053
fbshipit-source-id: 20b1d39
Summary:
`DB.source_file_to_string` is very easy to misuse and it shouldn't even exist.
In preparation for that day, replace most of `source_file_to_string` with `source_file_pp`
Reviewed By: jvillard
Differential Revision: D4258390
fbshipit-source-id: 447cf5a
Summary:
Dealing with symbolic links in project root is tricky. To avoid it, always normalize all paths to sources with `realpath`.
Changes to tests are expected - infer started to resolve symbolic links which screws up with our testing mechanism.
Reviewed By: jberdine
Differential Revision: D4237587
fbshipit-source-id: fe1cb01
Summary:
Location.nLOC was introducing a lot of complexity for little benefit (and edge cases were wrong anyway).
We can restore it in some simplified way if we find that we need it
Reviewed By: jeremydubreil
Differential Revision: D4139868
fbshipit-source-id: 4f8e033
Summary:
Fix an issue where, when `-reactive` mode is used, files captured in the first second are not considered modified, and are not analyzed. This happens because file timestamps are used, and the resolution is one second.
Change the front-ends to change the timestamp of the directory where artifacts are created, so that the timestamps are 1 second in the future.
Small reactive commands such as the following now analyze correctly:
rm -rf infer-out && infer --reactive -- clang -c test.c
Reviewed By: jberdine
Differential Revision: D4050689
fbshipit-source-id: 6271860
Summary:
This is needed for later: InferClang will no longer be started once for each
source file to be analysed. Instead, it will be called to analyse several files
at once, and will analyse them one by one. Thus, `clang_lang` and `source_file`
are moved to `cFrontend_config` as references.
The biggest change this entailed was the new logging infrastructure, which was
depending on `Config.source_file`. This diff moves the logic entirely to
`Logging`, and changes the API so that executables wishing to log into files
have to set it up using `Logging.set_log_file_identifier`. This can be called
several times during the execution, allowing to dynamically change the log file
(eg, when analysing several source files one by one!).
Reviewed By: jberdine
Differential Revision: D3944148
fbshipit-source-id: 6129090
Summary:
- Use the module types in cModule_types.ml instead of redefining them.
- A few occurrences of \n in formatted output replaced by @\n to let the
formatter know of line breaks (by no means complete, these were just a few I
came across while doing something else)
Reviewed By: jberdine
Differential Revision: D3944081
fbshipit-source-id: 4460427
Summary:
The global reference `DB.current_source` is used internally in the module DB, by all the front-ends, and directly and indirectly by the back-end, including saving and restoring the state in case of on-demand procedure calls. In particular, it is heavily used in printing functions.
This diff cleans up the flow of information about what the current file is, making it explicit, and removes the reference.
Reviewed By: jberdine
Differential Revision: D3901247
fbshipit-source-id: ef596bd
Summary:
Adding a new mode linters. Now if the analyzer is linters, we do the linters and don't translate,
then, if the analyzer is Infer, we do the translation and the backend and not the linters checks, and the
default is that we do capture, backend and lint checks.
Made the tests separated, which saves time and also shows that the linters mode works.
Reviewed By: jvillard
Differential Revision: D3723472
fbshipit-source-id: 9d828d8
Summary:
Reimplement command line options in preparation for uniformly passing
options from the top-level infer driver that invokes a build command
through the build system to the descendant infer processes.
All command line options of all executables are collected into Config,
and declared using a new CommandLineOption module that supports
maintining backward compatibility with the current command line
interface. Very few values representing command line options are
mutable now, as they are set once during parsing but are constant
thereafter. All ordering dependencies are contained within the
implementation of Config, and the implementation of Config is careful to
avoid unintended interactions and ordering dependencies between options.
Reviewed By: jvillard
Differential Revision: D3273345
fbshipit-source-id: 8e8c6fa
Summary:public
Report statistics on consumed time and memory in results_dir/perf_stats.json.
Reviewed By: martinoluca
Differential Revision: D3162381
fb-gh-sync-id: e802faa
fbshipit-source-id: e802faa
Summary:public
Instead of translating code from headers blindly, translate only gets transitively referenced from source code.
It won't translate functions from system headers, but in the future we could do that as well
since most of them aren't used and it shouldn't add much overhead.
For now this functionality is hidden behind --cxx-experimental flag
Reviewed By: dulmarod
Differential Revision: D3163519
fb-gh-sync-id: 0c53b10
fbshipit-source-id: 0c53b10
Summary:public
Eliminate the use of the -open Utils command line option passed to the compiler in favor of `open! Utils` in each source file. While slightly convenient, this option causes more headaches than it is worth with other tools e.g. merlin.
Reviewed By: jvillard
Differential Revision: D3168193
fb-gh-sync-id: 4285ef6
fbshipit-source-id: 4285ef6
Summary:public
This information is no longer needed - ASTExporter always exports pointer to parent for C++/objC methods.
This code is from time it was not true.
Reviewed By: jvillard
Differential Revision: D3162455
fb-gh-sync-id: 35570da
fbshipit-source-id: 35570da
Summary: public Like the pre-analysis, these should be called for every CFG. This is a stepping stone toward getting rid of remove_tmps and making it part of the liveness analysis.
Reviewed By: jvillard
Differential Revision: D3059021
fb-gh-sync-id: 3a8d818
shipit-source-id: 3a8d818
Summary:public
This diff refactors the current recursive module. It simplifies the structure
making CMethod_decl redoundand.
The idea is to have now two recursive functors: cTrans.ml and cFrontend.ml.
The first dealing with all the expressions and the latter dealing with all
the declarations (in a later diff, we may want to change names of these moules
to reflect Expr and Decl).
This structure will enable to implement lambdas. The previous version
would require some more complex solution where another recursive module
would be involved.
I'm breaking the refactoring in several diffs to make it easier to review.
Reviewed By: akotulski
Differential Revision: D3035122
fb-gh-sync-id: 7dabe9e
shipit-source-id: 7dabe9e