Fix UART controller for malta, now input works!

Signed-off-by: Harry Chen <i@harrychen.xyz>

kernel/src/arch/mipsel/board/malta/mod.rs

@@ -2,7 +2,7 @@ use once::*;
 use alloc::string::String;
 use mips::registers::cp0;
 
-#[path = "../../../../drivers/serial/16550_reg.rs"]
+#[path = "../../../../drivers/serial/ti_16c550c.rs"]
 pub mod serial;
 #[path = "../../../../drivers/gpu/fb.rs"]
 pub mod fb;

kernel/src/arch/mipsel/interrupt.rs

@@ -132,13 +132,15 @@ fn syscall(tf: &mut TrapFrame) {
     let arguments = [tf.a0, tf.a1, tf.a2, tf.a3, tf.t0, tf.t1];
     trace!("MIPS syscall {} invoked with {:?}", tf.v0, arguments);
 
-    let ret = crate::syscall::syscall(tf.v0, arguments, tf);
+    let ret = crate::syscall::syscall(tf.v0, arguments, tf) as isize;
-    let ret = tf.v0 as isize;
     // comply with mips n32 abi, always return a positive value
     // https://git.musl-libc.org/cgit/musl/tree/arch/mipsn32/syscall_arch.h
     if (ret < 0) {
         tf.v0 = (-ret) as usize;
         tf.a3 = 1;
+    } else {
+        tf.v0 = ret as usize;
+        tf.a3 = 0;
     }
 }
 

kernel/src/drivers/serial/ti_16c550c.rs

@@ -0,0 +1,110 @@
+//! TI 16c550c serial adapter driver for malta board
+
+#![allow(dead_code)]
+
+use core::fmt::{Write, Result, Arguments};
+use core::ptr::{read_volatile, write_volatile};
+use spin::Mutex;
+
+pub struct SerialPort {
+    base: usize
+}
+
+impl SerialPort {
+    fn new() -> SerialPort {
+        SerialPort { 
+            base: 0
+        }
+    }
+
+    pub fn init(&mut self, base: usize) {
+        self.base = base;
+        // Turn off the FIFO
+        // write(self.base + COM_FCR, 0 as u8);
+        // Set speed; requires DLAB latch
+        // write(self.base + COM_LCR, COM_LCR_DLAB);
+        // write(self.base + COM_DLL, (115200 / 9600) as u8);
+        // write(self.base + COM_DLM, 0 as u8);
+
+        // 8 data bits, 1 stop bit, parity off; turn off DLAB latch
+        // write(self.base + COM_LCR, COM_LCR_WLEN8 & !COM_LCR_DLAB);
+
+        // No modem controls
+        // write(self.base + COM_MCR, 0 as u8);
+        // Enable rcv interrupts
+        write(self.base + COM_INT_EN, 0x1);
+    }
+
+    /// non-blocking version of putchar()
+    pub fn putchar(&mut self, c: u8) {
+        write(self.base + COM_TX, c);
+    }
+
+    /// blocking version of getchar()
+    pub fn getchar(&mut self) -> char {
+        loop {
+            if (read::<u8>(self.base + COM_LSR) & 0x01) == 0 {
+                break;
+            }
+        }
+        let c = read::<u8>(self.base + COM_RX);
+        match c {
+            255 => '\0',   // null
+            c => c as char,
+        }
+    }
+
+    /// non-blocking version of getchar()
+    pub fn getchar_option(&mut self) -> Option<char> {
+        match read::<u8>(self.base + COM_LSR) & 0x01 {
+            0 => None,
+            _ => Some(read::<u8>(self.base + COM_RX) as u8 as char),
+        }
+    }
+
+    pub fn putfmt(&mut self, fmt: Arguments) {
+        self.write_fmt(fmt).unwrap();
+    }
+
+}
+
+impl Write for SerialPort {
+    fn write_str(&mut self, s: &str) -> Result {
+        for c in s.bytes() {
+            if c == 127 {
+                self.putchar(8);
+                self.putchar(b' ');
+                self.putchar(8);
+            } else {
+                self.putchar(c);
+            }
+        }
+        Ok(())
+    }
+}
+
+fn write<T>(addr: usize, content: T) {
+    let cell = (addr) as *mut T;
+    unsafe { write_volatile(cell, content); }
+}
+
+fn read<T>(addr: usize) -> T {
+    let cell = (addr) as *const T;
+    unsafe { read_volatile(cell) }
+}
+
+
+const COM_RX     :usize = 0x00;   // In:  Receive buffer (DLAB=0)
+const COM_TX     :usize = 0x00;   // Out: Transmit buffer (DLAB=0)
+const COM_INT_EN :usize = 0x08;   // In:  Interrupt enable
+const COM_INT_ID :usize = 0x10;   // Out: Interrupt identification
+const COM_LSR    :usize = 0x28;   // In:  Line status register
+
+
+lazy_static! {
+    pub static ref SERIAL_PORT: Mutex<SerialPort> = Mutex::new(SerialPort::new());
+}
+
+pub fn init(base: usize) {
+    SERIAL_PORT.lock().init(base);
+}