Copy entrystart.S from xv6 x86_64, translate it to nasm, link @ 0x7000.

Makefile

@@ -14,20 +14,20 @@ qemu_opts := -cdrom $(iso) -smp 2 -serial mon:stdio
 features := use_apic
 
 ifdef travis
-	test := 1
-	features := $(features) qemu_auto_exit
+test := 1
+features := $(features) qemu_auto_exit
 endif
 
 ifdef test
-	features := $(features) test
-	# enable shutdown inside the qemu 
-	qemu_opts := $(qemu_opts) -device isa-debug-exit 
+features := $(features) test
+# enable shutdown inside the qemu
+qemu_opts := $(qemu_opts) -device isa-debug-exit
 endif
 
 ifeq ($(shell uname), Linux)
-	prefix :=
+prefix :=
 else
-	prefix := x86_64-elf-
+prefix := x86_64-elf-
 endif
 
 ld := $(prefix)ld

src/arch/x86_64/boot/entryother.asm

@@ -0,0 +1,94 @@
+; xv6 x86_64 entryother.S
+
+; Each non-boot CPU ("AP") is started up in response to a STARTUP
+; IPI from the boot CPU.  Section B.4.2 of the Multi-Processor
+; Specification says that the AP will start in real mode with CS:IP
+; set to XY00:0000, where XY is an 8-bit value sent with the
+; STARTUP. Thus this code must start at a 4096-byte boundary.
+;
+; Because this code sets DS to zero, it must sit
+; at an address in the low 2^16 bytes.
+;
+; Startothers (in main.c) sends the STARTUPs one at a time.
+; It copies this code (start) at 0x7000.  It puts the address of
+; a newly allocated per-core stack in start-4,the address of the
+; place to jump to (mpenter) in start-8, and the physical address
+; of entrypgdir in start-12.
+;
+; This code is identical to bootasm.S except:
+;   - it does not need to enable A20
+;   - it uses the address at start-4, start-8, and start-12
+
+%define CR0_PE 1
+%define STA_X       0x8     ; Executable segment
+%define STA_E       0x4     ; Expand down (non-executable segments)
+%define STA_C       0x4     ; Conforming code segment (executable only)
+%define STA_W       0x2     ; Writeable (non-executable segments)
+%define STA_R       0x2     ; Readable (executable segments)
+%define STA_A       0x1     ; Accessed
+
+global otherstart
+
+section .text
+bits 16
+otherstart:
+  cli
+
+  xor    ax, ax
+  mov    ds, ax
+  mov    es, ax
+  mov    ss, ax
+
+  lgdt   [gdt.desc]
+  mov    eax, cr0
+  or     eax, CR0_PE
+  mov    cr0, eax
+
+;PAGEBREAK!
+  jmp    gdt.kcode: start32
+
+bits 32
+start32:
+  mov    ax, gdt.kdata
+  mov    ds, ax
+  mov    es, ax
+  mov    ss, ax
+  mov    ax, 0
+  mov    fs, ax
+  mov    gs, ax
+
+  ; defer paging until we switch to 64bit mode
+  ; set ebx=1 so shared boot code knows we're booting a secondary core
+  mov    ebx, 1
+
+  ; Switch to the stack allocated by startothers()
+  mov    esp, [otherstart-4]
+  ; Call mpenter()
+  call	 [otherstart-8]
+
+  mov    ax, 0x8a00
+  mov    dx, ax
+  out    dx, ax
+  mov    ax, 0x8ae0
+  out    dx, ax
+spin:
+  jmp    spin
+
+section .bss
+  resb 4096
+
+section .rodata
+align 4
+gdt:
+  ; NULL
+  dw    0, 0
+  db    0, 0, 0, 0
+.kcode: equ $ - gdt
+  dw    0xffff, 0
+  db    0, (0x90 | STA_X | STA_R), 0xcf, 0
+.kdata: equ $ - gdt
+  dw    0xffff, 0
+  db    0, (0x90 | STA_W), 0xcf, 0
+.desc:
+  dw   ($ - gdt - 1)
+  dq   gdt

src/arch/x86_64/boot/linker.ld

@@ -1,9 +1,28 @@
 ENTRY(start)
 
+OTHER_OFFSET = 0x7000;
 BOOT_OFFSET = 0x100000;
 KERNEL_OFFSET = 0xffffff0000000000;
 
 SECTIONS {
+
+  . = OTHER_OFFSET - 0x1000;
+  .bss.other :
+  {
+    KEEP(*/entryother.o (.bss))
+    . = ALIGN(4K);
+  }
+  .text.other :
+  {
+    KEEP(*/entryother.o (.text))
+    . = ALIGN(4K);
+  }
+  .rodata.other :
+  {
+    KEEP(*/entryother.o (.rodata))
+    . = ALIGN(4K);
+  }
+
   . = BOOT_OFFSET;
 
   .rodata.32 :