p39718465
/
zabbix
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from '5ffdfec1e0'
${ noResults }
zabbix/templates/net/morningstar/morningstar_suresine_snmp/README.md

9.0 KiB
Raw Blame History Escape

Morningstar SureSine by SNMP

Overview

This template is designed for the effortless deployment of Morningstar SureSine monitoring by Zabbix via SNMP and doesn't require any external scripts.

Requirements

Zabbix version: 7.0 and higher.

Tested versions

This template has been tested on:

  • Morningstar SureSine

Configuration

Zabbix should be configured according to the instructions in the Templates out of the box section.

Setup

Refer to the vendor documentation.

Macros used

Name Description Default
{$BATTERY.TEMP.MIN.WARN}

Battery low temperature warning value

 0
{$BATTERY.TEMP.MAX.WARN}

Battery high temperature warning value

 45
{$BATTERY.TEMP.MIN.CRIT}

Battery low temperature critical value

 -20
{$BATTERY.TEMP.MAX.CRIT}

Battery high temperature critical value

 60
{$VOLTAGE.MIN.WARN}
{$VOLTAGE.MAX.WARN}
{$VOLTAGE.MIN.CRIT}
{$VOLTAGE.MAX.CRIT}
{$CHARGE.STATE.WARN}

disconnect

 2
{$CHARGE.STATE.CRIT}

fault

 4
{$LOAD.STATE.WARN:"lvdWarning"}

lvdWarning

 2
{$LOAD.STATE.WARN:"disconnect"}

disconnect

 5
{$LOAD.STATE.WARN:"override"}

override

 7
{$LOAD.STATE.CRIT:"lvd"}

lvd

 3
{$LOAD.STATE.CRIT:"fault"}

fault

 4

Items

Name Description Type Key and additional info
Status: Uptime (network)

The time (in hundredths of a second) since the network management portion of the system was last re-initialized.

 SNMP agent status.net.uptime

Preprocessing

  • Custom multiplier: 0.01
Status: Uptime (hardware)

The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.

 SNMP agent status.hw.uptime

Preprocessing

  • Check for not supported value

    ⛔️Custom on fail: Set value to: 0

  • Custom multiplier: 0.01
Battery: Battery Voltage discovery

MIB: SURESINE

 SNMP agent battery.voltage.discovery[batteryVoltageSlow.0]

Preprocessing

  • Custom multiplier: 2.581787109375E-4

  • Regular expression: ^(\d+)(\.\d{1,2})? \1\2
Load: State

MIB: SURESINE

Description:Load State

Modbus address:0x000B

0: Start

1: LoadOn

2: LvdWarning

3: LowVoltageDisconnect

4: Fault

5: Disconnect

6: NormalOff

7: UnknownState

8: Standby

 SNMP agent load.state[loadState.0]

Preprocessing

  • Discard unchanged with heartbeat: 1h
Load: A/C Current

MIB: SURESINE

Description:AC Output Current

Scaling Factor:0.0001953125

Units:A

Range:[0.0, 17]

Modbus address:0x0005

 SNMP agent load.ac_current[acCurrent.0]

Preprocessing

  • Custom multiplier: 1.953125E-4

  • Regular expression: ^(\d+)(\.\d{1,2})? \1\2
Temperature: Heatsink

MIB: SURESINE

Description:Heatsink Temperature

Scaling Factor:1

Units:C

Range:[-128, 127]

Modbus address:0x0006

 SNMP agent temp.heatsink[heatsinkTemperature.0]
Status: Faults

MIB: SURESINE

Description:Faults

Modbus address:0x0007

 SNMP agent status.faults[faults.0]

Preprocessing

  • Discard unchanged with heartbeat: 1h

  • JavaScript: The text is too long. Please see the template.
Status: Alarms

MIB: SURESINE

Description:Faults

Modbus address:0x0007

 SNMP agent status.alarms[alarms.0]

Preprocessing

  • Discard unchanged with heartbeat: 1h

  • JavaScript: The text is too long. Please see the template.

Triggers

Name Description Expression Severity Dependencies and additional info
Status: Device has been restarted

Uptime is less than 10 minutes.

 (last(/Morningstar SureSine by SNMP/status.hw.uptime)>0 and last(/Morningstar SureSine by SNMP/status.hw.uptime)<10m) or (last(/Morningstar SureSine by SNMP/status.hw.uptime)=0 and last(/Morningstar SureSine by SNMP/status.net.uptime)<10m) Info Manual close: Yes
Status: Failed to fetch data

Zabbix has not received data for items for the last 5 minutes.

 nodata(/Morningstar SureSine by SNMP/status.net.uptime,5m)=1 Warning Manual close: Yes
Load: Device load in warning state last(/Morningstar SureSine by SNMP/load.state[loadState.0])={$LOAD.STATE.WARN:"lvdWarning"} or last(/Morningstar SureSine by SNMP/load.state[loadState.0])={$LOAD.STATE.WARN:"override"} Warning Depends on:
  • Load: Device load in critical state
Load: Device load in critical state last(/Morningstar SureSine by SNMP/load.state[loadState.0])={$LOAD.STATE.CRIT:"lvd"} or last(/Morningstar SureSine by SNMP/load.state[loadState.0])={$LOAD.STATE.CRIT:"fault"} High
Status: Device has "reset" faults flag count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","reset")=2 High
Status: Device has "overcurrent" faults flag count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","overcurrent")=2 High
Status: Device has "unknownFault" faults flag count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","unknownFault")=2 High
Status: Device has "software" faults flag count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","software")=2 High
Status: Device has "highVoltageDisconnect" faults flag count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","highVoltageDisconnect")=2 High
Status: Device has "suresineHot" faults flag count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","suresineHot")=2 High
Status: Device has "dipSwitchChanged" faults flag count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","dipSwitchChanged")=2 High
Status: Device has "customSettingsEdit" faults flag count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","customSettingsEdit")=2 High
Status: Device has "heatsinkTempSensorOpen" alarm flag count(/Morningstar SureSine by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorOpen")=2 Warning
Status: Device has "heatsinkTempSensorShort" alarm flag count(/Morningstar SureSine by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorShort")=2 Warning
Status: Device has "unknownAlarm" alarm flag count(/Morningstar SureSine by SNMP/status.alarms[alarms.0],#3,"like","unknownAlarm")=2 Warning
Status: Device has "suresineHot" alarm flag count(/Morningstar SureSine by SNMP/status.alarms[alarms.0],#3,"like","suresineHot")=2 Warning

LLD rule Battery voltage discovery

Name Description Type Key and additional info
Battery voltage discovery

Discovery for battery voltage triggers

 Dependent item battery.voltage.discovery

Preprocessing

  • JavaScript: The text is too long. Please see the template.

Item prototypes for Battery voltage discovery

Name Description Type Key and additional info
Battery: Voltage{#SINGLETON}

MIB: SURESINE

Description:Battery Voltage(slow)

Scaling Factor:0.0002581787109375

Units:V

Range:[0.0, 17.0]

Modbus address:0x0004

 SNMP agent battery.voltage[batteryVoltageSlow.0{#SINGLETON}]

Preprocessing

  • Custom multiplier: 2.581787109375E-4

  • Regular expression: ^(\d+)(\.\d{1,2})? \1\2

Trigger prototypes for Battery voltage discovery

Name Description Expression Severity Dependencies and additional info
Battery: Low battery voltage max(/Morningstar SureSine by SNMP/battery.voltage[batteryVoltageSlow.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.WARN} Warning Depends on:
  • Battery: Critically low battery voltage
Battery: Critically low battery voltage max(/Morningstar SureSine by SNMP/battery.voltage[batteryVoltageSlow.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.CRIT} High
Battery: High battery voltage min(/Morningstar SureSine by SNMP/battery.voltage[batteryVoltageSlow.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.WARN} Warning Depends on:
  • Battery: Critically high battery voltage
Battery: Critically high battery voltage min(/Morningstar SureSine by SNMP/battery.voltage[batteryVoltageSlow.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.CRIT} High

Feedback

Please report any issues with the template at https://support.zabbix.com

You can also provide feedback, discuss the template, or ask for help at ZABBIX forums